Beruflich Dokumente
Kultur Dokumente
Legal representative:
Jutta Kuhne, CEO Michael Kuhne
Commercial register:
District court Hof/S - HRB 3350 Ust.-Id No: DE 813 343 044 WEEE-Reg.-No. DE 34 18 66 65
Internet: www.kuhne-electronic.de
http://www.kuhne-electronic.de
2010/2011
Our Company
Kuhne electronic provides direct worldwide customer service, without distributors. This is why we can guarantee best service and inexpensive realisation of customer defined solutions. You did not find a suitable power amplifier for a certain frequency range among our products? You need a special converter? In most cases, one of our standard products is similar to what you need. Usually, they can be modified and delivered within a short time and for moderate costs. Do Our range of products reaches from high linearity power amplifiers and low noise preamplifiers to down converters, up converters, oscillators and modules for special applications. Our customers are companies in more than 70 countries all over the world. They are active in the areas Telecommunications, Aerospace, Media and Broadcast. Furthermore, we supply universities and research institutes with laboratory measurement equipment and special devices for research and development. Other customers are the government, public authorities and security services. not hesitate to contact us. We look forward to take your technical specification and realise customer defined RF and microwave modules!
We develop, produce and sell RF and microwave modules and devices in the frequency range from 100 MHz to 50 GHz.
03
http://www.kuhne-electronic.de
2010/2011
Contents
Low Noise Amplifiers
Broadband Low Noise Amplifiers Super Low Noise Amplifiers Low Noise Amplifiers for Avionics, Radio Astronomy and Satellite Reception Power Splitter for GPS
06
07 12 23 25
Power Amplifiers
Broadband Power Amplifiers VHF Power Amplifiers UHF Power Amplifiers L-Band Power Amplifiers for 1000 ... 2000 MHz S-Band Power Amplifiers for 2000 ... 4000 MHz C-Band Power Amplifiers for 4000 ... 7000 MHz X-Band Power Amplifiers for 9000 ... 11000 MHz Power Amplifiers for 8 ... 15 GHz Power Amplifiers for 24 GHz Power Combiner (Splitter) for 1296 MHz Power Combiner (Splitter) for 2300 ... 2330 MHz
28
28 29 30 32 43 65 72 76 78 36 56
Circulators Down Converters (Low Noise Converters) Up Converters Oscillators and Signal Sources
PLL Stabilized Oscillators Signal Generators Beacon Transmitters Fixed Frequency Oscillators
80 81 89 93
93 94 96 97
02 118
04
http://www.kuhne-electronic.de
2010/2011
MICROWAVE COMPONENTS
Please visit our website for more detailed information about our prodcuts!
05
http://www.kuhne-electronic.de
2010/2011
Input Signal
Output Signal
If the LNA is installed directly at the antenna, the total noise figure of the system is mainly determined by the noise figure of the LNA itself. Even if a long and lossy cable is installed between LNA and receiver, the noise figure remains at a lower level. The two lower curves in the diagram show a system, where the attenuation is inserted behind the LNA. System setup with good noise performance:
Input Signal
Output Signal
06
http://www.kuhne-electronic.de
2010/2011
APPLICATIONS Analog and digital transmission systems Suitable for large signal environments Amplifier for low power applications Driver amplifier
BLOCK DIAGRAM
Block diagram for KU LNA BB 1018 A, KU LNA BB 2240 A and KU LNA BB 3050 A
Type
Frequency range Noise figure @ 18 C Gain Input power Output power P1dB Saturation output power Output IP3 Input return loss (S11) Output return loss (S22) Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNA BB 1018 A
100 ... 180 MHz typ. 1.0 dB, max. 1.3 dB min. 20 dB (max. +/- 2 dB) max. +20 dBm (100 mW) typ. +28 dBm @ 140 MHz min. +30 dBm @ 140 MHz typ. +44 dBm @ 140 MHz min. 10 dB typ. 15 dB +12 ... 15 V DC typ. 400 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 78 x 41 x 22 typ. 100 g
KU LNA BB 2240 A
225 ... 400 MHz typ. 1.0 dB, max. 1.2 dB 20 dB (+/- 2.5 dB) max. +20 dBm (100 mW) typ. +28 dBm @ 300 MHz min. +30 dBm @ 300 MHz typ. +40 dBm @ 300 MHz typ. 15 dB (min. 11 dB) typ. 15 dB (min. 11 dB) +12 ... 15 V DC typ. 400 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 78 x 41 x 22 typ. 100 g
KU LNA BB 3050 A
(300) 350 ... 500 MHz typ. 1.0 dB, max. 1.3 dB 20 dB (max. +/- 2.5 dB) max. +20 dBm (100 mW) typ. +28 dBm @ 400 MHz min. +30 dBm @ 400 MHz typ. +40 dBm @ 400 MHz typ. 15 dB, min. 13 dB typ. 15 dB, min. 13 dB +12 ... 15 V DC typ. 400 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 78 x 41 x 22 typ. 100 g
07
http://www.kuhne-electronic.de
2010/2011
APPLICATIONS Measurement and laboratory equipment Suitable for large signal environments CATV amplifier OPTIONS Remote power supply via output connector
Type
Type
Frequency range Input power Noise figure @ 18 C Gain Output power P1dB Output IP3 @ 20 MHz Output IP3 @ 100 ... 1500 MHz Input return loss (S11) Supply voltage Current consumption Input connector, impedance
Frequency range Noise figure @ 18 C Gain Input power Output power P1dB Output IP3 Input return loss (S11) Supply voltage Current consumption Input connector, impedance
KU LNA BB 0180 A-SMA: SMA-female, 50 ohms KU LNA BB 0180 B-N: N-female, 50 ohms KU LNA BB 0180 C-N: N-male, 50 ohms
KU LNA BB 0515 A-SMA: SMA-female, 50 ohms KU LNA BB 0515 B-N: N-female, 50 ohms KU LNA BB 0515 C-N: N-male, 50 ohms Case Dimensions (mm) Weight
milled aluminium 50 x 30 x 17 KU LNA BB 0180 A-SMA: typ. 45 g KU LNA BB 0180 B-N: typ. 85 g KU LNA BB 0180 C-N: typ. 100 g
milled aluminium case 50 x 30 x 17 KU LNA BB 0515 A-SMA: typ. 50 g KU LNA BB 0515 B-N typ. 85 g KU LNA BB 0515 C-N typ. 100 g
08
http://www.kuhne-electronic.de
2010/2011
Type
Frequency range Noise figure @ 18 C Gain Output IP3 Input return loss (S11) Output return loss (S22) Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNA BB 2533 A
2500 ... 3300 MHz typ. 1.2 dB, max. 1.3 dB typ. 33 dB, min. 31 dB typ. +30 dBm typ. 12 dB typ. 10 dB +12 ... 15 V DC typ. 120 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 78 x 41 x 22 typ. 110 g
APPLICATIONS Digital broadcast systems Analog and digital transmission systems Measurement and laboratory equipment BLOCK DIAGRAM
APPLICATIONS Measurement and laboratory equipment Analog and digital transmission systems
Type
Frequency range Noise figure @ 18 C
KU LNA BB 3000 A
10 ... 3000 MHz min. 2 dB (10 ... 25 MHz) typ. 1.5 dB, max. 2.1 dB (25 ... 2800 MHz) typ. 2.0 dB, max. 2.5 dB (2800 ... 3000 MHz)
Gain Input power RF input protection Output IP3 Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impendance Case Dimensions (mm) Weight
25 ... 30 dB max. 1 mW PIN diodes min. +26 dBm, typ. +30 dBm +55 C +12 ... 15 V DC typ. 150 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 50 x 30 x 17 typ. 45 g
09
http://www.kuhne-electronic.de
2010/2011
APPLICATIONS Measurement and laboratory equipment Analog and digital transmission systems
APPLICATIONS Measurement and laboratory equipment Analog and digital transmission systems
Type
Frequency range Noise figure @ 18 C Gain Input power RF input protection Output IP3 Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impendance Case Dimensions (mm) Weight
KU LNA BB 0112 A
100 ... 12000 MHz typ. 6.0 dB typ. 20 dB
Type
Frequency range Noise figure @ 18 C
KU LNA BB 202 A
100 ... 20000 MHz 100 ... 2000 MHz, typ. 4,5 dB (max. 5,5 dB) 2000 ... 20000 MHz, typ. 3,5 dB (max. 5,5 dB) 100 ... 2000 MHz, typ. 28 dB (+/- 3,0 dB) 2000 ... 20000 MHz, typ. 25 dB (+/- 3,0 dB) 100 ... 5000 MHz, min. 27 dBm typ. 10 dB typ. 10 dB +55 C +12 ... 14 V DC typ. 190 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 78 x 41 x 22 typ. 100 g
Gain
+55 C +12 ... 15 V DC typ. 100 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 50 x 30 x17 typ. 40 g Output IP3 Input return loss (S11) Output return loss (S22) Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
10
http://www.kuhne-electronic.de
2010/2011
APPLICATIONS Analog and digital transmission systems Measurement and laboratory equipment
APPLICATIONS Digital broadcast systems (DVB-T, DVB-S) Multichannel Multipoint Distribution Service (MMDS) Analog and digital transmission systems Measurement and laboratory equipment
Type
Frequency range Noise figure @ 18 C Gain Output power P1dB Saturation power Output IP3 Input return loss (S11) Output return loss (S22) Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNA BB1020 A
1000 ... 2000 MHz typ. 0.8 dB, max. 1.0 dB min. 28 dB typ. 23 dBm typ. 37 dBm @ 1.5 GHz min. 10 dB typ. 10 dB +12 ... 15 V DC typ. 350 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 78 x 41 x 21 typ. 100 g
KU LNA BB 1522 A
1500 ... 2200 MHz typ. 0.8 dB, max. 1.0 dB min. 27 dB typ. +19 dBm @ 1.8 GHz typ. +20 dBm @ 1.8 GHz typ. +36 dBm @ 1.8 GHz min. 13 dB typ. 10 dB +12 ... 15 V DC typ. 250 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 78 x 41 x 22 typ. 100 g
KU LNA BB 2227 A
2200 ... 2700 MHz typ. 0.9 dB, max. 1.2 dB min. 25 dB typ. +23 dBm typ. +33 dBm min. 13 dB typ. 10 dB +12 ... 15 V DC typ. 250 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 78 x 41 x 22 typ. 110 g
11
http://www.kuhne-electronic.de
2010/2011
Selective Super Low Noise PHEMT Preamplifier for UHF Frequency Range
FEATURES Type
Frequency range Noise figure @ 18 C Gain Output IP3 Input return loss (S11) Output return loss (S22) Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
Low noise figure and high gain Helical filter for good selectivity High IP3 Milled aluminium case Unconditionally stable - no parasitic oscillations in case of poor antenna match Reverse polarity protection OPTIONS Other frequencies on request Option 7/16: Connector 7/16-female, 50 ohms
12
http://www.kuhne-electronic.de
2010/2011
APPLICATIONS Analog and digital transmission systems Measurement and laboratory equipment Radar receiving systems BLOCK DIAGRAM
Block diagram for KU LNA 133 BH, KU LNA 163 BH and KU LNA 183 BH
Type
Frequency range Noise figure @ 18 C Gain Input power Output IP3 Input return loss (S11) Output return loss (S22) Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNA 133 BH
1200 ... 1400 MHz typ. 0.6 dB, max. 0.7 dB min. 32 dB max. 1 mW typ. +29 dBm @ 1300 MHz min. 15 dB min. 10 dB +55 C +12 V DC typ. 100 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 73 x 30 x 20 typ. 80 g
KU LNA 163 BH
1500 ... 1700 MHz typ. 0.6 dB, max. 0.7 dB min. 31 dB max. 1 mW typ. +30 dBm @ 1600 MHz min. 18 dB min. 10 dB +55 C +12 V DC typ. 100 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 73 x 30 x 20 typ. 80 g
KU LNA 183 BH
1600 ... 1900 MHz typ. 0.6 dB, max. 0.7 dB min. 29 dB max. 1 mW typ. +33 dBm @ 1800 MHz min. 18 dB min. 11 dB +55 C +12 V DC typ. 100 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 73 x 30 x 20 typ. 80 g
13
http://www.kuhne-electronic.de
2010/2011
Extremely low noise figure High IP3 for good large signal performance Unconditionally stable - no parasitic oscillations in case of poor antenna match Reverse polarity protection Solder pin for direct power supply Male connector at the input for direct connection to antenna or coaxial relay Small mechanical dimensions OPTIONS Remote power supply via output connector Other connectors are available on request
KU LNA 222 AH
2200 ... 2400 MHz typ. 0.5 dB @ 2250 MHz, max. 0.6 dB @ 2250 MHz typ. 30 dB typ. 27 dBm +9 ... 15 V DC typ. 80 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 73 x 30 x 20 typ. 90 g
APPLICATIONS Analog and digital transmission systems Measurement and laboratory equipment OPTIONS Remote power supply via output connector Input and output with N connectors ACCESSORIES Bias-T (for remote power supply)
14
http://www.kuhne-electronic.de
2010/2011
Type
Frequency range Noise figure @ 18 C Gain Input power Supply voltage Current consumption Input connector, impedance
Type
Frequency range Noise figure @ 18 C Gain Input power Supply voltage Current consumption Input connector
15
http://www.kuhne-electronic.de
2010/2011
Type
Frequency range Noise figure @ 18 C Gain Saturation power Supply voltage Current consumption Input connector, impedance Ouput connector, impedance Case Dimensions (mm) Weight
16
http://www.kuhne-electronic.de
2010/2011
With this new developed amplifier MKU LNA 473 A based on the 0.15 pHEMT technology the combination of very low noise figure and a high output power in one product has been achieved. This amplifier is suitable for receiving and transmitting as well. By using a waveguide transfer switch or a rotate mechanism this amplifier can be implemented in a transverter which will increase the transmit and receive performance drastically. To reduce losses to a minimum the board is coupled directly to the waveguide input. The small mechnical dimensions allow the construction of very tight transmit and receive systems. FEATURES Low noise figure High output power Unconditionally stable - no parasitic oscillations in case of poor antenna match Simple supply voltage handling Small mechanical dimensions Suitable as preamplifier and as power amplifier
Type
Frequency range Noise figure @ 18 C Gain Saturation power Maximum case temperature Supply voltage Current consumption Input connector, impedance Ouput connector, impedance Case Dimensions (mm) Weight
17
http://www.kuhne-electronic.de
2010/2011
Type
Frequency range Noise figure @ 18 C Gain Input power Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNA 3436 A
3400 ... 3600 MHz typ. 0.8 dB, max. 0.9 dB typ. 29 dB max. 1 mW +9 ... 15 V DC typ. 80 mA SMA-male, 50 ohms SMA-female, 50 ohms milled aluminium 73 x 30 x 20 typ. 75 g
KU LNA 3436 B
3400 ... 3600 MHz typ. 0.8 dB, max. 0.9 dB typ. 29 dB max. 1 mW +9 ... 15 V DC typ. 80 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 73 x 30 x 20 typ. 75 g
18
http://www.kuhne-electronic.de
2010/2011
APPLICATIONS Satellite reception Analog and digital operation modes (SSB, CW, WSJT) OPTIONS Remote power supply via output connector Other connectors are available on request
KU LNA 6570 A
6500 ... 7000 MHz typ. 0.8 dB min. 23 dB max. 1 mW +8 ... 12 V DC typ. 90 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 50 x 30 x 17 typ. 50 g
APPLICATIONS Analog and digital transmission systems Measurement and laboratory equipment
19
http://www.kuhne-electronic.de
2010/2011
KU LNA 4450 A
4400 ... 5000 MHz typ. 0.8 dB, max. 0.9 dB min. 24 dB typ. 13 dBm typ. +23 dBm @ 4750 MHz min. 6 dB min. 9 dB +8 ... 14 V DC typ. 110 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 50 x 30 x 17 typ. 40 g
20
http://www.kuhne-electronic.de
2010/2011
APPLICATIONS Measurement and laboratory equipment OPTIONS Other frequencies on request KU LNA 682 A-BIAS The low noise amplifier KU LNA 682 A-BIAS for 6.8 GHz provides an extra bias-T at the input as a special feature. This bias-T allows the power supply of components at the input connector, such as photo diodes or other active devices. The low noise amplifier itself can not be remote supplied via input or output connector. There is a feed-through capacitor for the supply voltage.
Type
Frequency range Noise figure @ 18 C Gain Bias supply Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNA 682 A
6790 ... 6810 MHz typ. 1 dB typ. 26 dB +9 15 V DC typ. 30 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 73 x 30 x 20 typ. 75 g
21
http://www.kuhne-electronic.de
2010/2011
Type
Frequency range Noise figure @ 18 C Gain Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNA 922 A
9190 ... 9210 MHz typ. 0.8 dB typ. 25 dB +9 ... 15 V DC typ. 30 mA SMA-male, 50 ohms SMA-female, 50 ohms milled aluminium 50 x 30 x 17 typ. 50 g
KU LNA 922 B
9190 ... 9210 MHz typ. 0.8 dB typ. 25 dB +9 ... 15 V DC typ. 30 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 50 x 30 x 17 typ. 50 g
22
http://www.kuhne-electronic.de
2010/2011
Type
Frequency range Noise figure @ 18 C Gain Input power Supply voltage Current consumption Input connector, impedance Output connector, impedance Case
KU LNA 1090 A
1070 ... 1110 MHz typ. 0.5 dB, max. 0.6 dB min. 30 dB 1 mW +8 ... 15 V DC 130 mA N-female, 50 ohms BNC-female, 50 ohms German silver
KU LNA 1090 A TM
1070 ... 1110 MHz typ. 0.5 dB, max. 0.6 dB min. 30 dB 1 mW +8 ... 15 V DC 130 mA N-female, 50 ohms N-female, 50 ohms German silver, installed into a water resistant case incl. V2A mounting clamp for antenna masts with 25...60 mm diameter 110 x 60 x 85 typ. 330 g
74 x 37 x 30 typ. 90 g
23
http://www.kuhne-electronic.de
2010/2011
Type
Frequency range Noise figure @ 18 C Gain Input power Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNA 172 A
1685 ... 1705 MHz typ. 0.7 dB min. 35 dB max. 1 mW +9 ... 18 V DC 30 mA N-male, 50 ohms N-female, 50 ohms German silver 74 x 38 x 30 typ. 130 g
KU LNA 152 AH
1520 ... 1560 MHz max. 0.4 dB typ. 33 dB max. 1 mW +9 ... 15 V DC 65 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 74 x 30 x 20 typ. 140 g
24
http://www.kuhne-electronic.de
2010/2011
Type
Frequency range Noise figure @ 18 C Gain Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
Super Low Noise Amplifier for GPS Reception for 1565...1585 MHz
FEATURES Very low noise figure High gain Helical filter for good selectivity Static protection (ESD) at preamplifier input Unconditionally stable - no parasitic oscillations in case of poor antenna match Reverse polarity protection Remote power supply via output connector APPLICATIONS GPS reception Type
Frequency range Noise figure @ 18 C Gain Output power Output IP3 Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNA 1575-50
1565 ... 1585 MHz max. 0.5 dB typ. 55 dB min. 10 dBm (10 mW) min. 20 dBm +9 ... 18 V DC typ. 100 mA N-female, 50 ohms N-female, 50 ohms milled aluminium 102 x 45 x 29 typ. 220 g
Power Splitters
Power Splitter for GPS for 1575 MHz
FEATURES Passive power splitter with DC-coupled path for power supply of an active antenna APPLICATIONS Two GPS receivers can be connected to one common antenna. The receiver in the DC-coupled path can be used to supply an active antenna. Type
Frequency range Insertion loss Isolation Impedance DC path Input connector, impedance Output connector A , impedance Output connector B, impedance Case Dimensions (mm) Weight
KU DIV 1575
1565 ... 1585 MHz typ. 3 dB typ. 25 dB 50 ohms +0 ... 24 V DC / max. 0.5 A N-female, 50 ohms N-female, 50 ohms N-female, 50 ohms tinplate 37 x 37 x 30 typ. 95 g
25
http://www.kuhne-electronic.de
2010/2011
Type
Frequency range Noise figure @ 18 C Gain Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNA 142 AH
1350 ... 1450 MHz 0.4 dB +/- 0.05 typ. 33 dB +9 ... 15 V DC typ. 80 mA N-male, 50 ohms N-female, 50 ohms milled aluminium 73 x 30 x 22 typ. 140 g
Type
Frequency range Noise figure @ 18 C Gain Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNA 8000 A
8000 ... 8450 MHz typ. 0.7 dB min. 24 dB +12 ... 15 V DC typ. 30 mA Waveguide R100 / WG 16 / WR 90 SMA-female, 50 ohms milled aluminium 73 x 40 x 20 typ. 110 g
26
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Kuhne electronic has a long experience in the development and production of solid state power amplifiers. This has lead to a huge choice of power amplifiers which cover the frequency range from 100 MHz to 50 GHz and reach an output power up to 500 watts. Standard products are available for a variety of different applications. Typical applications are analog and digital broadcast systems, telecommunication systems or radio links. Of course, the power amplifiers are also suitable for special applications like laboratory and measurement equipment, which is often needed at universities and research institutes. In addition to that, Kuhne electronic offers customer defined power amplifiers. If you do not find a suitable power amplifier within our standard products, please do not hesitate to contact us and send your desired technical specification. Cooling of Power Amplifiers All power amplifiers need sufficient cooling to prevent overheat damages or destruction of semiconductor devices. So, what cooling method is the best one? There is no simple answer to this question. The best solution depends on many aspects, like environmental conditions, ambient temperature, total power dissipation of the power amplifier and mechanical space for additional components. Kuhne electronic recommends heat sinks and fans for some of the power amplifiers. These are suitable for normal environments (e.g. indoors at room temperature). However, if the amplifiers are run under extreme conditions, an individual solution must be realized by the user. Some types of heat sinks and fans are available from Kuhne electronic. As a service, the power amplifiers can be ordered together with heat sink and fans. Please request for more information!
