Beruflich Dokumente
Kultur Dokumente
ms_office
Security Level:
http://www.huawei.com support@huawei.com
Notice
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
6/9/2013
Page1of316
150682621.xls.ms_office
Security Level:
Purpose
This document provides information about the BSC6900 parameters, including the meaning, value, and usage of the parameters.
Intended Audience
Network planners Field engineers System engineers Shift operators
Organization
Each parameter is described in the following aspects. Description Parameter ID Parameter Name NE MML Command Meaning Feature ID Feature Name Value Type GUI Value Range Actual Value Range Unit Default Value Recommended Value Impact Parameter Relationship Access Service Interrupted After Modification Interruption Scope Interruption Duration (min) Caution Validation of Modification Impact on Radio Network Performance Introduced in Version Attribute Remarks Simple string for identifying a parameter Full name of the parameter NEs on which the parameter is set Commands for setting the parameter, and optional/mandatory attribute of the parameter in each command Functions, functioning ways, and protocols of the parameter Relevant feature ID Features using the parameter Parameter value type Parameter value range displayed on the GUI Actual parameter value range corresponding to the GUI Value Range. For example, the GUI Value Range is 0, and the corresponding Actual Value Range is OFF. Parameter value unit Initial value provided by the system Values recommended in different scenarios Parameter impact scope, that is, objects specified when the parameter is set Relationship between this parameter and other parameters. For example, to use this parameter, you need to set related switches and parameters. Whether this parameter is read/write or read only Whether modifying the parameter value may interrupt the existing services Possible interruption scope in the case that modifying the parameter value may interrupt the existing services Possible interruption duration in the case that modifying the parameter value may interrupt the existing services Cautions to be taken during the modification Requirements on how to validate the modification of the parameter. For example, you may need to reset the device to validate the modification. Impact of the radio parameter on the network performance Version in which this parameter is introduced Whether this parameter is a radio parameter, a transport parameter, or an equipment parameter
6/9/2013
Page2of316
150682621.xls.ms_office
Security Level:
NE
SRN
Subrack No.
BSC6900
MML Command Meaning SWP BRD(Mandatory) STR BKP(Mandatory) CMP BRDAREA(Optio nal) ULD LOGTOOMU(M andatory) STR CPUUSAGETST (Mandatory) ULD RSTINFO(Mand atory) ADD BRD(Mandatory) SET PWRPARA(Man datory) SET FANSPEED(Man datory) SET SCUPORT(Mand atory) ADD EMU(Mandatory) SET ALMPORT(Man datory) DLD Number of TCFILE(Mandat the subrack
Feature ID
Feature Name
Value Type GUI Value Range Actual Value Range Unit Default Value Recommended Value Impact Parameter Relationship
Access Service Interrupted After Modification Interruption Scope Interruption Duration(Min) Caution
MRFD210301
Configuration Management
0~11
None None
None
None
None
Not involved
Not involved
None
Equipme nt
BSC6900
ADD BTS(Optional)
Whether to enable the BTS to support bypass. HDLC and IP BTS is not support this GBFDparameter. 116601 Whether to permit Abis flow control. The flow control function acts on call management. If congestion occurs to the system, the system lightens its load by rejecting some services or prolonging the time for service requests. The Abis flow control is used to lighten the system load brought by GBFDAbis flows. 111705
Abis Bypass
Enumeration Type
TRUE, FALSE
None
FALSE
FALSE
BTS
None
BTS
None
Equipme nt
ABISFCEN
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
Used together with "Abis Flow Control Timer 2" to control the change of cell flow control levels.When the flow control level in the cell changes, the values of MS MAX Retrans and Txinteger in the system information are changed accordingly. When the immediate assignment SET fails, the BSCTMR(Option BSC starts GBFDal) T1 and T2. 111705 Used together with "Abis Flow Control Timer 1" to control the change of cell flow control levels.When the flow control level in the cell changes, the values of MS MAX Retrans and Txinteger in the system information are changed accordingly. When the immediate assignment SET fails, the BSCTMR(Option BSC starts al) T1 and T2. Threshold for enabling the BTS local switching. When the congestion rate at the Abis interface exceeds this threshold, the BTS local SET switching is BSSLS(Optional) enabled. Whether the BSC prioritizes half rate channels to MSs according to the Abis resource load in the case of Abis resource shortage. If the parameter is set to yes, when the Abis resource load is higher than "Flex Abis Prior Choose Abis Load Thred" or "Fix Abis Prior Choose Abis Load Thred" in "SET GCELLCHM SET GAD", the GCELLCCBASI BSC C(Optional) prioritizes This parameter specifies whether to enable the Abis resource adjustment TCHH function. This parameter specifies whether the TCHH is preferentially allocated to the MS by the BSC when Abis resources are insufficient. If the Abis resource load is greater than "Flex Abis Prior Choose Load Thred" or "Fix Abis SET Prior Choose BTSFLEXABISP Abis Load ARA(Optional) Thred" when
10~255
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111705
10~255
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD117702
0~100
per cent
None
BSC69 90 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD112013
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD117301
Flex Abis
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
NO
BTS
None
Not involved
Not involved
None
Radio
6/9/2013
Page3of316
150682621.xls.ms_office
Security Level:
ABISTSFRE ETM
Duration between Abis timeslot emptiness and Abis timeslot release. When channels are idle, the timer is started. When the timer is expired, the Abis timeslot is released. When all the TBFs on the channel are released, the Abis timeslot is not released at once. Instead, the timer is started when the channels are idle. Before the timer expires, if new service GBFDrequest is 113101
10~3600
None
15 Cell
None
Not involved
Not involved
None
Radio
AbisVer
Phase tag for GSM protocols SET that the Abis BSCBASIC(Opti interface MRFDonal) supports 210301 Duration for the BTS to collect the AB after the ADD TRX or AISSCFG(Optio channel is nal) activated. Mean opinion score (threshold) for judging an abnormal call. The BTS computes the MOS of a call periodically and reports the call MOS to the BSC in custom measurement reports. According to the call MOS, the BSC checks whether the call is normal. If the call MOS is less than this threshold, the BSC considers the call abnormal and records the abnormity SET in the call OTHSOFTPARA history (Optional) record Access pulse type of the PRACH, uplink PTCCH and packet control acknowledge message of the MS. 8bit: 8 bit pulse access mode; 11bit: SET 11 bit pulse GCELLPSBASE( access Optional) mode. SET Access GCELLPRACH( control class Optional) of the MS. Subcell preferred during the incoming inter-BSC handover to the concentric cell. In the case of incoming inter-BSC handover to the concentric cell, the channels in SET this subcell GCELLHOIUO( are Optional) preferred.
Configuration Management
Enumeration Type
GSM_PHASE_2
The value of this parameter is the same as those of "Um BSC69 Interface Tag" and "A 00 Interface Tag".
Not involved
Not involved
None
Radio
ABLASTTIM E
GBFD118201
SoftSynchronized Network
1~255
None
40
BSC69 40 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
BSC6900
GBFD116801
0~250
None None
Not involved
Not involved
If this paramete r is set too high, a normal voice may be consider ed abnormal . If this paramete r is set too low, an abnormal voice may not be The parameter modification consider has no impact on the ed. equipment. None
Equipme nt
GBFD119110 GBFD119110
Access
Enumeration Type
8BIT(8BIT), 11BIT(11BIT)
8BIT, 11BIT
None None
8BIT
Cell
None
Not involved
Not involved
None
BSC6900
Access
0~65535
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
ACCESSOP TILAY
BSC6900
GBFD113201
None None
Usubcell
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
Radio
BSC6900
Whether the initial service is uplink, downlink, or neutral. 0: The initial service is uplink priority; 1: The initial service is downlink SET priority; GCELLPSOTHE 2: The initial RPARA(Optional service is GBFD) neutral. 119501 Access flow control threshold. When the average CPU usage of sliding windows exceeds the SET threshold, AC FCCPUTHD(Opti flow control WRFDonal) is triggered. 040100 Access packet queue usage threshold. When the average packet queue usage of sliding windows exceeds the SET threshold, AC FCMSGQTHD(O flow control WRFDptional) is triggered. 040100 If this parameter is set to ENABLE, which is used to enable the function of the address and control area compression. If it is set to DISABLE, which is used ADD to disable the PPPLNK(Option function of al) the address GBFDADD and control 118611 MPLNK(Optional area GBFD) compression. 118622 Whether to ADD BTSPPPLNK(Op tional) ADD BTSMPLNK(Opti onal) support compression flag bit for the address and control GBFDfield 118611
0~2
None None
1 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The throughput is affected.
Radio
ACCTHD
AC control threshold
BSC6900
Flow Control
30~100
per cent
None
80 Board
None
Not involved
Not involved
None
Equipme nt
ACCTHD
AC control threshold
BSC6900
Flow Control
30~100
per cent
None
75 Board
None
Not involved
Not involved
None
Equipme nt
ACFC
BSC6900
Enumeration Type
None Enable
Enable
PPP link
None
Not involved
Not involved
None
Transpor t
ACFC
BSC6900
Enumeration Type
Disable, Enable
Disable, Enable
None Enable
Enable
BTS
None
PPP link
None
None
Transpor t
6/9/2013
Page4of316
150682621.xls.ms_office
Security Level:
This parameter specifies whether to receive the CS paging request from A interface when the MS uses a PS service. This parameter is used to control the paging collaboration function of A interface of the entire BSC. This parameter specifies whether to forward the paging message of the A interface from the circuit domain to the SET PS domain BSCPSSOFTPA (the RA(Optional) forwarded None Access flow control recovery threshold. When the average CPU usage of sliding windows is lower than the threshold, SET AC flow FCCPUTHD(Opti control is WRFDonal) stopped. 040100 Access packet recovery threshold. When the average packet queue usage of sliding windows is lower than the threshold, SET AC flow FCMSGQTHD(O control is ptional) stopped. Used for notifying MSs where they retrieve relevant cell reselection parameters during cell reselection. The value of this parameter is 0 in system message 3, without any meaning. In system message 4, the value 0 of this parameter means MSs must retrieve the PI parameters and other parameters relevant to cell reselection and the SET parameters GCELLIDLEAD( relevant to Optional) C2 Whether to SET control AC FCSW(Optional) flow
None
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
CLOSE
BSC
None
Not involved
Not involved
This paramete r is valid only when "BSSPA GINGCO ORDINA TION" in "SET GCELLP SBASE" The parameter modification is set to has no impact on the YES. equipment. None
Radio
ACRTHD
AC restore threshold
BSC6900
Flow Control
30~100
per cent
None
70 Board
None
Not involved
Not involved
None
Equipme nt
ACRTHD
AC restore threshold
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
65 Board
None
Not involved
Not involved
None
Equipme nt
ACS
BSC6900
GBFD110402 WRFD040100
None None
FLEX
Cell
None
Not involved
Not involved
ACSW
AC control switch
BSC6900
Flow Control
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
BSC6900
Active coding set (ACS)[F], indicating a set of full rate coding rates currently available for calls. The AMR is a set of multiple speech SET coding and GCELLCCAMR( decoding GBFDOptional) rates. 115501
AMR FR
None None
None
Cell
None
Not involved
Not involved
BSC6900
Active coding set (ACS)[H], indicating a set of half rate coding rates currently available for calls. The AMR is a set of multiple speech SET coding and GCELLCCAMR( decoding GBFDOptional) rates. 115502
AMR HR
None None
None
Cell
None
Not involved
Not involved
ACTCDSET WB
AMR ACS[WB]
BSC6900
Active coding set (ACS)[WB], indicating a set of wideband coding rates currently available for calls. The AMR is a set of multiple speech SET coding and GCELLCCAMR( decoding GBFDOptional) rates. 115507
WB AMR
0~7
None None
7 Cell
None
Not involved
Not involved
ACS is usually set to 0 because system informati on 7 and 8 message s are seldom used in common cells. ACS should be set to 1 if system informati on 7 and 8 message s are used in a cell and C2 is used for cell The parameter modification reselecti has no impact on the on. equipment. The parameter modification has no impact on the None equipment. The number of the chosen data rates must be from one to four. If this paramete r involves only one full rate coding rate, the value of "AMR Starting Mode[F]" can be 0 only; all the adjustabl e threshold s and hysteresi s of AMR coding rate make no The parameter modification sense. has no impact on the If this equipment. The number of the chosen data rates must be from one to four. If this paramete r involves only one half rate coding rate, the value of "AMR Starting Mode[H]" can be 0 only; all the adjustabl e threshold s and hysteresi s of AMR coding rate make no The parameter modification sense. has no impact on the If this equipment. The number of the chosen data rates must be from one to three. If this paramete r involves only one coding rate, the value of "AMR Starting Mode[W B]" can be 0 only; all the adjustabl e threshold s and hysteresi s of AMR coding rate make no The parameter modification sense. has no impact on the If this equipment.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
None
Radio
Radio
Radio
6/9/2013
Page5of316
150682621.xls.ms_office
Security Level:
ACTGENE
Active Gene
BSC6900
This parameter is contained in an assignment request along with the requested bandwidth. The bandwidth actually allocated to a user is the value obtained through multiplying the requested bandwidth by ADD the value of GCELL(Optional this GBFD) parameter. 118601 Whether to activate the function of L2 reestablishmen t. If this function is activated, the BSC starts the attempt of L2 reestablishmen t when the BSC receives an ERR IND message reported by the BTS in a conversation of MSs. If the L2 reestablishmen t succeeds, the conversation continues; otherwise, a call drop GBFDoccurs. Valid duration 110501 of the reserved TRX or timeslot. Increased CPU usage
Abis over IP
None
5 Cell
None
Not involved
Not involved
The larger value this paramete r is set to, the higher the bandwidt h occupied by The parameter modification services has no impact on the is. equipment. None
Transpor t
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
ACTTIME
BSC6900
GBFD118201 MRFD210301
1~255
10
BSC69 10 00 None
Not involved
Not involved
None.
Radio Equipme nt
ACU
BSC6900
1~95
None
None
Board
None
Board
None
ACVLTHD
BSC6900
AC voltage alarm lower threshold. When the input AC voltage is lower than the value of this parameter, an alarm indicating the abnormal AC is reported. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202
O&M of BTS
60~300
None
180 BTS
The value of this parameter must be smaller than "AC Voltage Read & Upper Threshold". Write
Not involved
Not involved
None
Equipme nt
BSC6900
The BTS reports an alarm if the AC voltage SET exceeds the BTSDPMUBP(O value of this ptional) parameter.
GBFD111202
O&M of BTS
None
2800 BTS
The value of this parameter must be greater than "AC undervoltage alarm threshold".
Not involved
Not involved
None
Equipme nt
BSC6900
The BTS reports an alarm if the AC voltage is lower than SET the value of BTSDPMUBP(O this GBFDptional) parameter. 111202 The BTS reports an alarm if the AC voltage exceeds the value of thAC voltage alarm upper threshold. When the input AC voltage is higher than the value of this parameter, an alarm indicating the abnormal AC is reported.is parameter. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202 Whether to hand over a MS to another channel during an intra-cell handover through the assignment process The APMU board supports 8 Boolean alarms. This parameter consists of 8 bits, each of which indicates whether the correspondin g alarm is enabled or not. The bit value 0 indicates that the alarm is enabled, and the bit value 1 indicates that the alarm is disabled. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter
O&M of BTS
None
1800 BTS
The value of this parameter must be smaller than "AC overvoltage alarm threshold".
Not involved
Not involved
None
Equipme nt
ACVUTHD
BSC6900
O&M of BTS
60~300
None
280 BTS
The value of this parameter must be greater than "AC Voltage Read & Lower Threshold". Write
Not involved
Not involved
None
Equipme nt
ADAPTASSI GNMENTFL OW
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
The switching from an intra-cell handover The parameter modification procedure to an assignment procedure has no impact on the shortens the duration of the intra-cell equipment. handover.
Radio
ADC
BSC6900
MRFD210304
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page6of316
150682621.xls.ms_office
Security Level:
ADC
BSC6900
ADDR
Communication Address
BSC6900
SET BTSFMUABP(O ptional) SET BTSAPMUBP(O ptional) SET BTSDATUBP(Op tional) SET BTSDEMUBP(O ptional) SET BTSDHEUBP(Op tional)
The DPMU board supports seven Boolean alarms. This parameter consists of seven bits, each of which indicates whether the correspondin g alarm is enabled or not. The bit value 0 indicates that the alarm is enabled, and the bit value 1 indicates that the alarm is disabled. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the Communicati on address of the CBUS3 on the bus 485. The configuration of this parameter must be consistent with the actual physical connection. Otherwise, the board may not work properly.
MRFD210304
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
GBFD111202
O&M of BTS
0~254
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
Interval for requesting the secondary SET link in the BSCPSSOFTPA congestion RA(Optional) state.
GBFD111705
0~50
ms
None
10 BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
Secondary link bandwidth that is requested each time in SET the BSCPSSOFTPA congestion GBFDRA(Optional) state. 111705 The destination signaling ADD point (DSP) EXTNCELL(Man of the datory) adjacent COL BSC must be BSCSYNCINFO( an Iur-g GBFDMandatory) DSP. 111804 SET BTSEXCURSIO N(Mandatory) SET BSCSYNCOFF( Mandatory) Whether to adjust the BTS offset manually or automatically GBFD. 118201 Mode of dynamically adjusting the EGPRS uplink encoding scheme. Value 0 indicates dynamic adjustment of EDGE uplink coding scheme is not supported; value 1 indicates that the uplink coding scheme is adjusted according to the downlink signal quality in the DownLink ACK message; value 2 indicates that SET the uplink GCELLEGPRSP coding GBFDARA(Optional) scheme is 119204 Whether to enable the function of automatically downloading SET and BTSAUTODLDA activating the CTINFO(Optiona BTS l) software Automatic downloading mode of the BTS. If the parameter is set to 0, common downloading is performed through the OML/EML. If the parameter is set to 1, besides the downloading through the OML/EML, the downloading through dynamically extending the link bandwidth can also be performed. In this case, the cell traffic of the BTS is SET not reserved. BTSAUTODLDA If the CTINFO(Optiona parameter is l) set to 2,
0~768
None None
2 BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
1~16777215
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Transpor t
ADJMODE
Adjustment Mode
BSC6900
SoftSynchronized Network
Enumeration Type
BYMANUAL, BYAUTO
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
BSC6900
Enumeration Type
0(Not support dynamic adjustment), 1(According to the dl signal quality in the DL ACK), 2(According to the bit error rate reported by the BTS)
0, 1, 2
None None
1 Cell
None
Not involved
Not involved
None
Radio
ADLDACT
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
ADMODE
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
COMMON_DLD( Common Download), QUICK_DLD1(Q uick Download No Traffic), QUICK_DLD2(Q COMMON_DLD, uick Download QUICK_DLD1, Reserve BCCH) QUICK_DLD2 LOCK(Lock), UNLOCK(Unlock) , SHUTDOWN(Shu Lock, Unlock, tdown) Shutdown
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
ADMSTAT
Administrative State
BSC6900
O&M of BTS
Enumeration Type
None None
Unlock
Cell
None
Cell
The services are disrupted until this parameter is set to Unlock. None
Equipme nt
ADMSTAT
Administrative State
BSC6900
O&M of BTS
Enumeration Type
None None
None
TRX
None
If the value of this parameter is modified to "Lock", forced handover is triggered to hand the ongoing services on the corresponding TRX to another TRX. Services will be disrupted if the handover fails. If the value of this parameter is modified to "Shutdown", the ongoing services are not affected but new service accesses are not allowed. TRX If the value of this parameter is modified to "Lock", forced handover is triggered to hand the ongoing services on the corresponding channel to another channel. Services will be disrupted if the handover fails. If the value of this parameter is modified to "Shutdown", the ongoing services are not affected but new service accesses are not allowed. Channel
Services will be disrupted until the value of this parameter is changed to "Unlock".
None
Equipme nt
ADMSTAT
ADTET
BSC6900
BSC6900
Administrativ e state of the channel End time for adjusting the offset time.
GBFD111202 GBFD118201
None None
None
Services will be disrupted until the value of this parameter is changed to "Unlock".
None
hour, min
None None
None
Not involved
Not involved
None.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
BSC6900 V900R011
Radio
ADTLOD
BSC6900
ADTON
ADTST
Offset Time Adjustment Switch BSC6900 Offset Time Adjustment Start Time BSC6900
BSC6900
Cell load threshold for adjusting the offset time. If the load threshold is exceeded, ADD the offset AISSCFG(Optio time is not nal) adjusted. ADD Offset Time AISSCFG(Mand Adjustment atory) Switch. ADD Start time for AISSCFG(Optio adjusting the nal) offset time. Advanced ADD alarm BTSALMMGMR management ULE(Mandatory) rule type
0~100
None
10 None
Not involved
Not involved
None.
None None
None
Not involved
Not involved
None.
hour, min
None None
None
Not involved
Not involved
None.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
MRFD210304
Faulty Management
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page7of316
150682621.xls.ms_office
Security Level:
ADVER1
BSC6900
ADVER2
BSC6900
BTS software version 1 for SET automatically BTSAUTODLDA downloading CTINFO(Optiona and GBFDl) activating the 111202 BTS software version 2 for SET automatically BTSAUTODLDA downloading CTINFO(Optiona and GBFDl) activating the 111202 If the echo path is traced, the echo is judged and controlled according to the trace result of the echo path parameters. Otherwise, the echo is judged and controlled according to SET the TCPARA(Option recommende al) d value. This parameter is used for echo judgment and control when the echo SET parameters TCPARA(Option are not al) traced.
O&M of BTS
String Type
None
1~51 characters
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
O&M of BTS
String Type
None
1~51 characters
None None
None
BTS
This parameter can be configured only when "BTS Software Version 1" is configured.
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
GBFD115602
0~600
ms
None
400 Board
None
Not involved
Not involved
None
None
Equipme nt
AEC_Echo_ Return_Loss
BSC6900
GBFD115602
0~60
dB
None
20 Board
None
Not involved
Not involved
None
None
Equipme nt
BSC6900
If the local input voltage is lower than the value of this parameter and the remote end transmits the voice signal, the AEC function uses the comfort noise to replace the minor echo. In this case, the speech SET signals at low TCPARA(Option level may GBFDal) also be cut. 115602 Extra delay due to the transmission line. This parameter should be set according to the actual conditions and is SET applicable to TCPARA(Option satellite GBFDal) transmission. 115602 This parameter is used to determine whether there are speech signals on the local end. If the local SNR is lower than the value of this parameter, SET echo control TCPARA(Option is not GBFDal) performed. 115602 This parameter indicates the acoustic echo cancellation (AEC) functional switch is SET switched on TCPARA(Option or switched al) off.
-60~-35, 0
dBm None
-48 Board
None
Not involved
Not involved
None
None
Equipme nt
BSC6900
0~1000
ms
None
0 Board
None
Not involved
Not involved
None
None
Equipme nt
BSC6900
0~15
dB
None
6 Board
None
Not involved
Not involved
None
None
Equipme nt
AEC_Switch
AEC Switch
BSC6900
GBFD115602
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
CLOSE
Board
None If the number of echo cancellations performed by AEC exceeds "AEC Detect Threshold" within the time specified by "AEC Detect Time", the TFO is closed forcibly. If the number of echo cancellations performed by AEC exceeds "AEC Detect Threshold" within the time specified by "AEC Detect Time", the TFO is closed forcibly.
Not involved
Not involved
None
If this parameter is set to OPEN, the acoustic echo can be cancelled to improve the speech quality.
Equipme nt
AECDetectT hreshold
BSC6900
Threshold for SET detecting the TCPARA(Option AEC GBFDal) performance 115602
10~100
None None
90 Board
Not involved
Not involved
None
None
BSC6900 V900R011
Equipme nt
BSC6900
Time for SET detecting the TCPARA(Option AEC GBFDal) performance 115602
1~10
None
4 Board
Not involved
Not involved
BSC6900
Counter of radio link failures during an AMR full rate call. See the description of "Radio Link Timeout" in "SET GCELLCCBA GBFDSIC". 115505
Enumeration Type
4_Times, 8_Times, 12_Times, 16_Times, 20_Times, 24_Times, 28_Times, 32_Times, 36_Times, 40_Times, 44_Times, 48_Times, 52_Times, 56_Times, 60_Times, 64_Times
4_Times, 8_Times, 12_Times, 16_Times, 20_Times, 24_Times, 28_Times, 32_Times, 36_Times, 40_Times, 44_Times, 48_Times, 52_Times, 56_Times, 60_Times, 64_Times, step: SACCH period
ms
None
64_Times
Cell
None
Not involved
Not involved
Number of SACCH multiframes during an AMR full rate call. See the description of "SACCH MultiFrames" in "SET GCELLCCBA GBFDSIC". 115505
ms
None
48 Cell
None
Not involved
Not involved
None With a good antiinterferen ce capability , AMR codes can support a lower carrier-tointerferen ce ratio than nonAMR codes in a same FER. When the AMR is enabled, the voice quality improves . In this case, the value of this paramete r can be a little larger than that of "Radio With a good antiinterferen ce capability , AMR codes can support a lower carrier-tointerferen ce ratio than nonAMR codes in a same FER. When the AMR is enabled, the voice quality improves . In this case, the value of this paramete r can be a little larger than that of
None
BSC6900 V900R011
Equipme nt
If this parameter is set to higher value, The parameter modification channel resources may be wasted; if this has no impact on the parameter is set to lower value, the call equipment. drop rate may increase.
Radio
If this parameter is set to higher value, The parameter modification channel resources may be wasted; if this has no impact on the parameter is set to lower value, the call equipment. drop rate may increase.
Radio
6/9/2013
Page8of316
150682621.xls.ms_office
Security Level:
BSC6900
Counter of radio link failures during an AMR half rate call. See the description of "Radio Link Timeout" in "SET GCELLCCBA GBFDSIC". 115505
Enumeration Type
4_Times, 8_Times, 12_Times, 16_Times, 20_Times, 24_Times, 28_Times, 32_Times, 36_Times, 40_Times, 44_Times, 48_Times, 52_Times, 56_Times, 60_Times, 64_Times
4_Times, 8_Times, 12_Times, 16_Times, 20_Times, 24_Times, 28_Times, 32_Times, 36_Times, 40_Times, 44_Times, 48_Times, 52_Times, 56_Times, 60_Times, 64_Times, step: SACCH period
ms
None
52_Times
Cell
None
Not involved
Not involved
AID
Alarm ID
BSC6900
AID
Alarm ID
BSC6900
SET GCELLCCBASI C(Optional) SET ALMPORT(Man datory) SET ALMBLKPARA( Mandatory) SET ALMLVL(Mandat ory) SET ALMSHLD(Mand atory) SET BOXRPT(Manda tory)
Number of SACCH multiframes during an AMR half rate call. See the description of "SACCH MultiFrames" in "SET GCELLCCBA GBFDSIC". 115505 MRFD210304 MRFD210304
ms
None
32 Cell
None
Not involved
Not involved
With a good antiinterferen ce capability , AMR codes can support a lower carrier-tointerferen ce ratio than nonAMR codes in a same FER. When the AMR is enabled, the voice quality improves . In this case, the value of this paramete r can be a little larger than that of "Radio With a good antiinterferen ce capability , AMR codes can support a lower carrier-tointerferen ce ratio than nonAMR codes in a same FER. When the AMR is enabled, the voice quality improves . In this case, the value of this paramete r can be a little larger than that of
If this parameter is set to higher value, The parameter modification channel resources may be wasted; if this has no impact on the parameter is set to lower value, the call equipment. drop rate may increase.
Radio
Alarm ID
65334~65383
None None
None
None
None
Not involved
Not involved
None
Alarm ID
1~65535
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
If this parameter is set to higher value, channel resources may be wasted; if this parameter is set to lower value, the call drop rate may increase.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
None
None
aid
Alarm ID
BSC6900
Identifier of the alarm. This parameter uniquely identifies an alarm. Identifier of the alarm. This parameter uniquely identifies an alarm. Identifier of the alarm. This parameter uniquely identifies an alarm.
MRFD210304
Faulty Management
1~65535
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
AID
Alarm ID
BSC6900
MRFD210304
Faulty Management
1~65535
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
AID
Alarm ID
BSC6900
AID
Alarm ID.
BSC6900
AID
Alarm ID.
BSC6900
SET ENVALMPARA( Mandatory) SET BTSENVALMPO RT(Optional) Alarm ID ADD BTSOBJALMSH LD(Mandatory) Alarm ID
Faulty Management
1~65535
None None
None
RNC
None
Not involved
Not involved
None
65033~65533
None None
None
BTS
None
Not involved
Not involved
None
String Type
None
1~1024 characters
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
BSC6900
AIDST
AIDST
AInterMsgTr ace
BSC6900
Delay time for mutualaid detection on a cell after the cell is initialized. When the cell initialization has just finished, the cell is in an unstable state. Mutualaid detection at this time may cause a mistaken decision. Therefore, this parameter is SET used for GCELLSOFT(O specifying ptional) proper delay. ADD Type of OBJALMSHLD( alarm Optional) selection ADD Alarm BTSOBJALMSH selection LD(Mandatory) mode Whether to trace Ainterface messages during end-toend user tracing. The end-to-end tracing is conducted throughout the network. The Ainterface tracing results can be obtained SET from the OTHSOFTPARA MSC or (Mandatory) BSC.
Interval Type 1~60 1~60 ALL(all), Enumeration ONEBYONE(one Type by one) ALL, ONEBYONE ALL(all), Enumeration ONEBYONE(one Type by one) ALL, ONEBYONE
min
None
15 Cell
None
Not involved
Not involved
None None
None
RNC
None
Not involved
Not involved
None None
None
BTS
None
Not involved
Not involved
If this paramete r is set to a greater value, TRX mutual aid may not be triggered promptly in the case of BCCH TRX failure after a cell has just been initialized. If this paramete r is set to smaller value, mutual aid may be decided The parameter modification mistakenl has no impact on the y. equipment. None The parameter modification has no impact on the None equipment. None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
GBFD116401
NO(No), YES(Yes)
NO, YES
None None
NO
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
Whether to allow flow control for the location update services during the A interface flow GBFDcontrol 111705 whether to allow flow control for the mobileoriginated services during the A interface flow GBFDcontrol 111705 Whether to allow flow control for the mobileterminated services during the A interface flow control Whether to allow flow control for the other services including emergency call, call reestablish, and LMU services during the A interface flow control
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111705
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111705
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Equipme nt
AINTFFCEN
BSC6900
Whether to enable the A interface flow control mechanism in GBFDthe BSC 111705
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
BSC69 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page9of316
150682621.xls.ms_office
Security Level:
BSC6900
Flow control method used by the BSC. Flow control method at the Abis interface: When receiving a channel request message, the BSC begins flow control on the call according to the flow control level of the A interface. Flow control method at the A interface: When establishing an SCCP connection, the BSC begins flow control according to the flow GBFDcontrol level 111705 Rate of discarded services in level 1 of the A interface GBFDflow control 111705 Rate of discarded services in level 2 of the A interface GBFDflow control 111705 Rate of discarded services in level 3 of the A interface GBFDflow control 111705 Rate of discarded services in level 4 of the A interface GBFDflow control 111705 Rate of discarded services in level 5 of the A interface GBFDflow control 111705 Rate of discarded services in level 6 of the A interface flow control Whether to enable the common alarm switches [12]. This parameter consists of two bits, each of which indicates whether the correspondin g Boolean alarm is enabled or not. Whether to enable the common alarm switches [14]. This parameter consists of four bits, each of which indicates whether the correspondin g Boolean alarm is enabled or not. Fixed gain value in fixed gain mode Target level in fixed level mode
Enumeration Type
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
AINTFFCRS RATE1
BSC6900
0~100
per cent
None
BSC69 5 00 None
Not involved
Not involved
None
Equipme nt
AINTFFCRS RATE2
BSC6900
0~100
per cent
None
BSC69 5 00 None
Not involved
Not involved
None
Equipme nt
AINTFFCRS RATE3
BSC6900
0~100
per cent
None
BSC69 5 00 None
Not involved
Not involved
None
Equipme nt
AINTFFCRS RATE4
BSC6900
0~100
per cent
None
BSC69 10 00 None
Not involved
Not involved
None
Equipme nt
AINTFFCRS RATE5
BSC6900
0~100
per cent
None
BSC69 10 00 None
Not involved
Not involved
None
Equipme nt
AINTFFCRS RATE6
BSC6900
GBFD111705
0~100
per cent
None
BSC69 10 00 None
Not involved
Not involved
None
Equipme nt
ALARMENA BLE
BSC6900
MRFD210304
Faulty Management
NO1DISABLE, NO2DISABLE
NO1DISABLE, NO2DISABLE
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
ALARMENA BLEX4
BSC6900
ALC_Fix_Gai n ALC Fix Gain ALC_Fix_Tar ALC Fix Target get_Level Level
BSC6900
BSC6900
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Automatic Level Control (ALC) Interval Type -12~12 Automatic Level Control (ALC) Interval Type -23~-4
-12~12
dB
None
6 Board
None
Not involved
Not involved
None
-23~-4
dBm None
-18 Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The radio link should be reestablished after the parameter modification. None The radio link should be reestablished after the parameter modification. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
BSC6900
ALC_Max_T arget_Level
BSC6900
BSC6900
This parameter restrains the maximum gain to the input signal. It is valid only when "ALC Mode" is "FIXEDLEVE L" or "ADAPTIVE". If the parameter is set to a small value, it may affect the SET conformance TCPARA(Option to the target al) level. Maximum SET target level in TCPARA(Option adaptive ALC al) mode Mimumum SET target level in TCPARA(Option adaptive ALC al) mode
GBFD115601
3~12
dB
None
6 Board
None
Not involved
Not involved
None
The radio link should be reestablished after the parameter modification. The radio link should be reestablished after the parameter modification. The radio link should be reestablished after the parameter modification.
None
Equipme nt
GBFD115601
-23~-4
dBm None
-4 Board
None
Not involved
Not involved
None
None
Equipme nt
GBFD115601
-23~-4
dBm None
-23 Board
None
Not involved
Not involved
None
None
Equipme nt
ALC_Mode
ALC Mode
BSC6900
SET TCPARA(Option ALC level GBFDal) control mode 115601 Whether to enable the SET adaptive level TCPARA(Option control (ALC) al) function Retry times after the timer for the reply from the peer expires during the NSVC live test. If the reply is not received after the system resends the message according to SET retry times, BSCNSPARA(O the NSVC is ptional) regardedof as Duration the timer to wait for the reply from the peer during the NSVC live test.
FIXEDLEVEL(Fix ed level mode), ADAPTIVE(Adap tive mode), FIXEDLEVEL, FIXEDGAIN(Fixe ADAPTIVE, d gain mode) FIXEDGAIN
None None
FIXEDLEVEL
Board
None
Not involved
Not involved
None
None If this parameter is set to OPEN, the voltage level can be adjusted automatically to improve the speech quality.
Equipme nt
ALC_Switch
ALC Switch
BSC6900
GBFD115601
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
CLOSE
Board
None
Not involved
Not involved
None
Equipme nt
ALIVERETR Y
Alive Retry
BSC6900
GBFD510002
Gb Over FR
5~15
None None
5 BSC
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD510002
Gb Over FR
1~255
None
3 BSC
None
Not involved
Not involved
None
Equipme nt
AllBw
BSC6900
ALLOCDIFF TRX
BSC6900
It is the bandwidth when the " transmission resource group type " is IP and the " bandwidth ADD mode " is RSCGRP(Manda HALF_DUPL tory) EX. None Whether to SET reassign the BSCPSSOFTPA TBF for a GBFDRA(Optional) different Trx. 114101
None
0~4000000
kbit/s None
None
When "BWMODE" in "ADD RSCGRP" is set to HALF_DUPLEX, this parameter is valid;if the "BWMODE" in "ADD RSCGRP" of upper class and lower class RSCGRP is set to HALF_DUPLEX, the "AllBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "AllBwE" in "ADD RSCGRP" of lower class RSCGRP;The "AllBw" in "ADD RSCGRP" of upper class Trans RSCGRP can not less mission than the sum of "TxBw" resour and "RxBw" in "ADD ce RSCGRP" of lower class Read & group RSCGRP. Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
GPRS
Enumeration Type
None None
ALLOW
BSC
None
Not involved
Not involved
None
Radio
6/9/2013
Page10of316
150682621.xls.ms_office
Security Level:
BSC6900
When this parameter is set to ON, the GMM/SM signalling service is assigned only one PDCH; otherwise, the GMM/SM signalling service is assigned one or more PDCHs as required. None Maximum
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
percentage of the number of AMR half rate channels in the total number of channels in the cell. If the percentage is equal to or greater than this parameter, no AMR half rate channel can be further assigned. Total number of channels = number of half rate channels + SET number of full GCELLCHMGBA rate channels GBFDSIC(Optional) x2 111005 Whether to allow EDA multiplex. not allow EDA Multiplex: the TBF of the EDA cannot be multiplexed with other TBR; allow EDA Multiplex: the TBF of the EDA can be SET multiplexed BSCPSSOFTPA with other GBFDRA(Optional) TBF. 119401 Number of allowed measure report missed. If the number of allowed measure report missed exceeds this value, the previous SET measure GCELLNC2PAR report is GBFDA(Optional) invalid. 116201 Maximum percentage of the number of half rate channels in the total number of channels in the cell. If the percentage is equal to or greater than this parameter, no half rate channel can be further assigned. Total number of channels = number of half rate channels + SET number of full GCELLCHMGBA rate channels GBFDSIC(Optional) x2 111005 All timeslot types of the E1/T1 of the ADD Pb interface PBE1T1(Optiona is set to CIC l) or NULL.
0~100
per cent
None
100 Cell
The following condition must be met: "ALLOWAMRHALFRATE USERPERC" <= "ALLOWHALFRATEUSE Read & RPERC". Write
Not involved
Not involved
None
Radio
ALLOWEDA DAMULTIPL EX
BSC6900
None None
NOTALLOW
BSC
None
Not involved
Not involved
This paramete r is valid only when "SUPPO RTEDA" is set to The parameter modification SUPPOR has no impact on the T. equipment. None
Radio
BSC6900
0~16
None None
4 Cell
None
Not involved
Not involved
None
Radio
BSC6900
0~100
per cent
None
100 Cell
The following condition must be met: "ALLOWHALFRATEUSE RPERC" >= "ALLOWAMRHALFRATE Read & USERPERC". Write
Not involved
Not involved
None
Radio
BSC6900
GBFD111203
O&M of BSC
Enumeration Type
ALLCIC(Set all Timeslots CIC), ALLNULL(Set all ALLCIC, Timeslots Null) ALLNULL
None ALLCIC
ALLCIC
PBE1T 1 None
Not involved
Not involved
None
Equipme nt
BSC6900
Value ALLCIC indicates that all E1/T1 timeslots on the A interface are of CIC type. Value ALLNULL indicates that all E1/T1 timeslots on ADD the A AE1T1(Mandator interface are GBFDy) of null type. 111803 If the feed current of the TMA on tributary 0 is smaller than the value of this parameter, the TMA Low SET Temperature BTSDATUBP(Op alarm is MRFDtional) triggered. 210304 If the feed current of the TMA on tributary 1 is smaller than the value of this parameter, the TMA Low SET Temperature BTSDATUBP(Op alarm is MRFDtional) triggered. 210304 If the feed current of the TMA on tributary 2 is smaller than the value of this parameter, the TMA Low SET Temperature BTSDATUBP(Op alarm is MRFDtional) triggered. 210304 If the feed current of the TMA on tributary 3 is smaller than the value of this parameter, the TMA Low SET Temperature BTSDATUBP(Op alarm is MRFDtional) triggered. 210304 If the feed current of the TMA on tributary 4 is smaller than the value of this parameter, the TMA Low SET Temperature BTSDATUBP(Op alarm is MRFDtional) triggered. 210304 If the feed current of the TMA on tributary 5 is smaller than the value of this parameter, the TMA Low SET Temperature BTSDATUBP(Op alarm is MRFDtional) triggered. 210304 Alarm clearance ADD accumulated BTSALMMGMR failure ULE(Mandatory) duration
Enumeration Type
ALLCIC(Set all Timeslots CIC), ALLNULL(Set all Timeslots Null) ALLCIC, ALLNULL
None None
ALLCIC
E1/T1 link
None
Not involved
Not involved
None
Transpor t
ALMD0
BSC6900
Faulty Management
0~2000
mA
None
30 BTS
None
Not involved
Not involved
None
Equipme nt
ALMD1
BSC6900
Faulty Management
0~2000
mA
None
30 BTS
None
Not involved
Not involved
None
Equipme nt
ALMD2
BSC6900
Faulty Management
0~2000
mA
None
30 BTS
None
Not involved
Not involved
None
Equipme nt
ALMD3
BSC6900
Faulty Management
0~2000
mA
None
30 BTS
None
Not involved
Not involved
None
Equipme nt
ALMD4
BSC6900
Faulty Management
0~2000
mA
None
30 BTS
None
Not involved
Not involved
None
Equipme nt
ALMD5
BSC6900
Faulty Management
0~2000
mA
None
30 BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
MRFD210304
Faulty Management
0~65535
None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page11of316
150682621.xls.ms_office
Security Level:
Whether the configuration of alarm parameters is allowed. In multi-mode scenario, the value of this parameter in this mode must be the SET same as the BTSAPMUBP(O value of the ptional) correspondin SET g parameter BTSDPMUBP(O in another MRFDptional) mode. 210304 Whether to shield Boolean alarms. Each bit indicates whether to shield the alarm associated with a specific Boolean. If the bit is set to 1, the Boolean alarm is not shielded. If the bit is set to 0, the Boolean alarm is shielded. SET Low bit BTSALM(Option correspond GBFDal) to low port. 111202 Whether to shield Boolean alarms. Each bit indicates whether to shield the alarm associated with a specific Boolean. If the bit is set to 1, the Boolean alarm is not shielded. If the bit is set to 0, the Boolean alarm is shielded. SET Low bit BTSALM(Option correspond GBFDal) to low port. 111202 Whether to shield Boolean alarms. Each bit indicates whether to shield the alarm associated with a specific Boolean. If the bit is set to 1, the Boolean alarm is not shielded. If the bit is set to 0, the Boolean alarm is shielded. Low bit correspond to low port. Whether to shield Boolean alarms. Each bit indicates whether to shield the alarm associated with a specific Boolean. If the bit is set to 1, the Boolean alarm is not shielded. If the bit is set to 0, the Boolean alarm is shielded. Low bit correspond to low port. This parameter can be configured only when "BTSTYPE" is BTS3006C or BTS3002E. Whether to shield Boolean alarms. Each bit indicates whether to shield the alarm associated with a specific Boolean. If the bit is set to 1, the Boolean alarm is not shielded. If the bit is set to 0, the Boolean alarm is shielded. Low bit correspond to low port. This parameter can be configured only when "BTSTYPE" is BTS3006C or BTS3002E. ID of the intermittent alarm.
Faulty Management
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
AlmFlag1
BSC6900
O&M of BTS
0~255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
AlmFlag2
BSC6900
O&M of BTS
0~255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
AlmFlag3
BSC6900
GBFD111202
O&M of BTS
0~255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
AlmFlag4
BSC6900
GBFD111202
O&M of BTS
0~255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
AlmFlag5
BSC6900
AlmId
Alarm ID
BSC6900
ALMID
Alarm ID.
BSC6900
SET BTSALM(Option al) SET BTSALMFLASH THD(Mandatory) ADD BTSALMMGMR ULE(Mandatory) Alarm ID
0~255
None None
None
BTS
None
Not involved
Not involved
None
0~65534
None None
None
BTS
None
Not involved
Not involved
None
0~65535
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
BSC6900 V900R011
ALMLMTDO WN
Lower Alarm
BSC6900
If the input current of the antenna feeder is smaller than the value of this parameter, an alarm related to the GPS antenna MRFDis reported. 210304 If the input current of the antenna feeder is greater than the value of this parameter and "GPS or RGPS" is set to "GPS", an alarm related to the GPS antenna is MRFDreported. 210304 If the input current of the antenna feeder is greater than the value of this parameter and "GPS or RGPS" is set to "RGPS", an alarm related to the GPS antenna MRFDis reported. 210304
Faulty Management
0~15
mA
None
10 BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
45~155
mA
None
100 BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
125~175
mA
None
150 BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page12of316
150682621.xls.ms_office
Security Level:
BSC6900
ALMPARAC FGFLAG
BSC6900
Accumulated ADD alarm BTSALMMGMR occurrence ULE(Mandatory) duration Alarm Occur Accumulative Time refers to the percentage of the alarm occurrence accumulative time to "Flash Statis Alarm Raise Time Window". If the alarm occurrence accumulative duration is greater than the parameter value, the BTS fault statistical alarm is reported. For example, if the parameter value is 60, it indicates that Alarm Occur SET Accumulative BTSALMFLASH Time = THD(Optional) "Flash Statis Alarm Clear Accumulative Time refers to the percentage of the alarm clearance accumulative time to "Flash Statis Alarm Clear Time Window". If the alarm clearance accumulative duration is greater than this threshold, the BTS fault statistical alarm is cleared. For example, if the parameter value is 30, it indicates that Alarm Clear Accumulative SET Time = BTSALMFLASH "Flash Statis THD(Optional) Alarm Clear If the number of alarm flashes exceeds the value of this parameter within the time specified by "Flash Statis Alarm Raise Time Window", the BTS Statistical Alarm is generated. If this parameter is set to 0, the statistics of the BTS SET alarm flashes BTSALMFLASH is not THD(Optional) collected. If the number of alarm flashes is smaller than the value of this parameter within the time specified by "Flash Statis Alarm Clear Time Window", the BTS Statistical Alarm is cleared. If this parameter is set to 0, the statistics of the BTS SET alarm flashes BTSALMFLASH is not THD(Optional) collected. Whether the configuration of alarm parameters is allowed The value "YES" indicates that the configuration is allowed, and the value "NO" indicates that the SET configuration BTSDHEUBP(Op is not tional) allowed. EXP ALMLOG(Option al) STA ALMLOG(Option al)
MRFD210304
Faulty Management
0~65535
None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
MRFD210304
Faulty Management
0~100
per cent
0 None
BTS
The recommended value of this parameter is greater than twice "Alarm Clear Accumulative Time Threshold" and greater than twice "Flash Alarm Read & Occur Threshold". Write
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
MRFD210304
Faulty Management
0~100
per cent
0 None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
MRFD210304
Faulty Management
0~250
None
0 None
BTS
The recommended value of this parameter is greater than twice "Alarm Clear Times Read & Threshold". Write
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
MRFD210304
Faulty Management
0~250
None
0 None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
MRFD210304
Faulty Management
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
almtp
Alarm Type
BSC6900
Type of the alarm. The alarm can be a fault alarm or an event MRFDalarm. It is used to 210304
Faulty Management
Enumeration Type
None all
all
RNC
None
Not involved
Not involved
None
Equipme nt
ALPHA
ALPHA
BSC6900
ALTIDECI
BSC6900
ALTITUDE
BSC6900
perform open loop power control. Alpha parameter is used by the MS to calculate the output power PCH of the uplink PDCH. This parameter is used to set the reduced class of the Tx power of the MS in the corresponde nce with the path loss when the GPRS dynamic SET power GCELLPSPWPA control is RA(Optional) enabled. Decimal part SET of the GCELLLCS(Opti antenna onal) altitude part Integer SET of the GCELLLCS(Opti antenna onal) altitude Alarm
GBFD119115
Power Control BSS-Based LCS (Cell ID + TA) BSS-Based LCS (Cell ID + TA)
Enumeration Type
0(0.0), 1(0.1), 2(0.2), 3(0.3), 4(0.4), 5(0.5), 6(0.6), 7(0.7), 8(0.8), 9(0.9), 10(1.0)
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 None None
6 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
GBFD115402 GBFD115402
None
None
Cell
None
Not involved
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
0~6553
None
None
Cell
None
Not involved
Not involved
None
alvl
Alarm Severity
BSC6900
severity. One or more severities can be selected. By EXP default, all ALMLOG(Option severities are MRFDal) selected. 210304 SET ALMLVL(Mandat ory) SET ALMSCRN(Mand atory) SET ENVALMPARA( Optional) Alarm severity. One or more severities can be selected. By default, all severities are selected. Whether to SET supply power BTSDATUBP(Op to the TMA tional) on tributary 0 Whether to SET supply power BTSDATUBP(Op to the TMA tional) on tributary 1 Whether to SET supply power BTSDATUBP(Op to the TMA tional) on tributary 2
Faulty Management
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
alvl
Alarm Severity
BSC6900
MRFD210304
Faulty Management
Enumeration Type
AMPC0
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
AMPC1
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
AMPC2
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
Critical(Critical), Major(Major), Minor(Minor), Warning(Warning ) DISABLED(Disa bled), ENABLED(Enabl ed) DISABLED(Disa bled), ENABLED(Enabl ed) DISABLED(Disa bled), ENABLED(Enabl ed)
None None
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
DISABLED, ENABLED
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
DISABLED, ENABLED
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
DISABLED, ENABLED
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page13of316
150682621.xls.ms_office
Security Level:
AMPC3
BSC6900
Whether to SET supply power BTSDATUBP(Op to the TMA GBFDtional) on tributary 3 111202 Whether to SET supply power BTSDATUBP(Op to the TMA GBFDtional) on tributary 4 111202 Whether to SET supply power BTSDATUBP(Op to the TMA GBFDtional) on tributary 5 111202 Maximum degree by which the BSC can control the SET power of the GCELLPWR2(O AMR BTS ptional) dynamically Whether to enable the III power control algorithm for AMR calls. If enabled, power SET control is GCELLPWR3(O performed on ptional) AMR calls. Whether to enable the adaptive adjustment function of AMR downlink threshold. After this function is enabled, the BTS estimates the long-term voice quality (indicated by the long-term FER(frame erase ratio)) and compares the estimated result with the specified target voice quality. If the estimated result does not conform to the target voice quality, SET it indicates GCELLCCAMR( that the Optional) current AMR Number of measurement reports sampled for averaging downlink AMR signal strength. A single measurement report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurement reports to reflect the radio environment. Number of downlink AMR measurement reports that the BSC predicts. The BSC takes a while to confirm the power control effect of a power control command. Thus, the BSC makes a power control decision based on a measurement report that lags behind the changes in the receive level and quality instead of reflecting the real-time radio environment. As a result, Quality level threshold for decreasing downlink AMR signal power. If the BTS transmits AMR signals at a quality level less than "AMR DL Qual. Upper Threshold", the BSC decreases the power of the BTS. If (downlink receive level "AMR MAX Down Adj. PC Value by Qual.") < "AMR DL RX_LEV Lower Threshold", however, the BSC does not adjust the transmit power. Quality level threshold for increasing downlink AMR signal power. If the BTS transmits AMR signals at a quality level greater than "AMR DL Qual. Lower Threshold", the BSC increases the power of the BTS. If (downlink receive level + "AMR MAX Up Adj. PC Value by Qual.") > "AMR DL RX_LEV Upper Threshold", however, the BSC does not adjust the transmit power.
O&M of BTS
Enumeration Type
DISABLED(Disa bled), ENABLED(Enabl DISABLED, ed) ENABLED DISABLED(Disa bled), ENABLED(Enabl DISABLED, ed) ENABLED DISABLED(Disa bled), ENABLED(Enabl DISABLED, ed) ENABLED
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
AMPC4
BSC6900
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
AMPC5
BSC6900
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD115503
1~16, step:2
dB
None
16 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, the dynamic power adjustment range for the BTS is decreased. This may cause The parameter modification power waste and increase network has no impact on the interference when the downlink quality is Versions earlier than equipment. good. BSC6900 V900R011
Radio
BSC6900
GBFD117601
Enumeration Type
OFF, ON
None None
ON
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
GBFD115506
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
When this parameter is set to YES and the value of the downlink threshold is not The parameter modification reasonable, the algorithm can be used to has no impact on the dynamically adjust the AMR downlink rate equipment. to increase the downlink speech MOS. BSC6900 V900R011
Radio
BSC6900
GBFD115503
ms
None
5 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
AMRDLPRE DLEND
BSC6900
GBFD115503
0~3
None None
0 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to PWR2 and "DNPCEN" in the "SET GCELLBASICPARA" Read & command is set to YES. Write
Not involved
Not involved
None
Radio
AMRDLQHT HRED
BSC6900
GBFD115503
0~7
None None
0 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRDLQLTHRED" >= Read & "AMRDLQHTHRED". Write
Not involved
Not involved
None
If this parameter is set to a smaller value, downlink power control may not be performed when the voice quality is good, thus causing the power waste and increasing the interference. If this parameter is set to a greater value, The parameter modification downlink power control may be performed has no impact on the when the voice quality is bad, thus Versions earlier than equipment. affecting the voice quality. BSC6900 V900R011
Radio
AMRDLQLT HRED
BSC6900
GBFD115503
0~7
None None
3 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRDLQLTHRED" >= Read & "AMRDLQHTHRED". Write
Not involved
Not involved
None
If this parameter is set to a greater value, uplink power control may not be performed when the voice quality is bad, thus affecting the voice quality. If this parameter is set to a smaller value, uplink power control may be performed when The parameter modification the voice quality is good, thus causing the has no impact on the power waste and increasing the Versions earlier than equipment. interference. BSC6900 V900R011
Radio
6/9/2013
Page14of316
150682621.xls.ms_office
Security Level:
BSC6900
Number of measurement reports sampled for averaging downlink AMR signal quality. A single measurement report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurement reports to SET reflect the GCELLPWR2(O radio GBFDptional) environment. 115503 During downlink power control, if the downlink receive quality level is equal to or greater than this threshold, "AMR DL RX_LEV Upper Threshold" is increased by "AMR DL Qual Bad UpLEVDiff" to further increase the SET expected GCELLPWR2(O downlink GBFDptional) power level. 115503 During downlink power control, if the downlink receive quality level is equal to or greater than "AMR DL Qual Bad Trig Threshold", "AMR DL RX_LEV Upper Threshold" is increased by "AMR DL Qual Bad UpLEVDiff" to further increase the SET expected GCELLPWR2(O downlink ptional) power level. Upper threshold for downlink AMR signal strength. If the downlink received AMR signal level is greater than this threshold, a power decrease is computed. Then, the power is decreased by the least of the power decrease, maximum power adjustment step allowed by the quality zone to which the received signal quality belongs, and SET "AMR MAX GCELLPWR2(O Down Adj. ptional) PC Value by Lower threshold for downlink AMR signal strength. If the downlink received AMR signal level is less than this threshold, a power increase is computed. Then, the power is increased by the least of the power increase, "AMR MAX Up Adj. PC Value by RX_LEV", and "AMR MAX Up Adj. PC Value by Qual.". Power increase = SET ("AMR DL GCELLPWR2(O RX_LEV ptional) Upper
ms
None
5 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
0~7
None None
2 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
GBFD115503
0~63
dB
None
8 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
AMRDLSSH THRED
BSC6900
GBFD115503
0~63
dB
None
33 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRDLSSHTHRED" >= Read & "AMRDLSSLTHRED". Write
Not involved
Not involved
None
If this parameter is set to a greater value, downlink power control may not be performed when the downlink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, The parameter modification downlink power control may be performed has no impact on the when the downlink power is low, in this Versions earlier than equipment. way, call drops may occur. BSC6900 V900R011
Radio
BSC6900
GBFD115503
0~63
dB
None
25 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRDLSSHTHRED" >= Read & "AMRDLSSLTHRED". Write
Not involved
Not involved
None
If this parameter is set to a greater value, uplink power control may be performed when the downlink level is high, thus causing the power waste and increasing the interference. If this parameter is set The parameter modification to a smaller value, power control may not has no impact on the be performed when the downlink power is Versions earlier than equipment. low, in this way, call drops may occur. BSC6900 V900R011 If this switch is turned on, AMR FR calls can be switched into AMR HR calls to relieve the network congestion, but the voice quality is decreased; if this switch is turned off, AMR FR calls cannot be switched into AMR HR calls, that is, The parameter modification network congestion cannot be relieved has no impact on the through the handover from TCHF to Versions earlier than equipment. TCHH. BSC6900 V900R011
Radio
BSC6900
Whether to enable the algorithm for the loadbased AMR handover between full rate and half GBFDrate With "F-H Ho 510501 Period" and the duration for triggering handover from full rate to half rate, this parameter determines the current ATCB offset by which to choose the MSs to undergo handover from full rate to half rate. ATCB offset = (duration for triggering handover from full rate to half rate/"F-H Ho Period" + 1) x "AMR F-H Ho ATCB GBFDAdjust Step" 510501 ATCB threshold for the AMR handover from full rate to half rate. If the ATCB of an AMR full rate call is equal to or greater than this threshold, the AMR call is handed over from full rate GBFDto half rate. 510501
HUAWEI II Handover
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM2. Write
Not involved
Not involved
None
Radio
BSC6900
HUAWEI II Handover
0~255
dB
None
3 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "AMRFULLTOHALFHOA Read & LLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, the handover margin is increased in a short period and many MSs are handed over from TCHF to TCHH, thus affecting the voice quality. If this parameter is set to a smaller value, the handover margin is enlarged slowly The parameter modification and it takes a long time to initiate a TCHFhas no impact on the TCHH handover. Thus, network Versions earlier than equipment. congestion cannot be relieved in time. BSC6900 V900R011
Radio
BSC6900
HUAWEI II Handover
0~255
dB
None
20 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "AMRFULLTOHALFHOA Read & LLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, only MSs in the center of the cell can meet the handover condition. Thus, the network congestion cannot be relieved in time. If this parameter is set to a smaller value, The parameter modification MSs at the edge of the cell can also meet has no impact on the the handover condition, thus affecting the Versions earlier than equipment. voice quality. BSC6900 V900R011
Radio
6/9/2013
Page15of316
150682621.xls.ms_office
Security Level:
BSC6900
With "F-H Ho Period" and the duration for triggering handover from full rate to half rate, this parameter determines the current path loss offset by which to choose the MSs to undergo handover from full rate to half rate. Path loss offset = (duration for triggering handover from full rate to half rate/"F-H Ho Period" + 1) x "AMR F-H Ho Pathloss GBFDAdjust Step" 510501 Path loss threshold for the AMR handover from full rate to half rate. If the path loss of an AMR full rate call is equal to or less than this threshold, the AMR call is handed over from full rate GBFDto half rate. 510501 Quality threshold for the AMR handover from full rate to half rate. If the uplink and downlink receive quality levels of an AMR full rate call are equal to or less than this threshold, the AMR call is handed over from full rate GBFDto half rate. 510501 Load threshold for the AMR handover from full rate to half rate. If the cell load is greater than this threshold, the AMR full rate calls are handed over GBFDto half rate. 510501 ATCB threshold for the AMR handover from half rate to full rate. If the ATCB of an AMR half rate call is less than this threshold, the AMR call is handed over from half rate GBFDto full rate. 510501 Path loss threshold for the AMR handover from half rate to full rate. If the path loss of an AMR half rate call is greater than this threshold, the AMR call is handed over from half rate GBFDto full rate. 510501 Whether to enable the algorithm for the uplink and downlink receive quality based AMR handover from half rate GBFDto full rate 510501 Quality threshold for the AMR handover from half rate to full rate. If the receive quality level of an AMR half rate call is greater than this threshold, the AMR call is handed over from half rate to full rate. Load threshold for the AMR handover from half rate to full rate. If the cell load is less than this threshold, the AMR half rate calls are handed over to full rate.
