Beruflich Dokumente
Kultur Dokumente
No Particulars 01 Place where equipment to be supplied GENERAL To be completed by bidders Guaranteed Deviations if any Technical Particulars
Central Power Research Institute, Bangalore The crane shall be mobile type with minimum capacity of 10 tonne. The structural design shall be broadly as per IS:4573/1982. The Machine shall be provided with all: weather cabin, front bumper, rear view mirrors, tools and tackle box, battery cut off etc. First fill of all hydraulic oils and battery shall be supplied. Normal spares like grease can, spanner set shall be supplied. Preferably the manufacturer shall have ISO accreditation. The crane will be used in a high voltage Cables laboratory for lifting and placing equipments like cable terminations, bus ducts, isolators, CTs, PTs etc.
02
Scope:
03
TECHNICAL a) Around 10 tonnes at a distance of not less than 1.5 meters. b) Above load at maximum height of 5 meters
04
05
Maximum load lifting capacity at a distance of about 3.5 meters approximately Maximum lifting
06
Heavy duty transmission for crane application with mesh, spur teeth gearbox, travel speed of 25 kmph. Shall have a minimum turning radius of approximately 5 metres. Shall be of suitable design. Heavy duty, two part box type hydraulically operated. Shall be minimum of 8 tonnes. Suitable heavy duty tyres Safety hydraulic brakes to be provided to on hoist for stop or lift loads with the winch hoist. Special device shall be provided for hose protection for lift cylinders . a) Shall comprise of travel, Pin Vane Type Hydraulic pump. etc. b) 4 spool control valve with built in pressure relief for precision control. c) Proportional control type control valve, hydraulically operated through joy stick for lifting / lowering operations. Suitable diesel engine a) Front Wheel: Pneumatically assisted hydraulic brakes. b) Rear Wheel: Mechanical shoe brakes actuated through a slave cylinder. c) Parking: Shall be spring loaded brakes air released on rear axle
07 08 09 10 11 12
Steering Track(distance between centre of wheels) Telescoping (boom sections) Winch capacity for hoist Tyres Brakes
13 14
15 16
Engine
Brakes
17 18
Warranty Service
Minimum one year for the overall product or 1000 hours of operation with guaranteed replacement of vital parts in case of failure, free of cost. Service to be provided by local authorized agents for repair and maintenance in case of instrument breakdown or technical problems
Note: The compliance with each point of the specification shall be stated in clear terms.