27
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Broadband Power Amplifier for 500...2500 MHz
FEATURES Overvoltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage) APPLICATIONS EMC measurement Additional power for standard signal generators Measurement and laboratory equipment OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended heat sink: SK 120-75 Type
Frequency range Saturation power Gain Noise figure @ 18 C Output power P1dB VSWR Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
1)
Type
Frequency range Output power Saturation power Gain Noise figure @ 18 C Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA BB 233 BBA
500 ... 2500 MHz typ. 1 W typ. 3 W (2.3 GHz) min. 30 dB typ. 6 dB +55 C + 12 ... 14 V DC typ. 1.7 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium case 130 x 60 x 20 typ. 250 g
KU PA BB 2025 A
50 ... 2500 MHz typ. 3 W (50 ... 500 MHz) typ. 2 W (500 ... 2500 MHz) typ. 33 dB max. 4 dB min. 2 W (50 ... 500 MHz) typ. 1.5 W (500 ... 2500 MHz) max. 1.8:1 +55 C +24 ... 26 V DC typ. 700 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 140 g
Type
Frequency range Saturation power Gain Noise figure @ 18 C Output power P1dB VSWR Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA BB 5030 A
50 ... 3000 MHz typ. 4 W (50 ... 1500 MHz) typ. 2.8 W (1500 ... 3000 MHz) typ. 32 dB max. 6 dB min. 3 W (50 ... 1500 MHz) typ. 2 W (1500 ... 3000 MHz) max. 1.8:1 +55 C +24 ... 26 V DC typ. 850 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 140 g
APPLICATIONS EMC measurement Additional power for standard signal generators Measurement and laboratory equipment Driver amplifier
OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended heat sink: SK 120-75 28
1)
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
VHF MOSFET Power Amplifier for 130...170 MHz
FEATURES Good linearity Built-in low pass filter for good harmonic rejection Over voltage protection and reverse polarity protection Monitor outputs for forward and reverse power detection
APPLICATIONS Analog and digital transmission systems Power amplifier for radio amateur applications (SSB, CW) OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 150-62 1) Recommended fan: FAN 60x60 HP 12 V 1) IMPORTANT NOTES Recommended output power for radio amateur applications: Modulation type: CW/FM up to 60 W, SSB up to 20 W
APPLICATIONS Analog and digital transmission systems Power amplifier for radio amateur applications (SSB, CW) OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: SP 320 W 12 Recommended heat sink: SK 200-125 1) Recommended fan: FAN 60x60 12 V 1) IMPORTANT NOTES Recommended output power for radio amateur applications: Modulation type: CW/FM up to 120 W, SSB up to 40 W
Type
Frequency range Input power Output power P1dB Output power Gain flatness Harmonic rejection IM 3 Efficiency Input retrun loss (S11) VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 1317-60 HY
130 ... 170 MHz typ. 50 mW typ. 20 W typ. 60 W +/- 2 dB typ. 60 dB typ. -29 dBc @ 20 W PEP typ. 45 % @ 60 W typ. 20 dB max. 1.8 : 1 +55 C +12 ... 14 V DC max. 12 A typ. 4 A SMA-female, 50 ohms N-female, 50 ohms milled aluminium 130 x 60 x 20 typ. 270 g
MKU PA 1317-120 HY
135 ... 170 MHz typ. 100 mW typ. 40 W typ. 120 W +/- 2 dB typ. 60 dB typ. -28 dBc @ 40 W PEP typ. 45 % @ 120 W typ. 19 dB max. 1.8 : 1 +55 C +12 ... 14 V DC max. 21 A typ. 8 A SMA-female, 50 ohms N-female, 50 ohms milled aluminium 124 x 80 x 22 typ. 400 g
29
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
UHF MOSFET Power Amplifier for 400...470 MHz
FEATURES Good linearity Built-in low pass filter for good harmonic rejection Over voltage protection and reverse polarity protection Monitor output for forward power detection
APPLICATIONS Analog and digital transmission systems Power amplifier for radio amateur applications (SSB, CW) OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 150-62 1) Recommended fan: FAN 60x60 12 V 1) ACCESSORIES Recommended output power for radio amateur applications: Modulation type: CW/FM up to 60 W, SSB up to 20 W
1) Dimensioned for 25 C ambient temperature
APPLICATIONS Analog and digital transmission systems Power amplifier for radio amateur applications (SSB, CW) OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: SP 320 W 12 Recommended heat sink: SK 200-125 1) Recommended fan: 2 pieces FAN 60x60 HP 12 V ACCESSORIES Recommended output power for radio amateur applications: Modulation type: CW/FM up to 120 W, SSB up to 35 W
1)
Type
Frequency range Input power Output power P1dB Output power Gain flatness Harmonic rejection IM 3 Efficiency Input retrun loss (S11) VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 4047-60 HY
400 ... 470 MHz typ. 50 mW typ. 20 W typ. 60 W +/- 1 dB typ. 60 dB typ. -27 dBc @ 20 W PEP typ. 45 % @ 60 W typ. 10 dB max. 1.8 : 1 +55 C +12 ... 14 V DC max. 10 A typ. 4 A SMA-female, 50 ohms N-female, 50 ohms milled aluminium 130 x 60 x 20 typ. 270 g
MKU PA 4047-120 HY
400 ... 470 MHz typ. 100 mW typ. 35 W typ. 120 W +/- 1 dB typ. 60 dB typ. -27 dBc @ 40 W PEP typ. 45 % @ 120 W typ. 10 dB max. 1.8 : 1 +55 C +12 ... 14 V DC max. 28 A typ. 8 A SMA-female, 50 ohms N-female, 50 ohms milled aluminium 124 x 80 x 22 typ. 400 g
30
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
UHF MOSFET Power Amplifier for 450...500 MHz
FEATURES Good linearity Built-in low pass filter for good harmonic rejection Overvoltage protection and reverse polarity protection Monitor output for forward power detection
Type
Frequency range Input power Output power P1dB Saturation output power Gain Gain flatness Harmonic rejection IM3 @ 5 W PEP VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector Output connector Case Dimensions (mm) Weight
KU PA 4550 A
450 ... 500 MHz typ. 30 mW (3 mW optional) typ. 23 W typ. 35 W typ. 30 dB +/- 1 dB typ. 60 dB typ. -37 dBc max. 1.8 : 1 +55 C +12 V DC max. 8.5 A typ. 4 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 130 x 60 x 20 typ. 260 g
ACCESSORIES Recommended heat sink: SK 150-62 1) Recommended fan: FAN 60x60 12 V 1) APPLICATIONS Digital Video Broadcast Analog and digital transmission systems COFDM systems using modulation types QPSK, QAM Options Amplifier installed into 19 rackmount case Gain typ. 40 dB (input power typ. 3 mW) BLOCK DIAGRAM
Type
Frequency range Input power Saturation power Gain Harmonic rejection VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 0850 N
800 ... 900 MHz typ. 30 ... 50 mW (max. 50 mW) typ. 1 W typ. 15 dB typ. 28 dB (at 1 W output power) max. 1.8 : 1 +55 C +12 ... 14 V DC typ. 0.35 A typ. 0.35 A N-female, 50 ohms N-female, 50 ohms milled aluminium 50 x 30 x 22 typ. 90 g
31
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Linear Power Amplifiers for 1240...1300 MHz
FEATURES Monitor output for forward power detection (DC voltage) Overvoltage protection ON / OFF control with DC voltage APPLICATIONS Analog and digital transmission systems OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES (MKU PA 133 HY2) Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 150-62 1) Recommended fans: FAN 60x60 12 V 1) ACCESSORIES (MKU PA 1360 HY) Recommended power supply unit: SP 320 W 12 Recommended heat sink: SK 200-160 1) Recommended fans: 2 pieces FAN 60x60 HP 12 V ACCESSORIES (MKU PA 13120 HY) Recommended power supply unit: SP 500 W 12 Recommended heat sink: SK 320-240 1) Recommended fans: 3 pieces FAN 80x80 HP 12 V
1)
1)
Type
Frequency range Input power Output power Saturation power Harmonic rejection Efficiency ON voltage (PTT) Input return loss (S11) VSWR of load Maximum case temperature Monitor Output Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Dimensions (mm) Case Weight
MKU PA 1360 HY
1240 ... 1300 MHz typ. 0.2 W, max. 0.4 W typ. 60 W @ 13.8 V min. 75 W 50 dB typ. 30 % +12...13.8 V min. 12 dB max. 1.8 : 1 +55 C Yes +12...13.8 V max. 20 A typ. 8 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 124 x 80 x 22 typ. 400 g
MKU PA 13120 HY
1240 ... 1300 MHz typ. 0.4 W, max. 0.8 W typ. 120 W @ 13.8 V min. 150 W 50 dB typ. 30 % +12...13.8 V min. 16 dB max. 1.8 : 1 +55 C Yes +12...13.8 V max. 40 A (max. 50 A) typ. 14 A SMA-female, 50 ohms N-female, 50 ohms milled aluminium 157 x 152 x 26 typ. 1300 g
32
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifier for 1240...1300 MHz
FEATURES Reverse polarity protection APPLICATIONS Low power applications Driver amplifier Analog and digital transmission systems Type
Frequency range RF input power Maximum RF input power Output power Input return loss (S11) VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case
MKU PA 1301 A
1240 ... 1300 MHz 50 mW 50 mW 1W min. 6 dB 1.8 : 1 55 C +12...14 V DC max. 0.45 A typ. 0.3 A SMA-female, 50 ohms SMA-female, 50 ohms 50 x 30 x 22 milled aluminium typ. 65 g
ACCESSORIES (MKU PA 1330 A) Recommended power supply unit: S 150 W 24 Recommended heat sink: SK 150-62 1) Recommended fans: FAN 60x60 24 V 1) ACCESSORIES (MKU PA 1350 A) Recommended power supply unit: S 150 W 24 Recommended heat sink: SK 200-80 1) Recommended fans: FAN 80x80 24 V 1)
1) Dimensioned for 25 C ambient temperature
MKU PA 1330 A
1240 ... 1300 MHz typ. 1 W (max. 1.5 W) min. 30 W typ. 40 W typ. 14 dB typ. 37 dB @ 30 W typ. -48 dBc@ 10 W PEP typ. -30 dBc@ 30 W PEP typ. 55 % +12 ... 14 V DC (ON) typ. 10 dB max. 1.8 : 1 Yes +55 C +26 V DC max. 3.5 A typ. 0.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 130 x 60 x 20 typ. 240 g
MKU PA 1350 A
1240 ... 1300 MHz 3 W, max. 4 W min. 50 W min. 60 W typ. 11 dB typ 45 dB @ 50 W typ. -40 dBc @ 30 W PEP typ. 45 % +12 ... 14 V DC (ON) min. 10 dB max. 1.8 : 1 Yes +55 C +26 V DC max. 6 A typ. 0.45 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 130 x 60 x 20 typ. 240 g
33
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Type
Frequency range Input power Output power Saturation power Efficiency IM3 @ 100 W PEP IM3 @ 30 W PEP Harmonic rejection Input return loss (S11) ON voltage VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector,impedance Case Dimensions (mm) Weight
1)
Type
Frequency range Input power Output power Saturation power Efficiency Input return loss (S11) VSWR of load Maximum case temperature Monitor output PTT Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
1)
34
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
High Power Amplifier for 1240...1300 MHz
FEATURES Overheat protection Overvoltage protection Reverse polarity protection Monitor output for forward power detection (DC voltage)
OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: RSP 1500 W 27 Recommended heat sink: SK 320-240 1) Recommended Heat-Conductive Paste: Arctic Silver 5 Recommended fan: 3 pieces FAN 80x80 HP 24 V 1) Circulator as a protection in case of bad antenna matching
We explicit point out that the recommended combination of heat sink and fan is not dimensioned for constant full output power of the power amplifier. The duty-cycle should not exceed 50% (1min transmitting / 1min receiving (WSJT)). Heat sinks with higher heat dissipation as well as fans with higher air flow for the recommended heat sinks are currently not available at Kuhne Electronic.
1) Dimensioned for 25 C ambient temperature
Type
Frequency range Input power Output power Saturation power Efficiency Input return loss (S11) VSWR of load Maximum case temperature Monitor output Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Dimensions (mm) Case Weight
MKU PA 13500 CU
1240 ... 1300 MHz 10 W, max. 15 W 500 W min. 550 W typ. 40 % typ. 10 dB max. 1.8:1 +55 C Yes + 28 V DC max. 50 A typ. 6 A SMA-female, 50 ohms N-female, 50 ohms 190 x 152 x 38.5 milled copper, silver-plated typ. 4800 g
35
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Combiner (Splitter) for 1266 ... 1326 MHz
FEATURES Passive Power Combiner / quadrature hybrid Internal 100 W load resistor with detector for error power detection APPLICATIONS KU DIV 1300-1-SMA Can be used to combine two power amplifiers (MKU PA 13500 CU) to achieve more than 1000 W output power KU DIV 1300-1-N Can be used to combine two power amplifiers to achieve double output power KU DIV 1300-1-7/16 Can be used to combine two power amplifiers (MKU PA 13500 CU) to achieve more than 1000 W output power
Type
Center frequency Insertion loss Isolation Input power Output power Input connector, impedance Output connector, impedance Load resistor 50 ohms Monitor (MON)
KU DIV 1300-1-SMA
1266 ... 1326 MHz typ. 3.1 dB typ. 25 dB, min. 20 dB 2 x 25 W 50 W SMA-female, 50 ohms SMA-female, 50 ohms max. 100 W DC voltage output for monitoring the detected error power (in case of reflected power or asymmetry) 2.2 V @ 20 W (error power at the load resistor) 4.0 V @ 80 W (error power at the load resistor) milled aluminium 147 x 140 x 26.5 typ. 495 g
KU DIV 1300-1-N
1266 ... 1326 MHz typ. 3.1 dB typ. 25 dB, min. 20 dB 2 x 300 W 600 W N-female, 50 ohms N-female, 50 ohms max. 100 W DC voltage output for monitoring the detected error power (in case of reflected power or asymmetry) 2.2 V @ 20 W (error power at the load resistor) 4.0 V @ 80 W (error power at the load resistor) milled aluminium 147 x 140 x 26.5 typ. 520 g
KU DIV 1300-1-7/16
1266 ... 1326 MHz typ. 3.1 dB typ. 25 dB, min. 20 dB 2 x 600 W 1200 W N-female, 50 ohms 7/16-female, 50 ohms max. 100 W DC voltage output for monitoring the detected error power (in case of reflected power or asymmetry) 2.2 V @ 20 W (error power at the load resistor) 4.0 V @ 80 W (error power at the load resistor) milled aluminium 147 x 140 x 26.5 typ. 740 g
Typical MON-values
36
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 1300...1450 MHz
FEATURES High linearity Reverse polarity protection Small mechanical dimensions APPLICATIONS Low power applications Driver amplifier Analog and digital transmission systems
Type
Frequency range Input power Output power Gain IM3 @ 500 mW PEP VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 1401 A KU PA 1401 B
KU PA 1401 A: 1300 ... 1400 MHz KU PA 1401 B: 1350 ... 1450 MHz 50 ... 80 mW typ. 1 W typ. 13 dB min. -32 dBc max. 1.8 : 1 +55 C +12 ... 14 V DC max. 500 mA typ. 350 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 50 x 30 x 22 typ. 70 g
Type
Frequency range Input power Output power Saturation power Gain Harmonic rejection IM3 @ 10 W PEP IM3 @ 30 W PEP Efficiency ON voltage Input return loss (S11) VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 1430 A KU PA 1430 B
KU PA 1430 A: 1300 ... 1400 MHz KU PA 1430 B: 1350 ... 1450 MHz typ. 1 W (max. 1.5 W) KU PA 1430 A: typ. 30 ... 40 W KU PA 1430 B: typ. 25 W KU PA 1430 A: typ. 40 W KU PA 1430 B: typ. 30 W KU PA 1430 A: typ. 14 dB KU PA 1430 B: typ. 13 dB typ. 37 dB @ 30 W typ. -41 dBc typ. -27 dBc typ. 55 % +12 ... 14 V DC (ON) KU PA 1430 A: typ. 10 dB KU PA 1430 B: typ. 8 dB max. 1.8 : 1 +55 C +26 V DC max. 3.5 A typ. 0.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 130 x 59 x 20 typ. 250 g
37
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 1450...1680 MHz
FEATURES GaAs FET technology High linearity Overvoltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage)
Type
Frequency range Input power Output power P1dB Saturation power Gain Gain flatness IM3 @ 1 W PEP VSWR of load Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 1505 A KU PA 1605 A
KU PA 1505 A: 1450 ... 1600 MHz KU PA 1605 A: 1600 ... 1680 MHz typ. 10 mW (3 mW optional) min. 4 W typ. 5 W typ. 27 dB max. +/- 1 dB min. -50 dBc max. 1.8 : 1 +55 C +12 ... 14 V DC max. 1.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 130 x 59 x 20 typ. 250 g
APPLICATIONS Digital broadcast systems (DAB, DVB) COFDM systems using modulation types QPSK, QAM Analog transmission systems Driver amplifier
ACCESSORIES Recommended heat sink: SK 120-75 OPTIONS Gain typ. 31 dB (input power typ. 3 mW) Amplifier mounted on heat sink with fans
1)
Type
Frequency range Input power Output power P1dB Saturation power Small signal gain Gain flatness Harmonic rejection IM3 @ 20 W PEP Efficiency ON voltage Input return loss (S11) VSWR of load Maximum case temperature
1)
KU PA 15150 A KU PA 16150 A
KU PA 15150 A: 1450 ... 1500 MHz KU PA 16150 A: 1620 ... 1670 MHz 4W KU PA 15150 A: typ. 120 W KU PA 16150 A: typ. 140 W KU PA 15150 A: typ. 140 W KU PA 16150 A: typ. 150 W KU PA 15150 A: typ. 16 dB KU PA 16150 A: typ. 18 dB max. +/- 1 dB KU PA 15150 A: 32 dB @ 140 W KU PA 16150 A: 41 dB @ 30 W -40 dBc typ. 45 % +9 ... 14 V DC (ON) typ. 10 dB max. 1.8 : 1 +55 C +28 V DC max. 12 A @ 140 W (CW) typ. 1.5 A SMA-female, 50 ohms N-female, 50 ohms milled aluminium 130 x 59 x 20 typ. 260 g
Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
38
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifier for 1400...1600 MHz
FEATURES LD MOSFET technology High linearity High efficiency Overvoltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage)
APPLICATIONS Digital broadcast systems (DAB, DVB) COFDM systems using modulation types QPSK, QAM Analog transmission systems OPTIONS Amplifier installed into 19 rackmount case Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: SP 150 W 27 Recommended heat sink: SK 200-80 1) Recommended fan: FAN 80x80 24 V 1) BLOCK DIAGRAM
Type
Frequency range Input power Output power P1dB Saturation power Output power COFDM Small signal gain Gain flatness Harmonic rejection IM 3 @ 45 W PEP Efficiency Input return loss (S11) VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 1545 A
1400 ... 1600 MHz typ. 1 W, max. 2 W min. 45 W typ. 60 W min. 16 dB, typ. 17 dB max. +/- 1 dB 45 dB @ 45 W max. -30 dBc typ. 50 % @ 45 W min. 8 dB, typ. 10 dB max. 1.8 : 1 +55 C +28 V DC typ. 3.5 A @ 45 W, max. 5 A @ 60 W typ. 0.55 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 143 g
KU PA 2345 A
2300 ... 2500 MHz typ. 1.6 W, max. 3 W min. 40 W typ. 50 W max. 10 W typ. 14 dB, min. 13 dB max. +/- 1 dB 23 dB @ 45 W min. -38 dBc typ. 40 % @ 45 W min. 8 dB max. 1.8 : 1 +55 C +28 V DC typ. 4 A @ 40 W, max. 4.5 A typ. 700 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 145 g
39
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 1700...2200 MHz
FEATURES LD-MOSFET-technology High voltage and reverse polarity protection Monitor output for forward power detection (DC voltage) Milled aluminium case
APPLICATIONS Mobile communication COFDM systems with modulation QPSK, QAM Analog transmission systems Measurement and laboratory equipment
OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: SP 150 W 27 Recommended heat sink: SK 200-80 1) Recommended fan: FAN 80x80 24 V 1)
1) Dimensioned for 25 C ambient temperature
KU PA 1940 A
1700 ... 2200 MHz typ. 200 mW max. 50 W (CW) min. 45 W (CW) typ. 10 W typ. 31 dB max. +/- 2 dB DC voltage, uncalibrated typ. 40% @ P1dB typ. 30 dB
40
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 1800...2100 MHz
FEATURES Overvoltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage) APPLICATIONS Digital broadcast systems (DAB, DVB) Analog and digital transmission systems OPTIONS Amplifier installed into 19 rackmount case Amplifier mounted on heat sink with fans ACCESSORIES Recommended heat sink: SK 200-80 1) Recommended fans: FAN 80x80 24 V 1)
Type
Frequency range Input power Output power Gain Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 1845 A