HUAWEI II Handover
0~255
dB
None
5 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "AMRFULLTOHALFHOA Read & LLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, the handover margin is increased in a short period and many MSs are handed over from TCHF to TCHH, thus affecting the voice quality. If this parameter is set to a smaller value, the handover margin is enlarged slowly The parameter modification and it takes a long time to initiate a TCHFhas no impact on the TCHH handover. Thus, network Versions earlier than equipment. congestion cannot be relieved in time. BSC6900 V900R011
Radio
HUAWEI II Handover
0~255
dB
None
100 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "AMRFULLTOHALFHOA Read & LLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, MSs at the edge of the cell can also meet the handover condition, thus affecting the voice quality. If this parameter is set to a smaller value, only MSs in the center of the cell can The parameter modification meet the handover condition. Thus, the has no impact on the network congestion cannot be relieved in Versions earlier than equipment. time. BSC6900 V900R011
Radio
HUAWEI II Handover
0~7
None None
0 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "AMRFULLTOHALFHOA Read & LLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, MSs with poor quality can also meet the handover condition, thus affecting the voice quality. If this parameter is set to a smaller value, The parameter modification little MSs can meet the handover has no impact on the condition. Thus, the network congestion Versions earlier than equipment. cannot be relieved in time. BSC6900 V900R011
Radio
BSC6900
HUAWEI II Handover
0~100
per cent
None
75 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "AMRFULLTOHALFHOA Read & LLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, the calls cannot be handed over to TCHH in a short period when the traffic volume is increased greatly. Thus, the network congestion cannot be relieved in time. If this parameter is set to a smaller value, The parameter modification calls are handed over to TCHH has no impact on the unnecessarily, thus causing MOS loss of Versions earlier than equipment. the customer. BSC6900 V900R011
Radio
BSC6900
HUAWEI II Handover
0~255
dB
None
4 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "AMRFULLTOHALFHOA Read & LLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, only MSs in the center of the cell use the TCHH, thus leading to timeslot waste and the network congestion cannot be relieved in time. If this parameter is set to a smaller value, MSs at the edge of the cell The parameter modification and with poor quality also cannot be has no impact on the handed over to the TCHF, thus affecting Versions earlier than equipment. the voice quality. BSC6900 V900R011
Radio
HUAWEI II Handover
0~255
dB
None
108 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "AMRFULLTOHALFHOA Read & LLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, MSs at the edge of the cell and with poor quality also cannot be handed over to the TCHF, thus affecting the voice quality. If this parameter is set to a smaller value, only MSs in the center of the cell use the The parameter modification TCHH, thus leading to timeslot waste and has no impact on the the network congestion cannot be relieved Versions earlier than equipment. in time. BSC6900 V900R011
Radio
HUAWEI II Handover
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "AMRFULLTOHALFHOA Read & LLOW" is set to YES. Write
Not involved
Not involved
None
Radio
GBFD510501
HUAWEI II Handover
0~7
None None
3 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "AMRFULLTOHALFHOA Read & LLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, handover cannot be triggered even when the quality is poor, thus affecting the voice quality; if this parameter is set to a The parameter modification smaller value, handover is triggered even has no impact on the when the quality is good, thus the network Versions earlier than equipment. congestion cannot be relieved in time. BSC6900 V900R011
Radio
BSC6900
GBFD510501
HUAWEI II Handover
0~100
per cent
None
15 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "AMRFULLTOHALFHOA Read & LLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, calls are handed over to TCHH unnecessarily, thus causing MOS loss of the customer; if this parameter is set to a greater value, TCHF-TCHH handover is The parameter modification performed only when the traffic volume is has no impact on the high, and thus network congestion may Versions earlier than equipment. occur. BSC6900 V900R011
Radio
BSC6900
Maximum step by which the power can be increased SET according to GCELLPWR2(O received ptional) signal quality Maximum step by which the power can be decreased when the received signal quality belongs to quality zone 0. Huawei power control algorithm generation II classifies the received signal quality into three quality zones. The maximum step by which the power can be decreased according to signal level SET varies GCELLPWR2(O according to ptional) the quality
GBFD115503
0~32
dB
None
8 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, call drops may occur due to delayed power control; if this parameter is set to a The parameter modification greater value, power waste may occur has no impact on the and network interference may be Versions earlier than equipment. increased. BSC6900 V900R011
Radio
GBFD115503
0~30
dB
None
2 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, fast power control cannot be realized. If The parameter modification this parameter is set to a greater value, has no impact on the the power control may be performed Versions earlier than equipment. excessively, thus leading to call drops. BSC6900 V900R011
Radio
6/9/2013
Page16of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
Maximum step by which the power can be decreased when the received signal quality belongs to quality zone 1. Huawei power control algorithm generation II classifies the received signal quality into three quality zones. The maximum step by which the power can be decreased according to signal level SET varies GCELLPWR2(O according to ptional) the quality Maximum step by which the power can be decreased when the received signal quality belongs to quality zone 2. Huawei power control algorithm generation II classifies the received signal quality into three quality zones. The maximum step by which the power can be decreased according to signal level SET varies GCELLPWR2(O according to ptional) the quality
GBFD115503
0~30
dB
None
0 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, fast power control cannot be realized. If The parameter modification this parameter is set to a greater value, has no impact on the the power control may be performed Versions earlier than equipment. excessively, thus leading to call drops. BSC6900 V900R011
Radio
GBFD115503
0~30
dB
None
0 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, fast power control cannot be realized. If The parameter modification this parameter is set to a greater value, has no impact on the the power control may be performed Versions earlier than equipment. excessively, thus leading to call drops. BSC6900 V900R011
Radio
AMRMRCO MPREG
BSC6900
Maximum step by which the power can be increased SET according to GCELLPWR2(O received GBFDptional) signal level 115503 Whether to enable the compensatio n of AMR measurement reports in Huawei power control algorithm generation II If this parameter is set to YES, Huawei power control algorithm generation II puts a currently received measurement report into the measurement report compensatio n queue. Then, the algorithm SET records the GCELLPWR2(O change in the GBFDptional) transmit 115503 Minimum interval between two consecutive SET AMR power GCELLPWR2(O control GBFDptional) commands 115503 Maximum step by which the power can be decreased SET according to GCELLPWR2(O received GBFDptional) signal quality 115503 Number of levels by which the BTS increases the power of an SACCH frame. This parameter is used for SACCH power control. When sending an SACCH frame, the BTS increases the power of the SACCH frame by this SET specified GCELLPWRBAS number of IC(Optional) levels. Whether to enable the BSC to assign AMR half rate channels preferentially according to the channel types allowed by the MSC and the current SET TCH seizure GCELLCHMGA ratio of the D(Optional) cell
0~32
dB
None
8 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, call drops may occur due to delayed power control; if this parameter is set to a The parameter modification greater value, power waste may occur has no impact on the and network interference may be Versions earlier than equipment. increased. BSC6900 V900R011
Radio
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
AMRPCADJ PERIOD
AMR PC Interval
BSC6900
1~15, step:480
ms
None
3 Cell
Not involved
Not involved
None
If this parameter is set to a greater value, power control may not be performed in time. If this parameter is set to a smaller The parameter modification value, power control may be performed has no impact on the frequently, thus increasing the signaling Versions earlier than equipment. load. BSC6900 V900R011
Radio
AMRQUALS TEP
BSC6900
0~4
dB
None
4 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, The parameter modification the algorithm cannot realize fast power has no impact on the control. If this parameter is set to a Versions earlier than equipment. greater value, call drops may occur. BSC6900 V900R011
Radio
AMRSADLU PGRADE
BSC6900
GBFD110703
0~15
None None
0 Cell
None
Not involved
Not involved
None
Radio
AMRTCHHP RIORALLO W
BSC6900
GBFD115502
AMR HR
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
ON
Cell
None
Not involved
Not involved
None
Radio
AMRTCHHP RIORLOAD
BSC6900
Load threshold for assigning half rate channels preferentially. If the current TCH seizure ratio of the cell is greater than this threshold, amr half rate channels are assigned GBFDpreferentially. 115502
AMR HR
0~99
per cent
None
55 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, cell congestion may not be relieved. If this The parameter modification parameter is set to a smaller value, has no impact on the TCHFs may be assigned unnecessarily, Versions earlier than equipment. thus affecting the voice quality. BSC6900 V900R011
Radio
6/9/2013
Page17of316
150682621.xls.ms_office
Security Level:
AMRUADTH AW
Whether to enable the adaptive adjustment function of AMR uplink threshold. After this function is enabled, the BTS estimates the long-term voice quality (indicated by the long-term FER(frame erase rate)) and compares the estimated result with the specified target voice quality. If the estimated result does not conform to the target voice quality, it indicates SET that the GCELLCCAMR( current AMR GBFDOptional) handover 115506 Number of measurement reports sampled for averaging uplink AMR signal strength. A single measurement report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurement reports to SET reflect the GCELLPWR2(O radio ptional) environment. Number of uplink AMR measurement reports that the BSC predicts. The BSC takes a while to confirm the power control effect of a power control command. Thus, the BSC makes a power control decision based on a measurement report that lags behind the changes in the receive level and quality instead of reflecting the real-time radio SET environment. GCELLPWR2(O As a result, ptional) the power Quality level threshold for decreasing the power of an uplink AMR call. If the MS transmits AMR signals at a quality level less than "AMR ULQual. Upper Threshold", the BTS decreases the power of the MS. If (uplink receive level "AMR MAX Down Adj. PC Value by Qual.") < "AMR UL RX_LEV Lower Threshold", however, the BTS does SET not adjust the GCELLPWR2(O transmit ptional) power.
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
When this parameter is set to YES and the value of the uplink threshold is not The parameter modification reasonable, the algorithm can be used to has no impact on the dynamically adjust the AMR uplink rate to equipment. increase the uplink speech MOS.
BSC6900 V900R011
Radio
BSC6900
GBFD115503
ms
None
5 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
AMRULPRE DLEND
BSC6900
GBFD115503
0~3
None None
0 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to PWR2 and "DNPCEN" in the "SET GCELLBASICPARA" Read & command is set to YES. Write
Not involved
Not involved
None
Radio
AMRULQHT HRED
BSC6900
GBFD115503
0~7
None None
0 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRULQLOWTHRED" Read & >= "AMRULQHTHRED". Write
Not involved
Not involved
None
If this parameter is set to a smaller value, downlink power control may not be performed when the voice quality is good, thus causing the power waste and increasing the interference. If this parameter is set to a greater value, The parameter modification downlink power control may be performed has no impact on the when the voice quality is bad, thus Versions earlier than equipment. affecting the voice quality. BSC6900 V900R011
Radio
AMRULQLO WTHRED
BSC6900
Quality level threshold for increasing the power of an uplink AMR call. If the MS transmits AMR signals at a quality level greater than "AMR UL Qual. Lower Threshold", the BTS increases the power of the MS. If (uplink receive level + "AMR MAX Up Adj. PC Value by Qual.") > "AMR UL RX_LEV Upper Threshold", however, the BTS does SET not adjust the GCELLPWR2(O transmit GBFDptional) power. 115503 Number of measurement reports sampled for averaging uplink AMR signal quality. A single measurement report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurement reports to SET reflect the GCELLPWR2(O radio GBFDptional) environment. 115503 During uplink power control, if the uplink receive quality level is equal to or greater than this threshold, "AMR UL RX_LEV Upper Threshold" is increased by "AMR UL Qual. Bad UpLEVDiff" to further increase the SET expected GCELLPWR2(O uplink power GBFDptional) level. 115503
0~7
None None
3 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRULQLOWTHRED" Read & >= "AMRULQHTHRED". Write
Not involved
Not involved
None
If this parameter is set to a greater value, uplink power control may not be performed when the voice quality is bad, thus affecting the voice quality. If this parameter is set to a smaller value, uplink power control may be performed when The parameter modification the voice quality is good, thus causing the has no impact on the power waste and increasing the Versions earlier than equipment. interference. BSC6900 V900R011
Radio
AMRULQUA FTLEN
BSC6900
ms
None
5 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
AMRULQUA LBADTRIG
0~7
None None
3 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
6/9/2013
Page18of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
AN19
BSC6900
AN4
During uplink power control, if the uplink receive quality level is equal to or greater than "AMR UL Qual. Bad Trig Threshold", "AMR UL RX_LEV Upper Threshold" is increased by "AMR UL Qual. Bad UpLEVDiff" to further increase the expected uplink power level. Upper threshold for uplink AMR signal strength If the uplink received AMR signal level is greater than this threshold, a power decrease is computed. Then, the power is decreased by the least of the power decrease, maximum power adjustment step allowed by the quality zone to which the received signal quality belongs, and "AMR MAX Down Adj. PC Value by Qual.". Lower threshold for uplink AMR signal strength. If the uplink received AMR signal level is less than this threshold, a power increase is computed. Then, the power is increased by the least of the power increase, "AMR MAX Up Adj. PC Value by RX_LEV", and "AMR MAX Up Adj. PC Value by Qual.". Power increase = ("AMR UL RX_LEV Upper Threshold" + Maximum number of retransmissio ns of the Ainterface circuit reset message. When an Ainterface circuit of the BSC is reset, the BSC sends the reset message to the MSC and starts a timer. If the BSC fails to receive the Ainterface circuit reset response message from the MSC before the timer expires, the BSC retransmits the Ainterface circuit reset message. Maximum number of times of resending a reset message at the A interface. When the BSC is reset, the BSC sends a reset message to the MSC and starts a timer. If the timer expires when the BSC waits for a response message, the BSC resends the reset message and restarts a timer. If the timer expires again and the times of resending the reset message are
GBFD115503
0~63
dB
None
6 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
GBFD115503
0~63
dB
None
30 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRULSSHTHRED" >= Read & "AMRULSSLTHRED". Write
Not involved
Not involved
None
If this parameter is set to a greater value, power control may not be performed when the uplink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a The parameter modification smaller value, downlink power control has no impact on the may be performed when the uplink power Versions earlier than equipment. is low, in this way, call drops may occur. BSC6900 V900R011
Radio
GBFD115503
0~63
dB
None
18 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRULSSHTHRED" >= Read & "AMRULSSLTHRED". Write
Not involved
Not involved
None
If this parameter is set to a greater value, uplink power control may be performed when the uplink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a The parameter modification smaller value, power control may not be has no impact on the performed when the uplink power is low, Versions earlier than equipment. in this way, call drops may occur. BSC6900 V900R011
Radio
GBFD111803
0~65535
None None
BSC69 2 00 None
Not involved
Not involved
None
Equipme nt
GBFD111803
0~65535
None None
2 MSC
None
Not involved
Not involved
None
Equipme nt
BSC6900
Maximum gain to the signals from the remote end. If the parameter is set to a small value, the target SNR may be restrained when the SET signal arrives TCPARA(Option at the local GBFDal) end. 115603 Whether to enable the adaptive SET noise cancel TCPARA(Option (ANC) al) function
3~30
dB
None
6 Board
None
Not involved
Not involved
None
None
Equipme nt
ANC_Switch
ANC Switch
BSC6900
GBFD115603
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
CLOSE
Board
None
Not involved
Not involved
None
If this parameter is set to OPEN, the noise can be compensated automatically to improve the speech quality.
Equipme nt
ANC_Target _SNR
BSC6900
ANGLE
BSC6900
The system adjusts the remote input so that the ratio of the remote signal to the local noise is SET above the TCPARA(Option value of this GBFDal) parameter. 115603 SET Tilt angle of BTSANTANGLE( the RET MRFDMandatory) antenna 210602 ADD ADJNODE(Mand atory) ADD IPPATH(Mandat ory) ADD ADJMAP(Manda Adjacent tory) node ID ADD IPMUX(Mandato ry) ADD IPPATHBIND(Ma ndatory) SET ENVALMPARA( Optional)
Automatic Noise Restraint (ANR) Interval Type 10~30 Remote Electrical Tilt
10~30
dB
None
12 Board
None
Not involved
Not involved
None
String Type
None
1~5 characters
None None
None
None
None
Not involved
Not involved
None
The radio link should be reestablished after the parameter modification. None The parameter modification has no impact on the equipment. None
Equipme nt Equipme nt
BSC6900 V900R011
ANI
Adjacent Node ID
BSC6900
None
None
0~4599
None None
None
Not involved
Not involved
Not involved
None
Transpor t
ANI
Adjacent node ID
BSC6900
None
0~4599
None None
None
IP path None
Not involved
Not involved
ANM
Alarm Name
BSC6900
String Type
None
1~100 characters
None None
None
RNC
None
Not involved
Not involved
The adjacent node ID must be The parameter modification configure has no impact on the d. equipment. None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Equipme nt
6/9/2013
Page19of316
150682621.xls.ms_office
Security Level:
ANR_Mode
ANR Mode
BSC6900
SET TCPARA(Option al) ANR mode This parameter determines the noise depression degree. A great absolute value of this parameter SET corresponds TCPARA(Option to a strong al) depression. SET TCPARA(Option ANR target al) noise level
GBFD115603
None None
MODE0
Board
None
Not involved
Not involved
None
None
Equipme nt
ANR_Noise_ Reduction_L ANR Noise evel Reduction Level ANR_Noise_ ANR Noise Target Target_Level Level
BSC6900
GBFD115603 GBFD115603
BSC6900
Automatic Noise Restraint (ANR) Interval Type -32~0 Automatic Noise Restraint (ANR) Interval Type -64~0
-32~0
dB
None
-13 Board
None
Not involved
Not involved
None
-64~0
dB
None
-48 Board
None
Not involved
Not involved
None
The radio link should be reestablished after the parameter modification. The radio link should be reestablished after the parameter modification.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
None
ANR_Switch
ANR Switch
BSC6900
Whether to enable the adaptive SET noise restrain TCPARA(Option (ANR) GBFDal) function 115603 Size of the SET azimuth angle GCELLLCS(Opti of the cell GBFDonal) antenna 115402 Length of the feeder cable. The GPS satellite card is connected to the antenna through feeder cables. The transmission delay on the feeder cable can be calculated on the basis of the length of the feeder SET cable, thus BTSDGPSBP(O increasing ptional) the timing SET accuracy of BTSUSCUBP(Op the satellite GBFDtional) card. 510401 SET BTSDGPSBP(O ptional) Power supply SET switch of the BTSUSCUBP(Op GPS antenna GBFDtional) feeder 510401 GBFDADD 118611 MPGRP(Optiona E1T1 antiGBFDl) error switch. 118622 Whether to enable the BTS to clear SET the burglar BTSTHEFTALM( alarm GBFDOptional) automatically 111202 LOD RETANTCFG(M andatory) SET BTSANTANGLE( Mandatory) SET RETANTENB(Ma Number of ndatory) the antenna Number of the antenna feeder ADD channel TRXBIND2PHYB mapped to RD(Mandatory) the RXU
Automatic Noise Restraint Enumeration (ANR) Type BSS-Based LCS (Cell ID + TA)
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
CLOSE
Board
None
Not involved
Not involved
None
If this parameter is set to OPEN, the noise can be depressed automatically to improve the speech quality.
Equipme nt
BSC6900
0~360
degr ee None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
0~1000
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
ANTIERRFL AG
BSC6900
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
Board
None
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
AntiTheftAllo w
O&M of BTS
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
BTS
None
Not involved
Not involved
None
Equipme nt
ANTNO
Antenna No.
BSC6900
MRFD210602
0~35
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
A(A), B(B)
A, B
None None
None
TRX
None
Not involved
Not involved
Not involved
None
Equipme nt
BSC6900
Antenna pass No. of the RXU of a sublocation group. The parameter is configured only when the MRRU or GRRU is used in the sub-location GBFDgroup. 510104
Multi-site Cell
Enumeration Type
A(A), B(B)
A, B
None None
None
TRX
None
Not involved
Not involved
None
Equipme nt
AORB
ADD BTSANTFEEDE RBRD(Mandator y) SET Antenna pass BTSANTFEEDE number of RCONNECT(Opt the downlink GBFDional) tributary 111202
O&M of BTS
Enumeration Type
A, B, NULL
None None
None
BTS
Not involved
Not involved
None
Equipme nt
APN
BSC6900
None
None
0~335
None None
None
MTP3 link
None
Not involved
Not involved
Not involved
None
Transpor t
APP
Application type
BSC6900
Upper layer application type of the SCTP link. The upper layer application type of the Iub interface is NBAP. The upper layer application type of the Iur, IuPS, and IuCS interface is M3UA. In the BSC disaster tolerance, the application type is BBAP in the case of the communicatio n between the primary ADD and SCTPLNK(Mand secondary atory) BSC. None Application type of the ADD semiSEMILINK(Mand permanent atory) link.
None
Enumeration Type
None
SCTP link
None
Not involved
Not involved
Not involved
None
Transpor t
APPTYPE
Application Type
BSC6900
GBFD114701
SemiPermanent Connection
Enumeration Type
None None
None
BSC
None
Not involved
Not involved
None
Transpor t
AqmM
BSC6900
Update frequency of the value N (packet drop interval), indicating that the packet drop interval is updated after SET N packets BSCPSSOFTPA are GBFDRA(Optional) transmitted. 119904 Upper length threshold of the TBF buffer queue. If the length of the TBF buffer queue exceeds this threshold, whether the packets are discarded is determined according to SET the packet BSCPSSOFTPA discarding GBFDRA(Optional) policy. 119904 Congestion threshold of the TBF buffer queue. If the congestion level in the TBF buffer queue exceeds this threshold, whether the packets are discarded actively is determined according to SET the packet BSCPSSOFTPA discarding GBFDRA(Optional) policy. 119904
1~65535
pack et None
20 BSC
None
Not involved
Not involved
This paramete r is valid only when "AqmSwi tch" is The parameter modification set to has no impact on the OPEN. equipment. None
Radio
AqmMaxTh
BSC6900
None
1024 BSC
None
Not involved
Not involved
This paramete r is valid only when "AqmSwi tch" is The parameter modification set to has no impact on the OPEN. equipment. None
Radio
AqmMinTh
BSC6900
None
256 BSC
None
Not involved
Not involved
This paramete r is valid only when "AqmSwi tch" is The parameter modification set to has no impact on the OPEN. equipment. None
Radio
6/9/2013
Page20of316
150682621.xls.ms_office
Security Level:
AqmNinit
BSC6900
Initial value of the interval (indicated by N) at which the packets in the TBF buffer queue are discarded. The value N indicates the frequency of discarding the packets in the TBF buffer queue. The greater the value N, the lower the frequency of discarding packets, and the smaller the number of discarded packets within a certain period. The smaller the value N, the SET greater the BSCPSSOFTPA number of GBFDRA(Optional) discarded 119904 Lower threshold of the interval for discarding the packets in the TBF buffer queue, that is, the minimum SET value of N BSCPSSOFTPA (packet drop GBFDRA(Optional) interval). 119904 Upper threshold of the interval for discarding the packets in the TBF buffer queue, that is, the maximum SET value of N BSCPSSOFTPA (packet drop GBFDRA(Optional) interval). 119904 SET BSCPSSOFTPA GBFDRA(Optional) AQM switch. 119904
1~65535
pack et None
20 BSC
None
Not involved
Not involved
This paramete r is valid only when "AqmSwi tch" is The parameter modification set to has no impact on the OPEN. equipment. None
Radio
AqmNLower Bound
BSC6900
1~65535
pack et None
10 BSC
None
Not involved
Not involved
This paramete r is valid only when "AqmSwi tch" is The parameter modification set to has no impact on the OPEN. equipment. None
Radio
BSC6900
AqmSwitch
AQM Switch
BSC6900
1~65535
pack et None
20 BSC
None
Not involved
Not involved
CLOSE, OPEN
None None
CLOSE
BSC
None
Not involved
Not involved
This paramete r is valid only when "AqmSwi tch" is The parameter modification set to has no impact on the OPEN. equipment. None The parameter modification has no impact on the None equipment. None This paramete r is valid only when "AqmSwi tch" is The parameter modification set to has no impact on the OPEN. equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
AqmTarTh
BSC6900
AreaCode
Area Code
BSC6900
Target SET threshold of BSCPSSOFTPA the TBF GBFDRA(Optional) buffer queue. 119904 Local area SET code, for BSCBASIC(Opti example, 021 MRFDonal) for Shanghai 210301 CMP BRDAREA(Optio nal) LOD PATCH(Optional ) Area flag
None
384 BSC
None
Not involved
Not involved
Radio
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Radio
AREAFLAG
Area flag
BSC6900
MRFD210401
Enumeration Type
AREAFLAG
Area flag
BSC6900
SYN BRDAREA(Optio MRFDnal) Area flag for 210401 Threshold reporting the recovery alarm for the abnormal release alarm. If the percentage of the abnormal channel releases is equal to or less than this threshold, the recovery alarm for the abnormal release alarm is reported. That is, the SET abnormal GTRXRLALM(O release ptional) alarm is Release statistics base for subchannels. This parameter indicates the number of times that a subchannel is activated. In a timeslot, the release statistics base, B, multiplied by the number of channels, N, is the channel release sum, S. If the percentage of the abnormal channel releases in the latest S channel releases SET exceeds the GTRXRLALM(O Abnormal ptional) Warn Threshold for
Enumeration Type
PRIMARY(Prima ry), STANDBY(Stand PRIMARY, by), ALL STANDBY, ALL PRIMARY(Prima ry), STANDBY(Stand PRIMARY, by) STANDBY
None PRIMARY
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
None PRIMARY
PRIMARY
None
None
Not involved
Not involved
None
Equipme nt
GBFD111004
0~80
per cent
None
50 TRX
This parameter is valid only when "WLNKALMFLAG" is set Read & to YES. Write
Not involved
Not involved
None
Equipme nt
ARELBASE
GBFD111004
5~126
None None
100 TRX
This parameter is valid only when "WLNKALMFLAG" is set Read & to YES. Write
Not involved
Not involved
None
Equipme nt
ARELWTHD
BSC6900
reporting the abnormal release alarm. In a timeslot, the release statistics base, B, multiplied by the number of channels, N, is the channel release sum, S. If the percentage of the abnormal channel releases in the latest S channel releases exceeds this threshold, the abnormal SET release GTRXRLALM(O alarm is GBFDptional) reported. 111004 Retransmissi on times upon ARP timeout. When the ARP request times exceeds the retransmissio n time without a response, the ARP/BFD detection failure alarm is reported. This may trigger the STR port or board GBFDIPCHK(Optional) switchover. 118609
5~100
per cent
None
100 TRX
This parameter is valid only when "WLNKALMFLAG" is set Read & to YES. Write
Not involved
Not involved
None
Equipme nt
ARPRETRY
BSC6900
3~10
None
Ethernet port
BSC6900
GBFD118609
3~10
ms
Not involved
To modify this paramete r, run "STP GATEW AYCHK" Interrupt the service until first and the correct gateway is set then or the port swapping or the "STR changing of IP route is GATEW finished. AYCHK". To modify this paramete r, run "STP GATEW AYCHK" first and then "STR GATEW Not involved AYCHK".
Transpor t
Transpor t
ASN
None
None
0~27
None None
None
MTP3 link
None
Not involved
Not involved
Not involved
None
Equipme nt
6/9/2013
Page21of316
150682621.xls.ms_office
Security Level:
ASN
GBFD111804
0~27
None None
None
ATER CONS L
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
ASRN
BSC6900
None
None
0~11
None None
None
MTP3 link
None
Not involved
Not involved
Not involved
None
Equipme nt
ass
Event Type
BSC6900
Network management type of the EXP alarm. By ALMLOG(Option default, all al) network STA management ALMLOG(Option types are MRFDal) selected. 210304
Faulty Management
power, env, sig, trunk, hardware, software, run, comm, service, handle power(Power System), env(Environment System), sig(Signaling System), trunk(Trunk System), hardware(Hardw are System), software(Softwar e System), run(Running System), comm(Communic ation System), service(QoS), handle(Processin g Error)
power, env, sig, trunk, hardware, software, run, comm, service, handle
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
ASS
Event Type
BSC6900
Network management type of the alarm. By default, all network management types are selected. When this parameter is set to ENABLE, if the cell supports direct retry and the current cell load is equal to or larger than the value of "Cell direct retry forbidden threshold" in "SET GCELLOTHE XT" during the assignment, the BSC continues with the direct retry procedure.
MRFD210304
Faulty Management
Enumeration Type
power, env, sig, trunk, hardware, software, run, comm, service, handle
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
GBFD110607
Direct Retry
Enumeration Type
None None
DISABLE
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Offset relative to the level threshold for determining whether to assign a channel in the overlaid GBFDsubcell 113201
0~61
dB
None
35 Cell
In an enhanced concentric cell, if "LOWRXLEVOLFORBID SWITCH" is set to ON, this parameter and "OTOURECEIVETH" determine whether the current uplink receive level meets the condition for assigning channels of the overlaid subcell during the assignment of the underlaid subcell channels and overlaid subcell channels. In a normal concentric cell, if "LOWRXLEVOLFORBID SWITCH" is set to ON, this parameter, together with "RECLEVTHRES" and "RECLEVHYST", determines whether the current uplink receive level meets the condition for assigning channels of the overlaid subcell during the assignment of the underlaid subcell channels and overlaid Read & subcell channels. Write
Not involved
Not involved
None
Radio
ASSORXUC N
BSC6900
Number of the cabinet where the associated RXU board is installed. This parameter is valid for DRRU, MRRU, GRRU, or BTS3900E board in the remote monitoring subrack of the DBS3036, DBS3900 GSM, or BTS3900E GSM. The SET associated BTSAPMUBP(O RXU board ptional) cannot be SET associated BTSDEMUBP(O with other ptional) boards such SET as DEMU, BTSDHEUBP(Op APMU, or GBFDtional) DTCU. 111202 Number of the cabinet where the associated RXU board is installed. This parameter is valid for DRRU, MRRU, GRRU, or BTS3900E board in the remote monitoring subrack of the DBS3036, DBS3900 GSM, or BTS3900E GSM. The associated RXU board cannot be associated with other boards such SET as DEMU, BTSRXUBP(Man APMU, or GBFDdatory) DTCU. 111202 SET BTSAPMUBP(O ptional) SET BTSDEMUBP(O ptional) SET BTSDHEUBP(Op tional)
O&M of BTS
0~62, 255
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
ASSORXUC N
BSC6900
O&M of BTS
0~62
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
ASSORXUS N
BSC6900
Number of the slot where the associated RXU board is GBFDinstalled. 111202
O&M of BTS
0~23, 255
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
ASSORXUS N
BSC6900
Number of the slot where the SET associated BTSRXUBP(Man RXU board is GBFDdatory) installed. 111202 SET BTSAPMUBP(O ptional) SET BTSDEMUBP(O ptional) SET BTSDHEUBP(Op tional)
O&M of BTS
0~23
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
ASSORXUS RN
BSC6900
Number of the subrack where the associated RXU board is GBFDinstalled. 111202
O&M of BTS
0~255
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
ASSORXUS RN
BSC6900
Number of the subrack where the SET associated BTSRXUBP(Man RXU board is GBFDdatory) installed. 111202
O&M of BTS
0~254
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page22of316
150682621.xls.ms_office
Security Level:
ASSThres
ASSTIMER
T3107
BSC6900
AT1
T1
BSC6900
Absolute level threshold for automatic optimization of neighbor cells and frequencies. The measurement results in measurement reports are screened and counted according to this threshold. If the signal strength of a neighbor cell in a measurement report is greater than this threshold, the relevant traffic statistics SET counter is OTHSOFTPARA incremented (Optional) by one. After the BSC delivers an assignment command, the T3107 timer starts. If the BSC receives an assignment complete message within the scheduled time, the T3107 timer stops. If the timer expires, the BSC sends an SET assignment GCELLTMR(Opt failure ional) message. Timer for waiting for a single Ainterface circuit blocking or unblocking answer. The BSC starts this T1 timer after sending a single Ainterface circuit blocking or unblocking message. If the BSC does not receive a blocking or unblocking answer from the MSC before this timer expires for the first time, the BSC resends the single ASET interface BSCTMR(Option circuit al) blocking or MSC reset protection timer, that is, interval between the time when the BSC receives an MSC reset message and the time SET when the BSCAITFTMR(O BSC answer ptional) to the MSC. T17 timer. When receiving an MSC overload message or a single point congestion message for the first time, the BSC increases the level of the A interface flow control and starts the T17 and T18 timers at the same time. Timers T17 and T18 are set for adjusting the SET flow control BSCAITFTMR(O level over the ptional) A interface. T18 timer. When receiving an MSC overload message or a single point congestion message for the first time, the BSC increases the level of the A interface flow control and starts the T17 and T18 timers at the same time. Timers T17 and T18 are set for adjusting the SET flow control BSCAITFTMR(O level over the ptional) A interface.
GBFD510901
0~63
dB
None
BSC69 30 00 None
Not involved
Not involved
None
Radio
GBFD110502
500~60000
ms
None
10000 Cell
None
Not involved
Not involved
None
If this parameter is set to a higher value, channel resources may be wasted and The parameter modification congestion occurs; if this parameter is set has no impact on the to a lower value, the assignment success Versions earlier than equipment. rate may decrease. BSC6900 V900R011
Radio
GBFD111203
O&M of BSC
1~300
None
BSC69 30 00 None
Not involved
Not involved
None
Equipme nt
AT13
T13 -s
BSC6900
GBFD111803
1~300
None
150 MSC
None
Not involved
Not involved
None
Equipme nt
AT17
T17 -s
BSC6900
GBFD111705
1~300
None
This parameter is used with "T18 -s" in flow control over the A interface. The value of BSC69 this parameter should be Read & 30 00 smaller than "T18 -s". Write
Not involved
Not involved
None
Equipme nt
AT18
T18 -s
BSC6900
GBFD111705
1~300
None
60 MSC
This parameter is used with "T17 -s" in flow control over the A interface. The value of this parameter should be Read & greater than "T17 -s". Write
Not involved
Not involved
None
Equipme nt
AT19
T19
BSC6900
Timer for waiting for an A-interface circuit reset answer. The BSC starts this timer after sending an Ainterface circuit reset message. When this timer expires for the first time, the BSC resends the circuit reset message to the MSC. If this timer expires for the second time, the BSC reports an alarm for SET BSC circuit BSCTMR(Option resetting GBFDal) failure. 111203
O&M of BSC
1~300
None
BSC69 30 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page23of316
150682621.xls.ms_office
Security Level:
AT20
T20
BSC6900
Timer for waiting for an A-interface circuit group blocking or unblocking answer. After sending a CIC group blocking/unbl ocking message over the A interface, the BSC starts the timer T20. If the BSC fails to receive a response from the MSC before the first expiry of T20, the BSC resends the CIC group blocking/unbl ocking message. If no response SET is received BSCTMR(Option before the GBFDal) second 111203 Timer for SET waiting for an BSCAITFTMR(O A-interface ptional) reset answer Whether to enable the ATCB handover algorithm for the concentric cell. According to the neighbor cell signal, the ATCB handover algorithm determines the coverage of the overlaid subcell and balances the load between the overlaid subcell, underlaid subcell, and neighbor cell. Therefore, the algorithm helps to decrease the interference, SET to improve GCELLHOBASI the C(Optional) conversation Hysteresis in the distance between the boundary of the overlaid subcell and the boundary of the underlaid subcell. This parameter helps to adjust "Distance Between Boudaries of Subcells" and thus to prevent pingpong handover between the overlaid and underlaid subcells. Assume that the signal strength of the serving cell is SS(s) and that the SET signal GCELLHOEDBP strength of ARA(Optional) the neighbor Distance between the boundary of the overlaid subcell and the boundary of the underlaid subcell. This parameter specifies the difference between the coverage of the overlaid subcell and the coverage of the underlaid subcell in the concentric cell or dualfrequency network scenario. The boundaries of the overlaid and underlaid subcells are determined according to SET the relative GCELLHOEDBP value ARA(Optional) between the
1~300
None
BSC69 30 00 None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
AT4
T4 -s
BSC6900
GBFD111803
1~300
None
20 MSC
None
Not involved
Not involved
None
Equipme nt
ATCBHOEN
GBFD113201
NO(Close), YES(Open)
NO, YES
None None
NO
Cell
This parameter is valid only when "IUOTP" is set Read & to Concentric_cell. Write
Not involved
Not involved
None
Radio
ATCBHYST
GBFD114402
0~63
dB
None
2 Cell
This parameter is valid only when "ATCBHoSwitch" is set to OPEN, "IUOTP" is set to EDB_cell, or "TIGHTBCCHSWITCH" Read & is set to ON. Write
Not involved
Not involved
None
Radio
BSC6900
GBFD114402
0~63
dB
None
10 Cell
This parameter is valid only when "ATCBHoSwitch" is set to OPEN, "IUOTP" is set to EDB_cell, or "TIGHTBCCHSWITCH" Read & is set to ON. Write
Not involved
Not involved
None
If this parameter is set to a greater value, the overlaid subcell range in the algorithm is smaller than the actual range, thus The parameter modification leading to the unbalance between the has no impact on the traffic volume on the overlaid subcell and Versions earlier than equipment. that on the underlaid subcell. BSC6900 V900R011
Radio
Ater8KSw
Switch of 8K On Ater
BSC6900
Whether to enable the BSC to use a 8 kbit/s timeslot to transmit 8 SET kbit/s data at OTHSOFTPARA the Ater GBFD(Optional) interface 116901 Whether to enable the BSC to assign half rate channels preferentially SET when the OTHSOFTPARA Ater interface GBFD(Optional) is congested 116901 Threshold for considering the Ater interface congested. The BSC determines whether to assign full or half rate channels preferentially according to the congestion situations at the Ater interface. If the Ater resource usage exceeds this parameter, the Ater SET interface is OTHSOFTPARA considered GBFD(Optional) congested. 116901 ADD MTP3LNK(Mand atory) ADD ATERE1T1(Man datory) ADD ATERCONPATH (Optional) ADD ATERSL(Mandat ory) ADD ATERCONSL(M andatory) Index of an ADD Ater SEMILINK(Mand connection atory) path.
Flex Ater
Enumeration Type
NO, YES
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Equipme nt
AterCongHR Flag
Flex Ater
Enumeration Type
Close, Open
Close, Open
None None
Open
If the resource usage on the Ater interface exceeds the value of "AterCongstRatio" and this parameter is set to Open, the BSC preferentially selects BSC69 TCHF when assigning Read & 00 traffic channels. Write
Not involved
Not involved
None
Equipme nt
BSC6900
Flex Ater
80~100
per cent
None
This parameter is valid only when BSC69 "AterCongHRFlag" is set Read & 85 00 to OPEN. Write
Not involved
Not involved
None
If this parameter is set to a greater value, TCHFs are preferentially selected even when congestion occur on the Ater interface, thus decreasing the system capacity. If this parameter is set to a lower value, The parameter modification TCHHs are selected when no congestion has no impact on the occur on the Ater interface, thus Versions earlier than equipment. decreasing the voice quality. BSC6900 V900R011
Equipme nt
ATERIDX
BSC6900
None
None
0~254
None None
None
MTP3 link
None
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page24of316
150682621.xls.ms_office
Security Level:
BSC6900
Threshold for enabling the BSC local switching. When the congestion rate at the Ater interface exceeds this threshold, the SET function is GBFDBSSLS(Optional) enabled. 117701
Interval Type 0~100 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
0~100
per cent
None
BSC69 90 00 None
Not involved
Not involved
None
Equipme nt
ATERMASK
Ater Mask
BSC6900
ADD MTP3LNK(Mand atory) ADD ATERSL(Mandat ory) ADD Ater interface ATERCONSL(M timeslot andatory) mask. None Whether to configure the Ater OML link used for the TC subrack for the port. If it is actually configured and you specify that it is not configured, the TC subrack fails to start. If it is not configured and you specify that it is already configured, the crosstalk of the ADD timeslot on SEMILINK(Mand the port atory) occurs. ADD Ater ATEROML(Man maintenance datory) link index ADD Ater ATEROML(Man connection datory) path index ADD ATERSL(Option al) ADD ATERCONSL(O ptional)
None
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
E1/T1 link
None
Not involved
Not involved
Not involved
None
Transpor t
ATEROMLFL Whether or not for AG OML ATEROMLIN X Ater OML Index Ater Connection Path Index
BSC6900
Enumeration Type
NO, YES
NO, YES
None None
None
None
Not involved
Not involved
None
BSC6900
0~1
None None
None
None
Not involved
Not involved
None
ATERPIDX
BSC6900
0~254
None None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
ATERSLID
BSC6900
GBFD111203
O&M of BSC
0~2047
None None
None
ATER CONS L
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
Transport mode of the Ater interface. The Ater interface can be in TDM or SET in IP BSCBASIC(Man transport GBFDdatory) mode. 116902 Number of the RF port on the RF front-end board of the BTS. The number is unique in a board.
Enumeration Type
TDM(TDM), IP(IP)
TDM, IP
None None
None
BSC69 00 None
BSC6900
None
Equipme nt
ATN
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
A(Tributary A), B(Tributary B), ALL(All Tributary) TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
A, B, ALL
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
ATSMASK
None
None
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
MTP3 link
None
Not involved
Not involved
Not involved
ATT
Attach-detach allowed
BSC6900
Attachdetach allowed (ATT). If this parameter is set to YES, when a MS is powered off, the network does not process any call connection for the MS as a called party. In this way, the network processing SET time and GCELLIDLEBAS resources GBFDIC(Optional) are saved. 110302 TMA attenuation factor of SET antenna BTSRXUBP(Opti tributary 1 onal) [dB] TMA attenuation factor of antenna tributary 2 It specifies the loopback duration. It specifies the test duration.
IMSI Detach
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
The paramete r cannot be modified. The ATT must be set to the same value for different cells in a same location area. If not, some MSs after power-on may not act as a called party until they have waited for the period specified by
Not involved
None
Transpor t
Radio
BSC6900
GBFD111202
O&M of BTS
0~15
dB
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
AUSTOP
Loop time[min]
BSC6900
AUSTOP
Test time[min]
BSC6900
GBFD111202
O&M of BTS
0~15
dB
None
None
BTS
None
Not involved
Not involved
None
None
None
1~65535
min
None
None
Not involved
Not involved
None
None
None
1~60
min
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
BSC6900 V900R011
BSC6900
MRFD210305
Security Management
Enumeration Type
NONE, PEER
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD118611 GBFD118622
Enumeration Type
None None
None
PPP link
None
PPP link
Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The transport path should peer be re-established after the ends. parameter modification.
Transpor t
BSC6900
GBFD118611 GBFD118622
Enumeration Type
None None
None
MP group
None
BSC6900
Transpor t
BSC6900
Validation mode of the PPP link negotiation or MLPPP link GBFDnegotiation 118611
Enumeration Type
SERVER, CLIENT
SERVER, CLIENT
None None
None
BTS
None
PPP link
None
BSC6900 V900R011
Transpor t
AUTHNAME
GBFD118611 GBFD118622
String Type
None
1~63 characters
None None
None
PPP link
None
BSC6900
Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None
Transpor t
AUTHNAME
GBFD118611 GBFD118622
String Type
None
1~63 characters
None None
None
MP group
None
BSC6900
Transpor t
6/9/2013
Page25of316
150682621.xls.ms_office
Security Level:
AUTHNAME
Validation user name of the PPP link negotiation or MLPPP link GBFDnegotiation 118611
String Type
None
1~64 characters
None None
None
BTS
This parameter is required only when "Validate protocol type" is set to "PAP_V" or "CHAP_V" with the "ADD Read & PPPLNK" command. Write
PPP link
Negotiati on can succeed only when the configura tion is consisten t on the local and The transport path should peer be re-established after the ends. parameter modification.
None
BSC6900 V900R011
Transpor t
AUTHPWD
GBFD118611 GBFD118622
String Type
None
1~15 characters
None None
None
PPP link
None
PPP link
Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The transport path should peer be re-established after the ends. parameter modification.
Transpor t
AUTHPWD
GBFD118611 GBFD118622
String Type
None
1~15 characters
None None
None
MP group
None
BSC6900
Transpor t
AUTHPWD
Validation password of the PPP link negotiation or MLPPP link GBFDnegotiation 118611
String Type
None
1~16 characters
None None
None
BTS
This parameter is required only when "Validate protocol type" is set to "PAP_V" or "CHAP_V" in the "ADD PPPLNK" command.
PPP link
None
BSC6900 V900R011
Transpor t
AUTHTYPE
BSC6900
GBFD118611 GBFD118622
Enumeration Type
None NO_V
NO_V
PPP link
None
PPP link
Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The transport path should peer be re-established after the ends. parameter modification.
Transpor t
AUTHTYPE
BSC6900
Verification protocol type GBFDADD upon PPP or 118611 MPGRP(Optiona MP link GBFDl) negotiation 118622
Enumeration Type
None NO_V
None
MP group
None
BSC6900
Transpor t
AUTHTYPE
BSC6900
AUTO
Auto negotiation
BSC6900
AUTOADDS RCON
BSC6900
Type of the validation protocol for the PPP link negotiation or MLPPP link negotiation Whether the selfnegotiation mode is adopted 1. When the FG2 board is used and the port type is GE, the selfnegotiation mode must be adopted. 2. If the selfnegotiation mode is adopted, the FE port rate, working mode and flow control mode must be in accord with the negotiation result. If the selfnegotiation mode is not adopted, the FE port rate, SET working ETHPORT(Optio mode and nal) flow control Whether intersubrack path ADD be added BRD(Optional) automatically ADD BTSPPPLNK(Op tional) ADD BTSMPGRP(Opt ional) Whether to allow automatic adjustment for the uplink threshold and SET hysteresis of GCELLCCAMR( full rate AMR Optional) call rates Whether to allow automatic adjustment for the uplink threshold and hysteresis of SET half rate GCELLCCAMR( AMR call Optional) rates
GBFD118611
Enumeration Type
None None
None
BTS
None
PPP link
None
BSC6900 V900R011
Transpor t
None
None
Enumeration Type
ENABLE, DISABLE
ENABLE, DISABLE
None None
ENABLE
BSC6900
The port can be set to the DOWN or UP state when this paramete r is modified. If the negotiati on modes on the local and peer end are not consisten t, the service can be The parameter modification interrupte has no impact on the d. equipment. None The parameter modification has no impact on the equipment. None
Transpor t
MRFD210301
Configuration Management
Enumeration Type
NO(NO), YES(YES)
NO, YES
None YES
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GBFD115501
AMR FR
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
GBFD115502
AMR HR
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Whether to enable the BSC to SET obtain BTS OTHSOFTPARA logs GBFD(Optional) automatically 111202 Whether to enable the autonegotiation mode
O&M of BTS
Enumeration Type
NO, YES
NO, YES
None None
None
BSC69 00 None
Not involved
Not involved
If this paramete r is set to YES, the BSC load is increase d early in The parameter modification every has no impact on the morning. equipment. None
Equipme nt
AUTONEG
BSC6900
GBFD118601
Abis over IP
Enumeration Type
DISABLED(Disa bled), ENABLED(Enabl DISABLED, ed) ENABLED BTSAUTODLDA CT(BTS Software Auto DL and ACT), TMUAUTOACT( TMU Software Auto ACT)
None None
None
BTS
None
Not involved
Not involved
None
Radio
AUTOTYPE AUTOULKS W
BSC6900
Downloading SET and BTSAUTODLDA activation CTINFO(Optiona mode of the GBFDl) BTS 111202 LCK SCHTSK(Option Auto unlock MRFDal) switch 210305 Length of the time after which the locked user is unlocked MRFDautomatically 210305
BTSAUTODLDACT, TMUAUTOACT
None None
None
BTS
None
Not involved
Not involved
None
OFF, ON
OFF, ON
None ON
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt Equipme nt
BSC6900
Security Management
1~65535
min
None
None
RNC
None
Not involved
Not involved
None
Equipme nt
AUTYPE
BSC6900
SET OPT(Optional)
optical adaptation type between high-order path and multiplex section. None
None
Enumeration Type
AU4(AU4), AU3(AU3)
AU4, AU3
None None
AU4
Optical port
If the mode is not consisten t, will interrupt service If the mode is not until it is The parameter modification consistent, will interrupt consisten has no impact on the service until it is consistent. t. equipment. None
BSC6900 V900R011
Transpor t
6/9/2013
Page26of316
150682621.xls.ms_office
Security Level:
AVD1
BSC6900
Whether to trigger Boolean alarms at a high or low level. Each bit indicates whether to trigger the alarm associated with a specific Boolean at a high or low level. If the bit is set to 1, the Boolean alarm is triggered when the Boolean is at a high level. If the bit is set to 0, the Boolean alarm is triggered SET when the BTSALM(Option Boolean is at GBFDal) a low level. 111202 Whether to trigger Boolean alarms at a high or low level. Each bit indicates whether to trigger the alarm associated with a specific Boolean at a high or low level. If the bit is set to 1, the Boolean alarm is triggered when the Boolean is at a high level. If the bit is set to 0, the Boolean alarm is triggered SET when the BTSALM(Option Boolean is at GBFDal) a low level. 111202 Whether to trigger Boolean alarms at a high or low level. Each bit indicates whether to trigger the alarm associated with a specific Boolean at a high or low level. If the bit is set to 1, the Boolean alarm is triggered when the Boolean is at a high level. If the bit is set to 0, the Boolean alarm is triggered when the Boolean is at a low level. Whether to trigger Boolean alarms at a high or low level. Each bit indicates whether to trigger the alarm associated with a specific Boolean at a high or low level. If the bit is set to 1, the Boolean alarm is triggered when the Boolean is at a high level. If the bit is set to 0, the Boolean alarm is triggered when the Boolean is at a low level. This parameter is Whether to trigger Boolean alarms at a high or low level. Each bit indicates whether to trigger the alarm associated with a specific Boolean at a high or low level. If the bit is set to 1, the Boolean alarm is triggered when the Boolean is at a high level. If the bit is set to 0, the Boolean alarm is triggered when the Boolean is at a low level. This parameter is Phase tag for GSM protocols supported by the A interface. The value of this parameter is chosen according to the A interface phase tag provided by the MSC.
O&M of BTS
0~255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
AVD2
BSC6900
O&M of BTS
0~255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
AVD3
BSC6900
GBFD111202
O&M of BTS
0~255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
AVD4
BSC6900
GBFD111202
O&M of BTS
0~255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
AVD5
BSC6900
GBFD111202
O&M of BTS
0~255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
AVer
A Interface Tag
BSC6900
GBFD111804
Enumeration Type
"GSM_PHASE_2" is recommended in common scenarios. If the BSC needs to support GPRS services, EDGE services, AMR services, eMLPP services, inter-RAT handover, and A over Generally, the value of IP mode, this parameter is equal "GSM_PHASE_2Plus" BSC69 to "Um Interface Tag" is recommended. 00 and "Um Interface Tag".
Not involved
Not involved
None
Equipme nt
AVL
BSC6900
Whether the Boolean alarm is triggered at the high level or low level. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another MRFDmode. 210304
Faulty Management
NO1, NO2, NO3, NO1, NO2, NO3, NO4, NO5, NO6, NO4, NO5, NO6, NO7, NO8 NO7, NO8
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page27of316
150682621.xls.ms_office
Security Level:
AVL
BSC6900
AVOL
Alarm level
BSC6900
AVOL
Alarm VOL.
BSC6900
This parameter consists of seven bits, each of which indicates whether the correspondin g Boolean alarm is triggered at the low level or high level. The bit value 0 indicates that the alarm is triggered at the low level, and the bit value 1 indicates that tlhe alarm is triggered at the high level. In multi-mode scenario, the value of this parameter in this mode SET must be the BTSDPMUBP(O same as the ptional) value of the SET Alarm level ALMPORT(Optio for a digital nal) port level. Alarm SET It is valid for BTSENVALMPO the digital RT(Optional) port.
NO1, NO2, LIGHT_ARR, NO1, NO2, NO4, NO5, NO6, LIGHT_ARR, NO4, NO7 NO5, NO6, NO7 LOW(LOW), HIGH(HIGH) LOW(LOW), HIGH(HIGH) O1E3_R1E4(OC CUR:1E-3, RECOVERY:1E4), O1E4_R1E5(OC CUR:1E-4, RECOVERY:1E5), O1E5_R1E6(OC CUR:1E-5, RECOVERY:1E6), O1E6_R1E7(OC CUR:1E-6, RECOVERY:1E7), O1E7_R1E8(OC CUR:1E-7, RECOVERY:1E8), O1E8_R1E9(OC CUR:1E-8, RECOVERY:1E9), O1E9_R1E10(O CCUR:1E-9, RECOVERY:1E10), O1E10_R1E11( OCCUR:1E-10, RECOVERY:1E11), O1E11_R1E12( OCCUR:1E-11, O1E3_R1E4(OC CUR:1E-3, RECOVERY:1E4), O1E4_R1E5(OC CUR:1E-4, RECOVERY:1E5), O1E5_R1E6(OC CUR:1E-5, RECOVERY:1E6), O1E6_R1E7(OC CUR:1E-6, RECOVERY:1E7), O1E7_R1E8(OC CUR:1E-7, RECOVERY:1E8), O1E8_R1E9(OC CUR:1E-8, RECOVERY:1E9), O1E9_R1E10(O CCUR:1E-9, RECOVERY:1E10), O1E10_R1E11( OCCUR:1E-10, RECOVERY:1E11), O1E11_R1E12( OCCUR:1E-11, O1E4_R1E5(OC CUR:1E-4, RECOVERY:1E5), O1E5_R1E6(OC CUR:1E-5, RECOVERY:1E6), O1E6_R1E7(OC CUR:1E-6, RECOVERY:1E7), O1E7_R1E8(OC CUR:1E-7, RECOVERY:1E8), O1E8_R1E9(OC CUR:1E-8, RECOVERY:1E9), O1E9_R1E10(O CCUR:1E-9, RECOVERY:1E10), O1E10_R1E11( OCCUR:1E-10, RECOVERY:1E11) O1E4_R1E5(OC CUR:1E-4, RECOVERY:1E5), O1E5_R1E6(OC CUR:1E-5, RECOVERY:1E6), O1E6_R1E7(OC CUR:1E-6, RECOVERY:1E7), O1E7_R1E8(OC CUR:1E-7, RECOVERY:1E8), O1E8_R1E9(OC CUR:1E-8, RECOVERY:1E9), O1E9_R1E10(O CCUR:1E-9, RECOVERY:1E10), O1E10_R1E11( OCCUR:1E-10, RECOVERY:1E11)
None None
None
BTS
None
Not involved
Not involved
None
LOW, HIGH
None None
None
None
None
Not involved
Not involved
None
LOW, HIGH
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
BSC6900
SET OPT(Optional)
None
None
Enumeration Type
None None
None
Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
SET OPT(Optional)
None
None
Enumeration Type
None None
None
Board
None
Not involved
Not involved
None
Equipme nt
B3SDTHRD
BSC6900
SET OPT(Optional)
None
None
Enumeration Type
None None
None
Board
None
Not involved
Not involved
None
Equipme nt
B3SFTHRD
BSC6900
SET OPT(Optional)
None
None
Enumeration Type
None None
None
Board
None
Not involved
Not involved
BSC6900
SET CLK(Optional)
MRFD210502
BSC/RNC Clock
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
Board
None
Not involved
Not involved
BSC6900
SET CLK(Optional)
BackupPath
Backup Path
BSC6900
BSC6900
BKP Directory for LOGDB(Optional saving the ) backup file Path (complete BKP path) of the DB(Optional) backup file.
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
Board
None
Not involved
Not involved
None Each backplan e board 8K clock has only one clock source. You are not allowed to turn on the same backplan e board 8K clock switch for multiple interface boards. Each backplan e board 8K clock has only one clock source. You are not allowed to turn on the same backplan e board 9K clock switch for multiple interface boards.
Equipme nt
Equipme nt
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
String Type
None
0~200 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
MRFD210301
Configuration Management
String Type
None
0~128 characters
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
6/9/2013
Page28of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
Quality threshold for determining that a call is disconnected because of poor quality. If the uplink quality or downlink quality in the measurement reports during the period of "Timer for Bad Quality DISC Statistic" is higher than the value of this parameter before the call is disconnected , you can infer that the call disconnection is due to SET poor quality. GCELLSOFT(O This ptional) parameter Whether the downlink TBF can be established in advance. Downlink TBF establishmen t in advance indicates that the downlink TBF is established immediately after the MS establishes the uplink TBF rather than establishing the downlink TBF after the SET SGSN sends BSCPSSOFTPA the data RA(Optional) block. Bar code 2 ADD BTSESN(Option al) of the interface board of the BTS
GBFD111004
0~70
None None
55 Cell
None
Not involved
Not involved
None
Equipme nt
GBFD114101
GPRS
Enumeration Type
CLOSE(Close), LOCALTLLI(Loc al TLLI Opt), CLOSE, ALLTLLI(All TLLI LOCALTLLI, Opt) ALLTLLI
None None
ALLTLLI
BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
BSC6900
None
None
String Type
None
1~64 characters
None None
None
BTS
None
Not involved
Not involved
BAKIP
BSC6900
IP Address Type
None
None
None
None
Not involved
Not involved
BAKMASK
BSC6900
BSC6900
BSC6900
STR Mask of the IPCHK(Optional) backup Backup port power saving method for the BTS. If this parameter is set to BYTRX, when the BTS switches from the mains to batteries, the BTS shuts down TRXs. If this parameter is set to BYPWR, when the BTS switches from the mains to batteries, the SET BTS BTSBAKPWR(M decreases andatory) the power of Backup power saving policy for the BTS. If this parameter is set to BYCOVER, when the BTS switches from the mains to batteries, the BTS shuts down certain TRXs and after a while decreases the power of the TRX that carries the main BCCH. If this parameter is set to BYCAP, when the BTS switches from the mains to SET batteries, the BTSBAKPWR(O BTS ptional) decreases Whether the cells at the 1900 frequency support high frequency 1900 Whether the cells at the 850 frequency support high frequency 1900 Whether the cells at the 900 frequency support high frequency 1900
GBFD118609
IP Address Type
None
None
Not involved
Not involved
None To modify this paramete r, run "STP GATEW AYCHK" first and then "STR GATEW AYCHK". To modify this paramete r, run "STP GATEW AYCHK" first and then "STR GATEW AYCHK".
Transpor t
Transpor t
Transpor t
GBFD111605
Enumeration Type
None None
None
BTS
This parameter can work with "BTSPOWEROFFLOCK BCCH" in "SET BTSLOCKBCCH" to determine whether to shut down the TRX that Read & carries the main BCCH. Write
Not involved
Not involved
None
Equipme nt
GBFD111605
Enumeration Type
BYCOVER(Cove r Priority), BYCAP(Capabilit y Priority), BYSAVING(Savi BYCOVER, BYCAP, ng Priority) BYSAVING None None
BYCOVER
BTS
This parameter is valid only when "BAKPWRSAVMETHOD Read & " is set to BYPWR. Write
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD114401
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD114401
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD114401
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
BANTIME
BSC6900
BARCODLS T
BSC6900
Duration in which intracell handover is forbidden after the number of consecutive intra-cell handovers reaches the maximum. Intra-cell handover can be conducted SET again only GCELLHOAD(O after this ptional) duration. List of bar SET codes of all BTSRACKBC(M the cabinets andatory) in the BTS The
GBFD110601 GBFD510501
1~200
None
20 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
GBFD111202
O&M of BTS
String Type
None
1~80 characters
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BASEBTSID
BSC6900
reference BTS must support the Um interface software synchronizati GBFDon. 118201
SoftSynchronized Network
0~2047
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
6/9/2013
Page29of316
150682621.xls.ms_office
Security Level:
BASETEMP ERATURE
Number of the temperature sensor correspondin g to a battery group. You can choose sensor 1 (Battery1Te mp) or sensor 2 (Battery2Te mp). If you choose sensor 1, the system automatically uses sensor 1 to control the temperature of the battery group and performs temperature compensatio n, high temperature protection, and overtemperat ure alarm GBFDaccordingly. 111202
O&M of BTS
Enumeration Type
None None
BTS
None
Not involved
Not involved
None
Equipme nt
BASETEMP ERATURE
Number of the temperature sensor correspondin g to a battery group. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Battery capacity. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Whether the configuration of external battery is allowed. The value "YES" indicates that the external battery can be configured, and the value "NO" indicates that the external battery cannot be configured. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Allowed percentage of the battery discharging. After the AC power supply is cut and the power of the battery is discharged by the value of this SET parameter, BTSAPMUBP(O the diesel ptional) engine is SET started to BTSDPMUBP(O supply the GBFDptional) power. 111202 Battery type. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
30~1000
Ah
None
50 BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
0~90
per cent
None
50 BTS
None
Not involved
Not involved
None
Equipme nt
BATTTYPE
Battery Type
BSC6900
O&M of BTS
Enumeration Type
NO_BAT(No Storage Battery), LEADACID_BAT (Lead Acid Battery), NO_BAT, LITHIUM_BAT(Li LEADACID_BAT, thium Battery) LITHIUM_BAT
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Number of SET the BBAP SCTPSRVPORT service (Optional) listening port Reference difference between uplink and downlink levels. This parameter works with "Up down balance floating fange" to SET count uplinkGTRXRLALM(O downlink ptional) imbalances.
None
None
1024~65535
None None
None
SCTP link
The services are interrupted until the SCTP link is working normally.
The paramete r modificati on should be negotiate d with the peer end, and the BSC should be reset after the modificati on. It is recomme nded that this paramete r should not be modified when the The BSC should be reset to system is validate the parameter running. modification. None
Transpor t
BBDIF
BSC6900
GBFD110801 GBFD110802
0~254
None None
8 TRX
This parameter is valid only when "WLNKALMFLAG" is set Read & to YES. Write
Not involved
Not involved
None
Equipme nt
BC
Battery Capcity
BSC6900
BCC
BCC
BSC6900
Battery capacity. The battery capacity should be set according to the vendor specification. If it is improperly configured, the battery life may be shortened. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202
0~3000
Ah
36 None
BTS
None
Not involved
Not involved
None
0~7
None None
None
Cell
None
Cell
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt
Radio
6/9/2013
Page30of316
150682621.xls.ms_office
Security Level:
BCC
BCC
BSC6900
Base station color code (BCC) of a cell, provided by the network planning department. It is used for differentiating the neighbor cells around using a same BCCH frequency. A BCC and a network color code (NCC) compose a base station identity code MRFD(BSIC). 210301 BTS color code. It uniquely identifies different BTSs that are adjacent and use the same TRX. BCCH frequency of the cell
Configuration Management
0~7
None None
None
Cell
None
Cell
None
Radio
BCC
BCC
BSC6900
BCCH
BCCH FD
BSC6900
GBFD510702 MRFD210301
Compact BTS Automatic Capacity Planning Configuration Management Compact BTS Automatic Capacity Planning Frequency Hopping (RF hopping, baseband hopping)
0~7
None None
None
BTS
None
Not involved
Not involved
None
0~1023
None None
None
Cell
None
Cell
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
Radio
BCCHFREQ
BSC6900
0~1023
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
Frequency hopping SET mode of the GCELLHOPQUI TRX that CKSETUP(Mand carries the atory) BCCH
GBFD113701
Enumeration Type
NO_Hop, Hop
None None
None
Cell
None
Cell
None
None
Radio
BSC6900
Threshold for reporting the BC congestion alarm. When the BC congestion level exceeds the threshold, the BC SET congestion BSCPSSOFTPA alarm is GBFDRA(Optional) reported. 510002 Threshold for clearing the BC congestion alarm. When the BC congestion level is below the threshold, the BC SET congestion BSCPSSOFTPA alarm is GBFDRA(Optional) cleared. 510002 DSCP correspondin SET g to the BSCPSTCDSCP background MAP(Optional) service. Identifies one STR BC at the FRPORTLOOP( same port. Mandatory) The BCID's BLK value range BC(Mandatory) of PEUa ADD board is BC(Mandatory) 0~255 and ADD that of POUc NSVC(Mandator board is y) 0~511. Current limit coefficient of the battery. The maximum charging current equals the value of "Battery Current Limiting Coefficient" multiplexed by "Battery Capacity". If the charging current is 5 A higher than the maximum charging current, the overcharge alarm is reported. In multi-mode scenario, the value of this parameter in this mode must be the SET same as the BTSAPMUBP(O value of the ptional) correspondin
Gb Over FR
0~100
per cent
None
80 BSC
None
Not involved
Not involved
None
Equipme nt
BSC6900
Gb Over FR
0~100
per cent
None
60 BSC
None
Not involved
Not involved
None
Equipme nt
BCDSCP
GBFD118603
Gb over IP
0~63
None None
0 BSC
None
Not involved
Not involved
None
Transpor t
BCID
BC Identifier
BSC6900
GBFD510002
Gb Over FR
0~511
None None
None
BC
None
Not involved
Not involved
None
Equipme nt
BCLC
GBFD111202
O&M of BTS
5~25
per cent
None
If "Power System Type" is "APM30", the recommended value is "7". For other Power System Type, the recommended value is "15". BTS
None
Not involved
Not involved
None
Equipme nt
BCV
Boost-Charging Voltage
BSC6900
BoostCharging Voltage. See the vendor specification for the setting of this parameter. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202 Whether the configuration of external battery is allowed. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202 ARP1 priority in the BE service. ARP1 priority weight determines the number of the budget blocks and the block scheduling GBFDpriority. 119902 ARP2 priority in the BE service. ARP2 priority weight determines the number of the budget blocks and the block scheduling GBFDpriority. 119902 ARP3 priority in the BE service. ARP3 priority weight determines the number of the budget blocks and the block scheduling GBFDpriority. 119902
O&M of BTS
None
565 BTS
The value of this parameter must be greater than "Float charging voltage" and at least two volts lower than "DC Voltage Upper Threshold".
