Sie sind auf Seite 1von 11

Cisco Systems Close Window

Assessment System

1. Assessment Selection 2. Assessment Settings 3. Take Assessment Take Assessment - DsmbISP Final Exam - CCNA Discovery: Working at a Smal l-to-Medium Business or ISP (Version 4.1)

Time Remaining:

1 Refer to the exhibit. The network administrator of the building in the graphic n eeds to choose the type of cable best suited to add ServerB to the network. Whic h cable type is the best choice? STP UTP coaxial ans: fiber optic 2 Which protocol is used to send e-mail messages between two servers that are in d ifferent e-mail domains? HTTP POP3 ans: SMTP IMAP4 3 Which interface requires an IP address to transport IOS or configuration files f rom the router to a TFTP server on the LAN? USB ans: Ethernet console auxiliary 4 What is the primary function of the NOC at a large ISP? installing equipment at a customer site setting up customer accounts and passwords ans: monitoring and testing customer network connections

entering customer requirements in an order-tracking database 5 Why is the OSI model useful in network design and assessment? It combines specific networking tasks into a complex format. It defines the four lower layers, which standardize applications support ed within the model. It is used during troubleshooting to focus on the entire networking proc ess instead of a single layer. ans: It divides networking communications into multiple processes that are sm aller and more manageable. 6 Refer to the exhibit. Which two routes when either is configured on R1 would all ow traffic to be forwarded from hosts on network 192.168.10.0/24 to network 192. 168.20.0/24? (Choose two.) R1(config)# ip route 0.0.0.0 0.0.0.0 S0/0/1 ans: R1(config)# ip route 0.0.0.0 0.0.0.0 172.10.10.13 R1(config)# ip route 192.168.20.0 255.255.255.0 Fa0/0 ans: R1(config)# ip route 192.168.20.0 255.255.255.0 S0/0/0 R1(config)# ip route 172.10.10.12 255.255.255.252 192.168.20.0 7 What is an SLA? a tool to diagnose basic network connectivity issues a survey to obtain initial information about customer problems a program that shares remote desktops to diagnose customer issues an entry-level position that provides technicians with valuable experien ce ans: a contract that defines expectations between an organization and a servi ce vendor 8 Which AAA process requires users to prove their identity with a username and pas sword to gain access to a network? accounting authorization ans: authentication acknowledgment 9 When using NAT on a router, what is the term for the IP address of an inside hos t as it appears to the outside network? inside local ans: inside global outside local outside global 10 Refer to the exhibit. Based on the output of the show ip route command, how many hops are between this router and the 192.168.3.0 network? ans:1 3 ans: 4 5 120

11 Refer to the exhibit. R1 and R2 are configured with the commands that are displa yed. All interfaces are properly configured, but neither router is receiving rou ting updates. What two things can be done to solve the problem? (Choose two.) ans: Configure the routing protocol on R1 for network 10.0.0.0. ans: Configure the routing protocol on R2 for network 10.0.0.0. Configure the routing protocol on R1 for network 192.168.4.0. Configure the routing protocol on R1 for network 192.168.2.0. Configure the routing protocol on R2 for network 192.168.1.0. Configure the routing protocol on R2 for network 192.168.3.0. 12 In the URL http://dev.cisco.com/wwwdocs/procedures.htm, what is identified by ww wdocs? the server name where the resource is located the protocol that is used for the resource request the domain name of the server that is being accessed ans; the folder where the requested resource is stored 13 Refer to the exhibit. The network administrator must set up a network with two s ubnets. In network A, the network administrator selects the network address 192. 168.1.128/26. Which address combination should the administrator select in netwo rk B to accommodate the same number of hosts as in network A? 192.168.1.32 255.255.255.128 192.168.1.0 255.255.255.224 ans: 192.168.1.64 255.255.255.192 192.168.1.192 255.255.255.128 14 Refer to the exhibit. User A wants to send an e-mail to user B. To which IP addr ess and TCP port will the e-mail application that is used by user A send the mes sage? 10.5.12.6 port 25 10.5.12.6 port 110 10.5.12.70 port 25 10.5.12.70 port 110 ans: 192.168.1.5 port 25 192.168.1.5 port 110 15 When a router learns two paths to the same destination network, which two factor s determine the path that will be included in the routing table? (Choose two.) ans: route metric the MAC address of the neighboring router the source IP address in data packets the IP address of the next hop router ans: administrative distance Showing 1 of 4 Close Window <Prev Page: Next>

