Beruflich Dokumente
Kultur Dokumente
terms and conditions: All prices in CHF without VAT and taxes. Prices, availability and specifications subject to change all prices FOB shipping point Vaduz, Liechtenstein.
distributed by Sauter Electronic AG Alvierweg 17 9490 Vaduz Frstentum Liechtenstein Telefon +423 237 57 37 Fax +423 232 03 36
table of content
central unit .......................................................................................3 power supply unit ..............................................................................4 control panel .....................................................................................5 touch screen .....................................................................................6 code entry unit ..................................................................................7 multi I/O device.................................................................................8 input device ......................................................................................9 mini device...................................................................................... 10 relay device..................................................................................... 11 radio controlled clock device ............................................................. 12 card reader device ........................................................................... 13 printer interface device .................................................................... 14 repeater / converter......................................................................... 15 S8 Interface .................................................................................... 16 temperature and humidity sensor...................................................... 17 housing for CPU/PSU ....................................................................... 18 power supply board ......................................................................... 19 radio receiver module ...................................................................... 20 battery powered receiver.................................................................. 21 picture monitoring unit..................................................................... 22
central unit
CPU, central unit part no. N101
All devices contain an intelligent communication addressed directly to the central unit. The central unit controls the alarm system, and handles the multiple communication to the outside world. It further secures the proper handling of the user and database.
housing: dimension:
consisting of: CPU board with 32MB flash memory and Ethernet connector BUS board with 3 x RS 485 NOX alarm bus PSU unit, 3A (accus, 2x17Ah, not included) MIO card with 8 relays and four monitored siren and flash output Built into steel casing, PSU, all other listed devices and space for an optional alarm transmission unit, sabotage contact TPS/SVV certified for category 3 (Switzerland)
Uninterruptible power supply with accumulator backup. This unit provides interruption free DC supply to the NOX alarm bus, it also monitors AC failure, AC high/low, accu failure, over temperature and the actual output power. The unit comes with a housing holding the PSU, accus and depending on configuration, interface and relay devices
housing: dimension:
consisting of: transformer 230V/50Hz (115V/60Hz available on request) regulator board with onboard check system 3A maximum output power mains plug with filter housing stainless, with sabotage detection tray for two accus with 2x17Ah (up to 30hours backup power)
control panel
CPA, control panel part no. N110
The control panel is used to operate the alarm system. It has a numeric keypad and a white light graphic display with 128 x 64 pixel
housing: dimensions:
Aluminium, with sabotage detection AP L 175mm, W 110mm, H 23mm UP L 212mm, W 148mm, H 23mm
consisting of: housing Aluminium, with sabotage detection foil, grey and graphic display with 128 x 64 pixels controller board with alarm bus terminal
touch screen
TPA, 10.4 touch panel Art. Nr. N111
The touch screen with 10.4 inch screen diagonal allows to operate the NOX security system by finger touch directly on graphic floor plans in color.
housing: dimensions:
consisting of: 10.4 display i plastic housing resistive Touch Screen Ethernet interface for fast connection to NOX CPU
The code entry unit is a numeric keypad with indicators. It is typically used to arm/disarm different areas or it can alternatively be used to trigger an electrical door opener.
variant in wall
consisting of: housing Aluminium, with sabotage detection foil, grey two LED (green/red) for status display board with NOX alarm bus terminal
This external MIO unit, not installed inside central housing is used to connect flash lights and/or a siren. Special feature of the MIO are four monitored outputs used to connect acoustic or optic indicators (e.g. siren or flash lights). These monitored outputs can alternatively be used as standard resistance monitored inputs. Another additional eight relay outputs are available on the MIO board. maximum relay switching power: 30V/1A
features: 8 relay outputs 4 monitored outputs OR 4 resistance inputs / 4 open collector outputs consisting of: housing plastic, white with sabotage detection controller board with NOX alarm bus terminal
input device
IN4, input unit part no. N120
The IN4 is a universal input device with four resistance-monitored inputs for connection to the NOX alarm bus. It connects alarm units and detectors with the system. A unique feature of this unit is the programmable input resistance level. It is possible to adjust the resistance surveillance level between 3 to 40k inn order to enable connection of a wide range of all types detectors and sensors. Additionally every input has a programmable delay time to adjust the alarm trigger to any specific requirement.
