Beruflich Dokumente
Kultur Dokumente
Automatic Card authentication Double authentication feature (Pin & Card Key) Force Lock features
www.EzonWorld.com
ezonsales@gmail.com
Press the battery compartment cover lightly then slide the cover following the arrow direction
Bee~ree ~reep
2 random numbers will be lighted on the screen. Press the 2 numbers When the number pad completely lights-up enter pin number followed by [*] button button
Bee~ree ~reep
When the number pad completely lights-up enter pin number followed by [*] button
-Enter pin number immediately when the number pad lights up, when the number pad light turns off touch the number pad again -When wrong pin number is entered, press the [House] icon and enter correct pin -5 consecutive failed pin entry will enable an alarm and the lock will shut down for 3 minutes
Automatic Mode
Place card/key tag on the sensor and the door will open within 1 second
In manual mode, touch the number pad and place card on sensor
Closing
Bee~ree~ree
While the door is closed, Press the [Open] button on the main body and the door will open
In manual lock mode, while the door is closed, press the [Open] button and the door will close
Enter new pin number to be registered 4~12 digits, then press [*] button
For safety register at least 6 digits pin number (0~9) numbers New pin number registration will delete previously registered pin number on the system Register pin number while door is open
Bee~ree~reep
Beep~ Beep~
Press [7] button to enable Press [9] to disable followed by [*] button
Beep~
Press [4] button to enable Press [6] to disable followed by [*] button
When the number pad lights up, enter pin number followed by [*] button
Located in the main body is the [A/M] switch. Place the switch at [A] location for automatic and [M] location for Manual Automatic lock Mode The door will lock within 2 seconds after closing the door Manual Mode - Press the [Open] button inside or touch the number pad outside to lock the door
Sound Setting
Melody guide during pin entry,door closing or opening can be adjusted to desired volume, The melody guide is enabled in default.
Set Volume
Bee~ree~ reep
Press [0] button to mute Press [1]~[3] button to adjust sound followed by [*] button
Bee~ree~ reep
Press [5] button for automatic Press [8] button for manual Followed by [*] button
In automatic Mode place the card on the sensor and the door will open, In manual mode place the number pad and put the card in the sensor to open the door
Automatic Mode is enabled in default, but manual mode consumers lesser battery
Enable
Bee~ree ~ reep
Disable
Bee~ reep
Application
Touching the screen,Entering pin number or placing card on the sensor will not open the door. Turning the manual lever switch to open direction will open the door from the inside
Bee~reep
Enable
Disable
Replace Battery Notification When the battery is about to be discharge, upon pin or card entry, the replace battery alarm will be heard and the battery lamp will be lighted
Replace Battery
Please replace the battery within a week after hearing the alarm, the lock will shutdown if disregarded.
Battery life depends on brand,usage and environment. Normal battery last for 10 months (based on 10 operations per day) Please check for damage during battery replacement
Security Alarms
Anti-Hacking Alarm This security feature will activate a series of alarm due to multiple failed pin number or card authentication. And the lock will shut down for 3 minutes.