Not involved
Not involved
None
Equipme nt
BE
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BEARP1PRI WEIGHT
BSC6900
1~10
None None
8 Cell
None
Not involved
Not involved
None
Radio
BEARP2PRI WEIGHT
BSC6900
1~10
None None
4 Cell
None
Not involved
Not involved
None
Radio
BEARP3PRI WEIGHT
BSC6900
1~10
None None
2 Cell
None
Not involved
Not involved
None
Radio
BEARTYPE
BSC6900
DSP bearer type. It indicates whether the lower layer ADD bearer is the N7DPC(Mandato MTP3 or ry) M3UA. None
None
Enumeration Type
None None
None
SCCP
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
BEARTYPE
BSC6900
None
None
Enumeration Type
MTP2(MTP2), SAAL(SAAL)
MTP2, SAAL
None None
None
MTP3 link
None
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page31of316
150682621.xls.ms_office
Security Level:
BEATSENDI NGDIS
Time interval for sending a handshake SET message GBSCREDGRP( between GBFDOptional) BSCs. 113725 Average period for sending the measurement SET report over GCELLEGPRSP the EGPRS GBFDARA(Optional) channel. 114201 Number of UTRAN TDD cells that should be SET included in GCELLCCUTRA measurement GBFDNSYS(Optional) report 114302 SET GCELLHOUTRA NFDD(Optional) SET GCELLHOUTRA NTDD(Optional) Whether to enable the algorithm for GBFDthe handover 110601 to a better GBFD3G cell 510501 Whether to enable the algorithm for the handover to a better GBFDcell 510501 According to the P/N rule, if the conditions for the handover to a better cell due to interference are met for P seconds within N seconds, the handover is triggered. This parameter specifies the GBFDnumber P. 510501 According to the P/N rule, if the conditions for the handover to a better cell due to interference are met for P seconds within N seconds, the handover is triggered. This parameter specifies the GBFDnumber N. 510501
1~60
BSC69 1 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
EGPRS
0~10
None None
5 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GSM/TDSCDMA Interoperability
0~3
None None
1 Cell
None This parameter is valid only when "INTERRATOUTBSCHO EN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
Radio
BET3GHOE N
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
Not involved
Not involved
None
Radio
BSC6900
HUAWEI II Handover
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM2. Write
Not involved
Not involved
None
Radio
BSC6900
HUAWEI II Handover
1~16
None
2 Cell
This parameter is valid only when "BETTERCELLHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "BETTERCELLSTATTIM E" >= "BETTERCELLLASTTIM Read & E". Write
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time, thus the voice quality is decreased and call drops may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
BSC6900
HUAWEI II Handover
1~16
None
3 Cell
This parameter is valid only when "BETTERCELLHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "BETTERCELLSTATTIM E" >= "BETTERCELLLASTTIM Read & E". Write
Not involved
Not involved
None
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, The parameter modification handovers cannot be performed in time. has no impact on the Thus the voice quality is decreased and Versions earlier than equipment. call drops may occur. BSC6900 V900R011
Radio
BSC6900
Timeout times of the BFD packet. If several consecutive BFD packets are not received, the BFD session STR is set to the GBFDIPCHK(Optional) DOWN state. 118609 ADD BTSBFD(Mandat ory) ADD BTSIPRTBIND( BFD Session Mandatory) No. Allowed fluctuation of the difference between uplink and downlink levels relative to the reference difference. If the difference between uplink and downlink levels is outside the fluctuation range, the uplink and downlink are considered imbalanced. For example, assume that the Up Down Balance Basic Difference is set to 8 and SET that the Up GTRXRLALM(O Down ptional) Balance Mutual-aid changeback policy of baseband frequency hopping (FH). If multiple TRXs in a baseband FH group are faulty and changeback is needed after mutual aid of the baseband FH TRXs occurs: If you choose ALL, mutualaid changeback is implemented after all the TRXs in the FH group recover; if you choose PART, as long as any of the faulty SET TRXs GCELLCCACCE recovers, it is SS(Optional) changed SET BTSEXCURSIO N(Mandatory) SET BSCSYNCOFF( Mandatory)
3~10
None
Not involved
Not involved
Not involved
None
Transpor t
BFDSN
BSC6900
GBFD118609
1~2
None None
None
Not involved
Not involved
None
Transpor t
BFRANGE
BSC6900
GBFD110801 GBFD110802
10~254
None None
30 TRX
This parameter is valid only when "WLNKALMFLAG" is set Read & to YES. Write
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD113801
TRX Cooperation
Enumeration Type
ALL(All), PART(Part)
ALL, PART
None None
ALL
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BITOFFSET
GBFD118201
SoftSynchronized Network
-10000~10000
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
BKGARP1P RIWEIGHT
ARP1 priority in the Background service. ARP1 priority weight determines the number of the budget blocks and the block scheduling GBFDpriority. 119902 ARP2 priority in the Background service. ARP2 priority weight determines the number of the budget blocks and the block scheduling GBFDpriority. 119902 ARP3 priority in the Background service. ARP3 priority weight determines the number of the budget blocks and the block scheduling GBFDpriority. 119902
1~10
None None
4 Cell
None
Not involved
Not involved
None
Radio
BKGARP2P RIWEIGHT
1~10
None None
2 Cell
None
Not involved
Not involved
None
Radio
BKGARP3P RIWEIGHT
1~10
None None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
Base Station SET Controller ALMBLKSW(Opt alarm blink MRFDional) filter switch 210304
Faulty Management
Enumeration Type
None None
None
If you set "Switch of stat blinking alarm" to "ENABLE", you need to set "Alarm switch of BSC69 blinking filter" to Read & 00 "ENABLE". Write
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page32of316
150682621.xls.ms_office
Security Level:
BLKPRD
BSC6900
Alarm blink filter threshold. When the interval between the generation and clearance of an alarm is equal to or smaller than the alarm blink filter threshold, the alarm is filtered and not reported MRFDto the NMS. 210304
Faulty Management
0~65534
None
None
BSC69 00 None
Not involved
Not involved
BSC6900
Measuremen t period of filtered Base SET Station ALMBLKSW(Opt Controller MRFDional) alarms 210304 Switch controlling whether to perform statistics of SET Base Station ALMBLKSW(Opt Controller MRFDional) alarms 210304 Retry times after the peer response timer expires during NSVC GBFDblocking. 510002 Duration of the peer response timer during NSVC blocking.
Faulty Management
60~65534
None
None
BSC69 00 None
Not involved
Not involved
To disable the alarm blink filter function, set this paramete r to "0". To enable the alarm blink filter function, set this paramete r to a value greater than 0 and turn on the alarm blink filter switch. See "SET ALMBLK SW" for setting the alarm blink filter switch. To enable the alarm blink filter function, set "Alarm switch of blinking filter" and "Switch of stat blinking alarm" to "ENABLE ".
BSC6900 V900R011
Equipme nt
BSC6900 V900R011
Equipme nt
Faulty Management
Enumeration Type
None None
None
If you set "Switch of stat blinking alarm" to "ENABLE", you need to set "Alarm switch of BSC69 blinking filter" to Read & 00 "ENABLE". Write
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BLOCKRET RY
Block Retry
BSC6900
Gb Over FR
1~6
None None
4 BSC
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD510002
Gb Over FR
1~120
None
10 BSC
None
Not involved
Not involved
None
Equipme nt
BMPN
BM Port No
BSC6900
BM port No. where one end of the ATER ADD connection ATERCONPATH channel is (Mandatory) located BM slot No. where one end of the ATER ADD connection ATERCONPATH channel is (Mandatory) located BM subrack No. where one end of the ATER ADD connection ATERCONPATH channel is (Mandatory) located
None
None
0~335
None None
None
Not involved
Not involved
Not involved
None
Equipme nt
BMSN
BM Slot No
BSC6900
None
None
0~5, 8~27
None None
None
Not involved
Not involved
Not involved
None
Equipme nt
BMSRN
BM Subrack No
BSC6900
None
None
0~11
None None
None
Not involved
Not involved
Not involved
None
Equipme nt
BSC6900
Duration of the flow control protection timer enabled during the flow control between the SET TCS and the BSCTMR(Option MPS/EPS GBFDal) subracks 111705 Whether the device address is borrowed by the local address. If this parameter is set to YES, it indicates that ADD the device IP PPPLNK(Mandat is borrowed; ory) otherwise, ADD the device IP MPGRP(Mandat is not ory) borrowed. Whether to SET report the BOXRPT(Manda alarm to the tory) alarm box
0~5000
None
This parameter is valid when "BMTCFFLAG" in BSC69 the "SET BSCFCPARA" 1000 00 command is set to ON.
Not involved
Not involved
If the value of this paramete r is too small, the SCUs of the TC subrack may remain congeste d. If the value is too large, the call failure rate may retain a higher value for The parameter modification a longer has no impact on the time. equipment. None
Equipme nt
BSC6900
GBFD118611 GBFD118622
Enumeration Type
NO, YES
None None
No
MP group
None
Not involved
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
boxflg
MRFD210304
Faulty Management
Enumeration Type
nonrpt, rpt
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BP1
BSC6900
Position of break point 1 in an RXU chain. The number of break points must not be greater than the number of RXU boards in the GBFDRXU chain. 111202 Position of break point 2 in an RXU chain. The number of break points must not be greater than the number of RXU boards in the RXU chain. Whether to enable the bad quality (BQ) handover algorithm. Whether to trigger BQ handover depends on the uplink and downlink transmit quality (measured by using BER). If the uplink or downlink BQ exceeds the BQ handover threshold, emergency BQ handover is triggered. The possible causes of BER increase (or quality degradation) include too low signal power and
O&M of BTS
Enumeration Type
0, 1, 2, 3, 4, 5, 6, NULL
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BP2
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
0, 1, 2, 3, 4, 5, 6, NULL
None None
None
BTS
The value of this parameter must be greater than or equal to "Position of Break Point 1".
Not involved
Not involved
None
Equipme nt
BQHOEN
BQ HO Allowed
BSC6900
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
BSC6900
According to the P/N rule, if the conditions for emergency BQ handover are met in P of N measurement reports, the handover is triggered. This parameter specifies the GBFDnumber P. 510501
HUAWEI II Handover
1~16, step:0.5
None
1 Cell
This parameter is valid only when "BQHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "BQSTATTIME" >= Read & "BQLASTTIME". Write
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time. Thus, the voice quality is decreased and call drops may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
6/9/2013
Page33of316
150682621.xls.ms_office
Security Level:
BQMARGIN
BQ HO Margin
BSC6900
If ("downlink level of the neighbor cell after filtering" - "downlink level of the serving cell (after power control compensatio n)") > ("Intercell HO Hysteresis" "BQ HO Margin" + 64), the BQ handover to GBFDADD the neighbor 110601 G2GNCELL(Opti cell is GBFDonal) triggered. 510501 According to the P/N rule, if the conditions for emergency BQ handover are met in P of N measurement reports, the handover is triggered. This parameter specifies the GBFDnumber N. 510501
0~127
dB
None
69 Cell
None
Not involved
Not involved
When the M900/M1 800 BSC is upgraded to BSC6000 , this paramete r needs to be set to 69. If this paramete r is not set to 69 in this case, the handover algorithm supporte d by this paramete The parameter modification r is has no impact on the invalid. equipment. None
Radio
HUAWEI II Handover
1~16, step:0.5
None
1 Cell
This parameter is valid only when "BQHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "BQSTATTIME" >= Read & "BQLASTTIME". Write
Not involved
Not involved
None
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, The parameter modification the handover cannot be performed in has no impact on the time. Thus, the voice quality is decreased Versions earlier than equipment. and call drops may occur. BSC6900 V900R011
Radio
BRDCLASS
Board Class
BSC6900
Classes of boards classified according to STR function BKP(Mandatory) modules Classes of boards classified according to ADD function BRD(Mandatory) modules SET FCSW(Mandator y) SET FCCPUTHD(Man datory) SET FCMSGQTHD(M andatory) SET CPUTHD(Manda tory) STR BTSLOG(Manda tory) STR BTSVSWRTST( Optional) ADD BTSBRDCAP(M andatory) ADD BTSRXUBRD(O ptional)
MRFD210301
Configuration Management
Enumeration Type
SCU, GCU, XPU, SCU, GCU, XPU, INT, TNU INT, TNU
None None
None
None
None
Not involved
Not involved
None
Equipme nt
BRDCLASS
Board Class
BSC6900
MRFD210301
Configuration Management
Enumeration Type
INT, DPU, XPU, INT, DPU, XPU, TNU, OMU, SAU TNU, OMU, SAU
None None
None
None
None
Not involved
Not involved
None
Equipme nt
BRDCLASS
Board Class
BSC6900
Classes of boards classified according to function modules Number of the board Number of the RF frontend board in the BTS
MRFD210301 GBFD111202
Configuration Management
Enumeration Type
SCU, GCU, XPU, SCU, GCU, XPU, DPU, INT, TNU DPU, INT, TNU
None None
None
None
None
Not involved
Not involved
None
BRDNO
Board No.
BSC6900
O&M of BTS
0~72
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt Equipme nt
BSC6900 V900R011
BRDNO
Board No.
BSC6900
GBFD111202
O&M of BTS
0~47
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BRDRXBW
O&M of BTS
BSC6900
GBFD111202
O&M of BTS
Interval Type 0~1000 DATM_MAIN, DATU_MAIN, DDPM_MAIN, DDPU_MAIN, DDRM_MAIN, DEMU_MAIN, DFCU_MAIN, DGPS_MAIN, DHEU_MAIN, DOMU_MAIN, DPMU_MAIN, DPTU_MAIN, DRFU_MAIN, DRFUBOOT_MA IN, DRRU_MAIN, DRRUBOOT_MA IN, DRU_MAIN, DTCU_MAIN, DTMU_MAIN, DTRU_MAIN, ETR_MAIN, FMU_MAIN, FMUA_MAIN, GATM_MAIN, GTMU_MAIN, IASU_MAIN, IOMU_MAIN, MFU_3001C, MMU_3001C, MRRU_MAIN, MTR_MAIN, NFCB_MAIN, Enumeration PBU_MAIN, Type QTRU_MAIN,
0~100 (step: 0.1) kbit/s None DATM_MAIN, DATU_MAIN, DDPM_MAIN, DDPU_MAIN, DDRM_MAIN, DEMU_MAIN, DFCU_MAIN, DGPS_MAIN, DHEU_MAIN, DOMU_MAIN, DPMU_MAIN, DPTU_MAIN, DRFU_MAIN, DRFUBOOT_MAIN, DRRU_MAIN, DRRUBOOT_MAIN, DRU_MAIN, DTCU_MAIN, DTMU_MAIN, DTRU_MAIN, ETR_MAIN, FMU_MAIN, FMUA_MAIN, GATM_MAIN, GTMU_MAIN, IASU_MAIN, IOMU_MAIN, MFU_3001C, MMU_3001C, MRRU_MAIN, MTR_MAIN, NFCB_MAIN, PBU_MAIN, QTRU_MAIN, None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BRDTXBW
O&M of BTS
Interval Type 0~1000 PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, EIUa, OIUa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, XPUa, SPUb, XPUb, DPUa, DPUb, DPUc, DPUd, DPUe, TNUa, OMUa, OMUb, SAUa
kbit/s None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BRDTYPE
Board Type
BSC6900
BRDTYPE
Board Type
BSC6900
MRFD210301 MRFD210301
PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, EIUa, OIUa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, XPUa, SPUb, XPUb, DPUa, DPUb, DPUc, DPUd, DPUe, TNUa, OMUa, OMUb, SAUa None None
None
None
None
Not involved
Not involved
None
DPUa, DPUc
DPUa, DPUc
None None
None
Board
None
BSC6900
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt Equipme nt
BSC6900 V900R011
BRDTYPE
Board type.
BSC6900
SET ETHPORT(Mand atory) Board type ADD PPPLNK(Mandat ory) Board type ADD MPGRP(Mandat ory) ADD MPLNK(Mandato ry) Board type ADD Type of the BTSBRDCAP(M new RXU andatory) board. Type of the board. The type can be TMU/DTMU, DTRU, DPTU, QTRU, MRRU, GRRU, BTS3900B, MRFU, GRFU, BTS3900E, STR DRFU, BTSLOG(Manda DRRU, or tory) UBRI. To avoid intermittent blinking, the switchover cannot be performed over a certain period of time when the OML is disconnected . That period of time is specified as SET ring II wait BTSRINGATTR( time before Optional) switch. Contents of a SET cell GCELLSBC(Opti broadcast onal) message Time interval SET for a cell GCELLSBC(Opti broadcast onal) message
BRDTYPE
Board type
BSC6900
Enumeration Type
None
Not involved
Not involved
Not involved
None
Transpor t
Enumeration Type
None
BSC69 00 None
Not involved
Not involved
None
Transpor t
BRDTYPE
Board type
BSC6900
BrdType
Board Type
BSC6900
O&M of BTS
PEUa, POUa, POUc MRRU, GRRU, MRFU, GRFU, BTS3900E TMU(TMU/DTMU ), DTRU(DTRU), DPTU(DPTU), QTRU(QTRU), MRRU(MRRU), GRRU(GRRU), BTS3900B(BTS3 900B), MRFU(MRFU), GRFU(GRFU), BTS3900E(BTS3 900E), DRFU(DRFU), DRRU(DRRU), UBRI(UBRI)
PEUa, POUa, POUc None None MRRU, GRRU, MRFU, GRFU, BTS3900E None None
None
BSC69 00 None
Not involved
Not involved
None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Equipme nt
BRDTYPE
Board Type
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
TMU, DTRU, DPTU, QTRU, MRRU, GRRU, BTS3900B, MRFU, GRFU, BTS3900E, DRFU, DRRU, UBRI
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
GBFD117802
0~255
None
None
BTS
The setting of this parameter must meet the following condition: "FallBack Start Time" > "Ring II Wait Time Before Switch" + "Ring II Try Rotating Duration Read & Time". Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
BROADCAS TCONTENT
GBFD113602
String Type
None
1~80 characters
None None
None
Cell
None
Not involved
Not involved
None
Radio
BROADCAS TINTERVAL
Broadcast Interval
BSC6900
GBFD113602
2~3600
None
60 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page34of316
150682621.xls.ms_office
Security Level:
BS
Backup Style
BSC6900
Backup mode of the log. If "ENTIRE" is selected, all logs in the current database are backed up. If "INCREMEN TAL" is selected, the logs generated GBFDBKP after last 111203 LOGDB(Optional backup are MRFD) backed up. 210305
Enumeration Type
RNC
None
Not involved
Not involved
BSC6900
BS-AG-BLKSRES, indicating the number of the CCCH message blocks reserved for the AGCH. After the CCCHs are configured, the value of this parameter indicates actually the seizure rates of the AGCHs and SET the PCHs GCELLIDLEBAS over the GBFDIC(Optional) CCCHs. 111003 DPC of the external BSC, which is used for inter-BSC communicatio n. This parameter can be represented in decimal, hexadecimal, and binary. By default, this parameter is represented in decimal. To represent this parameter in hexadecimal, precede this parameter value with H'. To represent this parameter in binary, ADD precede this EXTBSC(Mandat parameter GBFDory) value with B'. 118602 Whether to enable the BSC to shut down the power SET amplifier of a BSCDSTPA(Opti TRX GBFDonal) dynamically 111602 It indicates BLK whether the ACIC(Mandatory A interface ) E1/T1 is the ADD primary BSC AE1T1(Mandator or secondary y) BSC. Gateway IP address of the BSC. When the BSC provides the function of simple cell broadcast, the BSC sends cell broadcast messages through this IP address ADD defined by GCBSADDR(Ma this ndatory) parameter.
0~7
None None
1 Cell
None
Not involved
Not involved
None As defined in the protocol, the value of this paramete r cannot be 0 in the following cases: The BSC needs to send system message s over the extended BCHs. CBCHs are configure d. When the GSMR is enabled, NCHs are configure d.
Equipme nt
The setting of this parameter may affect the MS paging response and performance The parameter modification of the system. A greater value may has no impact on the decrease the number of paging blocks, Versions earlier than equipment. paging capacity, and paging success rate. BSC6900 V900R011
Radio
BSCDPC
A over IP
1~16777215
None None
None
BSC69 00 None
Not involved
Not involved
None
Transpor t
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSCFLAG
BSC Flag
BSC6900
GBFD111803
Enumeration Type
None
E1/T1 link
None
Not involved
Not involved
None
Transpor t
BSC6900
GBFD113601
None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
SoftSynchronized Network
Compound Type
hour, min
hour{0~23} min{0~59}
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
BSC6900
BSCID
BSC ID
BSC6900
Start time for collecting the inter-BSC offset GBFDinformation. Unique ID of 118201 one BSC in ADD the TC ADJNODE(Mand POOL atory) scenario None ADD AISSCFG(Optio nal) ADD GEXT2GCELL( Optional) ADD EXTBSC(Mandat ory) ID of the BSC that controls the external 2G neighbor cell Period for fine tuning the BTS clock between BSCs.
SoftSynchronized Network
Compound Type
hour, min
hour{0~23} min{0~59}
None None
None
BSC69 00 None
Not involved
Not involved
None.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
None
0~15
None None
None
Not involved
Not involved
None
Equipme nt
BSCIDX
BSC Index
BSC6900
MRFD210301
Configuration Management
0~15
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD118201
SoftSynchronized Network
5~60
5 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
BSCIP
BSC IP
BSC6900
IP address of the BSC. If the connection mode of the BSC and the CBC is to lead cables out of the PIU, the value of this parameter must be the same as the preset IP address of the PIU port. If the connection mode is to lead cables out of the XPU panel, the value of this parameter must be the same as the preset IP ADD address of GCBSADDR(Ma the XPU GBFDndatory) panel. 113601 ADD BTSAUTOPLAN( Mandatory) SET BTSIP(Optional) IP address of the interface board on the BSC. Conditions for enabling the function of BSC local switching. UNCONDITI ONALSTART : The function of BSC local switching is enabled without restriction. ATERCONG ESTS: The function of BSC local switching is enabled when the congestion rate of the Ater interface exceeds the value of "Ater Cong Thres for BSC LocalSwitch". PREFIXNUM BER: The function of BSC local SET switching is BSSLS(Optional) enabled
None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSCIP
BSC IP
BSC6900
GBFD118601
Abis over IP
IP Address Type
None
None
BTS
BTS
None
BSC6900 V900R011
Equipme nt
BSC6900
GBFD117701
Enumeration Type
UNCONDITIONA LSTART(Uncondi tional Start), ATERCONGEST S(Start When Ater Congests), UNCONDITIONALST PREFIXNUMBE ART, R(Start by Prefix ATERCONGESTS, Number) PREFIXNUMBER None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page35of316
150682621.xls.ms_office
Security Level:
BSCNAME
BSC6900
ADD Unique name EXTBSC(Mandat of the GBFDory) external BSC 118621 In-BSC port ADD No. of the BTSMONITORT monitoring S(Mandatory) timeslot
String Type
None
1~64 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
BSCPN
BSC6900
GBFD114701
0~335
None None
None
BTS
None
Not involved
Not involved
None
Radio
BSCPORT
BSC Port
BSC6900
Port number used for the communicatio ADD n between GCBSADDR(Ma the BSC and GBFDndatory) the CBC 113801 Reserved parameter 1 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 10 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 11 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 12 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 13 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 14 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 15 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 16 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 17 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 18 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 19 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 2 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 3 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 4 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 5 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 6 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 7 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 8 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 Reserved parameter 9 SET that is OTHSOFTPARA effective at MRFD(Optional) the BSC level 210301 In-BSC slot ADD No. of the BTSMONITORT monitoring GBFDS(Mandatory) timeslot 114701 In-BSC subrack No. ADD of the BTSMONITORT monitoring GBFDS(Mandatory) timeslot 114701 In-BSC subtimeslot No. of the monitoring timeslot. If the added monitoring timeslot works at 64 kbit/s, the sub-timeslots are numbered from 0. If the added monitoring timeslot works at 32 kbit/s, the sub-timeslots are numbered from 0 or 4. If the added monitoring timeslot works at 16 kbit/s, the sub-timeslots are numbered ADD from 0, 2, 4, BTSMONITORT or 6. If the GBFDS(Mandatory) added 114701 When the BTS clock is adjusted, the offset is added to obtain better network GBFDperformance. 118201
TRX Cooperation
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSCRESER VEDPARA1
Reserved parameter 1
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSCRESER VEDPARA2
Reserved parameter 2
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSCRESER VEDPARA3
Reserved parameter 3
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSCRESER VEDPARA4
Reserved parameter 4
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSCRESER VEDPARA5
Reserved parameter 5
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSCRESER VEDPARA6
Reserved parameter 6
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSCRESER VEDPARA7
Reserved parameter 7
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSCRESER VEDPARA8
Reserved parameter 8
BSC6900
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSCRESER VEDPARA9
Reserved parameter 9
BSC6900
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
BSCSN
BSC6900
0~27
None None
None
BTS
None
Not involved
Not involved
None
Radio
BSCSRN
BSC6900
SemiPermanent Connection
0~11
None None
None
BTS
None
Not involved
Not involved
None
Radio
BSCSUBTS
BSC6900
SemiPermanent Connection
0~7
None None
None
BTS
None
Not involved
Not involved
None
Radio
BSC6900
SoftSynchronized Network
0~2500
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
BSCTID
ID of BSC in TC Pool
BSC6900
BSCTID
BSC6900
ADD ATERE1T1(Man datory) ADD ATERSL(Mandat ory) ADD SEMILINK(Mand BSC ID in the atory) TCof pool. ID the BSC that SET supports the BSCBASIC(Man TC pool datory) function. In-BSC timeslot No. ADD of the BTSMONITORT monitoring S(Mandatory) timeslot
GBFD113726
TC Pool
0~15
None None
None
E1/T1 link
When configure TC data, for example, select TC for "BM/TC config Flag", or MTP2 for "Application Type", the parameter Read & should be set. Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
GBFD113726
TC Pool
1~15
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSCTS
BSC6900
GBFD114701
SemiPermanent Connection
1~31
None None
None
BTS
None
Not involved
Not involved
None
Radio
6/9/2013
Page36of316
150682621.xls.ms_office
Security Level:
BSCVMAX
BS_CV_MAX
BSC6900
This parameter is used to set the parameter BS_CV_MAX for MS countdown. This parameter is used for the MS to calculate the CV. This parameter also determines the duration of the timer T3198. When the MS sends one uplink RLC data block, the receiving state of this data block is set to Pending and the timer T3198 is SET started. If the GCELLPSBASE( MS receives GBFDOptional) the packet 114101
GPRS
0~15
None None
10 Cell
None
Not involved
Not involved
BSC6900
BSPAMFRA MS
BSC6900
BSPBCCHBL Number of PBCCH KS Blocks BSC6900 BSPRACHBL Number of PRACH KS Blocks BSC6900
Whether to enable the BTS to transfer BS/MS power class to the BSC Number of PAGCH blocks Number of multiframes in a cycle on a paging subchannel. In fact, this parameter specifies the number of paging subchannels that a paging channel in a cell is divided into. In an actual network, an MS does not listen to other paging subchannels but its belonging paging subchannel only. Refer to GSM Rec. 05.02 and GSM Rec. 05.08. The larger the value of this SET parameter, GCELLIDLEBAS the more the IC(Optional) number of ADD Number of GCELL(Optional PBCCH ) blocks ADD Number of GCELL(Optional PRACH ) blocks SET GCELLHOCTRL (Optional) ADD GCELL(Optional ) General strategy of the BSS local switching, which includes the BSC local switching and the BTS local switching. The two functions cannot be enabled at SET the same BSSLS(Optional) time. Type of the BSS local switching with the cooperation of the MSC. NONSUPPO RT: When performing local switching, the BSS need not determine whether the MSC allows an MS to be involved in local switching. BASIC: Assignment request messages and handover request messages sent by the MSC contain a flag indicating ADD whether to GCNNODE(Opti allow an MS onal) for local Whether to support the paging function of the CS domain of the A interface. Yes: the MS can be called upon paging request on the A interface when the MS uses the GPRS; No: the MS cannot be called upon paging request on the A interface when the MS uses the GPRS. This parameter is valid only when the paging switch is turned on SET at the A GCELLPSBASE( interface of Optional) the BSS
GBFD110802 MRFD210301
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
Not involved
Not involved
None If "MR.Pre processin g" is set to BTS_Pre processin g and this paramete r is set to NO, the uplinkdownlink balance associate d traffic statistics is improper. In addition, the handover algorithm s that require power compens ation are improper, such as PBGT handover
Radio
0~12
None
4 Cell
None
Not involved
Not involved
Enumeration Type
2_M_PERIOD(2 Multiframe Period), 3_M_PERIOD(3 Multiframe Period), 4_M_PERIOD(4 Multiframe Period), 5_M_PERIOD(5 Multiframe Period), 6_M_PERIOD(6 Multiframe Period), 7_M_PERIOD(7 Multiframe Period), 8_M_PERIOD(8 Multiframe Period), 9_M_PERIOD(9 Multiframe Period)
2_M_PERIOD, 3_M_PERIOD, 4_M_PERIOD, 5_M_PERIOD, 6_M_PERIOD, 7_M_PERIOD, 8_M_PERIOD, 9_M_PERIOD, step: multiframe period ms
None
2_M_PERIOD
Cell
None
Not involved
Not involved
1~4
None
1 Cell
None
Not involved
Not involved
0~12
None
1 Cell
None
Not involved
Not involved
None A paging block (four continuou s CCCH timeslots ) can bear two IMSI paging message s, four TMSI paging message s, or two AGCH immediat e assignme nt message . If the signaling downlink is faulty when an MS is idle, the rule of downlink failure is The parameter modification based on has no impact on the the equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
If this parameter is set to a greater value, the number of paging subchannels in a cell increases and the number of MSs on each paging subchannel decreases. This can prolong the average service life of MS batteries but increase the delay of paging messages and degrade the Versions earlier than system performance. BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
None
Radio
None
Radio
BSC6900
GBFD117701 GBFD117702
Enumeration Type
NEITHERSTART (Neither Start), BTSPRIORITY(B TS Priority), BSCPRIORITY( BSC Priority), BTSONLY(BTS Only), BSCONLY(BSC Only)
None None
NEITHERSTART
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSSLSMSC COOP
GBFD117701 GBFD117702
Enumeration Type
NONSUPPORT( Not Support), BASIC(Basic Fun), ENHANCED(Enh NONSUPPORT, NONSUPPO anced Fun) BASIC, ENHANCED None RT
NONSUPPORT
MSC
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD119305
Enumeration Type
NO(NO), YES(YES) SCUa, GCUa, GCGa, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, EIUa, OIUa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, XPUa, SPUb, XPUb, DPUa, DPUb, DPUc, DPUd, DPUe, TNUa, ALL
NO, YES
None None
YES
Cell
None
Not involved
Not involved
This paramete r is valid on a per cell basis and is valid only when "ACOOP ERATPA GINGSW ITCH" in the "SET BSCPSS OFTPAR A" comman The parameter modification d is set has no impact on the to YES. equipment. None
Radio
BT
Board type
BSC6900
MRFD210401
Enumeration Type
SCUa, GCUa, GCGa, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, EIUa, OIUa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, XPUa, SPUb, XPUb, DPUa, DPUb, DPUc, DPUd, DPUe, TNUa, ALL None None
None
None
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page37of316
150682621.xls.ms_office
Security Level:
BT
Board type
BSC6900
MRFD210401
Enumeration Type
SCUa, GCUa, GCGa, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, EIUa, OIUa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, XPUa, SPUb, XPUb, DPUa, DPUb, DPUc, DPUd, DPUe, TNUa AEUa, PEUa, AOUa, POUa, UOIa, EIUa, OIUa, AOUc, POUc, UOIc AEUa, AOUa, PEUa, POUa, AOUc, POUc, EIUa, OIUa AEUa, AOUa, PEUa, POUa, AOUc, POUc, EIUa AEUa, AOUa, AOUc, PEUa, POUa, POUc, EIUa, OIUa
SCUa, GCUa, GCGa, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, EIUa, OIUa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, XPUa, SPUb, XPUb, DPUa, DPUb, DPUc, DPUd, DPUe, TNUa None None AEUa, PEUa, AOUa, POUa, UOIa, EIUa, OIUa, AOUc, POUc, UOIc None None
None
None
None
Not involved
Not involved
None
Equipme nt
BT
Board type
BSC6900
MRFD210502
BSC/RNC Clock
Enumeration Type
None
None
None
Not involved
Not involved
None
Equipme nt
BT
Board type
BSC6900
Board type
None
None
Enumeration Type
AEUa, AOUa, PEUa, POUa, AOUc, POUc, EIUa, OIUa None None AEUa, AOUa, PEUa, POUa, AOUc, POUc, EIUa None None
None
E1/T1 port
None
Not involved
Not involved
Not involved
None
Transpor t
BT
Board type
BSC6900
None
None
Enumeration Type
None
Cell
None
Cell
None
Transpor t
BT
Board type
BSC6900
None
None
Enumeration Type
AEUa, AOUa, AOUc, PEUa, POUa, POUc, EIUa, OIUa None None
None
E1/T1 port
None
Not involved
Not involved
Not involved
BT
Board type
BSC6900
None
None
Enumeration Type
AEUa, AOUa, AOUc, PEUa, POUa, POUc, EIUa, OIUa AOUa, POUa, UOIa, AOUc, UOIc, POUc, OIUa
AEUa, AOUa, AOUc, PEUa, POUa, POUc, EIUaA/EIUaB/EIUaP /EIUaT, OIUaA/OIUaB/OIUa P/OIUaT None None
None
E1/T1 port
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None If certain link is occupied, conversio n from E1 to T1 or from T1 to E1 cannot be The parameter modification performe has no impact on the d. equipment. None The paramete r cannot be modified. Not involved
Transpor t
Transpor t
BT
Board type
BSC6900
None
None
Enumeration Type
None
Board
None
Not involved
Not involved
Not involved
None
Transpor t
BT
Board Type
BSC6900
BT
Board type
BSC6900
SET COPTLNK(Mand atory) Board type ADD IPLOGICPORT( Mandatory) Board type
None
None
None
None
AOUa, POUa, AOUc, POUc, OIUa FG2a, GOUa, UOIa, FG2c, GOUc, POUc
None None
None
None
Not involved
Not involved
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None The paramete r cannot be modified. Not involved
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
BT
Board type
BSC6900
BT
Board Type.
BSC6900
CHK E1T1CRS(Mand atory) Board type None Type of the board that controls the RET antenna. 1. DATU: It may represent the DATU or the DATM and is applicable to the BTS3012, BTS3012AE, BTS3012_II, BTS3006C, and BTS3002E. 2. GATM: It is applicable to the BTS3900 GSM, BTS3900A GSM, ADD BTS3036, BTSRETANT(Ma and MRFDndatory) BTS3036A. 210602
None
Enumeration Type
EIUa
EIUa
None None
None
E1/T1 port
None
Not involved
Not involved
Not involved
None
Transpor t
Enumeration Type
DATU(DATU), GATM(GATM), DRRU(DRRU), MRRU(MRRU), MRFU(MRFU), GRFU(GRFU), GRRU(GRRU) CDU(CDU), PCDU(PCDU), DCDU(DCDU), CDUC(CDUC), CDUP(CDUP), RCDU(RCDU), CDUR(CDUR), CDUE(CDUE), EDU(EDU), PEDU(PEDU), REDU(REDU), DEDU(DEDU), EDUC(EDUC), EDUP(EDUP), EDUR(EDUR), EDUE(EDUE), DDPM_DDPU(D DPM_DDPU), DFCU(DFCU), DFCB(DFCB) PWC(PWC), EAC_EMUA(EA C_EMUA), DTMU(DTMU), DATM_DATU(DA TM_DATU), NFCB(NFCB), EMU_DEMU(EM U_DEMU), DPMU(DPMU), DCBM_DCOM(D CBM_DCOM), DHEU(DHEU), ECOM(ECOM), MFU(MFU), MPW(MPW), MCD(MCD), IASU(IASU), PTU(PTU), TMU(TMU), PSU_APSU(PSU _APSU), PMU_APMU(PM U_APMU), 3001C_MFU(300 1C_MFU), TEU(TEU), TES(TES), PBU(PBU), DPBU(DPBU), RPBU(RPBU), PPBU(PPBU), SCU(SCU), MDU(MDU), DRRU(DRRU), DRFU(DRFU), MRRU(MRRU), XRRU(XRRU), MRFU(MRFU), GRFU(GRFU), GRRU(GRRU), XRFU(XRFU), BTS3900E(BTS3 900E) TRX(TRX_DEFA ULT), TRX_GPRS(TRX _GPRS), DRU(TRX_30), PTRX(PTRX), ETRX(ETRX), RTRX(RTRX), DTRX(DTRX), RETR(RETR), DETR(DETR), EETR(EETR), PETR(PETR), MTR(MTR), TRU(TRU/DTRU) , QTRU(QTRU) CDU(CDU), CDUC(CDUC), CDUP(CDUP), CDUR(CDUR), CDUE(CDUE), PCDU(PCDU), RCDU(RCDU), DCDU(DCDU), EDU(EDU), EDUC(EDUC), EDUP(EDUP), EDUR(EDUR), EDUE(EDUE), PEDU(PEDU), REDU(REDU), DEDU(DEDU), DDPM_DDPU(D DPM_DDPU), DFCU(DFCU), DFCB(DFCB)
None None
None
BTS
None
Not involved
Not involved
Not involved
Not involved
Equipme nt
BT
Board Type
BSC6900
ADD Type of the BTSANTFEEDE newly added RBRD(Mandator antenna GBFDy) board 111202
O&M of BTS
Enumeration Type
CDU, PCDU, DCDU, CDUC, CDUP, RCDU, CDUR, CDUE, EDU, PEDU, REDU, DEDU, EDUC, EDUP, EDUR, EDUE, DDPM_DDPU, DFCU, DFCB None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BT
Board Type
BSC6900
O&M of BTS
Enumeration Type
BIE, PWC, EAC, EMUA, MCK, DTMU, DATM_DATU, NFCB, EMU_DEMU, DPMU, DCBM_DCOM, DHEU, ECOM, MFU, MPW, MCD, IASU, PTU, TMU, PSU, PMU, APMU, 3001C_MFU, TEU, TES, PBU, DPBU, RPBU, PPBU, SCU, MDU, UPEU, UEIU, FMU, FMUA, DTCU, GATM, DGPS, USCU, UBRI, FAN, EMU, PMU, TCU, PSU None None
None
BTS
The value range of this parameter varies with BTS type. Different types of BTSs support different type of boards.
Not involved
Not involved
None
Equipme nt
BT
Board Type
BSC6900
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BT
Board Type
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
TRX_30_OR_DRU, TRX_GPRS, PTRX, ETRX, RTRX, DTRX, RETR, DETR, EETR, PETR, MTR, TRU, QTRU
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BT
Board Type
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
CDU, CDUC, CDUP, CDUR, CDUE, PCDU, RCDU, DCDU, EDU, EDUC, EDUP, EDUR, EDUE, PEDU, REDU, DEDU, DDPM_DDPU, DFCU, DFCB None None
None
BTS
None
Not involved
Not involved
Not involved
Not involved
Equipme nt
BTCFLAG
BSC6900
The configuration flag specifies ADD the operation ATERE1T1(Man is on the BM GBFDdatory) or TC. 111801
CFGBM(BM), CFGTC(TC)
CFGBM, CFGTC
None None
None
E1/T1 link
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page38of316
150682621.xls.ms_office
Security Level:
BTCFLAG
BSC6900
CFGBM indicates that the BM signaling link is from BSC in the configuration. CFGGTC indicates that the TC signaling link ADD is from BSC ATERSL(Mandat in the GBFDory) configuration. 111801 Working voltage used by the power amplifier. The BSC supports that the power amplifier uses different working voltages in SET different TRX GCELLBASICPA modulation GBFDRA(Optional) modes. 111202
CFGBM(BM), CFGTC(TC)
CFGBM, CFGTC
None None
None
ATER CONS L
None
Not involved
Not involved
Not involved
None
Transpor t
BTSadjust
Adjust Voltage
BSC6900
O&M of BTS
Enumeration Type
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Equipme nt
BTSCOMTY PE
BSC6900
Communicati SET on type of a GBFDBTSIP(Optional) BTS 118601 Peer equipment type of the BTS. This parameter indicates whether to connect the BTS to the BSC or cascade the BTS to another BTS. BTS detection switch. If the parameter is set to "CLOSE", the function of detecting the BTS is disabled. If the parameter is set to "OPEN", the function of detecting the BTS is enabled. When the function of detecting the BTS is enabled, the BSC performs addressing according to the BTS IP address and sends the UDP packet carrying the VLANID to the BTS.
Abis over IP
Enumeration Type
None None
None
BTS
None
BTS
None
Transpor t
BTSDESC
BTS Description
BSC6900
ADD BTS(Optional)
GBFD111202
O&M of BTS
String Type
None
0~64 characters
None None
None
BTS
None
Not involved
Not involved
This paramete r cannot The parameter modification contain has no impact on the #. equipment. None
Equipme nt
GBFD118601
Abis over IP
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Transpor t
BTSID
Site Index
BSC6900
BTSID
BTS Index
BSC6900
BTS index of the adjacent node to be added. The parameter is valid when ADD Adjacent ADJNODE(Mand node type is atory) set to Abis. None SET BTSEXCURSIO N(Mandatory) SET BSCSYNCOFF( Mandatory) SET BTSAISS(Manda tory) ADD BTSESN(Mandat ory) SET GMRSCOPE(Ma ndatory) SWP BTSRING(Mand atory) ADD CELLBIND2BTS( Mandatory) SET BTSAIRCON(Ma ndatory) SET BTSALM(Manda tory) SET ID of the BTSAUXEQP(M BTS. The andatory) BTS ID must SET not conflict BTSBAKPWR(M with other andatory) BTS IDs in GBFDSET the BSC. 111202
None
0~2047
None None
None
Not involved
Not involved
None
Transpor t
O&M of BTS
0~2047
None None
None
BTS
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Equipme nt
BTSID
BTS Index
BSC6900
SET Index of the BTSABISPRIMA BTS running GBFDP(Mandatory) the command 111202 Number of the BTS connected to the BSC. The ADD number is BTSABISHDLCP unique in a GBFDATH(Mandatory) BSC 118401 LOD BTSSW(Mandat ory) LOD BTSPATCH(Man datory) CON BTSPATCH(Man datory)
O&M of BTS
0~2047
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
0~2047
None None
None
BTS
None
Not involved
Not involved
Not involved
Not involved
BSC6900 V900R011
Radio
BTSIDLST
BSC6900
List of BTS indexes. You can specify multiple GBFDBTSs by to &. 111202 Whether
O&M of BTS
0~2047
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BTSIDTYPE
BSC6900
collect offset information COL by BTS index SYNCINFO(Man or BTS GBFDdatory) name. Index type of 118201 the BTS. BYNAME: query by BTS name; SET BYID: query BTSANTANGLE( by BTS Mandatory) index.
SoftSynchronized Network
Enumeration Type
BYIDX, BYNAME
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
BTSIDTYPE
BSC6900
MRFD210602
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BTSIDX
BSC6900
BTSIP
BTS IP
BSC6900
Base station index, 65535 ADD indicate all BTSOP(Mandato base MRFDry) stations. 210305 IP address of a BTS. When "BTS Com Type" is set to "LOGICIP", the value of the parameter is the IP address of the BTS. When "BTS Com Type" is set to "PORTIP", the value of the parameter is the IP address of the BTS ethernet port. When "BTS Com Type" is set to "PPPLNK" or "MPGRP", the value of ADD the BTSAUTOPLAN( parameter is Mandatory) the local IP SET address of GBFDBTSIP(Optional) the BTS PPP 118601
Security Management
{0~2047}, {65535}
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
Abis over IP
IP Address Type
None
None
BTS
None
BTS
None
Radio
6/9/2013
Page39of316
150682621.xls.ms_office
Security Level:
BtsLsStartM ode
BSC6900
BTSMASK
Subnet mask
BSC6900
Conditions for enabling the function of BTS local switching. UNCONDITI ONALSTART : The function of BTS local switching is enabled without restriction. ABISCONGE STS: The function of BTS local switching is enabled when the congestion rate of the Abis interface exceeds the value of "Abis Cong Thres for BTS LocalSwitch". PREFIXNUM BER: The function of SET BTS local GBFDBSSLS(Optional) switching is 117702 ADD BTSAUTOPLAN( Mask of the GBFDMandatory) subnet 118601
UNCONDITIONA LSTART(Uncondi tional Start), ABISCONGEST S(Start When Abis Congests), PREFIXNUMBE R(Start by Prefix Number)
UNCONDITIONALST ART, ABISCONGESTS, PREFIXNUMBER None None 0.0.0.0~255.255.255 .255 None None
UNCONDITIONALST ART
The value of BtsLsStartMode should be set when "BssLsGenMode" is set to BTSPRIORITY, BSC69 BSCPRIORITY, or 00 BTSONLY.
Not involved
Not involved
None
Abis over IP
None
None
BTS
None
Not involved
Not involved
BTSMESRP TPREPROC
MR.Preprocessing BSC6900
BTSNAME
BTS Name
BSC6900
BTSNAMEC ONBSC
Whether to enable the BTS to preprocess measurement reports. This parameter determines where to SET conduct GCELLHOCTRL power GBFD(Optional) control. 110802 SET BTSEXCURSIO N(Mandatory) SET BSCSYNCOFF( Mandatory) SET BTSAISS(Manda tory) SET BTSABISPRIMA P(Mandatory) ADD BTSESN(Mandat ory) SWP BTSRING(Mand atory) ADD CELLBIND2BTS( Mandatory) SET BTSAIRCON(Ma ndatory) SET BTSALM(Manda tory) Name of the SET BTS. The BTSAUXEQP(M BTS name andatory) must not SET conflict with BTSBAKPWR(M other BTS andatory) names in the GBFDSET BSC. 111202 Connect BSC BTS Name.It is unique in one BSC.This parameter cannot ADD contain ? | : BTSABISHDLCP < > " @ # ! GBFDATH(Mandatory) % ^ & * . [ ] / 118401 LOD BTSSW(Mandat ory) LOD BTSPATCH(Man datory) CON BTSPATCH(Man datory)
BSC_Preprocess ing(BSC preprocessing), BTS_Preprocess ing(BTS BSC_Preprocessing, preprocessing) BTS_Preprocessing None None
None
Cell
If the value of this parameter is BSC_Preprocessing, the pre-processing is performed on the BSC. In this case, the following parameters are invalid: "PRIMMESPPT", "BSMSPWRLEV", and Read & "MRPREPROCFREQ". Write
Not involved
Not involved
None This paramete r can be set to BTS_Pre processin g only when the BTS supports the configure d power control The parameter modification algorithm has no impact on the . equipment.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt Equipme nt
BSC6900 V900R011
If this parameter is set to BTS_Preprocessing, signaling on the Abis interface and BSC load are decreased, thus enhancing the response speed and Versions earlier than the network performance. BSC6900 V900R011
Radio
O&M of BTS
String Type
None
1~64 characters
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
String Type
None
1~64 characters
None None
None
BTS
None
Not involved
Not involved
Not involved
Not involved
BSC6900 V900R011
Radio
BSC6900
GBFD111202
O&M of BTS
String Type
None
1~2048 characters
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
BSC6900
If the parameter is set to "ON", allow all the Ping packets are sent. If the parameter is set to "OFF", SET all the Ping BTSPINGSW(O packets are ptional) discarded. Whether to shut down the TRX that carries the main BCCH to save power when the BTS switches from the mains to batteries. If this parameter is set to NO, when the BTS switches from the mains to batteries, only the TRXs that can be shut down are shut down, except the TRX that carries the main BCCH. If this SET parameter is BTSLOCKBCCH set to YES, (Mandatory) when the Maximum degree by which the BSC can control the SET power of the GCELLPWR2(O BTS ptional) dynamically
GBFD118601
Abis over IP
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
None
BTS
None
Not involved
Not involved
This paramete r is required only by BTSs in IP transmiss The parameter modification ion has no impact on the mode. equipment. None
Radio
GBFD111605
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD110703
1~16, step:2
dB
None
16 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, the range of BTS dynamic power The parameter modification adjustment is decreased, and thus has no impact on the network interference is difficult to be Versions earlier than equipment. reduced. BSC6900 V900R011
Radio
BSC6900
BTSSWVER
BSC6900
BTSTRCMP RATE
BSC6900
Whether the BTS allows sending "Power Control threshold Adjust for SAIC" in Huawei III SET "SET GCELLSOFT(O GCELLPWR ptional) 3" Software LOD version BTSSW(Mandat number of ory) the BTS Transmission compression ratio of a BTS. 1. Modifying the settings of "Transfers Compress Rate" may change the bandwidth required by the BTS. That is, the current bandwidth may be excessive or insufficient. If the bandwidth is insufficient, more secondary links should be added or timeslots should be rearranged. 2. The greater the SET "Transfers BTSTRCMPR(M Compress andatory) Rate" is, the
GBFD118103
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
None
Cell
None
Not involved
Not involved
For a doubletransceiv er BTS or an NGBTS, the initial value is ON. For a BTS of any other type, the initial value is OFF and The parameter modification unconfigu has no impact on the rable. equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
GBFD111202
O&M of BTS
String Type
None
1~256 characters
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GBFD118401
1~250
None None
None
BTS
This parameter is used to caculate BindWidth of BTSAbisHDLCPath: 1. When Transmission compression ratio is within range of [1, 200], BindWidth=16K*(amount of TRXs) + 64K*(amount of TRXs)*(Transmission compression ratio)/100; 2. When Transmission compression ratio is within range of [200, 250], BindWidth=16K*(amount of TRXs) + 64K*(amount of TRXs)*(200 + (Transmission compression ratio Read & 200)*12)/100. Write
Not involved
Not involved
None
Transpor t
6/9/2013
Page40of316
150682621.xls.ms_office
Security Level:
BTSTYPE
BTS Type
BSC6900
SET BTSALM(Manda tory) ADD Type of the BTS(Mandatory) BTS ADD BTSAUTOPLAN( Mandatory) SET BTSAUTOPLAN Type of the CFG(Mandatory) BTS
GBFD111202
O&M of BTS
Enumeration Type
BTS30, BTS312, BTS3001C, BTS3001CP, BTS3002C, BTS3012A, BTS3006A, BTS3012, BTS3006C, BTS3002E, BTS3012AE, BTS3012_II, DBS3900_GSM, BTS3900_GSM, BTS3900A_GSM , DBS3036, BTS3036, BTS3036A, BTS3900B_GSM , BTS3900E_GSM , BTS3900L_GSM
BTS30, BTS312, BTS3001C, BTS3001CP, BTS3002C, BTS3012A, BTS3006A, BTS3012, BTS3006C, BTS3002E, BTS3012AE, BTS3012_II, DBS3900_GSM, BTS3900_GSM, BTS3900A_GSM, DBS3036, BTS3036, BTS3036A, BTS3900B_GSM, BTS3900E_GSM, BTS3900L_GSM None None
None
BTS
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Equipme nt
BTSTYPE
BTS Type
BSC6900
GBFD510701
Enumeration Type
BTS3900B_GSM (BTS3900B GSM), BTS3900E_GSM (BTS3900E BTS3900B_GSM, GSM) BTS3900E_GSM BTS3012(BTS30 12), BTS3006C(BTS3 006C), BTS3002E(BTS3 002E), BTS3012AE(BTS 3012AE), BTS3012_II(BTS 3012_II), DBS3900_GSM( DBS3900 GSM), BTS3900_GSM( BTS3900 GSM), BTS3900A_GSM (BTS3900A GSM), DBS3036(DBS30 36), BTS3036(BTS30 36), BTS3036A(BTS3 036A), BTS3900L_GSM (BTS3900L GSM), BTS3900B_GSM (BTS3900B GSM), BTS3900E_GSM (BTS3900E GSM)
None None
None
BTS
None
Not involved
Not involved
Not involved
Not involved
BSC6900 V900R011
Equipme nt
BTSTYPE
BTS Type
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
BTS3012, BTS3006C, BTS3002E, BTS3012AE, BTS3012_II, DBS3900_GSM, BTS3900_GSM, BTS3900A_GSM, DBS3036, BTS3036, BTS3036A, BTS3900L_GSM, BTS3900B_GSM, BTS3900E_GSM None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BTSWTR
Time for which the BTS waits to restore a GBFDBFD session 118609
Interval Type 0~1000000 BIULOOP(BIU Loopback Test), TRXSELFTEST( TRX Self Loopback Test)
0~1000000
Not involved
Not involved
None
Transpor t
BSC6900
STR BTSTST(Mandat Type of TRX GBFDory) loopback test 111207 Battery type. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSAPMUBP(O in another ptional) mode. If the OML is not established at one port after a period of time, the OML switches to another port and tries to connect to this port. That period of time is SET called ring II BTSRINGATTR( rotating Optional) duration time. Whether to ADD enable the SCTPLNK(Optio data binding nal) function. ADD PTPBVC(Mandat ory) BLK PTPBVC(Mandat ory) ADD GCELLQUICKS ETUP(Optional)
Enumeration Type
BIULOOP, TRXSELFTEST
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BTYPE
Battery Type
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
NO_BAT(No Storage Battery), LEADACID_BAT (Lead Acid Battery), NO_BAT, LITHIUM_BAT(Li LEADACID_BAT, thium Battery) LITHIUM_BAT
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BUILDTIME
BSC6900
GBFD117802
10~255
None
None
BTS
The setting of this parameter must meet the following condition: "FallBack Start Time" > "Ring II Wait Time Before Switch" + "Ring II Try Rotating Duration Read & Time". Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
BSC6900
None
None
Enumeration Type
NO(NO), YES(YES)
YES, NO
None NO
NO
None
None
Not involved
Not involved
None
Transpor t
BVCI
GBFD119001 GBFD119001
2~65534
None None
None
Cell
None
Not involved
Not involved
Not involved
BVCI
PTPBVC identifier
BSC6900
2~65534
None None
None
Cell
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None
Radio Equipme nt
BSC6900 V900R011
BVCTF
BSC6900
BWADJ
BSC6900
Duration of BVC flow control timer F. A cell sends the flow control message at SET the interval BSSGPPARA(O specified by GBFDptional) this timer. 119001 Switch for adjusting the dynamical bandwidth of the logical port If this switch is turned on, the system adjusts the dynamical bandwidth of the logical port according to the transmission quality of the link monitored by the IPPM. After this switch is turned on, the IPPM function must be activated on the IPPATH of this logical port. For ADD details about IPLOGICPORT( the IPPM, Mandatory) see the None Backward ADD congestion TRMLOADTH(O remain ptional) bandwidth Backward ADD congestion TRMLOADTH(O clear ptional) bandwidth Backward ADD congestion TRMLOADTH(O clear remain ptional) ratio
Gb Interface Function
1000~3000
ms
None
1000 BSC
None
Not involved
Not involved
None
Equipme nt
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
IP logical port
The dynamic bandwidth switch is turned only when the IPPM function is activated through "ACT Read & IPPM". Write
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
BSC6900
None
None
0~200000
kbit/s
0 None
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
None
None
0~200000
kbit/s
0 None
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
None
None
0~100
per cent
20
20 None
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
ADD Backward TRMLOADTH(O congestion ptional) remain ratio Backward overload ADD congestion TRMLOADTH(O clear remain ptional) bandwidth Backward overload ADD congestion TRMLOADTH(O clear remain ptional) ratio Backward overload ADD congestion TRMLOADTH(O reserved ptional) bandwidth Backward ADD overload TRMLOADTH(O congestion ptional) remain ratio Backward ADD handover TRMLOADTH(O reserved ptional) ratio Backward ADD handover TRMLOADTH(O reserved ptional) bandwidth
None
None
0~100
per cent
15
15 None
None
Not involved
Not involved
Not involved
None
Transpor t
None
None
0~200000
kbit/s
0 None
None
Not involved
Not involved
Not involved
None
Transpor t
Backward overload BWDOVLDC congestion clear LRTH remain ratio BSC6900 Backward overload congestion BWDOVLDR reserved SVBW bandwidth BSC6900
None
None
0~100
per cent
1 None
None
Not involved
Not involved
Not involved
None
Transpor t
None
None
0~200000
kbit/s
0 None
None
Not involved
Not involved
Not involved
None
Transpor t
None
None
0~100
per cent
0 None
None
Not involved
Not involved
Not involved
None
Transpor t
None
None
0~100
per cent
5 None
None
Not involved
Not involved
Not involved
None
Transpor t
None
None
0~200000
kbit/s
0 None
None
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page41of316
150682621.xls.ms_office
Security Level:
BSC6900
None
None
100~1000
per cent
120
None
Not involved
Not involved
None
Transpor t
BWMODE
Bandwidth Mode
BSC6900
Bandwidth mode. It is valid only when " Transport ADD Resource RSCGRP(Manda Group Type " tory) is set to IP. None Threshold of bandwidth change based on the load control algorithm When the system detects that the change of the available bandwidth exceeds this threshold through the IPPM, the system starts adjusting the ADD bandwidth of IPLOGICPORT( the logical Optional) port. None Threshold for reporting the uplinkdownlink imbalance alarm. If the percentage of the uplinkdownlink imbalance measurement reports in the total valid measurement reports is equal to or greater than this threshold, the uplinkdownlink GBFDSET imbalance 110801 GTRXRLALM(O alarm is GBFDptional) reported. 110802 ADD NCELL(Mandato ry) COL SYNCINFO(Man datory) Index type. The value can be BYIDX or BYNAME.
None
Enumeration Type
FULL_DUPLEX, HALF_DUPLEX
None None
None
Trans mission resour When "GRPT" in "ADD ce RSCGRP" is set to IP, group this parameter is valid.
