Beruflich Dokumente
Kultur Dokumente
2008
PURE CRETE
PRODUCT DEFINITION PURE CRETE is a complex non-bacterial concentrated multi-enzymatic formulation that alters the properties of earth materials, providing one of the most cost effective methods to stabilize roads and seal ponds and landfills. PURE CRETE provides additional advantages to road construction companies, adjacent communities and the environment by being a non-toxic, noncorrosive and totally biodegradable product.
A PURE CRETE road is a road with higher hardness properties than a traditional type of road and without the risk of the road being transformed into a Mud Hole, due to wet climatic factors.
PURE CRETE does not require any type of superficial maintenance. It offers Governments the best of both worlds, since one can simply start with the base and at a later date, a layer of asphalt can be added to the road without the requirement of re-doing the road base. It is very important to mention that a road built with the PURE CRETE system can be built to withstand any weight requirements that a road authorities may desire. A PURE CRETE road surpasses any of the present standards as evidence with the poor condition of the roads.
A PURE CRETE road base is 6 to 8 times stronger than that of any traditional rock and gravel road base.
PURE CRETE
Quick and easy, maximum 3 days to build one kilometer of road
the amount of water that is required to reach the optimum level of humidity of the soil, due to the rapid penetration of the humidity and the decreasing superficial evaporation.
9. EASY TO USE AND STORE PURE CRETE is sold in a super concentrated form, therefore eliminating bulk storage volume, the tasks of premixing and management of large amounts of materials. It does not corrode equipment. Three 5 gallon containers produce 1.0 kilometres of roads 15 centimetres in depth.
Any Road can be instantly asphalted with PURE CRETE Stabilization System
DOT Classification (US Department of Transport) Non-Hazardous Liquids Class 70. DOT Identification number: Schedule. B Harmonizing Code 1212.20.000
Warranty: Manufacturers Warranty for up to 8 years when application performed by companies certified to apply by the manufacturer.
PURE CRETE
Roads asphalted on the third day, not weeks later
COMPARISON
The PURE CRETE product is an efficient and economical cost effective method of building a road base, at a fraction of the cost and time compared to any competitive traditional method. Historically a road base built with PURE CRETE costs between 40% to 60% less than roads built using traditional methods.
There is a limited number of reliable and economical solutions to the road base problem.
How PURE CRETE Stabilization System compares in price with traditional road construction methods
Pure Crete
Asphalt
Concrete
Materials needed to build a 1 kilometer long by 7.6 meter wide road with PURE CRETE
Road Category Compacted Crust Depth in cm. Liters for 1 km. Gallons for 1 Km Weight pressure (tons)
25.4
58.80 15.53 20 1935 7.6 7,600
30.48
70.56 18.64 40 2323 7.6 7,600
35.56
82.32 21.75 50 2710 7.6 7,600
40.64
94.09 24.85 80 3097 7.6 7,600
The foregoing calculations may have variations between +/- 10%, depending on the soil content.
Besides the construction of roads, the material and engineering method of PURE CRETE for the construction of airports, remote landing strips, as a base for waste and landfill sites, heliports, parking lots, etc. (There are no water leaks to the sub-soil water system)
PURE CRETE
the solution for any type of soil and road base
Basic equipment
REQUIREMENTS
The application process for the PURE CRETE road base is very simple. The basic necessary equipment for a construction crew is composed of: 1. 2. 2 - Grader (Category 14+ ) 2 - Roller (with vibration capacity, 18 to 20 ton weight The weight is very important to achieve the maximum compacting results.
3.
4. 5.
Potential markets
Existing secondary or feeder roads built with dirt, gravel and sand that are in disrepair. These roads may be built simply by using the PURE CRETE road base system, with several finish layer options which are: asphalt layer or Chip Coat or Chip Seal. The objective of the PURE CRETE solution is to offer significant cost savings to the State or to private customers, offering a first class solution, which not only represents an enormous savings on the direct road construction costs, but also and most notably huge savings related to maintenance issues. And last, the time of construction is but a fraction of the time that is required by conventional methods.
Potential Markets
Paved Roads: PURE CRETE offers various solutions. The first is the simple construction of the road base with PURE CRETE and afterwards the application of CHIP SEAL or CHIP COAT for the final finish layer. The second option is the application of an asphalt finish layer. An asphalt mixing plant (Which PURE CRETE will install at no cost, if there are sufficient State guarantees for the contracting to supply asphalt for the roads by the Government). Asphalt will be supplied for the lowest price possible.
Difference in results
CONSTRUCTION of 1 KM in 3 Days of PURE CRETE finish. 4 to 5 Days with Asphalt finish cap
Natural enzymes from PURE CRETE practically transform soil into a cement like compound
AYR LOGISTICS LIMITED 459 Chippendale Drive Rockwall, Texas 75032, USA Phillip R. Harris President & General Manager Tel: US 972 722 8268 Fax: US 972 722 3540 E-Mail - ayrlog@yahoo.com Exclusive Distributors of Pure-Crete for South Sudan, Etipia y Mozambique.
thousand Birr