All contents copyright 1992-2012 Cisco Systems, Inc. Privacy Statement

and Trademarks. Cisco Systems Close Window

Assessment System

1. Assessment Selection 2. Assessment Settings 3. Take Assessment Take Assessment - DsmbISP Final Exam - CCNA Discovery: Working at a Smal l-to-Medium Business or ISP (Version 4.1)

Time Remaining:

16 Refer to the exhibit. Which routing protocol would likely be used to distribute routes between these routers? RIP ans: BGP OSPF EIGRP 17 Refer to the exhibit. The network administrator needs to configure the Fa0/0 int erface of RTB so that hosts from RTA can connect to the server that is attached to RTB. Which two commands will the administrator use to accomplish this task? ( Choose two.) RTB# ip address 192.168.102.98 255.255.255.248 RTB(config-if)# ip address 192.168.102.99 255.255.255.252 RTB(config)# ip address 192.168.102.97 255.255.255.252 RTB(config)# no shutdown ans: RTB(config-if)# no shutdown ans: RTB(config-if)# ip address 192.168.102.97 255.255.255.252 18 What is the purpose of the routing process? to encapsulate data that is used to communicate across a network ans: to select the paths that are used to direct traffic to destination netwo rks to convert a URL name into an IP address to provide secure Internet file transfer

to forward traffic on the basis of MAC addresses 19 Refer to the exhibit. What is the device named "Distribution"? a firewall a router ans: a switch an IP phone 20 A host needs to resolve the DNS name www.cisco.com and sends a request to the lo cal DNS server. The local DNS server does not have a record for www.cisco.com, s o it contacts one of the preconfigured root DNS servers. What will be the respon se from the root DNS server? ans: the IP address of www.cisco.com the IP address of another root DNS server the IP address of the cisco.com DNS server the IP address of the .com top level DNS server 21 Which statement is true about the reverse lookup DNS zone? It is most commonly experienced when users are surfing the Internet. It is the backup for the forward lookup zone. It dynamically updates the resource records. ans: It resolves an IP address to a fully qualified domain name. 22 Refer to the exhibit. A network administrator is troubleshooting the serial conn ection between R1 and R2. There is no communication between R1 and R2. Based on the output of the show ip interface brief command, what is the cause of the prob lem? ans: There is a misconfiguration of IP addresses. There is a mismatch of encapsulation methods. The no shutdown command should be issued on R2. The routing protocols are not compatible. 23 Which statement describes a feature of TCP? It provides low overhead data delivery. ans: It acknowledges the receipt of packets. It does not provide error checking. It is a connectionless protocol. 24 A hacker attempts to reach confidential information that is stored on a server i nside the corporate network. A network security solution inspects the entire pac ket, determines that it is a threat, and blocks the packet from entering the ins ide network. Which security measure protected the network? an IDS ans: an IPS a host-based firewall Anti-X software 25 A customer reports connectivity problems to an ISP technician. Upon questioning the customer, the technician discovers that all network applications are functio