1800 ... 2000 MHz 1.5 W 45 W 16 dB +28 V DC max. 4.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 150 g
KU PA 2045 A
2000 ... 2100 MHz 1.5 W 45 W 16 dB +28 V DC 4.4 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 150 g
Type
Frequency range Input power Output power P1dB Gain Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 1810 A
1800 ... 1900 MHz 50 mW 10 W 23 dB +28 V DC 0.9 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 150 g
41
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 1900...2200 MHz
FEATURES LD-MOSFET technology Over voltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage) Milled aluminium case
APPLICATIONS Mobile communication COFDM systems with modulation QPSK, QAM Analog transmission systems Measurement and laboratory equipment
OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: SP 150 W 27 Recommended heat sink: SK 200-80 1) Recommended fan: FAN 80x80 24 V 1)
1) Dimensioned for 25 C ambient temperature
KU PA 2145 A
1900 ... 2200 MHz typ. 60 mW min. 35 W (CW) min. 55 W (CW) min. 15 W min. 26 dB typ. +/- 0.5 dB DC voltage, uncalibrated min. 40% min. 35 dB
42
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Linear GaAs FET Power Amplifiers for the S-Band for 2100...2700 MHz
FEATURES High linearity (class A operation) Overvoltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage) APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK OPTIONS Amplifier mounted on heat sink ACCESSORIES Recommended heat sink: SK 120-75
1) Dimensioned for 25 C ambient temperature 1) Block diagram for KU PA 222 TX, KU PA 242 TX and KU PA 262 TX
BLOCK DIAGRAM
Type
Frequency range
Input power Output power Saturation power Gain Gain flatness IM 3 @ 1 W PEP Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
typ. 50 mW min. 4 W min. 5 W typ. 20 dB +/- 1 dB typ. -51 dBc +55 C +12 ... 14 V DC max. 1.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium case 80 x 60 x 20 typ. 148 g
43
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 2300...2400 MHz
FEATURES GaAs FET technology High linearity Over voltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage) Logic ON / OFF control (ON at 5 14 V)
APPLICATIONS Amateur Radio Analog and digital operation modes (SSB, CW, ATV, DATV) With reduced power suitable for DATV (digital amateur television) Digital broadcast systems (DVB-T, DVB-S) Analog and digital transmission systems
OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 150-62 1) Recommended fans: FAN 60x60 12 V 1)
1) Dimensioned for 25 C ambient temperature
Type
Frequency range Input power Output power P1dB Saturation power Output power COFDM Gain Gain flatness Harmonic rejection @ 20 W IM3 @ 10 W PEP IM3 @ 20 W PEP ON voltage Input return loss (S11) VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
44
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 2300...2450 MHz
FEATURES GaAs FET technology High linearity (class A operation) Overvoltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage) ON / OFF control with DC voltage (ON at +5 ... 14 V) APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Analog and digital transmission systems ACCESSORIES Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 200-80 1) Recommended fans: FAN 80x80 12 V 1)
Type
Frequency range Input power Output power P1dB Saturation power Gain IM3 @ 10 W PEP ON voltage VSWR of load Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 2325 BLK
2300 ... 2450 MHz typ. 15 mW min. 20 W typ. 25 ... 30 W (CW) typ. 31 dB typ. -47 dBc +5 ... 14 V DC (ON) max. 1.8 : 1 +55 C +11 ... 14 V DC typ. 7.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 178 x 60 x 20 typ. 340 g
Type
Frequency range Input power Output power P1dB Saturation power Gain IM3 @ 15 W PEP VSWR of load Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 2325 DLK
2300 ... 2450 MHz typ. 5 W typ. 50 W 50 ... 60 W (CW) typ. 10 dB typ. -40 dBc max. 1.8 : 1 +55C +13 V DC typ. 10.0 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium case 130 x 60 x 20 typ. 250 g
APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Analog and digital transmission systems ACCESSORIES Recommended power supply unit: SP 200 W 12 Recommended heat sink: SK 150-62 1) Recommended fans: FAN 60x60 HP 12 V 1)
1) Dimensioned for 25 C ambient temperature
45
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Linear GaAs FET Power Amplifier for 2100...2700 MHz
FEATURES GaAs FET technology High linearity (class A operation) Overvoltage protection and reverse polarity protection Adjustable ALC (automatic level control) Monitor output for detected forward power (DC voltage)
APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Digital broadcast systems COFDM systems using modulation types QPSK, QAM Analog transmission systems
OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended heat sink: SK 200-80 1) Recommended fans: FAN 80x80 12 V 1) BLOCK DIAGRAM
OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended heat sink: SK 200-80 1) Recommended fans: FAN 80x80 12 V 1) BLOCK DIAGRAM
Type
Frequency range Input power Output power P1dB Saturation output power Gain Gain flatness IM3 @ 1 W PEP VSWR of load VSWR protection Supply voltage Maximum case temperature Current consumption Input connector Output connector Case Dimensions (mm) Weight
KU PA 2127 ALK
2100 ... 2700 MHz typ. 1 mW min. 4 W typ. 5 W typ. 39 dB +/- 1 dB typ. -51 dBc max. 1.8 : 1 no +11 ... 14 V DC +55 C typ. 1.6 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 158 x 59 x 20 typ. 280 g
KU PA 2327 AL
2300 ... 2700 MHz typ. 1 mW min. 4 W typ. 5 W typ. 39 dB +/- 1 dB typ. -50 dBc max. 1.8 : 1 isolator +11 ... 14 V DC +55 C typ. 1.6 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 158 x 59 x 20 typ. 300 g
46
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Linear GaAs FET Power Amplifier for the S-Band for 2000...2700 MHz
FEATURES GaAs FET technology High linearity (class A operation) Overvoltage protection and reverse polarity protection Adjustable ALC (automatic level control) Monitor output for detected forward power (DC voltage) ON / OFF controll with DC voltage (ON at 5 ... 14 V)
Linear GaAs FET Power Amplifier for the S-Band for 2300...2700 MHz
FEATURES GaAs FET technology High linearity (class A operation) Good harmonic rejection Isolator for protection against high VSWR Overvoltage protection and reverse polarity protection Monitor outputs for forward and reverse power detection (DC voltage) Adjustable ALC (automatic level control) ON / OFF control with DC voltage (ON at 5 ... 14 V) APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK, QAM Analog transmission systems
APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Digital broadcast systems COFDM systems using modulation types QPSK, QAM Analog transmission systems
OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 200-80 1) Recommended fan: FAN 80x80 12 V 1)
1) Dimensioned for 25 C ambient temperature
OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 200-80 1) Recommended fan: FAN 80x80 12 V 1)
Type
Frequency range Input power Output power P1dB Saturation output power RF output power COFDM Gain Gain flatness IM3 @ 5 W PEP IM3 @ 7 W PEP IM3 @ 10 W PEP ON voltage VSWR of load VSWR protection Maximum case temperature Supply voltage Current consumption Quiescent current Input connector Output connector Case Dimensions (mm) Weight
KU PA 2027 BK
2000 2700 MHz typ. 5 mW (max. 10 mW) typ. 8 W typ. 10 W 0.8 ... 2.0 W typ. 37 dB typ. +/- 2 dB typ. -50 dBc @ 2400 MHz
KU PA 2327 BL
2300 ... 2700 MHz typ. 1 ... 5 mW (max. 10 mW) typ. 8 W min. 9 W 0.8 ... 2.0 W typ. 37 dB typ. +/- 2 dB typ. -40 dBc typ. -27 dBc
+5 ... 14 V DC (ON) max. 1.8 : 1 +55 C +11 ... 14 V DC max. 3.5 A typ. 3.0 A SMA, female / 50 ohms SMA, female / 50 ohms milled aluminium 156 x 63 x 22 typ. 370 g
+5 ... 14 V DC (ON) max. 1.8 : 1 isolator +55 C +11 ... 14 V DC max. 3.5 A typ. 3.0 A SMA, female / 50 ohms SMA, female / 50 ohms milled aluminium 156 x 64 x 22 typ. 380 g
47
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifier for 2300...2700 MHz
With the KU PA 2327 LD-20 Kuhne electronic puts a S-BAND power amplifier for the frequency range 23002700 MHz on the market. This power amplifier is developed for digital applications and can be supplied with a huge voltage range of 1126 V. Another highlight to comparable power amplifiers is the TRUE-RMS monitor output for observing the output power. With this feature it is possible to assign the monitor voltage to a defined output power regardless of the type of modulation. With the integrated ALC (automatic level control) it is possible to adjust the output power to a desired power level. This level is kept constant over the whole frequency range. Through the use of LDMOS-technique a high efficiency is reached. This results in lower current consumption and longer running time of battery powered systems. Furthermore an isolator for protecting the power amplifier in case of bad VSWR and a monitor output for controlling the reflected power is implemented, as well as a protective function against polarity reversal and voltage spikes.
KU PA 2327 LD-20
2300 2700 MHz typ. -3 ... 1.5 dBm max. 7 dBm (5 mW) typ. 18 W (CW) min. 21 W (CW) typ. 4 ... 7 W typ. 44 dB typ. +/- 0.5 dB min. 12 dB adjustable ALC
FEATURES LDMOS technology Isolator for protection against high VSWR Over voltage protection and reverse polarity protection Adjustable ALC (automatic level control) True-RMS Detector output for forward detection (DC voltage) Monitor output for forward and reverse power detection (DC voltage) Logic ON / OFF control (ON at 5 14 V) APPLICATIONS Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK, QAM Multichannel Multipoint Distribution Service (MMDS) Analog transmission systems OPTIONS Amplifier available without isolator Amplifier installed into 19 rackmount case Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: S 150 W 24 Recommended heat sink: SK 200-80 1) Recommended fan: FAN 80x80 24 V 1)
1) Dimensioned for 25 C ambient temperature
48
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 2100...2700 MHz
FEATURES GaAs FET technology High linearity (class A operation) Good harmonic rejection Isolator for protection against high VSWR Overvoltage protection and reverse polarity protection Monitor outputs for forward and reverse power detection (DC voltage) Adjustable ALC (automatic level control) ON / OFF control with DC voltage (ON at 5 ... 14 V) APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK, QAM Analog transmission systems
Block diagram for KU PA 2123 A, KU PA 2325 A and KU PA 2527 A
BLOCK DIAGRAM
OPTIONS Amplifier installed into 19 rackmount case Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 300-62 1) Recommended fans: FAN 60x60 12 V 1)
1) Dimensioned for 25 C ambient temperature
Type
Frequency range Input power Output power P1dB Saturation power Output power COFDM Gain Gain flatness Harmonic rejection IM3 @ 10 W PEP ON voltage Automatic Level Control (ALC) VSWR protection Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 2123 A
2100 ... 2300 MHz typ. 0.1 mW (-10 dBm) min. 20 W (+43 dBm) 25 ... 30 W (+44 ... 45 dBm) typ. 2 ... 5 W typ. 55 dB typ. +/- 0.5 dB, max. +/- 1 dB typ. 60 dB typ. -47 dBc +5 ... 14 V DC (ON) adjustable ALC isolator +55 C +11 ... 14 V DC typ. 8 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 212 x 63 x 22 typ. 500 g
KU PA 2325 A
2300 ... 2500 MHz typ. 0.1 mW (-10 dBm) min. 20 W (+43 dBm) 25 ... 30 W (+44 ... 45 dBm) typ. 2 ... 5 W typ. 55 dB typ. +/- 0.5 dB, max. +/- 1 dB typ. 60 dB typ. -47 dBc +5 ... 14 V DC (ON) adjustable ALC isolator +55 C +11 ... 14 V DC typ. 8 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 212 x 63 x 22 typ. 500 g
KU PA 2527 A
2500 ... 2700 MHz typ. 0.1 mW (-10 dBm) min. 20 W (+43 dBm) 25 ... 30 W (+44 ... 45 dBm) typ. 2 ... 5 W typ. 53 dB typ. +/- 0.5 dB, max. +/- 1 dB typ. 60 dB typ. -47 dBc +5 ... 14 V DC (ON) adjustable ALC isolator +55 C +11 ... 14 V DC typ. 8 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 212 x 63 x 22 typ. 500 g
49
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 2100...2700 MHz
FEATURES GaAs FET technology High linearity (class A operation) Good harmonic rejection Isolator for protection against high VSWR Overvoltage protection and reverse polarity protection Monitor outputs for forward and reverse power detection (DC voltage) ON / OFF control with DC voltage (ON at 5 ... 14 V) APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK, QAM Analog transmission systems BLOCK DIAGRAM
OPTIONS Amplifier installed into 19 rackmount case Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 200-80 1) Recommended fans: FAN 80x80 12 V 1)
1) Dimensioned for 25 C ambient temperature
Type
Frequency range Input power Output power P1dB Saturation power Output power COFDM Gain Gain flatness Harmonic rejection IM3 @ 10 W PEP ON voltage VSWR protection Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 2123 B
2100 ... 2300 MHz typ. 15 mW (12 dBm) min. 20 W (43 dBm) 25 ... 30 W (44 ... 45 dBm) typ. 2 ... 5 W typ. 31 dB typ. +/- 0.5 dB, max. +/- 1 dB typ. 60 dB typ. -47 dBc +5 ... 14 V DC (ON) isolator +55 C +11 ... 14 V DC typ. 7.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 178 x 60 x 20 typ. 350 g
KU PA 2325 B
2300 ... 2500 MHz typ. 15 mW (12 dBm) min. 20 W (43 dBm) 25 ... 30 W (44 ... 45 dBm) typ. 2 ... 5 W typ. 31 dB typ. +/- 0.5 dB, max. +/- 1 dB typ. 60 dB typ. -47 dBc +5 ... 14 V DC (ON) isolator +55 C +11 ... 14 V DC typ. 7.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 178 x 60 x 20 typ. 350 g
KU PA 2527 B
2500 ... 2700 MHz typ. 15 mW (12 dBm) min. 20 W (43 dBm) 25 ... 30 W (44 ... 45 dBm) typ. 2 ... 5 W typ. 31 dB typ. +/- 0.5 dB, max. +/- 1 dB typ. 60 dB typ. -47 dBc +5 ... 14 V DC (ON) isolator +55 C +11 ... 14 V DC typ. 7.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 178 x 60 x 20 typ. 350 g
50
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 2100...2700 MHz
FEATURES GaAs FET technology High linearity (class A operation) Good harmonic rejection Isolator for protection against high VSWR Overvoltage protection and reverse polarity protection Monitor outputs for forward and reverse power detection (DC voltage) ON / OFF control with DC voltage (ON at 5 ... 14 V) APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK, QAM Analog transmission systems
OPTIONS Amplifier installed into 19 rackmount case Amplifier mounted on heat sink with fans ACCESSORIES for KU PA 2123 C / KU PA 2325 C / KU PA 2527 C Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 150-62 1) Recommended fans: FAN 60x60 12 V 1)
1) Dimensioned for 25 C ambient temperature
OPTIONS Amplifier installed into 19 rackmount case Amplifier mounted on heat sink with fans ACCESSORIES for KU PA 2123 D / KU PA 2325 D / KU PA 2527 D Recommended power supply unit: SP 200 W 12 Recommended heat sink: SK 150-62 1) Recommended fans: FAN 60x60 HP 12 V 1)
Type
Frequency range
Input power Output power P1dB Saturation power Output power COFDM Gain Gain flatness Harmonic rejection IM3 ON voltage VSWR protection Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
51
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
High Power Amplifiers for 2100...2700 MHz
FEATURES GaAs FET technology High linearity (class A operation) Good harmonic rejection Isolator for protection against high VSWR Overvoltage protection and reverse polarity protection Monitor outputs for forward and reverse power detection (DC voltage) ON / OFF control with DC voltage (ON at 5 ... 14 V) Overheat protection
APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK, QAM Analog transmission systems
OPTIONS Amplifier installed into 19 rackmount case Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: SP 500 W 12 Recommended heat sink: SK 200-125 1) Recommended fans: 2 pieces FAN 60x60 HP 12 V
1) Dimensioned for 25 C ambient temperature
1)
Type
KU PA 2325 F KU PA 2527 F
KU PA 2325 F: 2300 ... 2500 MHz KU PA 2527 F: 2500 ... 2700 MHz typ. 15 W typ. 150 W typ. 15 ... 38 W typ. 10 dB typ. +/- 0.8 dB typ. 50 dB typ. -47 dBc typ. -35 dBc +5 ... 14 V DC (ON) isolator, reverse power max. 50 W +55 C +13 V DC typ. 30 A SMA-female, 50 ohms N-female, 50 ohms milled copper, silver-plated 172 x 100 x 22 typ. 2200 g
Frequency range
Input power Output power Output power COFDM Gain Gain flatness Harmonic rejection IM3 @ 16 W PEP IM3 @ 50 W PEP ON voltage VSWR protection Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
52
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
High Power Amplifiers for 2000...2350 MHz
FEATURES LD MOSFET technology Overvoltage protection and reverse polarity protection ON / OFF control with DC voltage Monitor output for forward power detection (DC voltage)
APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK, QAM Analog transmission systems
OPTIONS Amplifier installed into 19 rackmount case Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: SP 500 W 27 Recommended heat sink: SK 200 - 160 1) Recommended fans: 2 pieces FAN 80x80 HP 24 V
1) Dimensioned for 25 C ambient temperature
1)
Type
Frequency range
Input power Output power Saturation power Spurious and harmonic rejection ON voltage Input return loss (S11) VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
53
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Linear High Power Amplifier for 2300...2400 MHz
FEATURES LD MOSFET technology Overvoltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage) ON / OFF control with DC voltage APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Analog and digital transmission systems OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: SP 320 W 27 Recommended heat sink: SK 200-80 1) Recommended fan: FAN 80x80 HP 24 V 1)
1) Dimensioned for 25 C ambient temperature
Type
Frequency range Input power Output power Small signal gain Gain flatness Saturation power IM 3 @ 50 W PEP Efficiency Spurious and harmonic rejection ON voltage Input return loss (S11) VSWR of load Maximum case temperature Monitor output (power) Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 23130 A
2300...2400 MHz typ. 5 W, max. 8 W 130 W (CW) min. 12 dB max. +/- 1 dB typ. 150 W -42 dBc typ. 45 % 33 dB @ 100 W +9 ... 14 V DC (ON) typ. 10 dB max. 1.8 : 1 +55 C Yes +28 V DC max. 12 A @ 130 W (CW) typ. 1.2 A SMA-female, 50 ohms N-female, 50 ohms milled aluminium 130 x 60 x 20 typ. 255 g
54
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Linear High Power Amplifier for 2300...2400 MHz
FEATURES LD MOSFET technology Monitor output for forward power detection (DC voltage) ON / OFF control with DC voltage APPLICATIONS Multichannel Multipoint Distribution Service (MMDS) Analog and digital transmission systems ACCESSORIES Recommended power supply unit: RSP 1500 W 27 Recommended heat sink: SK 320-240 1) Recommended fan: 3 pieces FAN 80x80 HP 24 V 1) We explicit point out that the recommended combination of heat sink and fan is not dimensioned for constant full output power of the power amplifier. The duty-cycle should not exceed 50% (1min transmitting / 1min receiving (WSJT)). Heat sinks with higher heat dissipation as well as fans with higher air flow for the recommended heat sinks are currently not available at Kuhne Electronic.
