Beruflich Dokumente
Kultur Dokumente
I.D.: 1" (25mm) to 8-5/8" (219mm) Lengths: 6' (1.8m) & 12' (3.65m) ALL: 3' (0.91m)
NEW Ultimate quality Silicone Marine Exhaust & Water hose. #202V Blue Very Hi Temp. [4 to 6 ply polyester reinforcement 350F (177C)] & #202X Red Xtra Hi Temp [4 ply Nomex reinforcement 500F (260C)] dramatically exceeds all standards and lasts up to 6 times longer than black rubber. (SAE J2006, ABYC and NMMA) Stds.** (see below). See Marine Wet Exhaust Systems Catalog. ISO 13363 Std. Pending. 10 YEAR WARRANTY
Blue
I.D.: 1" (25mm) to 8-5/8" (219mm) Coils: 60' (18.28m) Lengths: 6' (1.8m) & 12' (3.65m) ALL: 3' (0.91m)
Trident Blue Corra-Sil Marine Wet Exhaust & Water Hose (SAE J2006) #252v NEW Ultimate quality Silicone Marine Exhaust & Water hose. #252V Blue Very Hi Temp. [4 to 6 ply polyester reinforcement 350F (177C)] dramatically exceeds all standards and lasts up to 6 times longer than black rubber. (SAE J2006, ABYC and NMMA) Stds.** (see below). See Marine Wet Exhaust Systems Catalog. ISO 13363 Std. Pending. 10 YEAR WARRANTY
I.D.: 1" (25mm) to 4" (102mm) Coils: 50' (15m) Lengths: 12.5' (3.8m) & 6.5' (1.9m)
Premium corrugated marine wet exhaust hose for longer connections with substantial bends. Thick tube and cover with helix between 2 ply reinforcement. Exceptional flexibility and bend radius. Resists heat, ozone, exhaust fumes, panting and collapse. Exceeds New (SAE J2006, ABYC and NMMA) Stds.** (see below). Black High Temp EDPM Rubber 250F (121C). 5 YEAR WARRANTY
Premium wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain,
I.D.: 1/2" (13mm) to 4" (102mm) Coils: 50' (15m) Lengths: 12.5' (3.8m) & 6.5' (1.9m)
scupper bilge & sanitation uses. Extra heavy tube and cover with helix between 2 ply reinforcement provides excellent flexibility and bend radius. Resists heat, ozone, exhaust, sani chemicals, panting and collapse. Exceeds New (SAE J2006, ABYC and NMMA) Stds.** (see below). Black High Temp EDPM Rubber 250F (121C). 5 YEAR WARRANTY
I.D.: 1/2" (13mm) to 2.5" (63.5mm) Coils: 50' (15m) Lengths: 12.5' (3.8m) & 6.5' (1.9m)
Premium marine wet exhaust hose for short, straight connections. In smaller I.D.'s for critical engine coolant & circulation, heat exchanger and discharge uses. Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals. Exceeds New (SAE J2006, ABYC and NMMA) Stds.** (see below). Black High Temp EDPM Rubber 250F (121C). 5 YEAR WARRANTY
131V Ultimate Silicone Heater Hose- Very Hi Temp Blue with Red Tube provides much greater temperature range and service life (up to 6 times longer) than standard EDPM rubber #130 Heater Hose. Both are 2 spiral polyester reinforced with similiar working pressure for engine coolant water, A/C and other midpressure water applications. #131V (VHT-Blue): 45 to 75PSI (0.31 to 0.52Mpa) WP 350F (177C) SAE J20R3, Class 1 & J20P3. 7 Year Warranty. #130 (Standard Black): 50PSI (0.34Mpa) WP 212F (100C) SAE J20R3. 2 Year Warranty.
Blue(131V): 300' (90m) to 175' (53m) Coils 50' (15m) to 25' (7.6m) Boxes Black(130): 500' (150m) - 450' (140m) Reels 50' (15m) Boxed
Cost effective, Hi Temp, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat; and serve a variety of boat and plant pressurized applications (water & air delivery). #132: 2 spiral, 200PSI (1.38Mpa) WP. #134: 4 spiral, heavy wall and better bend radius and working pressure - 300PSI (2.1Mpa) WP. Operating
temperature -40 to 212F (-40 to 100C). #134 serves below water line intake and discharge applications (A/C, Eng, Sani) etc. 2-3 YEAR WARRANTY
**Wet exhaust hose connections: recommend double clamping with stainless steel T-bolt or ConstantTorque clamps. Nomex is a trademark of e.i DuPont.