Beruflich Dokumente
Kultur Dokumente
Peter Ingels
Prodesk
Chris Berends
Autodesk
Autodesk Presentation Title 1
2005 Autodesk
Peter Ingels
Prodesk
Chris Berends
Autodesk
Autodesk Presentation Title 2
Training Schedule
09.00 u. 09.10 u. Case Presentation 09.10 u. 09.30 u. Case study 09.30 u. 10.30 u. Theory
Surfaces
Volumes Grading
13.00 u. 13.30 u. Lunch 13.30 u. 14.30 u. Case Practice 14.30 u. 15.00 u. Q&A (case) 15.00 u. 16.00 u. Case Presentations
2005 Autodesk
Surfaces
Surface Types
TIN Surface
Triangulated Irregular Network Arbitrary set of points Creation slower than GRID, files bigger
GRID Surface
composite surface created from a combination of points in a top (comparison) and (base) surface
differential surface based on user-specified top and bottom surfaces with points on a user-specified grid.
2005 Autodesk
TIN Surfaces
TIN (Triangular Irregular Network) surfaces Formed by triangulating an arbitrary set of points Used for:
2005 Autodesk
GRID Surfaces
Grid surfaces Generated by points that lie on a regular grid Used for:
2005 Autodesk
Volume Surfaces
Differences between two existing terrain surfaces
Calculating Surface Volumes
Composite Volumes
TIN Volume Surfaces Display cut and fill contours. Known as differential surface. Difference of base and comparison surfaces. Grid Volume Surface Provides more accurate model.
Accurate volume between two surfaces. Volume of an area defined by a polyline or polygon. Compared with z =0
Bounded Volumes
2005 Autodesk
Surface Creation
Import/export
TIN/DEM (Digital Elevation Model) files LandXML (settings:edit default file import settings, link naar XML file blijft bestaan)
Land Desktop
2005 Autodesk
Surface Creation
Surface Definition
Boundaries Breaklines (Next slide) Countours DEM Files (Digital Elevation Model) Drawing objects Point files (PENZ file needed) Point Groups
10
2005 Autodesk
Surface Breaklines
Breaklines can be defined from objects in the drawing or imported from a file.
Standard
3D Lines and 3D Polylines maintain the integrity of the original surface 3D Lines, 3D Polylines or points offset side for the entire breakline elevation difference for each vertex, or entire breakline
Proximity Wall
11
2005 Autodesk
12
2005 Autodesk
Surface Triangulation
13
2005 Autodesk
Surface Edits
14
2005 Autodesk
Surface Smooting
Only for TIN surfaces !!!!!
Interpolation, no extrapolation Elevation new point is based on the elevation of the surrounding points (in voronoi zone)
Kriging
Interpolation and extrapolation Complex (distance and variance) Less predictable result
Grid based (X, Y value, region, orientation) Centroids (region) Random points (number of points)
Region = Parcel, Polygon, Surface, Rectangle
15
2005 Autodesk
Surface analyses
Types
Slopes
Renders the surface triangles according to their slope angle
User-defined contours
Add legend
2005 Autodesk
LandXML
Extensible Markup Language (XML) is used to create electronic documents that are easy to transmit and share across the World Wide Web. Data stored in LandXML format can be used by any program that uses LandXML standards, not just the software that created it. The LandXML import and export functionality is based on the LandXML 1.0 schema and respects OGC standards. For detailed information go to: www.landxml.org and www.opengis.org
18
2005 Autodesk
LandXML
LandXML is designed for civil engineering design and survey measurement data and serves as common data format to transfer data between civil applications, such as Trimble's Geomatics Office. Contains both, geometric and attribute information about Civil Engineering objects, such as alignments and COGO Points.
19
2005 Autodesk
Exchange data into other software applications. Transfer/archive data. Convert units. Translate/rotate coordinates
20
2005 Autodesk
21
2005 Autodesk
22
2005 Autodesk
Grading
23
Grading
24
2005 Autodesk
Grading
25
2005 Autodesk
Grading
26
2005 Autodesk
Grading Parts
Parts of a Grading A grading object normally consists of the base line, the target line, the projection lines, and the face. The face is the area bounded by the lines that define the grading:
The base line is any open or closed figure to which you can apply grading and from which you can project the grading outward.. The target for the grading can be a surface, a distance, an elevation, or a relative elevation.
Autodesk Presentation Title 27
2005 Autodesk
Grading Regions
You define grading regions where a grading object requires different criteria along different parts of the base line.
28
2005 Autodesk
grading settings
On the Toolspace Settings tab, right-click Grading Edit Feature Settings. In the Edit Feature Settings dialog box, expand the General collection. In the Save command changes to settings property, set the value to Yes. This setting saves command settings for reuse.
29
2005 Autodesk
grading settings
Expand the collections for Grading Grade Unit and Grading Slope Unit. Note the options for unit format and precision. The integer value for precision specifies the number of digits to the right of the decimal place.
30
2005 Autodesk
Rounding
Format
31
2005 Autodesk
32
2005 Autodesk
33
2005 Autodesk
34
2005 Autodesk
Grading Toolbar
35
2005 Autodesk
Distance: Creates the grading with projection lines that extend a fixed distance from the base line. Slope: Creates the grading by projection to a specific (absolute) elevation using a specific slope value. Enter a positive or negative value. Elevation: Creates the grading by projection to a specific (absolute) elevation value. Relative Elevation: Creates the grading by projection to a specific elevation value that is measured relative to the elevation of the base line.
Autodesk Presentation Title 37
2005 Autodesk
CreateFeatureLines
Automatically Convert AutoCAD Objects Specifies whether you are prompted to convert selected objects to feature lines. By default you are prompted, change this value to True to convert objects without prompting. Erase Selected Objects Specifies whether creation commands erase selected objects when they are converted to feature lines. By default objects are erased. Change this value to False to have objects remain in the drawing. Use Selected Object Layers Specifies the layer where the converted feature lines are placed. By default, feature lines are placed on the layer specified in the Drawing Settings. Change this value to True to place feature lines on the same layer as the selected objects (Note that doing so may make it hard to select the feature lines if you also set Erase Selected Objects to False).
Autodesk Presentation Title 38
2005 Autodesk
40
2005 Autodesk