Not involved
Not involved
None
Transpor t
BWRTPTH
BSC6900
None
0~100
per cent
25
IP logical 25 port
None
Not involved
Not involved
None
Transpor t
BWTHD
BSC6900
20~100
per cent
None
80 TRX
This parameter is valid only when "WLNKALMFLAG" is set Read & to YES. Write
Not involved
Not involved
None
Equipme nt
BSC6900
MRFD210301
Configuration Management
Enumeration Type
BYIDX(By Cell Index), BYNAME(By Cell Name) BYIDX, BYNAME c31notuse(Not Use c31 standard), c31standard(Use c31notuse, c31 standard) c31standard
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
C31HYST
Whether the reselection SET hysteresis GCELLRESELE parameter is CTPARA(Option applied to the GBFDal) C31 criterion. 114101 Whether GPRS cell reselection offset is used for C32 calculation during cell reselection. If this parameter is set to 1, then only the positive hysteresis of the SET neighoring GCELLRESELE cell is used in CTPARA(Option C32 al) calculation. Descriptive ADD information of BTSCABINET(O the BTS ptional) cabinet List of all the SET cabinet BTSRACKBC(M numbers in andatory) the BTS Whether the added cabinet is a ADD remote CAB(Mandatory) cabinet
GPRS
Enumeration Type
None None
c31standard
Cell
None
Not involved
Not involved
None
Radio
C32QUAL
GBFD114101
GPRS
0~1
None None
0 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
BSC6900
GBFD111202
O&M of BTS
String Type
None
1~200 characters
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
CABLST
Cabinet List
BSC6900
GBFD111202
O&M of BTS
0~8
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
CABT
Is remote cabinet
BSC6900
MRFD210301
Configuration Management
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
None
None
Not involved
Not involved
Not involved
None
Equipme nt
BSC6900
CALVAL
Calibration Value
BSC6900
Whether to allow call reestablishm ent. If a call drop results from radio link failure caused by blind spots due to burst interferences or high buildings, an MS can start the process of call reestablishm SET ent to GCELLBASICPA resume the GBFDRA(Optional) conversation. 110503 SET Calibration BTSCLKPARA( value of the GBFDMandatory) clock 111202 Whether an MS uses the calculated value as the final receive level value. The calculated receive level value is the measured receive level value minus the receive level value obtained from the BCCH TRX timeslots. This parameter is a cell option SET in system GCELLCCCH(O messages 3 GBFDptional) and 6. 113701 Whether to enable the capacity and coverage of the BTS to be automatically optimized according to the actual situation of SET the BTSAUTOPLAN incumbent GBFDCFG(Optional) network. 510702 Whether to indicate that the IP path is carried on the IP logic ADD port or IPPATH(Optional resource ) group None
NO(No), YES(Yes)
NO, YES
None None
If this parameter is set to NO, the average call drop rate decreases. In suburbs or urban areas of poor coverage, the recommended value is NO. However, call reestablishment may take a long time; therefore, the subscriber may hang up the phone before the call is reestablished. Generally, the recommended value is YES. Cell
None
Not involved
Not involved
None
O&M of BTS
0~4095
None None
None
None
None
Not involved
Not involved
None
The parameter modification Call reestablishment can decrease the has no impact on the call drop rate but waste channel equipment. resources. The parameter modification has no impact on the equipment. None
Radio Equipme nt
BSC6900 V900R011
CANPC
PWRC
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
CARRYFLA G
Carry Flag
BSC6900
None
Enumeration Type
NULL(NULL), IPLGCPORT(IP Logic Port), RSCGRP(Resou NULL, IPLGCPORT, rce Group) RSCGRP None NULL ETHER, IPLOGICPORT, TRUNK, PPP, MP
NULL
IP path None
IP path
None
Transpor t
CARRYT
BSC6900
ADD Bearer type IPLOGICPORT( of the logical Optional) port None Port type of the STR SBFD/ARP IPCHK(Optional) bearer
None
Enumeration Type
None None
None
IP logical port
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
CARRYT
BSC6900
GBFD118609
Enumeration Type
ETHPORT, TRUNK
ETHPORT, TRUNK
None None
None
None
None
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page42of316
150682621.xls.ms_office
Security Level:
CAS0
CAS1
BSC6900
CAS2
BSC6900
CAS3
BSC6900
Whether the common Boolean alarms 1 to 8 reserved by the system are enabled. These common Boolean alarms can be customized according to the actual input Boolean value defined by field engineers. These Boolean alarms are enabled by default. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter Whether the common Boolean alarms 9 to 16 reserved by the system are enabled. These common Boolean alarms can be customized according to the actual input Boolean value defined by the field engineers. These Boolean alarms are enabled by default. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin Whether the common Boolean alarms 17 to 24 reserved by the system are enabled. These common Boolean alarms can be customized according to the actual input Boolean value defined by the field engineers. These Boolean alarms are enabled by default. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin Whether the common Boolean alarms 25 to 32 reserved by the system are enabled. These common Boolean alarms can be customized according to the actual input Boolean value defined by the field engineers. These Boolean alarms are enabled by default. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin
MRFD210304
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
CASV0
BSC6900
Voltage level of common Boolean alarms 1 to 8. The alarms are classified into high level alarms and low level alarms according to the voltage level. All these alarms are low level alarms by default. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDEMUBP(O in another MRFDptional) mode. 210304 Voltage level of common Boolean alarms 9 to 16. The alarms are classified into high level alarms and low level alarms according to the voltage level. All these alarms are low level alarms by default. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDEMUBP(O in another MRFDptional) mode. 210304
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
CASV1
BSC6900
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page43of316
150682621.xls.ms_office
Security Level:
CASV2
BSC6900
Voltage level of common Boolean alarms 17 to 24. The alarms are classified into high level alarms and low level alarms according to the voltage level. All these alarms are low level alarms by default. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDEMUBP(O in another MRFDptional) mode. 210304 Voltage level of common Boolean alarms 25 to 32. The alarms are classified into high level alarms and low level alarms according to the voltage level. All these alarms are low level alarms by default. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDEMUBP(O in another MRFDptional) mode. 210304 Used together with "Cell bar qualify" to decide the priority status of a cell. Refer to GSM Rec. 04.08. Cell bar qualify Cell bar access Cell selection priority Cell reselection priority NO NO Normal Normal NO YES Prohibited Prohibited YES NO Low Normal YES GBFDSET YES 110401 GCELLIDLEBAS Low GBFDIC(Optional) Normal 110402 Uniquely identifying a ADD cell GCBSADDR(Ma broadcast GBFDndatory) center (CBC) 113601 ADD GCBSADDR(Ma IP address of ndatory) a CBC CBC interface parameter. The value of this parameter must be translated into a binary numeral. The following describe each bit of the value: Bit 0: phase flag Bit 1: message type flag Bit 2: cell list flag Bit 3: whether to carry a recovery indication Bit 4: whether to carry a cell ID Bit 5: ADD whether to GCBSADDR(Opt carry a ional) recovery
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
CASV3
BSC6900
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
CBA
BSC6900
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
The CBA function applies to special scenarios. If this parameter is set to YES and "Cell bar qualify" is set to no, only handovers are allowed in a cell, and direct access of an MS is not allowed. This condition applies to a dual-network coverage cell. For a common cell, this parameter should be set to NO.
Cell
None
Not involved
Not involved
If the value of "Cell bar access" is YES and the value of "Cell bar qualify" is NO, new call access is prohibite d but handover The parameter modification access is has no impact on the allowed. equipment. None The paramete r cannot be modified. Not involved
Radio
CBCINDEX
CBC INDEX
BSC6900
CBCIP
CBC IP
BSC6900
GBFD113601
Short Message Service Cell Broadcast (TS23) Interval Type 0~3 Short Message Service Cell Broadcast IP Address (TS23) Type None
0~3
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Radio
None
BSC69 00 None
Not involved
Not involved
None
Radio
BSC6900
GBFD113601
0~63
None
30
BSC69 30 00 None
Not involved
Not involved
None
Radio
CBCPORT
CBC Port
BSC6900
Port number at the CBC side in the ADD communicatio GCBSADDR(Ma n with the GBFDndatory) BSC 113601 Duration of no cell broadcast message at the Cb interface. If the BSC does not receive any message from the CBC during the preset value of this parameter, the BSC considers that the connection with the CBC has been SET broken and BSCTMR(Option reestablishes al) a connection. Used together with "Cell bar access" to decide the priority status of a cell. See GSM Rec. 0408. This parameter does not affect cell reselection but cell selection only. Cell bar qualify Cell bar access Cell selection priority Cell reselection priority NO NO Normal Normal NO YES Prohibited Prohibited SET YES GCELLIDLEBAS NO IC(Optional) Low ADD Maximum IPLOGICPORT( burst size Optional) (MBS)
0~65535
None None
Not involved
Not involved
None
Radio
BSC6900
GBFD113601
5~180
None
BSC69 15 00 None
Not involved
Not involved
None
Radio
CBQ
BSC6900
GBFD110401
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
CBS
None
None
4500~32767
byte
4500
None
Not involved
Not involved
None
Not involved
Not involved
If the value of "Cell bar access" is YES and the value of "Cell bar qualify" is NO, new call access is prohibite d but handover The parameter modification access is has no impact on the allowed. equipment. None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Transpor t
6/9/2013
Page44of316
150682621.xls.ms_office
Security Level:
CBSCTHD
BSC6900
CPU usage threshold for Cell Broadcast Service (CBS) flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, CBS flow control is triggered. This parameter is valid only SET when "Board FCCPUTHD(Opti Class" is WRFDonal) "XPU". 040100 Packet queue usage threshold for CBS flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, CBS flow control is triggered. This parameter is valid only SET when "Board FCMSGQTHD(O Class" is WRFDptional) "XPU". 040100 Timer interval for sending handshake messages. According to the value of this parameter, the BSC regularly sends the CBC a handshake message to decide whether the communicatio n between SET the BSC and BSCTMR(Option the CBC is GBFDal) normal. 113601 Number of enhanced measurement reports (EMRs) sampled for averaging the CV_BEP on the SDCCH. Averaging the CV_BEP in multiple EMRs helps to prevent the SET incomprehen GCELLHOFITPE siveness of a GBFDN(Optional) single EMR. 117501 CPU usage threshold for recovery from CBS flow control. When the average CPU usage of sliding windows is lower than the threshold, CBS flow control is stopped. This parameter is valid only SET when "Board FCCPUTHD(Opti Class" is WRFDonal) "XPU". 040100 Packet queue usage threshold for recovery from CBS flow control. When the average packet queue usage of sliding windows is lower than the threshold, CBS flow control is stopped. This parameter is valid only when "Board Class" is XPU. Whether to control CBS flow Number of enhanced measurement reports (EMRs) sampled for averaging the CV_BEP on the TCH. Averaging the CV_BEP in multiple EMRs helps to prevent the incomprehen siveness of a single EMR. Country code, for example, 86 for China
Flow Control
30~100
per cent
None
85 Board
None
Not involved
Not involved
None
Equipme nt
CBSCTHD
BSC6900
Flow Control
30~100
per cent
None
80 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
1~5
None
BSC69 3 00 None
Not involved
Not involved
None
Radio
BSC6900
ms
None
2 Cell
This parameter is valid only when "MEASURETYPE" in "SET GCELLCCUTRANSYS" is set to EnhMeasReport.
Not involved
Not involved
None
Radio
CBSRTHD
BSC6900
Flow Control
30~100
per cent
None
75 Board
None
Not involved
Not involved
None
Equipme nt
CBSRTHD
BSC6900
WRFD040100 WRFD040100
Flow Control
30~100
per cent
None
70 Board
None
Not involved
Not involved
None
CBSSW
BSC6900
Flow Control
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
GBFD117501
ms
None
6 Cell
This parameter is valid only when "MEASURETYPE" in "SET GCELLCCUTRANSYS" is set to EnhMeasReport.
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
CC
CC
BSC6900
MRFD210301
Configuration Management
0~65535
None None
None
BSC69 00 None
Not involved
Not involved
None
Radio
Whether to enable the certificate chain DISABLE: indicating that the certificate chain is disabled ENABLE: indicating that the SET certificate CERTFILE(Optio chain is nal) enabled
MRFD210305
Security Management
Enumeration Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
Time interval for sending overload messages, used for the BTS to notify the BSC of the load over a specific CCCH timeslot. See GSM Rec. GBFD0508. 111003 Used for the BTS to notify the BSC of the load over a specific CCCH timeslot, that is, the load of the access request messages over the RACHs and all the messages (including paging and packet immediate assignment messages) over the PCHs. See GSM Rec. GBFD0858. 111003
0~255
None
15 Cell
None
Not involved
Not involved
None
If this parameter is set to a smaller value, the status of RF resources is reported too frequently, thus burdening the BSC. If this parameter is set to a greater value, the status of RF resources cannot be updated in time; therefore, the BSC The parameter modification cannot handle the interference to the has no impact on the BTS, thus causing unreasonable channel Versions earlier than equipment. allocation. BSC6900 V900R011
Radio
CCCHLOAD THRES
BSC6900
20~100
per cent
None
80 Cell
None
Not involved
Not involved
None
If this parameter is set to smaller value, the signaling flow over the Abis interface increases, thus burdening the BSC. If this parameter is set to a greater value, the The parameter modification BSC cannot handle the exceptions on the has no impact on the BTS in time, thus causing network Versions earlier than equipment. congestion. BSC6900 V900R011
Radio
6/9/2013
Page45of316
150682621.xls.ms_office
Security Level:
CCDSCP
DSCP of CONV[QoS]
BSC6900
Gb over IP
0~63
None None
46 BSC
None
Not involved
Not involved
Not involved
BSC6900
Common channel ADD service TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
None The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Transpor t
Transpor t
Transpor t
BSC6900
Transmission ADD period of the ETHMA(Optional CCM packet GBFD) in the MA 118630 Threshold of forbidding directed retry for cells. When the value of "Assignment Cell Load Judge Enable" in "SET GCELLCCBA SIC" is ENABLE, if cells support directed retry and the current cell load is greater than or equal to the value of this parameter, the BSC allocates a channel to an MS through SET the process GCELLOTHEXT( of directed GBFDOptional) retry. 110607 Offset of the measurement report about the cells at the 1800 MHz frequency. Before cells are sequenced by priority according to frequencies, the value of this parameter must be added to the receive level value in the measurement report about the cells at GBFDSET the 1800 114301 GCELLCCUTRA MHz GBFDNSYS(Optional) frequency. 114302 Threshold of the measurement report about the cells at the 1800 MHz frequency. When the receive level value in the measurement report about the cells at the 1800 MHz frequency exceeds the value of this parameter, the report takes effect. After being filtered, the measurement report is used for priority sequencing of cells. The SET value 7 GCELLCCUTRA means NSYS(Optional) infinite. BCCH frequency of a 2G neighbor cell that MSs can measure in idle mode. Recording the BCCH frequencies of 2G neighbor cells that MSs can measure in idle mode, the BA1 table is sent in System SET Information GCELL2GBA1( 2, 2bis, and Mandatory) 2ter.
Ethernet OAM
Enumeration Type
ms
1000
Not involved
Not involved
Not involved
None
Transpor t
Direct Retry
0~100
per cent
None
90 Cell
None
Not involved
Not involved
None
Radio
CELL1800O FF
BSC6900
0~7, step: 6
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD114301 GBFD114302
0~7, step: 6
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
BSC6900
MRFD210301
Configuration Management
0~1023
None None
None
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page46of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
Whether to generate the 2G BA1 table automatically according to neighbor cell relations or to input the 2G BA1 table manually. Recording the BCCH frequencies of 2G neighbor cells that MSs can measure in idle mode, the BA1 table is sent in System SET Information GCELL2GBA1( 2, 2bis, and MRFDMandatory) 2ter. 210301 BCCH frequency of a 2G neighbor cell that MSs can measure in dedicated mode. Recording the BCCH frequencies of 2G neighbor cells that MSs can measure in dedicated mode, the BA2 table is sent in System SET Information GCELLHO2GBA 5, 5bis, and MRFD2(Mandatory) 5ter. 210301 This parameter indicate whether to generate the 2G BA2 table automatically according to neighbor cell relations or to input the 2G BA2 table manually. Recording the BCCH frequencies of 2G neighbor cells that MSs can measure in dedicated mode, the BA2 table is sent in System SET Information GCELLHO2GBA 5, 5bis, and MRFD2(Mandatory) 5ter. 210301 Timeslot power attenuation grade of the EDGE TRX in 8PSK modulation mode. There are 50 attenuation grades, each of which corresponds to an attenuation of 0.2 dB. When the EDGE TRX sends signals in 8PSK modulation mode, the transmit power must be lower than the mean power in SET GMSK GCELLBASICPA modulation GBFDRA(Optional) mode. 119115 Offset of the measurement report about the cells at the 900 MHz frequency. Before cells are sequenced by priority according to frequencies, the value of this parameter must be added to the receive level value in the measurement report about GBFDSET the cells at 114301 GCELLCCUTRA the 900 MHz GBFDNSYS(Optional) frequency. 114302 Threshold of the measurement report about the cells at the 900 MHz frequency. When the receive level value in the measurement report about the cells at the 900 MHz frequency exceeds the value of this parameter, the report takes effect. After being filtered, the measurement report is used for priority sequencing of cells. The GBFDSET value 7 114301 GCELLCCUTRA means GBFDNSYS(Optional) infinite. 114302 Whether the cell can be added to the reselected candidate cell list. If this parameter is set to "NoPermit", the cell cannot be reselected as the candidate cell for handover. If this parameter is set to "Permit", the cell can be reselected as SET the candidate GCELLSERVPA cell for GBFDRA(Optional) handover. 114101
Configuration Management
Enumeration Type
AUTO(Auto), MANU(Manu)
AUTO, MANU
None None
None
Cell
None
Not involved
Not involved
None
Radio
Configuration Management
0~1023
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Configuration Management
Enumeration Type
AUTO(Auto), MANU(Manu)
AUTO, MANU
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Power Control
0~50
None None
0 Cell
This parameter is valid only when "EDGE" in "SET GCELLGPRS" is set to YES.
Not involved
Not involved
This paramete r applies to only the The parameter modification EDGE has no impact on the trx. equipment. None
Radio
CELL900OF F
BSC6900
0~7, step: 6
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
CELL900TH RED
BSC6900
0~7, step: 6
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GPRS
Enumeration Type
None None
Permit
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page47of316
150682621.xls.ms_office
Security Level:
BSC6900
If the coverage type of a cell is outdoor coverage, the BTS detects whether the standing wave alarm is generated only when the forward power is greater than 35 dBm. If the coverage type of a cell is indoor coverage, the BTS detects whether the standing wave radio alarm is generated SET only when GCELLOTHEXT( the forward GBFDOptional) power is 111202 Even charging voltage of the battery. The battery is charged at the voltage SET as specified BTSPMUBP(Opti by this GBFDonal) parameter. 111202 Even charging voltage of the battery. The battery is charged at the voltage as specified by this parameter. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Float charging voltage of the battery. The battery is charged at the voltage SET as specified BTSPMUBP(Opti by this GBFDonal) parameter. 111202 Float charging voltage of the battery. The battery is charged at the voltage as specified by this parameter. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 ADD GCELLFREQ(M andatory) ADD GCELLHOPANT GRP(Mandatory) ADD GCELLMAGRP( Mandatory) ADD GCELLOSPMAP (Mandatory) SET GCELLAMRQUL (Mandatory) SET GCELLBASICPA RA(Mandatory) SET GCELLCCACCE SS(Mandatory) SET GCELLCCAD(M andatory) SET GCELLCCTMR( Mandatory) SET GCELLCCUTRA NSYS(Mandator y) Index of a SET cell, uniquely GCELLEXTMSR identifying a MRFDPARA(Mandator cell in a BSC 210301 ID of the cell. The cell ID cannot SET conflict with GMRSCOPE(Ma other cell IDs ndatory) in the BSC. SET Index of a GCELLHOINTE cell, uniquely RRATLDB(Mand identifying a atory) cell in a BSC Index of the cell. It uniquely identifies a cell.
O&M of BTS
Enumeration Type
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
283 None
BTS
The value of this parameter must be greater than "Float charging voltage" and at least one volt lower than "DC overvoltage alarm threshold".
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
None
None
BTS
The value of this parameter must be greater than "Float charging voltage" and at least three volts lower than "DC overvoltage alarm threshold".
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
268 None
BTS
The value of this parameter must be smaller than "Even Charging Voltage".
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
None
None
BTS
The value of this parameter must be smaller than "Even Charging Voltage".
Not involved
Not involved
None
Equipme nt
CELLID
Cell Index
BSC6900
Configuration Management
0~2047
None None
None
Cell
None
Not involved
Not involved
None
Radio
CELLID
Cell Index
BSC6900
MRFD210301
Configuration Management
0~2047
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
CELLID
Cell Index
BSC6900
MRFD211402
0~2047
None None
None
Cell
None
Not involved
Not involved
None
Radio
CELLID
Cell Index
BSC6900
CELLID
Cell Index
BSC6900
MRFD210301
Configuration Management
0~2047
None None
None
Cell
None
Not involved
Not involved
None
CELLIDLST
Cell List
BSC6900
GBFDCell Index 111202 List of the user-defined neighbor cells to be measured. This parameter is represented as a character string where the IDs of the cells to be measured are separated by &, such as 1&2&5. The BSC STR supports up GBFDNCS(Mandatory) to 50 cells. 510901 Type of indexing the cell when this SET commond is MRFDFHO(Mandatory) executed 210301 ADD BTSRETANT(Ma Type of an MRFDndatory) index 210301 Index type of the cell. BYNAME: query by cell SET name; BYID: BTSANTANGLE( query by cell MRFDMandatory) index. 210602 Whether a cell is an inner or extra cell in an ADD enhanced GCELL(Mandato dual band GBFDry) network 114402 A network basically consists of four layers, namely, Umbrella, Macro, Micro, and Pico.
O&M of BTS
0~2047
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
String Type
None
1~400 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Radio
CELLIDTYP E CELLIDTYP E
BSC6900
BSC6900
BYNAME(By name), BYID(By index) BYNAME, BYID BYNAME(By Name), BYID(By Index) BYNAME, BYID
None None
None
Cell
None
Not involved
Not involved
None
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
CELLIDTYP E
BSC6900
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
Inner(Inner), Extra(Extra)
Inner, Extra
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD110601 GBFD510501
Enumeration Type
1, 2, 3, 4
1, 2, 3, 4
None None
None
Cell
None
Not involved
Not involved
None
Radio
CELLLIST
BSC6900
List of cell indexes. All cell indexes are combined as a character string, separated by ADD "&". For GSMSCB(Option example, MRFDal) 1&2&5. 210301
Configuration Management
String Type
None
0~5000 characters
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
6/9/2013
Page48of316
150682621.xls.ms_office
Security Level:
Whether an assignment complete message contains a cell list. According to GSM Rec. 08.08, during a channel assignment, an assignment complete message contains a cell list only when the cell of the MS changes. For the MSCs of some vendors, however, assignment complete messages must contain cell lists. To meet such a requirement, the value of GBFDthis 111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
MSC
None
Not involved
Not involved
The setting of this paramete r needs negotiati on with the opposite network element MSC. If the MSC supports processin g assignme nt complete message s containin g cell lists, set this paramete r to YES; otherwis e, set this The parameter modification paramete has no impact on the r to NO. equipment. None
Radio
BSC6900
CELLNAME
Cell Name
BSC6900
CELLNAME
Cell Name
BSC6900
Maximum number of SDCCHs in the cell. Before converting a TCH into an SDCCH, the BSC compares the number of SDCCHs after the conversion in the cell with "Cell SDCCH Channel Maximum". If the number of SDCCHs after the conversion in the cell exceeds this parameter, the BSC does not SET convert the GCELLCHMGBA TCH into an GBFDSIC(Optional) SDCCH. 113001 ADD GCELLFREQ(M andatory) ADD GCELLHOPANT GRP(Mandatory) ADD GCELLMAGRP( Mandatory) ADD GCELLOSPMAP (Mandatory) SET GCELLAMRQUL (Mandatory) SET GCELLBASICPA RA(Mandatory) SET GCELLCCACCE SS(Mandatory) SET GCELLCCAD(M andatory) SET GCELLCCTMR( Mandatory) SET GCELLCCUTRA NSYS(Mandator y) Name of a SET cell, uniquely GCELLEXTMSR identifying a MRFDPARA(Mandator cell in a BSC. 210301 SET Name of a GCELLHOINTE cell, uniquely RRATLDB(Mand identifying a MRFDatory) cell in a BSC 211402 ADD BTSAUTOPLAN( Mandatory) SAV GCELLTEMPLA Name of a TE(Mandatory) cell. List of cell names. All cell names are combined as a character string, separated by "&". For example, cell1&cell2&c ell5. The cell name should not contain the following characters: ADD ?|:<>"@ GSMSCB(Option # ! % ^ & * . [ al) ] / \ \\ ' Threshold of the downlink receive level of an overcoverage cell. If the downlink level of a cell is higher than the value of this parameter and the timing advance (TA) is greater than the value of "Cell Over Coverage TA Threshold" in more than 20% measurement reports, the cell is defined SET as an overGCELLOTHEXT( coverage Optional) cell. Threshold of the TA of an overcoverage cell. If the downlink level of a cell is higher than the value of this parameter and the timing advance (TA) is greater than the value of "Cell Over Coverage TA Threshold" in more than 20% measurement reports, the SET cell is defined GCELLOTHEXT( as an overOptional) coverage
0~255
None None
80 Cell
This parameter is valid only when "SDDYN" in "SET GCELLBASICPARA" is set to YES.
Not involved
Not involved
None
If this parameter is set to a smaller value, dynamic adjustment may not be triggered when there are insufficient SDCCHs in the The parameter modification cell, this affects the access success rate. has no impact on the If this parameter is set to a greater value, Versions earlier than equipment. traffic volume on the TCH is decreased. BSC6900 V900R011
Radio
Configuration Management
String Type
None
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
String Type
None
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
Radio
CELLNAME
Cell Name
BSC6900
GBFD111202
O&M of BTS
String Type
None
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
MRFD210301
Configuration Management
String Type
None
0~5000 characters
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
GBFD110801 GBFD110802
0~63
dB
None
30 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD110801 GBFD110802
0~63
None None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
Maximum number of reported paging overload messages in the cell. If the BSC allows the flow control on the re-paging messages, and the number of the reported paging overload messages exceeds the value of this parameter, the BSC determines that the cell is in PCH overload GBFDstate. 111003
1~20
None None
4 Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
6/9/2013
Page49of316
150682621.xls.ms_office
Security Level:
CELLPWRO FFEN
BSC6900
CELLPWRO FFVOL
BSC6900
BSC6900
BSC6900
Whether to allow the power-off of the battery. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another mode. Battery power-off voltage. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another mode. This parameter specifies whether a 2G cell or 3G cell is selected in the inter-RAT cell reselection procedure. This parameter specifies that the accumulativel y calculated number of times that the downlink transmission quality of MS is lower than the transmission quality threshold of MS. The critical reselection needs to be performed when the ratio of the accumulativel y calculated number of times and the number of times in the downlink transmission quality measurement report
GBFD111202
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
GBFD111202
O&M of BTS
None
430 BTS
The value of this parameter must be smaller than "DC undervoltage alarm threshold".
Not involved
Not involved
None
Equipme nt
GBFD116201
Enumeration Type
2G, 3G
None None
2G
Cell
None
Not involved
Not involved
None
Radio
GBFD116201
0~100
None None
30 Cell
None
Not involved
Not involved
None
Radio
BSC6900
BSC6900
Information about cell scenario should be sent to the BTS. Based on the information, the BTS SET optimizes the GCELLBASICPA allocation of RA(Optional) resources. Whether an MS prioritizes a 3G cell after a call is released in an overlapped coverage SET area of the GCELLCCAD(O 2G and 3G ptional) networks.
GBFD510803 GBFD510804
COMMON(COM MON), MULTIPATH(MU LTIPATH), INDOOR(INDOO R), COMMON, HIGHWAY(HIGH MULTIPATH, WAY) INDOOR, HIGHWAY None None
COMMON
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GBFD114325
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
The feature of camping on the 3G cell after call release requires overlapped 2G/3G coverage area. Data services are preferably processed in the 3G network and speech services are preferably processed in the 2G network. When a handover from the 3G network to the 2G network is initiated, the call is handed The parameter modification over back to the 3G network after the call has no impact on the is complete, thus avoiding a location equipment. update. BSC6900 V900R011
Radio
BSC6900
The BTS reports an alarm if the temperature of battery group 1 exceeds the value of this parameter. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another MRFDptional) mode. 210304 The BTS reports an alarm if the temperature of battery group 1 is lower than the value of this parameter. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another MRFDptional) mode. 210304 Upper limit of the temperature measured by the temperature sensor of the battery group 1. If the measured value is greater than the value of this parameter, the value of this parameter is reported. In multi-mode scenario, the value of this parameter in this mode must be the SET same as the BTSAPMUBP(O value of the ptional) correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Lower limit of the temperature measured by the temperature sensor of the battery group 1. If the measured value is smaller than the value of this parameter, the value of this parameter is reported. In multi-mode scenario, the value of this parameter in this mode must be the SET same as the BTSAPMUBP(O value of the ptional) correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202
Faulty Management
500 BTS
The value of this parameter must be smaller than "Low Temp Alarm Assembled Bat2".
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
-100 BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
800 BTS
The value of this parameter must be greater than "Lower Assembled Bat1 TEMP Measure".
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
-200 BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page50of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether to allow the configuration of parameters related to the temperature compensatio n of the battery group In multi-mode scenario, the value of this parameter in this mode must be the SET same as the BTSAPMUBP(O value of the ptional) correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 CPU usage threshold for cell update. When the average CPU usage of sliding windows reaches or exceeds the threshold, cell update control is triggered. This parameter is valid only SET when "Board FCCPUTHD(Opti Class" is WRFDonal) "XPU". 040100 Packet queue usage threshold for cell update. When the average packet queue usage of sliding windows reaches or exceeds the threshold, cell update control is triggered. This parameter is valid only when "Board Class" is "XPU". CPU usage threshold for recovery from cell update control. When the average CPU usage of sliding windows is lower than the threshold, cell update control is stopped. This parameter is valid only when "Board Class" is "XPU". Packet queue usage threshold for recovery from cell update control. When the average packet queue usage of sliding windows is lower than the threshold, cell update control is stopped. This parameter is valid only when "Board Class" is "XPU". Whether to control cell updates Threshold of
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
NO
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Flow Control
30~100
per cent
None
85 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
80 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
75 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100 WRFD040100
Flow Control
30~100
per cent
None
70 Board
None
Not involved
Not involved
None
Flow Control
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
BSC6900
the downlink receive level of an weakcoverage cell. If the downlink level of a cell is lower than the value of this parameter and the timing advance (TA) is smaller than the value of "Cell Weak Coverage TA Threshold" in more than 30% measurement reports, the cell is defined SET as an weakGCELLOTHEXT( coverage Optional) cell. Threshold of
GBFD110801 GBFD110802
0~63
dB
None
20 Cell
None
Not involved
Not involved
None
Radio
CELLWEAK CVGTALTH
BSC6900
the TA of an weakcoverage cell. If the downlink level of a cell is lower than the value of this parameter and the timing advance (TA) is smaller than the value of "Cell Weak Coverage TA Threshold" in more than 30% measurement reports, the cell is defined GBFDSET as an weak- 110801 GCELLOTHEXT( coverage GBFDOptional) cell. 110802
0~63
None None
1 Cell
None
Not involved
Not involved
None
Radio
CENDTHD
BSC6900
CertChain
BSC6900
CFGFLAG
BSC6900
SET GTRXFC(Option al) SET CERTFILE(Mand atory) SET BTSFMUABP(M andatory) SET BTSNFCBBP(Ma ndatory) SET BTSPMUBP(Ma ndatory) SET BTSAPMUBP(M andatory) SET BTSDATUBP(Ma ndatory) SET BTSDEMUBP(M andatory) SET BTSDHEUBP(M andatory) SET BTSDOMUBP(M andatory) SET BTSDPMUBP(M andatory) SET BTSDTMUBP(M andatory) SET BTSPSUFP(Man datory) SET
Threshold for stopping LAPD link congestion control Name of the certificate chain file Whether to allow the configuration of alarm parameters. The value "YES" indicates that the configuration is allowed, and the value "NO" indicates that the configuration is not allowed. If the parameter is set to "YES", all the other parameters are reset to the default values in this command. In multi-mode scenario, the value of this parameter in this mode must be the same as the
GBFD111705 MRFD210305
20~90
per cent
None
60 TRX
None
Not involved
Not involved
String Type
None
0~200 characters
None None
None
RNC
None
Not involved
Not involved
The setting of this paramete r must be smaller than The parameter modification "CSTAR has no impact on the TTHD". equipment. None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
GBFD111202
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page51of316
150682621.xls.ms_office
Security Level:
CFGFLAG
Carry Flag
BSC6900
Whether to indicate that the IP path is carried on the IP logic port or SET resource GBFDBTSIP(Optional) group 118605 BTS configuration modes include auto plan mode and normal mode. In auto plan mode, the user can enable the auto planning algorithms and auto optimization algorithms according to the BTS type. In normal mode, the auto planning algorithms and auto SET optimization BTSAUTOPLAN algorithms GBFDCFG(Mandatory) are disabled. 510701 Whether to enable the board parameters to be configured. If this parameter is set to "YES", the user can set board parameters of the BTS cabinet. Otherwise, the user cannot set the board GBFDparameters. 111202 Whether to enable the board parameters to be configured. If this parameter is set to "YES", the user can set the cabinet power type. Otherwise, the user cannot set the cabinet GBFDpower type. 111202 Confirm password. The confirm password is required to ensure that a correct password is entered.
IP QOS
Enumeration Type
NULL(NULL), IPLGCPORT(IP Logic Port), RSCGRP(Resou NULL, IPLGCPORT, rce Group) RSCGRP None NULL
None
IP path None
IP path
None
Transpor t
CFGMODE
BSC6900
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
CFLAG
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
CFLAG
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
CFM
ADD OP(Mandatory)
GBFD111203 MRFD210305
Password Type
None G_15, G_17, G_19, G_21, G_23, G_25, G_27, G_29, G_31 G_16, G_18, G_20, G_22, G_24, G_26, G_28, G_30,
1~32 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
CG
Command Group
BSC6900
GBFD111203 MRFD210305
Enumeration Type
G_17, G_20, G_23, G_26, G_29, None None None RNC None
Not involved
Not involved
None
Equipme nt
CG
Command Group
BSC6900
ADD OP(Optional)
This parameter is valid only when the operator belongs to the custom level.
GBFD111203 MRFD210305
G_0~0 G_1~1 G_2~2 G_3~3 G_4~4 G_5~5 G_6~6 G_7~7 G_8~8 G_9~9 G_10~10 G_11~11 G_12~12 G_13~13 G_14~14 G_15~15 G_16~16 G_17~17 G_18~18 G_19~19 G_20~20 G_21~21 G_22~22 G_23~23 G_24~24 G_25~25 G_26~26 G_27~27 G_28~28 G_29~29 G_30~30 G_31
G_0, G_1, G_2, G_3, G_4, G_5, G_6, G_7, G_8, G_9, G_10, G_11, G_12, G_13, G_14, G_15, G_16, G_17, G_18, G_19, G_20, G_21, G_22, G_23, G_24, G_25, G_26, G_27, G_28, G_29, G_30, G_31
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
CGET
BSC6900
Congestion end threshold. If the congestion end threshold is large, the congestion control ends earlier. As a result, the congestion control effect is poor. The work of the Ater signaling link is GBFDdeteriorated. 111203
O&M of BSC
20~90
None
60
ATER CONS 60 L
None
Not involved
Not involved
The congestio n start threshold must be greater than the congestio n end The parameter modification threshold has no impact on the . equipment. None
Transpor t
CGET
BSC6900
Congestion end threshold. If the congestion end threshold is large, the congestion control ends earlier. As a result, the congestion control effect is poor. The work of the Ater signaling ADD link is GBFDPBSL(Optional) deteriorated. 111203 If the parameter is set to 1, it indicates that the CGI and RAC data is generated through automatic planning. If the parameter is set to 0, it indicates that the data SET needs to be BTSAUTOPLAN manually GBFDCFG(Optional) entered. 510701 Name of the command group. You SET can define CCGN(Optional) the name. Number of the cabinet group where the idle timeslot is located. GBFD111203 MRFD210305
O&M of BSC
20~90
None
60
ATER CONS 60 L
None
Not involved
Not involved
The congestio n start threshold must be greater than the congestio n end The parameter modification threshold has no impact on the . equipment. None
Transpor t
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
CGN
BSC6900
String Type
None
1~32 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
CGN
GBFD114101
GPRS
0~2
None None
None
BTS
None
Not involved
Not involved
None
Radio
6/9/2013
Page52of316
150682621.xls.ms_office
Security Level:
CGST
BSC6900
Congestion start threshold. If congestion start threshold is set to a large value, the congestion control becomes a time lag and the work of the signaling link is deteriorated. The interval between congestion start threshold and congestion end threshold should not be too small. Otherwise, the work of the signaling link is instable. The congestion control starts GBFDfrequently. 111203 Congestion start threshold. If congestion start threshold is set to a large value, the congestion control becomes a time lag and the work of the signaling link is deteriorated. The interval between congestion start threshold and congestion end threshold should not be too small. Otherwise, the work of the signaling link is instable. The congestion control starts GBFDfrequently. 111203 Congestion start threshold. If congestion start threshold is set to a large value, the congestion control becomes a time lag and the work of the signaling link is deteriorated. The interval between congestion start threshold and congestion end threshold should not be too small. Otherwise, the work of the signaling link is instable. The congestion control starts GBFDfrequently. 111203
O&M of BSC
30~100
None
90
90 BSC
None
Not involved
Not involved
The congestio n start threshold must be greater than the congestio n end The parameter modification threshold has no impact on the . equipment. None
Transpor t
CGST
BSC6900
O&M of BSC
30~100
None
90
ATER CONS 90 L
None
Not involved
Not involved
The congestio n start threshold must be greater than the congestio n end The parameter modification threshold has no impact on the . equipment. None
Transpor t
CGST
BSC6900
ADD PBSL(Optional)
O&M of BSC
30~100
None
90
90 BSC
None
Not involved
Not involved
The congestio n start threshold must be greater than the congestio n end The parameter modification threshold has no impact on the . equipment. None
Transpor t
CHAINNCEL LTYPE
BSC6900
This parameter indicates the geographical location relation between the neighboring cell and the serving cell. In the BSC, if direction A is selected, ADD then the G2GNCELL(Opti reverse GBFDonal) direction is B. 510103 Combination type of RXU chains. "CHAINTORI NG" indicates that one RXU chain changes to a ring, and "COMBINEC HAINS" indicates that two RXU CBN chains are BTSRXUCHAIN( combined GBFDMandatory) into one ring. 111202 Channel assignment priority of the cell If this parameter is set to CAPABILITY , the factors are listed as follows in a descending order of priority: capacity factors, quality factors, PS cooperation factors, and management factors. If this parameter is set to QUALITY, the factors are listed as follows in a descending order of SET priority: GCELLCHMGBA quality GBFDSIC(Optional) factors, 111005 Channel number of a simple cell broadcast message. This is a key parameter for adding a simple cell broadcast message. You can use SET "DSP GCELLSBC(Opti GSMSCB" to onal) query and ADD obtain the GSMSCB(Mand value of this GBFDatory) parameter. 113602
Enumeration Type
QUICK_HO_NCE LL_TYPE_A(QUI CK_HO_NCELL_ TYPE_A), QUICK_HO_NCE QUICK_HO_NCELL LL_TYPE_B(QUI _TYPE_A, CK_HO_NCELL_ QUICK_HO_NCELL TYPE_B) _TYPE_B
Cell
None
Not involved
Not involved
None
The setting of this parameter depends on The parameter modification the actual physical location of the chain has no impact on the neighboring cell. Otherwise, fast PBGT equipment. handover may fail. BSC6900 V900R011
Radio
CHAINTORI NG
Combine Type
BSC6900
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
Enumeration Type
CAPABILITY(Ca pability preferred), QUALITY(Quality preferred), PSRELATIVELY( PS relatively preferred), PSABSOLUTEL Y(PS absolutely preferred)
None None
CAPABILITY
Cell
None
Not involved
Not involved
None
Radio
CHANID
Chan ID
BSC6900
0~65535
None None
None
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page53of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether to measure the channel interference during channel assignment. If this parameter is set to NO, the BSC does not measure the channel interference or send an interference indication during channel assignment. If this parameter is set to YES, the BSC measures the channel interference SET during GCELLCHMGA channel D(Optional) assignment. When the value of this parameter is YES, if the assignment request message sent by the MSC contains the channel rate type indicating the support of both full and half rates, and contains the speech version indicating the selection of full rate speech version only or half rate speech version only, the BSC decodes the channel rate type into the SET selection of AITFOTHPARA( full rate only Optional) or half rate
GBFD111005
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
MSC
None
Not involved
Not involved
BSC6900
Ping check timeout counts. The parameter indicates the times of the ADD timeout IPPATH(Optional record ) failures. Whether to enable the BSC to check automatically whether a BTS is connected a proper E1 port in the EIUa. If a BTS is connected to an E1 port configured for another BTS in the EIUa, the BTS cannot be reset automatically after the BTS is initialized. Thus, the data configuration s on the BTS side differ from the data SET configuration OTHSOFTPARA s on the BSC (Optional) side. Alarm mode of the ANT_A tributary of an RXU board. There are three alarm modes. Alarm mode 1 has only one type of alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 2 has two types of alarms: warning alarms and critical alarms. The alarm current is fixed and greater than the normal working SET current. BTSRXUBP(Opti Alarm mode onal) 3 has two Alarm mode of the ANT_B tributary of an RXU board. There are three alarm modes. Alarm mode 1 has only one type of alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 2 has two types of alarms: warning alarms and critical alarms. The alarm current is fixed and greater than the normal working SET current. BTSRXUBP(Opti Alarm mode onal) 3 has two Detection index. The index is a unique value ranging from 0 to 511 if it STR is not IPCHK(Optional) specified. ADD IPPATHBIND(Ma Detection ndatory) index
None
None
1~5
None
When the value of "PATHCHK" in "ADD IPPATH" is set to ENABLED, this 5 IP path parameter is valid.
Not involved
Not involved
None The purpose of setting this paramete r is to avoid call connectio n failure when an MS supportin g the full rate channel only requests a half rate channel or an MS supportin g the half rate channel only requests a full rate channel. In this way, the BSC can easily interconn When the network status is poor, the check count should not be too small. Otherwis e, the path state is affected.
Radio
Radio
Transpor t
MRFD210206
Tree Topology
Enumeration Type
NO, YES
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Equipme nt
ChkModA
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
None MODE2
MODE2
BTS
None
Not involved
Not involved
None
Equipme nt
ChkModB
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
None MODE2
MODE2
BTS
None
Not involved
Not involved
None
Equipme nt
CHKN
Check Index
BSC6900
GBFD118609 GBFD118609
CHKN
Check Index
BSC6900
0~511
None None
None
None
None
Not involved
Not involved
Not involved
0~511
None None
None
None
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
BSC6900
Total number of times that the BTS checks whether to SET switch off the BTSAIRCON(Op air GBFDtional) conditioner 111202
O&M of BTS
5~20
None None
10 BTS
None
Not involved
Not involved
Equipme nt
BSC6900
Total number of times that the BTS checks whether to SET switch on the BTSAIRCON(Op air GBFDtional) conditioner 111202
O&M of BTS
5~20
None None
10 BTS
None
Not involved
Not involved
Equipme nt
6/9/2013
Page54of316
150682621.xls.ms_office
Security Level:
CHKSUMRX
BSC6900
None
None
Enumeration Type
NO(NO), YES(YES)
NO, YES
None NO
NO
SCTP link
None
SCTP link
The services are interrupted until the SCTP link is working normally.
The checksu m mode need the negotiati on with the peer. Accordin g to the RFC4960 , the value should be The parameter modification set to has no impact on the CRC32. equipment. None The checksu m mode need the negotiati on with the peer. Accordin g to the RFC4960 , the value should be The parameter modification set to has no impact on the CRC32. equipment. None
Transpor t
CHKSUMTX
BSC6900
CHKSUMTY PE
Checksum arithmetic
BSC6900
Whether to calculate ADD checksum SCTPLNK(Optio when sending nal) message. None Checksum arithmetic type. According to the RFC4960, the ALDER32 algorithm is not applicable to ADD the SCTP SCTPLNK(Optio checksum. nal) The CRC32 None
None
Enumeration Type
NO(NO), YES(YES)
NO, YES
None NO
NO
SCTP link
None
SCTP link
The services are interrupted until the SCTP link is working normally.
Transpor t
None
Enumeration Type
None CRC32
CRC32
SCTP link
None
SCTP link
The services are interrupted until the SCTP link is working normally.
None
Transpor t
CHKTYPE
Check type
BSC6900
BSC6900
GBFD118609 GBFD111207
Enumeration Type
None None
None
None
None
Not involved
Not involved
Not involved
0~12
None
None
None
None
Not involved
Not involved
CHNNO
Channel No.
BSC6900
CHNNO
Channel No.
BSC6900
CHNO
Channel No.
BSC6900
SET BTSCHNFALLBA CK(Mandatory) SET TCPLYVOICE(M andatory) SET FHO(Mandatory) SET GTRXCHANHOP (Mandatory) SET GTRXCHAN(Ma ndatory) SET GTRXCHANAD MSTAT(Mandato ry) STR BTSTST(Mandat ory)
Number of the channel in MRFDthe TRX 210301 Timeslot for GBFDplaying sound 111203
Configuration Management
1~7
None None
None
BTS
None
Not involved
Not involved
O&M of BSC
0~169
None None
None
Board
None
Not involved
Not involved
The paramete r cannot be modified. Not involved The parameter modification has no impact on the None equipment. This paramete r is supporte d only by the following types of BTSs: BTS3012 , BTS3006 C, BTS3012 AE, BTS3012 II, and The parameter modification BTS3002 has no impact on the E. equipment. The parameter modification has no impact on the None equipment.
None
Transpor t Equipme nt
None
BSC6900 V900R011
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
None
Radio
Configuration Management
Interval Type 0~7 TRXRFSELFLO OP(TRX RF Self Loopback Test), BIULOOP(BIU Loopback Test), BTSSPEECHLO OP(BTS Speech Loopback Test), TRXSPEECHLO OP(TRX Speech Loopback Test)
0~7
None None
None
Not involved
Not involved
Not involved
None
Radio
CHNTYPE
Channel Type
BSC6900
STR Type of BTSTST(Mandat channel ory) loopback test Channel type of the timeslot on the TRX. The channel type of timeslot 0 must not be set, because the combined BCCH is configured by default. The channel type of other timeslots can be set to fullSET rate TCH or BTSCHNFALLBA half-rate CK(Mandatory) TCH.
GBFD111207
Enumeration Type
None
None
None
Not involved
Not involved
MRFD210301
Configuration Management
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
BSC6900
Whether an assignment complete message contains the information element of Chosen Channel
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
MSC
None
Not involved
Not involved
BSC6900
Whether a handover performed message contains the information element of Chosen Channel
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
MSC
None
Not involved
Not involved
None This paramete r is supporte d only by the following types of BTSs: BTS3012 , BTS3006 C, BTS3012 AE, BTS3012 II, and BTS3002 E. The setting of this paramete r needs negotiati on with the opposite network element MSC. If the MSC supports processin g assignme nt complete message s containin g the Chosen Channel, set this paramete r to YES; otherwis e, set this paramete r to NO. The setting of this paramete r needs negotiati on with the opposite network element MSC. If the MSC supports processin g handover performe d message s containin g the Chosen Channel, set this paramete r to YES; otherwis e, set this paramete
BSC6900 V900R011
Equipme nt
Radio
Radio
Radio
6/9/2013
Page55of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether an HO REQ ACK message contains the information element of Chosen Channel
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
MSC
None
Not involved
Not involved
BSC6900
Whether an encryption complete message contains the information element of Chosen Encryption Algorithm
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
MSC
None
Not involved
Not involved
BSC6900
Whether a handover performed message contains the information element of Chosen Encryption Algorithm
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
MSC
None
Not involved
Not involved
BSC6900
Whether an assignment complete message contains the information element of Chosen Encryption Algorithm
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
MSC
None
Not involved
Not involved
BSC6900
BSC6900
Whether an HO REQ ACK message contains the information element of Chosen Encryption Algorithm Whether to allow a multidensity TRX board that uses the dynamic power sharing algorithm to assign channels to assign a channel to an MS when the remaining power on the multi-density TRX board is less than the power required by the MS. If this parameter is set to YES, a multi-density TRX board that uses the dynamic power sharing algorithm to assign channels
GBFD111804
Enumeration Type
NOSENDING(Fo rce NO Sending), SYSTEMOPT(Sy stem Optimization), NOSENDING, SENDING(Force SYSTEMOPT, Sending) SENDING
None None
SYSTEMOPT
MSC
None
Not involved
Not involved
The setting of this paramete r needs negotiati on with the opposite network element MSC. If the MSC supports processin g HO REQ ACK message s containin g the Chosen Channel, set this paramete r to YES; otherwis e, set this paramete r to NO. The setting of this paramete r needs negotiati on with the opposite network element MSC. In this way, the MSC can process encryptio n complete message s correctly. The setting of this paramete r needs negotiati on with the opposite network element MSC. In this way, the MSC can process handover performe d message s The setting of this paramete r needs negotiati on with the opposite network element MSC. In this way, the MSC can process assignme nt complete message s correctly. An assignme nt complete message contains the Chosen Encryptio n Algorithm only The setting of this paramete r needs negotiati on with the opposite network element MSC. SENDIN G: The HO REQ ACK message contains the Chosen Encryptio n Algorithm . NOSEND ING: The HO REQ ACK message does not contain the Chosen Encryptio
Radio
Radio
Radio
Radio
Radio
GBFD111005
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
Not involved
Not involved
None
Radio
BSC6900
Maximum number of allowable CS domain channel request messages within the value of "CHAN REQ Statistical GBFDPeriod" 111705 Average number of allowable PS domain channel request messages within the value of "CHAN REQ Statistical GBFDPeriod" 111705
10~800
None None
Not involved
Not involved
None
Radio
10~800
None None
Not involved
Not involved
None
Radio
6/9/2013
Page56of316
150682621.xls.ms_office
Security Level:
CHREQSTA TPERIOD
BSC6900
Statistic period of the arrival rate of channel request messages. Within the preset value of this parameter, the BSC counts the number of channel request messages. Once the current total number of times exceeds the value of the allowable number of channel request messages of CPU0 within the statistic period, the BSC begins to discard subsequent GBFDchannel 111705 Type and function of the channel Combined BCCH+7TCH Main BCCH+SDC CH/8+6TCH Main BCCH+2SDC CH/8+5TCH Main BCCH+SDC CH/8+extend ed BCCH (BCH)+5TCH Main BCCH+SDC CH/8+extend ed BCCH (BCH)+TCH+ extended BCCH (BCH)+3TCH The BCCHs in a cell need to be MRFDconfigured 210301
100~600000
ms
None
Not involved
Not involved
The smaller the value of this paramete r is, the more sensitivel y the BSC controls the arrival rate of channel request message s, and The parameter modification vice has no impact on the versa. equipment. None
Radio
CHTYPE
Channel Type
BSC6900
CI
Cell CI
BSC6900
SET GTRXCHAN(Opt ional) ADD GCELL(Mandato ry) ADD GEXT2GCELL( Mandatory) ADD GEXT3GCELL( Mandatory) SET FHO(Mandatory) ADD GCELLQUICKS ETUP(Mandator y) ADD BTSAUTOPLAN( Mandatory) SET BTSAUTOPLAN CFG(Optional)
Configuration Management
Enumeration Type
TCHFR(TCH Full Rate), TCHHR(TCH Half Rate), SDCCH8(SDCC H8), MBCCH(Main BCCH), CBCCH(Combine d BCCH), BCH(BCH), BCCH_CBCH(BC CH+CBCH), SDCCH_CBCH(S DCCH+CBCH), PBCCH_PDTCH( PBCCH+PDTCH) , PCCCH_PDTCH( PCCCH+PDTCH) , PDTCH(PDTCH), DPDCH(Dynamic PDCH)
TCHFR, TCHHR, SDCCH8, MBCCH, CBCCH, BCH, BCCH_CBCH, SDCCH_CBCH, PBCCH_PDTCH, PCCCH_PDTCH, PDTCH, DPDCH
None None
None
Channel
None
Radio
Identity code of a cell. A cell is a wireless coverage area identified by a base station identity code and a global cell MRFDidentification 210301
Configuration Management
0~65535
None None
None
Cell
None
Not involved
Not involved
None
Radio
CI1
Cell CI
BSC6900
Cell identity code. The cell is a radio coverage area that is identified by the BTS identity code SET and global BTSAUTOPLAN cell identity MRFDCFG(Optional) code. 210301 It indicates the A interface CIC. When operation mode is set to OPC index, DPC group index, BSC ID, or CIC, the parameter is mandatory. The parameter BLK supports ACIC(Mandatory multiple GBFD) values. 111803 It indicates the Pb interface CIC. 2. If the search object mode is set to search by the specified No., the parameter is mandatory. The parameter BLK supports PBCIC(Mandator multiple GBFDy) values. 111203
Configuration Management
0~65535
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
CIC
CIC
BSC6900
0~65535
None None
None
E1/T1 link
When the value of "OPMODE" of "BLK ACIC" is BYCICVALUE, the value of CIC needs to be set.
Not involved
Not involved
1. The block of A interface must be configure d. 2. If A over IP is configure d, the configura tion does not support the The parameter modification operation has no impact on the . equipment. None
Equipme nt
CIC
CIC
BSC6900
O&M of BSC
0~65535
None None
None
None
None
Not involved
Not involved
Not involved
BSC6900
Whether an assignment failure message contains the information element of Circuit Pool
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
MSC
None
Not involved
Not involved
BSC6900
Whether an HO FAIL message contains the the information element of Circuit Pool
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
MSC
None
Not involved
Not involved
CicPoolListIn CIC Pool List Send AssFail Flag in ASS Fail BSC6900
Whether an assignment failure message contains the the information element of Circuit Pool List
GBFD111804
Enumeration Type
NOTSENDING(N ot sending), SENDINGPRO(s ending according to protocol), SENDING(uncon NOTSENDING, ditionally SENDINGPRO, sending) SENDING
None None
NOTSENDING
MSC
None
Not involved
Not involved
The paramete r cannot be modified. The setting of this paramete r needs negotiati on with the opposite network element MSC. In this way, the MSC can process assignme nt complete message s correctly. The setting of this paramete r needs negotiati on with the opposite network element MSC. In this way, the MSC can process HO FAIL message s correctly. The setting of this paramete r needs negotiati on with the opposite network element MSC. In this way, the MSC can process assignme nt failure message s correctly. NOSEND ING: The assignme nt failure message does not contain the Circuit Pool List. SENDIN GPRO: If the
Not involved
None
Transpor t
Radio
Radio
Radio
6/9/2013
Page57of316
150682621.xls.ms_office
Security Level:
Whether an HO FAIL message contains the the information element of Circuit Pool List
GBFD111804
Enumeration Type
NOTSENDING(N ot sending), SENDINGPRO(s ending according to protocol), SENDING(uncon NOTSENDING, ditionally SENDINGPRO, sending) SENDING
None None
NOTSENDING
MSC
None
Not involved
Not involved
BSC6900
Whether an assignment complete message contains the information element of Circuit Pool
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
MSC
None
Not involved
Not involved
CIC Pool Send CicPoolSend FlagIn HO REQ FlagInHoAck ACK Bandwidth [64kbps]
BSC6900
CIR
BSC6900
CIRESTVAL UE
Whether an HO REQ ACK message contains the SET information MSGSOFTPAR element of A(Optional) Circuit Pool ADD Bandwidth of IPLOGICPORT( the logical Mandatory) port This parameter specifies the estimated carrier-tointerference ratio of a new call. It is used for the Huawei power control algorithm III to calculate SET the power GCELLCHMGA required for D(Optional) the call. Number of the slot for the BSC board that connects to the DXX Number of the subrack for the BSC board that connects to the DXX
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
None
None
64~64000, step:64
kbit/s None
None
None
Not involved
Not involved
The setting of this paramete r needs negotiati on with the opposite network element MSC. In this way, the MSC can process HO FAIL message s correctly. The setting of this paramete r needs negotiati on with the opposite network element MSC. If the MSC does not support process assignme nt complete message s containin g the Circuit Pool, the value YES of this paramete r makes no sense. The setting of this paramete r needs negotiati on with the opposite network element MSC. If the MSC does not support process assignme nt complete message s containin g the Circuit Pool, the value YES of this paramete r makes no sense.
Radio
Radio
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Transpor t
None
None
0~22
dB
None
22 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD111202
O&M of BTS
0~27
None None
None
BSC69 00 None
BTS
None
Equipme nt
BSC6900
GBFD111202
O&M of BTS
0~11
None None
None
BSC69 00 None
BTS
None
Radio
BSC6900
CLASSMAR KQUERY
Whether the cell supports the MS with the DTM SET multi-timeslot GCELLGPRS(O capability of ptional) class 11. Whether to enable the BSC to include the 3G classmark information element in the Classmark Request message that the BSC forwards SET from the OTHSOFTPARA MSC to an (Optional) MS
GBFD119403
Class11 DTM
Enumeration Type
None None
None
Cell
This parameter is valid only when "GPRS" is set to SupportAsInnPcu and "SUPPORTDTM" is set Read & to SUPPORT. Write
Not involved
Not involved
None
Radio
GBFD110501
Call Control
Enumeration Type
NO(No), YES(Yes) ERR_PFM_1E6( RECOVERY:1E6), ERR_PFM_5E6( RECOVERY:5E6), ERR_PFM_1E5( RECOVERY:1E5), ERR_PFM_5E5( RECOVERY:5E5), ERR_PFM_1E4( RECOVERY:1E4), ERR_PFM_5E4( RECOVERY:5E4), ERR_PFM_1E3( RECOVERY:1E3) INCLK(Internal Clock), BSCCLK(Trace BSC Clock), EXCLK(External Synchro Clock), IPCLK(IP Clock), TRANSCLK(Trac e Trans Clock), GPSCLK(Trace GPS Clock), UMCLK(Um Clock), MOMTCLK(Multi mode Other Mode Transmission Clock)
NO, YES
None None
NO
BSC69 00 None
Not involved
Not involved
None
Radio
CLEARTHD
BSC6900
GBFD118611 GBFD118622
Enumeration Type
None None
ERR_PFM_5E6
Board
None
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
CLKMOD
Clock Mode
BSC6900
Clock mode
GBFD111202
O&M of BTS
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
Type of the clock SET protocol for BTSIPCLKPARA the IP clock (Optional) server
GBFD111202
O&M of BTS
Enumeration Type
None
BTS
None
Not involved
Not involved
None
Radio
6/9/2013
Page58of316
150682621.xls.ms_office
Security Level:
ClkType
Clock Type
BSC6900
Clock mode of the BTS. If this parameter is set to INT_CLK, the BTS does not track any external clock. The internal high precision clock works in free-run mode. If this parameter is set to TRCBSC_CL K, the BTS tracks the clock signals received from the BSC. If this parameter is set to EXCLK, the BTS tracks the clock SET signals BTSCLK(Mandat received MRFDory) from the 210501 Delay for which the BTS waits to run the burglar alarm clearance command SET after BTSTHEFTALM( reporting the GBFDOptional) burglar alarm 111202 Whether the alarm to be queried is cleared. You can select "cleared" or EXP "uncleared", ALMLOG(Option or both of al) them. By STA default, both ALMLOG(Option of them are MRFDal) selected. 210304 Interval at which the BTS runs the burglar alarm SET clearance BTSTHEFTALM( command GBFDOptional) automatically 111202 Name of the command to be queried. You can select one or EXP more LOG(Optional) commands. You can ADD select one or CCG(Mandatory more ) commands. SET LOGCFG(Mand atory) CmdCode
BTS/NodeB Clock
Enumeration Type
INT_CLK(Internal Clock), TRCBSC_CLK(T race BSC Clock), EXTSYN_CLK(E xternal Sync clock), IP_TIME(IP Clock), IP_TRANSFER(T race Transport Clock), TRCGPS_CLK(T race GPS Clock), UM_CLK(Um Clock), MOTHER_CLK( Multimode other mode transmission clock)
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
ClrDelay
BSC6900
O&M of BTS
0~255
None
None
BTS
This parameter is valid only when "AntiTheftAllow" is set to Read & YES. Write
Not involved
Not involved
None
Equipme nt
clrflg
BSC6900
Faulty Management
cleared, uncleared
cleared, uncleared
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
ClrInterval
BSC6900
O&M of BTS
0~255
None
None
BTS
This parameter is valid only when "AntiTheftAllow" is set to Read & YES. Write
Not involved
Not involved
None
Equipme nt
CMD
Command Name
BSC6900
CMD
Command Name
BSC6900
O&M of BSC Security Management O&M of BSC Security Management Faulty Management
String Type
None
1~200 characters
None None
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
String Type
None
0~128 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt Equipme nt
CMDCODE
CmdCode
BSC6900
{0~65535}
None None
None
RNC
None
Not involved
Not involved
None
BSC6900 V900R011
CMDSEQ
Command Sequence
BSC6900
Sequence number of the command ADD string of the SUBCMD(Manda scheduled GBFDtory) subtask. 111203
O&M of BSC
0~19
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
CN
Cabinet No.
BSC6900
CN
Cabinet No.
BSC6900
ADD Number of CAB(Mandatory) the cabinet SWP BTSRING(Optio nal) SWP BTSOMLLINK(O ptional) ADD TRXBIND2PHYB RD(Optional) SET BTSFMUABP(O ptional) SET BTSAPMUBP(O ptional) SET BTSDATUBP(Op tional) SET BTSDEMUBP(O ptional) SET BTSDHEUBP(Op tional) SET BTSUSCUBP(Op tional) SET BTSCABPARA( Mandatory) SET BTSPOWERTY PE(Mandatory) Number of SET the cabinet ADD BTSBFD(Option al) ADD BTSIPRTBIND( Optional) ADD BTSSFPMODE( Optional) SET BTSFORBIDTS( Optional) SET BTSOMLTS(Opti onal) ADD BTSTOPCONFI G(Optional) SET BTSETHPORT( Optional) ADD BTSPPPLNK(Op tional) ADD BTSMPLNK(Opti onal) ADD BTSETHMA(Opti onal) ADD BTSETHLCMEP( Optional) LOD RETANTCFG(O ptional) SET BTSANTANGLE( Optional) SET BTSCLKPARA( Optional) SET BTSCAVFRQ(O ptional) SET BTSPMUDEF(O ptional) SET BTSTMA(Option al) SET RETANTENB(Op tional) STR BTSBATTTST(O ptional) STR RETANTSCAN( Optional) STR TRANSPERFTS T(Optional) SWP BTSBRD(Option al) SET
MRFD210301
Configuration Management
1~3
None None
None
None
None
Not involved
Not involved
Not involved
None
Equipme nt
GBFD111202
O&M of BTS
0~62
None None
None
BTS
The value range of this parameter varies with BTS type. Different types of BTSs support a different number of cabinets. The value range of this parameter varies with BTS type. Different types of BTSs support a different number of cabinets.
Not involved
Not involved
None
Equipme nt
CN
Cabinet No.
BSC6900
GBFD118609
0~62
None
0 None
BTS
Not involved
Not involved
None
Equipme nt
CN
BSC6900
GBFD111202
O&M of BTS
0~62
None None
None
BSC69 00 None
BTS
None
Radio
CN
Cabinet No.