1) Dimensioned for 25 C ambient temperature
Type
Frequency range Input power Output power Small signal gain Saturation power IM3 @ 100 W PEP Input return loss (S11) Spurious and harmonic rejection VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 23400 CU
2300...2400 MHz typ. 1.2 W, max. 3 W 400 W min. 28 dB min. 450 W - 30 dBc typ. 10 dB 35 dB @ 400 W max. 1.8 : 1 +55 C +28 V max. 50 A typ. 6.5 A SMA-female, 50 ohms N-female, 50 ohms milled copper, silver-plated 190 x 152 x 38.5 typ. 4500 g
55
http://www.kuhne-electronic.de
2010/2011
Type
Frequency range Insertion loss Isolation Input power Output power Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU DIV 2300-1-SMA
2300 ... 2330 MHz typ. 3.1 dB typ. 25 dB, min. 20 dB 2 x 25 W 50 W SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 82 x 89 x 18 typ. 215 g
KU DIV 2300-1-N
2300 ... 2330 MHz typ. 3.1 dB typ. 25 dB, min. 20 dB 2 x 300 W 600 W N-female, 50 ohms N-female, 50 ohms milled aluminium 82 x 89 x 18 typ. 270 g
KU DIV 2300-1-7/16
2300 ... 2330 MHz typ. 3.1 dB typ. 25 dB, min. 20 dB 2 x 600 W 1200 W N-female, 50 ohms N-female, 50 ohms milled aluminium 82 x 89 x 18 typ. 415 g
56
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifier for 3200...4000 MHz
FEATURES GaAs FET technology High linearity Overvoltage protection and reverse polarity protection Monitor output for forward power detection
APPLICATIONS Digital broadcast systems (DVB-S, DVB-T) COFDM systems using modulation types QPSK, QAM Analog transmission systems OPTIONS Amplifier mounted on heat sink ACCESSORIES Recommended heat sink: SK 120-75
1)
APPLICATIONS Digital broadcast systems (DAB, DVB) Analog and digital transmission systems With reduced power suitable for DATV (digital amateur television) OPTIONS Amplifier mounted on heat sink ACCESSORIES Recommended heat sink: SK 120-75
1) Dimensioned for 25 C ambient temperature 1)
Type
Frequency range Input power Ouput power P1dB Saturation power Ouput power COFDM Gain Gain flatness IM3 @ 1 W PEP Input return loss (S11) Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 3240 TX
3200 ... 4000 MHz 5 mW 3.3 W 3.7 W 0.6 W min. 27 dB typ. +/- 1 dB typ. -32 dBc min. 12 dB +55 C +12 ... 14 V DC typ. 1.7 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 50 x 30 x 17 typ. 150 g
Type
Frequency range Input power Ouput power Saturation power Output power COFDM Gain Gain flatness Output IP3 Harmonic rejection Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 3337 TX
3300 ... 3700 MHz typ. 5 mW (max. 30 mW) typ. 1.6 W typ. 2 W 200 ... 500 mW typ. 26 dB typ. +/- 1 dB typ. 40 dBm typ. 25 dB +55 C +11 ... 14 V DC typ. 1 A typ. 900 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 150 g
57
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifier for 3400...3500 MHz
FEATURES High linearity (class A operation) Reverse polarity protection Milled aluminium case Small mechanical dimensions Type
Frequency range Input power Ouput power Saturation power Gain Gain flatness Harmonic rejection Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 3401 A
3400 ... 3500 MHz typ. 50 mW (max. 100 mW) typ. 0.9 W typ. 1.1 W typ. 14 dB typ. +/- 1 dB typ. 30 dB +55 C +12 ... 14 V DC typ. 0.3 A typ. 0.3 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 50 x 30 x 17 typ. 45 g
APPLICATIONS Mobile communication COFDM systems with modulation QPSK, QAM Analog transmission systems Measurement and laboratory equipment
OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: SP 150 W 12 Recommended heat sink: SK 150-62 1) Recommended fan: FAN 60x60 12 V 1)
1) Dimensioned for 25 C ambient temperature
58
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifier for 3400...3600 MHz
FEATURES LD-MOSFET-technology High voltage and reverse polarity protection Monitor output for forward power detection (DC voltage) Milled aluminium case
APPLICATIONS WIMAX radio systems COFDM systems with modulation QPSK, QAM Analog transmission systems OPTIONS Other frequencies on request Amplifier mounted on heat sink ACCESSORIES Recommended power supply unit: SP 150 W 27 Recommended heat sink: SK 150 - 62 1) Recommended fans: FAN 60x60 24 V 1)
1) Dimensioned for 25 C ambient temperature
Type
Frequency range Maximum input power Input power for P1dB Output power P1dB Saturation power Output power COFDM 1) Gain Gain flatness Monitor output Efficiency Harmonic rejection Intermodulation distortions IM3 IM3 Supply voltage ON voltage Max. load VSWR Maximum case temperature Quiescent current Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight 1) measured with QAM64/8MSps
MKU PA 3410 A
3400 ... 3600 MHz typ. 200 mW typ. 9 W (CW) typ. 14 W (CW) typ. 2 W typ. 18 dB typ. +/- 0.5 dB DC voltage, uncalibrated min. 37% @ P1dB min. 37 dB @ 10 W typ. 41 dBc @ 2 W PEP typ. 31 dBc @ 5 W PEP +28 V DC +9 ... 14 V DC 1.8:1 +55 C typ. 160 mA max. 1.4 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 59 x 20 typ. 140 g
MKU PA 3430 A
3400 ... 3600 MHz typ. 500 mW
min. 30 W (CW) typ. 9 W min. 24 dB typ. +/- 0.7 dB DC voltage, uncalibrated min. 30% @ 30 W min. 30 dB @ 30 W typ. -40 dBc @ 10 W PEP +28 V DC +9 ... 14 V DC 1.8:1 +55 C typ. 380 mA max. 3.8 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 59 x 20 typ. 140 g
59
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Linear Power Amplifiers for 3400...3600 MHz
FEATURES GaAs FET technology High linearity (class A operation) Good harmonic rejection Isolator for protection against high VSWR Overvoltage protection and reverse polarity protection Monitor outputs for foward and reverse power detection (DC voltage) Adjustable ALC (automatic level control) ON / OFF control with DC voltage (ON at 5 ... 14 V DC)
APPLICATIONS Digital broadcast systems (DVB, DMB) COFDM systems using modulation types QPSK, QAM Analog transmission systems With reduced power suitable for DATV (digital amateur television)
OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES (KU PA 3436 AL) (KU PA 3436 B) SK 300-62 1) FAN 60x60 12 V S 150 W 12
1)
Recommended heat sink: SK 200-80 1) Recommended fan: FAN 80x80 12 V 1) Recommended power supply:
BLOCK DIAGRAM
Type
Frequency range Input power Output power CW Saturation power Output power COFDM Gain Gain flatness (ALC off) Gain flatness (ALC on) Harmonic rejection ON voltage VSWR protection Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 3436 AL
3400 ... 3600 MHz 0.5 mW (max. 10 mW) typ. 4 W typ. 5 W 0.4 ... 1.0 W typ. 46 dB +/- 2.5 dB +/- 0.5 dB min. 50 dB +5 ... 14 V DC (ON) isolator +55 C +11...14 V DC typ. 1.8 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 158 x 59 x 20 typ. 310 g
KU PA 3436 B
3400 ... 3600 MHz 0.2 mW (max. 10 mW) min. 18 W min. 20 W 2... 4 W typ. 48 dB +/- 2.5 dB +/- 0.5 dB min. 40 dB +5 ... 14 V DC (ON) isolator +55 C +12 ... 14 V DC typ. 5.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 158 x 59 x 20 typ. 320 g
60
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 3370 ... 3430 MHz
FEATURES Detector output (DC voltage) for monitoring forward output power Overvoltage protection and reverse polarity protection Milled aluminium case APPLICATIONS Analog and digital transmission systems OPTIONS Other frequencies on request Amplifier mounted on heat sink ACCESSORIES (KU PA 342 AXL) Recommended heat sink: SK 120 - 75 ACCESSORIES (KU PA 342 XL) Recommended heat sink: SK 120 - 75
1) Dimensioned for 25 C ambient temperature 1) 1)
Type
Frequency range Input power Output power Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 341 A
3370 ... 3430 MHz 250 mW typ. 4 W +12 ... 14 V DC typ. 1.2 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 76 x 40 x 22 typ. 110 g
MKU PA 342 XL
3370 ... 3430 MHz typ. 100 mW min. 12 W +12 ... 14 V DC typ. 3 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 130 x 60 x 20 typ. 250 g
61
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 3370 ... 3430 MHz
FEATURES Detector output (DC voltage) for monitoring forward output power Overvoltage protection and reverse polarity protection APPLICATIONS Analog and digital transmission systems OPTIONS Other frequencies on request Amplifier mounted on heat sink with fans ACCESSORIES (KU PA 342 XLB) Recommended heat sink: SK 150 - 62 1) Recommended fans: FAN 60x60 12 V 1) ACCESSORIES (KU PA 343 HXL-2) Recommended heat sink: SK 200 - 125 1) Recommended fans: 2 pieces FAN 60x60 12 V
1) Dimensioned for 25 C ambient temperature 1)
Type
Frequency range Input power Output power Overheat protection Supply voltage Current consumption Harmonic rejection Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 34120 A
3370 ... 3430 MHz typ. 0.5 ... 1 W min. 120 W yes +13 ... 14 V DC typ. 34 A SMA-female, 50 ohms N-female, 50 ohms milled copper 168 x 116 x 20 typ. 1750 g
62
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 3400 ... 3460 MHz
FEATURES for MKU PA 3440 A / MKU PA 34100 A High voltage and reverse polarity protection Monitor output for forward power detection (DC voltage) Milled aluminium case APPLICATIONS Analog and digital transmission systems OPTIONS Other frequencies on request Amplifier mounted on heat sink with fans ACCESSORIES (MKU PA 3440 A) Recommended power supply unit: SP 150 W 27 Recommended heat sink: SK 200 - 80 1) Recommended fans: FAN 80x80 24 V 1) ACCESSORIES (MKU PA 34100 A) Recommended power supply unit: SP 320 W 27 Recommended heat sink: SK 200 - 80 1) Recommended fans: 1 pieces FAN 80x80HP 24 V
APPLICATIONS Analog and digital transmission systems OPTIONS Other frequencies on request Amplifier mounted on heat sink with fans ACCESSORIES Recommended Recommended Recommended Recommended power supply unit: RSP 1500-27 heat sink: SK 320 - 240 1) Heat-Conductive Paste: Arctic Silver 5 fans: 3 pieces FAN 80x80HP 24 V 1)
1)
Type
Frequency range Input power Output power P1 dB Output power COFDM Saturation output power Small signal gain Gain flatness Harmonic rejection IM3 Efficiency Input VSWR VSWR of load Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 3440 A
3400 ... 3460 MHz max. 2 W typ. 28 W (CW) typ. 13 W typ. 40 W (CW) min. 13 dB, typ. 14 dB max. +/- 0.3 dB 47 dB @ 40 W min. -37 dBc @ 45 W PEP typ. 31 % @ 40 W (CW) min. 10 dB 1.8 : 1 + 55C + 28 V typ. 5 A @ 40 W typ. 450 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 130 x 60 x 20 typ. 255 g
MKU PA 34100 A
3400 ... 3460 MHz typ. 8 W, max. 12 W min. 75 W (CW) typ. 25 W typ. 100 W (CW) min. 10 dB max. +/- 0.3 dB typ. 27 dB @ 100 W -40 dBc @ 40 W PEP typ. 40 % @ 100 W (CW) min. 10 dB 1.8 : 1 + 55C + 28 V max. 10 A typ. 1.0 A SMA-female, 50 ohms N-female, 50 ohms milled aluminium 130 x 60 x 20 typ. 255 g
MKU PA 34350 CU
3400 ... 3460 MHz typ. 1.0 W, max. 1.2 W min. 300 W (CW) min. 350 W (CW), typ. 370 W (CW) min. 28 dB typ. +/- 0.4 dB typ. 40 dB @ 350 W - 40 dBc @ 100 W PEP typ. 34 % @ 350 W (CW) typ. 10 dB 1.8 : 1 + 55C + 28 V max. 42 A typ. 4.5 A SMA-female, 50 ohms N-female, 50 ohms milled cooper, silver-plated 190 x 152 x 38.5 typ. 4800 g
63
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifier for 3400...5000 MHz
FEATURES High linearity Overvoltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage) APPLICATIONS Analog and digital transmission systems Measurement and laboratory equipment OPTIONS Amplifier mounted on heat sink APPLICATIONS Recommended heat sink: SK 120 - 75 BLOCK DIAGRAM
1)
KU PA 3450 MM
3400 ... 5000 MHz max. 20 dBm typ. 33 dBm (3500 ... 4600 MHz) min. 31 dBm typ. 36 dBm (3500 ... 4600 MHz) min. 33 dBm typ. 24 dB +/- 2 dB min. 30 dB typ. -41 dBc typ. -36 dBc max. 1.8 : 1 +55 C +12 ... 14 V DC max. 1.8 A typ. 1.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 150 g
64
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifier for 4400...5000 MHz
FEATURES GaAs FET technology High linearity (class A operation) Overheat protection Overvoltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage)
APPLICATIONS Analog and digital transmission systems Measurement and laboratory equipment OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 200 125 1) Recommended fan: 2 pieces FAN 60x60 12V 1)
1) Dimensioned for 25 C ambient temperature
APPLICATIONS Analog and digital transmission systems Measurement and laboratory equipment OPTIONS Amplifier mounted on heat sink with fans ACCESSORIES Recommended heat sink: SK 150 - 62 1) Recommended fan: FAN 60x60 12 V 1)
KU PA 4450 - 8 B
4400 ... 5000 MHz max. 10 mW typ. 7 W, min. 6 W typ. 10 W, min. 9 W 1 ... 2 W typ. 36 dB +/- 2 dB min. 45 dB @ P1dB typ. -52 dBc, max. -47 dBc typ. -43 dBc, max. -40 dBc
typ. -40 dBc min. 7 dB max. 1.8 : 1 +55 C +12 ... 14 V DC max. 12 A typ. 8 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 156 x 64 x 22 typ. 380 g
65
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Linear Power Amplifiers for 5740...5780 MHz
FEATURES GaAs FET technology High linearity (class A operation) Detector output (DC voltage) for monitoring forward output power Overvoltage protection and reverse polarity protection Milled aluminium case
APPLICATIONS Analog and digital transmission systems OPTIONS Other frequencies on request
Type
Frequency range Input power Output power Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 601
5740 ... 5780 MHz 600 mW min. 4 W +12 ... 14 V DC typ. 1.2 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 55 x 22 typ. 160 g
MKU PA 602
5740 ... 5780 MHz max. 100 mW min. 4 W + 12 ... 14 V DC typ. 1.4 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 55 x 22 typ. 160 g
66
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 5740...5780 MHz
FEATURES GaAs FET technology High linearity (class A operation) Detector output (DC voltage) for monitoring forward output power Overvoltage protection and reverse polarity protection Milled aluminium case
APPLICATIONS Analog and digital transmission systems OPTIONS Other frequencies on request Amplifier mounted on heat sink with fans
Type
Frequency range Input power Output power Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 602 H
5740 ... 5780 MHz typ. 200 mW min. 8 W +12 ... 14 V DC max. 2.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 55 x 22 typ. 160 g
MKU PA 602 XH
5740 ... 5780 MHz typ. 300 mW min. 15 W +12 ... 14 V DC typ. 6 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 55 x 22 typ. 180 g
Type
Center frequency Input power Output power ON voltage Maximum case temperature Temperature protection Supply voltage Current consumption Input connector, impedance Output connector, impedance Dimensions (mm) Case Weight
MKU PA 5750 A
5740 ... 5780 MHz max. 200 mW typ. 50 W + 12 V (ON) +55 C Yes +12 V DC typ. 13 A SMA-female, 50 ohms SMA-female, 50 ohms 158 x 64 x 22 milled aluminium typ. 390 g
67
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
High Power Amplifier for 5740...5780 MHz
FEATURES GaAs FET technology High linearity (class A operation) Detector output (DC voltage) for monitoring forward output power Overvoltage protection and reverse polarity protection Overheat protection ON / OFF control with DC voltage APPLICATIONS Analog and digital transmission systems Options Other frequencies on request! Amplifier mounted on heat sink with fans ACCESSORIES Recommended power supply unit: SP 500 W 12 Recommended heat sink: SK 200-125 1) Recommended fans: 2 pieces FAN 60x60 HP 12 V
1) Dimensioned for 25 C ambient temperature
1)
Type
Frequency range Input power Output power ON voltage Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 57100 A
5740 ... 5780 MHz typ. 200 mW; max. 350 mW typ. 100 W +5 ... 14 V DC (ON) +55 C +12 V DC typ. 28 A SMA-female, 50 ohms N-female, 50 ohms milled aluminium 158 x 64 x 22 typ. 380 g
68
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifier for 5300 ... 5900 MHz
FEATURES GaAs FET technology High linearity Low EVM Isolator for protection against high VSWR Adjustable ALC (automatic level control) Over voltage protection and reverse polarity protection Over temperature protection Monitor outputs for forward and reverse power detection (DC voltage) Logic ON / OFF control (ON at +5 14 V DC)
APPLICATIONS Digital transmission and broadcast systems (DVB, WiMAX) COFDM systems using QPSK, QAM Analog transmission systems OPTIONS Other frequencies on request! Amplifier mounted on heat sink with fans ACCESSORIES (KU PA 5358 AL) Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 200 - 80 1) Recommended fans: FAN 80x80 12 V 1) ACCESSORIES (KU PA 5359) Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 200 - 80 1) Recommended fans: FAN 80x80 12 V 1)
*) Two-tone test, f = 1 MHz, Pout = 500 mW (single carrier level) **) Two-tone test, f = 1 MHz, Pout = 1 W (single carrier level) 1) Dimensioned for 25 C ambient temperature
Type
Frequency range Input power Output power P1dB Saturation power Gain Harmonic rejection IM3 @ 2 W PEP IM3 @ 4 W PEP ON voltage VSWR protection Maximum case temperature Supply voltage Current consumption Quiescent current Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 5358 AL
5300 ... 5800 MHz typ. 2 mW, max. 5 mW typ. 3.5 W min. 4 W typ. 34 dB min. 60 dB
KU PA 5359 A
5300 ... 5900 MHz typ. 5 mW, max. 10 mW typ. 9 W min. 10 W typ. 35 dB min. 60 dB typ. -43 dBc *) typ. -38 dBc **)
+5 ... 14 V DC (ON) isolator +55 C +12 ... 14 V DC max. 2.5 A typ. 2.1 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 158 x 59 x 20 typ. 320 g
+5 ... 14 V DC (ON) isolator +55 C +12 ... 14 V DC max. 4.5 A typ. 4 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 158 x 59 x 20 typ. 320 g
69
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifier for 5000...6000 MHz
FEATURES Overvoltage protection and reverse polarity protection Detector output (DC voltage) for monitoring forward output power Small mechanical dimensions Milled aluminium case APPLICATIONS Analog and digital transmission systems Driver amplifier Low power appliciations Type
Frequency range Input power Ouput power CW Saturation power Output power COFDM Gain Gain flatness Harmonic rejection Output IP3 Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 5060 TX
5000 ... 6000 MHz 8 mW (max. 30 mW) 800 mW typ. 1.1 W 100 ... 250 mW typ. 21 dB typ. +/-2 dB typ. 30 dB typ. +37 dBm +55 C +10 ... 14 V DC typ. 530 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 50 x 30 x 22 typ. 70 g
Type
Frequency range Input power Output power P1dB Saturation output power Small signal gain Harmonic rejection Input return loss (S11) VSWR of load Maximum case temperature Supply voltage Current consumption Input connector, impedance Input connector, impedance Case Dimensions (mm) Weight
KU PA 6834 TX
6734 ... 6934 MHz typ. 10 mW, max. 15 mW typ. 900 mW min. 1 W typ. 20 dB typ. 30 dB @ 0.5 W output power typ. 20 dB max. 1.8 : 1 +55 C +12 ... 15 V DC typ. 820 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 150 g
KU PA 8183 TX
8100 ... 8300 MHz typ. 10 mW, max. 15 mW typ. 800 mW min. 900 mW typ. 19 dB typ. 30 dB @ 0.5 W output power typ. 20 dB max. 1.8 : 1 +55 C +12 ... 15 V DC typ. 820 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 150 g
70
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifier for 6790 ... 6810 MHz
FEATURES GaAs FET technology High linearity (class A operation) Reverse polarity protection Monitor output for forward power detection (DC voltage) Type
Frequency range Input power Output power P1dB Gain Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 6800 TR
6790 ... 6810 MHz typ. 10 mW (max. 30 mW) typ. 500 mW typ. 17 dB +12 14 V DC max. 350 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 73 x 30 x 20 typ. 70 g
APPLICATIONS Suitable as driver amplifier for KU PA 6800 C Low power applications Measurement and laboratory equipment Options Other frequencies on request!