ning except for FTP. What should the technician suspect is the problem? ans: misconfigured firewall bad port on switch or hub misconfigured IP addressing on the customer's workstation wrong DNS server configured on the customer's workstation wrong default gateway configured on the customer's workstation 26 Refer to the exhibit. Which two statements describe the data conversation shown? (Choose two.) ans: The data conversation was started by the HTTP application process runnin g on the client. The data conversation is identified by TCP port 80 on the client. The user started the data conversation by sending an e-mail. The IP address of the Internet server is 192.168.17.43. ans: The Internet server will send data to port 8547 on the client. 27 A user reports being unable to access the Internet. The help desk technician emp loys a bottom-up approach to troubleshooting. The technician first has the user check the patch cable connection from the PC to the wall, and then has the user verify that the NIC has a green link light. What will the technician have the us er do next? Enter an IP address into the WWW browser address bar to see if DNS is at fault. Use traceroute to identify the device along the path to the ISP that may be at fault. ans: Verify the IP address, subnet, and gateway settings using ipconfig on th e PC. Connect to the user home router to check firewall settings for blocked T CP ports. 28 For the assignment of permissions to files and folders, what does the "principle of least privilege" imply? No user has more privileges than any other user. Permissions to files are given based on seniority. ans: Users only have access to resources that are necessary for their jobs. Users should be given no access to computer resources until they ask. 29 To manage a Cisco switch using Telnet, where would the management IP address be configured on the switch? ans: VLAN 1 interface first vty port first trunk port console port FastEthernet 0/1 interface 30 Refer to the exhibit. Router Left is unable to ping router Right. The show inter faces serial 0/0/0 command indicates that the interface is up but the line proto col is down on both routers. Which action could be taken to establish connectivi ty between the two routers? Configure S0/0/1 instead of S0/0/0 on router Right. Enter the encapsulation hdlc command on router Right.

ans:

Contact the service provider to report that the circuit is down. Contact the service provider to enable PPP on the WAN circuit. Enter the no encapsulation ppp command on router Left S0/0/0. <Prev Page: Next>

Showing 2 of 4 Close Window

All contents copyright 1992-2012 Cisco Systems, Inc. Privacy Statement and Trademarks. Cisco Systems Close Window

Assessment System

1. Assessment Selection 2. Assessment Settings 3. Take Assessment Take Assessment - DsmbISP Final Exam - CCNA Discovery: Working at a Smal l-to-Medium Business or ISP (Version 4.1)

Time Remaining:

31 Which type of address is 192.168.17.111/28? host address network address ans: broadcast address multicast address 32 Which two commands ensure that any password that permits access to the privilege d EXEC mode is not shown in plain text when the configuration files are displaye d? (Choose two.) ans: Router(config)# enable secret cisco Router(config)# enable cisco Router(config)# encryption-password all Router(config)# enable login encrypted Router(config)# enable password encryption ans: Router(config)# service password-encryption 33 Refer to the exhibit. While configuring the serial interface of a router, the ne

twork administrator sees the highlighted error message. What is the reason for t his? The serial interface is administratively down. The serial interface is already configured with an IP address. ans: The network administrator has attempted to configure the serial interfac e with a broadcast address. The same IP address has been configured on another interface. 34 Refer to the exhibit. The startup configuration on switch S1 was erased and then the switch was power-cycled. The configuration that is shown in the exhibit has been entered by the administrator. An attempt by a management station on a diff erent network to verify remote Layer 3 connectivity with switch S1 fails. What c urrent configuration error on switch S1 could account for this problem? A default gateway was not established for the switch. All ports on the switch have been removed from VLAN 1. The management VLAN has been moved to a different VLAN. The no shutdown command on interface VLAN 1 has disabled the port. 35 Refer to the exhibit. A network administrator is unable to ping H1 from the rout er and is checking the cabling along the network. Which segment is incorrectly c abled? Segment A Segment B Segment C ans: Segment D 36 Which WAN connection provides a dedicated circuit with fixed bandwidth available at all times? ans: point-to-point circuit-switched packet-switched cable 37 Refer to the exhibit. The network administrator has added a route by using the i p route 10.13.13.0 255.255.255.0 192.168.1.1 command on R1. Hosts on the 10.12.1 2.0 network cannot communicate with hosts on the 10.13.13.0 network. What is the reason for this? ans: The gateway of last resort is not set. The destination prefix mask is incorrectly configured. The routing protocol has not been configured on R1. The static route has not been configured correctly. 38 Which two services are required to enable a computer to receive dynamic IP addre sses and access the Internet using domain names? (Choose two.) ans: DNS WINS HTTP ans: DHCP SMTP