BSC6900
GBFD111202
O&M of BTS
0~62
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
Time delay of the detection on core network interface failure. Within the preset value of this parameter, the BSC continuously detects core network interface failures and then releases the management SET right of GBSCREDGRP( service GBFDOptional) objects. 113725
1~60
30
30 Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page59of316
150682621.xls.ms_office
Security Level:
CNID
MSC ID
BSC6900
Used to ADD uniquely GCNNODE(Man identify an datory) MSC ADD NSE(Mandatory) ADD SGSNNODE(Ma ndatory) ADD NRISGSNMAP( Mandatory)
GBFD117401
MSC Pool
0~4095
None None
None
MSC
None
Not involved
Not involved
None
Equipme nt
CNID
SGSN Node ID
BSC6900
CNMNGMO DE
BSC6900
Identifies a node of SGSN with the operator name GBFDuniquely. 119701 Resource management mode. When the interface type is IUB, the value can be set to SHARE or EXCLUSIVE. When the interface type is IUR, IUCS, or IUPS, the ADD value can be ADJMAP(Manda set to tory) SHARE only. None ADD NRIMSCMAP(M andatory) SET MSGSOFTPAR A(Mandatory) SET AITFOTHPARA( Mandatory) SET BSCAITFTMR(M andatory) ADD GCNNODE(Man Node index datory) of an MSC CMP LICENSE(Option Index of the al) operator ADD RSCGRP(Manda tory) Operator ADD index of the ADJMAP(Manda resource tory) group
SGSN Pool
0~4095
None None
None
NSE
None
Not involved
Not involved
None
Equipme nt
None
Enumeration Type
None None
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
GBFD117401 MRFD210403
0~31
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
Operator Index
BSC6900
0~3
None None
None
None
None
Not involved
Not involved
The value of this paramete r cannot be changed. Not involved None The parameter modification has no impact on the None equipment. None The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
Equipme nt Equipme nt
None
None
0~3
None None
None
Trans mission When "RSCMNGMODE" resour in "ADD RSCGRP" is set ce to EXCLUSIVE, this Read & group parameter is valid. Write
Not involved
Not involved
Not involved
None
Equipme nt
BSC6900
None
None
0~3
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
BSC6900
Policy of the BSC for judging whether the interface status of the core network is normal. If the value is NONE, the BSC does not change the service management right. If the value is AINTFBLOC K, the BSC releases the service management right when detecting SET disconnection GBSCREDGRP( at the A GBFDOptional) interface. 113725 Number of returned alarm records. By default, 64 records can EXP be returned ALMLOG(Option in each al) query.
Enumeration Type
None NONE
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
cnt
MRFD210304
Faulty Management
1~150000
None
64 None
RNC
None
Not involved
Not involved
None
Equipme nt
CNT
Cabinet Type
BSC6900
Type of the cabinet. The slot and subrack arrangement s in a cabinet vary SET according to BTSBAT(Mandat the cabinet GBFDory) type. 111202
O&M of BTS
Enumeration Type
BTS3002C, BTS3012A, BTS3006A BTS3012(BTS30 12), BTS3012AE(BTS 3012AE), BTS3006C(BTS3 006C), BTS3012_II(BTS 3012 II), BTS3002E(BTS3 002E), DBS3900_GSM( DBS3900 GSM), BTS3900_GSM( BTS3900 GSM), BTS3900A_GSM (BTS3900A GSM), DBS3036(DBS30 36), BTS3036(BTS30 36), BTS3036A(BTS3 036A)
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
CNT
Cabinet Type
BSC6900
CNTL
Type of the BTS cabinet SET where the BTSDPMUBP(M DMPU is andatory) installed Maximum number of records SET allowed in LOGLIMIT(Optio the operation nal) log
O&M of BTS
Enumeration Type
BTS3012, BTS3012AE, BTS3006C, BTS3012_II, BTS3002E, DBS3900_GSM, BTS3900_GSM, BTS3900A_GSM, DBS3036, BTS3036, BTS3036A
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
10000~50000
None None
None
RNC
None
Not involved
Not involved
Assume that this threshold is not 0. When the accumulated number of alarm blink times exceeds the threshold, the alarm is reported. For querying the alarm blink measurement period, see "LST ALMBLKSW" . For setting the alarm blink measurement period, see "SET ALMBLKSW" MRFD. 210304
Faulty Management
0~250
None None
None
None
1. If you set "Upper count threshold of raised fault" and "Lower count threshold of raised fault" to "0", the accumulated number of blink times for the alarm is counted but not reported. 2. If "Upper count threshold of raised fault" is not "0", the value of "Lower count threshold of raised fault" cannot be "0" and you must ensure that "Upper count threshold of raised fault" is greater than "Lower count threshold of raised fault". 3. When "Upper count threshold of raised fault" is not "0" and "Alarm switch of blinking filter" and "Switch of stat blinking alarm" are "ENABLE", you cannot set "Alarm blink threshold" to "0". Otherwise, blink statistics of the alarm is Read & not performed. Write
Not involved
Not involved
Assume that this threshold is not 0. When the number of alarm blink times is smaller than the threshold, the alarm is reported. For querying the alarm blink measurement period, see "LST ALMBLKSW" . For setting the alarm blink measurement period, see "SET ALMBLKSW" MRFD. 210304 Whether to adjust the candidate cell queue to give priority to intraBSC/MSC handover
Faulty Management
0~250
None None
None
None
1. If you set "Upper count threshold of raised fault" and "Lower count threshold of raised fault" to "0", the accumulated number of blink times for the alarm is counted but not reported. 2. If "Lower count threshold of raised fault" is not 0, the value of "Upper count threshold of raised fault" cannot be 0 and you must ensure that "Lower count threshold of raised fault" is smaller than "Upper count threshold of raised fault". 3. When "Upper count threshold of raised fault" is not "0" and "Alarm switch of blinking filter" and "Switch of stat blinking alarm" are "ENABLE", you cannot set "Alarm blink threshold" to "0". Otherwise, blink statistics of the alarm is Read & not performed. Write
Not involved
Not involved
None 1. If you set "Upper count threshold of raised fault" and "Lower count threshold of raised fault" to "0", the accumula ted number of blink times for the alarm is counted but not reported. 2. If "Upper count threshold of raised fault" is not "0", the value of "Lower count 1. If you set "Upper count threshold of raised fault" and "Lower count threshold of raised fault" to "0", the accumula ted number of blink times for the alarm is counted but not reported. 2. If "Lower count threshold of raised fault" is not 0, the value of "Upper count threshold
Equipme nt
BSC6900 V900R011
Equipme nt
BSC6900 V900R011
Equipme nt
BSC6900
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page60of316
150682621.xls.ms_office
Security Level:
CODE
Code
BSC6900
Number of a simple cell broadcast message. You can run "DSP GSMSCB" to query and obtain the information. The value of this parameter cannot be 0. This parameter, "Geography Scope", and "Update" uniquely decide a cell broadcast GBFDmessage. 113602
1~1023
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
COLDSET
Refrigeration Equipment
BSC6900
Whether to start the refrigeration equipment of the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSOUTPUT(Op in another GBFDtional) mode. 111202 Whether to collect offset COL information SYNCINFO(Man by the BTS GBFDdatory) or cell. 118201 Combined loss used to estimate the SET downlink GCELLPWRBAS power during GBFDIC(Optional) assignment 117602 Level of common access control, used for load control, allowing or forbidding the access of SET some users GCELLCCBASI of common C(Optional) access levels This parameter consists of four bits, each of which indicates whether the correspondin g alarm is enabled or not. The bit value 0 indicates that the alarm is enabled, and the bit value 1 indicates that the alarm is disabled. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSFMUABP(O in another ptional) mode. Whether to enable the dry contact alarm. The value of this parameter consists of four bits from left to right, each of which indicating whether the correspondin g alarm is enabled. "0" indicates that the alarm is enabled, and "1" indicates that the alarm is disabled. The DTCU board supports four routes of Boolean alarms: NO1_DISAB LE, NO2_DISAB SET LE, BTSDHEUBP(Op NO3_DISAB tional) LE, and This parameter consists of four bits. Each bit determines whether the one-way Boolean alarm is triggered by low level or high level. "0" indicates that the alarm is triggered by high level, and "1" indicates that the alarm is triggered by low level. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSFMUABP(O in another ptional) mode. SET Complicacy PWDPOLICY(O of the ptional) password SET BTS BTSBWPARA(O compress ptional) rate.
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
COLTYPE
Collection Type
BSC6900
SoftSynchronized Network
Enumeration Type
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
BSC6900
0~100, step:0.1
dB
None
None
Cell
Not involved
Not involved
None
Equipme nt
COMMACC
BSC6900
GBFD111003
L0_FORBID, L1_FORBID, L2_FORBID, L3_FORBID, L4_FORBID, L5_FORBID, L6_FORBID, L7_FORBID, L8_FORBID, L9_FORBID
L0_FORBID, L1_FORBID, L2_FORBID, L3_FORBID, L4_FORBID, L5_FORBID, L6_FORBID, L7_FORBID, L8_FORBID, L9_FORBID
None None
None
Cell
None
Not involved
Not involved
None
This parameter can be used to limit the user access type to control the network load; however, some users may be The parameter modification adversely affected. Therefore, it is has no impact on the recommended that this parameter be equipment. disabled.
Radio
COMMONS WITCH
BSC6900
MRFD210304
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
COMMONS WITCHER
BSC6900
GBFD111202
O&M of BTS
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
COMMONS WITCHERLE Preserved Alarm VEL Valid Level CFG Password Complicacy
BSC6900
Complicacy
BSC6900
None None
None
BTS
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
COMPRS
COMPRS
BSC6900
O&M of BTS
1~100
None
100 None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
BSC6900 V900R011
Radio
COMSC
Co-MSC
BSC6900
Whether the BSC that controls the external cell and the local GBFDBSC belong 110601 to the same GBFDMSC 510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
CONBSCBT SIDTYPE
CONGCLRT HD0
BSC6900
Index type of ADD the BTS BTSABISHDLCP connect to GBFDATH(Mandatory) BSC 111202 If the duration for buffering the data in queue 0 is less than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery ADD threshold for PORTFLOWCT congestion in RLPARA(Option the CBR al) queue. None
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
Not involved
Not involved
Equipme nt
None
10~150
ms
15 IP:15; ATM:20
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
6/9/2013
Page61of316
150682621.xls.ms_office
Security Level:
CONGCLRT HD1
BSC6900
CONGCLRT HD2
BSC6900
CONGCLRT HD3
BSC6900
CONGCLRT HD4
BSC6900
CONGCLRT HD5
BSC6900
CONGTHD0
CONGTHD1
CONGTHD2
CONGTHD3
CONGTHD4
CONGTHD5
If the duration for buffering the data in queue 1 is less than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for congestion in the RTVBR queue. If the duration for buffering the data in queue 2 is less than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for congestion in the NRTVBR queue. If the duration for buffering the data in queue 3 is less than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for congestion in the UBR queue. If the duration for buffering the data in queue 4 is less than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for congestion in the UBR+ queue. If the duration for buffering the data in queue 5 is less than or equals to the value of this parameter, flow control is canceled. If the duration for buffering the data in queue 0 is more than or equals to the value of this parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for congestion in the CBR queue. If the duration for buffering the data in queue 1 is more than or equals to the value of this parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for congestion in the RTVBR queue. If the duration for buffering the data in queue 2 is more than or equals to the value of this parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for congestion in the NRTVBR queue. If the duration for buffering the data in queue 3 is more than or equals to or equals to the value of this parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for congestion in the UBR queue. If the duration for buffering the data in queue 4 is more than or equals to the value of this parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for congestion in the UBR+ queue. If the duration for buffering the data in queue 5 is more than or equals to the value of this parameter, flow control is triggered.
None
None
10~150
ms
15 IP:15; ATM:20
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
None
None
10~150
ms
15 IP:15; ATM:20
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
None
None
10~150
ms
15 IP:15; ATM:25
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
None
None
10~150
ms
25
BSC69 25 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
None
None
10~150
ms
25
BSC69 25 00 None
Not involved
Not involved
Transpor t
None
None
10~150
ms
25 IP:25; ATM:30
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
None
None
10~150
ms
25 IP:25; ATM:30
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
None
None
10~150
ms
25 IP:25; ATM:30
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
None
None
10~150
ms
25 IP:25; ATM:50
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
None
None
10~150
ms
50
BSC69 50 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
None
None
10~150
ms
50
BSC69 50 00 None
Not involved
Not involved
Transpor t
6/9/2013
Page62of316
150682621.xls.ms_office
Security Level:
CONHOEN
BSC6900
Whether to enable the concentric cell handover algorithm. The concentric cell handover helps to achieve wide coverage in the underlaid subcell and aggressive frequency reuse in the overlaid subcell and to improve the system capacity and conversation quality. The concentric cell handover can be classified into two types: handover from the underlaid subcell to the overlaid subcell and
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
CONNECTP ORTNO
BSC6900
Number of the port for the object that connects MRFDto the DXX 210206
Tree Topology
0~335
None None
None
BSC69 00 None
BTS
None
Radio
CONNECTT YPE
Connect Type
BSC6900
Mode of the connection ADD between the GCBSADDR(Ma BSC and the GBFDndatory) CBC 113601 Whether to connect the ADD power SUBRACK(Optio monitoring nal) board Type of the connection between the NE and EMS or LMT. The connection can be a plain connection or SET SSL CONNTYPE(Ma encryption ndatory) connection. Whether the Iur-g common connection is established between the BSC and a co-BSC6900 ADD RNC or an GIURGCONN(M external andatory) RNC. Minimum interval between the two consecutive handover decisions of an MS. The BSC cannot make a handover decision during the minimum interval. To avoid frequent handover events in the cell, the BSC starts a timer after delivering a handover command to an MS. The BSC allows the MS to make a second handover SET decision only GCELLHOCTRL after the (Optional) timer expires.
XPU, IP_INT
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
CONNPWR
BSC6900
MRFD210301
Configuration Management
Enumeration Type
NO(NO), YES(YES)
NO, YES
None NO
NO
None
None
Not involved
Not involved
None
Equipme nt
CONNTYPE
Connection Type
BSC6900
GBFD111203 MRFD210305
Enumeration Type
None None
None
RNC
None
Not involved
Not involved
None
Transpor t
CONNTYPE
Connection Type
BSC6900
MRFD211402
Enumeration Type
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
CONTHOMI NINTV
BSC6900
GBFD110601 GBFD510501
0~60
None
4 Cell
None
Not involved
Not involved
None
If this parameter is set to a smaller value, handovers may be performed frequently; The parameter modification if this parameter is set to a greater value, has no impact on the handovers may not be performed in time Versions earlier than equipment. and call drops may occur. BSC6900 V900R011
Radio
CONTINTV
BSC6900
The twice intra-cell handover events during this interval are considered GBFDSET consecutive 110601 GCELLHOAD(O handover GBFDptional) events. 510501 Whether to perform the PING operation continuously. When the continuous PING operation is performed, the system sends the PING packets to the specified IP address. You can stop the PING operation by using CTRL + Q. None
1~200
None
6 Cell
This parameter, together with "BANTIME", limits the handover frequency Read & in the cell. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, handovers may be performed frequently; The parameter modification if this parameter is set to a greater value, has no impact on the handovers may not be performed in time Versions earlier than equipment. and call drops may occur. BSC6900 V900R011
Radio
CONTPING
BSC6900
PING IP(Optional)
None
Enumeration Type
NO(NO), YES(YES)
NO, YES
None NO
NO
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
Count
BSC6900
PING MAC(Optional) PING BTSCFM(Option Transmitted al) packets CPU usage threshold for call paging control. When the average CPU usage of sliding windows reaches or exceeds the threshold, call paging flow control is triggered. This parameter is valid only SET when "Board FCCPUTHD(Opti Class" is onal) "XPU". CPU usage threshold for recovery from call paging control. When the average CPU usage of smooth windows is lower than the threshold, call paging flow control is stopped. This parameter is SET valid only FCCPUTHD(Opti when "Board onal) Class" is
None
None
1~28
None
Not involved
Not involved
Not involved
None
Transpor t
CPAGECTH D
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
90 Board
None
Not involved
Not involved
None
Equipme nt
CPAGERTH D
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
80 Board
None
Not involved
Not involved
None
Equipme nt
CPS
BSC6900
CPUN
CPU NO
BSC6900
Whether to allow the BSC to switch off the power amplifier of the TRX SET dynamically GTRXDEV(Optio according to GBFDnal) the traffic 111602 ADD GCBSADDR(Ma CPU number MRFDndatory) on a board 210301
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
TRX
This parameter is valid only when "BSCDynSwitchTrxPAAll ow" in "SET BSCDSTPA" and "DYNOpenTrxPower" in "SET GCELLBASICPARA" are Read & set to YES. Write Read & Write
Not involved
Not involved
0~7
None None
None
BSC69 00 None
Not involved
Not involved
This paramete r cannot be set to YES for the TRX that carries The parameter modification the main has no impact on the BCCH. equipment. None The parameter modification has no impact on the None equipment. None This paramete r is not supporte d by the BTS3001 C and The parameter modification BTS3001 has no impact on the CP. equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
CRC4CHK
BSC6900
Whether to enable to the SET BTS to BTSCRC4(Mand support GBFDatory) CRC4 check 111202
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
Equipme nt
6/9/2013
Page63of316
150682621.xls.ms_office
Security Level:
CRH
BSC6900
Cell reselection hysteresis. This is one of the parameters used for deciding whether to reselect cells in different location areas. This parameter can avoid the increase of network signaling traffic due to frequent location update and reduce the SET risk of losing GCELLIDLEBAS paging GBFDIC(Optional) messages. 110402 Name of the SET certificate CERTFILE(Mand revocation atory) list file Whether to enable the certificate revocation list DISABLE: indicating that the certificate revocation list is disabled ENABLE: indicating SET that the CERTFILE(Optio certificate nal) revocation
Enumeration Type
0dB, 2dB, 4dB, 0dB, 2dB, 4dB, 6dB, 6dB, 8dB, 10dB, 8dB, 10dB, 12dB, 12dB, 14dB 14dB dB
None
6dB
Cell
None
Not involved
Not involved
None
The MS cannot respond to the paging during the location update, thus decreasing the call completion rate in the system. If this parameter is set to a smaller value, pingpong location update may occur, thus increasing the signaling load on the SDCCH. If this parameter is set to a greater value, The parameter modification the MS may not camp on an optimum cell has no impact on the for a long time after entering a new Versions earlier than equipment. location area. BSC6900 V900R011 The parameter modification has no impact on the equipment. None
Radio
CRL
BSC6900
MRFD210305
Security Management
String Type
None
0~200 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
MRFD210305
Security Management Public Voice Group Call Service Public Voice Broadcast Service Public Voice Group Call Service Public Voice Broadcast Service
Enumeration Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
Time interval for the BTS resending a GBFDSET channel 510301 GCELLGSMR(O release GBFDptional) message 510302 Number of times of the BTS resending a SET channel GCELLGSMR(O release ptional) message Cell reselection offset (CRO), indicating a correction of the C2. Proper setting of this parameter can reduce the number of handover times, helpful for assigning an MS to a better cell. In a special case that the PT is 31, the larger the CRO value is, the lower the possibility of handing over an MS to the cell. Generally, do not set the CRO to a value larger SET than 25 dB. GCELLIDLEBAS The CRO IC(Optional) with a too Threshold of the time for crosstalk detection. Within the threshold, if the call flag continuously appearing in the code stream is different from the one saved in a transcoder (TC) or a BTS, the TC or the BTS considers that a crosstalk occurs and sends a message to the BSC. Upon receiving such a message, the BSC host board SET records in a BSCBASIC(Opti log the onal) information
1~255, step: 10
ms
None
10 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD510301 GBFD510302
1~255
None None
3 Cell
None
Not involved
Not involved
None
Radio
CRO
GBFD110402
0~63, step: 2
dB
None
0 Cell
None
Not involved
Not involved
The settings of RXLEVACCESSMIN and CRO should guarante e that cells with same priority have the same cell The parameter modification reselect has no impact on the offset. equipment. None
Radio
CROCALTM THRD
BSC6900
GBFD111203
O&M of BSC
1~255
None None
None
BSC69 00 None
Not involved
Not involved
None The paramete r is related to practical networkin g. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Equipme nt
BSC6900
The field indicates whether the ADD crossSCTPLNK(Optio connect path nal) is available. None
None
Enumeration Type
SCTP link
None
Not involved
Not involved
Transpor t
CSCONVDL
BSC6900
WCDMA R99 CS conversation ADD al service TRMFACTOR(O downlink ptional) factor None
None
0~100
per cent
100
Not involved
Not involved
Transpor t
BSC6900
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. When the interface type is Iu-CS, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR or IUCS, Read & 00 this parameter is valid. Write
Not involved
Not involved
Transpor t
6/9/2013
Page64of316
150682621.xls.ms_office
Security Level:
CSCONVSE CPATH
BSC6900
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-CS, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
CSCONVUL
BSC6900
WCDMA R99 CS ADD conversation TRMFACTOR(O al service ptional) uplink factor None
None
0~100
per cent
100
Not involved
Not involved
CSDATADL
BSC6900
None
None
0~100
per cent
100
Not involved
Not involved
BSC6900
None
Enumeration Type
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
None None
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to A or ABIS, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
None
None
0~7
None None
When the interface type is Abis and When the value of "ITFT" transmission type is in "ADD TRMMAP" is set HDLC, the parameter BSC69 to ABIS, this parameter Read & is 0. 00 is valid. Write
Not involved
Not involved
CSDATAUL
BSC6900
None
None
0~100
per cent
100
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
6/9/2013
Page65of316
150682621.xls.ms_office
Security Level:
CSDSP
BSC6900
0~7
None
5 Cell
None
Not involved
Not involved
CSSTRMDL
BSC6900
WCDMA R99 CS streaming ADD service TRMFACTOR(O downlink ptional) factor None
None
0~100
per cent
100
Not involved
Not involved
R99 CS streaming ADD service TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. When the interface type is Iu-CS, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR or IUCS, Read & 00 this parameter is valid. Write
Not involved
Not involved
CSSTRMSE CPATH
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-CS, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
CSSTRMUL
BSC6900
WCDMA R99 ADD CS streaming TRMFACTOR(O service uplink ptional) factor None Threshold for starting LAPD link congestion control. This parameter cannot be set too high. If this parameter is set too high, the signaling link may be congested before congestion control is started. The congestion start and end thresholds cannot be set too low. If they are set too low, congestion control may be started SET frequently on GTRXFC(Option the signaling GBFDal) link. 111705
None
0~100
per cent
100
Not involved
Not involved
The larger the value of this paramete r, the higher the proportio n of discarde d message s during congestio n. Therefor e, the priority value of a more important service must be less than that of a less important The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the
Radio
Transpor t
Transpor t
Transpor t
Transpor t
BSC6900
30~100
per cent
None
90 TRX
None
Not involved
Not involved
The setting of this paramete r must be greater than The parameter modification "CENDT has no impact on the HD". equipment.
If the value of this parameter is too high, the congestion control is delayed, which leads to deteriorated performance on the signaling link and certain messages may be lost. If the difference between the values of "CSTARTTHD" and "CENDTHD" is small, the signaling link is unstable and congestion control is performed frequently. In this case, the paging messages may be abandoned.
Equipme nt
6/9/2013
Page66of316
150682621.xls.ms_office
Security Level:
BSC6900
None
0~100
per cent
50
BSC69 50 00 None
Not involved
Not involved
BSC6900
None
None
Enumeration Type
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
None None
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to A or ABIS, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
None
None
0~7
None None
When the interface type is Abis and When the value of "ITFT" transmission type is in "ADD TRMMAP" is set HDLC, the parameter BSC69 to ABIS, this parameter Read & is 0. 00 is valid. Write
Not involved
Not involved
BSC6900
None
0~100
per cent
50
BSC69 50 00 None
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The
Transpor t
Transpor t
Transpor t
Transpor t
CSVSP
BSC6900
CT1
BSC6900
CT2
BSC6900
CT3
BSC6900
CT4E
BSC6900
CT4N
BSC6900
CT5
CT6
BSC6900
Priority of a speech service in the CS domain. The ADD parameter is GCELL(Optional used for BSC GBFD) flow control. 111705 ADD Timer MTP3LNK(Optio alignment nal) ready. None ADD MTP3LNK(Optio Timer not nal) aligned. None ADD MTP3LNK(Optio Timer nal) aligned. None ADD Timer MTP3LNK(Optio emergency nal) proving. None ADD MTP3LNK(Optio Timer normal nal) proving. None ADD MTP3LNK(Optio Timer nal) sending SIB. None ADD MTP3LNK(Optio Timer remote nal) congestion. None Timer excessive delay acknowledge ment. None Timer interval of resending FISU. None
0~7
None
3 Cell MTP3 45000 link MTP3 30000 link MTP3 1300 link MTP3 500 link MTP3 8200 link MTP3 100 link MTP3 5000 link
None
Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write
Not involved
Not involved
None
40000~50000
ms
45000
None
BSC6900
None
5000~150000
ms
30000
None
BSC6900
None
1000~2000
ms
1300
None
BSC6900
None
400~600
ms
500
None
BSC6900
None
7500~9500
ms
8200
None
BSC6900
None
80~120
ms
100
None
BSC6900
None
3000~6000
ms
5000
None
BSC6900
larger the value of this paramete r, the higher the proportio n of discarde d message s during congestio n. Therefor e, the priority value of a more important service must be less than that of a The parameter modification less has no impact on the important equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
None
None
None
None
None
None
None
CT7
BSC6900
CT9
BSC6900
None
500~2000
ms
1500
None
BSC6900
None
None
1~100
ms
100
None
BSC6900
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
CTHD
Critical threshold
BSC6900
Critical threshold of CPU usage. When the CPU usage in "Fast judgement window" reaches or exceeds the threshold, all active flow control functions are implemented. Otherwise, the correspondin SET g flow control FCCPUTHD(Opti mechanism is WRFDonal) used. 040100
Flow Control
30~100
per cent
None
95 Board
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page67of316
150682621.xls.ms_office
Security Level:
CTHD CTRBSCDP C
Critical threshold
BSC6900
BSC6900
Critical threshold of packet queue usage. When the packet queue usage reaches or exceeds the threshold, all active flow SET control FCMSGQTHD(O functions are WRFDptional) implemented. 040100 ADD AISSCFG(Mand DPC of the GBFDatory) control BSC. 118201 Format of the control acknowledge message of the MS. Four access bursts are used to obtain timing advance without sending polling message; RLC/MAC control block is used to obtain timing advance SET after sending GCELLPSBASE( polling GBFDOptional) message. 114101 SET BTSLOADCTRL( Mandatory) Control Flag
30~100
per cent
None
85 Board
None
Not involved
Not involved
None
1~16777215
None None
None
BSC69 00 None
Not involved
Not involved
None.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt Equipme nt
BSC6900 V900R011
GPRS
Enumeration Type
4BURST(4Burst), RLC/MAC(RLC/ MAC) 4BURST, RLC/MAC None None NO(Cancel Control Flag), YES(Set Control Flag) YES, NO
4BURST
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
CTRLFLAG
Control Flag
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
None None
None
None
None The value range of this parameter varies with BTS type. Different types of BTSs support a different number of cabinets.
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
CTRLPORT CN
BSC6900
Number of the cabinet ADD which BTSRETANT(Ma controls RET MRFDndatory) antenna. 210602 ControlPort No. of RET antenna. The number of RET antenna which connect to same feed tributary cannot more than 6.For GATM boards, the valid value ranges from 0 to 5. For RXU boards, ADD the valid BTSRETANT(Ma value ranges ndatory) from 0 to 2. Number of the slot where the board controlling the RET antenna is located. For SRAN BTSs, the valid value ranges from 0 to 5. For nonSRAN BTSs, ADD the valid BTSRETANT(Ma value ranges ndatory) from 0 to 23.
0~62
None None
None
BTS
Not involved
Not involved
None
Equipme nt
BSC6900
MRFD210602
0~5
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
MRFD210602
0~23
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Number of the subrack ADD where the BTSRETANT(Ma BTS board is MRFDndatory) located 210602 Slot No. of the MPU for the centralized ADD management RSCGRP(Manda of the tory) resources None
0~254
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
CTRLSLOT
Slot No.
BSC6900
None
0,2,4,8,10,12,14, 0, 2, 4, 8, 10, 12, 16,18,20,22,24,2 14, 16, 18, 20, 22, Interval Type 6 24, 26
None None
None
Not involved
Not involved
Not involved
None
Transpor t
CTRLSN
CTRL SN
BSC6900
Number of the BSC slot where the SET XPU of the BTSCTRL(Mand control plane GBFDatory) is located 111202
O&M of BTS
0~255
None None
None
BTS
None
BTS
If this paramete r of an activated BTS is modified, the entire BTS The BTS should be reset to chain is validate the parameter reset. modification. None If this paramete r of an activated BTS is modified, the entire BTS The BTS should be reset to chain is validate the parameter reset. modification. None
Radio
CTRLSRN
CTRL SRN
BSC6900
CTRLSW
Number of the BSC subrack where the SET XPU of the BTSCTRL(Mand control plane atory) is located Configuration rollback control switch that is used to specify whether to support the SET configuration CMCTRLSW(Ma rollback ndatory) function.
GBFD111202
O&M of BTS
0~255
None None
None
BTS
None
BTS
Radio
MRFD210301
Configuration Management
Enumeration Type
ON, OFF
ON, OFF
None None
ON
BSC69 00 None
Not involved
Not involved
Not involved
BSC6900
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
MSC
None
Not involved
Not involved
The parameter modification has no impact on the None equipment. None The setting of this paramete r needs negotiati on with the opposite network element MSC. In this way, the MSC can process HO RQD message The parameter modification s has no impact on the correctly. equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
Radio
CVer
C-Version No.
BSC6900
BSC6900
BSC6900
C-version number of the BTS software Number of measurement reports sampled for averaging the signal quality on a speech/data channel. Averaging the signal quality in multiple measurement reports helps to avoid a sharp signal quality drop due to Rayleigh fading and to ensure the comprehensi SET veness of a GCELLHOFITPE handover N(Optional) decision. Number of measurement reports sampled for averaging the signal strength on a speech/data channel. Averaging the signal strength in multiple measurement reports helps to avoid a sharp signal level drop due to Rayleigh fading and to ensure the comprehensi SET veness of a GCELLHOFITPE handover N(Optional) decision.
GBFD111202
O&M of BTS
0~99
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GBFD110601 GBFD510501
ms
None
6 Cell
None
Not involved
Not involved
None
Radio
GBFD110601 GBFD510501
ms
None
6 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page68of316
150682621.xls.ms_office
Security Level:
BSC6900
Data service supported by the BSC. You can set this parameter according to SET actual GCELLOTHEXT( requirements GBFDOptional) . 110204 Whether to limit the operation date of the operator GBFD111203 MRFD210305 GBFD111203
NT14_5K~0 NT12K~1 NT6K~2 T14_4K~3 T9_6K~4 T4_8K~5 T2_4K~6 T1_2K~7 T600_BITS~8 T1200_75
NT14_5K, NT12K, NT6K, T14_4K, T9_6K, T4_8K, T2_4K, T1_2K, T600_BITS, T1200_75
None None
None
Cell
None
Not involved
Not involved
None
Radio
DATE DATE
BSC6900 BSC6900
Date Unique number of the date range during which to disable the BSC from shutting down the ADD power BSCDSTPADAT amplifier of a GBFDE(Mandatory) TRX 111602 Date when SET the TMU BTSAUTODLDA board CTINFO(Mandat software is ory) released
No Limit None
RNC RNC
None None
None None
The parameter modification has no impact on the equipment. None Not involved None
Equipme nt Equipme nt
1~12
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
Day
Day
BSC6900
GBFD111202
O&M of BTS
1~31
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
DBD
Dead Band
BSC6900
Temperature error allowed when the temperature control system adjusts the temperature. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDHEUBP(Op in another GBFDtional) mode. 111202
O&M of BTS
0~30
2 BTS If the coverage area in the underlaid subcell is large and tight frequency reuse is used in the overlaid subcell, the recommended value is Inner. If the coverage areas in the overlaid and underlaid subcells are similar and tight frequency reuse is used on the BCCH, the recommended value is Extra. Cell
None
Not involved
Not involved
None
Equipme nt
DBFREQBC CHIUO
BSC6900
Whether the primary BCCH is configured on the inner or extra part of an intelligent ADD underlayGCELL(Mandato overlay (IUO) GBFDry) cell 114501 Index of a same group cell in an ADD enhanced GCELL(Mandato dual band ry) network Name of a same group cell in an ADD enhanced GCELL(Mandato dual band ry) network
Co-BCCH Cell
Enumeration Type
Inner(Inner), Extra(Extra)
Inner, Extra
None None
None
Not involved
Not involved
None
Radio
DBLFREQA DJCID
BSC6900
GBFD114402
0~2047
None None
None
Cell
None
Not involved
Not involved
None
Radio
DBLFREQA DJCNAME
BSC6900
GBFD114402
None
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
DBLFREQA DJIDTYPE
BSC6900
Index type of a same group cell in ADD an enhanced GCELL(Mandato dual band GBFDry) network 114402 DC voltage alarm lower threshold. When the busbar output voltage is lower than the value of this parameter, an alarm indicating the abnormal busbar voltage is reported. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202
None None
None
Cell
None
Not involved
Not involved
None
Radio
DCVLTHD
O&M of BTS
None
If "Power System Type" is "SC48200", the recommended value is "470". For Power System Type, the recommended value is "450".
BTS
The value of this parameter must be greater than "Battery power-off voltage", lower than "DC overvoltage alarm threshold", and at least two volts lower than "Float charging Read & voltage". Write
Not involved
Not involved
None
Equipme nt
BSC6900
The BTS reports an alarm if the DC voltage exceeds the value of this parameter. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another MRFDptional) mode. 210304 The BTS reports an alarm if the DC voltage is lower than the value of this parameter. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another MRFDptional) mode. 210304 DC voltage alarm upper threshold. When the busbar output voltage is higher than the value of this parameter, an alarm indicating the abnormal busbar voltage is reported. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202 debugging subnet No. in a BSC. None This parameter specifies the default preconverted PDCHs in the dynamic transferable GBFDchannel pool. 113101
Faulty Management
None
580 BTS
The value of this parameter must be greater than "DC undervoltage alarm threshold" and at least two volts greater than "Even charging voltage".
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
None
450 BTS
The value of this parameter must be greater than "Battery power-off voltage", lower than "DC overvoltage alarm threshold", and at least three volts lower than "Float charging Read & voltage". Write
Not involved
Not involved
None
Equipme nt
BSC6900
BSC6900
O&M of BTS
None
580 BTS
The value of this parameter must be greater than "DC Voltage Lower Threshold" and at least one volt greater than "Even charging Read & voltage". Write Read & Write
Not involved
Not involved
None
None
1~126, 128~223
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
BSC6900
0~32
None None
0 Cell
None
Cell
None
BSC6900 V900R011
Radio
6/9/2013
Page69of316
150682621.xls.ms_office
Security Level:
BSC6900
Timer for delaying a connection release. This parameter is used for delaying the channel deactivation after the active signaling link is broken. The purpose is to reserve some time for the disconnection that may be repeated. After receiving a REL IND message sent by the BTS, the BSC starts the timer. When the timer expires, the BSC SET stops the GCELLTMR(Opt timer and GBFDional) sends the 111004 ADD M3DE(Mandator y) ADD M3RT(Mandator y) Destination ADD entity No. of M3LKS(Mandato identifying a ry) unique entity. None Description of the operator account GBFD111203 MRFD210305
500~60000
ms
None
1000 Cell
None
Not involved
Not involved
None
The parameter modification If this timer is set to a greater value, has no impact on the channel resources may be wasted, thus equipment. causing congestion.
Radio
DENO
BSC6900
0~182
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
DESC
Description
BSC6900
ADD OP(Optional)
String Type
None
1~110 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
Whether to start the antitheft equipment of the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSOUTPUT(Op in another GBFDtional) mode. 111202
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
DESTIP
Destination IP address
BSC6900
PING IP(Mandatory)
Destination IP address
None
None
IP Address Type
None
None
Not involved
Not involved
When running this comman d, the source IP address and the destinatio n IP address cannot be the local IP address and the peer IP address configure The parameter modification d for the has no impact on the IPPATH. equipment. None The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
Transpor t
DESTIP
Destination IP address
BSC6900
None
None
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
DESTIP
Destination IP address
BSC6900
DESTMEPID RMEP ID
BSC6900
ADD IPRTBIND(Mand atory) PING MAC(Mandatory ) TRC MAC(Mandatory ) PING BTSCFM(Manda tory) TRC BTSCFM(Manda
Destination IP address
None
None
IP Address Type
None
None
None
None
Not involved
Not involved
Not involved
None
Transpor t
DESTNODE
BSC6900
Identifies a maintenance point in the maintenance group None Type of the ADD object the BTSAUTOPLAN( BTS is GBFDMandatory) connected to 510701
1~400
None None
None
Not involved
Not involved
Not involved
None
Transpor t
Enumeration Type
BSC, BTS
BSC, BTS
None None
None
BTS
None
BTS
None
BSC6900 V900R011
Equipme nt
DESTNODE
BSC6900
Type of the object the BTS is connected to. Value range: BTS, BSC, GBFDand DXX 111202
O&M of BTS
Enumeration Type
None None
None
BTS
None
BTS
This paramete r can be modified only when the BTS is The BTS should be reset to deactivat validate the parameter ed. modification. None
Equipme nt
DESTSN
BSC6900
Slot No. of the subsystem where the Iurg common connection is established ADD to the coGIURGCONN(M BSC6900 MRFDandatory) RNC 211402 Subrack No. of the subsystem where the Iurg common connection is established ADD to the coGIURGCONN(M BSC6900 MRFDandatory) RNC 211402 No. of the subsystem where the Iurg common connection is established ADD to the coGIURGCONN(M BSC6900 MRFDandatory) RNC 211402 ID of the TRX that MOV carries the BCCH(Mandator destination y) main BCCH
{0~27}
None None
None
BSC
Not involved
Not involved
None
BSC6900 V900R011
Radio
DESTSRN
BSC6900
{0~11}
None None
None
BSC
Not involved
Not involved
None
BSC6900 V900R011
Radio
DESTSSN
BSC6900
{0~7}
None None
None
BSC
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
MRFD210301
Configuration Management
0~3071
None None
None
Cell
None
Cell
None
Radio
BSC6900
DETECTSWI Switch for Abis TCH Timeslot Detection BSC6900 DEVICENAM E Deviced Name
BSC6900
Maximum number of periods in which the local end does not receive BFD packets from the peer end. If the number of periods in which the local end does not receive BFD packets from the peer end reaches this parameter, the BTS ADD reports a BTSBFD(Option BFD session GBFDal) fail. 118609 SET Switch for BTSABISTROP( Abis Timeslot Mandatory) Detection None ADD BTSRETANT(Ma Name of the MRFDndatory) RET antenna 210602
3~10
None
Not involved
Not involved
None
OFF, ON
None None
OFF
Not involved
Not involved
Not involved
None
String Type
None
0~50 characters
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
DEVICENO
Device No.
BSC6900
ADD Number of BTSRETANT(Ma the RET ndatory) antenna. ADD PPPLNK(Mandat ory) ADD Borrowed MPGRP(Mandat device IP ory) address.
MRFD210602
0~35
None None
None
BTS
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
Not involved
Equipme nt
DEVIP
BSC6900
GBFD118611 GBFD118622
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
DEVTYPE
ADD Device IP DEVIP(Mandator Address y) Type ADD GEXT3GCELL( Optional) SET GCELLHOFDDB A2(Mandatory) Downlink SET frequency of GCELLHOTDDB the external A2(Mandatory) 3G cell
None
None
Enumeration Type
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
DF
DL UARFCN
BSC6900
GBFD114301 GBFD114302
0~16383
None None
None
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page70of316
150682621.xls.ms_office
Security Level:
DFCBSN
DFCB Board SN
BSC6900
Number of the slot SET where the BTSDFCUBP(Op DFCB is tional) installed
GBFD111202
O&M of BTS
0~23
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
DFCBSRN
BSC6900
DFDPC
Default DPC
BSC6900
Number of the subrack SET where the BTSDFCUBP(Op DFCB is GBFDtional) installed 111202 Default destination signaling point code (DPC). YES: When the MSC Pool function is not enabled, all the calls connected to this BSC can access only the MSC identified by this DPC. NO: When the MSC Pool function is not enabled, all the calls under this BSC are not connected on the MSC identified by this DPC. If the MSC Pool function ADD is enabled, GCNNODE(Opti this GBFDonal) parameter is 117401 Whether to use the customized port DEFAULTPO RT: indicating that the FTP server uses the default port 21 as a command port and port 20 as a data port to provide FTP services CUSTOMPO RT: indicating that the FTP server uses the customized GBFDSET port to 111203 FTPSSRV(Mand provide FTP MRFDatory) services 210305 This parameter indicates the IP Address ADD of DHCP DHCPRLY(Mand Relay atory) Gateway.
O&M of BTS
0~254
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
MSC Pool
Enumeration Type
NO, YES
None NO
NO
MSC
None
Not involved
Not involved
None
Equipme nt
DFTPORTS WT
Enumeration Type
None None
DEFAULTPORT
RNC
None
Not involved
Not involved
None
Equipme nt
DHCPRLYG ATEWAYIP
BSC6900
None
None
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
BSC6900
ADD DHCPRLY(Mand DHCP Relay atory) ID. None Whether to SET enable the BTSDPMUBP(O diesel engine GBFDptional) save switch 111202 Whether to allow an MS to report the classmark and whether to hand over the MS from the SDCCH in the frequency band for the main BCCH to the SDCCH in a different frequency band SET according to GCELLCHMGBA the SIC(Optional) classmark
None
O&M of BTS
Interval Type 0~63 0~63 None None DISABLE(DISAB LE), Enumeration ENABLE(ENABL Type E) DISABLE, ENABLE None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD110608 GBFD111005
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
This paramete r takes effect only when the SDCCH exists on the TRXs on different The parameter modification frequenc has no impact on the y bands. equipment.
If this function is enabled, number of signaling channel handovers is increased and the access speed is decreased, but the congestion on the BCCH-compatible SDCCH can be relieved and the access success rate is enhanced.
Radio
DINM
Date in Month
BSC6900
Day in the month on which the ADD command SUBTSK(Mandat can be ory) executed.
GBFD111203
O&M of BSC
Enumeration Type
MON_1(No.1), MON_2(No.2), MON_3(No.3), MON_4(No.4), MON_5(No.5), MON_6(No.6), MON_7(No.7), MON_8(No.8), MON_9(No.9), MON_10(No.10), MON_11(No.11), MON_12(No.12), MON_13(No.13), MON_14(No.14), MON_15(No.15), MON_16(No.16), MON_17(No.17), MON_18(No.18), MON_19(No.19), MON_20(No.20), MON_21(No.21), MON_22(No.22), MON_23(No.23), MON_24(No.24), MON_25(No.25), MON_26(No.26), MON_27(No.27), MON_28(No.28), MON_29(No.29), MON_30(No.30), MON_31(No.31) MON_1~MON_31 SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesda y), THU(Thursday), SUN, MON, TUE, FRI(Friday), WED, THU, FRI, SAT(Saturday) SAT
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
DINW
Date in Week
BSC6900
Day in the week on which the ADD command SUBTSK(Mandat can be ory) executed. DLD LICENSE(Manda tory) ULD LICENSE(Manda tory) DLD BTSSW(Optional ) DLD RETANTCFG(O ptional) DLD BTSPATCH(Opti onal) ULD BTSLOG(Option al)
GBFD111203
O&M of BSC
Enumeration Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
DIR
Directory
BSC6900
Path of the FTP server GBFDwhere the file 111203 to be loaded MRFDis stored 210403
String Type
None
1~128 charaters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
DIR
File Directory
BSC6900
GBFD111202
O&M of BTS
String Type
None
1~256 characters
None None
None
None
None
Not involved
Not involved
BSC6900
Whether the BSC sends an Assignment Fail message with the cause value of directed retry to the MSC before the BSC SET initiates a AITFOTHPARA( directed retry GBFDOptional) procedure 110607
Direct Retry
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
MSC
None
Not involved
Not involved
None The setting of this paramete r needs negotiati on with the MSC of the opposite network element. If the MSC supports processin g assignme nt failure message s containin g the cause value of direct retry, set this paramete r to YES; otherwis e, set this paramete
BSC6900 V900R011
Equipme nt
Equipme nt
6/9/2013
Page71of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
BSC6900
Whether to enable the directed retry. The directed retry is to hand over an MS to a neighboring cell in the same procedure as the handover.The directed retry is an emergency measure applicable to abnormal traffic peaks in some areas of a radio network. You should not use the directed retry as a major means of solving traffic SET congestion. If GCELLBASICPA the directed RA(Optional) retry always Whether a cell is a repeater. With simpler functions than a BTS, a repeater is a coverage extension device of a BTS. It is applied to widelystretched areas or indoor areas to solve the dead zone problem of BTS coverage. Using repeaters cannot increase the traffic capacity of a network but improve the coverage only. SET Because the GCELLSOFT(O BTS ptional) coverage Timer to control the duration in which the BSC prevents the handover of an MS from which the BSC receives the Disconnect message. If the MS is handed over to a new cell after the MS sends the Disconnect message, the MS cannot receive the Release Acknowledge ment message from the original cell. Thus, the MS cannot be disconnected SET . To protect OTHSOFTPARA from such a (Optional) disconnection ADD GEXT3GCELL( Optional) SET GCELLHOFDDB A2(Mandatory) SET GCELLHOTDDB A2(Mandatory)
GBFD110607
Direct Retry
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
GBFD110601
HUAWEI I Handover
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
If the value of this paramete r is YES, the intraBSC handover s (including intra-cell handover s) in which the cell is the source or destinatio n cell are processe d as asynchro nous The parameter modification handover has no impact on the s. equipment. None
Equipme nt
GBFD110601 GBFD510501
0~15
None
BSC69 3 00 None
Not involved
Not involved
If this paramete r is set to 15, this protectio The parameter modification n is has no impact on the disabled. equipment. None
Radio
DIVERSITY
Diversity
BSC6900
GBFD114301
GSM/WCDMA Interoperability
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
DIVERT16Q AMDELAY
BSC6900
Diversity transmitter 16QAM delay. Only the doubletransceiver BTS and the subsequent distributed BTS support the function of transmit diversity delay. Therefore, this parameter applies to only the BTS of these two types. For the BTS of other types, this parameter is SET set to an GCELLBASICPA invalid value GBFDRA(Optional) 255. 510804 Diversity transmitter 32QAM delay. Only the doubletransceiver BTS and the subsequent distributed BTS support the function of transmit diversity delay. Therefore, this parameter applies to only the BTS of these two types. For the BTS of other types, this parameter is SET set to an GCELLBASICPA invalid value GBFDRA(Optional) 255. 510804 Time delay of the transmit diversity. Currently, the parameter is set to 2 bit (7.4 us), applicable to general fading environments . A transmit diversity can generally obtain the gain of 3 dB to 5 dB. Because the fading conditions vary with the environment where an MS lies, however, MSs in a fixed time delay obtain different gains, which may have SET negative GCELLBASICPA effects on GBFDRA(Optional) some codes 510804 Whether to support transmitting SET diversity or BTSRXUBP(Opti four diversity GBFDonal) receiving 115902
Downlink EGPRS2-A
bit
None
8 Cell
None
Not involved
Not involved
This paramete r applies to only the doubletransceiv er BTS and the correspo nding The parameter modification distribute has no impact on the d BTS. equipment. None
BSC6900 V900R011
Equipme nt
DIVERT32Q AMDELAY
BSC6900
Downlink EGPRS2-A
bit
None
8 Cell
None
Not involved
Not involved
This paramete r applies to only the doubletransceiv er BTS and the correspo nding The parameter modification distribute has no impact on the d BTS. equipment. None
BSC6900 V900R011
Equipme nt
DIVERT8PS KDELAY
BSC6900
Downlink EGPRS2-A
bit
None
8 Cell
None
Not involved
Not involved
None
Equipme nt
DivSwitch
BSC6900
Transmit Diversity
Enumeration Type
N0(No), YES(Yes)
NO, YES
None NO
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page72of316
150682621.xls.ms_office
Security Level:
DLADJPRD
PwrCtrlDLAdjPerio d BSC6900
BSC6900
Minimum interval between two consecutive downlink SET power GCELLPWR3(O control ptional) commands If the downlink receive quality level of an AMR full rate call is greater than this parameter, the call needs to undergo Huawei SET power GCELLPWR3(O control ptional) generation If the downlink receive quality level of an AMR full rate call is smaller than this parameter, the call needs to undergo Huawei SET power GCELLPWR3(O control ptional) generation If the downlink receive quality level of an AMR half rate call is greater than this parameter, the call needs to undergo Huawei SET power GCELLPWR3(O control ptional) generation If the downlink receive quality level of an AMR half rate call is smaller than this parameter, the call needs to undergo Huawei SET power GCELLPWR3(O control ptional) generation
GBFD117601
ms
None
2 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
GBFD117601
1~30
dB
None
16 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLAFSREXQUALHIGH THRED" >= "DLAFSREXQUALLOWT Read & HRED". Write
Not involved
Not involved
None
Radio
GBFD117601
1~30
dB
None
12 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLAFSREXQUALHIGH THRED" >= "DLAFSREXQUALLOWT Read & HRED". Write
Not involved
Not involved
None
Radio
GBFD117601
1~30
dB
None
16 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLAHSREXQUALHIGH THRED" >= "DLAFSREXQUALLOWT Read & HRED". Write
Not involved
Not involved
None
Radio
GBFD117601
1~30
dB
None
12 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLAHSREXQUALHIGH THRED" >= "DLAFSREXQUALLOWT Read & HRED". Write
Not involved
Not involved
DLCI
BSC6900
ID of the data link connection of the NSVC. It is an interworking parameter which must ADD be consistent NSVC(Mandator on the BSC GBFDy) and the peer. 510002 If the ratio of downlink flow to uplink flow is greater than or equal to the value of this parameter during the fast flux measurement , the downlink SET services BSCPSSOFTPA takes GBFDRA(Optional) priority. 119501 SET Whether the GCELLGPRS(O cell supports ptional) DLDC. Threshold for downlink edge handover. If the downlink receive level remains less than this threshold for a period of time, the edge handover is triggered. If the PBGT handover algorithm is enabled, this threshold can be decreased accordingly. If the PBGT handover algorithm is disabled, overcoverage, cochannel interference, and adjacent SET channel GCELLHOBASI interference C(Optional) may occur Filter adjustment factor for downlink power control. Setting this parameter high helps to smooth the filtered values and to reduce the impact of poor measurement reports on the filtered values. Setting this parameter low helps to draw the filtered values close to the actual values and to heighten the SET power GCELLPWR3(O control ptional) effect. Upper quality threshold for Huawei power control generation III on a full rate call. If the downlink receive quality level of a full rate call is greater than this threshold, the call needs to undergo SET Huawei GCELLPWR3(O power ptional) control Lower quality threshold for Huawei power control generation III on a full rate call. If the downlink receive quality level of a full rate call is smaller than this threshold, the call needs to undergo SET Huawei GCELLPWR3(O power ptional) control
Gb Over FR
16~1007
None None
None
NSVC
None
NSVC
DLDCSPT
BSC6900
GBFD510802
Interval Type 1~255 1~255 UNSUPPORT(No t Support), SUPPORT(Supp UNSUPPORT, ort) SUPPORT
None None
5 BSC
None
Not involved
Not involved
None This paramete r is related to the actual physical connectio n of the BC. This paramete r is modified only when the NSVC service is faulty. If this paramete r is set to a small value, the detection of service type is sensitive and may lead to pingpong handover between different
Radio
Equipme nt
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
None None
None
Cell
This parameter is valid only when "EDGE" is set Read & to Support. Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
DLEDGETH RES
GBFD110601 GBFD510501
0~63
dB
None
20 Cell
This parameter is valid when "FRINGEHOEN" is set to YES or "LOADHOEN" is set to Read & YES. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, call drops may occur due to delayed handover; if this parameter is set to a The parameter modification greater value, unnecessary handover may has no impact on the be performed, thus affecting the voice Versions earlier than equipment. quality. BSC6900 V900R011
Radio
BSC6900
GBFD117601
1~10
None None
3 Cell
Not involved
Not involved
None
Radio
GBFD117601
1~30
dB
None
16 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLFSREXQUALHIGHT HRED" >= "DLFSREXQUALLOWTH Read & RED". Write
Not involved
Not involved
None
Radio
GBFD117601
1~30
dB
None
16 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLFSREXQUALHIGHT HRED" >= "DLFSREXQUALLOWTH Read & RED". Write
Not involved
Not involved
None
Radio
6/9/2013
Page73of316
150682621.xls.ms_office
Security Level:
BSC6900
DLHYSTF1
BSC6900
DLHYSTF2
BSC6900
DLHYSTF3
BSC6900
DLHYSTH1
BSC6900
Expanded size of the GPRS RLC window. This parameter is used to expand the size of the GRPS RLC window. The expanded window size breaks the restrictions of 64 defined in the protocol and reduces the probability of GRPS RLC window stopping. Upper quality threshold for Huawei power control generation III on a half rate call. If the downlink receive quality level of a half rate call is greater than this threshold, the call needs to undergo Huawei power control Lower quality threshold for Huawei power control generation III on a half rate call. If the downlink receive quality level of a half rate call is smallter than this threshold, the call needs to undergo Huawei power control Adjustment hysteresis 1 of AMR downlink coding rate (full rate). According to a certain algorithm and the radio quality indication (RQI) in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a Adjustment hysteresis 2 of AMR downlink coding rate (full rate). According to a certain algorithm and the radio quality indication (RQI) in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a Adjustment hysteresis 3 of AMR downlink coding rate (full rate). According to a certain algorithm and the radio quality indication (RQI) in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a Adjustment hysteresis 1 of AMR downlink coding rate (half rate). According to a certain algorithm and the radio quality indication (RQI) in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a
GBFD114101
GPRS
0~127
None None
0 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the The throughput of the GPRS service is equipment. affected.
Radio
GBFD117601
1~30
dB
None
18 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLHSREXQUALHIGHT HRED" >= "DLHSREXQUALLOWTH Read & RED". Write
Not involved
Not involved
None
Radio
GBFD117601
1~30
dB
None
18 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLHSREXQUALHIGHT HRED" >= "DLHSREXQUALLOWTH Read & RED". Write
Not involved
Not involved
None
Radio
GBFD115501
AMR FR
0~15
None None
None
Cell
The setting of this parameter must meet the following condition: "DLTHF1" + "DLHYSTF1" < "DLTHF2" + Read & "DLHYSTF2". Write
Not involved
Not involved
None
Radio
GBFD115501
AMR FR
0~15
None None
None
Cell
The setting of this parameter must meet the following condition: "DLTHF2" + "DLHYSTF2" < "DLTHF3" + Read & "DLHYSTF3". Write
Not involved
Not involved
None
Radio
GBFD115501
AMR FR
0~15
None None
None
Cell
The setting of this parameter must meet the following condition: "DLTHF2" + "DLHYSTF2" < "DLTHF3" + Read & "DLHYSTF3". Write
Not involved
Not involved
None
Radio
GBFD115502
AMR HR
0~15
None None
None
Cell
The setting of this parameter must meet the following condition: "DLTHH1" + "DLHYSTH1" < "DLTHH2" + Read & "DLHYSTH2". Write
Not involved
Not involved
None
Radio
6/9/2013
Page74of316
150682621.xls.ms_office
Security Level:
DLHYSTH2
BSC6900
DLHYSTH3
BSC6900
DLHYSTWB 1
BSC6900
DLHYSTWB 2
BSC6900
Adjustment hysteresis 2 of AMR downlink coding rate (half rate). According to a certain algorithm and the radio quality indication (RQI) in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a Adjustment hysteresis 3 of AMR downlink coding rate (half rate). According to a certain algorithm and the radio quality indication (RQI) in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a Adjustment hysteresis 1 of AMR downlink coding rate (wide band). According to a certain algorithm and the radio quality indication (RQI) in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a Adjustment hysteresis 2 of AMR downlink coding rate (wide band). According to a certain algorithm and the radio quality indication (RQI) in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a
GBFD115502
AMR HR
0~15
None None
None
Cell
The setting of this parameter must meet the following condition: "DLTHH2" + "DLHYSTH2" < "DLTHH3" + Read & "DLHYSTH3". Write
Not involved
Not involved
None
Radio
GBFD115502
AMR HR
0~15
None None
None
Cell
The setting of this parameter must meet the following condition: "DLTHH2" + "DLHYSTH2" < "DLTHH3" + Read & "DLHYSTH3". Write
Not involved
Not involved
None
Radio
GBFD115507
WB AMR
0~15
None None
2 Cell
The setting of this parameter must meet the following condition: "DLTHWB1" + "DLHYSTWB1" < "DLTHWB2" + Read & "DLHYSTWB2". Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
GBFD115507
WB AMR
0~15
None None
2 Cell
The setting of this parameter must meet the following condition: "DLTHWB1" + "DLHYSTWB1" < "DLTHWB2" + Read & "DLHYSTWB2". Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
Threshold for determining whether downlink interference exists. If the downlink level is equal to or greater than "Interf.of DL Level Threshold" and the downlink quality level is equal to or greater than "Interf.of DL Qual.Thresho ld", downlink interference exists. The value range 0 to 63 is mapped to GBFDthe range 110601 110 dBm to - GBFD47 dBm. 510501 Threshold for determining whether downlink interference exists. If the downlink level is equal to or greater than "Interf.of DL Level Threshold" and the downlink quality level is equal to or greater than "Interf.of DL Qual.Thresho ld", downlink interference exists.
0~63
dB
None
35 Cell
None
Not involved
Not involved
None
Radio
DLINTERFQ UALLIMIT
Interf.of DL Qual.Threshold
BSC6900
GBFD110601 GBFD510501
0~70
None None
40 Cell
None
Not involved
Not involved
None
Radio
BSC6900
Threshold of downlink SET Basic GCELLHOINTE Congestion RRATLDB(Optio state in a 2G MRFDnal) Cell 211402
{1~100}
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
6/9/2013
Page75of316
150682621.xls.ms_office
Security Level:
BSC6900
Number of measurement reports sampled for averaging downlink signal strength. A single measurement report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurement reports to SET reflect the GCELLPWR2(O radio GBFDptional) environment. 110703
ms
None
5 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to PWR2 and "DNPCEN" in the "SET GCELLBASICPARA" Read & command is set to YES. Write
Not involved
Not involved
BSC6900
BSC6900
Target value of the voice quality automatically adjusted through the downlink SET threshold of GCELLCCAMR( AMR Optional) handover Maximum step by which to decrease downlink power SET according to GCELLPWR3(O signal ptional) strength Maximum step by which to increase downlink power SET according to GCELLPWR3(O signal ptional) strength
GBFD115506
2~255
None None
The recommended value is 8 when DTX is disabled. The recommended value is 14 when DTX is enabled. Cell
The setting of this parameter must meet the following condition: "LTFERLOWTH" < "DLLTFERTGT" < Read & "LTFERUPTH". Write
Not involved
Not involved
None This paramete r is used for the adaptive adjustme nt function of AMR downlink threshold . When the voice is in poor performa nce not being affected by the channel quality: If the low rate mode is more used in the adaptatio n, you can increase the value of this paramete
Radio
BSC6900 V900R011
Radio
GBFD117601
1~30
dB
None
4 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
DLMAXUPST EP DLMAXUpStep
BSC6900
GBFD117601
1~30
dB
None
8 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
BSC6900
BSC6900
Threshold of downlink SET overload GCELLHOINTE congestion RRATLDB(Optio state in a 2G MRFDnal) Cell 211402 Number of downlink measurement reports that the BSC predicts. The BSC takes a while to confirm the power control effect of a power control command. Thus, the BSC makes a power control decision based on a measurement report that lags behind the changes in the receive level and quality instead of reflecting the real-time radio SET environment. GCELLPWR2(O As a result, GBFDptional) the power 110703 Quality level threshold for decreasing downlink signal power. If the BTS transmits signals at a quality level less than this threshold, the BSC decreases the power of the BTS. If (downlink receive level "MAX Down Adj. PC Value by Qual.") < "DL RX_LEV Lower Threshold", however, the BSC does SET not adjust the GCELLPWRBAS transmit GBFDIC(Optional) power. 110703 Quality level threshold for increasing downlink signal power. If the BTS transmits signals at a quality level greater than this threshold, the BSC increases the power of the BTS. If (downlink receive level + "MAX Up Adj. PC Value by Qual.") > "DL RX_LEV Upper Threshold", however, the BSC does SET not adjust the GCELLPWRBAS transmit GBFDIC(Optional) power. 110703 Number of measurement reports sampled for averaging downlink signal quality. A single measurement report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurement reports to SET reflect the GCELLPWR2(O radio GBFDptional) environment. 110703
{1~100}
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
0~3
None None
0 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to PWR2 and "DNPCEN" in the "SET GCELLBASICPARA" Read & command is set to YES. Write
Not involved
Not involved
None
Radio
BSC6900
0~7
None None
0 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "DLQLOWTHRED" >= Read & "DLQHIGHTHRED". Write
Not involved
Not involved
None
If this parameter is set to a smaller value, downlink power control may not be performed when the voice quality is good, thus causing the power waste and increasing the interference. If this parameter is set to a greater value, The parameter modification downlink power control may be performed has no impact on the when the voice quality is bad, thus Versions earlier than equipment. affecting the voice quality. BSC6900 V900R011
Radio
BSC6900
0~7
None None
2 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "DLQLOWTHRED" >= Read & "DLQHIGHTHRED". Write
Not involved
Not involved
None
If this parameter is set to a greater value, uplink power control may not be performed when the voice quality is bad, thus affecting the voice quality. If this parameter is set to a smaller value, uplink power control may be performed when The parameter modification the voice quality is good, thus causing the has no impact on the power waste and increasing the Versions earlier than equipment. interference. BSC6900 V900R011
Radio
BSC6900
ms
None
5 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to PWR2 and "DNPCEN" in the "SET GCELLBASICPARA" Read & command is set to YES. Write
Not involved
Not involved
None
Radio
6/9/2013
Page76of316
150682621.xls.ms_office
Security Level:
BSC6900
During downlink power control, if the downlink receive quality level is equal to or greater than "DL Qual, bad Trig Threshold", "DL RX_LEV Upper Threshold" is increased by "DL Qual. Bad UpLEVDiff" to further increase the SET expected GCELLPWR2(O downlink GBFDptional) power level. 110703 During downlink power control, if the downlink receive quality level is equal to or greater than "DL Qual, bad Trig Threshold", "DL RX_LEV Upper Threshold" is increased by "DL Qual. Bad UpLEVDiff" to further increase the SET expected GCELLPWR2(O downlink GBFDptional) power level. 110703 Downlink quality threshold for emergency handover. This parameter is represented as the product of 10 and a quality level that ranges from 0 to 7. The emergency handover can be triggered only when the downlink receive quality of an MS is greater(indic ate bad GBFDSET quality) than 110601 GCELLHOEMG( this GBFDOptional) threshold. 510501 Downlink quality limit for emergency handover in an AMR full rate call. The value of this parameter corresponds to the quality levels (0 to 7) multiplied by 10. An emergency handover can be triggered only when the downlink reception quality of an MS is higher than the value of this parameter, SET which GCELLAMRQUL indicates a GBFD(Optional) poor quality. 115501 Downlink quality limit for emergency handover in an AMR half rate call. The value of this parameter corresponds to the quality levels (0 to 7) multiplied by 10. An emergency handover can be triggered only when the downlink reception quality of an MS is higher than the value of this parameter, SET which GCELLAMRQUL indicates a GBFD(Optional) poor quality. 115502 Percentage of signal strength in the factors by which to determine SET the downlink GCELLPWR3(O power ptional) control step
0~7
None None
2 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
BSC6900
0~63
dB
None
10 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
BSC6900
0~70
None None
55 Cell
This parameter is valid only when "BQHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
If this parameter is set to a greater value, handover may not be performed when the downlink voice quality is bad, thus leading to call drops. If this parameter is set to a The parameter modification smaller value, unnecessary handovers has no impact on the may be performed, thus decreasing the Versions earlier than equipment. user experience and network traffic load. BSC6900 V900R011
Radio
BSC6900
AMR FR
0~70
None None
None
Cell
None
Not involved
Not involved
The setting of this paramete r affects the triggering of a handover for poor quality in an AMR full rate call. The smaller the value of this paramete r is, the easier a downlink handover due to a poor The parameter modification quality has no impact on the occurs. equipment.