APPLICATIONS Measurement and laboratory equipment Options Other frequencies on request! Amplifier mounted on heat sink with fans ACCESSORIES Recommended heat sink: Recommended fans: FAN (KU PA 6800 A) SK 200 - 80 1) 80x80 12 V 1) (KU PA 6800 B) SK 150 - 62 1) 60x60 12 V 1) (KU PA 6800 C) SK 150 - 62 1) 60x60 12 V 1)
Type
Frequency range Input power Output power P1dB Gain Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 6800 A
6790 ... 6810 MHz typ. 10 mW typ. 8 W typ. 29 dB +12 14 V DC typ. 3 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 170 x 59 x 20 typ. 350 g
KU PA 6800 B
6790 ... 6810 MHz typ. 200 mW typ. 8 W typ. 16 dB +12 14 V DC typ. 3 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 130 x 59 x 20 typ. 250 g
KU PA 6800 C
6790 ... 6810 MHz typ. 400 mW typ. 15 W typ. 16 dB +12 14 V DC typ. 6.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 130 x 59 x 20 typ. 250 g
71
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 9190...9210 MHz
FEATURES GaAs FET technology High linearity (class A operation) Detector output (DC voltage) for monitoring forward output power Overvoltage protection and reverse polarity protection Small mechanical dimensions
APPLICATIONS Measurement and laboratory equipment Analog and digital transmission systems Options Other frequencies on request! Amplifier mounted on heat sink with fans ACCESSORIES (KU PA 092 XLC) Recommended heat sink: SK 200 - 80 1) Recommended fans: FAN 80x80 12 V 1)
1) Dimensioned for 25 C ambient temperature
Type
Frequency range Input power Output power Saturation power Gain Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU PA 092 X
9190 ... 9210 MHz typ. 200 mW typ. 4 W typ. 5 W typ. 13 dB +55 C +12 ... 14 V DC typ. 2 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 70 x 45 x 22 typ. 130 g
KU PA 092 XLC
9190 ... 9210 MHz typ. 200 mW typ. 15 W typ. 20 W typ. 18 dB +55 C +12 ... 14 V DC typ. 8 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 178 x 59 x 20 typ. 380 g
72
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Linear Power Amplifiers for 10340...10390 MHz
FEATURES Detector output (DC voltage) for monitoring forward output power Overvoltage protection and reverse polarity protection Small mechanical dimensions APPLICATIONS Analog and digital transmission systems Options Other frequencies on request!
Type
Frequency range Input power Output power Saturation power Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 101 N
10340 ... 10390 MHz typ. 200 mW min. 1 W typ. 1.3 W +12 ... 14 V DC typ. 450 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 60 x 30 x 20 typ. 70 g
MKU PA 101 H
10340 ... 10390 MHz typ. 230 mW min. 2 W typ. 2.4 W +12 ... 14 V DC typ. 800 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 60 x 30 x 20 typ. 70 g
Type
Frequency range Input power Output power Saturation power Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 102 C
10340 ... 10390 MHz typ. 50 mW min. 1 W typ. 1.3 W +12...14 V DC typ. 500 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 76 x 30 x 17 typ. 70 g
MKU PA 102 AL
10340 ... 10390 MHz max. 10 mW min. 200 mW min. 250 mW +12...14 V DC typ. 250 mA SMA-female, 50 ohms SMA-female, 50 ohms German silver 75 x 30 x 38 typ. 80 g
73
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Linear Power Amplifiers for 10250...10450 MHz
FEATURES GaAs FET technology High linearity (class A operation) Detector output (DC voltage) for monitoring forward output power Overvoltage protection and reverse polarity protection Small mechanical dimensions ACCESSORIES (KU PA 101 XL) Recommended heat sink: SK 150 - 62 1) Recommended fans: FAN 60x60 12 V 1) ACCESSORIES (KU PA 102 XL) Recommended heat sink: SK 150 - 62 1) Recommended fans: FAN 60x60 12 V 1)
1) Dimensioned for 25 C ambient temperature
APPLICATIONS Analog and digital transmission systems Options Other frequencies on request! Amplifier mounted on heat sink with fans ACCESSORIES (KU PA 101 X) Recommended heat sink: SK 120 - 75
1)
Type
Frequency range Input power Output power CW Saturation power Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 101 X
10250 ... 10450 MHz typ. 800 mW min. 4 W typ. 5 W +55 C +12 ... 14 V DC typ. 1.8 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 150 g
MKU PA 101 XL
10250 ... 10450 MHz 1.5 ... 2.0 W min. 8 W typ. 10 W +55 C +12 ... 14 V DC max. 4 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 150 g
Type
Frequency range Input power Output power CW Saturation power Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 102 X
10280 ... 10450 MHz typ. 200 mW min. 4 W typ. 5 W +55 C +12 ... 14 V DC typ. 2 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 70 x 45 x 22 typ. 120 g
MKU PA 102 XL
10250 ... 10450 MHz typ. 200 mW min. 10 W typ. 10 W +55 C +12 ... 14 V DC typ. 4 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 130 x 60 x 20 typ. 250 g
74
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Linear High Power Amplifiers for 10300...10400 MHz
FEATURES GaAs FET technology High linearity (class A operation) Detector output (DC voltage) for monitoring forward output power Overvoltage protection and reverse polarity protection ON / OFF control with DC voltage Small mechanical dimensions
APPLICATIONS Analog and digital transmission systems Options Other frequencies on request! Amplifier mounted on heat sink with fans ACCESSORIES (KU PA 103 XLC) Recommended heat sink: SK 200 - 80 1) Recommended fans: FAN 80x80 12 V 1) ACCESSORIES (MKU PA 1025 A) Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 200-80 1) Recommended fan: FAN 80x80 12 V 1) ACCESSORIES (MKU PA 1050 A) Recommended heat sink: SK 200-125 1) Recommended fan: 2 pieces FAN 60x60 HP 12 V
1) Dimensioned for 25 C ambient temperature 1)
Type
Frequency range Input power Output power Saturation power Overheat protection Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 1025 A
10300 ... 10400 MHz typ. 200 mW typ. 25 W min. 25 W yes + 55 C +12 ... 14 V DC typ. 8 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 158 x 64 x 22 typ. 380 g
MKU PA 1050 A
10300 ... 10400 MHz max. 200 mW typ. 45 W typ.. 50 W yes + 55 C +12 ... 14 V DC typ. 20 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 158 x 64 x 22 typ. 400 g
75
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifiers for 8500...12500 MHz
FEATURES GaAs FET technology High linearity (class A operation) Good harmonic rejection High bandwidth Overvoltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage) Small mechanical dimensions APPLICATIONS Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK, QAM Analog transmission systems Options Amplifier mounted on heat sink ACCESSORIES Recommended heat sink: SK 120 - 75
1) Dimensioned for 25 C ambient temperature 1)
APPLICATIONS Digital broadcast systems (DVB-S, DVB-T) COFDM systems using modulation types QPSK, QAM Analog transmission systems
Type
Type
Frequency range Input power Output power P1dB
KU PA 0913-2A KU PA 1215-2A
KU PA 0913-2A: 9500 ... 13300 MHz KU PA 1215-2A: 12700...15400 MHz 15 mW, max. 100 mW KU PA 0913-2A: min. 2.2 W (9500 ... 12800 MHz) min. 1.2 W (12800 ... 13300 MHz) KU PA 1215-2A: 2.0 W KU PA 0913-2A: typ. 2.7 W (9500 ... 12800 MHz) typ. 1.6 W (12800 ... 13300 MHz) KU PA 1215-2A: typ. 2.5 W 0.4 W min. 22 dB typ. 40 dB KU PA 0913-2A: typ. -30 dBc KU PA 1215-2A: typ. -27 dBc +55 C +12 ... 14 V DC KU PA 0913-2A: typ. 1.5 A KU PA 1215-2A: typ. 1.6 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 50 x 30 x 18 typ. 45 g
Frequency range
Input power Output power P1dB Saturation power Gain Gain flatness Harmonic rejection IM3 @ 120 mW PEP IM3 @ 600 mW PEP Input return loss (S11) VSWR of load Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
Saturation power
Output power COFDM Gain Harmonic rejection IM3 @ 1 W PEP Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
76
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Power Amplifier for 14000...14500 MHz
FEATURES High linearity (class-A operation) High bandwidth Overvoltage protection and reverse polarity protection Monitor output for forward power detection (DC voltage) Small mechanical dimensions
APPLICATIONS Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK, QAM Analog transmission systems
KU PA 142 AVS
14000 ... 14500 MHz typ. 200 mW min. 3 W
KU PA 14005 A-3
14000 ... 14500 MHz max. 20 mW (13 dBm) typ. 6 W
77
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
Linear Power Amplifier for 24000...24250 MHz
FEATURES High linearity (class A operation) Reverse polarity protection Milled aluminium case Small mechanical dimensions
APPLICATIONS Analog and digital transmission systems Measurement and laboratory equipment Driver amplifier Low power applications
APPLICATIONS Analog and digital transmission systems Measurement and laboratory equipment
Type
Frequency range Input power Output power Saturation power Noise figure @ 18 C Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 243 C
24000 ... 24250 MHz typ. 0.1 mW typ. 20 mW min. 30 mW typ. 4 dB +10 ... 15 V DC typ. 70 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 50 x 30 x 18 typ. 50g
78
http://www.kuhne-electronic.de
2010/2011
Power Amplifiers
High Power Amplifiers for 24000...24250 MHz
FEATURES High linearity (class A operation) Overvoltage protection and reverse polarity protection Detector output (DC voltage) for monitoring forward output power ON / OFF control with DC voltage Milled aluminium case
APPLICATIONS Measurement and laboratory equipment Analog and digital transmission systems Options Other frequencies on request! Amplifier mounted on heat sink with fans ACCESSORIES (MKU PA 2410 A) Recommended heat sink: SK 150 - 62 1) Recommended fans: 2 pieces FAN 60x60 HP 12 V ACCESSORIES (MKU PA 2410 AW) Recommended heat sink: SK 150 - 62 1) Recommended fans: 2 pieces FAN 60x60 HP 12 V
1) Dimensioned for 25 C ambient temperature 1) 1)
Type
Frequency range Input power Output power Saturation power Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU PA 2403 A
24000 ... 24250 MHz 20 mW, max. 50 mW typ. 3 W min. 3 W +10 ... 12 V DC typ. 3 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 30 x 50 x 18 typ. 60 g
MKU PA 2410 A
24000 ... 24250 MHz 20 mW, max. 50 mW typ. 10 W min. 10 W +9 ... 10 V DC typ. 15 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 119 x 63 x 22 typ. 310 g
MKU PA 2410 AW
24000 ... 24250 MHz typ. 20 mW, max. 50 mW typ. 10 W min. 10 W +9 ... 10 V DC typ. 15 A SMA-female, 50 ohms Waveguide R220 / WG20 / WR42 milled aluminium 119 x 63 x 22 typ. 330 g
79
http://www.kuhne-electronic.de
2010/2011
Circulators
To protect a power amplifier in case of bad antenna matching the use of a circulator is recommended. This item conducts the reflected power into an external terminating resistor where it is absorbed. Therefore the power amplifier is protected well because the output stage is always matched correctly.
Type
Frequency Isolation Loss VSWR Power Temperature Connectors Dimensions (mm) Weight
VAM 1081
1250 ... 1300 MHz min. 23 dB max. 0.3 dB max. 15 : 1 max. 500 W CW -20 ... +70 C 3x N-female 52 x 49 x 27 typ. 370 g
80
http://www.kuhne-electronic.de
2010/2011
If the LO frequency is lower than the frequency range from f1 to f2, the output frequency range will directly represent the input range, but shifted to a lower frequency range. This is shown in the left picture. If the LO frequency is higher than the input frequency range, the resulting output frequency range will be inverted. In that case, the original f1 is lower than f2, but in the output signal the frequency |LO-f1| is higher than |LO-f2|. This is shown in the right picture.
Proper filtering of the wanted input frequency range f1 to f2 is essential in a down converter. If an input filter is left, then the image frequency range will also be converted to the desired frequency band. The following pictures show an example with high LO frequency. The image frequency range from f3 to f4 mixed with the LO frequency results in exactly the same frequency range like the desired input range f1 to f2. That means that radio signals, for example in a receiver, at f3 may completely disturb a wanted signal at f2. Since real filters have a limited attenuation, the image rejection of a down converter is also limited.
81
http://www.kuhne-electronic.de
2010/2011
Down Converters
Down Converters for 1390 ... 1410 MHz
Type
Input frequency (RF) Output frequency (IF) Noise figure @ 18 C Gain Supply voltage Voltage supply via bias tee Direct voltage supply (solder pin) Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNC 14 CON
1390 ... 1410 MHz VHF typ. 0.6 dB min. 20 dB +12 ... 15 V DC yes yes typ. 100 mA SMA-female, 50 ohms BNC-female, 50 ohms German silver 30 x 56 x 74 typ. 110 g
KU LNC 14 CON 2
1390 ... 1410 MHz VHF typ. 0.6 dB min. 60 dB +12 ... 15 V DC yes yes typ. 100 mA SMA-female, 50 ohms BNC-female, 50 ohms German silver 30 x 56 x 74 typ. 140 g
KU LNC 15 CON
1540 ... 1560 MHz VHF typ. 0.6 dB min. 20 dB +12 ... 15 V DC yes yes typ. 100 mA N-female, 50 ohms N-female, 50 ohms German silver 30 x 56 x 74 typ. 160 g
KU LNC 17 CON
1695 ... 1710 MHz 138 ... 153 MHz typ. 0.7 dB min. 20 dB +12 ... 15 V DC yes yes typ. 100 mA SMA-female, 50 ohms BNC-female, 50 ohms 30 x 56 x 74 German silver typ. 120 g
KU LNC 17 CON 2
1695 ... 1710 MHz 138 ... 153 MHz typ. 0.7 dB min. 60 dB +12 ... 15 V DC yes yes typ. 100 mA SMA-female, 50 ohms N-female, 50 ohms 30 x 56 x 111 German silver typ. 170 g
82
http://www.kuhne-electronic.de
2010/2011
Down Converters
Down Converter for 2100...2600 MHz
FEATURES Low noise figure and high gain Remote power supply via IF connector Unconditionally stable - no parasitic oscillations in case of poor antenna match APPLICATIONS Analog and digital transmission systems Multichannel Multipoint Distribution Service (MMDS) Type
Input frequency range (RF) Output frequency range (IF) LO frequency LO frequency stability (0 ... +40 C) Gain Noise figure @ 18 C Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
Type
Input frequency range (RF) Output frequency range (IF) LO frequency Gain Noise figure @ 18 C Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNC 25 KU LNC 25 TM
2350 ... 2550 MHz 1433.5 ... 1633.5 MHz 916.5 (SAW) typ. 40 dB 0.7 dB +9 ... 18 V DC typ. 70 mA N-female, 50 ohms F-female, 75 ohms KU LNC 25: German silver KU LNC 25 TM: Water resistant KU LNC 25: 74 x 56 x 30 KU LNC 25 TM: 109 x 84 x 59 KU LNC 25: typ. 120 g KU LNC 25 TM: typ. 400 g
Type
Input frequency range (RF) Output frequency range (IF) LO frequency Gain Noise figure @ 18 C Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNC 23 KU LNC 23 TM
2320 ... 2450 MHz 1404 ... 1534 MHz 916.5 MHz SAW typ. 40 dB typ. 0.7 dB +9 ... 18 V DC typ. 70 mA N-female, 50 ohms F-female, 75 ohms MKU LNC 23: German silver MKU LNC 23 TM: Water resistant MKU LNC 23: 74 x 56 x 30 MKU LNC 23 TM: 109 x 84 x 59 KU LNC 23: typ. 120 g KU LNC 23 TM: typ. 410 g
83
http://www.kuhne-electronic.de
2010/2011
Down Converters
Broadband Down Converter for 2020...3000 MHz
FEATURES Low phase noise and high frequency stability of the internal oscillator High bandwidth Remote power supply via IF connector Overvoltage protection and reverse polarity protection Milled aluminium case, water resistant APPLICATIONS Multichannel Multipoint Distribution Services (MMDS) Digital broadcast systems (DAB, DVB) Analog and digital transmission systems Measurement and laboratory equipment Type
Input frequency range (RF) Output frequency range (IF) LO frequency LO accuracy @ 18 C LO frequency stability (0 ... +40 C) Phase noise @ 100 kHz Gain Noise figure @ 18 C Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNC BB 2030 B
2020 ... 3000 MHz 20 ... 1000 MHz 2000 MHz +/- 10 kHz +/- 10 kHz -112 dBc/Hz typ. 30 dB, min. 27 dB typ. 1.5 dB, max. 2.0 dB +9 ... 15 V DC Remote supply via IF connector typ. 260 mA N-female, 50 ohms N-female, 50 ohms milled aluminium case, water resistant 82 x 64 x 22 typ. 230 g
Type
Input frequency range (RF) Output frequency range (IF) LO frequency LO accuracy @ 18 C LO frequency stability (0 ... +40 C) Phase noise @ 1 kHz Phase noise @ 10 kHz Phase noise @ 100 kHz Gain Noise figure @ 18 C Input power Output IP3 Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
84
http://www.kuhne-electronic.de
2010/2011
Down Converters
Down Converter for 3100...3600 MHz
FEATURES Low noise figure Low phase noise oscillator High frequency stability of the oscillator High linearity Large bandwidth High image rejection Good input return loss (S11) Overvoltage protection and reverse polarity protection Solder pin for direct power supply
APPLICATIONS Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK, QAM Analog and digital transmission systems IMPORTANT NOTES In case of outdoor installation, protection against water and moisture is required
APPLICATIONS Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK, QAM Analog and digital transmission systems ACCESSORIES Mounting clamp
Type
Input frequency range (RF) Output frequency range (IF) LO frequency LO accuracy @ 18 C LO frequency stability (0 +40 C) Phase noise @ 10 kHz Phase noise @ 100 kHz LO leakage to IF port LO leakage to RF port Image rejection Noise figure @ 18 C Gain Gain flatness RF input level Input connector, impedance Output connector, impedance Supply voltage Current consumption Case Dimensions (mm) Weight
KU LNC 3136 A
3100 ... 3600 MHz 200 ... 700 MHz 2900 MHz +/- 10 kHz +/- 10 kHz typ. -90 dBc/Hz typ. -112 dBc/Hz typ. -45 dBm typ. -65 dBm typ. 55 dB typ. 2.0 dB typ. 37 dB +/- 2.0 dB max. 1 mW SMA-female, 50 ohms SMA-female, 50 ohms +9 ... 18 V DC typ. 200 mA milled aluminium 126 x 64 x 22 typ. 310 g
KU LNC 3436 A
3400 3560 MHz (3600 MHz)* 400 560 MHz (600 MHz)* 3000 MHz +/- 20 kHz +/- 20 kHz -112 dBc/Hz typ. -58 dBm typ. -52 dBm typ. 47 dB typ. 1 dB typ. 44 dB +/- 1.5 dB max. 1 mW N-female, 50 ohms N-female, 50 ohms +9 ... 18 V DC typ. 180 mA milled aluminium case, water resistant 82 x 64 x 22 typ. 240 g * -6 dB gain max.