housing: dimensions:
consisting of: housing plastic, with sabotage detection intelligent board with NOX alarm bus terminal
mini device
m31, mini i/o module part no. N121
The M31 is a very small and compact module with an open collector output and 3 inputs. This module is designed to be integrated into the detector. The inputs are not resistant supervised.
dimensions:
relay device
RE4, relay output unit part no. N122
RE4 is a universal output device with four freely programmable relay outputs. The device is connected and supplied through the NOX alarm bus. No additional supply is needed. maximum relay switching power: 30V/1A
housing: dimensions:
consisting of: housing plastic, with sabotage detection relay board with NOX alarm bus terminal
To assure an accurate time for all alarm loggings a radio controlled clock interface can be connected to the alarm bus. A DCF-77 receiver unit is connected to the DCF interface. The DCF-77 signal is aired out of Frankfurt (D) throughout countries in Europe.
housing: dimensions:
consisting of: housing plastic, with sabotage detection interface board with NOX alarm bus terminal
housing: dimensions:
consisting of: housing plastic, with sabotage detection board with NOX alarm bus terminal two LED outputs for status display versions: N115 CRD N116 CRA N118 CRB N119 CRC card card card card reader reader reader reader interface interface interface interface with with with with 26bit Wiegand Data/Clock interface Omron protocol 40bit Wiegand 27bit and 40bit Wiegand for HID iCLASS
Serial printer interface to connect peripheral RS-232 serial printer devices to the NOX alarm bus.
housing: dimensions:
consisting of: housing plastic, with sabotage detection board with NOX alarm bus terminal
repeater / converter
RPT, repeater / converter device part no. N141
Universal bus repeater (RS485) or serial interface (RS232), configurable by on board jumper. It allows to extend a bus wire length beyond the standard length and/or gives the possibility to separate the NOX alarm bus of specified sensor groups from others.
housing: dimensions:
consisting of: housing plastic, with sabotage detection board with NOX alarm bus terminal no external connector (NOXRPT)
S8 Interface
IS8, S8 interface device part no. N142
The IS8 Interface is used to connect bus unit from the SAEL S8 intruder detection system to the NOX alarm bus. The interface exists of two parts; a NOX converter and an S8 interface board.
plastic, white, with sabotage protection each housing L 85mm, W 66mm, H 27mm
consisting of: 2 housings plastic, with sabotage protection controller card with NOX bus terminal S8 interface card
consisting of: (internal sensor) housing intelligent board with integrated, combined sensor for temperature and humidity (external Sensor) combined temperature and humidity sensor fitted in a metal tube with 5m cable housing intelligent board
housing: dimension:
consisting of: housing stainless, white with sabotage detection tray for two accus with max. 2x17Ah tray for additional devices
Switched power supply unit. This unit provides interruption free DC supply to the NOX bus, it also monitors AC failure, AC high/low, accu failure, over temperature and the actual output power.
dimension:
consisting of: transformer 230V/50Hz (115V/60Hz available on request) regulator board with onboard check system 3A maximum output power mains plug with filter
Receiver module for 860MHz picture monitoring transmitter signals. The module is connected by a four wire cable to the NOX alarm bus. No other wires needed the unit is supplied through the bus cable. The unit is monitored against sabotage by the central unit.
housing: dimensions:
consisting of: housing plastic, with sabotage detection intelligent board with NOX alarm bus terminal
Portable , battery powered alarm receiver module for 860MHz picture monitoring transmitter signals. The compact module has a red alarm and battery low LED, a flashing in operation green LED and an on/off switch. The alarm signalisation is done by a built in beeper.
housing: dimensions:
consisting of: housing plastic, with belt clip intelligent board with red and green status LED and an integrated alarm beeper
The PMGS radio monitoring unit detects every soft movement or position shift of an objects. The sensitivity is adjustable in 8 steps through a simple micro switch. The unit does not contain Mercury or other toxic materials. It is CE certified and it does not interfere with other radio equipments.
figure shows real size! housing: dimensions: weight: plastic, white L 105mm, W 58mm, H 18.5mm 80g
consisting of: housing intelligent board and integrated antenna two 1.5V batteries AAA type