If this parameter is set to a smaller value, the handovers due to bad downlink quality may increase, thus decreasing the handover success rate. If this parameter is set to a greater value, handovers due to bad downlink quality are less possible to occur, thus increasing the call drop Versions earlier than rate. BSC6900 V900R011
Radio
BSC6900
AMR HR
0~70
None None
None
Cell
None
Not involved
Not involved
The setting of this paramete r affects the triggering of a handover for poor quality in an AMR half rate call. The smaller the value of this paramete r is, the easier a downlink handover due to a poor The parameter modification quality has no impact on the occurs. equipment.
If this parameter is set to a smaller value, the handovers due to bad downlink quality may increase, thus decreasing the handover success rate. If this parameter is set to a greater value, handovers due to bad downlink quality are less possible to occur, thus increasing the call drop Versions earlier than rate. BSC6900 V900R011
Radio
GBFD117601
0~10
None None
6 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
Length of the exponential filter for downlink signal strength. A single measurement report may not reflect the actual network situations accurately. Therefore, the BSC needs to filter the measured values in several successive measurement reports to SET reflect the GCELLPWR3(O radio GBFDptional) environment. 117601 Upper receive level threshold for downlink power control. If the downlink receive level is greater than this threshold, the power of the downlink SET signal needs GCELLPWR3(O to be GBFDptional) decreased. 117601 Lower receive level threshold for downlink power control. If the downlink receive level is smaller than this threshold, the power of the SET uplink signal GCELLPWR3(O needs to be GBFDptional) increased. 117601
ms
None
3 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
0~63
dB
None
35 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLREXLEVHIGHTHRE D" >= "DLREXLEVLOWTHRED Read & ". Write
Not involved
Not involved
None
If this parameter is set to a greater value, decrease power control may not be performed when the downlink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, The parameter modification decrease power control may be has no impact on the performed when the downlink power is Versions earlier than equipment. low, in this way, call drops may occur. BSC6900 V900R011
Radio
0~63
dB
None
25 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLREXLEVHIGHTHRE D" >= "DLREXLEVLOWTHRED Read & ". Write
Not involved
Not involved
None
If this parameter is set to a greater value, increase power control may be performed when the downlink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, increase power control The parameter modification may not be performed when the downlink has no impact on the power is low, in this way, call drops may Versions earlier than equipment. occur. BSC6900 V900R011
Radio
6/9/2013
Page77of316
150682621.xls.ms_office
Security Level:
Length of the slide window filter for downlink signal strength. A single measurement report may not reflect the actual network situations accurately. Therefore, the BSC needs to filter the measured values in several successive measurement reports to SET reflect the GCELLPWR3(O radio ptional) environment. Percentage of quality level in the factors by which to determine SET the downlink GCELLPWR3(O power ptional) control step Length of the exponential filter for downlink signal quality. A single measurement report may not reflect the actual network situations accurately. Therefore, the BSC needs to filter the measured values in several successive measurement reports to reflect the radio environment. Length of the slide window filter for downlink signal quality. A single measurement report may not reflect the actual network situations accurately. Therefore, the BSC needs to filter the measured values in several successive measurement reports to reflect the radio environment. A power control step cannot exceed the step computed according to "III DL RexLev Protect Factor" and "III DL RexQual Protect Factor". A power control step cannot exceed the step computed according to "III DL RexLev Protect Factor" and "III DL RexQual Protect Factor". Upper threshold for downlink signal strength If the downlink received signal level is greater than this threshold, a power decrease is computed. Then, the power is decreased by the least of the power decrease, maximum power adjustment step allowed by the quality zone to which the received signal quality belongs, and "MAX Down Adj. PC Value by Qual.". Lower threshold for downlink signal strength If the downlink received signal level is less than this threshold, a power increase is computed. Then, the power is increased by the least of the power increase, "MAX Up Adj. PC Value by RX_LEV", and "MAX Up Adj. PC Value by Qual.". Power increase = ("DL RX_LEV Upper Threshold" +
GBFD117601
ms
None
1 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
GBFD117601
0~10
None None
6 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
GBFD117601
ms
None
3 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
GBFD117601
ms
None
1 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
BSC6900
GBFD117601
0~100
None None
5 Cell
Not involved
Not involved
None
Radio
BSC6900
GBFD117601
0~100
None None
55 Cell
Not involved
Not involved
None
Radio
GBFD110703
0~63
dB
None
45 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "DLSSHIGHTHRED" >= Read & "DLSSLOWTHRED". Write
Not involved
Not involved
None
If this parameter is set to a greater value, decrease power control may not be performed when the downlink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, The parameter modification decrease power control may be has no impact on the performed when the downlink power is Versions earlier than equipment. low, in this way, call drops may occur. BSC6900 V900R011
Radio
DLSSLOWT HRED
GBFD110703
Enhanced Power Control Algorithm Public Voice Group Call Service Public Voice Broadcast Service
0~63
dB
None
28 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "DLSSHIGHTHRED" >= Read & "DLSSLOWTHRED". Write
Not involved
Not involved
None
If this parameter is set to a greater value, increase power control may be performed when the downlink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, increase power control The parameter modification may not be performed when the downlink has no impact on the power is low, in this way, call drops may Versions earlier than equipment. occur. BSC6900 V900R011
Radio
BSC6900
GBFD510301 GBFD510302
0~255
None
None
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page78of316
150682621.xls.ms_office
Security Level:
BSC6900
DLTHF1
BSC6900
DLTHF2
BSC6900
DLTHF3
BSC6900
DLTHH1
BSC6900
DLTHH2
BSC6900
Number of times of the BSC resending downlink test messages after the downlink test function is enabled. If the BSC does not receive any response message from the MS at the preset interval, the BSC releases the relevant voice group call service (VGCS) channel. Adjustment threshold 1 of AMR downlink coding rate (full rate). According to a certain algorithm and the RQI in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a call. The RQI value 1 means 0.5 Adjustment threshold 2 of AMR downlink coding rate (full rate). According to a certain algorithm and the RQI in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a call. The RQI value 1 means 0.5 Adjustment threshold 3 of AMR downlink coding rate (full rate). The adjustment thresholds and the hysteresis of coding rate must meet the following conditions: AMR Coding Rate adj.th (n) < AMR Coding Rate adj.th (n + 1), n = 1 or 2; [AMR Coding Rate adj.th (n) + AMR Coding Rate adj.hyst (n)] < [AMR Coding Rate adj.th (n + 1) + AMR Coding Rate adj.hyst (n + 1)], n = 1 or 2. Adjustment threshold 1 of AMR downlink coding rate (half rate). According to a certain algorithm and the RQI in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a call. The RQI value 1 means 0.5 Adjustment threshold 2 of AMR downlink coding rate (half rate). According to a certain algorithm and the RQI in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a call. The RQI value 1 means 0.5
GBFD510301 GBFD510302
1~255
None None
None
Cell
None
Not involved
Not involved
None
Radio
GBFD115501
AMR FR
0~63
dB
None
None
Cell
The setting of this parameter must meet the following conditions: "DLTHF1" < "DLTHF2"; "DLTHF1" + "DLHYSTF1" < "DLTHF2" + Read & "DLHYSTF2". Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The coding rate and MOS are affected.
Radio
GBFD115501
AMR FR
0~63
dB
None
None
Cell
The setting of this parameter must meet the following conditions: "DLTHF2" < "DLTHF3"; "DLTHF2" + "DLHYSTF2" < "DLTHF3" + Read & "DLHYSTF3". Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The coding rate and MOS are affected.
Radio
GBFD115501
AMR FR
0~63
dB
None
None
Cell
The setting of this parameter must meet the following conditions: "DLTHF2" < "DLTHF3"; "DLTHF2" + "DLHYSTF2" < "DLTHF3" + Read & "DLHYSTF3". Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The coding rate and MOS are affected.
Radio
GBFD115502
AMR HR
0~63
dB
None
None
Cell
The setting of this parameter must meet the following conditions: "DLTHH1" < "DLTHH2"; "DLTHH1" + "DLHYSTH1" < "DLTHH2" + Read & "DLHYSTH2". Write
Not involved
Not involved
None
Radio
GBFD115502
AMR HR
0~63
dB
None
None
Cell
The setting of this parameter must meet the following conditions: "DLTHH2" < "DLTHH3"; "DLTHH2" + "DLHYSTH2" < "DLTHH3" + Read & "DLHYSTH3". Write
Not involved
Not involved
None
Radio
6/9/2013
Page79of316
150682621.xls.ms_office
Security Level:
DLTHH3
BSC6900
DLTHWB1
BSC6900
DLTHWB2
BSC6900
Adjustment threshold 3 of AMR downlink coding rate (half rate). According to a certain algorithm and the RQI in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a SET call. The RQI GCELLCCAMR( value 1 Optional) means 0.5 Adjustment threshold 1 of AMR downlink coding rate (wide band). According to a certain algorithm and the RQI in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a SET call. The RQI GCELLCCAMR( value 1 Optional) means 0.5 Adjustment threshold 2 of AMR downlink coding rate (wide band). According to a certain algorithm and the RQI in the call measurement report, the MS and the BTS automatically adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carrier-tointerference ratio of a SET call. The RQI GCELLCCAMR( value 1 Optional) means 0.5 ADD BTSANTFEEDE RBRD(Optional) SET BTSANTFEEDE RCONNECT(Opt ional) ADD BTSANTFEEDE RBRD(Optional) SET BTSANTFEEDE RCONNECT(Opt ional)
GBFD115502
AMR HR
0~63
dB
None
None
Cell
The setting of this parameter must meet the following conditions: "DLTHH2" < "DLTHH3"; "DLTHH2" + "DLHYSTH2" < "DLTHH3" + Read & "DLHYSTH3". Write
Not involved
Not involved
None
Radio
GBFD115507
WB AMR
0~63
dB
None
12 Cell
The setting of this parameter must meet the following conditions: "DLTHWB1" < "DLTHWB2"; ["DLTHWB1" + "DLHYSTWB1" < "DLTHWB2" + Read & "DLHYSTWB2". Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
GBFD115507
WB AMR
0~63
dB
None
18 Cell
The setting of this parameter must meet the following conditions: "DLTHWB1" < "DLTHWB2"; ["DLTHWB1" + "DLHYSTWB1" < "DLTHWB2" + Read & "DLHYSTWB2". Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
DMDUA
Down MDU A
BSC6900
MDU board number when the antenna pass of downlink tributary A is GBFDselected 111202
O&M of BTS
0~255
None None
None
BTS
Not involved
Not involved
None
Equipme nt
DMDUB
Down MDU B
BSC6900
DN
Domain
BSC6900
MDU board number when the antenna pass of downlink tributary B is selected Clock domain required by the slave side in the 1588V2 protocol. This parameter is valid when SET the 1588CLK BTSIPCLKPARA type is (Mandatory) configured.
GBFD111202
O&M of BTS
0~255
None None
None
BTS
Not involved
Not involved
None
Equipme nt
GBFD118620
0~255
None None
None
BTS
None
Not involved
Not involved
None
Radio
BSC6900
Coding scheme of the default GPRS downlink. Dynamic adjustment coding: the coding scheme used during initial access transmission. If the downlink uses the fixed coding scheme, the TBF uses the fixed coding GBFDscheme. 119106
None None
CS2
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Default coding scheme of the downlink EDGE link. If the downlink adopts the dynamic adjustment coding scheme, this parameter can be used to set the coding scheme for transmission during initial access. If the downlink uses the fixed coding scheme, the SET TBF uses the GCELLEGPRSP fixed coding GBFDARA(Optional) scheme. 114201 Default coding scheme used on the downlink EGPRS2-A link. If the downlink uses the dynamic coding scheme, this parameter specifies the coding scheme that is used for the transmission in initial access. If the downlink uses the fixed coding scheme, the SET TBF uses the GCELLEGPRSP fixed coding GBFDARA(Optional) scheme. 510804
EGPRS
Enumeration Type
None None
MCS6
Cell
None
Not involved
Not involved
None
Radio
Downlink EGPRS2-A
Enumeration Type
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS7(MCS7), MCS8(MCS8), DAS5(DAS5), DAS6(DAS6), DAS7(DAS7), DAS8(DAS8), DAS9(DAS9), DAS10(DAS10), DAS11(DAS11), DAS12(DAS12)
MCS1, MCS2, MCS3, MCS4, MCS7, MCS8, DAS5, , DAS6, DAS7, DAS8, DAS9, DAS10, DAS11, DAS12 None None
DAS6
Cell
This parameter is valid only when "EGPRS2A" is Read & set to YES. Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
6/9/2013
Page80of316
150682621.xls.ms_office
Security Level:
Fixed coding scheme that is used on the downlink EGPRS2-A link. If the downlink uses the fixed coding scheme, this parameter can be set MSC1-4, MSC7-8 or DAS5-12.. If the downlink uses the dynamic coding scheme, this SET parameter is GCELLEGPRSP set to ARA(Optional) UNFIXED.
GBFD510804
Downlink EGPRS2-A
Enumeration Type
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS7(MCS7), MCS8(MCS8), DAS5(DAS5), DAS6(DAS6), DAS7(DAS7), DAS8(DAS8), DAS9(DAS9), DAS10(DAS10), DAS11(DAS11), DAS12(DAS12), UNFIXED(UNFIX ED)
MCS1, MCS2, MCS3, MCS4, MCS7, MCS8, DAS5, , DAS6, DAS7, DAS8, DAS9, DAS10, DAS11, DAS12, UNFIXED None None
UNFIXED
Cell
This parameter is valid only when "EGPRS2A" is Read & set to YES. Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
DNFIXCS
Adjustment mode of the downlink GPRS link coding scheme. If the fixed coding scheme is used, this parameter is set to a value ranging from CS1 to CS4. If the dynamic coding scheme is used, this parameter is set to GBFDUNFIXED. 119106
CS1(CS1), CS2(CS2), CS3(CS3), CS4(CS4), UNFIXED(UNFIX CS1, CS2, CS3, ED) CS4, UNFIXED
None None
UNFIXED
Cell
None
Not involved
Not involved
None
Radio
DNFIXMCS
BSC6900
Coding scheme of the downlink EDGE link. If the downlink uses the fixed coding scheme, this parameter is set to a value ranging from MCS1 to MCS9. If the downlink uses the dynamic adjustment coding scheme, this SET parameter is GCELLEGPRSP set to GBFDARA(Optional) UNFIXED. 114201
EGPRS
Enumeration Type
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS5(MCS5), MCS6(MCS6), MCS7(MCS7), MCS8(MCS8), MCS9(MCS9), UNFIXED(UNFIX ED)
None None
UNFIXED
Cell
None
Not involved
Not involved
None The downlink power control (at the BTS side) can support up to 15 levels, in each of which the power of 2 dB is dynamica lly controlle d. During upgrade, pay more attention to the setting of this paramete r. Be sure to check it. If an area is allowed for receiving short message s, set this paramete r to NO. If the value of this paramete r is YES, the MS in either idle or connecte d mode cannot occupy
Radio
DNPCEN
DL PC Allowed
BSC6900
GBFD110703 GBFD117601
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
Radio
DNSENDSM DIS
BSC6900
BSC6900
DNTHDCSD EGRADE1
BSC6900
DNTHDCSD EGRADE2
BSC6900
Whether to prohibit sending pointto-point short messages. If necessary, this parameter is used for controlling whether to send downlink short messages from a specific cell so as to ensure sufficient SET radio channel GCELLCCAD(O resources for ptional) normal calls. Delay of releasing the downlink TBF. After the last downlink RLC data block is transmitted on the network side and all the transmitted downlink data blocks are received, the MS is not informed to stop this downlink TBF. Instead, the state of the last data block is forcibly set to "not received" and the RRBP flag of the SET last data GCELLPRIVATE block is OPTPARA(Optio retransmitted nal) continuously Retransmissi on threshold when the coding mode of the downlink TBF is changed from CS2 to CS1. When the downlink TBF retransmissio n rate is greater than or equals to this value, the coding mode of the SET TBF is GCELLPSCS(O changed ptional) from CS2 to Retransmissi on threshold when the coding mode of the TBF is changed from CS3 to CS2. When the TBF retransmissio n rate is greater than or equals to this value, the coding mode of the SET TBF is GCELLPSCS(O changed ptional) from CS3 to
GBFD110203
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
Radio
GBFD114101
GPRS
0~5000
ms
None
2400 Cell
None
Not involved
Not involved
None
Radio
GBFD119106
0~64
per cent
None
10 Cell
None
Not involved
Not involved
None
Radio
GBFD118901
CS-3/CS-4
0~64
per cent
None
5 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page81of316
150682621.xls.ms_office
Security Level:
DNTHDCSD EGRADE3
BSC6900
BSC6900
BSC6900
Retransmissi on threshold when the coding mode of the downlink TBF is changed from CS4 to CS3. When the downlink TBF Retransmissi on rate is greater than or equals to this value, the coding mode of the TBF is changed from CS4 to Retransmissi on threshold when the coding mode of the downlink TBF is changed from CS1 to CS2. When the TBF retransmissio n rate is less than or equals to this value, the coding mode of the TBF is changed from CS1 to CS2. Retransmissi on threshold when the coding mode of the TBF is changed from CS2 to CS3. When the downlink TBF retransmissio n rate is less than or equals to CS2 to CS1, the coding mode of the TBF is changed from CS2 to
GBFD118901
CS-3/CS-4
0~64
per cent
None
5 Cell
None
Not involved
Not involved
None
Radio
GBFD119106
0~64
per cent
None
5 Cell
None
Not involved
Not involved
None
Radio
GBFD118901
CS-3/CS-4
0~64
per cent
None
2 Cell
None
Not involved
Not involved
None
Radio
Downlink TBF DNTHDCSUP Threshold from GRADE3 CS3 to CS4 Enable Door DOOR_ENGI Status Alarm NE_MASK Reporting
BSC6900
Retransmissi on threshold when the coding mode of the downlink TBF is changed from CS3 to CS4. When the downlink TBF retransmissio n rate is less than or equals to this value, the coding mode of the downlink TBF is changed from CS3 to GBFDCS4. 118901 Door status MRFDalarm switch 210304
0~64
per cent
None
2 Cell
None
Not involved
Not involved
None
BSC6900
CLOSE, OPEN
None OPEN
None
None
None
Not involved
Not involved
BSC6900
Dual-antenna gain used to estimate the SET downlink GCELLPWRBAS power during GBFDIC(Optional) assignment 117602 As a whole number, the DSP code can be expressed by a decimal digit or a hexadecimal digit. If the DSP code is expressed by a hexadecimal ADD digit, H' is N7DPC(Mandato added before ry) the number. None The input format of the DSP is the ADD divided N7DPC(Mandato segment, like ry) 8-8-8. None
0~255, step:0.1
dB
None
None
Cell
Not involved
Not involved
Versions earlier than None BSC6900 V900R011 If you do not use a dualantenna to receive signals, As the double antenna gain increases, the set this The parameter modification downlink power increases; as the double paramete has no impact on the antenna gain decreases, the downlink Versions earlier than r to 0. equipment. power decreases. BSC6900 V900R011
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio Equipme nt
Equipme nt
DPC
BSC6900
None
None
SCCP
When the value of "SPDF" in "ADD N7DPC" is set to DNF, this Read & parameter is valid. Write
BSC6900
None
Transpor t
DPCDNF
BSC6900
None
String Type
None
1~11 characters
None None
None
SCCP
None
Not involved
Not involved
Not involved
DPCGIDX
BSC6900
It is one key field of identifying the block of A interface CIC status and indicates the DPC group index of the circuit BLK ID of the A ACIC(Mandatory interface to GBFD) be blocked. 111803 ADD DPC group AE1T1(Optional) index GBFD111803
DPCGIDX
BSC6900
0~31
None None
None
None
Not involved
Not involved
0~31
None
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None 1. The block of A interface must be configure d. 2. If A over IP is configure d, the configura tion does not support the The parameter modification operation has no impact on the . equipment. None The parameter modification has no impact on the None equipment. None
Transpor t
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
DPCGIDX
BSC6900
DPCT
DSP type
BSC6900
Signaling group of a DSP. If multiple DSPs or one DSP serves as a logical entity, this ADD logical entity GCNNODE(Man is a DSP GBFDdatory) group. 117401 DSP type. IUCS: indicates the IU interface CS control plane and user plane signaling point. IUPS: indicates the signaling point of the IU interface PS control signaling plane. IUR: indicates the RNC signaling point. IUCS_ALCA P: indicates the signaling point of the IU interface CS user signaling plane. IUCS_RANA P: indicates the signaling ADD point of the N7DPC(Mandato IU interface ry) CS control None ADD N7DPC(Mandato ry) ADD MTP3RT(Manda tory) ADD MTP3LKS(Mand atory) ADD M3DE(Mandator y) ADD GCNNODE(Man datory)
MSC Pool
0~31
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
None
Enumeration Type
IUCS(IUCS), IUPS(IUPS), IUR(IUR), IUCS_RANAP(IU CS_RANAP), IUCS_ALCAP(IU CS_ALCAP), AAL2SWITCH(A AL2SWITCH), STP(STP), A(A), IUR_G(IUR_G)
None None
None
SCCP
None
Not involved
Not involved
Not involved
None
Transpor t
DPX
DSP index
BSC6900
The DSP index uniquely indicates the correspondin g relationship of an DSP and OSP. None
None
0~182
None None
None
SCCP
None
Not involved
Not involved
Not involved
None
Equipme nt
DPX
DPX Index
BSC6900
It is valid when the node type is set to IUR, IUCS, IUPS, ADD or ADJNODE(Mand NNI_AAL2S atory) WITCH.
None
None
0~182
None None
None
When the value of "NODET" in "ADD ADJNODE" is set to IUR, IUCS, or NNI_AAL2SWITCH, or the value of "NODET" in "ADD ADJNODE" is set to IUPS and "SGSNFLG" in "ADD ADJNODE" is Adjace set to YES, this Read & nt node parameter is valid. Write
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page82of316
150682621.xls.ms_office
Security Level:
DPX
DPX
BSC6900
MRFD211402
{0~182}
None None
None
BSC
Not involved
Not involved
None
BSC6900 V900R011
Radio
DRHOLEVR ANGE
BSC6900
BSC6900
Maximum signal level difference between the neighbor cell and the ADD serving cell G2GNCELL(Opti for triggering onal) directed retry Whether to optimize the call drops resulting from Abis territorial link fault. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not SET brought into GCELLSOFT(O the statistics ptional) of call drops.
GBFD110601 GBFD510501
0~128
dB
None
72 Cell
None
Not involved
Not involved
None
Radio
GBFD111004
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
Whether to optimize the call drops resulting from connection failure (handover access failure). The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from connection failure, operation and maintenance (OM) intervention. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from a connection failure except for handover access failure, OM intervention, radio link failure, and unavailability of radio resources. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from connection failure (radio link failure). The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from connection failure (unavailability of radio resources). The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from equipment fault. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
DROPCTRL Drop Optimize CONNFAILR Conn Fail[radio link LFAIL fail] BSC6900
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
DROPCTRL Drop Optimize CONNFAILR Conn Fail[resource RNOTAVL not available] BSC6900
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
DROPCTRL EQUIPFAIL
BSC6900
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page83of316
150682621.xls.ms_office
Security Level:
Whether to optimize the call drops resulting from error indication (unsolicited DM response). The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from error indication (sequence error). The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from error indication (T200 timeout). The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from forced handover failure. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from incomingBSC handover timeout. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from outgoing internal intercell handover timeout. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from intra-cell handover timeout. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from no MS measurement reports for a long time. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
DROPCTRL NOMR
BSC6900
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page84of316
150682621.xls.ms_office
Security Level:
DROPCTRL OUTBSCHO T8
Whether to optimize the call drops resulting from outgoingBSC handover timeout. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004 Whether to optimize the call drops resulting from release indications. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought into the statistics GBFDof call drops. 111004
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
DROPCTRL RELIND
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
DROPCTRL RESCHK
BSC6900
DROPPKTT HD0
DROPPKTT HD1
DROPPKTT HD2
Whether to optimize the call drops resulting from resource check. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not SET brought into GCELLSOFT(O the statistics ptional) of call drops. If the duration for buffering the data in queue 0 is more than or equals to the value of this parameter, the subsequent packets added to queue 0 are discarded. For the flow control adopting the ATM, this parameter indicates the threshold for ADD discarding PORTFLOWCT packets in RLPARA(Option the CBR al) queue. If the duration for buffering the data in queue 1 is more than or equals to the value of this parameter, the subsequent packets added to queue 1 are discarded. For the flow control adopting the ATM, this parameter indicates the threshold for ADD discarding PORTFLOWCT packets in RLPARA(Option the RTVBR al) queue. If the duration for buffering the data in queue 2 is more than or equals to the value of this parameter, the subsequent packets added to queue 2 are discarded. For the flow control adopting the ATM, this parameter indicates the threshold for ADD discarding PORTFLOWCT packets in RLPARA(Option the NRTVBR al) queue.
GBFD111004
0~1
None None
1 Cell
None
Not involved
Not involved
None
Radio
None
None
10~150
ms
60 IP:60; ATM:45
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
None
None
10~150
ms
60 IP:60; ATM:45
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
None
None
10~150
ms
60 IP:60; ATM:45
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
DROPPKTT HD3
DROPPKTT HD4
If the duration for buffering the data in queue 3 is more than or equals to the value of this parameter, the subsequent packets added to queue 3 are discarded. For the flow control adopting the ATM, this parameter indicates the threshold for ADD discarding PORTFLOWCT packets in RLPARA(Option the UBR al) queue. None If the duration for buffering the data in queue 4 is more than or equals to the value of this parameter, the subsequent packets added to queue 4 are discarded. For the flow control adopting the ATM, this parameter indicates the threshold for ADD discarding PORTFLOWCT packets in RLPARA(Option the UBR+ al) queue. None
None
10~150
ms
60 IP:60; ATM:80
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
None
10~150
ms
80
BSC69 80 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
6/9/2013
Page85of316
150682621.xls.ms_office
Security Level:
DROPPKTT HD5
If the duration for buffering the data in queue 5 is more than or equals to the value of this parameter, the subsequent ADD packets PORTFLOWCT added to RLPARA(Option queue 5 are al) discarded. None Interval at which the BTS decreases SET the power of BTSBAKPWR(O a TRX ptional) continuously
None
10~150
ms
80
BSC69 80 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
DROPPWRI NTERVAL
BSC6900
GBFD111605
1~60
min
None
10 BTS
This parameter is valid only when "BAKPWRSAVMETHOD Read & " is set to BYPWR. Write
Not involved
Not involved
None
Equipme nt
BSC6900
Delay for which the BTS waits to decrease the power of a TRX after switching SET from the BTSBAKPWR(O mains to GBFDptional) batteries 111605 Step by which the BTS decreases SET the power of BTSBAKPWR(O a TRX at one ptional) time Whether to support the discontinuous reception mechanism (DRX). To reduce the power consumption, the DRX is introduced into the GSM Specification. MSs supporting the DRX can consume less power to receive interested broadcast messages. This prolongs the service time of MS batteries. BSCs supporting the DRX must send scheduling SET messages to GCELLOTHEXT( MSs so that Optional) the MSs can Duration of the timer for entering the DRX mode. DRX is the parameter in the cell broadcast message. It indicates noncontinuous receiving mode. When the MS is switched from the packet transmission mode to the idle mode, the MS needs to maintain the none DRX mode for a moment. After the TBF is released, in the period when the MS is in non-DRX SET mode, the GCELLPSBASE( MS monitors Optional) all the CCCH
0~12
None
3 BTS
This parameter is valid only when "BAKPWRSAVMETHOD Read & " is set to BYPWR. Write
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111605
2~10
dB
None
2 BTS
This parameter is valid only when "BAKPWRSAVMETHOD Read & " is set to BYPWR. Write
Not involved
Not involved
None
Equipme nt
DRXEN
SMCBC DRX
BSC6900
GBFD113602
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
DRXTIMER MAX
BSC6900
GBFD114802
Enumeration Type
0, 1, 2, 4, 8, 16, 32, 64
None
4 Cell
None
Not involved
Not involved
None
Radio
DRYSET
Dehumidification Equipment
BSC6900
Whether to start the dehumidificati on equipment of the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSOUTPUT(Op in another GBFDtional) mode. 111202 Number of the E1T1 ADD port for PPPLNK(Option bearing the al) PPP link of Number the E1T1 ADD port for MPLNK(Optional bearing the ) PPP link GBFD118611 GBFD118622 GBFD118611 GBFD118622
O&M of BTS Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
DS1
BSC6900
0~335
None None
None
PPP link
None
Not involved
Not involved
Not involved
None
Transpor t
DS1
BSC6900
0~335
None None
None
MP link None
Not involved
Not involved
None
Transpor t
DSCP
BSC6900
The DSCP is a field of the IP data packet. It is used to assign the differentiated service to the communicatio n networks. The DSCP code is used to label each data packet on the network and allocate the correspondin g service levels. In the same ADD network SCTPLNK(Optio environment, nal) the larger the SET DSCP is, the PHBMAP(Manda higher the tory) priority is. None Service code of the PING command, used to identify the PING command None
None
0~63
None
62
SCTP 62 link
None
Not involved
Not involved
The priority of the signaling link should be The parameter modification the has no impact on the highest. equipment. None
Transpor t
DSCP
PING IP(Optional)
None
0~63
None
Not involved
Not involved
Not involved
DSCP
BSC6900
DSCP
DSCP
BSC6900
Differentiated service code is used to identify the service priority of the user. None DSCP to be contained in the header of an IP packet. According to this parameter, the router provides differentiated services for packet streams. If this parameter is greater, the service level is higher. This parameter is valid only when the transport type is set to GBFDIP. 118605
None
0~63
None None
None
BSC69 00 None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The existing networkin g can be affected when the relation between the VLAN and the DSCP The parameter modification are has no impact on the reset. equipment. None
Transpor t
Transpor t
IP QOS
0~63
None None
None
BTS
None
Not involved
Not involved
None
Transpor t
6/9/2013
Page86of316
150682621.xls.ms_office
Security Level:
Duration for recovering all the DSPs. This timer is started when the first DSP is recovered. When all the DSPs of the local subrack are recovered or the timer expires, the timer is stopped. The cells are SET distributed on BSCPSSOFTPA the GBFDRA(Optional) recovered 114101 Number of the DSP. For the DPUa, DPUb, DPUc, or DPUd, the value range of "DSP No." is from "0" to "21". For the DPUe, the value range of "DSP No." is from "0" to "27". If you do not specify this parameter, the usage of all DSPs is MRFDqueried. 210301 Number of the DSP where the alarm is generated
GPRS
1~3600
None
180 BSC
None
Not involved
Not involved
None
Equipme nt
DSPN
DSP No.
BSC6900
Configuration Management
0~27
None None
None
None
None
Not involved
Not involved
None
Equipme nt
DSPN
DSP No.
BSC6900
MRFD210304
Faulty Management
0~21
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
DSPN
DSP No.
BSC6900
DSPNO
DSP No.
BSC6900
MRFD210301 GBFD114101
Configuration Management
0~21
None None
None
Board
DSPRECOV ERTIMER
BSC6900
DST
BSC6900
DSTF
BSC6900
Target DSP number. DSP recover time during cell reallocation. When the DSP failure is detected, the timer is started. The system waits for DSP failure recovery before the timer expires. If the DSP failure is recovered or the timer expires, the timer is stopped and the cell SET reallocation BSCPSSOFTPA is RA(Optional) implemented. Whether daylight SET saving time TZ(Optional) starts ULD Name of the BTSDEVFILE(M destination andatory) file
GPRS
0~21
None None
None
BSC
Not involved
Not involved
Cell
If "Play switch" in the "SET TCPLYV OICE" comman d is set, the normal calls may The parameter modification be has no impact on the affected. equipment. None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
GBFD114101
GPRS
0~30
None
15 BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
MRFD210301 GBFD111202
Configuration Management
Enumeration Type
NO(NO), YES(YES)
YES, NO
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt Equipme nt
O&M of BTS
String Type
None
1~128 characters
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
DSTIP
Destination IP address
BSC6900
DSTIP
Destination IP address
BSC6900
ADD IPRT(Mandatory Destination ) IP address None Destination ADD IP address of BTSBFD(Mandat BFD GBFDory) Session. 118609 ADD BTSIPRT(Manda tory) ADD BTSIPRTBIND( Destination Mandatory) IP address
IP Address Type
None
None
IP Address Type
None
None
Not involved
Not involved
Not involved
None
Transpor t
Not involved
Not involved
Not involved
None
Not involved
None
Transpor t
DSTIP
Destination IP address
BSC6900
GBFD118601
Abis over IP
IP Address Type
None
None
IP route
None
Not involved
Not involved
None
Transpor t
DSTMASK
BSC6900
ADD IPRT(Mandatory ) Subnet mask None ADD BTSIPRT(Manda tory) ADD BTSIPRTBIND( Mandatory) ADD TSCROSS(Mand atory)
None
IP Address Type
None
None
IP route
None
Not involved
Not involved
Not involved
None
Transpor t
DSTMASK DSTPORTN O
BSC6900
BSC6900
Abis over IP
IP Address Type
None
None
None
Not involved
Not involved
None
None
Interval Type 0~335 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
0~335
None None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
DSTTSMAS K
BSC6900
BSC6900
ADD Target TSCROSS(Mand timeslot atory) mask None Threshold of the load in the target cell for the directed retry. Only a cell whose load is lower than or equal to this threshold can be selected SET as a GCELLCCBASI candicate GBFDC(Optional) target cell. 110607 Type of the DRX supporting the VGCS service. An MS reads the NCH only when a new notification message of group call arrives. This helps save power of the MS. This parameter is SET mandatory GCELLGSMR(O for a SAGEM ptional) MS. Downlink ADD TRX index BTSANTFEEDE number of RBRD(Mandator the newly y) added board
None
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
E1/T1 port
None
Not involved
Not involved
None
Transpor t
Direct Retry
0~100
per cent
None
85 Cell
The value of DTLOADTHRED must be set when "REASSEN" in the "SET GCELLBASICPARA" command is set to Read & DIRECTRYEN. Write
Not involved
Not involved
None
Radio
DTRTYPE
DRX Type
BSC6900
GBFD510301
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
DTRX
BSC6900
GBFD111202
O&M of BTS
Interval Type 1~12 1(1), 2(2), 3(3), 4(4), 5(5), 6(6), 7(7), 8(8), 9(9), 10(10), 11(11), 12(12)
1~12
None None
None
BTS
Not involved
Not involved
None
Equipme nt
DTRX
BSC6900
SET Index number BTSANTFEEDE of the RCONNECT(Opt downlink GBFDional) tributary 111202 TRX board pass number connected with the downlink GBFDtributary 111202
O&M of BTS
Enumeration Type
None
BTS
None
Not involved
Not involved
None
Equipme nt
DTRXPN
BSC6900
O&M of BTS
0, 1
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
DTRXPN
BSC6900
TRX board pass number SET connected BTSANTFEEDE with the RCONNECT(Opt downlink GBFDional) tributary 111202 Number of the slot where the TRX board ADD that connects BTSANTFEEDE to downlink RBRD(Mandator tributary is GBFDy) located 111202 Number of the slot where the TRX board SET that connects BTSANTFEEDE to downlink RCONNECT(Opt tributary is GBFDional) located 111202
O&M of BTS
0~1, 255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
DTRXSN
BSC6900
O&M of BTS
0~23
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
DTRXSN
BSC6900
O&M of BTS
0~23, 255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page87of316
150682621.xls.ms_office
Security Level:
DTRXSRN
BSC6900
Number of the subrack where the TRX board ADD that connects BTSANTFEEDE to downlink RBRD(Mandator tributary is GBFDy) located 111202 Number of the subrack where the TRX board SET that connects BTSANTFEEDE to downlink RCONNECT(Opt tributary is GBFDional) located 111202 Whether a BTS randomizes the dummy bits (0x2B) in all the signaling messages that the BTS sends to an GBFDMS 113521 GBFD118601 GBFD111207
O&M of BTS
0~53
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
DTRXSRN
BSC6900
O&M of BTS
0~53, 255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
DUPLEX
Duplex mode
BSC6900
DURATH
Duration Hour
BSC6900
DURATH
Duration Hour
BSC6900
DURATM
Duration Minute
BSC6900
DURATS
Duration Second
BSC6900
BSC6900
SET GCELLSOFT(O ptional) SET BTSETHPORT( Optional) Duplex mode STR Duration for BTSTST(Mandat starting the ory) BTS test Duration for STR starting the TRXBURSTTST( TRX idle Mandatory) timeslot test STR Duration for BTSTST(Mandat starting the ory) BTS test Duration for STR starting the BTSTST(Mandat TRX idle ory) timeslot test Downlink multiplex threshold of dynamic channel conversion. When the subscriber number on the channel reaches the value (threshold/10 ), the dynamic SET channel GCELLPSCHM( conversion is Optional) triggered.
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
None
FULL, HALF
None None
None
BTS
None
Not involved
Not involved
None
0~12
None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
BSC6900 V900R011
GBFD111207 GBFD111207
1~24
None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt Equipme nt
0~59
min
None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
GBFD111207
0~59
None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GBFD113101
10~80
per cent
None
20 Cell
None
Not involved
Not involved
None
Radio
DWNINTEN
An MS can be used to test the Um interface software synchronizati on only when the DL signal strength after the power control compensatio n in the test cell and the observed cell is higher than GBFDthis limit. 118201
SoftSynchronized Network
0~63
None
20 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
DXXINDEX
Up DXX Index
BSC6900
ADD BTSCONNECT( Mandatory) ADD DXX(Mandatory) ADD DXXCONNECT( Mandatory) ADD DXXTSEXGREL ATION(Mandator y)
Number of a DXX. It is unique in one BSC and uniquely identifies a GBFDDXX. 111202 Number of a DXX. It is unique in one BSC and uniquely identifies a GBFDDXX. 111203
O&M of BTS
0~2047
None None
None
BTS
None
BTS
This paramete r can be modified only when the BTS is The BTS should be reset to deactivat validate the parameter ed. modification. None
Radio
DXXINDEX
DXX Index
BSC6900
O&M of BSC
0~2047
None None
None
BTS
None
BTS
None
Radio
DXXPN
BSC6900
DYNCHFRE ETM
DYNCHNPR EEMPTLEV
BSC6900
DYNCHTRA NRESLEV
BSC6900
Number of the upper DXX port Time to wait for releasing the dynamic channel after the TBF on the dynamic channel is released. When all the TBFs on the channel are released, the dynamic channel is not released at once. Instead, the timer is started when the channels are idle. Before the timer expires, if new service request is received, the dynamic channel is still occupied and timer is stopped; otherwise, the dynamic Mode of preempting the dynamic channel for the CS domain and PS domain. Only the channel configured in the TCH/F mode can be preempted. "Preempt all dynamic TCHFs" indicates the circuit domain can preempt all the dynamic channels. "No preempt of CCHs" indicates the circuit domain can preempt all the dynamic channels. "No preempt of service TCHF" indicates the Number of full-rate TCHs reserved for the CS domain. This parameter is valid only when "Level of Preempting Dynamic Channel" is set to LEVEL1 or
GBFD111202
O&M of BTS
0~15
None None
None
BTS
None
BTS
This paramete r can be modified only when the BTS is The BTS should be reset to deactivat validate the parameter ed. modification. None
Radio
GBFD113101
10~3600
None
20 Cell
None
Not involved
Not involved
None
Radio
GBFD113101
LEVEL0(Preemp t all dynamic TCHFs), LEVEL1(No preempt of CCHs), LEVEL2(No preempt of LEVEL0, LEVEL1, service TCHF) LEVEL2
None None
LEVEL0
Cell
None
Not involved
Not involved
None
Radio
GBFD113101
0~8
None None
2 Cell
None
Not involved
Not involved
None
Radio
BSC6900
Whether to enable the function of dynamically switching off SET the TRX GCELLBASICPA power RA(Optional) amplifier
GBFD111602
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
E1DURAT
Duration
BSC6900
Whether to enable the cell to support dynamic SET transmit GCELLCHMGBA diversity or GBFDSIC(Optional) dynamic PBT 118101 STR Duration for TRANSPERFTS the test in E1 GBFDT(Mandatory) mode 111203
Enumeration Type
None
Cell
None
Not involved
Not involved
None
O&M of BSC
1~60
min
None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio Transpor t
BSC6900 V900R011
6/9/2013
Page88of316
150682621.xls.ms_office
Security Level:
E1PORT
Port No.
BSC6900
Number of the E1 port. For the BTS3012, BTS3012AE, and BTS3012 II, the number can be a value from 0 to 7. For other BTSs, the number can be a value from 0 GBFDto 3. 118601
Abis over IP
0~7
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
BSC6900
Number of the E1 port ADD on the BTS BTSABISHDLCP connected to GBFDATH(Mandatory) the BSC. 118401
0~31
None None
None
BTS
None
Not involved
Not involved
Not involved
Not involved
BSC6900 V900R011
Radio
BSC6900
GBFD111207
Enumeration Type
ACTIVE(ACTIVE TMU/MMU/IOMU /DOMU), ACTIVESTANDB Y(ACTIVE/STAN DBY TMU), SLAVE1(SLAVE TMU1/DOMU1), ACTIVE, SLAVE2(SLAVE ACTIVESTANDBY, TMU2/DOMU2) SLAVE1, SLAVE2
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
E1T1PN
BSC6900
None
None
0~83
None None
None
Not involved
Not involved
It is used for interwork ing with products of other The parameter modification manufact has no impact on the urers. equipment. None
Transpor t
E1T1PN
BSC6900
Number of the E1/T1 port from which the BTS extracts the transport clock. This parameter is valid only when the clock type is SET set to BTSCLK(Mandat IP_TRANSF MRFDory) ER. 210501 Number of the port extended by the backboard TOP communicatio n mechanism MRFDof the BTS 211501
BTS/NodeB Clock
0~7
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
16~19
None None
None
BTS
None
BTS
None
Radio
E1T1TYPE
E1/T1 Type
BSC6900
ECHOIP
Check IP address
BSC6900
Type of the E1/T1 from which the BTS extracts the transport clock. This parameter is valid only when the clock type is SET set to BTSCLK(Mandat IP_TRANSF MRFDory) ER. 210501 Check peer IP address. The input address (CHKIPADD R) must be the address (regardless of the network segment address or host address of the peer address) in the network segment specified by the (PEERIPAD ADD DR, IPPATH(Mandat PEERMASK) ory) . None As a performance counter for 3G cells, Ec/No indicates the ratio of the energy per received chip to the spectral noise power density. If the Ec/No of a 3G neighbor cell is greater than "HOECNOTH 3G" plus this parameter, the neighbor cell is listed ADD in the G3GNCELL(Opti candidate GBFDonal) cell queue. 114301 Threshold for determining the layer of the 3G neighbor cell. If the Ec/No of the 3G neighbor cell is less than this threshold, the neighbor cell is set to the lowest layer (layer 5). Early classmark sending control (ECSC). This parameter specifies whether the MSs in a cell use early classmark sending. For details, see GSM Rec. 04.08. After receiving a message about a classmark change, the MS sends additional classmark information to the network as early as possible. The CM3 (classmark 3) information contains the power information of
BTS/NodeB Clock
Enumeration Type
E1(E1), T1(T1)
E1, T1
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
None
IP Address Type
None
None
When the value of "PATHCHK" in "ADD IPPATH" is set to ENABLED, this IP path parameter is valid.
Not involved
Not involved
The address must exist and respond to the The parameter modification PING has no impact on the request. equipment. None
Transpor t
ECNOOFF
Ec/No Offset
BSC6900
GSM/WCDMA Interoperability
0~49
dB
None
3 Cell
A 3G neighboring cell can be added into the candidate cell queue when the following conditions are met: "INTERRATOUTBSCHO EN" is set to YES; "BET3GHOEN" is set to YES; the Ec/No of the 3G neighboring cell for a period of time is greater than the sun of "HOECNOTH3G" and Read & "ECNOOFF". Write
Not involved
Not involved
None
If this parameter is set to a greater value, the corresponding neighboring 3G cell may be difficult to become the candidate neighboring cell of the serving cell. In this way, call drops may occur because the handovers may not be performed timely. If this parameter is set to a smaller value, The parameter modification a call may be handed over to a has no impact on the neighboring 3G cell with low signal Versions earlier than equipment. strength, thus affecting voice quality. BSC6900 V900R011
Radio
ECNOTHRE S
GBFD114301
GSM/WCDMA Interoperability
0~49
dB
None
30 Cell
None
Not involved
Not involved
None
Radio
ECSC
ECSC
BSC6900
GBFD111101
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
For a 900/1800 MHz CoBCCH cell, the recommended value is YES. For a 1800 MHz cell in the dual-band network, the recommended value is YES. If the A5/4-7 encryption algorithm is used, the recommended value is YES.
Cell
None
Not involved
Not involved
None
Radio
ecsn
BSC6900
EXP ALMLOG(Option al) End serial STA number of ALMLOG(Option the alarm al) record Date when the scheduled task is stopped
MRFD210304
Faulty Management
1~2147483646
None
2147483646
2147483646 RNC
None
Not involved
Not involved
None
Equipme nt
ED
End Date
BSC6900
GBFD111203
O&M of BSC
Compound Type
2000-1-1~2037-1231
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
ed
End Date
BSC6900
End date of the alarm record. By EXP default, the ALMLOG(Option end date is al) 2038-12-31. End date of the alarm record. By STA default, the ALMLOG(Option end date is al) 2038-12-31. STR BTSLOG(Option al) End date
MRFD210304
Faulty Management
Compound Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
ed
End Date
BSC6900
MRFD210304
EDATE
End Date
BSC6900
GBFD111602
Compound Type
None None
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
Compound Type
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page89of316
150682621.xls.ms_office
Security Level:
EDAY
End date
BSC6900
SET TZ(Mandatory)
MRFD210301
Configuration Management
1~31
None
None
BSC69 00 None
Not involved
Not involved
1. If you set the start date or end date of daylight saving time (DST) to a day of the week after a specific date, the specific date must be six days or more days prior to the last day of the month. For example, the last day of October is the The parameter modification 31st day. has no impact on the Then, the equipment. None
Equipme nt
EDBLASTTI ME
BSC6900
According to the P/N rule, if the conditions for the handover between the subcells of an enhanced dualfrequency network are met during P of N measurement s, the handover is triggered. This SET parameter GCELLHOEDBP specifies the GBFDARA(Optional) number P. 114402 According to the P/N rule, if the conditions for the handover between the subcells of an enhanced dualfrequency network are met during P of N measurement s, the handover is triggered. This SET parameter GCELLHOEDBP specifies the GBFDARA(Optional) number N. 114402 If the current system flow control level is greater than this parameter, the handover between the underlaid and overlaid subcells due to low or high load in the SET underlaid GCELLHOEDBP subcell is not GBFDARA(Optional) allowed. 114402 Whether the SET current cell GCELLGPRS(O supports GBFDptional) EDGE. 114201 According to the P/N rule, if a neighbor cell meets the conditions for selecting the neighbor cell for edge handover in P of N measurement reports, the edge handover to the neighbor cell is triggered. This parameter specifies the number P.
1~255
None
4 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell. The following condition must be met: "EDBSTATTIME" >= "EDBLASTTIME".
Not involved
Not involved
None
Radio
EDBSTATTI ME
BSC6900
1~255
None
5 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell. The following condition must be met: "EDBSTATTIME" >= "EDBLASTTIME".
Not involved
Not involved
None
Radio
BSC6900
0~11
None None
10 Cell
EDGE
EDGE
BSC6900
EGPRS
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Read & EDB_cell. Write This parameter is valid only when "GPRS" is set to SupportAsInnPcu or Read & SupportAsExtPcu. Write
Not involved
Not involved
None
If this parameter is set to a greater or a smaller value, the balance between the The parameter modification traffic volume on the overlaid subcell and has no impact on the that on the underlaid subcell may not be equipment. achieved. The parameter modification has no impact on the equipment. None
Radio
Cell
None
Radio
GBFD110601 GBFD510501
1~16, step:0.5
None
1 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGEADJSTATTIME" >= "EDGEADJLASTTIME".
Not involved
Not involved
None
Radio
According to the P/N rule, if a neighbor cell meets the conditions for selecting the neighbor cell for edge handover for P seconds within N seconds, the edge handover to the neighbor cell is triggered. This parameter specifies the GBFDnumber P. 510501 According to the P/N rule, if a neighbor cell meets the conditions for selecting the neighbor cell for edge handover in P of N measurement reports, the edge handover to the neighbor cell is triggered. This GBFDparameter 110601 specifies the GBFDnumber N. 510501 According to the P/N rule, if a neighbor cell meets the conditions for selecting the neighbor cell for edge handover for P seconds within N seconds, the edge handover to the neighbor cell is triggered. This parameter specifies the GBFDnumber N. 510501 According to the P/N rule, if the conditions for edge handover are met in P of N measurement reports, the handover is triggered. This GBFDparameter 110601 specifies the GBFDnumber P. 510501
HUAWEI II Handover
1~16
None
2 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGEADJSTATTIME1" >= Read & "EDGEADJLASTTIME1". Write
Not involved
Not involved
None
Radio
1~16, step:0.5
None
1 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGEADJSTATTIME" >= "EDGEADJLASTTIME".
Not involved
Not involved
None
BSC6900 V900R011
Radio
HUAWEI II Handover
1~16
None
3 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGEADJSTATTIME1" >= Read & "EDGEADJLASTTIME1". Write
Not involved
Not involved
None
Radio
EDGELAST
1~16, step:0.5
None
1 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGESTAT" >= "EDGELAST".
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time. Thus, the voice quality is decreased and call drops may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
6/9/2013
Page90of316
150682621.xls.ms_office
Security Level:
According to the P/N rule, if the conditions for edge handover are met for P seconds within N seconds, the handover is triggered. This parameter specifies the GBFDnumber P. 510501 According to the P/N rule, if the conditions for edge handover are met in P of N measurement reports, the handover is triggered. This GBFDparameter 110601 specifies the GBFDnumber N. 510501 According to the P/N rule, if the conditions for edge handover are met for P seconds within N seconds, the handover is triggered. This parameter specifies the GBFDnumber N. 510501
HUAWEI II Handover
1~16
None
2 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGESTAT1" >= "EDGELAST1".
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time. Thus, the voice quality is decreased and call drops may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
EDGESTAT
1~16, step:0.5
None
1 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGESTAT" >= "EDGELAST".
Not involved
Not involved
None
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, The parameter modification the handover cannot be performed in has no impact on the time. Thus, the voice quality is decreased Versions earlier than equipment. and call drops may occur. BSC6900 V900R011
Radio
HUAWEI II Handover
1~16
None
3 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGESTAT1" >= "EDGELAST1".
Not involved
Not involved
EFACHDL
BSC6900
WCDMA EFACH channel downlink factor Effect Immediately Flag Whether to support the 11-bit EGPRS access request. Whether the current cell supports EGPRS2-A. Used for EDGE 8PSK transmission quality statistics. If MEAN_BEP is less than or equals to this threshold, the transmission quality is regarded to be deteriorated. MEAN_BEP indicates the average error code rate in one measurement report period. Used for EDGE GMSK transmission quality statistics. If MEAN_BEP is less than or equals to this threshold, the transmission quality is regarded deteriorated. MEAN_BEP indicates the average error code rate in one measurement report Type of the end date. "WEEK" indicates that the end date is a weekday. "DATE" indicates that the end date is a month day. "DATEWEEK " indicates the end date is expressed by a combination of weekday and month day. Priority level of an emergency call. If this parameter is set to 15, the functions of reserving TCHs for emergency calls and preempting TCHs are not enabled. If the two functions need to be enabled, set this parameter to a value from 1 to 14. If the value of "Emergency Call Preemption Permitted" is ON, this parameter can also be used for TCH preemption. The value 1 means the
None GBFD111202
None
O&M of BTS
Interval Type 0~100 0~100 NO(Effect Later), Enumeration YES(Effect Type Immediately) YES, NO
per cent
20
BSC69 20 00 None
Not involved
Not involved
None None
None
None
None
Not involved
Not involved
None The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h The parameter modification modificati has no impact on the on of the equipment. None The parameter modification has no impact on the None equipment. None
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, The parameter modification the handover cannot be performed in has no impact on the time. Thus, the voice quality is decreased Versions earlier than equipment. and call drops may occur. BSC6900 V900R011
Radio
Transpor t Equipme nt
BSC6900 V900R011
EGPRS11BI TCHANREQ
BSC6900
EGPRS2A
EGPRS2-A
BSC6900
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
This parameter is valid only when "GPRS" is set Read & to SupportAsInnPcu. Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
GBFD116201
0~31
None None
16 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD116201
0~31
None None
7 Cell
None
Not involved
Not involved
None
Radio
EM
EndType
BSC6900
SET TZ(Mandatory)
MRFD210301
Configuration Management
Enumeration Type
DATE(Input with date), WEEK(Input with week), DATEWEEK(Inp ut with date and DATE, WEEK, week) DATEWEEK
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
EMCPRILV
BSC6900
GBFD110202
1~15
None None
None
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page91of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether to verify the centralized signaling link in the case of the link establishmen t. ON: emergency verification, that is, the verification is not required. OFF: non emergency verification, ADD that is, the MTP3LKS(Optio verification is nal) required. None
None
Enumeration Type
OFF(OFF), ON(ON) ERR_PFM_5E6( OCCUR:5E-6), ERR_PFM_1E5( OCCUR:1E-5), ERR_PFM_5E5( OCCUR:5E-5), ERR_PFM_1E4( OCCUR:1E-4), ERR_PFM_5E4( OCCUR:5E-4), ERR_PFM_1E3( OCCUR:1E-3), ERR_PFM_5E3( OCCUR:5E-3)
OFF, ON
None OFF
OFF
MTP3 link
None
Not involved
Not involved
For the modificati on of the paramete r, See The parameter modification the ITU-T has no impact on the Q704. equipment. None
Transpor t
EMITTHD
BSC6900
GBFD118611 GBFD118622
Enumeration Type
None None
ERR_PFM_1E5
Board
None
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
EMLDSCP
EML DSCP
BSC6900
EMLPPEN
Allow EMLPP
BSC6900
Differentiated service code SET of the BTSABISPRIMA specified P(Optional) EML None Whether to allow the function of enhanced multi-level precedence and preemption (eMLPP). With the eMLPP function enabled, the network can use different policies such as queuing, preemption, or directed retry based on the priorities of different calls when network resources are occupied. If this parameter is set to YES, when SET preemption GCELLCCBASI occurs, the GBFDC(Optional) MS with the 115001 Indicating whether the eMLPP function is enabled in a cell and indicating the eMLPP priority of the cell. From high to low, the priorities are A, B, 0, SET 1, 2, 3, 4. No GCELLGSMR(O priority is the GBFDptional) lowest. 510307 Whether to include the Emlpp Priority information element in the Paging Command message over the Abis interface when "Allow EMLPP" is set to YES and the Emlpp flag in the Bitmap information element of the Paging message SET received OTHSOFTPARA from the GBFD(Optional) MSC is 1 115001 Service SET priority of the BTSABISPRIMA specified P(Optional) EML None Service priority of the SET extension BSCSRVPRI(Op maintenance GBFDtional) link (EML) 118605
None
0~63
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Enumeration Type
NoPriority(No Priority), Priority4(Priority 4), Priority3(Priority3 ), Priority2(Priority 2), Priority1(Priority 1), Priority0(Priority 0), PriorityB(Priority NoPriority, Priority4, B), Priority3, Priority2, PriorityA(Priority Priority1, Priority0, A) PriorityB, PriorityA
None None
NoPriority
Cell
None
Not involved
Not involved
None
Radio
BSC6900
NO(No), YES(Yes)
NO, YES
None None
NO
BSC69 00 None
Not involved
Not involved
None
Radio
EMLPRI
EML Priority
BSC6900
None
0~7
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
EMLSP
BSC6900
IP QOS
0~7
None None
None
BSC69 00 None
Not involved
Not involved
None
Transpor t
BSC6900
None
None
2~4094
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
EMONTH
End month
BSC6900
EMSIP
EMS IP Address
BSC6900
Month on which DST MRFDends 210301 IP address of ADD the NE EMSIP(Mandato management ry) system None SET TZ(Mandatory)
Configuration Management
Enumeration Type
JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September) JAN, FEB, MAR, , OCT(October), APR, MAY, JUN, NOV(November), JUL, AUG, SEP, DEC(December) OCT, NOV, DEC
None None
None
BSC69 00 None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
None
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
ENABLE
BSC6900
ENABLED
BSC6900
Whether to enable the SET fallback BTSFALLBACK( function for Optional) the BTS Whether to SET enable the BTSTMA(Manda power supply tory) of the TMA
GBFD510309
Enumeration Type
GBFD111202
O&M of BTS
Enumeration Type
NO(No), YES(Yes) NO, YES ENABLED(Enabl ed), DISABLED(Disa ENABLED, bled) DISABLED
None None
None
BTS
None
Not involved
Not involved
None This paramete r is supporte d only by the following types of BTSs: BTS3012 , BTS3006 C, BTS3012 AE, BTS3012 II, and The parameter modification BTS3002 has no impact on the E. equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
Equipme nt
None None
None
None
None
Not involved
Not involved
ENCRY
Encryption Algorithm
BSC6900
Encryption GBFDSET algorithm 113501 GCELLBASICPA supported by GBFDRA(Optional) the BSS side 113503
A5/1 and A5/2 Ciphering Algorithm A5/1 Encryption Flow Bit Field Optimization Type
None None
None
Cell
None
Not involved
Not involved
None The value of this paramete r must be the same at both the BSS side and the NSS side. Whether the BSC is encrypte d and the chosen encryptio n algorithm type must be describe d in the MAP function process of the MSC. When setting the encryptio The parameter modification n has no impact on the algorithm equipment. None
BSC6900 V900R011
Equipme nt
Radio
6/9/2013
Page92of316
150682621.xls.ms_office
Security Level:
BSC6900
Encryption mode used when the NE serves as the FTP client AUTO: indicating that the FTP client automatically selects the encryption mode PLAINTEXT: indicating that the plain text mode is used forcibly. ENCRYPTE D: indicating that the SET encrypted FTPSSRV(Optio mode is used GBFDnal) forcibly. 111203 Encryption mode supported when the NE serves as the FTP server AUTO: indicating that the FTP client automatically selects the encryption mode PLAINTEXT: indicating that the plain text mode is used forcibly. ENCRYPTE D: indicating that the SET encrypted FTPSCLT(Optio mode is used nal) forcibly. Whether to enable endto-end user tracing for the BSC. If this parameter is set to YES, the BSC starts end-toend user tracing after the BSC receives the MSC Invoke Trace or BSS Invoke SET Trace OTHSOFTPARA message (Optional) from the EXP ALMLOG(Option al) STA End number ALMLOG(Option of the alarm al) record
O&M of BSC
Enumeration Type
AUTO(Automatic ), PLAINTEXT(Plai ntext), ENCRYPTED(SS AUTO, PLAINTEXT, L Encrypted) ENCRYPTED None AUTO
AUTO
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111203
O&M of BSC
Enumeration Type
AUTO(Auto), PLAINTEXT(Plai ntext), ENCRYPTED(SS AUTO, PLAINTEXT, L Encrypte) ENCRYPTED None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD116401
NO(No), YES(Yes)
NO, YES
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
endaid
End Alarm ID
BSC6900
MRFD210304
Faulty Management
1~65535
None None
None
RNC
None
Not involved
Not involved
ENDCIC
End CIC
BSC6900
It indicates the end CIC of the A interface CIC segment. When operation mode is set to OPC index, DPC group index, BSC ID, or BLK CIC, the ACIC(Mandatory parameter is GBFD) mandatory. 111803 It indicates the end CIC of the Pb interface CIC segment. 2. If the search object mode is set to search by the specified BLK range, the PBCIC(Mandator parameter is y) mandatory. End date of the date range during which to disable the BSC from shutting down the power ADD amplifier of a BSCDSTPADAT TRX E(Mandatory) dynamically If the ambient temperature reaches the value of this parameter, the heater is shut down. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDHEUBP(Op in another tional) mode. End month of the date range during which to disable the BSC from shutting down the power ADD amplifier of a BSCDSTPADAT TRX E(Mandatory) dynamically SET Number of BTSFORBIDTS( the end subOptional) timeslot Time when the BSC stops shutting down the power amplifier of a SET TRX BSCDSTPA(Opti dynamically onal) every day
0~65535
None None
None
E1/T1 link
When the value of "OPMODE" of "BLK ACIC" is BYCICRANGE, the value of ENDCIC Read & needs to be set. Write
Not involved
Not involved
The parameter modification has no impact on the None equipment. None 1. The block of A interface must be configure d. 2. If A over IP is configure d, the configura tion does not support the operation . 3. The differenc e between the end CIC and the start CIC is The parameter modification smaller has no impact on the than 256. equipment. None
Equipme nt
Equipme nt
ENDCIC
End CIC
BSC6900
GBFD111203
O&M of BSC
0~65535
None None
None
None
None
Not involved
Not involved
None
Transpor t
EndDayDST PA
GBFD111602
1~31
None None
None
The following condition must be met: the value of "EndDayDSTPA" is greater than that of "StartDayDSTPA" when "EndMonthDSTPA" and BSC69 "StartMonthDSTPA" are Read & 00 set to a same value. Write
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111202
O&M of BTS
Interval Type -990~400 JAN(Jan.), FEB(Feb.), MAR(Mar.), APR(Apr.), MAY(May), JUN(Jun.), JUL(Jul.), AUG(Aug.), SEP(Sep), OCT(Oct.), NOV(Nov.), DEC(Dec) 0(0), 2(2), 4(4), 6(6)
0 BTS
The value of this parameter must be greater than "Heater Startup Temperature".