85
http://www.kuhne-electronic.de
2010/2011
Down Converters
Down Converter for 5150...5900 MHz
FEATURES Low noise figure High gain High frequency stability of the oscillator Low phase noise oscillator Overvoltage protection and reverse polarity protection Remote power supply via output connector
APPLICATIONS Digital broadcast systems (DVB-T, DVB-S) Analog and digital transmission systems
Type
Input frequency (RF) Output frequency (IF) LO frequency LO accuracy @ 18C LO frequency stability (0 +40 C) Phase noise @ 1 kHz Phase noise @ 10 kHz Phase noise @ 100 kHz RF input power Noise figure @ 18 C Gain Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
typ. -100 dBc/Hz max. 1 mW typ. 1.0 dB, max. 1.3 dB typ. 40 dB, min. 38 dB +9 ... 18 V DC, supply via IF connector (remote power supply) typ. 180 mA N-female, 50 ohms F-female, 75 ohms German silver 74 x 56 x 30 typ. 120 g
typ. -100 dBc/Hz max. 1 mW typ. 1.1 dB, max. 1.3 dB min. 35 dB +9 ... 18 V DC, supply via IF connector (remote power supply) typ. 220 mA N-female, 50 ohms N-female, 50 ohms Milled aluminium case, water resistant 82 x 64 x 22 typ. 240 g
typ. -98 dBc/Hz max. 1 mW typ. 1.0 dB, max. 1.3 dB typ. 40 dB, min. 38 dB +9 ... 18 V DC, supply via IF connector (remote power supply) typ. 180 mA N-female, 50 ohms N-female, 50 ohms Milled aluminium case, water resistant 82 x 64 x 22 typ. 240 g
Type
Input frequency (RF) Output frequency (IF) LO accuracy @ 18C LO frequency stability (0 +40 C) Noise Figure @ 18 C Gain Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU LNC 6772 A
6700 ... 7200 MHz 300 ... 800 MHz 6400 MHz +/- 20 kHz +/- 40 kHz typ. 1.5 dB, max. 2.0 dB min. 38 dB +9 ... 18 V DC typ. 160 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 82 x 64 x 22 typ. 210 g
86
http://www.kuhne-electronic.de
2010/2011
Down Converters
Down Converter for 8000...8450 MHz
FEATURES Low noise figure Large bandwidth Low phase noise oscillator High frequency stability of the oscillator High linearity Over voltage protection and reverse polarity protection Remote power supply via output connector Solder pin for direct power supply, this pin can also be used to supply an external preamplifier via the remote power supply feature of the converter Input for 10 MHz reference frequency via output connector Automatic activation of PLL if external 10 MHz signal is supplied APPLICATIONS Deep space communications ACCESSORIES Bias Tee / Diplexer KU BT 3000 DIP Bias Tee KU BT 271 N Bias Tee KU BT 3000 N Preamplifier KU LNA 8000 A BLOCK DIAGRAM
87
http://www.kuhne-electronic.de
2010/2011
Down Converters
Type
Input frequency range (RF) LO frequency Noise figure @ 18 C Gain Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU LNC 24 A
24.00 ... 24.25 GHz 23 GHz (SHM 11.5 GHz) max. 2.5 dB min. 45 dB +12 ... 18 V max. 150 mA R 220 / WG 20 / WR 42 F-female, 75 ohms milled aluminium 128 x 35 x 20 typ. 130 g
Type
Input frequency range (RF) Output frequency range (IF) LO frequency LO accuracy @ 18 C LO frequency stability (0 +40 C) Phase noise @ 100 kHz Noise figure @ 18 C Gain RF input level Input connector, impedance Output connector, impedance Supply voltage Current consumption Case Dimensions (mm) Weight
KU LNC 107 A
10000 ... 10700 MHz 1400 ... 2100 MHz 8600 MHz +/- 20 kHz +/- 20 kHz typ. -105 dBc/Hz typ. 1.3 dB, max. 1.5 dB typ. 36 dB max. 1 mW SMA-female, 50 ohms SMA-female, 50 ohms +9 ... 18 V DC typ. 400 mA Water resistant milled aluminium case 82 x 64 x 33 typ. 240 g
APPLICATIONS Digital broadcast systems (DVB-T, DVB-S) COFDM systems using modulation types QPSK, QAM Analog and digital transmission systems
81
88
http://www.kuhne-electronic.de
2010/2011
Up Converters
Modern communication systems often use microwave frequencies around 2.4 GHz, 5.6 GHz and higher. So there is a need for up converters, which convert low frequency ranges like UHF up to the microwaves. Kuhne electronic offers up converters for several microwave bands. Typical applications are radio links, digital broadcast and multichannel multipoint distribution service (MMDS). Microwave up converters from Kuhne electronic are designed for analog and digital transmission systems. Normally, they are used as transmit converters.
Basics of up converters Up converters have a low input frequency range and a high output frequency range. The conversion is realized by mixing the input frequency range with a fixed frequency, the Local Oscillator (LO) frequency. The LO signal can either be supplied from an external source or it is provided by an internal oscillator, depending on the up converter hardware.
When the input signal between f1 and f2 is mixed (multiplied) with the LO signal, the result will be two signals which are located on the left and right of the LO signal. An input signal at the frequency f1 will cause output signals at the frequencies |LO f1|. An input signal at the frequency f2 will cause output signals at the frequencies |LO f2|. Thus, the upper signal (range) directly represents the input range from f1 to f2, but shifted to a higher frequency range. The lower signal (range) on the left of the LO signal also represents the input range, but the frequency range is inverted. This is shown in the picture below.
Depending on the application, only one of the resulting frequency bands (the upper or the lower one) is needed. The desired frequency band must be selected by a filter. Ideally, this filter would completely erase the unwanted band and the LO signal. In reality, a filter will only have a limited attenuation. This results in a limited image rejection and LO rejection at the output of an up converter.
89
http://www.kuhne-electronic.de
2010/2011
Up Converters
Up Converters for 2100...2700 MHz
FEATURES Low phase noise oscillator High frequency stability of the oscillator High linearity Overvoltage protection and reverse polarity protection
APPLICATIONS Digital broadcast systems (DVB-T, DVB-S) Analog and digital transmission systems Multichannel Multipoint Distribution Service (MMDS) BLOCK DIAGRAM
Block diagram for KU UP 2123 A and KU UP 2325 A Block diagram for KU UP 2527 A
KU UP 2123 A
540 ... 740 MHz 2100 ... 2300 MHz 1560 MHz typ. 17 dB, min. 15 dB max. 5 mW (+7 dBm) typ. 50 mW (+17 dBm) +/- 2 ppm +/- 3 ppm typ. -98 dBc/Hz typ. -107 dBc/Hz typ. -116 dBc/Hz
KU UP 2325 A
597 ... 797 MHz 2300 ... 2500 MHz 1703 MHz typ. 17 dB, min. 15 dB max. 5 mW (+7 dBm) typ. 50 mW (+17 dBm) +/- 2 ppm +/- 3 ppm typ. -95 dBc/Hz typ. -98 dBc/Hz typ. -110 dBc/Hz
KU UP 2527 A
662 ... 862 MHz 2500 ... 2700 MHz 1838 MHz 16 dB min. 100 mW / 20 dBm
typ. -120 dBc/Hz typ. 60 dB +12 V DC 230 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 82 x 64 x 22 typ. 210 g
90
http://www.kuhne-electronic.de
2010/2011
Up Converters
Up Converters for 3400...5900 MHz
FEATURES Low phase noise oscillator High frequency stability of the oscillator High linearity Overvoltage protection and reverse polarity protection
APPLICATIONS Digital broadcast systems (DVB-T, DVB-S) Analog and digital transmission systems BLOCK DIAGRAM
Block diagram for KU UP 3436 A Block diagram for KU UP 5457 A and KU UP 5659 A
KU UP 3436 A
400 ... 600 MHz 3400 ... 3600 MHz 3000 MHz 23 dB (+/- 2 dB) typ. -10 dBm (max. 3 dBm) min. 13 dBm (20 mW) min. 17 dBm (50 mW) +/- 20 kHz +/- 2.5 ppm
KU UP 5457 A
400 ... 700 MHz 5400 ... 5700 MHz 5000 MHz typ. 17 dB, min. 15 dB max. 5 mW (+7 dBm) typ. 100 mW (+20 dBm) +/- 2 ppm +/- 3 ppm typ. -85 dBc/Hz typ. -92 dBc/Hz typ. -100 dBc/Hz
KU UP 5659 A
400 ... 700 MHz 5600 ... 5900 MHz 5200 MHz typ. 17 dB, min. 15 dB max. 5 mW (+7 dBm) typ. 100 mW (+20 dBm) +/- 2 ppm +/- 3 ppm typ. -85 dBc/Hz typ. -92 dBc/Hz typ. -100 dBc/Hz
91
http://www.kuhne-electronic.de
2010/2011
Up Converters
Up Converter for 10000...12700 MHz
FEATURES Low phase noise oscillator High frequency stability of the oscillator High linearity Overvoltage protection and reverse polarity protection BLOCK DIAGRAM
APPLICATIONS Digital broadcast systems (DVB-T, DVB-S) Analog and digital transmission systems IMPORTANT NOTES Additional cooling required
Block diagram for KU UP 107 A
KU UP 107 A
2260 ... 2310 MHz selectable in the range from 10000 ... 10700 MHz with 50 MHz bandwidth in the range between 7740 8440 MHz typ. 30 dB typ. 1 mW, max. 5 mW min. 1 W typ. +23 dBm +/- 50 kHz +/- 50 kHz
KU UP 112 A
2420 ... 2470 MHz selectable in the range from 10700 ... 11400 MHz with 50 MHz bandwith in the range between 8280 ... 8930 MHz typ. 30 dB typ. 1 mW, max. 5 mW typ. 1 W typ. +23 dBm +/- 2 ppm +/- 3 ppm typ. -80 dBc/Hz typ. -79 dBc/Hz
KU UP 1212 A
950 ... 1450 MHz 12200 ... 12700 MHz
LO frequency Gain Input power Output power Output power (digital applications) LO accuracy @ 18 C LO frequency stability (040 C) Phase noise @ 1 kHz Phase noise @ 10 kHz Phase noise @ 100 kHz Image rejection Maximum case temperature Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
11250 MHz typ. 30 dB typ. 1 mW, max. 5 mW typ. 1 W typ. +23 dBm +/- 2 ppm +/- 3 ppm
typ. -103 dBc/Hz min. 50 dB +55 C +12 14 V DC typ. 1.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 126 x 64 x 22 typ. 340 g
typ. -91 dBc/Hz min. 50 dB +55 C +12 14 V DC typ. 1.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 126 x 64 x 22 typ. 340 g
typ. -103 dBc/Hz +55 C +12 14 V DC typ. 1.5 A SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium 126 x 64 x 22 typ. 340 g
92
http://www.kuhne-electronic.de
2010/2011
Oscillators
Kuhne electronic offers many different signal sources and oscillators. There are PLL-stabilized fixed frequency oscillators, low phase noise crystal oscillators for microwave frequencies as well as high power signal generators. Oscillators with high stability and low phase noise can be used as Local Oscillators (LO) for down converters. If high frequency accuracy is needed at microwave frequencies, then our modules with extra input for an external 10 MHz reference source are the right choice. PLL-stabilized Oscillators for 100...4000 MHz
FEATURES PLL stabilized oscillator unit Output power up to 100 mW Low phase noise Small milled aluminium case Low frequency drift due to temperature compensated reference oscillator
Type
Available output frequency
KU LO XXXX PLL
Fixed frequency in the range from 100 MHz to 4000 MHz (please request!) up to 100 mW +/- 2 ppm +/- 3 ppm typ. -90 dBc/Hz +9 ... 15 V DC typ. 160 mA SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 140 g
KU LO 2000 PLL
2000 MHz
Output power Frequency accuracy @ 18 C Frequency stability (0 ... +40 C) Phase noise @ 10 kHz Supply voltage Current consumption Output connector, impedance Case Dimensions (mm) Weight
min. +13 dBm +/- 2 ppm +/- 3 ppm typ. -90 dBc/Hz +9 ... 15 V DC typ. 160 mA SMA-female, 50 ohms milled aluminium 80 x 60 x 20 typ. 140 g
93
http://www.kuhne-electronic.de
2010/2011
Signal Generators
Signal generators from Kuhne electronic offer more than 100 W adjustable output power at 2.45 GHz. Typical applications are electromagnetic wave propagation tests, microwave heating and EMC testing. Signal Generator for 2450 MHz
FEATURES Power adjustable with DC voltage Isolator for protection against high VSWR Overvoltage protection and reverse polarity protection Monitor outputs for forward and reverse power detection (DC voltage) Logic ON / OFF control
APPLICATIONS Electromagnetic wave propagation tests Microwave heating EMC (electromagnetic compatibility) tests The Signal Generator KU SG 2.45 30 A is available as a module or together with heat sink and fans. Special versions of the Signal Generator can be supplied on request. OPTIONS Internal potentiometer to set the power level (instead of DC voltage adjust) Other frequencies More power Signal generator mounted on heat sink with fans
ACCESSORIES Recommended power supply unit: S 150 W 12 Recommended heat sink: SK 300-62 Recommended fan: 2 pcs FAN 60x60 12 V
Type
Frequency Frequency accuracy @ 18 C Output power Phase noise @ 100 kHz Harmonic rejection ON voltage VSWR protection Maximum case temperature Supply voltage Current consumption Output connector, impedance Case Dimensions (mm) Weight
KU SG 2.45 - 30 A
2450 MHz +/- 10 kHz 2 ... 30 W (adjustable) typ. -104 dBc/Hz min. 50 dB +5 ... 14 V DC (ON) isolator +55 C +11 ... 14 V DC typ. 8 A SMA-female, 50 ohms milled aluminium 212 x 63 x 22 typ. 500 g
94
http://www.kuhne-electronic.de
2010/2011
Signal Generators
Signal Generator for 2300...2500 MHz
FEATURES Power adjustable in 1 W-steps (KU SG 2325 100) Power adjustable in 2 W-steps (KU SG 2325 200) Frequency adjustable in 100 kHz-steps (optional 10 kHz) High frequency stability Low phase noise LC display for frequency, power and status signals Automatic shutdown at high VSWR, over temperature or interlock error Built-in isolator for protection against high VSWR Remote control via RS 232 and USB
APPLICATIONS Electromagnetic wave propagation tests Microwave heating EMC (electromagnetic compatibility) tests OPTIONS Installation into a 19 desktop case (KU SG 2325 100)
Type
Frequency range Frequency resolution Frequency tolerance Output power Modulation type Protection functions Remote control Supply voltage Current consumption Output connector, impedance Case Dimensions (mm) Weight
KU SG 2325 100
2300 ... 2500 MHz 100 kHz (optional 10 kHz) +/- 10 kHz 1 ... 100 W (adjustable) +/- 5 % CW VSWR (built-in isolator, automatic shutdown), excess temperature and interlock RS 232 and USB 230 V AC / 50 ... 60 Hz (rubber connector) max. 1.6 A N-female, 50 ohms 19 inch-case 3 U / aluminium 482.6 x 150 x 400 typ. 10 kg
KU SG 2325 200
2300 ... 2500 MHz 100 kHz (optional 10 kHz) +/- 10 kHz 1 ... 200 W (adjustable) +/- 5 % CW VSWR (built-in isolator, automatic shutdown), excess temperature and interlock RS 232 and USB 230 V AC / 50 ... 60 Hz (rubber connector) max. 4.2 A N-female, 50 ohms 19 inch-case 4 U / aluminium 482.6 x 180 x 450 typ. 13 kg
95
http://www.kuhne-electronic.de
2010/2011
Beacon Transmitters
Beacon Transmitters for 1296.9, 2320.9, 3400.9, 5760.9, 10368.9 MHz
FEATURES Temperature stabilized crystal oscillator for high frequency stability Optional: connector for external source (e.g. OCXO) - please request! Helical filters and microstrip filters for high spurious and harmonic rejection Compact construction in a German Silver case OPTIONS Other frequencies on request Option 01: SMA-female connector for external oscillator (without internal oscillator)
APPLICATIONS Beacon transmitters to explore radio propagation Signal source for measurement equipment
Type
Frequency Output power Crystal frequency (standard) Frequency stability (0 ... +40 C) Multiplication factor CW keying (telegraphy) CW input connector Supply voltage Current consumption Output connector, impedance Case Dimensions (mm) Weight
MKU 13 BAKE
1296.9 MHz typ. 800 mW 108.075 MHz max. 5 ppm 12 A1, F1 feed-through capacitor +12 ... 14 V DC typ. 500 mA SMA-female, 50 ohms German silver 74 x 56 x 30 typ. 100 g
MKU 23 BAKE
2320.9 MHz typ. 1 W 96.704 MHz max. 5 ppm 24 A1, F1 feed-through capacitor +12 ... 14 V DC typ. 500 mA SMA-female, 50 ohms German silver 111 x 55 x 30 typ. 170 g
MKU 34 BAKE
3400.9 MHz typ. 200 mW 125.959 MHz max. 5 ppm 27 A1, F1 feed-through capacitor +12 ... 14 V DC typ. 300 mA SMA-female, 50 ohms German silver 111 x 55 x 30 typ. 160 g
Type
Frequency Output power Crystal frequency (standard) Frequency stability (0 ... +40 C) Multiplication factor CW keying (telegraphy) CW input connector Supply voltage Current consumption Output connector, impedance Case Dimensions (mm) Weight
MKU 57 BAKE
5760.9 MHz typ. 150 mW 120.019 MHz max. 5 ppm 48 F1 feed-through capacitor +12 ... 14 V DC typ. 360 mA SMA-female, 50 ohms German silver 111 x 55 x 30 typ. 140 g
MKU 10 BAKE
10368.9 MHz typ. 200 mW 108.009 MHz max. 5 ppm 96 F1 Feed-through capacitor +12 ... 14 V DC typ. 280 mA SMA-female, 50 ohms German silver 111 x 55 x 30 typ. 160 g
96
http://www.kuhne-electronic.de
2010/2011
Type
Available output frequencies
MKU LO 12
11736 MHz 11952 MHz 12024 MHz 12096.45 MHz min. 35 mW 122.250 MHz (11736 MHz) 124.500 MHz (11952 MHz) 125.250 MHz (12024 MHz) 126.0047 MHz (12096.45 MHz) typ. 2 ppm, max. 3 ppm 96 +12 ... 14 V DC 250 mA SMA-female, 50 ohms SMA-female, 50 ohms German silver 111 x 55 x 30 typ. 130 g
Frequency stability (0 ... +40 C) Multiplication factor Supply voltage Current consumption Input connector, impedance (optional) Output connector, impedance Case Dimensions (mm) Weight
97
http://www.kuhne-electronic.de
2010/2011
APPLICATIONS Beacon transmitters to explore radio propagation Signal source for measurement equipment OPTIONS Option 01: SMA-female connector for external oscillator (without internal oscillator) Option 02: milled aluminium case IMPORTANT NOTES Please specify the required beacon frequency in your order. If the frequency is not specified, the standard frequency will be supplied (see table)
Type
Available output frequencies Output power Crystal frequencies (standard) Frequency stability (0 ... +40 C) Multiplication factor CW keying (telegraphy) CW input connector Output connector, impedance Supply voltage Current consumption Case Dimensions (mm) Weight
MKU LO 95
9486 MHz min. 35 mW 98.8125 MHz max. 5 ppm 96
MKU LO 24
24192.9 MHz 24048.9 MHz typ. 5 mW 126.005 MHz (for 24192.9 MHz) 125.255 MHz (for 24048.9 MHz) max. 5 ppm 192 F1 feed-through capacitor
KU LO 92
9200 MHz typ. 200 mW 95.8334 MHz max. 5 ppm 96 F1 feed-through capacitor SMA-female, 50 ohms +12 ... 14 V DC typ. 280 mA German silver 111 x 55 x 30 typ. 160 g
SMA-female, 50 ohms +12 ... 14 V DC 250 mA German silver 111 x 55 x 30 typ. 140 g
SMA-female, 50 ohms +12 ... 14 V DC typ. 280 mA German silver 111 x 55 x 30 typ. 140 g
98
http://www.kuhne-electronic.de
2010/2011
APPLICATIONS Microwave signal source Local oscillator for up and down converters OPTIONS Option 02: Milled aluminium case Other frequencies on request IMPORTANT NOTES An external oscillator is needed!
