Beruflich Dokumente
Kultur Dokumente
Trke
Home About Us
Products
Powder Metallurgy
Technical Details
Contact Us
POWDER PREPARATION
http://www.sintek.net/en/powder_metallurgy.html[22.5.2012 15:04:05]
The metallic powders,lubricants and if needed alloying elements are mixed in order to obtain truly homogenous mix. The main goal of using lubricant is to reduce the friction between powder particles and die walls and provide better flow of the powder into the tool.
PRESSING
The various powders are compressed into the tools, which are manufactured from steel or other suitable hard metal, with a pressure related to the final density required for the part. We have 11 mechanical presses from 3 to 100 tons in our pressing department.
SINTERING
Sintering is the production phase during which the component acquires the mechanical characteristics required by its intended use. n sintering process
http://www.sintek.net/en/powder_metallurgy.html[22.5.2012 15:04:05]
the sintering temperature, sintering time and the sintering conditions are the most important parameters.
SIZING
Sizing process is applied to obtain the required specifications of the part. We have 9 hydraulic/mechanical presses from 10 to 50 tons in our sizing department.
http://www.sintek.net/en/powder_metallurgy.html[22.5.2012 15:04:05]
BARRELING
Barrelling is used to remove any burrs still present after the previous production stages by tumbling the parts amongst abrasive stones. n some cases liquid atmospheres which contains abrasive powders are used.
OIL IMPREGNATION
To increase the protection against corrosion and wear resistance oil and other nonmetallic materials are impregnated to the sintered parts
TOZ METALURJ SANAY VE TCARET A..
http://www.sintek.net/en/powder_metallurgy.html[22.5.2012 15:04:05]