Not involved
Not involved
None
Equipme nt
EndMonthDS Prohibit Close TRX TPA Power End Month BSC6900 End Sub Timeslot NO.
GBFD111602 GBFD111202
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC
None None
None
Not involved
Not involved
None
ENDSUBTS
BSC6900
O&M of BTS
0, 2, 4, 6
None None
None
BTS
None
BTS
None
The parameter modification has no impact on the equipment. None The BTS should be reset to validate the parameter modification. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt
Radio
BSC6900
GBFD111602
Compound Type
00:00~23:59
None None
None
When "BSCDynSwitchTrxPAAll ow" is set to YES, the value of BSC69 "EndTimeTACloseTrxPA" Read & 00 must be set. Write
Not involved
Not involved
ENDTS
End TS
BSC6900
It indicates the end CIC BLK of the Ater ATERE1T1(Man interface CIC GBFDdatory) segment. 111801
8~255
None None
None
E1/T1 link
When the value of "OPMODE" of "BLK ATERE1T1" is BYCICRANGE, the value of ENDTS needs to be Read & set. Write
Not involved
Not involved
The parameter modification has no impact on the None equipment. None 1. The block of Ater interface must be configure d. 2. If the BSC is configure d to the integrate d BMTC or A over IP is configure d, the configura tion does not support the operation . 3. If the block operation is applicabl e to only the ATERTS The parameter modification of the has no impact on the BM equipment. None
Equipme nt
Transpor t
6/9/2013
Page93of316
150682621.xls.ms_office
Security Level:
ENDTS
End TS
BSC6900
ENDTS
BSC6900
It indicates the end CIC of the A interface CIC segment. When Operation mode is set to subrack No., slot No., port No., or BLK CIC, the AE1T1(Mandator parameter is y) mandatory. SET Number of BTSFORBIDTS( the end Mandatory) timeslot Status of the scheduled task. This parameter determines whether to start the scheduled task. Status of the scheduled subtask to be added If the load of the underlaid subcell is greater than this threshold, certain calls in the underlaid subcell are handed over to the overlaid subcell to balance the traffic between the overlaid and underlaid subcells. Whether to support PS downlink MAC back pressures in GSM. When the buffer is overflowed, the L2 transmission rate is limited if "User Plane DL Flow Ctrl Switch" is "ON". Thus, the data blocks are not lost. If "User Plane DL Flow Ctrl Switch" is "OFF", the L2 transmission rate is not limited. In this case, the loss of data blocks may occur. When "User Plane DL Flow Ctrl Switch" is set to "ON", the Whether to enable the enhanced concentric cell algorithm in a concentric cell. If a cell supports the enhanced concentric cell function, when an overlaid-tounderlaid handover or an underlaidto-overlaid handover is decided, the MS compares the receive level value respectively with the values of "OtoU HO Received Level Threshold" and "UtoO HO Received If all the calls in the overlaid subcell are handed over to the underlaid subcell when the channel seizure ratio of the underlaid subcell is less than "En Iuo Out Cell Low Load Thred", the BSC load increases sharply. In this case, the target subcell may be congested and drop calls. To avoid such a problem, the hierarchical load-based handover algorithm is used to hand over the calls Signal level step for the hierarchical load-based handover from the overlaid subcell to the underlaid subcell If the load of the underlaid subcell is less than this threshold, certain calls in the overlaid subcell are handed over to the underlaid subcell to balance the traffic between the overlaid and underlaid subcells.
GBFD111803 GBFD111202
1~31, step:8
None None
None
E1/T1 link
When the value of "OPMODE" of "BLK AE1T1" is BYCICRANGE, the value of ENDTS needs to be Read & set. Write Read & Write
Not involved
Not involved
O&M of BTS
1~31
None None
None
BTS
None
BTS
1. The block of A interface must be configure d. 2. If the BSC is configure d to the integrate d BMTC or A over IP is configure d, the configura tion does not support the operation . 3. If the block operation is applicabl e to only the AE1T1 of The parameter modification the BM has no impact on the subrack. equipment. None The BTS should be reset to validate the parameter None modification. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t
Radio
ENF
Status
BSC6900
GBFD111203
O&M of BSC
Enumeration Type
ENF
Subtask Status
BSC6900
GBFD111203
O&M of BSC
Enumeration Type
DISABLED(prohi bit_to_use), ENABLED(availa DISABLED, ble) ENABLED DISABLED(prohi bit_to_use), ENABLED(availa DISABLED, ble) ENABLED
None None
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
None available
None
RNC
None
Not involved
Not involved
None
Equipme nt
ENGOVERL DTHRSH
GBFD113201
0~100
per cent
None
70 Cell
This parameter is valid only when "UTOOTRAFHOALLOW" is set to YES. The following condition must be met: "ENSOVERLDTHRSH" > "ENGOVERLDTHRSH" > Read & "ENLOWLDTHRSH". Write
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the underlaid The parameter modification subcell; if this parameter is set to a has no impact on the smaller value, congestion may occur in Versions earlier than equipment. the overlaid subcell. BSC6900 V900R011
Radio
BSC6900
GBFD118605
IP QOS
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
OFF
Cell
None
Cell
None
The parameter modification The number of block retransmissions is has no impact on the decreased and the throughput is equipment. increased.
BSC6900 V900R011
Equipme nt
ENIUO
GBFD113201
OFF(Off), ON(On)
OFF, ON
None None
ON
Cell
None
Not involved
Not involved
None
Radio
ENLDHOPR D
GBFD113201
1~255
None
5 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to ENIUO.
Not involved
Not involved
None
If this parameter is set to a smaller value, congestion may occur in the underlaid The parameter modification subcell in a short time; if this parameter is has no impact on the set to a greater value, congestion in the Versions earlier than equipment. overlaid subcell is difficult to be relieved. BSC6900 V900R011
Radio
GBFD113201
0~63
dB
None
5 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to ENIUO.
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the underlaid The parameter modification subcell in a short time; if this parameter is has no impact on the set to a smaller value, congestion in the Versions earlier than equipment. overlaid subcell is difficult to be relieved. BSC6900 V900R011
Radio
ENLOWLDT HRSH
En Iuo Out Cell Low Load Thred Transmission Resource Preempting Support
BSC6900
GBFD113201
0~100
per cent
None
20 Cell
This parameter is valid only when "UTOOTRAFHOALLOW" is set to YES. The following condition must be met: "ENSOVERLDTHRSH" > "ENGOVERLDTHRSH" > Read & "ENLOWLDTHRSH". Write
Not involved
Not involved
None
If this parameter is set to a greater value, traffic load on the underlaid subcell is increased, and thus congestion may occur in the underlaid subcell. If this parameter is set to a smaller value, traffic load on The parameter modification the overlaid subcell is increased, and thus has no impact on the congestion may occur in the overlaid Versions earlier than equipment. subcell. BSC6900 V900R011
Radio
ENPREEMP TTRANSAD MT
BSC6900
Whether to support SET preempting BSCBASIC(Opti transmission onal) resources Whether to support SET transmission BSCBASIC(Opti resources onal) queuing
GBFD118605
IP QOS
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
ON
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
ENQUETRA NSADMT
GBFD118605
IP QOS
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
ON
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page94of316
150682621.xls.ms_office
Security Level:
ENSOVERL DTHRSH
BSC6900
If the load of the underlaid subcell is greater than this threshold, the period of the load-based handover from the underlaid subcell to the overlaid subcell, "UL Subcell Load Hierarchical HO Periods", is decreased by "MOD Step LEN of UL Load HO Period" every second to accelerate GBFDthe handover. 113201
0~100
per cent
None
80 Cell
This parameter is valid only when "UTOOTRAFHOALLOW" is set to YES. The following condition must be met: "ENSOVERLDTHRSH" > "ENGOVERLDTHRSH" > Read & "ENLOWLDTHRSH". Write
Not involved
Not involved
None
If this parameter is set to a greater value, the congestion relieving speed in the underlaid subcell is decreased. If this parameter is set to a smaller value, traffic The parameter modification load on the overlaid subcell is increased, has no impact on the and thus congestion may occur in the Versions earlier than equipment. overlaid subcell. BSC6900 V900R011
Radio
BSC6900
Whether to enable the cell to centralize two busy half rate TCHs in different timeslots into one timeslot through handover and then to combine the two idle half rate TCHs in the other timeslot into SET one full rate GCELLCHMGBA TCH GBFDSIC(Optional) dynamically 113402 M3UA local entity type. For the description of the ASP and IPSP, see RFC4666. None
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
If this parameter is set to NO, the forced handover and call delay caused by timeslot arrangement can be avoided, but this may cause some TCHF-only calls to fail. If this parameter is set to Yes, calls may The parameter modification fail when the timeslot arrangement fails has no impact on the and when the MS does not select the Versions earlier than equipment. TCHF in the concentric cell. BSC6900 V900R011
Radio
ENTITYT
BSC6900
ADD M3LE(Mandator y)
None
Enumeration Type
M3UA_ASP, M3UA_IPSP
M3UA_ASP, M3UA_IPSP
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
ENTITYT
BSC6900
ENUTOOLO ADINILEV
BSC6900
ADD M3DE(Mandator Destination y) entity type. None Initial signal level used to compute the handover zone for an MS during the hierarchical load-based handover from the underlaid subcell to the overlaid subcell of the SET enhanced GCELLHOIUO( concentric GBFDOptional) cell 113201 Return code of the command. If this parameter is specified, only the correspondin g record is displayed. If this parameter is not specified, GBFDthe return 111203 code is not MRFDconsidered. 210305 Whether to disable emergency calls. For the MSs of access levels 0 to 9, if the value of this parameter is NO, emergency calls are enabled. For the MSs of access levels 11 to 15, emergency calls are disabled only when the relevant access control bit is set to 0 and this parameter is GBFDset to YES. 110202
None
Enumeration Type
M3UA_SGP(M3 UA SGP), M3UA_IPSP(M3 UA IPSP), M3UA_SS7SP(M M3UA_SGP, 3UA SS7SP), M3UA_IPSP, M3UA_SP(M3UA M3UA_SS7SP, SP) M3UA_SP
None None
None
Negotiation with the peer BSC69 network element is Read & 00 required. Write
Not involved
Not involved
Not involved
None
Transpor t
0~63
dB
None
63 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell and "HOCTRLSWITCH" in "SET GCELLHOBASIC" is set to HOALGORITHM2.
Not involved
Not involved
None
If this parameter is set to a greater value, congestion in the underlaid subcell may not be relieved in time. If this parameter is set to a smaller value, many calls may be handed over from the underlaid subcell to The parameter modification the overlaid subcell in a shot period, thus has no impact on the causing network congestion in the overlaid Versions earlier than equipment. subcell and handover failure. BSC6900 V900R011
Radio
ERCODE
Return Code
BSC6900
EXP LOG(Optional)
1~4294967295
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
NO(No), YES(Yes) O1E3_R5E4(OC CUR:1E-3, RECOVERY:5E4), O5E4_R1E4(OC CUR:5E-4, RECOVERY:1E4), O1E4_R5E5(OC CUR:1E-4, RECOVERY:5E5), O5E5_R1E5(OC CUR:5E-5, RECOVERY:1E5), O1E5_R5E6(OC CUR:1E-5, RECOVERY:5E6), O5E6_R1E6(OC CUR:5E-6, RECOVERY:1E6)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
ERRALARM THD
BSC6900
SET ETHPORT(Optio nal) ADD PPPLNK(Option al) ADD Error-frame MPGRP(Optiona alarm l) threshold
None
None
Enumeration Type
Board
None
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
SET ETHPORT(Optio nal) ADD PPPLNK(Option al) ADD MPGRP(Optiona Error-frame l) detect switch None Differentiated service code SET of the BTSABISPRIMA specified P(Optional) ESL None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
Board
None
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
ESLDSCP
ESL DSCP
BSC6900
None
0~63
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
ESLPRI
ESL Priority
BSC6900
SET Service BTSABISPRIMA priority of the P(Optional) ESL None Priority of a service running over an extended signaling link (ESL). ESLs are used for more reliably transmitting SET important BSCSRVPRI(Op signaling GBFDtional) messages. 118605
None
0~7
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
ESLSP
BSC6900
IP QOS
0~7
None None
None
BSC69 00 None
Not involved
Not involved
None
Transpor t
ESLVLANID
ESL VlanId
BSC6900
SET BTSABISPRIMA Specified P(Optional) ESL Vlan Id End synchronizati EXP on number of ALMLOG(Option the alarm al) record Timer for the BSC waiting for an Establish Indication message after sending an Immediate Assignment message. If T3101 expires before the BSC receives an Establish Indication message, the BSS SET releases the GCELLTMR(Opt seized ional) SDCCH.
None
None
2~4094
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
essn
BSC6900
MRFD210304
Faulty Management
1~2147483646
None
2147483646
2147483646 RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD110502
500~60000
ms
None
None
Cell
None
Not involved
Not involved
None
If this timer is set to a greater value, channel resources may be wasted, thus causing congestion. The parameter modification If this timer is set to a smaller value, the has no impact on the success rate of immediate assignment equipment. may decrease.
Radio
6/9/2013
Page95of316
150682621.xls.ms_office
Security Level:
ESTINDL3M SGTAFLAG
Whether to add the TA value to a complete layer-3 message to provide the SET LCS function AITFOTHPARA( on the A GBFDOptional) interface 115403 When the OML is switched to a port where the connection is successfully established, the switchover cannot be performed over a certain period of time, which is specified as ring II rotating penalty time. In this manner, frequent switchover between the ports due to SET intermittent BTSRINGATTR( blinking can GBFDOptional) be avoided. 117802 SET TZ(Mandatory) End time of DST The operation time of the log record is prior to this time. If this parameter is not specified, the end time EXP is the current LOG(Optional) time. Time when the scheduled subtask is stopped. If the time mode is set to "DAILY_T", "WEEKLY_T ", or "MONTHLY_ T", you ADD should set SUBTSK(Mandat this ory) parameter. Execution mode of the commands 1. ONE_BY_O NE: indicating that the commands are executed one bye one according to the execution sequence. Only one command can be executed once. 2. PARALLEL: indicating that multiple commands are executed in parallel. Multiple commands RUN can be BATCHFILE(Opti executed onal) once. The operation time of the log record is prior to this time. If this parameter is not specified, the end time COL is the current LOG(Optional) time. End time of the alarm record. By EXP default, the ALMLOG(Option end time is al) 23:59:59. End time of the alarm record. By STA default, the ALMLOG(Option end time is al) 23:59:59. MRFD210301
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
CLOSE
MSC
None
Not involved
Not involved
None
Radio
ESTTIME
BSC6900
Fast Ring Network Switch Interval Type 0~255 Configuration Management Compound Type HOUR, MIN, SEC
0~255
None
None
BTS
None
Not involved
Not involved
None
ET
EndTime
BSC6900
None None
None
BSC69 00 None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
ET
End Time
BSC6900
GBFD111203 MRFD210305
Compound Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
ET
End Time
BSC6900
GBFD111203
O&M of BSC
Compound Type
hour, min
00:00~23:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
ET
Execute Type
BSC6900
GBFD111203
O&M of BSC
Enumeration Type
ONE_BY_ONE(E xecute one bye one), PARALLEL(Paral ONE_BY_ONE, lel Execute) PARALLEL
None None
ONE_BY_ONE
RNC
None
Not involved
Not involved
None
Equipme nt
ET
End Time
BSC6900
GBFD111203 MRFD210305
Compound Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
et
End Time
BSC6900
MRFD210304
Faulty Management
Compound Type
00:00:00~23:59:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
et
End Time
BSC6900
MRFD210304
Faulty Management
Compound Type
00:00:00~23:59:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
ET
End time
BSC6900
End date and time of a broadcast message. This is a key parameter for identifying a simple cell broadcast message. You can use "DSP GSMSCB" to query and obtain the value of this GBFDparameter. 113602 End date of the user operation. GBFDInput format: 111203 YYYY&MM& MRFDDD 210305 GBFD111202
Compound Type
None None
None
Cell
None
Not involved
Not involved
None
Radio
ETD
End Date
BSC6900
ETIME
End Time
BSC6900
None None
None
RNC
None
Not involved
Not involved
None
O&M of BTS
00:00:00~23:59:59
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt Equipme nt
BSC6900 V900R011
ETP
Log Type
BSC6900
EXP LOG(Optional)
Type of the log to be queried. The result is GBFDdisplayed by 111203 the specified MRFDtype. 210305 End time of the user operation. The input format of this parameter is HH&MM&SS.
Enumeration Type
LOGINEVENT(L oginEvent), MANAGEEVENT (ManageEvent), AUTHEVENT(Aut LOGINEVENT, hEvent), MANAGEEVENT, OTHEREVENT( AUTHEVENT, OtherEvent) OTHEREVENT
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
ETT
End Time
BSC6900
ADD OP(Mandatory)
GBFD111203 MRFD210305
Compound Type
00:00:00~23:59:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
EWEEK
End week
BSC6900
SET TZ(Mandatory)
Configuration Management
Enumeration Type
SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesda y), THU(Thursday), SUN, MON, TUE, FRI(Friday), WED, THU, FRI, SAT(Saturday) SAT FIRST(First), SECOND(Secon d), THIRD(Third), FIRST, SECOND, FOURTH(Fourth) THIRD, FOURTH, , LAST(Last) LAST
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
EWSEQ
BSC6900
SET TZ(Mandatory)
Sequence of the end week MRFDof DST 210301 Upper limit of extended output analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of this parameter is MRFDA. 210301
Configuration Management
Enumeration Type
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Configuration Management
String Type
None
1~9 characters
V or A
0.02 None
None
If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of "Upper Limit of Signal Output of External Analog 1" is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of "Upper Limit of Signal Output of External Read & Analog 1" is A. Write
Not involved
Not involved
None
Equipme nt
6/9/2013
Page96of316
150682621.xls.ms_office
Security Level:
BSC6900
ADD EMU(Optional)
BSC6900
ADD EMU(Optional)
Lower limit of extended output analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of this parameter is A. Sensor type of extended analog signal 1
MRFD210301
Configuration Management
String Type
MRFD210301
Configuration Management
Enumeration Type
V or A
0.004 None
None
If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of "Lower Limit of Signal Output of External Analog 1" is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of "Lower Limit of Signal Output of Read & External Analog 1" is A. Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
None CURRENT
None
None
None
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Maximum measurement range of extended analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of this parameter is MRFDA. 210301 Minimum measurement range of extended analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of this parameter is MRFDA. 210301 Upper limit of extended output analog signal 2. If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of this parameter is MRFDA. 210301 Lower limit of extended output analog signal 2. If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of this parameter is MRFDA. 210301 Sensor type of extended analog signal MRFD2 210301 Maximum measurement range of extended analog signal 2. If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of this parameter is MRFDA. 210301 Minimum measurement range of extended analog signal 2. If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of this parameter is MRFDA. 210301 Upper limit of extended output analog signal 3. If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of this parameter is MRFDA. 210301
Configuration Management
String Type
None
1~9 characters
V or A
100 None
None
If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of "Upper Limit of Measurement Range of External Analog 1" is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of "Upper Limit of Measurement Range of Read & External Analog 1" is A. Write
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Configuration Management
String Type
None
1~9 characters
V or A
0 None
None
If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of "Lower Limit of Measurement Range of External Analog 1" is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of "Lower Limit of Measurement Range of Read & External Analog 1" is A. Write
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Configuration Management
String Type
None
1~9 characters
V or A
0.02 None
None
If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of "Upper Limit of Signal Output of External Analog 2" is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of "Upper Limit of Signal Output of External Read & Analog 2" is A. Write
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Configuration Management
String Type
BSC6900
ADD EMU(Optional)
Configuration Management
Enumeration Type
V or A
0.004 None
None
If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of "Lower Limit of Signal Output of External Analog 2" is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of "Lower Limit of Signal Output of Read & External Analog 2" is A. Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
None CURRENT
None
None
None
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Configuration Management
String Type
None
1~9 characters
V or A
100 None
None
If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of "Upper Limit of Measurement Range of External Analog 2" is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of "Upper Limit of Measurement Range of Read & External Analog 2" is A. Write
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Configuration Management
String Type
None
1~9 characters
V or A
0 None
None
If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of "Lower Limit of Measurement Range of External Analog 2" is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of "Lower Limit of Measurement Range of Read & External Analog 2" is A. Write
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Configuration Management
String Type
None
1~9 characters
V or A
0.02 None
None
If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of "Upper Limit of Signal Output of External Analog 3" is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of "Upper Limit of Signal Output of External Read & Analog 3" is A. Write
Not involved
Not involved
None
Equipme nt
6/9/2013
Page97of316
150682621.xls.ms_office
Security Level:
BSC6900
ADD EMU(Optional)
BSC6900
ADD EMU(Optional)
Lower limit of extended output analog signal 3. If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of this parameter is A. Sensor type of extended analog signal 3
MRFD210301
Configuration Management
String Type
MRFD210301
Configuration Management
Enumeration Type
V or A
0.004 None
None
If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of "Lower Limit of Signal Output of External Analog 3" is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of "Lower Limit of Signal Output of Read & External Analog 3" is A. Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
None CURRENT
None
None
None
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Maximum measurement range of extended analog signal 3. If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of this parameter is MRFDA. 210301 Minimum measurement range of extended analog signal 3. If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of this parameter is MRFDA. 210301 Upper limit of extended output analog signal 4. If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of this parameter is MRFDA. 210301 Lower limit of extended output analog signal 4. If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of this parameter is MRFDA. 210301 Sensor type of extended analog signal MRFD4 210301 Maximum measurement range of extended analog signal 4. If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of this parameter is MRFDA. 210301
Configuration Management
String Type
None
1~9 characters
V or A
100 None
None
If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of "Upper Limit of Measurement Range of External Analog 3" is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of "Upper Limit of Measurement Range of Read & External Analog 3" is A. Write
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Configuration Management
String Type
None
1~9 characters
V or A
0 None
None
If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of "Lower Limit of Measurement Range of External Analog 3" is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of "Lower Limit of Measurement Range of Read & External Analog 3" is A. Write
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Configuration Management
String Type
None
1~9 characters
V or A
0.02 None
None
If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of "Upper Limit of Signal Output of External Analog 4" is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of "Upper Limit of Signal Output of External Read & Analog 4" is A. Write
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Configuration Management
String Type
BSC6900
ADD EMU(Optional)
Configuration Management
Enumeration Type
V or A
0.004 None
None
If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of "Lower Limit of Signal Output of External Analog 4" is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of "Lower Limit of Signal Output of Read & External Analog 4" is A. Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
None CURRENT
None
None
None
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Configuration Management
String Type
None
1~9 characters
V or A
100 None
None
If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of "Upper Limit of Measurement Range of External Analog 4" is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of "Upper Limit of Measurement Range of Read & External Analog 4" is A. Write
Not involved
Not involved
None
Equipme nt
BSC6900
EXCACC
Exclusive Access
BSC6900
BSC6900
Minimum measurement range of extended analog signal 4. If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of this ADD parameter is EMU(Optional) A. Whether it is a SoLSA exclusive access cell. If it is a SoLSA exclusive access cell, only the MS subscribing the Localised Service Area SET (LSA) can GCELLSERVPA access this RA(Optional) cell. Received signal strength at an MS expected in power forecast, which helps to compute the initial SET transmit GCELLPWRBAS power of the IC(Optional) BTS
MRFD210301
Configuration Management
String Type
None
1~9 characters
V or A
0 None
None
If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of "Lower Limit of Measurement Range of External Analog 4" is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of "Lower Limit of Measurement Range of Read & External Analog 4" is A. Write
Not involved
Not involved
None
Equipme nt
GBFD114101
GPRS
Enumeration Type
None None
NoExclusive
Cell
None
Not involved
Not involved
None
Radio
GBFD117602
0~63
dB
None
30 Cell
Not involved
Not involved
None
If this parameter is set to a greater value, the effectiveness of power control is reduced, and thus the network interference can not be reduced The parameter modification effectively. If this parameter is set to a has no impact on the smaller value, call drops may occur due to Versions earlier than equipment. excessive power control. BSC6900 V900R011
Radio
6/9/2013
Page98of316
150682621.xls.ms_office
Security Level:
BSC6900
Received signal strength at the BTS expected in power forecast, which helps to compute the initial SET transmit GCELLPWRBAS power of an IC(Optional) MS
GBFD117602
0~63
dB
None
30 Cell
Not involved
Not involved
None
If this parameter is set to a greater value, the effectiveness of power control is reduced, and thus the network interference can not be reduced The parameter modification effectively. If this parameter is set to a has no impact on the smaller value, call drops may occur due to Versions earlier than equipment. excessive power control. BSC6900 V900R011
Radio
BSC6900
BSC6900
ID of the cell. The cell ID cannot conflict with other cell IDs in the BSC. The cells in the BSC are numbered MRFDsequentially. 210301 Name of the cell GBFD111202
Configuration Management
2048~5047
None None
None
Not involved
Not involved
None
O&M of BTS
String Type
None
1~64 characters
None None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
BSC6900
BSC6900
ID of the cell. The cell ID cannot conflict with other cell IDs in the BSC. The cells in the BSC are numbered MRFDsequentially. 210301 Name of the cell GBFD111202
Configuration Management
5048~8047
None None
None
Not involved
Not involved
None
O&M of BTS
String Type
None
1~64 characters
None None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
Index of the ADD cell in the EXTNCELL(Man adjacent datory) BSC. Name of the ADD cell in the EXTNCELL(Man adjacent datory) BSC.
MRFD210301
Configuration Management
2048~5047
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
MRFD210301
Configuration Management
String Type
None
1~64 characters
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
BSC6900
Whether to support the downlink throughput enhancement function of the dual timeslot cell. When this switch is turned on, the system can allocate the packet downlink channel of the odd number timeslot of SET dual timeslot GCELLPSOTHE bearer of the RPARA(Optional dual timeslot GBFD) cell. 114001 Whether to enable alarm SET extension BTSALM(Option input for the GBFDal) BTS 111202 Whether the network requires an MS to send GBFDSET an extension 110801 GCELLEXTMSR measurement GBFDPARA(Optional) report 110802
Extended Cell
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
CLOSE
Cell
None
Cell
None
Radio
EXTFlag
O&M of BTS
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
EXTMEASO RD
BSC6900
EM0(EM0), EM1(EM1)
EM0, EM1
None None
EM0
Cell
None
Not involved
Not involved
None
Radio
BSC6900
BSC6900
Time interval between two SET extension GCELLEXTMSR measurement PARA(Optional) reports Type of an extension measurement report. There are three types of extension measurement reports: type 1, type 2, and type 3. Type 1: No matter whether the BSIC was decoded, the MS sends the network a measurement report on the six strongest TRXs. The measurement report contains the received signal level and the decoded BSIC. SET Type 2: The GCELLEXTMSR MS sends PARA(Optional) the network
GBFD110801 GBFD110802
60sec(60sec), 120sec(120sec), 240sec(240sec), 480sec(480sec), 960sec(960sec), 1920sec(1920se c), 3840sec(3840se 60sec, 120sec, c), 240sec, 480sec, 7680sec(7680se 960sec, 1920sec, c) 3840sec, 7680sec
None
None
Cell
None
Not involved
Not involved
If the value of this paramete r is too small, extension measure ment reports are sent frequentl y. If the value is too large, feedback informati on may not be sent promptly in fewer extension measure The parameter modification ment has no impact on the reports. equipment. None
Radio
GBFD110801 GBFD110802
None None
None
Cell
None
Not involved
Not involved
None
Radio
EXTTP
BSC6900
Whether a cell is an extension cell. A doubletimeslot extension cell regards an additional TDMA frame as access delay extension. In theory, the supported TA value is 219, that is, a time ADD delay of GCELL(Optional about 120 GBFD) kilometers. 114001
Extended Cell
Enumeration Type
Normal_cell, DaulTst_ExtCell
None None
Normal_cell
Cell
None
Cell
None
None
Radio
Not Send Dummy Message with EXTUTBFNO Extended Uplink DATA TBF
BSC6900
BSC6900
Whether to send the Dummy message during the deactivated SET period of the GCELLPSBASE( extended Optional) uplink TBF. Interval of sending a paging message or notification message on the FACCH. Messages on the FACCH are sent in the mode of speech frame stealing. A large number of consecutive stolen speech frames may affect the voice quality and even lead to no voice. Therefore, the BTS must control the time interval of sending a paging or SET notification GCELLGSMR(O message on ptional) the FACCH
GBFD119203
Enumeration Type
SEND, NOTSEND
None None
SEND
Cell
If "UPEXTTBFINACTDELA Y" in the "SET GCELLPRIVATEOPTPA RA" command is set to 0, "EXTUTBFNODATA" must be 0. If "UPEXTTBFINACTDELA Y" is not set to 0, "EXTUTBFNODATA" can Read & be 0 or 1. Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
GBFD510301 GBFD510302
0~255, step: 50
ms
None
8 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page99of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether to allow sending notification messages on the FACCH. If the value of this parameter is YES, an MS engaged in a point-to-point call can receive a notification message for a group call. You can interrupt the SET existing call GCELLGSMR(O and join the GBFDptional) group call. 510307 Whether to allow sending paging messages on the FACCH. If the value of this parameter is YES, an MS can receive a paging message on the group call channel. You can leave the group call SET and respond GCELLGSMR(O to the paging GBFDptional) message. 510307 SET BTSABISPRIMA Activation P(Optional) factor switch None If this parameter is set to ON, the BSC assigns the channels in the TRXs of the cell in a polling manner. Therefore, each TRX has an even chance to be used. In this way, the connection between the TRX and the RF can be checked SET without GCELLCHMGBA manual GBFDSIC(Optional) dialing tests. 111005 Penalty signal level imposed on a target cell to which the handover fails due to congestion or poor radio quality. This penalty helps to prevent the MS from making a second handover attempt to the target cell. Continuous speed adjustment Discrete speed adjustment Duty ratiobased speed adjustment Fan adjustment mode
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
BSC6900
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
None
OFF, ON
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Transpor t
BSC6900
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
None
Cell
None
Not involved
Not involved
None
Radio
FAILSIGSTR Penalty Level after PUNISH HO Fail Continuous FANADJUST adjustment COMMAND0 command Discrete FANADJUST adjustment COMMAND1 command Duty ratio FANADJUST adjustment COMMAND2 command FANADJUST Fan adjustment MODE mode
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
FANFLAG
Fan Type
BSC6900
SET GCELLHOFITPE N(Optional) SET FANSPEED(Opti onal) SET FANSPEED(Opti onal) SET FANSPEED(Opti onal) SET FANSPEED(Opti onal) SET FANSPEED(Man Type of the datory) fan
HUAWEI I Handover HUAWEI II Handover Configuration Management Configuration Management Configuration Management Configuration Management Configuration Management
Interval Type 0~63 Enumeration Type Enumeration Type PLUS_1, MINUS_1 HIGH_SPEED, LOW_SPEED
0~63
dB
None
30 Cell
None
Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write
Not involved
Not involved
None
None None
None
Not involved
Not involved
None
None None
None
Not involved
Not involved
None
Interval Type 55~100 CONTINUOUS, Enumeration DISCRETE, Type DUTY_RATIO Enumeration Type NORMAL_FAN, IND_FAN NO_SPEED_AD JUSTMENT, HW_AUTO_TEM PERATURE_CO NTROL, SPECIFY_RATE , SOFTWARE_CO NTROL IND_FAN(Indepe ndent Fan), NORMAL_FAN(N ormal Fan)
None None
None
Not involved
Not involved
None
None None
None
Not involved
Not involved
None
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
If this parameter is set to a greater value, call drops may occur due to no suitable neighboring cell for handover. If this parameter is set to a smaller value, handover success rate may be Versions earlier than decreased. BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
None
None
None
None
None
FANSPEED MODE
BSC6900
MRFD210301
Configuration Management
Enumeration Type
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The board should be reset to validate the parameter modification.
Equipme nt
FANTYPE
FanBox Type
BSC6900
MRFD210301
Configuration Management
Enumeration Type
IND_FAN, NORMAL_FAN
None None
None
None
None
Not involved
Not involved
None
None
BSC6900 V900R011
Equipme nt
BSC6900
After a channel request message is received, the type of the channel needs to be specified. In this case, if the threshold of the load on the TCH in the current cell is smaller than Fast Call Setup TCH Usage Threshold and the request message is not issued during location update or paging, a SET TCH is GCELLBASICPA preferentially RA(Optional) assigned. None
None
0~100
per cent
None
0 Cell
BSC6900
Ring II function switch. The parameter should be set to "YES" SET when the ring BTSRINGATTR( II function is GBFDOptional) enabled. 117802 Whether to enable the memory selfSET check and TCPARA(Option self-healing GBFDal) function 111203 Whether to send and process the flow control frame on the physical layer. The setting of this parameter must be negotiated with that on SET the ETHPORT(Optio interconnecte nal) d side. None If the parameter is set to "YES", it indicates that some data packets are discarded to ensure the basic functions of the BTS are not affected when the FE port is overloaded. After the port is not overloaded, SET the flow BTSETHPORT( control is GBFDOptional) stopped. 118601
NO(No), YES(Yes)
NO, YES
None None
None
BTS
Read & None Write If this parameter is set to "YES", the following condition must be met: The setting of this parameter must meet the following condition: "FallBack Start Time" > "Ring II Wait Time Before Switch" + "Ring II Try Rotating Duration Time". If this parameter is set to "NO", the following condition must be met: "FallBack Start Time" > "Ring I Wait Time Before Switch" + "Ring I Try Rotating Read & Duration Time". Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
Not involved
Not involved
None
Radio
BSC6900
O&M of BSC
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
OFF
Board
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
FC
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
Not involved
Not involved
None
Transpor t
FC
Flow Control
BSC6900
Abis over IP
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
None
BTS
None
Not involved
Not involved
None
Radio
6/9/2013
Page100of316
150682621.xls.ms_office
Security Level:
FCETHD
BSC6900
Threshold for stopping RSL flow control. If the occupancy of the LAPD queue is less than this SET threshold, the GTRXFC(Option BSC stops GBFDal) flow control. 111705
0~100
None None
None
TRX
None
Not involved
Not involved
None
Equipme nt
FCINDEX
BSC6900
None
None
0~1999
None None
None
Board
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
FCINDEX
BSC6900
None
None
0~1999
None None
None
Not involved
Not involved
Not involved
None
Transpor t
FCINDEX
BSC6900
GBFD118611 GBFD118622
0~1999
None
PPP 0 link
None
BSC6900
Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None
Transpor t
FCINDEX
BSC6900
GBFD118611 GBFD118622
0~1999
None
MP 0 group
None
Not involved
Not involved
Transpor t
FCINDEX
BSC6900
ADD Flow control IPLOGICPORT( parameter Optional) index ADD PORTFLOWCT Flow control RLPARA(Mandat parameter ory) index
None
None
0~1999
None
IP logical 0 port
This index can correspond with any threshold (maximum value of 80) in the six queues. The following condition must be met: threshold x 64 x 1024 x logical port bandwidth < 4294967295(0xFFFFFFF Read & F). Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
FCINDEX
BSC6900
None
None
10~1999
None None
None
BSC69 00 None
Not involved
Not involved
None
Transpor t
FCINDEX
BSC6900
MRFD210103
Link aggregation
0~1999
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
FCINDEX
BSC6900
SET Flow control BTSABISPRIMA parameter P(Mandatory) index ADD Cabinet No. BTSAUTOPLAN( of the father Mandatory) BTS
None
FCN
BSC6900
GBFD510701
2~1999
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
0~62
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
FCN
BSC6900
GBFD111202
O&M of BTS
0~62
None None
None
BTS
None
BTS
This paramete r can be modified only when the BTS is The BTS should be reset to deactivat validate the parameter ed. modification. None
Radio
FCSTHD
BSC6900
Threshold for starting RSL flow control. If the occupancy of the LAPD queue is greater than this SET threshold, the GTRXFC(Option BSC starts GBFDal) flow control. 111705
0~100
per cent
None
None
TRX
None
Not involved
Not involved
None
Equipme nt
FCSTYPE
BSC6900
GBFD118611 GBFD118622
Enumeration Type
None 16bit
16bit
PPP link
None
PPP link
Negotiati on fails if this paramete The parameter modification r is has no impact on the modified. equipment. None Negotiati on fails if this paramete The parameter modification r is has no impact on the modified. equipment. None
Transpor t
FCSTYPE
BSC6900
GBFD118611 GBFD118622
Enumeration Type
None 16bit
16bit
MP link None
BSC6900
Transpor t
FCSW
FCV
Float-Charging Voltage
BSC6900
Flow control switch. Other switches are valid only when "Flow SET control FCSW(Mandator switch" is WRFDy) "ON". 040100 Float charging voltage. Float charging compensates the discharged capacity of the battery so that the battery can be charged to full voltage indefinitely. The value of this parameter is slightly lower than the even charging voltage. See the vendor specification for the setting of this parameter. In multi-mode scenario, the value of this parameter in this mode SET must be the BTSAPMUBP(O same as the GBFDptional) value of the 111202 Input mode of the BA lists. AUTO: In this mode, the system fills in the BA1 and BA2 lists according to neighboring relations of cells. MANU: In this mode, you can maintain the BA tables by yourself. If the neighboring relations of cells are changed, for example, after a neighboring cell is added or deleted, you must maintain the SET BA1 and BA2 GCELLIDLEFDD lists by GBFDBA1(Mandatory) yourself. 114301 This parameter indicate whether to generate the FDD BA2 table automatically according to neighbor cell relations or to input the SET FDD BA2 GCELLHOFDDB table MRFDA2(Mandatory) manually 210301
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None None
None
None
None
Not involved
Not involved
None
Equipme nt
O&M of BTS
None
535 BTS
The value of this parameter must be smaller than "Even charging voltage" and at least two volts higher than "DC undervoltage alarm threshold".
Not involved
Not involved
None
Equipme nt
GSM/WCDMA Interoperability
Enumeration Type
AUTO(Auto), MANU(Manu)
AUTO, MANU
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Configuration Management
Enumeration Type
AUTO(Auto), MANU(Manu)
AUTO, MANU
None None
None
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page101of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
Offset of a FDD cell report. When the priority of a 3G cell is sequenced, the value of this parameter be added to the receive level of the 3G cell in the measurement report. The values of this parameter correspond to the following decibel values: 0: 0 dB 1: 6 dB ... 7: 42 dB Threshold of a FDD cell report. When the receive level value in the measurement report about a 3G cell exceeds the value of this parameter, the measurement report takes effect. After the valid measurement report is filtered, the 3G cell joins the cell priority sequence. The values of this parameter correspond to the following decibel values: 0: 0 dB 1: 6 dB Diversity indication of a 3G cell. This parameter indicates whether the transmit diversity mode on the common channel in a cell is activated.
GBFD114301
GSM/WCDMA Interoperability
0~7, step: 6
dB
None
None
Cell
None
Not involved
Not involved
None
Radio
GBFD114301
GSM/WCDMA Interoperability
0~7, step: 6
dB
None
None
Cell
None
Not involved
Not involved
None
Radio
GBFD114301
GSM/WCDMA Interoperability
0~1
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
FDDECQUA LTHRSH
BSC6900
Downlink frequency number that an MS in the connected mode retrieves from the 3G neighboring cell list. The numbers are sent through system message 2QUATER/M I. The value ranges of frequency numbers vary with SET correspondin GCELLIDLEFDD g band GBFDBA1(Mandatory) reporting. 114301 Minimum ADD Ec/No of the GEXT3GCELL( 3G FDD cell GBFDOptional) candidate 114301 Number of UTRAN FDD cells that should be SET included in GCELLCCUTRA measurement GBFDNSYS(Optional) report 114301 One of the thresholds of the signal level for 3G cell reselection. A 3G cell can be a candidate for cell reselection only when the receive level of the 3G cell is greater than the value of this parameter. The values 0 to 7 of this parameter corresponds respectively to the following decibel values: 20dB, -6dB, 18dB, -8dB, SET 16dB, -10dB, GCELLCCUTRA -14dB, and - GBFDNSYS(Optional) 12dB. 114301 Diversity transmitter 32QAM delay. Only the doubletransceiver BTS and the subsequent distributed BTS support the function of transmit diversity delay. Therefore, this parameter applies to only the BTS of these two types. For the BTS of other types, this parameter is SET set to an GCELLCCUTRA invalid value GBFDNSYS(Optional) 255. A 3G cell can 114301 be a candidate cell only when the average receive level of the 3G cell is greater than the value of this parameter of the current serving cell. The values of this parameter correspond to the following decibel values: 0: - (always select a cell if acceptable) 1: -28 dB SET 2: -24 dB GCELLCCUTRA ... GBFDNSYS(Optional) 15: 28 dB 114301 Measuremen t mode of a measurement report on a FDD cell. Ec/N0: using the signal-tonoise ratio RSCP: using SET the received GCELLCCUTRA signal code GBFDNSYS(Optional) power 114301
GSM/WCDMA Interoperability
0~16383
None None
None
Cell
None
Not involved
Not involved
The value ranges of frequenc y numbers vary with correspo nding The parameter modification band has no impact on the reporting. equipment. None The parameter modification has no impact on the equipment. None
Radio
GSM/WCDMA Interoperability
0~49
dB
None
10 Cell
None
Not involved
Not involved
None
Radio
FDDFREQC NUM
BSC6900
GSM/WCDMA Interoperability
0~3
None None
None
Cell
None
Not involved
Not involved
None
Radio
FDDQMIN
FDD Qmin
BSC6900
GSM/WCDMA Interoperability
0~7
dB
None
None
Cell
None
Not involved
Not involved
None
Radio
FDDQMINO FFSET
BSC6900
GSM/WCDMA Interoperability
0~7
dB
None
0 Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
FDDQOFF
FDD Q Offset
BSC6900
GSM/WCDMA Interoperability
0~15
dB
None
None
Cell
None
Not involved
Not involved
None
Radio
FDDREP
BSC6900
GSM/WCDMA Interoperability
Enumeration Type
RSCP(RSCP), EcN0(Ec/N0)
RSCP, EcN0
None None
None
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page102of316
150682621.xls.ms_office
Security Level:
BSC6900
Minimum level threshold of UTRAN cell reselection. During the cell reselection decision from a GSM cell to a FDD cell, this parameter is used to calculate the RSCP threshold of the target cell. The values of this parameter correspond to the following decibel values: 0 = 114 dBm, 1 = -112 dBm, 2 = -110 dBm, SET ... GCELLCCUTRA 14 = -86 GBFDNSYS(Optional) dBm, 114301 Minimum RSCP of the 3G FDD cell candidate Scrambling code of a 3G cell, used for distinguishing MSs or cells. Scrambling codes are used after spreading. Therefore, the bandwidth of a signal is not changed. Instead, signals from different sources are differentiated . Scrambling prevents multiple transmitters from using the same code word for spreading. On the uplink, the scrambling SET function is GCELLIDLEFDD used for BA1(Mandatory) differentiating ADD GEXT3GCELL( Optional)
GSM/WCDMA Interoperability
0~15
dBm None
6 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
FDDRSCPQ UALTHRSH
BSC6900
GBFD114301
GSM/WCDMA Interoperability
0~63
None None
10 Cell
None
Not involved
Not involved
None
Radio
FDDSCRAM BLE
Scrambling Code
BSC6900
GBFD114301
GSM/WCDMA Interoperability
0~511
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
FERRPTEN
BSC6900
Number of CPU usage sampling times for fast judgment. The value of this parameter must be of half size of SET "Filter FCCPUTHD(Opti window" or WRFDonal) smaller. 040100 Whether the BTS reports the frame erase ratio in a measurement report or preprocesse SET d GCELLSOFT(O measurement GBFDptional) report 116801 If the FER carried in the measurement report (MR) received is lower than or equal to "FER threshold 1", the value of "FER 0 and Quality Level N" is incremented by one. If the FER in the MR received is greater than "FER threshold 1" but meanwhile lower than or equal to "FER threshold 2", the value of "FER 1 and Quality Level SET N" is GCELLOTHEXT( incremented GBFDOptional) by one. 116801 If the FER carried in the MR received is greater than "FER threshold 2" but meanwhile lower than "FER threshold 3", the value of "FER 2 and Quality Level SET N" is GCELLOTHEXT( incremented GBFDOptional) by one. 116801 If the FER carried in the MR received is greater than "FER threshold 3" but meanwhile lower than "FER threshold 4", the value of "FER 3 and Quality Level SET N" is GCELLOTHEXT( incremented GBFDOptional) by one. 116801 If the FER carried in the MR received is greater than "FER threshold 4" but meanwhile lower than "FER threshold 5", the value of "FER 4 and Quality Level SET N" is GCELLOTHEXT( incremented GBFDOptional) by one. 116801 If the FER carried in the MR received is greater than "FER threshold 5" but meanwhile lower than "FER threshold 6", the value of "FER 5 and Quality Level SET N" is GCELLOTHEXT( incremented GBFDOptional) by one. 116801
Flow Control
1~1000
None None
4 None
None
Not involved
Not involved
None
Equipme nt
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
For the doubletransceiver BTS and NGBTS, the default value is NO; for other BTS, this parameter is invalid.
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
0~1000
per mill
None
2 Cell
None
Not involved
Not involved
None
The parameter modification This parameter affects only the statistical has no impact on the result of the counter "FER I (I = 0-7) equipment. Quality Level N".
BSC6900 V900R011
Radio
BSC6900
0~1000
per mill
None
4 Cell
None
Not involved
Not involved
None
The parameter modification This parameter affects only the statistical has no impact on the result of the counter "FER I (I = 0-7) equipment. Quality Level N".
BSC6900 V900R011
Radio
BSC6900
0~1000
per mill
None
8 Cell
None
Not involved
Not involved
None
The parameter modification This parameter affects only the statistical has no impact on the result of the counter "FER I (I = 0-7) equipment. Quality Level N".
BSC6900 V900R011
Radio
BSC6900
0~1000
per mill
None
16 Cell
None
Not involved
Not involved
None
The parameter modification This parameter affects only the statistical has no impact on the result of the counter "FER I (I = 0-7) equipment. Quality Level N".
BSC6900 V900R011
Radio
BSC6900
0~1000
per mill
None
32 Cell
None
Not involved
Not involved
None
The parameter modification This parameter affects only the statistical has no impact on the result of the counter "FER I (I = 0-7) equipment. Quality Level N".
BSC6900 V900R011
Radio
6/9/2013
Page103of316
150682621.xls.ms_office
Security Level:
BSC6900
If the FER carried in the MR received is greater than "FER threshold 6" but meanwhile lower than "FER threshold 7", the value of "FER 6 and Quality Level SET N" is GCELLOTHEXT( incremented GBFDOptional) by one. 116801 If the FER carried in the MR received is greater than "FER threshold 7", the value of "FER 7 and Quality Level SET N" is GCELLOTHEXT( incremented GBFDOptional) by one. 116801
0~1000
per mill
None
64 Cell
None
Not involved
Not involved
None
The parameter modification This parameter affects only the statistical has no impact on the result of the counter "FER I (I = 0-7) equipment. Quality Level N".
BSC6900 V900R011
Radio
BSC6900
0~1000
per mill
None
128 Cell
None
Not involved
Not involved
FHMODE
Frequency hopping mode. Frequency SET hopping GCELLHOPTP( assists in Optional) interference SET averaging GCELLHOPQUI and CKSETUP(Mand frequency atory) diversity. The file name cannot contain the path and suffix, and suffix is automatically added. The file name is composed of English letters, numerals, and common symbols, and the characters (@, #, !, %, ^, &, *, [, ], /, \, ', and ") cannot appear in the file name.
GBFD113701
Enumeration Type
NO_FH(No frequency hopping), BaseBand_FH(B aseband frequency hopping), RF_FH(RF frequency hopping), Hybrid_FH(Hybri NO_FH, d frequency BaseBand_FH, hopping) RF_FH, Hybrid_FH
None None
None
Cell
None
Cell
None Before you set this paramete r, deactivat e the cell. After you set this paramete r, activate the cell.
The parameter modification This parameter affects only the statistical has no impact on the result of the counter "FER I (I = 0-7) equipment. Quality Level N".
BSC6900 V900R011
Radio
None
Radio
FILE
File Name
BSC6900
EXP LOG(Optional)
FILE
BSC6900
ZIP Path of the FILE(Mandatory) target file Name of the backup file. The file name is composed of English letters, numerals, and common symbols, and the characters (@, #, !, %, ^, &, *, [, ], /, \, ', and ") cannot appear in the file name. Path to save the exported file. The path must be a valid path on the OMU server. If the OMU runs the LINUX system, the input path must start with the symbol "/" or "\", for example, "/mml". If the OMU runs the WINDOWS system, the input path can be a full path (for example, "D:\mml") or a relative path (for example, "/mml"). If the relative path is used, the root directory is Type of the alarm log file to be exported Filter Type Of Frame Log
String Type
None
1~128 characters
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
String Type
None
1~200 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
FileName
File Name
BSC6900
BKP LOGDB(Optional )
GBFD111203 MRFD210305
String Type
None
0~200 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
FILEPATH
BSC6900
EXP CFGMML(Optio nal) EXP GCELLTEMPLA TE(Optional) EXP ALMLOG(Option al) SET LOGCFG(Option al)
filetype
BSC6900
String Type
None
0~128 characters
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
.txt file
RNC
None
Not involved
Not involved
None
Equipme nt Equipme nt
FILTERKEY
BSC6900
None None
None
RNC
None
Not involved
Not involved
None
BSC6900 V900R011
Number of forward values when the signal strength of the neighboring cell is processed on the average measurement report. The greater the value, the greater the weight of the previous circuit level; otherwise, the greater SET the weight of GCELLNC2PAR the current GBFDA(Optional) circuit level. 116201 Execution result. If you select "FALSE", only the records of failed operations are displayed. If you select "TRUE", only the records of successful operations are displayed. If this parameter is not specified, all the EXP records are LOG(Optional) displayed. Whether to enable 0.2 dB downlink power control. This power control function SET improves the GCELLPWR3(O power ptional) control
0~32
None None
6 Cell
None
Not involved
Not involved
None
Radio
FIN
Final
BSC6900
GBFD111203 MRFD210305
Enumeration Type
FALSE(Failed), TRUE(Succeed)
FALSE, TRUE
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD117601
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
FIRESET
Fire-extinguishing Equipment
BSC6900
Whether to start the fireextinguishing equipment of the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSOUTPUT(Op in another GBFDtional) mode. 111202
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page104of316
150682621.xls.ms_office
Security Level:
BSC6900
This parameter specifies the static Abis resource load threshold. If the static Abis resource load is less than the static Abis resource load threshold, the TCHF is preferentially allocated. Otherwise, whether the TCHF or the TCHH should be preferentially allocated is determined SET by the BTSFLEXABISP dynamic Abis GBFDARA(Optional) resource 117301 Time threshold for delaying the report of a clear alarm. If the alarm recurs within the time specified by this parameter after it is cleared, the clear alarm is not reported. Otherwise, the clear alarm is reported. If this parameter is set to 0, the clear alarm is reported immediately when the alarm is MRFDcleared. 210304 Time threshold for delaying the report of an alarm. If the alarm is cleared within the time specified by this parameter, the alarm is not reported. Otherwise, the alarm is reported. If this parameter is set to 0, the alarm is reported immediately when the MRFDalarm occurs. 210304 Whether to enable the filtering of the intermittent alarms. If the value of this parameter is "DISABLE", "Flash Statis Alarm Raise Time Window" and "Flash Statis Alarm Clear Time" are MRFDinvalid. 210304
Flex Abis
0~100
per cent
None
None
BTS
None
Not involved
Not involved
None
Radio
BSC6900
Faulty Management
0~65534
0 None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
Faulty Management
0~65534
0 None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
Faulty Management
Enumeration Type
None
1 None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
BSC6900
FLEXABISM ODE
BSC6900
FLEXMAIO
BSC6900
Time window for observing the clearance of the intermittent alarms. In this time window, the BTS statistical alarm is cleared if the occurrence of the intermittent SET alarm meets BTSALMFLASH the related TW(Optional) threshold. Time window for observing the intermittent alarms generated during the statistical period. In this time window, the BTS statistical alarm is reported if the occurrence of the intermittent SET alarm meets BTSALMFLASH the related TW(Optional) threshold. Service timeslot assignment mode for the BTS. If this parameter is set to FIX_16K_AB IS, the BSC assigns a fixed Abis transmission timeslot to a TCH. If this parameter is set to FLEX_ABIS, the BSC assigns an Abis transmission timeslot dynamically to a TCH (except the static PDCH) to increase the resource utilization. If this parameter is set to ADD SEMI_ABIS, BTS(Optional) the BTS to Whether to enable the function of Flex mobile allocation index offset (MAIO). In the tight frequency reuse case of the GSM system, adjacentchannel interference and cochannel interference easily occur between channels. If the frequency hopping function and the Flex MAIO function are enabled in a cell, adjacentchannel or cochannel ADD interference GCELL(Optional between ) channels can
MRFD210304
Faulty Management
60~65534
900 None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
MRFD210304
Faulty Management
60~65534
900 None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GBFD117301
Flex Abis
Enumeration Type
FIX_16K_ABIS(F ix Abis), FLEX_ABIS(Flex Abis), FIX_16K_ABIS, SEMI_ABIS(Sem FLEX_ABIS, isolid Abis) FIX_64K_ABIS
BTS
None
BTS
None
Transpor t
GBFD117001
Flex MAIO
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None OFF
Cell
This parameter is valid when "FHMODE" in the "SET GCELLHOPTP" command is not set to NO_FH.
Not involved
Not involved
None
Radio
6/9/2013
Page105of316
150682621.xls.ms_office
Security Level:
FLEXTSCS WITCH
BSC6900
Whether to enable the function of the Flex training sequence code (TSC). If the value of this parameter is ON and the BTS supports the Flex TSC function, the BSS dynamically allocates TSCs to hopping frequencies for improving the security of calls.
GBFD113521 GBFD118201
Encrypted Network Management SoftSynchronized Network Adaptive Adjustment of Uplink and Downlink Channels
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Period of SET collecting the BSCPSSOFTPA traffic GBFDRA(Optional) statistics. 119501 Fast flux measurement period. The ratio of the uplink flow to the downlink flow is calculated at the interval specified by this parameter to SET determine BSCPSSOFTPA the current GBFDRA(Optional) service type. 119501
0~65535
ms
None
4500 BSC
None
Not involved
Not involved
None
Radio
BSC6900
0~65535
ms
None
1000 BSC
None
Not involved
Not involved
If this paramete r is set to a small value, error is likely to occur during the detection of the The parameter modification burst has no impact on the packets. equipment. None The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None The parameter modification has no impact on the None equipment. None The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
BSC6900 V900R011
Radio
None
None
OFF, ON
None None
OFF
Board
None
Not involved
Not involved
Not involved
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
None
None
OFF, ON
None None
ON
Not involved
Not involved
FLOWCTRL SWITCH
GBFD118611 GBFD118622
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None ON
ON
PPP link
None
BSC6900
Transpor t
GBFD118611 GBFD118622
OFF, ON
None ON
ON
None
None
OFF, ON
None ON
ON
None
Not involved
Not involved
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
None
Not involved
Not involved
FLOWCTRL SWITCH
MRFD210103
Link aggregation
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None ON
ON
Not involved
Not involved
Not involved
None
Transpor t
FLOWCTRL SWITCH
BSC6900
BSC6900
BSC6900
Specified SET port flow BTSABISPRIMA control P(Optional) switch One of the nine parameters (filter parameters A1 to A8 and filter parameter B) used to configure the filter for determining whether the received signal level drops rapidly. The computation formula is as follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + A8 x C(nt-7t) If C1(nt) is less than B and C(nt) is less than the threshold for SET edge GCELLHOEMG( handover, the Optional) signal level is One of the nine parameters (filter parameters A1 to A8 and filter parameter B) used to configure the filter for determining whether the received signal level drops rapidly. The computation formula is as follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + A8 x C(nt-7t) If C1(nt) is less than B and C(nt) is less than the threshold for SET edge GCELLHOEMG( handover, the Optional) signal level is One of the nine parameters (filter parameters A1 to A8 and filter parameter B) used to configure the filter for determining whether the received signal level drops rapidly. The computation formula is as follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + A8 x C(nt-7t) If C1(nt) is less than B and C(nt) is less than the threshold for SET edge GCELLHOEMG( handover, the Optional) signal level is
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
BTS
None
Not involved
Not involved
Not involved
None
Transpor t
GBFD110601
HUAWEI I Handover
0~20
None None
10 Cell
This parameter is valid only when "RXQCKFALLHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "FLTPARAA1" + "FLTPARAA2" + "FLTPARAA3" + "FLTPARAA4" + "FLTPARAA5" + "FLTPARAA6" + "FLTPARAA7" + Read & "FLTPARAA8" = 80. Write
Not involved
Not involved
None
Radio
GBFD110601
HUAWEI I Handover
0~20
None None
10 Cell
This parameter is valid only when "RXQCKFALLHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "FLTPARAA1" + "FLTPARAA2" + "FLTPARAA3" + "FLTPARAA4" + "FLTPARAA5" + "FLTPARAA6" + "FLTPARAA7" + Read & "FLTPARAA8" = 80. Write
Not involved
Not involved
None
Radio
GBFD110601
HUAWEI I Handover
0~20
None None
10 Cell
This parameter is valid only when "RXQCKFALLHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "FLTPARAA1" + "FLTPARAA2" + "FLTPARAA3" + "FLTPARAA4" + "FLTPARAA5" + "FLTPARAA6" + "FLTPARAA7" + Read & "FLTPARAA8" = 80. Write
Not involved
Not involved
None
Radio
6/9/2013
Page106of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
One of the nine parameters (filter parameters A1 to A8 and filter parameter B) used to configure the filter for determining whether the received signal level drops rapidly. The computation formula is as follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + A8 x C(nt-7t) If C1(nt) is less than B and C(nt) is less than the threshold for edge handover, the signal level is One of the nine parameters (filter parameters A1 to A8 and filter parameter B) used to configure the filter for determining whether the received signal level drops rapidly. The computation formula is as follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + A8 x C(nt-7t) If C1(nt) is less than B and C(nt) is less than the threshold for edge handover, the signal level is One of the nine parameters (filter parameters A1 to A8 and filter parameter B) used to configure the filter for determining whether the received signal level drops rapidly. The computation formula is as follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + A8 x C(nt-7t) If C1(nt) is less than B and C(nt) is less than the threshold for edge handover, the signal level is One of the nine parameters (filter parameters A1 to A8 and filter parameter B) used to configure the filter for determining whether the received signal level drops rapidly. The computation formula is as follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + A8 x C(nt-7t) If C1(nt) is less than B and C(nt) is less than the threshold for edge handover, the signal level is One of the nine parameters (filter parameters A1 to A8 and filter parameter B) used to configure the filter for determining whether the received signal level drops rapidly. The computation formula is as follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + A8 x C(nt-7t) If C1(nt) is less than B and C(nt) is less than the threshold for edge handover, the signal level is
GBFD110601
HUAWEI I Handover
0~20
None None
10 Cell
This parameter is valid only when "RXQCKFALLHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "FLTPARAA1" + "FLTPARAA2" + "FLTPARAA3" + "FLTPARAA4" + "FLTPARAA5" + "FLTPARAA6" + "FLTPARAA7" + Read & "FLTPARAA8" = 80. Write
Not involved
Not involved
None
Radio
GBFD110601
HUAWEI I Handover
0~20
None None
10 Cell
This parameter is valid only when "RXQCKFALLHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "FLTPARAA1" + "FLTPARAA2" + "FLTPARAA3" + "FLTPARAA4" + "FLTPARAA5" + "FLTPARAA6" + "FLTPARAA7" + Read & "FLTPARAA8" = 80. Write
Not involved
Not involved
None
Radio
GBFD110601
HUAWEI I Handover
0~20
None None
10 Cell
This parameter is valid only when "RXQCKFALLHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "FLTPARAA1" + "FLTPARAA2" + "FLTPARAA3" + "FLTPARAA4" + "FLTPARAA5" + "FLTPARAA6" + "FLTPARAA7" + Read & "FLTPARAA8" = 80. Write
Not involved
Not involved
None
Radio
GBFD110601
HUAWEI I Handover
0~20
None None
10 Cell
This parameter is valid only when "RXQCKFALLHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "FLTPARAA1" + "FLTPARAA2" + "FLTPARAA3" + "FLTPARAA4" + "FLTPARAA5" + "FLTPARAA6" + "FLTPARAA7" + Read & "FLTPARAA8" = 80. Write
Not involved
Not involved
None
Radio
GBFD110601
HUAWEI I Handover
0~20
None None
10 Cell
This parameter is valid only when "RXQCKFALLHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "FLTPARAA1" + "FLTPARAA2" + "FLTPARAA3" + "FLTPARAA4" + "FLTPARAA5" + "FLTPARAA6" + "FLTPARAA7" + Read & "FLTPARAA8" = 80. Write
Not involved
Not involved
None
Radio
FLTPARAB
Trend of the received signal level of the cell during a period. This parameter helps to configure the filter for determining whether the received signal level drops rapidly. If this parameter is higher, a more rapid signal level drop is required to trigger the handover due SET to rapid GCELLHOEMG( signal level GBFDOptional) drop. 110601 Whether to instruct the BSC to discard or buffer the data of this MS when the SGSN detects the FLUSH-LL flow originated by the MS during cell reselection, SET cell update, BSCPSSOFTPA or routing GBFDRA(Optional) area update. 114101
HUAWEI I Handover
0~200
None None
0 Cell
This parameter is valid only when "RXQCKFALLHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
Radio
BSC6900
GPRS
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
OPEN
BSC
None
Not involved
Not involved
None
Radio
6/9/2013
Page107of316
150682621.xls.ms_office
Security Level:
FMUTYPE
BSC6900
Maximum transmit power level of MSs. As one of the cell reselection parameters in system message 3, this parameter is used to control the transmit power of MSs. For details, see GSM Rec. 05.05. In a GSM900 cell, the maximum power control level of an MS ranges from 0 to 19, correspondin g respectively to the following GBFDvalues (unit: 111003 Type of the GBFDFMUA board 111202
Radio Common Channel Management Interval Type 0~19 INDOOR(Indoor) 0~19 , Enumeration OUTDOOR(Outd INDOOR, O&M of BTS Type oor) OUTDOOR
None None
5 Cell
None
Not involved
Not involved
None None
None
BTS
None
Not involved
Not involved
FN
File Name
BSC6900
EXP Name of the ELABEL(Optiona electronic l) label file DLD LICENSE(Manda tory) ULD LICENSE(Manda tory) EXP DEVFILE(Option al)
MRFD210301
Configuration Management
String Type
None
0~128 characters
None None
None
None
None
Not involved
Not involved
The default value of "MS_TX PWR_M AX_CCH " in the GSM900 and GSM850 cells is 5; the default value of "MS_TX PWR_M AX_CCH " in the DCS180 0 and The parameter modification PCS1900 has no impact on the cells is 0. equipment. None The parameter modification has no impact on the None equipment. None In "EXP ELABEL" , the "FN" paramete r cannot be a space or any of the following character s: '@', '#', '!', The parameter modification '%', '^', has no impact on the '&', '*', '[', equipment. None
Radio Equipme nt
BSC6900 V900R011
Equipme nt
FN
File Name
BSC6900
String Type
None
1~100 characters
None None
None
RNC
None
Not involved
Not involved
None
FN
File Name
BSC6900
O&M of BSC
String Type
None
1~128 characters
None None
None
BSC69 00 None
Not involved
Not involved
None.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
FN
File Name
BSC6900
Name of the file. The EXP following CFGMML(Optio special nal) characters BKP are not DB(Optional) allowed in EXP the file name: GCELLTEMPLA \, /, :, *, ?, ", MRFDTE(Optional) <, >, and |. 210301 Name of the specified file. By default, the file is in the OMU active-area CHK path DATA2LIC(Optio \ftp\license MRFDnal) folder. 210403 DLD BTSSW(Mandat ory) DLD RETANTCFG(M andatory) EXP BTSDEVFILE(O ptional) LOD RETANTCFG(M andatory) Name of the ULD software to BTSLOG(Manda be tory) downloaded
Configuration Management
String Type
None
0~128 characters
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
FN
File Name
BSC6900
License Management
String Type
None
0~100 characters
None None
none
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
FN
File Name
BSC6900
GBFD111202
O&M of BTS
String Type
None
1~256 characters
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
FN
File Name
BSC6900
Name of the software to be downloaded. The file name must be with the extension of *.zip.If you do not enter the file name, all the valid files in the directory are downloaded. These valid files are extracted DLD from the BTSPATCH(Opti patch GBFDonal) package. 111202 Switch specifying whether to allow the downlink EGPRS TBF and the uplink GPRS TBF to share the same channel. On: allow the downlink EGPRS TBF and the uplink GPRS TBF to share the same channel; Off: prohibit the downlink EGPRS TBF and the uplink GPRS SET TBF sharing BSCPSSOFTPA the same GBFDRA(Optional) channel. 114201 Length of the timer for determining the intermittent ADD disconnection GCNNODE(Opti of the link to GBFDonal) the DPC. 111804 Time limit for SET restraining TCPARA(Option the noise GBFDal) level 115601 Whether the forced phaseSET 2 access is BSCPSSOFTPA allowed for GBFDRA(Optional) the MS. 114101
O&M of BTS
String Type
None
1~256 characters
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
EGPRS
Enumeration Type
OPEN(Open), CLOSE(Close)
OPEN, CLOSE
None None
OPEN
BSC
None
Not involved
Not involved
None
Radio
BSC6900
1~300
15
15 MSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The radio link should be reestablished after the parameter modification.