Type
Available output frequency Output power Frequency stability (0 ... +40 C) Multiplication factor Input frequency (external oscillator) Input power (external oscillator) Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
MKU LO 13
13567 MHz min. 20 mW typ. 40 mW typ. 2 ppm, max. 3 ppm 96 141.3263 MHz 1 mW / 0 dBm +12 ... 14 V DC 250 mA SMA-female, 50 ohms SMA-female, 50 ohms German silver 111 x 55 x 30 typ. 140 g
MKU LO 76
7631.625 MHz min. 20 mW typ. 40 mW typ. 2 ppm, max. 3 ppm 64 119.2441 MHz 1 mW / 0 dBm +12 ... 14 V DC 250 mA SMA-female, 50 ohms SMA-female, 50 ohms German silver 111 x 55 x 30 typ. 134 g
MKU LO 15
15263.25 MHz min. 20 mW typ. 40 mW typ. 2 ppm, max. 3 ppm 128 119.2441 MHz 1 mW / 0 dBm +12 ... 14 V DC 250 mA SMA-female, 50 ohms SMA-female, 50 ohms German silver 111 x 55 x 30 typ. 134 g
99
http://www.kuhne-electronic.de
2010/2011
Fixed Frequency Oscillators for 11736, 12024, 11952 and 12648 MHz
FEATURES Fixed frequency PLL-stabilized crystal oscillator Temperature stabilized crystal oscillator for high frequency stability Input for external 10 MHz reference frequency Automatic activation of PLL if external 10 MHz signal is supplied Lock Detect status: internal LED Overvoltage and reverse polarity protection Helical filters and microstrip filters for high spurious and harmonic rejection
Type
Available output frequencies
MKU XO 1 PLL
96.000 MHz, 98.8125 MHz, 103.500 MHz, 105.666 MHz, 106.500 MHz, 111.000 MHz, 116.000 MHz, 117.000 MHz, 120.000 MHz, 120.888 MHz, 122.250 MHz, 123.666 MHz, 124.500 MHz, 125.250 MHz, 126.000 MHz, 131.750 MHz, 135.666 MHz, 138.000 MHz, 139.9167 MHz, 141.32638 MHz typ. 1 mW typ. 2 ppm, max. 3 ppm (without 10 MHz reference frequency) 10 MHz / 2 ... 10 mW +12...14 V DC 60 mA (without PLL operation) 70 mA (PLL locked) max. 120 mA SMA-female, 50 ohms SMA-female, 50 ohms German silver 74 x 37 x 30 typ. 75 g
MKU LO 95 PLL
9486 MHz
MKU LO 12 PLL
11952 MHz 11736 MHz 12024 MHz 12648 MHz
Output power Frequency stability (0 ... +40 C) External reference frequency Supply voltage Current consumption
min. 35 mW typ. 2 ppm, max. 3 ppm (without 10 MHz reference frequency) 10 MHz / 2 ... 10 mW +12 ... 14 V DC 350 mA
min. 35 mW typ. 2 ppm, max. 3 ppm (without 10 MHz reference frequency) 10 MHz / 2 ... 10 mW +12 ... 14 V DC 260 mA
Input connector for 10 MHz, impedance Output connector, impedance Case Dimensions (mm) Weight
100
http://www.kuhne-electronic.de
2010/2011
Frequency Doublers
X-Band to K-Band Frequency Doubler for 10 GHz to 20 GHz
FEATURES Large bandwidth Internal filter for high fundamental rejection Reverse polarity protection APPLICATIONS Converting clock signals
Type
Input frequency range Output frequency range Input power Output power Fundamental rejection Supply voltage Current consumption Input connector, impedance Output connector, impedance Case Dimensions (mm) Weight
KU X2 1020 B
9 ... 11 GHz 18 ... 22 GHz -2 dBm, max +4 dBm min. +4 dBm, typ. +7 dBm min. 30 dB +12 V DC typ. 50 mA SMA-female, 50 ohms SMA-female, 50 ohms milled aluminium case 50 x 30 x 17 typ. 100 g
KU X2 2040 SHF
19.5 ... 22 GHz 39 ... 44 GHz -1 ... +3 dBm min. +4 dBm 30 dB +7 ... 12 V DC typ. 70 mA SMA-female, 50 ohms K-female, 50 ohms milled aluminium case 50 x 30 x 20 typ. 90 g
101
http://www.kuhne-electronic.de
2010/2011
Microwave TV Transmitters
TV Transmitter Modules for 10000...10500 MHz
FEATURES Frequency Modulation of the baseband signal (Video, Audio) Internal DRO (dielectric resonator oscillator) Adjustable output frequency Milled aluminium case with small mechanical dimensions
APPLICATIONS Analog television in the 10 GHz band ACCESSORIES SMC-connector for 3.2 mm cable IMPORTANT NOTES Please specify the desired center frequency in your order!
APPLICATIONS Analog television in the 24 GHz band, when frequency doubler MKU X2 1224 is used OPTIONS Option 01: without baseband (CVBS) input ACCESSORIES Frequency doubler MKU X2 1224 SMC-connector for 3.2 mm cable IMPORTANT NOTES Please specify the desired center frequency in your order!
Type
Frequency
MKU ATV 10 B
10...10.5 GHz please specify desired frequency in your order! +/- 50 MHz min. 200 mW baseband signal, inverted, max. 1 Vss Frequency Modulation (FM) +12 ... 14 V DC typ. 200 mA SMC-female SMA-female, 50 ohms milled aluminium 76 x 30 x 20 typ. 80 g
MKU ATV 10 H
10.0 ... 10.5 GHz please specify desired frequency in your order! +/- 50 MHz typ. 1 W baseband signal, inverted, max. 1 Vss Frequency Modulation (FM) +12 ... 14 V DC typ. 600 mA SMC-female SMA-female, 50 ohms milled aluminium 100 x 30 x 20 typ. 100 g
MKU ATV 12
12.0 ... 12.125 GHz please specify desired frequency in your order! min. 20 mW baseband signal, inverted, max. 1 Vss max. 20 MHz (baseband) Frequency Modulation (FM) +12 ... 14 V DC typ. 80 mA SMC-female SMA-female, 50 Ohms milled aluminium 50 x 30 x 17 (20) typ. 40 g
Tuning range Output power Input signal Input signal bandwidth Modulation type Supply voltage Current consumption Input connector Output connector, impedance Case Dimensions (mm) Weight
102
http://www.kuhne-electronic.de
2010/2011
Microwave TV Transmitters
TV Transmitter Modules for 24000...24250 MHz
FEATURES Frequency Modulation of the baseband signal (Video, Audio) Internal DRO (dielectric resonator oscillator) Adjustable output frequency Detector output for monitoring output power Milled aluminium case with small mechanical dimensions
Type
Tuning tuning range Output power Supply voltage Current consumption Input connector Output connector, impedance Case Dimensions (mm) Weight
MKU ATV 24
24000 ... 24250 MHz min. 80 mW +12 ... 14 V DC typ. 230 mA SMC-female R220 / WR 42 / WG 20 milled aluminium case 124 x 45 x 30 typ. 210 g
103
http://www.kuhne-electronic.de
2010/2011
Bias Tees
Bias Tees for 10...3000 MHz
Bias Tees for remote power supply of preamplifiers and converters via the coaxial cable. The Bias Tee KU BT 271 N contains a replaceable 1 Ampere fuse and it is protected against overvoltage and reverse polarity.
Type
Frequency range Insertion loss@ 150 MHz Insertion loss@ 1300 MHz Insertion loss@ 3000 MHz Supply voltage range Current DC connector Input connector (DC output), impedance Output connector, impedance Case Dimensions (mm) Weight
KU BT 271 N
10 ... 3000 MHz typ. 0.1 dB typ. 0.5 dB typ. 1.0 dB 0 ... +15 V DC max. 1 A DC socket 2.1 mm N-female, 50 ohms N-female, 50 ohms German silver 37 x 37 x 30 typ. 90 g
KU BT 3000 N
10 ... 3000 MHz typ. 0.2 dB typ. 0.5 dB typ. 0.9 dB 0 ... +30 V DC max. 1 A BNC-female N-female, 50 ohms N-male, 50 ohms milled aluminium 50 x 30 x 22 typ. 100 g
KU BT 3000 DIP
100 ... 3000 MHz typ. 0.5 dB, max. 1.0 dB @ 100 MHz typ. 0.8 dB, max. 1.3 dB @ 2000 MHz typ. 1.5 dB, max. 2.0 dB @ 3000 MHz max. 1 W (+30 dBm) 10 MHz 0 ... 30 V DC max. 500 mA Protected with a 500 mA self resetting semiconductor fuse N-female, 50 ohms N-female, 50 ohms BNC-female, 50 ohms milled aluminium 50 x 30 x 22 typ. 100 g
RF input power (Port 1 - Port 2) Input frequency Port 3 Voltage at DC Port Current
Connector Port 1, impedance Connector Port 2, impedance Connector Port 3, impedance Case Dimensions (mm) Weight
104
http://www.kuhne-electronic.de
2010/2011
Applications
Products from Kuhne electronic can be used for a great variety of applications. Most converters and amplifiers are suitable for analog and digital transmission systems. Typical applications are radio links, digital broadcast, satellite reception or the use as measurement and testing equipment. Analog and Digital Transmission on 2100 ... 2300 MHz
540 - 740 MHz -3 dBm -13 ... -9 dBm
RF input signal analog signal (e.g. FM) digital signal (e.g. QPSK, QAM)
Up converter for 2100 - 2300 MHz Power amplifier for 2100 - 2300 MHz
RF input signal analog signal (e.g. FM) digital signal (e.g. QPSK, QAM)
Up converter for 2300 - 2500 MHz Power amplifier for 2300 - 2500 MHz
RF input signal analog signal (e.g. FM) digital signal (e.g. QPSK, QAM)
Up converter for 2500 - 2700 MHz Power amplifier for 2500 - 2700 MHz
Up converter for 3400 - 3600 MHz Power amplifier for 3400 - 3600 MHz
RF output signal output power typ. 9 W output power typ. 0.8 ... 2 W
Up converter for 5400 - 5700 MHz Power amplifier for 5400 - 5700 MHz
http://www.kuhne-electronic.de
2010/2011
Applications
Analog and Digital Transmission on 5600 ... 5900 MHz
400 - 700 MHz -13 dBm -23 ... -19 dBm
RF input signal analog signal (e.g. FM) digital signal (e.g. QPSK, QAM)
RF output signal output power typ. 9 W output power typ. 0.8 ... 2 W
Up converter for 5600 - 5900 MHz Power amplifier for 5600 - 5900 MHz
power amplifier
please request!
*) output frequency range, bandwidth 50 MHz, can be selected within 10000 - 10700 MHz Local Oscillator (LO) frequency depends on selected output frequency range
KU UP 107 A (page 92) MKU MKU MKU MKU MKU PA PA PA PA PA 102 X (output power 4 W) 102 XL (output power 10 W) 103 XLC (output power 16 W) 1025 A (output power 25 W) 1050 A (output power 50 W) (page (page (page (page (page 74) 74) 75) 75) 75)
power amplifier
please request!
power amplifier
please request!
106
http://www.kuhne-electronic.de
2010/2011
PRODUCT OVERVIEW
107
http://www.kuhne-electronic.de
2010/2011
Product Overview
Broadband Low Noise Amplifiers
Type Frequency range (MHz)
KU LNA BB 1018 A KU LNA BB 2240 A KU LNA BB 3050 A KU LNA BB 0515 A-SMA KU LNA BB 0515 B-N KU LNA BB 0515 C-N KU LNA BB 1020 A KU LNA BB 1522 A KU LNA BB 2227 A KU LNA BB 3000 A KU LNA BB 3000 C-N KU LNA BB 2533 A KU LNA BB 0180 A-SMA KU LNA BB 0180 B-N KU LNA BB 0180 C-N KU LNA BB 0112 A KU LNA BB 202 A 100 180 225 400 350 500 5 1500 5 1500 5 1500 1000 2000 1500 2200 2200 2700 10 3000 10 3000 2500 3300 1 7000 1 7000 1 7000 100 12000 100 20000
Connectors Input
SMA-female SMA-female SMA-female SMA-female N-female N-female SMA-female SMA-female SMA-female SMA-female N-female SMA-female SMA-female N-female N-female SMA-female SMA-female
Case
Page
Output
SMA-female SMA-female SMA-female SMA-female N-female N-male SMA-female SMA-female SMA-female SMA-female N-male SMA-female SMA-female N-female N-male SMA-female SMA-female milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium 07 07 07 08 08 08 11 11 11 09 09 09 08 08 08 10 10
1) Noise figure values at +18 C. Only for narrowband preamplifiers: noise figure is specified at center frequency
Connectors Input
N-male N-male N-male N-male SMA-male SMA-female SMA-male SMA-female R 100 2) R 120 2) R 220 2) SMA-male R 500 2) R 500 2)
Case
Page
Output
N-female N-female N-female N-female SMA-female SMA-female SMA-female SMA-female SMA-female SMA-female SMA-female SMA-female R 500 2) R 500 2) milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium 12 12 14 14 15 15 15 15 15 15 16 16 17 17
1) Noise figure values at +18 C. Only for narrowband preamplifiers: noise figure is specified at center frequency 2) Also see waveguide table
Waveguide table
DIN 47 302 / IEC 153 R 100 R 120 R 220 R 500 British Standard WG 16 WG 17 WG 20 WG 24 RETMA WR 90 WR 75 WR 42 WR 19
108
http://www.kuhne-electronic.de
2010/2011
Product Overview
Low Noise Amplifiers
Type Frequency range (MHz)
KU LNA 222 AH MKU LNA 341 AH * MKU LNA 342 AH * KU LNA 3436 A KU LNA 3436 B KU LNA 4450 A KU LNA 5059 A * KU LNA 6570 A KU LNA 682 A KU LNA 682 A-BIAS KU LNA 922 A KU LNA 922 B 2200 2400 3400 .. 3460 3400 .. 3460 3400 3600 3400 ... 3600 4400 ... 5000 5000 ... 5900 6500 ... 7000 6790 ... 9810 6790 ... 9810 9190 ... 9210 9190 ... 9210
Connectors Input
SMA-female N-male N-male SMA-male SMA-female SMA-female SMA-female SMA-female SMA-female SMA-female SMA-male SMA-female
Case
Page
Output
SMA-female N-female N-female SMA-female SMA-female SMA-female SMA-female SMA-female SMA-female SMA-female SMA-female SMA-female milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium milled aluminium 14 19 19 18 18 20 20 19 21 21 22 22
1) Noise figure values at +18 C. Only for narrowband preamplifiers: noise figure is specified at center frequency *) Preliminary data
Low Noise Amplifiers for Avionics, Radio Astronomy and Satellite Reception
Type Frequency range (MHz)
KU LNA 1090 A KU LNA 1090 A TM KU LNA 133 BH KU LNA 142 AH KU LNA 163 BH KU LNA 152 AH KU LNA 1575/4 SMA KU LNA 1575-50 KU LNA 183 BH KU LNA 172 A KU LNA 8000 A KU LNA 8000 A-SMA 1070 1110 1070 1110 1200 ... 1400 1350 1450 1500 ... 1700 1520 ... 1560 1575 (+/- 10) 1575 (+/- 10) 1600 ... 1900 1695 (+/- 10) 8000 8450 8000 8450
Connectors Input
N-female N-female SMA-female N-male SMA-female SMA-female SMA-female N-female SMA-female N-male R 100 2) SMA-female
Case
Page
Output
BNC-female N-female SMA-female N-female SMA-female SMA-female 4 x SMAfemale N-female SMA-female N-female SMA-female SMA-female German silver German silver milled aluminium milled aluminium milled aluminium milled aluminium German silver milled aluminium milled aluminium German silver milled aluminium milled aluminium 23 23 13 26 13 24 25 25 13 24 26 26
1) Noise figure values at +18 C. Only for narrowband preamplifiers: noise figure is specified at center frequency 2) Also see waveguide table
Frequency Range
500 ... 2500 MHz 50 ... 2500 MHz 50 ... 3000 MHz
Input Power
1 mW 1 mW 2 mW
Output Power
1.0 ... 3 W 1.5 ... 3 W 2 ... 4 W
Gain
30 dB 33 dB 32 dB
DC-Voltage
+12 ... 14 V +24 ... 26 V +24 ... 26 V
Current
typ. 1.7 A typ. 700 mA typ. 850 mA
Page
28 28 28
109
http://www.kuhne-electronic.de
2010/2011
Product Overview
VHF Power Amplifiers
Type
MKU PA 1317-60 HY MKU PA 1317-120 HY
Frequency Range
130 170 MHz 135 170 MHz
Input Power
50 mW 100 mW
Output Power
60 W 120 W
Gain
DC-Voltage
+12 ... 14 V +12 ... 14 V
Current
max. 12 A max. 21 A
Page
29 29
Frequency Range
400 ... 470 MHz 400 ... 470 MHz 450 500 MHz 800 900 MHz
Input Power
50 mW 100 mW 30 mW 30 ... 50 mW
Output Power
60 W 120 W 35 W 1W
Gain
34 dB 33 dB 30 dB 15 dB
DC-Voltage
+12 ... 14 V +12 ... 14 V +12 V +12 ... 14 V
Current
max. 10 A max. 28 A max. 8.5 A typ. 350 mA
Page
30 30 31 31
Frequency Range
1240 1300 MHz 1240 1300 MHz 1240 1300 MHz 1240 1300 MHz 1240 1300 MHz 1240 1300 MHz 1240 1300 MHz 1240 1300 MHz 1240 1300 MHz 1240 1300 MHz 1240 ... 1300 MHz
Input Power
50 mW 100 mW 200 mW 400 mW 1W 3W 300 mW 5W 0.5 W 15 W 15 W
Output Power
1W 30 W 60 W 120 W 30 W 50 W 100 W 100 W 200 W 200 W 500 W
DC-Voltage
+12 ... 14 V +12 ... 13.8 V +12 ... 13.8 V +12 ... 13.8 V +26 V +26 V +26 V +26 V +26 V +26 V +28 V
Current
0.45 A 10 A 20 A 40 A 3.5 A 6A 14 A 14 A 26 A 24 A 50 A
Page
33 32 32 32 33 33 34 34 34 34 35
Frequency Range
1300 ... 1400 MHz 1350 ... 1450 MHz 1300 ... 1400 MHz 1350 ... 1450 MHz 1400 1600 MHz 1450 1600 MHz 1450 1500 MHz 1600 ... 1680 MHz 1620 ... 1670 MHz 1700 ... 2200 MHz 1800 ... 1900 MHz 1800 ... 2000 MHz 1900 ... 2200 MHz