39 What is the effect of issuing the hostname RouterA command on a router? A description will be configured on the router interfaces identifying th em as belonging to RouterA. The router will attempt to establish a connection to the host with the n ame RouterA. The router will map an IP address to the domain name RouterA. ans: The router prompt will change from Router(config)# to RouterA(config)# 40 The show ip route command was executed on one of the routers shown in the graphi c and the following output was displayed: C R R R C 192.168.4.0/24 192.168.5.0/24 192.168.1.0/24 192.168.2.0/24 192.168.3.0/24 is directly [120/1] via [120/2] via [120/2] via is directly connected, Serial0/0 192.168.4.2, 00:00:19, Serial0/0 192.168.3.1, 00:00:20, Serial0/1 192.168.3.1, 00:00:20, Serial0/1 connected, Serial0/1

From which router was this command executed? A B ans: C D 41 Refer to the exhibit. Which type of link is supported by this interface module? LAN ans: WAN WLAN VLAN 42 Refer to the exhibit. Which subnet mask would own for each subnetwork with the least amount 255.255.0.0 255.255.255.192 ans: 255.255.255.224 255.255.255.248 255.255.255.240 43 Refer to the exhibit. Which subnet mask would own for each subnetwork with the least amount destination network address source network address ans: source MAC address well known port destination address accommodate the number of hosts sh of IP addresses wasted?

accommodate the number of hosts sh of IP addresses wasted?

44 In designing a cabling upgrade plan, what is the first best practice that should be implemented? Suggest the location of the MDF and IDF. Choose the appropriate wiring.

ans:

Choose the new equipment to purchase. Examine the floor plan and the condition of existing wiring. Decide upon the cable management system.

45 Which protocol allows secure in-band management so that a network administrator can monitor and configure network devices without fear of any passwords being co mpromised? ans: SSH HTTP SNMP Telnet Showing 3 of 4 Close Window <Prev Page: Next>

All contents copyright 1992-2012 Cisco Systems, Inc. Privacy Statement and Trademarks. Cisco Systems Close Window

Assessment System

1. Assessment Selection 2. Assessment Settings 3. Take Assessment Take Assessment - DsmbISP Final Exam - CCNA Discovery: Working at a Smal l-to-Medium Business or ISP (Version 4.1)

Time Remaining:

46 A building has experienced a power outage. When the power returns, none of the d evices on one floor can access the Internet. The network administrator checks th e switch in the IDF that these devices are connected to and notes that the SYST LED on the front of the switch is amber. What is a possible cause of this problem? The switch is functioning properly. ans: The switch has failed POST. The switch configuration file was not saved to NVRAM. The connection between the switch and the server did not autonegotiate s peed and duplex properly.

47 What is the primary function of a Level 1 support technician in an ISP help desk department with multiple levels of customer support? to install hardware replacements for the customer to accompany an on-site technician to provide additional technical suppo rt ans: to diagnose and document the symptoms of hardware, software, and system problems to design network enhancements that support the new technology requireme nts of the customer 48 Refer to the exhibit. What does the ^ symbol indicate? It marks the end of an error message and an insert point nd. It marks the beginning of an error message and an insert command. ans: It marks a point in the command string where there is an recognized character. It marks a point in the command string where a parameter ed to complete the command configuration.

for a new comma point for a new incorrect or un has to be enter

49 What is the final step before a problem is considered fully resolved and the ass ociated trouble ticket is closed? ans: documentation of the solution successful testing of all equipment customer acceptance of the solution verification of resolution of all items on the trouble ticket 50 A network engineer is planning a new horizontal cable installation in an office building. What advantage would UTP cable have over fiber optic cable for this in stallation? ans: lower installation costs better protection from EMI higher transmission speeds longer unrepeated distance between endpoints Showing 4 of 4 Close Window <Prev Page: Next>

All contents copyright 1992-2012 Cisco Systems, Inc. Privacy Statement and Trademarks.

Das könnte Ihnen auch gefallen