Beruflich Dokumente
Kultur Dokumente
Custom starting solutions for most makes and sizes of diesel engines
Guaranteed starting for generators, engines and fire pumps in any conditions Starting solutions for the world's biggest oil and gas developments
Spring starters
IPU Starting Division design, manufacture, assemble and distribute a comprehensive range of engine starting solutions, which include:
Product range
Standard or custom built solutions including air starter, compressors, air receivers, control panels and if required, installation and on-site commissioning
Suitable for air starter motor applications and direct on head starting
Spring starters
Simple alternative or back-up start system for most applications Easy and reliable bolt-on starter
Jon Cheetham
Office: +33 (0) 2 54 72 63 00 Mobile: +44 (0) 7825 944 050 Email: jon.cheetham@ipu.co.uk
Ren Sowald
Office: +31 (0) 316 844220 Fax: +44 (0) 121 511 0402 Mobile: +44 (0) 7825 944 048 Email: rene.sowald@ipu.co.uk
Wenkui Liao
Office: +44 (0) 121 511 0459 Fax: +44 (0) 121 511 0402 Mobile: +44 (0) 7826 872610 Email: wenkui.liao@ipu.co.uk
Bally Bahia
Office: +44 (0) 121 511 0400 Fax: +44 (0) 121 511 0402 Email: bally.bahia@ipu.co.uk
Kat Dekeuster
Office: +44 (0) 121 511 0400 Fax: +44 (0) 121 511 0402 Email: kat.dekeuster@ipu.co.uk
Starting Administrator
The system configuration comprises two separate hydraulic start packs each with a capacity for three start attempts. In manufacture all hydraulic components were fitted with low temperature seals, accumulators were fitted with low temperature bladders and a special Arctic grade oil selected to cover the wide variations of temperature to be experienced. Component such as gauges, pressure transmitters and valves were carefully selected with this temperature in mind. IPU Starting prepared all documentation for the GOST technical passport necessary for each system.
This hydraulic solution was designed as a secondary start unit for a CAT 3512 engine installed at the Russian mainland export terminal. During the winter, ambient temperature can be as low as -40C. As a consequence, equipment operating in this hostile environment needs to be capable of withstanding and performing at this extreme temperature.
For more information contact a member of our Starting Sales Team on +44 (0) 121 511 0400
10
This starting system, for a major international GTL development in the Middle East, is one of the largest air packages IPU Starting has designed and assembled. The complete system comprised two stainless steel 1900 litre, ASME VIII Div. 1 and U stamped air receivers, storing air at 30 bar to start a CAT 3616 diesel driven emergency generator. The design featured a duty electric compressor and diesel driven standby compressor. All pipe work, valves and fittings in stainless steel and all instrumentation and electric components to Zone 2.
For more information contact a member of our Starting Sales Team on +44 (0) 121 511 0400
11
IPU Group is a single source partner providing high-quality engineering solutions for diesel and gas engines, which include starting solutions, control & monitoring, silencing, heating and filtration for almost any marine, industrial and offshore engine application around the world.
As a company we are passionate about raising standards and delivering exceptional service for the benefit of customers.
West Midlands, B69 2AS England T: +44 (0) 121 511 0400 F: +44 (0) 121 511 0401 E: ipu@ipu.co.uk www.ipu.co.uk
2008/372