Input Power
50 ... 80 mW 50 ... 80 mW 1W 1W 1W 10 mW 4W 10 mW 4W 200 mW 50 mW 1.5 W 60 mW
Output Power
1W 1W 30 W 25 W 45 W 4W 120 W 4W 140 W 50 W 10 W 45 W 35 W
Gain
13 dB 13 dB
DC-Voltage
+12 14 V +12 14 V +26 V +26 V +28 V +12 ... 14 V
Current
max. 0.5 A max. 0.5 A max. 3.5 A max. 3.5 A max. 5 A max. 1.5 A max. 12 A max. 1.5 A max. 12 A max. 4.5 A typ. 0.9 A typ. 4.5 A max. 5.2 A
Page
37 37 37 37 39 38 38 38 38 40 41 41 42
16 dB 27 dB 18 dB 31 dB 23 dB 16 dB 26 dB
110
http://www.kuhne-electronic.de
2010/2011
Product Overview
S-Band Power Amplifiers for 2000 ... 3000 MHz
Type Frequency Range Input Power
50 mW 50 mW 50 mW 3 mW 3 mW 3 mW 1 mW 1 mW 5 mW 5 mW 0.5 mW 0.1 mW 0.1 mW 0.1 mW 15 mW 15 mW 15 mW 5W 15 mW 80 mW 1W 1W 2W 2W 2W 5W 5W 5W 5W 12 W 12 W 12 W 15 W 15 W 15 W 15 W 15 W 15 W 1.5 W 1.6 W
Output Power CW
>4W >4W >4W >4W >4W >4W >4W >4W >8W >8W typ. 18 W > 20 W > 20 W > 20 W > 20 W > 20 W 20 W 50 W > 20 W 23 W 20 W 400 W > 20 W > 20 W > 20 W > 50 W > 50 W > 50 W 130 W typ. 100 W typ. 100 W typ. 100 W typ. 150 W typ. 150 W 200 W 200 W 200 W 200 W 45 W 40 W
Gain
DC-Voltage
Current
Page
KU PA 222 TX KU PA 242 TX KU PA 262 TX KU PA 223 BBA KU PA 243 BBA KU PA 263 BBA KU PA 2127 ALK KU PA 2327 AL KU PA 2027 BK KU PA 2327 BL KU PA 2327 LD-20 KU PA 2123 A KU PA 2325 A KU PA 2527 A KU PA 2123 B KU PA 2325 B KU PA 2325 BLK KU PA 2325 DLK KU PA 2527 B MKU PA 232 HXL-2 MKU PA 231 HXL2 MKU PA 23400 CU KU PA 2123 C KU PA 2325 C KU PA 2527 C KU PA 2123 D KU PA 2325 D KU PA 2527 D MKU PA 23130 A KU PA 2123 E KU PA 2325 E KU PA 2527 E KU PA 2325 F KU PA 2527 F KU PA 2021 LD 200 KU PA 2122 LD 200 KU PA 2223 LD 200 KU PA 2323 LD 200 KU PA 2045 A KU PA 2345 A
2100 2300 MHz 2300 2500 MHz 2500 ... 2700 MHz 2100 ... 2300 MHz 2300 ... 2500 MHz 2500 ... 2700 MHz 2100 2700 MHz 2300 2700 MHz 2000 2700 MHz 2300 2700 MHz 2300 2700 MHz 2100 2300 MHz 2300 2500 MHz 2500 2700 MHz 2100 2300 MHz 2300 2500 MHz 2300 ... 2450 MHz 2300 ... 2450 MHz 2500 2700 MHz 2300 ... 2400 MHz 2300 ... 2400 MHz 2300 2400 MHz 2100 2300 MHz 2300 2500 MHz 2500 2700 MHz 2100 2300 MHz 2300 2500 MHz 2500 2700 MHz 2300 2400 MHz 2100 2300 MHz 2300 2500 MHz 2500 2700 MHz 2300 2500 MHz 2500 2700 MHz 2000 2100 MHz 2100 2200 MHz 2200 2300 MHz 2250 2350 MHz 2000 2100 MHz 2300 2500 MHz
20 dB 20 dB 20 dB 34 dB 33 dB 31 dB 39 dB 39 dB 37 dB 37 dB 44 dB 55 dB 55 dB 53 dB 31 dB 31 dB 31 dB 10 dB 31 dB 25 dB 13 dB 10 dB 10 dB 10 dB 10 dB 10 dB 10 dB 12 dB 10 dB 10 dB 10 dB 10 dB 10 dB 10 dB 10 dB 10 dB 10 dB 16 dB 13 dB
+12 14 V +12 14 V +12 14 V +12 14 V +12 14 V +12 14 V +11 14 V +11 14 V +11 14 V +11 14 V +11 26 V +11 14 V +11 14 V +11 14 V +11 14 V +11 14 V +11 ... 14 V +11 ... 14 V +11 14 V +12 ... 14 V +12 ... 14 V +28 V +11 14 V +11 14 V +11 14 V +13 V +13 V +13 V +28 V +13 V +13 V +13 V +13 V +13 V +28 V +28 V +28 V +28 V +28 V +28 V
max. 1.5 A max. 1.5 A max. 1.5 A max. 1.5 A max. 1.5 A max. 1.5 A typ. 1.6 A typ. 1.6 A max. 3.5 A max. 3.5 A max. 8.7 A typ. 8.0 A typ. 8.0 A typ. 8.0 A typ. 7.5 A typ. 7.5 A tp. 7.5 A typ. 10 A typ. 7.5 A max. 5 A max. 5 A max. 42 A typ. 6.0 A typ. 6.0 A typ. 6.0 A typ. 10 A typ. 10 A typ. 10 A max. 10 A typ. 22 A typ. 22 A typ. 22 A typ. 30 A typ. 30 A max. 22 A max. 22 A max. 22 A max. 22 A typ. 4.5 A typ. 4 A
43 43 43 43 43 43 46 46 47 47 48 49 49 49 50 50 45 45 50 44 44 55 51 51 51 51 51 51 54 52 52 52 52 52 53 53 53 53 41 39
111
http://www.kuhne-electronic.de
2010/2011
Product Overview
C-Band Power Amplifiers for 3000 ... 7000 MHz
Type
KU PA 3240 TX KU PA 3337 TX KU PA 3436 AL KU PA 3436 B KU PA 3450 MM KU PA 4450 - 8B * KU PA 4450 - 30 A * KU PA 5060 TX KU PA 5358 AL KU PA 5359 A KU PA 6800 TR KU PA 6800 A KU PA 6800 B KU PA 6800 C KU PA 6834 TX *) Preliminary data
Frequency Range
3200 ... 4000 MHz 3300 3700 MHz 3400 3600 MHz 3400 3600 MHz 3400 ... 5000 MHz 4400 ... 5000 MHz 4400 ... 5000 MHz 5000 ... 6000 MHz 5300 ... 5800 MHz 5300 ... 5900 MHz 6790 ... 6810 MHz 6790 ... 6810 MHz 6790 ... 6810 MHz 6790 ... 6810 MHz 6734 ... 6934 MHz
Input Power
5 mW 5 mW 0.5 mW 0.2 mW 20 dBm 10 mW 10 mW 8 mW 2 mW 5 mW 10 mW 10 mW 200 mW 400 mW 10 mW
Output Power
3.3 W 1.6 W 4W 18 W 33 dBm 7W 14 W 800 mW 3.5 W 9W 500 mW 8W 8W 15 W 900 mW
Gain
27 dB
DC-Voltage
+12 14 V +11 14 V +11 ... 14 V
Current
typ. 1.7 A 1A max. 2.4 A typ. 5.5 A max. 1.8 A max. 4 A max. 12 A typ. 530 mA max. 2.5 A max. 4.5 A typ. 350 mA typ. 3 A typ. 3 A typ. 6.5 A typ. 820 mA
Page
57 57 60 60 64 65 65 70 69 69 71 71 71 71 70
48 dB 24 dB 36 dB 46 dB 21 dB 34 dB 35 dB 17 dB 29 dB 16 dB 16 dB 20 dB
+12 ... 14 V +12 14 V +12 14 V +12 14 V +10 14 V +12 ... 14 V +12 ... 14 V +12 14 V +12 ... 14 V +12 14 V +12 14 V +12 15 V
Frequency Range
3400 ... 3500 MHz 3370 ... 3430 MHz 3400 ... 3600 MHz 3400 ... 3600 MHz 3370 ... 3430 MHz 3370 ... 3430 MHz 3370 ... 3430 MHz 3370 ... 3430 MHz 3400 ... 3600 MHz 3400 ... 3460 MHz 3400 ... 3460 MHz 3370 ... 3430 MHz 3400 ... 3460 MHz
Input Power
50 mW 40 mW 200 mW 900 mW 100 mW 250 mW 200 mW 30 mW 2W 8W 1W 1W
Output Power
0.9 W 4W 9W 9W 12 W 4W 20 W 40 W 9W 28 W 75 W 120 W 300 W
DC-Voltage
+12 ... 14 V +12 ... 14 V + 28 V +12 ... 14 V +12 ... 14 V +12 ... 14 V +12 ... 14 V +12 ... 14 V + 28 V + 28 V + 28 V +13 ... 14 V + 28 V
Current
0.3 A 1.5 A 1.4 A 5A 3A 1.2 A 5A 15 A 3.8 A 5A 10 A 34 A 42 A
Page
58 61 59 58 61 61 62 62 59 63 63 62 63
Frequency Range
5740 ... 5780 MHz 5740 ... 5780 MHz 5740 ... 5780 MHz 5740 ... 5780 MHz 5740 ... 5780 MHz 5740 ... 5780 MHz
Input Power
600 mW 100 mW 200 mW 300 mW 200 mW 200 mW
Output Power
4W 4W 8W 15 W 50 W 100 W
DC-Voltage
+12 ... 14 V +12 ... 14 V +12 ... 14 V +12 ... 14 V +12 V +12 V
Current
1.2 A 1.4 A 2.5 A 6A 13 A 28 A
Page
66 66 67 67 67 68
112
http://www.kuhne-electronic.de
2010/2011
Product Overview
Power Amplifiers for 8 ... 15 GHz
Type
KU PA 8183 TX KU PA 093 MM KU PA 092 X KU PA 092 XLC KU PA 103 MM KU PA 0913-2A KU PA 113 MM KU PA 1215-2A KU PA 142 AVS KU PA 14005 A-3 * *) Preliminary data
Frequency Range
8100 8300 MHz 8500 10000 MHz 9190 ... 9210 MHz 9190 ... 9210 MHz 9500 11000 MHz 9500 13300 MHz 11000 12500 MHz 12700 15400 MHz 14000 14500 MHz 14000 14500 MHz
Input Power
10 mW 8 mW 200 mW 200 mW 8 mW 15 mW 8 mW 15 mW 200 mW 20 mW
Output Power
800 mW 1.5 W 4W 15 W 1.5 W 2.0 W 1.5 W 2.0 W 3W 6W
Gain
19 dB 23 dB 13 dB 18 dB 23 dB 23 dB 23 dB 22 dB 13 dB 30 dB
DC-Voltage
+12 15 V +12 14 V +12 ... 14 V +12 ... 14 V +12 14 V +12 14 V +12 14 V +12 14 V +12 14 V +12 14 V
Current
typ. 820 mA typ. 1.8 A typ. 2 A typ. 8 A typ. 1.8 A typ. 1.5 A typ. 1.8 A typ. 1.6 A typ. 1.6 A typ. 4.0 A
Page
70 76 72 72 76 76 76 76 77 77
Frequency Range
10340 ... 10390 MHz 10340 ... 10390 MHz 10340 ... 10390 MHz 10340 ... 10390 MHz 10280 ... 10450 MHz 10280 ... 10450 MHz 10280 ... 10450 MHz 10280 ... 10450 MHz 10300 ... 10400 MHz 10300 ... 10400 MHz 10300 ... 10400 MHz
Input Power
200 mW 230 mW 50 mW 10 mW 800 mW 1.5 W 200 mW 200 mW 200 mW 200 mW 200 mW
Output Power
1W 2W 1W 200 mW 4W 8W 4W 10 W 16 W 25 W 45 W
DC-Voltage
+12 ... 14 V +12 ... 14 V +12 ... 14 V +12 ... 14 V +12 ... 14 V +12 ... 14 V +12 ... 14 V +12 ... 14 V +12 ... 14 V +12 ... 14 V +12 ... 14 V
Current
450 mA 800 mA 500 mA 250 mA 1.8 A 4A 2A 4A 8A 8A 20 A
Page
73 73 73 73 74 74 74 74 75 75 75
Frequency Range
24000 24250 MHz 24000 24250 MHz 24000 24250 MHz 24000 24250 MHz 24000 24250 MHz
Input Power
0.1 mW 20 mW 20 mW 20 mW 20 mW
Output Power
20 mW 1.1 W 3W 10 W 10 W *
DC-Voltage
+10 ... 15 V +12 ... 15 V +10 ... 12 V +9 ... 10 V +9 ... 10 V
Current
70 mA 1.2 A 3A 15 A 15 A
Page
78 78 79 79 79
Circulators
Type
VAM 1081
Frequency Range
1250 ... 1300 MHz
Isolation
min. 23 dB
Power
max. 500 W CW
Page
80
113
http://www.kuhne-electronic.de
2010/2011
Product Overview
Low Noise Converters
Type
KU LNC 2027 B PRO KU LNC BB 2030 B KU LNC 23-3 KU LNC 23-3 TM KU LNC 25 KU LNC 25 TM KU LNC 2227 B PRO KU LNC 3436 A KU LNC 3136 A KU LNC 5659 C PRO KU LNC 6772 A KU LNC 107 A
Frequency Range RF
2000 2700 MHz 2020 3000 MHz 2100 2600 MHz 2100 2600 MHz 2350 ... 2550 MHz 2350 ... 2550 MHz 2200 ... 2700 MHz 3400 ... 3560 MHz 3100 ... 3600 MHz 5600 ... 5900 MHz 6700 ... 7200 MHz 10000 10700 MHz
Frequency Range IF
167 867 MHz 20 1000 MHz 1184 1684 MHz 1184 1684 MHz 1433.5 ... 1633.5 MHz 1433.5 ... 1633.5 MHz 367 ... 867 MHz 400 ... 560 MHz 200 ... 700 MHz 400 ... 700 MHz 300 ... 800 MHz 1400 2100 MHz
Noise Figure
1.0 dB 2.0 dB 1.0 dB 1.0 dB 0.7 dB 0.7 dB 1.0 dB 1.0 dB 2.0 dB 1.0 dB 1.5 dB 1.3 dB
Gain
30 dB 30 dB 40 dB 40 dB 40 dB 40 dB 30 dB 44 dB 37 dB 40 dB 38 dB 36 dB
Page
84 84 83 83 83 83 84 85 85 86 86 88
Frequency Range RF
1390 ... 1410 MHz 1390 ... 1410 MHz 1540 ... 1560 MHz 1695 ... 1710 MHz 1695 1710 MHz 8000 8450 MHz
Frequency Range IF
VHF range VHF range VHF range 138 153 MHz 138 153 MHz 850 1300 MHz
Noise Figure
0.6 dB 0.6 dB 0.6 dB 0.7 dB 0.7 dB 1.2 dB
Gain
20 dB 60 dB 20 dB 20 dB 60 dB 28 dB
Page
82 82 82 82 82 87
Frequency Range RF
2320 ... 2450 MHz 2320 ... 2450 MHz 5600 ... 5900 MHz 24000 ... 24250 MHz
Frequency Range IF
1403.5 ... 1533.5 MHz 1403.5 ... 1533.5 MHz 1450 ... 1650 MHz 1000 ... 1250 MHz
Noise Figure
0.7 dB 0.7 dB 1.0 dB 2.5 dB
Gain
40 dB 40 dB 40 dB 45 dB
Page
83 83 86 88
Up Converters
Type
KU UP 2123 A KU UP 2325 A KU UP 2527 A KU UP 3436 A KU UP 5457 A KU UP 5659 A KU UP 107 A KU UP 112 A KU UP 1212 A * *) Preliminary data
Frequency Range RF
2100 2300 MHz 2300 2500 MHz 2500 2700 MHz 3400 3600 MHz 5400 5700 MHz 5600 ... 5900 MHz 10000 10700 MHz 10700 11400 MHz 12200 12700 MHz
Frequency Range IF
540 740 MHz 597 797 MHz 662 862 MHz 400 600 MHz 400 700 MHz 400 ... 700 MHz 2260 2310 MHz 2420 ... 2470 MHz 950 1450 MHz
Bandwith
200 MHz 200 MHz 200 MHz 200 MHz 300 MHz 300 MHz min. 50 MHz min. 50 MHz min. 50 MHz
Output Power
50 mW 50 mW 100 mW 20 mW 100 mW 100 mW 1W 1W 1W
Page
90 90 90 91 91 91 92 92 92
114
http://www.kuhne-electronic.de
2010/2011
Product Overview
PLL-stabilized Oscillators
Type
KU LO 2000 PLL KU LO xxxx PLL
Frequency Range RF
2000 MHz xxxx MHz
Frequency Range IF
typ. 90 dBc / Hz typ. 90 dBc / Hz
Output Power
min. +13 dBm up to 100 mW
Remarks
Fixed frequency (not adjustable) Fixed frequency between 100 4000 MHz Please request!
Page
93 93
Frequency
9200 MHz 9486 MHz 9486 MHz 11736 MHz 11952 MHz 12024 MHz 12096.45 MHz 11736 MHz 11952 MHz 12024 MHz 12648 MHz 24192.9 MHz 24048.9 MHz different frequencies
Output Power
typ. 200 mW 35 mW 35 mW 35 mW
Input Frequency
internal oscillator * internal oscillator * 10 MHz internal oscillator *
Page
98 98 100 97
MKU LO 12 PLL
35 mW
10 MHz
100
5 mW 1 mW 10 MHz
98 100
Frequency
13567 MHz 7631.625 MHz 15263.25 MHz
Output Power
20 mW 20 mW 20 mW
Input Frequency
141.3264 MHz, 1 mW 119.2441 MHz, 1 mW 119.2441 MHz, 1 mW
Page
99 99 99
Signal Generators
Type
KU SG 2.45 30 A KU SG 2325 100 KU SG 2325 200
Frequency
2450 MHz 2300 ... 2500 MHz 2300 ... 2500 MHz
Output Power
2 30 W (adjustable) 1 100 W (adjustable) 1 200 W (adjustable)
Page
94 94 94
Standard Frequency
1296,9 MHz 2320.9 MHz 3400.9 MHz 5760.9 MHz 10368.9 MHz
Output Power
0,8 W 1.0 W 200 mW 150 mW 200 mW
Keying
A1, F1 A1, F1 A1, F1 F1 F1
Page
96 96 96 96 96
115
http://www.kuhne-electronic.de
2010/2011
Product Overview
Frequency Doublers
Type
KU X2 1020 B KU X2 2040 SHF
Input
SMA-female SMA-female
Output
SMA-female K-female
Page
101 101
Frequency Range RF
10000 ... 10500 MHz 10000 ... 10500 MHz 12000 ... 12125 MHz 24000 ... 24250 MHz 24000 ... 24250 MHz
Tuning Range
+/- 50 MHz +/- 50 MHz 125 MHz 250 MHz 250 MHz
Output Power
200 mW 1W 20 mW 100 mW 300 mW
Page
102 102 102 103 103
Bias Tees
Type
KU BT 271 N KU BT 3000 N KU BT 3000 DIP * *) Preliminary data
Frequency Range
10 ... 3000 MHz 10 ... 3000 MHz 100 ... 3000 MHz
Voltage Range
+0 15 V DC +0 30 V DC +0 30 V DC
Current
max. 1 A max. 1 A max. 500 mA
DC Connector
DC socket 2.1 mm BNC-male Solder pin
RF output
N-female, 50 ohms N-male, 50 ohms N-female, 50 ohms
Case
German silver milled aluminium milled aluminium
Page
104 104 104
Power Splitters
Type
MKU DIV 1300-1-SMA MKU DIV 1300-1-N MKU DIV 1300-1-7/16 KU DIV 1575 MKU DIV 2300-1-N MKU DIV 2300-1-N MKU DIV 2300-1-N
Center frequency
1266 ... 1326 MHz 1266 ... 1326 MHz 1266 ... 1326 MHz 1565 ... 1585 MHz 2300 ... 2330 W 2300 ... 2330 W 2300 ... 2330 W
Insertion Loss
typ. 3.1 dB typ. 3.1 dB typ. 3.1 dB typ. 3 dB
Applications
Can be used to combine two power amplifiers (MKU PA 13500 CU) Can be used to combine two power amplifiers Can be used to combine two power amplifiers (MKU PA 13500 CU) Use of two GPS-receivers with on common antenna Can be used to combine two power amplifiers (MKU PA 23400 CU) Can be used to combine two power amplifiers Can be used to combine two power amplifiers (MKU PA 23400 CU)
Page
36 36 36 25 56 56 56
50 W 600 W 1200 W
Crystal Heater
Type
QH 40 A
Temperature
typ. 40.8 C
Temperature Stability
typ. 0.1 C
Supply Voltage
+8 ... 12 V (stabilized)
Applications
Temperature stabilisation of crystals for high frequency stability
116
http://www.kuhne-electronic.de
2010/2011
Accessories
Power Supply Units
Type
S 150 W 12 S 150 W 24 SP 150 W 27 SP 200 W 12 SP 320 W 12 SP 320 W 24 SP 320 W 27 SP 500 W 12 SP 500 W 24 SP 500 W 27 RSP 1500 W 27
Voltage (Output)
12 V DC 24 V DC 27 V DC 12 V DC 12 V DC 24 V DC 27 V DC 12 V DC 24 V DC 27 V DC 27 V DC
Current (Output)
12.5 A 6.5 A 5.6 A 16.7 A 25 A 12.5 A 11.7 A 40 A 20 A 18 A 56 A
Power
150 W 150 W 150 W 200 W 320 W 320 W 320 W 500 W 500 W 500 W 1500 W
Voltage (Input)
110 / 230 V AC, 50 60 Hz 110 / 230 V AC, 50 60 Hz 110 / 230 V AC, 50 60 Hz 110 / 230 V AC, 50 60 Hz 110 / 230 V AC, 50 60 Hz 110 / 230 V AC, 50 60 Hz 110 / 230 V AC, 50 60 Hz 110 / 230 V AC, 50 60 Hz 110 / 230 V AC, 50 60 Hz 110 / 230 V AC, 50 60 Hz 110 / 230 V AC, 50 60 Hz
Heat Sinks
Type
SK 120 75 SK 150 62 SK 200 80 SK 200 125 SK 200 160 SK 300 62 SK 320 240
Dimensions (mm)
150 x 75 x 40 150 x 62 x 75 200 x 80 x 85 200 x 125 x 75 200 x 160 x 85 300 x 62 x 75 320 x 240 x 85
Material
aluminium, black anodized aluminium aluminium aluminium aluminium aluminium aluminium
Supply voltage
+12 V DC +12 V DC +24 V DC +12 V DC +12 V DC +24 V DC +24 V DC
Dimensions (mm)
60 x 60 x 25 60 x 60 x 25 60 x 60 x 25 80 x 80 x 25 80 x 80 x 25 80 x 80 x 25 80 x 80 x 25
117
http://www.kuhne-electronic.de
2010/2011
General Terms and Conditions of business with commercial customers of Kuhne electronic GmbH
118
E-mail: info@kuhne-electronic.de
We develop and manufacture professional devices for the frequency range 0.1 ... 50 GHz. This includes customer defined amplifiers, mixers, oscillators and systems.
http://www.kuhne-electronic.de