Beruflich Dokumente
Kultur Dokumente
Surface Pump-
ing Systems provide versatile, low-maintenance
alternatives to many split-case centrifugal,
positive-displacement and vertical-turbine pump
applications. The SPS is a cost-effective solution
for processing, petroleum, mining, water and other
industries that require high-pressure movement
of fluids. Proven benefits include:
Lowor initial and wnolo-lio oost
Snort oonstruotion load-timo
noroasod roliability and runtimo
Low noiso and vibration lovols
Pomoto monitoring and oontrol
Worldwido support.
Call this number: 281.492.5160.
Or e-mail sps@woodgroup.com.
Manufactured by Wood Group ESP, Inc.
SPS problem ad_CE_half_2-09.indd 1 2/19/09 3:04 PM
Circle 21 on p. 56 or go to adlinks.che.com/23015-21
KNF Neuberger
Focus
32 ChemiCal engineering www.Che.Com June 2009
ums up to 29.8 in. Hg, and maximum
pressures up to 176 psig are possible.
KNF Neuberger, Inc., Trenton, N.J.
www.KNFprocess.com
Metering pump provides precise
control in low-fow applications
The Moyno Metering Pump (photo) is
designed for economical and efficient
performance when metering low-flow
liquids in a wide range of processing
applications. The progressing cavity
design results in a smooth flow, free
from pulsations and variations in ve-
locity and volume, which prevents
material waste or mixture imbalance.
Sealed universal joints offer longer
life, and there are no valves to clog,
stick, or vapor lock. Meanwhile, power
consumption and operating costs are
both said to be low. A wide variety of
materials of construction are available
for units that support pressures up to
300 psi and flowrates from 0.1 to 190
gal/h. The pump is available in bare-
shaft, close-coupled and motorized
configurations. All models are capable
of handling a wide variety of fluids
from clean, clear liquids to abrasive,
corrosive fluids, solids in suspension
and viscous materials. Moyno, Inc.,
Springfield, Ohio
www.moyno.com
Hose pump boasts lower total
cost of ownership
Series LPP pumps incorporate a
unique operating principle that,
among other benefits, offers preferred
energy efficiency. Thanks to the roll-
ing hose contact, no excess friction
and thus, no excess heat, is gener-
ated. In fact, less risk of overheating
means that the LPP pump can pro-
duce the same flow as conventional
hose pumps but with a smaller motor.
Meanwhile, in LPP pumps, hose com-
pression takes place only once during
360 operating cycle, whereas conven-
tional hose pumps compress the hose
two times. This design nearly doubles
the lifetime of the LPP hose, says the
manufacturer. Also, since LPP pumps
cause less friction, they can require as
little as one-fifth the lubricant needed
by other hose pumps. Larox Flow-
sys Oy, Lappeenranta, Finland
www.larox.fi/flowsys
Rebekkah Marshall
Global leader in AODD
pump chemical transfer
Pump range: 6mm ()
through 203 mm (8)
Broadest material offering
in the industry
Pro-Flo X: Most efcient Air
Distribution System (ADS)
in the industry
Superior containment
22069 VAN BUREN STREET GRAND TERRACE, CA 92313-5607
(909) 422-1730 FAX (909) 783-3440
w i l d e n p u m p . c o m
W
IT
H
W
IL
D
E
N
C
H
E
M
IC
A
L
T
R
A
N
S
F
E
R
P
U
M
P
S
www.pumpsg.com
WildenChemicalAd_4.625x7.375.ind1 1 4/30/09 1:44:40 PM
Circle 33 on p. 56 or go to adlinks.che.com/23015-33
Moyno