Beruflich Dokumente
Kultur Dokumente
GE Energy Rentals
A Power Systems Business
September, 2000
GE Energy Rentals
GE Proprietary Information
Capable of operating on gas or liquid fuels at 60 Hz or 50 Hz and 42 ppm NOx w/ water injection (25 ppm on gas fuel) 36.7% efficient w/ heat rate of 9,280 BTU/KWH, LHV (60 Hz)
GE Proprietary Information
TM2500 Features
First of its size class Proven reliability Fuel Flexibility
Natural gas Diesel Naphtha
26.0
60 Hz - Gas Fuel With Water Injection to 42 ppm
MW @ Generator Terminals
Quick set-up / tear down Small footprint Emissions as low as 25 ppmv Easy to operate / maintain Applications
Peak shaving Industrial base load Plant shutdowns / maintenance Natural disasters / emergencies
-40
-30
-20
-10
10
19
30
40
50
59
70
80
90
100
110
GE Proprietary Information
Exhaust Trailer
48-0 69-4
Turbine Generator Trailer 4-3 8-6 Inlet Filter Trailer 7-3 Auxiliary Trailer Inlet Air Flow 48-0 52-4 GE Proprietary Information 8-6 9-11
Combustor
Output Shaft
Power Turbine
GE Proprietary Information
Inlet Trailer
Includes:
Main Engine Air Filters GT Enclosure Air Filters / Fans Heating & Cooling provisions Weight = 45,000 lbs. Dimensions = L 48 x W 8-6 x H 13 6
Multi-stage inlet air filtration for gas turbine and enclosure ventilation air
Panel-type pre-filter and final barrier filter
Pressure switch for alarm (5 H2O) and shutdown (8 H2O) for excessive pressure drop
Nominal air flow 150,000 CFM (120,000 turbine / 30,000 enclosure ventilation)
Average inlet velocity is 4 m/s
Heating/cooling connections allow for inlet air heating or cooling Inlet air silencing Access doors and lighting for inspection and service
GE Proprietary Information
Exhaust Trailer
Includes:
Exhaust Silencers Turning vanes Weight = 47,000 lbs. Dimensions = L 48 x W 8 6 x H 13 6
Turbine exhaust gases turned and directed into the exhaust trailer by turbine enclosure exhaust duct Exhaust trailer directs hot exhaust gases upward
Stack height 20 fully assembled
Stack outlet dimensions 100.5 x 119.5
Flow 490,000-550,000 pph Temperature 980-1,000 deg. F Silencers located in horizontal transition piece
GE Proprietary Information
Auxiliary Trailer
Includes:
Lube Oil Skid, Hydraulic Skid, Fuel Control, Water Wash Skid, Control System, Battery Room, Main Circuit Breaker, Transformer, Gen. Cooling Air Duct Weight = 65,000 Dimensions = L 48 x W 8 6 x H 13 6
Contains control system components, and all auxiliary systems Advanced control system and Ethernet connection allows for desktop PC control of entire start cycle and auto-synchronization Multiple units can be brought on line simultaneously Units are equipped with remote monitoring and diagnostics capability
GE Proprietary Information
Suitable ground grid and lightning protection Customer responsible to supply natural gas at 375 (+/- 20) PSIG at a rate of 12,000 pph (200 mmbtu/hr or 6 mscf/day) Must conform to GE Specification MID-TD-0000-1 (Natural Gas Fuel for GE Aircraft Derivative Gas Turbines in Industrial Applications) Customer responsible to supply liquid fuel at 30 (+/- 10) PSIG, up to 40 GPM (max.) Must conform to GE Specification MID-TD0000-2 If desired, customer responsible to supply demineralized water at 15 PSIG (min.) up to 28 GPM (max.) Must conform to GE Specification MID-TD0000-3 Suitable foundation in a secure location GE Proprietary Information
Foundation
Interface Connections
Quick disconnect lines between trailers All lines neatly stowed and preconnected where possible
Natural Gas Supply Liquid Fuel Return Water Inj. Inlet Water Inj. Return Liquid Fuel Supply
Designed for 3-day set-up where infrastructure is in place Drawings and detailed requirements allow for site preparation in advance of genset arrival
GE Proprietary Information
Fuel, water, electrical connections all tie into Aux Trailers Low elevation profile (20 ft. max. height)
Demin Water Supply 3 x Electric Gas Compressors + Control Skid Natural Gas Supply
GE Proprietary Information