Beruflich Dokumente
Kultur Dokumente
Course Description
The ExtremeXOS: Operation and Configuration (EXOC) training course provides Extreme Networks customers with instructor-led lectures and extensive hands-on laboratory exercises. This course presents the concepts and skills required to deploy the Extreme Networks products as Layer 2 switches and as wire-speed Layer 3 routers in a variety of network situations. This course is based on ExtremeXOS 12.1. The course focuses on device management, Layer 2 configuration, Layer 3 configuration for IP networks using static routes, RIP, OSPF, universal port, and basic network troubleshooting. The course also presents an overview of the ExtremeXOS software feature set. Describe and configure different VLAN types Configure a network using the Spanning Tree Protocol Configure a network using Ethernet Automatic Protection Switching (EAPS) Configure Layer 3 routing Configure and deploy a dynamically routed network using RIP and OSPF Configure Network Login to use MAC-based authentication Describe and configure Universal Port Configure policy-based Quality of Service (QoS) Perform diagnostics on the switch Perform basic troubleshooting steps
Intended Audience
This course is designed for individuals responsible for the configuration, management, maintenance, and support of the Extreme Networks family of LAN switches.
Course Outline
Course Introduction Extreme Networks Product Overview Initial Switch Configuration Switch Management Layer 1 Configuration ExtremeXOS Stacking Layer 2 Forwarding VLAN Configuration Spanning Tree Ethernet Automatic Protection Switching (EAPS) IP Routing Configuring RIP Configuring OSPF Network Login Operation Universal Port Policy-based Quality of Service Switch Diagnostics Network Troubleshooting
Course Prerequisites
A student must have a working familiarity of LAN concepts, including Ethernet and TCP/IP networking. Experience configuring network devices is recommended.
Course Objectives
At the end of this course, the students will be able to: Describe Extreme Networks products Use the ExtremeXOS command line interface structure Configure the Extreme Networks switch for network management Configure Layer 1 and Layer 2 networking features Describe the process to setup and verify ExtremeXOS stacking operation
2009 Extreme Networks, Inc. All rights reserved. Extreme Networks, the Extreme Networks logo and ExtremeXOS are either registered trademarks or trademarks of Extreme Networks, Inc. in the United States and/or other countries. Specifications are subject to change without notice.
1514_02 06/09