Beruflich Dokumente
Kultur Dokumente
6ES7307-1KA02-0AA0
SIMATIC S7-300 STABILIZED POWER SUPPLY PS307 INPUT: 120/230 V AC OUTPUT: DC 24 V DC/10 A
Technical specifications Product Power supply, type Input Input Supply voltage / 1 / at AC / nominal value Supply voltage / 2 / at AC / nominal value Voltage range Note Input voltage / 1 / at AC Input voltage / 2 / at AC Wide-range input Overvoltage resistance Mains buffering at Iout rated, min. Mains buffering Rated line frequency Rated line range Input current / at nominal level of the input voltage 120 V Input current / at nominal level of the input voltage 230 V Switch-on current limiting (+25 C), max. Duration of current limiting / at 25 C / maximum Automatic range selection 85 132 V 170 264 V No 2.3 Vin rated, 1.3 ms 20 ms at Vin = 93/187 V 50 / 60 Hz 47 ... 63 Hz 4.2 A 1.9 A 55 A 3 ms 1-phase AC 120 V 230 V PS 307 24 V/10 A
6ES7307-1KA02-0AA0 Page 1/ 4
05/08/2013
It, max. Built-in incoming fuse Protection in the mains power input (IEC 898) Output Output Rated voltage Vout DC Total tolerance, static Static mains compensation, approx. Static load balancing, approx. Residual ripple peak-peak, max. Residual ripple peak-peak, typ. Spikes peak-peak, max. (bandwidth: 20 MHz) Spikes peak-peak, typ. (bandwidth: 20 MHz) Product feature / output voltage adjustable Output voltage setting Status display On/off behavior Startup delay, max. Voltage rise, typ. Rated current value Iout rated Current range delivered active power / typ. short-term overload current / at short-circuit during run-up / typical Duration of overloading ability for excess current / on short-circuiting during the start-up short-term overload current / at short-circuit during operation / typical Duration of overloading ability for excess current / on short-circuiting during the operational phase Parallel switching for enhanced performance Efficiency Efficiency at Vout rated, Iout rated, approx. Power loss at Vout rated, Iout rated, approx. Closed-loop control Dynamic mains compensation (Vin rated 15 %), max. Dynamic load smoothing (Iout: 50/100/50 %), Uout typ. Setting time / maximum Protection and monitoring Output overvoltage protection Current limitation Characteristic feature of the output / short-circuit protected
3.3 As T 6.3 A/250 V (not accessible) Recommended miniature circuit breaker: from 10 A, characteristic C
Controlled, isolated DC voltage 24 V 3% 0.1 % 0.5 % 50 mV 15 mV 150 mV 60 mV No Green LED for 24 V OK No overshoot of Vout (soft start) 2s 10 ms 10 A 0 10 A 240 W 38 A 80 ms
38 A 80 ms
Yes
90 % 27 W
0.1 % 2% 0.1 ms
6ES7307-1KA02-0AA0 Page 2/ 4
05/08/2013
Short-circuit protection Enduring short circuit current / Effective level / maximum Overload/short-circuit indicator Safety Primary/secondary isolation Potential separation
Yes Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 Class I 3.5 mA 0.6 mA Yes Yes cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289, UL 1604 Class I Div. 2 Group A, B, C, D, File E330455 ATEX (EX) II 3G Ex nA II T4; UL 1604 Class I, Div. 2, Group ABCD Class I, Div. 2, Group ABCD, T4 No In S7-300 system IP20
Protection class stray current / maximum stray current / typical CE mark UL/CSA approval UL/cUL (CSA) approval
Explosion protection FM approval CB approval Marine approval Degree of protection (EN 60529) EMC Emitted interference Supply harmonics limitation Noise immunity Operating data Ambient temperature / in operation Note Ambient temparature / on transport Ambient temparature / in storage Humidity class according to EN 60721 Mechanics Connection technology Connections / Supply input
0 60 C with natural convection -40 +85 C -40 +85 C Climate class 3K3, no condensation
screw-type terminals L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm single-core/finely stranded L+, M: 4 screw terminals each for 0.5 ... 2.5 mm 80 mm 125 mm 120 mm 80 mm 205 mm
Connections / Output Connections / Auxiliary Width / of the housing Height / of the housing Depth / of the housing Installation width Mounting height
6ES7307-1KA02-0AA0 Page 3/ 4
05/08/2013
Weight, approx. Product feature / of the housing / housing for side-by-side mounting Type of mounting / wall mounting Type of fixing / cap rail mounting Type of mounting / S7-300 rail mounting Installation Mechanical accessories Other information
0.8 kg Yes No No Yes Can be mounted onto S7 rail Mounting adapter for standard mounting rail (6EP1971-1BA00) Specifications at rated input voltage and ambient temperature +25 C (unless otherwise specified) Mar 22, 2013
letzte nderung:
6ES7307-1KA02-0AA0 Page 4/ 4
05/08/2013