BSC6900 V900R011
Equipme nt
BSC6900
0~30
None
0 Board
None
Not involved
Not involved
None
None
Equipme nt
BSC6900
GPRS
Enumeration Type
Close(Close), Open(Open)
Close, Open
None None
Close
BSC
None
Not involved
Not involved
BSC6900
Whether to forcibly enable the EFR function. When this parameter is set to YES, if both the MS and the BSC support the enhanced full rate (EFR), the BSC forcibly enables the EFR function even if the MSC does not support GBFDthe function. 110501 Whether an MS is forced to send a Handover Access message, which is indicated by an information element in the handover command.
Call Control
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None When this paramete r is set to YES, during the channel activation of the BSC, if the allocated channel speech version is full rate speech version 1 whereas the MS supports full rate speech version 2, the BSC changes the speech version to full The parameter modification rate has no impact on the If this parameter is set to YES, the speech equipment. speech quality is improved.
Radio
Radio
BSC6900
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page108of316
150682621.xls.ms_office
Security Level:
FPN
BSC6900
Port No. of the father ADD BTS BTSAUTOPLAN( connected GBFDMandatory) with the BTS 111202
O&M of BTS
0~31
None None
None
BTS
None
BTS
None
BSC6900 V900R011
Equipme nt
FPN
BSC6900
FPTIMER
FPTIMER[ms]
BSC6900
Number of the port for the destination father BTS Maximum multiplex delay. This parameter is used for the system to send the multiplexed data without waiting for multiplexing other packets when the duration for buffering the data exceeds this delay. In this way, overlong ADD delay can be IPMUX(Optional) prevented. ADD BTSCONNECT( Mandatory) Whether to generate the frequency and BSIC by using the SET automatic BTSAUTOPLAN optimization CFG(Optional) algorithm If this switch is on, it indicates that the frequency and BSIC are generated automatically . If this switch is off, it indicates that the data SET must be BTSAUTOPLAN configured CFG(Optional) manually. If this switch is on, it indicates that the frequency and BSIC are generated automatically . If this switch is off, it indicates that the data SET must be BTSAUTOPLAN configured CFG(Optional) manually.
GBFD111202
O&M of BTS
0~7
None None
None
BTS
None
BTS
This paramete r can be modified only when the BTS is The BTS should be reset to deactivat validate the parameter ed. modification. None
Radio
GBFD118604 GBFD118610
1~30
ms
2 IP path None
Not involved
Not involved
The adjacent node ID must be The parameter modification configure has no impact on the d. equipment. None
Transpor t
BSC6900
GBFD510701
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
GBFD510701
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
GBFD510701
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
FRAGSIZE
MP flake size
BSC6900
ADD MPGRP(Optiona MP segment l) size SET BTSEXCURSIO N(Mandatory) SET BSCSYNCOFF( Mandatory)
GBFD118611 GBFD118622
128~1024
byte
256 None
MP group
None
Not involved
Not involved
No_HC: disable the header compres sion function; RTP/UD P/IP_HC: enable the RTP/UD The parameter modification P/IP/PPP has no impact on the function equipment. None
Transpor t
FRAMEOFF SET
BSC6900
FRAMEOFF SET
Frame Offset
BSC6900
FRDLDTX
BSC6900
Frame offset of the BTS clock. Frame offset. The frame offset technology arranges the frame numbers of different cells under the same BTS to be different from one another by one frame offset. Thus, the FCH and SCH signals of neighboring cells do not appear in the same frame, which is helpful for the coding of an MS. If the value of this parameter is 0, the cell is not offset. If the value is SET 255, this GCELLOTHEXT( parameter is Optional) not sent. the If Whether downlink discontinuous transmission (DTX) function is enabled for full rate (FR) calls. This function is also restricted by the DTX switch in the MSC. If the MSC allows the downlink DTX for calls and the value of this parameter is YES, the downlink DTX is SET enabled for GCELLBASICPA FR calls of RA(Optional) cells. Time mode used when the log is exported. "ONTIME" indicates the time between two exact time. "RELATIVE_ T" indicates the time EXP before the LOG(Mandatory) current time. Based on different requirements , you can set different time points for the scheduled task. Seven time modes are available: 1. ONTIME: When this parameter is set to "ONTIME", the command is executed once only at the specified time point. 2. DAILY_T: When this parameter is set to "DAILY_T", the command is executed every days. You can also ADD set up to five SUBTSK(Mandat time points ory) for executing
GBFD118201
SoftSynchronized Network
-2715647~2715647
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
MRFD210301
Configuration Management
0~255
None None
None
Cell
None
Not involved
Not involved
For a BTS of the BTS3X series, the value of this paramete The parameter modification r is has no impact on the invalid. equipment.
This technology prevents the loss of measurement reports caused by the BSIC that cannot be decoded, improves the system performance, and ensures the Versions earlier than radio handover success rate of the BSC. BSC6900 V900R011
Radio
GBFD114801
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
The discontinuous transmission (DTX) function allows a transmitter to stop power transmission in the case of no voice transfer. This function has the following benefits: In the uplink: decreasing the power consumption of the MS and reducing system interference In the downlink: decreasing power consumption of the BTS, reducing system interference, and reducing intermodulation inside the BTS The parameter modification From the network perspective, the interhas no impact on the frequency interference is reduced and the Versions earlier than equipment. network quality is improved. BSC6900 V900R011
Radio
FREQ
Time Mode
BSC6900
GBFD111203 MRFD210305
Enumeration Type
None
RNC
None
Not involved
Not involved
None
Equipme nt
FREQ
Time Mode
BSC6900
GBFD111203
O&M of BSC
Enumeration Type
ONTIME(fixed_ti me), DAILY_T(day_ba sed_scheduling), DAILY_C(day_b ased_duration), WEEKLY_T(wee k_based_schedul ing), WEEKLY_C(wee k_based_duratio n), MONTHLY_T(mo nth_based_sche duling), MONTHLY_C(m onth_based_dura tion)
None None
None
RNC
None
Not involved
Not involved
FREQ
Frequency
BSC6900
Frequency Band
0~1023
None None
None
TRX
None
Cell
The parameter modification has no impact on the None equipment. None The value range of this paramete r depends on the frequenc y range The parameter modification of the has no impact on the cell band. equipment. None
Equipme nt
Radio
6/9/2013
Page109of316
150682621.xls.ms_office
Security Level:
FREQ1
Frequency 1
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None
Radio
FREQ10
Frequency 10
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ11
Frequency 11
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ12
Frequency 12
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ13
Frequency 13
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ14
Frequency 14
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ15
Frequency 15
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ16
Frequency 16
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ17
Frequency 17
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ18
Frequency 18
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ19
Frequency 19
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
6/9/2013
Page110of316
150682621.xls.ms_office
Security Level:
FREQ2
Frequency 2
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None
Radio
FREQ20
Frequency 20
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ21
Frequency 21
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ22
Frequency 22
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ23
Frequency 23
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ24
Frequency 24
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ25
Frequency 25
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ26
Frequency 26
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ27
Frequency 27
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ28
Frequency 28
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ29
Frequency 29
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
6/9/2013
Page111of316
150682621.xls.ms_office
Security Level:
FREQ3
Frequency 3
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None
Radio
FREQ30
Frequency 30
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ31
Frequency 31
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ32
Frequency 32
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ33
Frequency 33
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ34
Frequency 34
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ35
Frequency 35
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ36
Frequency 36
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ37
Frequency 37
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ38
Frequency 38
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ39
Frequency 39
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
6/9/2013
Page112of316
150682621.xls.ms_office
Security Level:
FREQ4
Frequency 4
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None
Radio
FREQ40
Frequency 40
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ41
Frequency 41
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ42
Frequency 42
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ43
Frequency 43
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ44
Frequency 44
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ45
Frequency 45
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ46
Frequency 46
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ47
Frequency 47
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ48
Frequency 48
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ49
Frequency 49
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
6/9/2013
Page113of316
150682621.xls.ms_office
Security Level:
FREQ5
Frequency 5
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None
Radio
FREQ50
Frequency 50
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ51
Frequency 51
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ52
Frequency 52
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ53
Frequency 53
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ54
Frequency 54
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ55
Frequency 55
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ56
Frequency 56
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ57
Frequency 57
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ58
Frequency 58
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ59
Frequency 59
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
6/9/2013
Page114of316
150682621.xls.ms_office
Security Level:
FREQ6
Frequency 6
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None If the BCCH frequenc y of a cell is changed, the BSC forcibly hands over the calls in this cell to another cell and then The parameter modification resets has no impact on the this cell. equipment. None
Radio
FREQ60
Frequency 60
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ61
Frequency 61
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ62
Frequency 62
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ63
Frequency 63
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ64
Frequency 64
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ7
Frequency 7
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ8
Frequency 8
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQ9
Frequency 9
BSC6900
GBFD110101
Frequency Band
0~1023
None None
None
Cell
None
Cell
Radio
FREQADJ
BSC6900
Whether to enable the automatic frequency correction algorithm. This parameter is used for the fast-moving handover algorithm. If the parameter is set to YES, the BTS calculates the speed at which an MS leaves or approaches it, and sends the BSC the calculated speed in an SET uplink GCELLOTHEXT( measurement GBFDOptional) report. 510101
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page115of316
150682621.xls.ms_office
Security Level:
BSC6900
Frequency correction parameter. Used for the fast-moving handover algorithm, the value of this parameter must be translated into a binary number. The value consists of 16 bit. The most significant bit indicates whether the parameter is valid. Bits 14 to 8 indicate the level threshold. Bits 7 to 0 indicate the threshold of the bit error ratio (BER). The BSC SET sends this GCELLOTHEXT( parameter to GBFDOptional) the BTS, 510101
AFC(Automatic Frequency Correction) Interval Type 0~65535 PGSM900(PGS M900), EGSML25(EGS M<L25>), EGSM35M(EGS M<35M>), RGSML25(RGS M<L25>), GSM900_RGSM 39M(GSM900_R GSM<39M>), DCS1800(DCS1 800), PCS1900(PCS19 00), GSM850(GSM8 50), EGSM24M(EGS M<24M>), DCS1800_L(DC S1800<L50M>), DCS1800_H(DC S1800<H50M>)
0~65535
None None
None
Cell
None
Not involved
Not involved
None
Radio
FREQBAND
BSC6900
FREQLOAD GSM900 Band SHARETRAF Traffic Load Share FTHRSH Threshold BSC6900
FREQLST
BSC6900
Frequency band attribute of the board Threshold for load sharing in the 900 MHz frequency band. Assume that an MS supports multiple subbands in the 900 MHz frequency band. If the cell load is equal to or less than this threshold, the BSC does not consider the priority levels of the P-GSM, EGSM, and RGSM subbands during channel assignment. If the cell load is greater than SET this GCELLCHMGA threshold, the D(Optional) BSC assigns SET List of GCELLFREQSC frequency AN(Optional) bands ADD BTSANTFEEDE RBRD(Optional) Frequency multiplexing mode in the TRX. To enable a loose frequency multiplexing mode such as 4x3 multiplexing, set this parameter to LOOSE. To enable a tight frequency multiplexing mode such as 1x3 or SET 1x1, set this GTRXDEV(Optio parameter to nal) TIGHT. List of the frequencies to be measured. This parameter is represented as a character string where the IDs of the TRXs to be measured are separated by STR &, such as NCS(Mandatory) 1&124&956. Type of a scanning result in the period from the start of a frequency scanning task to the reporting of the scanning result. Frequency scanning refers to the scanning of an uplink receive level of a cell frequency. The scanning result reflects the strength of frequency signals received by the cell. Whether to enable the edge handover algorithm. When an MS makes a call at the edge of a cell, the call may drop if the received signal level is too low. To avoid such a call drop, the edge handover algorithm is involved. When the uplink signal level of the serving cell is less than "Edge HO UL RX_LEV Threshold" or the downlink signal level of the serving cell is less than "Edge HO DL
MRFD210301
Configuration Management
Enumeration Type
PGSM900, EGSML25, EGSM35M, RGSML25, GSM900_RGSM39 M, DCS1800, PCS1900, GSM850, EGSM24M, DCS1800_L, DCS1800_H None None
None
BTS
None
Not involved
Not involved
None
Radio
GBFD111005 GBFD112401
0~100
per cent
None
25 Cell
None
Not involved
Not involved
None
0~1023
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
BSC6900 V900R011
Radio
FREQREUS EMODE
BSC6900
MRFD210301
Configuration Management
Enumeration Type
LOOSE(Loose), TIGHT(Tight)
LOOSE, TIGHT
None None
None
TRX
None
Not involved
Not involved
None
The setting of this parameter must be The parameter modification consistent with the actual frequency reuse has no impact on the pattern of the TRX. Otherwise, the Versions earlier than equipment. speech quality will be bad. BSC6900 V900R011
Radio
FREQS
Frequency List
BSC6900
GBFD510901
String Type
None
1~800 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Radio
FREQSCAN RLSTTYPE
BSC6900
GBFD112401
Enumeration Type
None
Cell
None
Not involved
Not involved
This paramete r is valid in only the cells in the coverage area of The parameter modification the has no impact on the BTS3X. equipment. None
Radio
FRMFLAG
BSC6900
None None
YES
Cell
None
Not involved
Not involved
None
None None
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio Equipme nt
BSC6900 V900R011
FRULDTX
FR Uplink DTX
BSC6900
Whether the uplink (DTX) function is enabled for FR calls. For SET details, see GCELLBASICPA GSM Rec. GBFDRA(Optional) 05.08. 114803
Enumeration Type
May_Use(May Use), Shall_Use(Shall Use), May_Use, Shall_NOT_Use( Shall_Use, Shall not Use) Shall_NOT_Use
None None
None
Cell
None
Not involved
Not involved
None
The discontinuous transmission (DTX) function allows a transmitter to stop power transmission in the case of no voice transfer. This function has the following benefits: In the uplink: decreasing the power consumption of the MS and reducing system interference In the downlink: decreasing power consumption of the BTS, reducing system interference, and reducing intermodulation inside the BTS The parameter modification From the network perspective, the interhas no impact on the frequency interference is reduced and the Versions earlier than equipment. network quality is improved. BSC6900 V900R011
Radio
6/9/2013
Page116of316
150682621.xls.ms_office
Security Level:
FSN
BSC6900
GBFD510701
0~23
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
FSN
BSC6900
GBFD111202
0~23
None None
None
BTS
None
BTS
This paramete r can be modified only when the BTS is The BTS should be reset to deactivat validate the parameter ed. modification. None The parameter modification has no impact on the equipment. None
Radio
FSRN
BSC6900
GBFD510701
0~255
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
FSRN
BSC6900
GBFD111202
0~254
None None
None
BTS
None
BTS
This paramete r can be modified only when the BTS is The BTS should be reset to deactivat validate the parameter ed. modification. None The parameter modification has no impact on the equipment. None
Radio
FT
File Type
BSC6900
EXP LOG(Optional)
Type of the GBFDfile used for 111203 saving MRFDexported logs 210305
Enumeration Type
TXT, CSV
None TXT
TXT
RNC
None
Not involved
Not involved
None
Equipme nt
FTI
BSC6900
None
None
0~33
None None
None
The factor table index is configured by setting the Adjace value of "FTI" in "ADD Read & nt node FACTORTABLE". Write
Not involved
Not involved
The FACTOR TABLE must be The parameter modification configure has no impact on the d. equipment. None The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
Transpor t
FTI
BSC6900
None
None
1~33
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
FTI
BSC6900
SET Activation BTSABISPRIMA factor table P(Mandatory) index ATCB difference between the overlaid and underlaid subcells
None
None
0~33
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
GBFD510501
HUAWEI II Handover
0~255
dB
None
20 Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM2. Write
Not involved
Not involved
None
If this parameter is set to a greater value, the voice quality may be decreased. The parameter modification If this parameter is set to a smaller value, has no impact on the the congestion relieving capability may be Versions earlier than equipment. decreased. BSC6900 V900R011
Radio
BSC6900
Duration of the handover from full rate to half rate. If the cell load is greater than the preset threshold, the calls that meet the conditions for the handover from full rate to half rate are handed over from full rate to half rate in this GBFDduration. 510501 According to the P/N rule, if the conditions for the handover from full rate to half rate are met for P seconds within N seconds, the handover is triggered. This parameter specifies the GBFDnumber P. 510501 Path loss difference between the overlaid and underlaid subcells
HUAWEI II Handover
0~600
None
5 Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, the duration of an AMR TCHF-TCHH handover is short after the handover is triggered. Thus, few MSs can be handed over from TCHF to TCHH, and the congestion relieving capability is decreased. If this parameter is set to a greater value, the duration of an AMR TCHF-TCHH handover is long after the handover is triggered. Thus, even the MSs on the The parameter modification edge of the cell are handed over from has no impact on the TCHF to TCHH, and the voice quality Versions earlier than equipment. deteriorates. BSC6900 V900R011
Radio
BSC6900
HUAWEI II Handover
1~16
None
2 Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM2. Write
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time and network congestion may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011 If this parameter is set to a greater value, network congestion may occur because the handover may not be performed The parameter modification timely. has no impact on the If this parameter is set to a smaller value, Versions earlier than equipment. the voice quality may be decreased. BSC6900 V900R011
Radio
BSC6900
GBFD510501
HUAWEI II Handover
0~255
dB
None
10 Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM2. Write
Not involved
Not involved
None
Radio
BSC6900
Period of the handover from full rate to half rate. If the cell load is greater than the preset threshold, the calls that meet the conditions for the handover from full rate to half rate are handed over in "H-F Ho Duration". This parameter specifies the bandwidth to be handed over at each hierarchy GBFDlevel. 510501 According to the P/N rule, if the conditions for the handover from full rate to half rate are met for P seconds within N seconds, the handover is triggered. This parameter specifies the GBFDnumber N. 510501
HUAWEI II Handover
0~600
None
1 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "FULLTOHALFHODURA TION" >= "FULLTOHALFHOPERIO Read & D". Write
Not involved
Not involved
None
If this parameter is set to a smaller value, the handover zone is enlarged in a short time, and thus many MSs are handed over from TCHF to TCHH. If this parameter is set to a greater value, the handover zone is enlarged slowly and The parameter modification it takes a long time to initiate a TCHFhas no impact on the TCHH handover. Thus, and the congestion Versions earlier than equipment. relieving capability is decreased. BSC6900 V900R011
Radio
BSC6900
HUAWEI II Handover
1~16
None
3 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "FULLTOHALFHOSTATT IME" >= "FULLTOHALFHOLASTT Read & IME". Write
Not involved
Not involved
None
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, The parameter modification network congestion may occur because has no impact on the the handover may not be performed Versions earlier than equipment. timely. BSC6900 V900R011
Radio
BSC6900
Forward ADD congestion TRMLOADTH(O remain ptional) bandwidth Forward ADD congestion TRMLOADTH(O clear ptional) bandwidth Forward ADD congestion TRMLOADTH(O clear remain ptional) ratio
None
None
0~200000
kbit/s
BSC69 0 00 None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
BSC6900
None
None
0~200000
kbit/s
BSC69 0 00 None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
None
None
0~100
per cent
20
BSC69 20 00 None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
ADD Forward TRMLOADTH(O congestion ptional) remain ratio Forward overload ADD congestion TRMLOADTH(O clear remain ptional) bandwidth Forward overload ADD congestion TRMLOADTH(O clear remain ptional) ratio Forward overload ADD congestion TRMLOADTH(O reserved ptional) bandwidth Forward ADD overload TRMLOADTH(O congestion ptional) remain ratio Forward ADD handover TRMLOADTH(O reserved ptional) ratio Forward handover reserved bandwidth
None
None
0~100
per cent
15
BSC69 15 00 None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
None
None
0~200000
kbit/s
BSC69 0 00 None
Not involved
Not involved
Not involved
None
Transpor t
Forward overload FWDOVLDC congestion clear LRTH remain ratio Forward overload congestion FWDOVLDR reserved SVBW bandwidth
BSC6900
None
None
0~100
per cent
BSC69 1 00 None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
None
None
0~200000
kbit/s
BSC69 0 00 None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
None
None
0~100
per cent
BSC69 0 00 None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
None
None
0~100
per cent
BSC69 5 00 None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
FWFLAG
BSC6900
None MRFD210304
kbit/s
BSC69 0 00 None
Not involved
Not involved
Not involved
Flow Log Flag The Upper SET Limit Of LOGCFG(Option Process Log al) Can Start
None None
None
RNC
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None The parameter modification has no impact on the equipment. None
Transpor t Equipme nt
BSC6900 V900R011
MRFD210304
Faulty Management
{10~1000}
None None
None
RNC
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
If the load balance between a 2G cell and a 3G cell is greater than SET the threshold, OTHSOFTPARA load balance MRFD(Optional) is triggered. 211402
{-100~100}
per cent
None
110 BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
6/9/2013
Page117of316
150682621.xls.ms_office
Security Level:
BSC6900
Coefficient used to modulate the load level of a 2G system so that the load level of the 2G SET system can GCELLHOINTE be compared RRATLDB(Optio with that of a MRFDnal) 3G system. 211402 G711 Mode. A/U law configuration, SET 0-A law TCPARA(Option (default), 1-U GBFDal) law 118602 Expected signal receiving strength on the BTS side when GPRS dynamic SET power GCELLPSPWPA control is GBFDRA(Optional) implemented. 119115 ADD AISSCFG(Optio nal) End time for collecting the offset GBFDinformation. 118201 Cell load threshold for collecting the offset information. If the load threshold is exceeded, the offset information is GBFDnot collected. 118201 Whether to collect the offset GBFDinformation. 118201 Start time for collecting the offset GBFDinformation. 118201
{0~100}
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
G711_Mode
G711 Mode
BSC6900
A over IP
Enumeration Type
A0, U1
A0, U1
None None
None
Board
None
Not involved
Not involved
None
Equipme nt
GAMMA
GAMMA
BSC6900
0~31
None None
12 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
GATHET
BSC6900
Compound Type
hour, min
hour{0~23} min{0~59}
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
GATHLOD
0~100
None
40 None
BSC69 00 None
Not involved
Not involved
None.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
GATHON
BSC6900
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
GATHST
BSC6900
Compound Type
hour, min
hour{0~23} min{0~59}
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
GBRQOS
GCChk
BSC6900
Obtains the QoS parameter from the Aggregate BSS QoS Profile (ABQP) of packet flow context (PFC) when the MS and the network support the PFC; obtains the QoS parameter from the uplink request originated by the MS or the DL UNITDATA of SET the SGSN. GCELLPSOTHE Gbr: RPARA(Optional guaranteed ) bit rate. Whether to enable the function of group call check. If the function is enabled, the BSC regularly performs a check on the SET group call BSCBASIC(Opti resources of onal) the BTS. Whether the assignment of channels in overlaid subcells is enabled for the VGCS service in the case of underlaid subcell congestion. Generally, only the channels in underlaid subcells can SET be assigned GCELLGSMR(O to the VGCS ptional) service. Whether direct preemption of the channels of other services is enabled for the VGCS service. If the value of this parameter is NO, a handover is performed for the call whose channel is preempted. If the value is YES, calls on the preempted SET channel are GCELLGSMR(O directly ptional) released.
GBFD119901
Streaming QoS(GBR)
Enumeration Type
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
GBFD510301 GBFD510302
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
ON
BSC69 00 None
Not involved
Not involved
None
Equipme nt
GCSCHNAS SULCHNEN
BSC6900
GBFD510301 GBFD510302
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
GBFD510307
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
GENCCHDL
BSC6900
WCDMA AMR general common channel ADD service TRMFACTOR(O downlink ptional) factor None
None
0~100
per cent
70
BSC69 70 00 None
Not involved
Not involved
GENCCHUL
BSC6900
WCDMA general common ADD channel TRMFACTOR(O service uplink ptional) factor None
None
0~100
per cent
70
BSC69 70 00 None
Not involved
Not involved
None The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the
Radio
Transpor t
Transpor t
6/9/2013
Page118of316
150682621.xls.ms_office
Security Level:
GLOBALRO UTESW
BSC6900
GMSKDELA Y
Global routing management switch. If this switch is turned on, the IP addresses in the controlled range cannot be in the SET same GLOBALROUTE network SW(Mandatory) segment. None Delay of the transmit diversity. Generally, the parameter is set to 2 bit (7.4 us), applicable to general fading environments . A transmit diversity can generally obtain the gain of 3 dB to 5 dB. Because the fading conditions vary with the environment where an MS lies, however, MSs in a fixed time delay obtain different gains, which SET may have GCELLBASICPA negative GBFDRA(Optional) effects on 114101
None
Enumeration Type
OFF(Disable the golbal route management), ON(Enable the golbal route management) OFF, ON
None None
None
BSC69 00 None
Not involved
Not involved
This paramete r determin es whether to load data from the OMU or the FLASH when the BSC or the board is restarted . The The parameter modification equipmen has no impact on the t is equipment. None
Transpor t
GPRS
GPRS
GPRS
BSC6900
Whether the SET current cell GCELLGPRS(M supports andatory) GPRS. Whether the ADD currently cell GCELLQUICKS supports the ETUP(Optional) GPRS Hysteresis value of the cell in the same routing area. When the MS in the ready state reselects a cell, if the original cell and the target cell are in the same routing area, the C2 values of the two cells at the border of the cell are quite different due to radio channel fading. As a result, the MS frequently reselects cells. Frequent cell SET reselection GCELLRESELE can lead to CTPARA(Option increase of al) signalling EGPRS priority type of the channel If this parameter is set to GPRS, the EDGE MSs cannot use this channel. If this parameter is set to EGPRSNOR CH, the GPRS and EDGE MSs can use this channel at the same priority. If this parameter is set to EGPRSPRIC H, the EDGE MSs have the priority to use this channel. SET If this GTRXCHAN(Opt parameter is ional) set to
GBFD114101
GPRS
Interval Type 4~32 0.5~4, step: 1/8 NO(Not Support), SupportAsInnPcu (Support As Inner Pcu), SupportAsExtPcu NO, Enumeration (Support As SupportAsInnPcu, Type Outer Pcu) SupportAsExtPcu NO, SupportAsInnPcu NO, , SupportAsInnPcu, SupportAsExtPcu SupportAsExtPcu
bit
None
16 Cell
None
Not involved
Not involved
The value of this paramete r is valid only for the BTSs of the doubletransceiv er series and the The parameter modification distribute has no impact on the d BTSs. equipment. None
Equipme nt
None None
None
Cell
None
Cell
If this parameter is set to "NO", cell does not support GPRS. None
Radio
GPRS
Support GPRS
BSC6900
GBFD114101
GPRS
Enumeration Type
None NO
NO
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
GBFD114101
GPRS
Enumeration Type
None
2dB
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD114201
EGPRS
Enumeration Type
GPRS(GPRS Channel), EGPRSNORCH( EGPRS Normal Channel), EGPRSPRICH(E GPRS Priority Channel), EGPRSSPECH( EGPRS Special Channe), NONGPRS(NonGPRS Channel) DB110(-110dB), DB108(-108dB), DB106(-106dB), DB104(-104dB), DB102(-102dB), DB100(-100dB), DB98(-98dB), DB96(-96dB), DB94(-94dB), DB92(-92dB), DB90(-90dB), DB88(-88dB), DB86(-86dB), DB84(-84dB), DB82(-82dB), DB80(-80dB), DB78(-78dB), DB76(-76dB), DB74(-74dB), DB72(-72dB), DB70(-70dB), DB68(-68dB), DB66(-66dB), DB64(-64dB), DB62(-62dB), DB60(-60dB), DB58(-58dB), DB56(-56dB), DB54(-54dB), DB52(-52dB), DB50(-50dB), DB48(-48dB), nouse(no use) 10sec(10sec), 20sec(20sec), 30sec(30sec), 40sec(40sec), 50sec(50sec), 60sec(60sec), 70sec(70sec), 80sec(80sec), 90sec(90sec), 100sec(100sec), 110sec(110sec), 120sec(120sec), 130sec(130sec), 140sec(140sec), 150sec(150sec), 160sec(160sec), 170sec(170sec), 180sec(180sec), 190sec(190sec), 200sec(200sec), 210sec(210sec), 220sec(220sec), 230sec(230sec), 240sec(240sec), 250sec(250sec), 260sec(260sec), 270sec(270sec), 280sec(280sec), 290sec(290sec), 300sec(300sec), 310sec(310sec), 320sec(320sec), nouse(no use)
None None
None
Not involved
Not involved
None
Radio
GPRSHCST HR
BSC6900
Threshold of hierarchical cell structure (HCS) signal strength. The MS calculates the C31 according to the signal strength and its threshold and selects the adjacent SET cell during GCELLSERVPA cell GBFDRA(Optional) reselection. 114101
GPRS
Enumeration Type
DB110, DB108, DB106, DB104, DB102, DB100, DB98, DB96, DB94, DB92, DB90, DB88, DB86, DB84, DB82, DB80, DB78, DB76, DB74, DB72, DB70, DB68, DB66, DB64, DB62, DB60, DB58, DB56, DB54, DB52, DB50, DB48, no use dB
None
DB110
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Timer used when the MS calculates the C2 (used to evaluate the channel quality during cell reselection). The time information is SET transmitted in GCELLNCRESE the system LECTPARA(Opti message of GBFDonal) each cell. 114101
GPRS
Enumeration Type
10sec, 20sec, 30sec, 40sec, 50sec, 60sec, 70sec, 80sec, 90sec, 100sec, 110sec, 120sec, 130sec, 140sec, 150sec, 160sec, 170sec, 180sec, 190sec, 200sec, 210sec, 220sec, 230sec, 240sec, 250sec, 260sec, 270sec, 280sec, 290sec, 300sec, 310sec, 320sec, no use
None
10sec
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page119of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
Used for the GPRS transmission quality statistics. When the transmission quality threshold is exceeded, the transmission SET quality is GCELLNC2PAR regarded GBFDA(Optional) deteriorated. 116201 This parameter is used to prevent repeated cell reselection of a fast moving MS. The MS does not select this cell when the duration of maintaining the BCCH signal channel SET strength GCELLNCRESE does not LECTPARA(Opti reach the GBFDonal) penalty time. 114101 Synchronizati SET BTSDGPSBP(O ptional) SET BTSUSCUBP(Op tional) on clock adopted when two satellite cards are used
0~7
None None
5 Cell
None
Not involved
Not involved
None
Radio
GPRS
Enumeration Type
0db(0db), 10db(10db), 20db(20db), 30db(30db), 40db(40db), 50db(50db), 60db(60db), infinity(infinity), nouse(no use)
None
10db
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD510401
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Whether to allow hierarchical access and to reserve SET resources for GCELLCHMGBA high-priority GBFDSIC(Optional) MSs 116001 Number of the VGCS call that the BTS originates in the timeslot in the TRX in fallback mode. This parameter is represented in decimal, such as 10000569. If this parameter is set to 100000000, the channel is not SET configured BTSCHNFALLBA with any fixed GBFDCK(Mandatory) group call. 510309 Number of the VGCS call that the BTS originates in the timeslot in the TRX in fallback mode. This parameter is represented in decimal, such as 10000569. If this parameter is set to 100000000, the channel is not configured with any fixed group call. Index of the BSC Node Redundancy Group. Name of the BSC Node Redundancy Group. Maximum number of secondary links that are released in batches when the Abis resource preemption occurs on the Abis
Resource Reservation
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
GROUPCAL LNUM1
BSC6900
0~100000000
None None
None
BTS
None
Not involved
Not involved
This paramete r is supporte d only by the following types of BTSs: BTS3012 , BTS3006 C, BTS3012 AE, BTS3012 II, and The parameter modification BTS3002 has no impact on the E. equipment. None
Equipme nt
GROUPCAL LNUM2
BSC6900
GBFD510309
0~100000000
None None
None
BTS
None
Not involved
Not involved
This paramete r is supporte d only by the following types of BTSs: BTS3012 , BTS3006 C, BTS3012 AE, BTS3012 II, and The parameter modification BTS3002 has no impact on the E. equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
BSC Node GROUPINDE Redundancy Group X Index BSC6900 BSC Node GROUPNAM Redundancy Group E Name BSC6900
GBFD113725
0~65534
None None
None
BSC69 00 None
BTS
None
BSC6900 V900R011
Equipme nt
GBFD113725
String Type
None
1~20 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GROUPREL TSNUM
BSC6900
GBFD117301
Flex Abis
0~512
None None
None
BTS
None
Not involved
Not involved
None
Radio
GRPID
BSC6900
None
None
0~2047
None None
None
Trans mission resour ce group None Trans mission resour ce group None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
GRPT
BSC6900
None
None
Enumeration Type
ATM(ATM), IP(IP)
ATM, IP
None None
None
Not involved
Not involved
Not involved
None
Transpor t
GS
Geography Scope
BSC6900
Geographical coverage of a simple cell broadcast message. You can run "DSP GSMSCB" to query and obtain the information. This parameter, SET "Code", and GCELLSBC(Opti "Update" onal) uniquely ADD specify a cell GSMSCB(Mand broadcast GBFDatory) message. 113602 Common transport ADD GSM TRMLOADTH(O bandwidth ptional) ratio.
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
MRFD211503
0~100
per cent
80
Trans mission resour ce 80 group None Trans mission resour ce 80 group None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
BSC6900
BSC6900
BSC6900
ADD GSM CS TRMLOADTH(O bandwidth ptional) ratio Standard priority for SET GSM CS BSCBASIC(Opti high-priprity onal) MSs Number of neighboring cells that meet the following conditions: If "MBR" is indicated in a system message, the MS reports the number of neighboring cells at each frequency band. If the MS reports the number of neighboring cells at the same frequency band of the serving cell, it can report a maximum of the value of this parameter. SET These GCELLCCUTRA neighboring NSYS(Optional) cells must Whether to support the cell reselection from the GSM network to the TD SET network in GCELLPSOTHE the packet RPARA(Optional transmission ) mode.
None
None
0~100
per cent
80
Not involved
Not involved
Not involved
None
Transpor t
GBFD118605
IP QOS
1~15
None None
BSC69 10 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GBFD114401
0~3
None None
None
Cell
This parameter is valid when "MEASURETYPE" is set to Read & EnhMeasReport. Write
Not involved
Not involved
None
Equipme nt
GBFD114302
GSM/TDSCDMA Interoperability
Enumeration Type
None None
SUPPORT
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page120of316
150682621.xls.ms_office
Security Level:
GUARDTYP E
BSC6900
ADD Packet type ICMPGUARD(M against the andatory) ICMP attack When the BTS is accessed from the public network, the BTS security network IP ADD address must BTSAUTOPLAN( be Optional) configured. IP address of the BTS security gateway. This parameter needs to be configured when the BTS connects to the BSC through the SET public BTSIP(Optional) network.
None
None
ECHOREPLY, UNREACH, SOURCEQUENC H, REDIRECT, ECHO, ROUTERADVER T, ROUTERSOLICI T, TIMXCEED, PARAMPROB, TSTAMP, TSTAMPREPLY, IREQ, IREQREPLY, MASKREQ, MASKREPLY
ECHOREPLY, UNREACH, SOURCEQUENCH, REDIRECT, ECHO, ROUTERADVERT, ROUTERSOLICIT, TIMXCEED, PARAMPROB, TSTAMP, TSTAMPREPLY, IREQ, IREQREPLY, MASKREQ, MASKREPLY None None
None
Not involved
Not involved
Not involved
None
Transpor t
GWIP
BSC6900
GBFD118601
Abis over IP
IP Address Type
None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GWIP
BSC6900
GBFD118601
Abis over IP
IP Address Type
None
None
BTS
None
BTS
None
The BTS should be reset to validate the parameter modification. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
BSC6900
Whether to SET support CS OTHSOFTPARA half rate data GBFD(Optional) services 113401
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
BSC69 00 None
Not involved
Not involved
None
Radio
BSC6900
BSC6900
ATCB difference between the overlaid and underlaid subcells Duration of the handover from half rate to full rate. If the cell load is less than the preset threshold, the calls that meet the conditions for the handover from half rate to full rate are handed over from half rate to full rate in this duration.
GBFD510501
HUAWEI II Handover
0~255
dB
None
20 Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM2. Write
Not involved
Not involved
None
If this parameter is set to a greater value, only an MS close to the overlaid subcell can be assigned TCHHs. Thus, timeslots are wasted. If this parameter is set to a smaller value, an MS of bad quality on the edge of the The parameter modification overlaid subcell cannot be handed over has no impact on the from TCHH to TCHF. Thus, the voice Versions earlier than equipment. quality of the call is decreased. BSC6900 V900R011
Radio
GBFD510501
HUAWEI II Handover
0~600
None
5 Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM2. Write
Not involved
Not involved
None
Radio
BSC6900
According to the P/N rule, if the conditions for the handover from half rate to full rate are met for P seconds within N seconds, the handover is triggered. This parameter specifies the GBFDnumber P. 510501
HUAWEI II Handover
1~16
None
2 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "HALFTOFULLHOSTATT IME" >= "HALFTOFULLHOLASTT Read & IME". Write
Not involved
Not involved
None
If this parameter is set to a greater value, the TCHH-to-TCHF handover cannot be performed in time, thus the voice quality is decreased. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011 If this parameter is set to a greater value, only MSs in the center area of the overlaid subcell can be assigned TCHHs. Thus, timeslots are wasted and the congestion relieving capability is decreased. If this parameter is set to a smaller value, The parameter modification MSs on the edge of the overlaid subcell has no impact on the also use the TCHH. Thus, the voice Versions earlier than equipment. quality of the call is decreased. BSC6900 V900R011
Radio
BSC6900
GBFD510501
HUAWEI II Handover
0~255
dB
None
10 Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM2. Write
Not involved
Not involved
None
Radio
BSC6900
According to the P/N rule, if the conditions for the handover from half rate to full rate are met for P seconds within N seconds, the handover is triggered. This parameter specifies the GBFDnumber N. 510501
HUAWEI II Handover
1~16
None
3 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "HALFTOFULLHOSTATT IME" >= "HALFTOFULLHOLASTT Read & IME". Write
Not involved
Not involved
None
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a greater value, The parameter modification the handover cannot be performed in has no impact on the time, and thus the voice quality is Versions earlier than equipment. decreased. BSC6900 V900R011
Radio
HANDOVER CTHD
BSC6900
CPU usage threshold for handover control. When the average CPU usage of sliding windows reaches or exceeds the threshold, handover flow control is triggered. This parameter is valid only SET when "Board FCCPUTHD(Opti Class" is WRFDonal) "XPU". 040100 Packet queue usage threshold for handover control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, handover flow control is triggered. This parameter is valid only when "Board Class" is "XPU". CPU usage threshold for recovery from handover control. When the average CPU usage of sliding windows is lower than the threshold, handover flow control is stopped. This parameter is valid only when "Board Class" is Packet queue usage threshold for recovery from handover control. When the average packet queue usage of sliding windows is lower than the threshold, handover flow control is stopped. This parameter is valid only when "Board Class" is "XPU". to Whether control handover flow
Flow Control
30~100
per cent
None
95 Board
None
Not involved
Not involved
None
Equipme nt
HANDOVER CTHD
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
75 Board
None
Not involved
Not involved
None
Equipme nt
HANDOVER RTHD
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
85 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100 WRFD040100
Flow Control
30~100
per cent
None
65 Board
None
Not involved
Not involved
None
BSC6900
Flow Control
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
6/9/2013
Page121of316
150682621.xls.ms_office
Security Level:
HAVETT1
BSC6900
Whether to configure the SET TMA on BTSRXUBP(Opti antenna GBFDonal) tributary 1 111202 Whether to configure the SET TMA on BTSRXUBP(Opti antenna GBFDonal) tributary 2 111202 Heartbeat ADD interval when SCTPLNK(Optio the SCTP nal) server is idle. None Number of the cabinet where the head board ADD of the RXU BTSRXUCHAIN( chain or ring Mandatory) is located
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None NO
None
BTS
None
Not involved
Not involved
None
Equipme nt
HAVETT2
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
dB
NO
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
HBINTER
Heartbeat interval
BSC6900
None
1000~600000
ms
None
None
Not involved
Not involved
None
Transpor t
HCN
BSC6900
GBFD111202
O&M of BTS
0~62
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
HCSLASTTI ME
According to the P/N rule, if the conditions for the handover to a different micro cell due to fast movement are met in P of N measurement reports, the handover is triggered. This parameter specifies the GBFDnumber P. 510501 According to the P/N rule, if the conditions for the handover to a different micro cell due to fast movement are met in P of N measurement reports, the handover is triggered. This parameter specifies the GBFDnumber N. 510501
HUAWEI II Handover
1~16, step:0.5
None
2 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "HCSSTATTIME" >= Read & "HCSLASTTIME". Write
Not involved
Not involved
None
If this parameter is set to a greater value, the MS takes a longer time to meet the conditions for triggering the handover and the handover cannot be performed in time. Thus, call drops may occur or more handovers are triggered. If this parameter is set to a smaller value, the MS takes a shorter time to meet the The parameter modification conditions for triggering the handover, and has no impact on the thus network congestion may occur on the Versions earlier than equipment. macro cell. BSC6900 V900R011
Radio
HCSSTATTI ME
BSC6900
HUAWEI II Handover
1~16, step:0.5
None
3 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "HCSSTATTIME" >= Read & "HCSLASTTIME". Write
Not involved
Not involved
HDBKGDL
BSC6900
None
None
0~100
per cent
100
Not involved
Not involved
BSC6900
HSDPA background ADD service TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF13; transimssion type is dual stack or Hybird IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF13.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HDBKGSEC PATH
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HDCONVDL
BSC6900
WCDMA HSDPA conversation ADD al service TRMFACTOR(O downlink ptional) factor None
None
0~100
per cent
70
BSC69 70 00 None
Not involved
Not involved
None The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the
If this parameter is set to a greater value, congestion may occur in the macro cell. If this parameter is set to a smaller value, The parameter modification the handover cannot be performed in has no impact on the time. Thus, call drops may occur or more Versions earlier than equipment. handovers are triggered. BSC6900 V900R011
Radio
Transpor t
Transpor t
Transpor t
Transpor t
6/9/2013
Page122of316
150682621.xls.ms_office
Security Level:
BSC6900
HSDPA conversation ADD al service TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HDCONVSE CPATH
BSC6900
HSDPA conversation al service ADD bearer TRMMAP(Option secondary al) path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HDINTERDL
BSC6900
None
None
0~100
per cent
100
Not involved
Not involved
BSC6900
HSDPA high ADD PRI TRMMAP(Option interactive al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF23; transimssion type is dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF23.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
HSDPA low ADD PRI TRMMAP(Option interactive al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF23; transimssion type is dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF23.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
6/9/2013
Page123of316
150682621.xls.ms_office
Security Level:
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HDINTMIDP RIPATH
HSDPA ADD middle PRI TRMMAP(Option interactive al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF23; transimssion type is dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF23.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HDINTMIDS ECPATH
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HDSIPDL
None
None
0~100
per cent
15
BSC69 15 00 None
Not involved
Not involved
HSDPA IMS ADD signaling TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
6/9/2013
Page124of316
150682621.xls.ms_office
Security Level:
HDSRBDL
BSC6900
None
None
0~100
per cent
50
BSC69 50 00 None
Not involved
Not involved
BSC6900
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HDSRBSEC PATH
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HDSTRMDL
BSC6900
None
None
0~100
per cent
100
Not involved
Not involved
BSC6900
HSDPA streaming ADD service TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HDSTRMSE CPATH
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
BSC6900
WCDMA HSDPA voice ADD service TRMFACTOR(O downlink ptional) factor None
None
0~100
per cent
70
Not involved
Not involved
If the paramete r is modified, the transport layer bandwidt h admissio n of the subseque nce access The parameter modification service is has no impact on the affected. equipment. None
Transpor t
6/9/2013
Page125of316
150682621.xls.ms_office
Security Level:
BSC6900
HSDPA voice ADD service TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
HSDPA voice service ADD bearer TRMMAP(Option secondary al) path Threshold for interrupting the power supply to the TRXs. If the BTS works with the battery power supply, when the battery voltage is less than this threshold, the BTS interrupts the power supply to the TRXs to protect the lower-level SET BTSs from BTSBAT(Option being al) affected. Threshold for interrupting the power supply to the TMU. If the BTS works with the battery power supply, when the battery voltage is less than this threshold, the BTS SET interrupts the BTSBAT(Option power supply al) to the TMU.
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Transpor t
Transpor t
GBFD111202
O&M of BTS
0~65535
None None
None
BTS
None
Not involved
Not involved
This paramete r is supporte d only by the The parameter modification BTS3002 has no impact on the C. equipment. None
Equipme nt
GBFD111202
O&M of BTS
0~65535
None None
None
BTS
None
Not involved
Not involved
BSC6900
Type of a high frequency type supported by the BSC. Frequencies on DCS1800: 512-885 SET Frequencies BSCBASIC(Opti on PCS1900: GBFDonal) 512-810 110101 Full rate TCHs are assigned preferentially to the MSs with priority levels equal to or less than this threshold, except when the MSs SET request only GCELLCHMGBA half or full GBFDSIC(Optional) rate TCHs. 115001
Frequency Band
Enumeration Type
DCS1800, PCS1900
DCS1800
BSC69 00 None
Not involved
Not involved
This paramete r is supporte d only by the BTS3002 C. If the TRXs in a cell under this BSC are at a frequenc y on DCS180 0, this paramete r cannot be set to PCS1900 , and vice versa.
Equipme nt
Radio
BSC6900
Enhanced Multi Level Precedence and Preemption(EM LPP) Interval Type 1~14
1~14
None None
1 Cell
Not involved
Not involved
BSC6900
Whether to enable the prioritybased SET channel GCELLCHMGBA assignment SIC(Optional) algorithm Whether to enable load power-off against high temperature Whether to consider history priority records during channel assignment If this parameter is set to YES, the history priority records are considered. If this parameter is set to NO, the history priority records are not considered.
GBFD115001
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
The parameter modification has no impact on the None equipment. None When this paramete r is set to No, Highest Priority cannot be The parameter modification configure has no impact on the d. equipment. None
Radio
Radio
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111005
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
HMCDTM
Whether the cell supports the MS with SET the DTM GCELLGPRS(O multi-timeslot GBFDptional) capability. 119404
HMC DTM
Enumeration Type
None None
None
Cell
This parameter is valid only when "GPRS" is set to SupportAsInnPcu and "SUPPORTDTM" is set Read & to SUPPORT. Write
Not involved
Not involved
None
Equipme nt
6/9/2013
Page126of316
150682621.xls.ms_office
Security Level:
Whether to assign a channel in the overlaid or underlaid subcell in the case of the intra-BSC incoming handover to the concentric cell If this parameter is set to SysOpt, the measured BCCH of the target cell is included in the intra-BSC inter-cell handover request message. Then, the BSC compares the measured value with "RX_LEV GBFDThreshold" to 113201
SysOpt(System optimization), OSubcell(Overlai d subcell), USubcell(Underla id subcell), NoPrefer(No SysOpt, OSubcell, preference) USubcell, NoPrefer
None None
SysOpt
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
Radio
HOCDCMIN DWPWR
BSC6900
Min UL Level on Candidate Cell Specify Index of Cell Handover to Cell Name of Handover to
BSC6900
BSC6900
BSC6900
Whether to allow handover between different operators. If the BSC supports RAN sharing, MSs in a cell of this operator can be handed over to a cell ADD of other GCNOPERATO operators, or R(Optional) vice versa. If the downlink received signal level of a neighbor cell is greater than "Min DL Level on Candidate Cell" plus "Min Access Level Offset", the neighbor cell can be listed in the SET candidate GCELLHOBASI cell queue for C(Optional) handover. If the uplink received signal level of a neighbor cell is greater than "Min UL Level on Candidate Cell" plus "Min Access Level Offset", the neighbor cell can be listed in the SET candidate GCELLHOBASI cell queue for C(Optional) handover. Type of SET indexing the FHO(Mandatory) target cell Unique name SET of the target FHO(Mandatory) cell SET GCELLHOBASI C(Optional) SET GCELLHOEMG( Optional) SET GCELLHOFITPE N(Optional) SET GCELLHOIUO( Optional)
GBFD118701
RAN Sharing
Enumeration Type
NO(No), YES(Yes)
NO, YES
None NO
NO
BSC69 00 None
Not involved
Not involved
None
Equipme nt
GBFD110601 GBFD510501
0~63
dB
None
10 Cell
None
Not involved
Not involved
None
This parameter limits the number of candidate cells. If this parameter is set to a greater value, some desired cells may be excluded from the candidate cells and call drops may occur. If this parameter is The parameter modification set to a smaller value, an unwanted cell has no impact on the may become the candidate cell, thus Versions earlier than equipment. leading to handover failures or call drops. BSC6900 V900R011
Radio
O&M of BTS
Interval Type 0~63 0~63 BYCELLNAME(B Enumeration y cell name), BYCELLNAME, Type BYCGI(By CGI) BYCGI
dB
None
0 Cell
None
Not involved
Not involved
None
None None
None
Cell
None
Not involved
Not involved
None
O&M of BTS
String Type
None
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
This parameter limits the number of candidate cells. If this parameter is set to a greater value, some desired cells may be excluded from the candidate cells and call drops may occur. If this parameter is The parameter modification set to a smaller value, an unwanted cell has no impact on the may become the candidate cell, thus Versions earlier than equipment. leading to handover failures or call drops. BSC6900 V900R011 The parameter modification has no impact on the Versions earlier than equipment. None BSC6900 V900R011 The parameter modification has no impact on the Versions earlier than equipment. None BSC6900 V900R011
Radio
Radio
Radio
Configuration Management
Enumeration Type
HOALGORITHM 1(Handover algorithm I), HOALGORITHM 2(Handover HOALGORITHM1, algorithm II) HOALGORITHM2
None None
None
Cell
The value of this parameter must be the same as that of "HOCTRLSWITCH" in Read & "SET GCELLHOBASIC". Write
Not involved
Not involved
None
Radio
Handover directio forcast switch. When this parameter is set to YES, the BSC can forecast the handover direction of the call in fast handover so that the best target SET cell can be GCELLHOFAST( selected for GBFDOptional) handover. 510103 This parameter indicates P in the P/N rule for MS handover direction forcast. P/N rule: Among N handovers, the MS is handed over to Class B chain neighboring cell for successively P times, then the MBSC determines that the MS is moving to the Class B SET chain GCELLHOFAST( neighboring GBFDOptional) cell. 510103 This parameter indicates N in the P/N rule for MS handover direction forcast. P/N rule: Among N handovers, the MS is handed over to Class B chain neighboring cell for successively P times, then the MBSC determines that the MS is moving to the Class B SET chain GCELLHOFAST( neighboring GBFDOptional) cell. 510103 Fast handover can be triggered only when the downlink level of the SET serving cell is GCELLHOFAST( less than this Optional) parameter. According to the P/N rule, if the conditions for the handover to a better 3G cell are met for P seconds within N seconds, the SET handover is GCELLHOUTRA triggered. NFDD(Optional) This SET parameter GCELLHOUTRA specifies the NTDD(Optional) number P.
Enumeration Type
NO(No), YES(Yes)
NO, YES
None NO
NO
Cell
When parameter "Quick handover enable" is configured to "YES",then parameter "Handover Direction Forecast Enable" can be configured to "YES". Furthermore,before open "Handover Direction Forecast Enable", parameter "Chain Neighbour Cell Type" of cell should be configured Read & correctly. Write
Not involved
Not involved
None
If this parameter is set to YES, the The parameter modification probability of MS handover to the cell in has no impact on the the direction opposite to the moving equipment. direction during fast handover is reduced.
BSC6900 V900R011
Radio
0~16
None
3 Cell
"Handover Direction Forecast Statistic Times" >= "Handover Direction Read & Forecast Last Times" Write
Not involved
Not involved
None
The parameter modification If this parameter is set to a great value, has no impact on the there are strict restrictions on the equipment. judgement of the MS moving direction.
BSC6900 V900R011
Radio
0~16
None
3 Cell
"Handover Direction Forecast Statistic Times" >= "Handover Direction Read & Forecast Last Times" Write
Not involved
Not involved
None
The parameter modification If this parameter is set to a great value, has no impact on the there are strict restrictions on the equipment. judgement of the MS moving direction.
BSC6900 V900R011
Radio
BSC6900
GBFD510102
0~63
dB
None
50 Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
If this parameter is set to a smaller value, unnecessary handovers may be performed. The parameter modification If this parameter is set to a greater value, has no impact on the call drops may occur because the Versions earlier than equipment. handover may not be performed timely. BSC6900 V900R011
Radio
HODURT3G
BSC6900
GBFD110601 GBFD510501
1~16
None
4 Cell
This parameter is valid only when "BET3GHOEN" is set to YES. The following condition must be met: "HOSTAT3G" >= "HODURT3G".
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time. Thus, the voice quality is decreased and call drops may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
6/9/2013
Page127of316
150682621.xls.ms_office
Security Level:
The handover to a better 3G cell can be triggered only when the Ec/No of the 3G neighbor cell GBFDSET is greater 110601 GCELLHOUTRA than this GBFDNFDD(Optional) threshold. 510501 According to the P/N rule, if the conditions for fast handover are met in P of N measurement reports, the handover is triggered. This SET parameter GCELLHOFAST( specifies the GBFDOptional) number P. 510102
0~49
dB
None
35 Cell
This parameter is valid only when "INTERRATOUTBSCHO EN" is set to YES and "BET3GHOEN" is set to YES.
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time. Thus, the voice quality is decreased and call drops may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
BSC6900
1~32, step:0.5
None
3 Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "HOSTATICTIME" >= "HOLASTTIME".
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
HOMOD
Handover Scope
BSC6900
Type of handover in terms of connection transfer between chnnels or SET between FHO(Mandatory) cells Fast handover can be triggered only when the path loss difference between the serving cell and a ADD neighbor cell GEXT2GCELL( on the chain Optional) is equal to or SET greater than GCELLHOFAST( this Optional) parameter. If the cell is an enhanced concentric cell, this parameter with the current downlink received signal level and "UtoO HO Received Level Threshold" determines whether to assign a channel in the underlaid subcell to the intra-BSC incoming handover to the concentric cell or intraBSC intercell handover. If the cell is an ordinary SET concentric GCELLCHMGA cell, this D(Optional) parameter Whether to prefer a 2G or 3G cell as the handover target cell If this parameter is set to Pre_2G_Cell, the BSC prefers a 2G cell candidate as the handover target cell. If this parameter is set to Pre_3G_Cell, the BSC prefers a 3G cell candidate as the handover target cell. If this parameter is set to SET Pre_2G_Cell GCELLHOUTRA Thres, when NFDD(Optional) the received SET level of the GCELLHOUTRA first 2G NTDD(Optional) neighbor cell
GBFD111202
O&M of BTS
Enumeration Type
FREE(Free), INCELL(Intracell), OUTCELL(Outgo ing cell), OUTST(Outgoing site), OUTBSC(Outgoi ng BSC), OUTSYS(Outgoi FREE, INCELL, ng system), OUTCELL, OUTST, SPCELL(Specifie OUTBSC, OUTSYS, d cell) SPCELL None None
None
Cell
None
Not involved
Not involved
None
Radio
HOOFFSET
BSC6900
GBFD110601 GBFD510501
0~127
dB
None
68 Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
If this parameter is set to a greater value, call drops may occur because the handover may not be performed timely. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
HOOLRXLE VOFFSET
BSC6900
GBFD113201
0~61
dB
None
32 Cell
This parameter is valid only when "LOWRXLEVOLFORBID Read & SWITCH" is set to ON. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, call drops may occur because the handover may not be performed timely. The parameter modification If this parameter is set to a greater value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
HOOPTSEL
Inter-rat ho preference
BSC6900
GBFD110601 GBFD510501
Enumeration Type
Pre_2G_Cell(Pre ference for 2G cell), Pre_3G_Cell(Pre ference for 3G cell), Pre_2G_CellThre Pre_2G_Cell, s(Preference 2G Pre_3G_Cell, cell by thresh) Pre_2G_CellThres
None None
Pre_2G_CellThres
Cell
This parameter is valid only when "INTERRATOUTBSCHO EN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
Radio
BSC6900
An MS cannot be handed over from the underlaid subcell to the overlaid subcell in this duration after the MS is handed over from the overlaid subcell to the SET underlaid GCELLHOEDBP subcell GBFDARA(Optional) successfully. Index of the 114402 frequency hopping data, used for a TRX to locate the ADD frequency GCELLMAGRP( hopping GBFDMandatory) sequence 113701 SET GCELLMAIOPL AN(Mandatory) Logical number of GBFDthe MA group 117002
0~255
None
5 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell.
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the underlaid The parameter modification subcell. has no impact on the If this parameter is set to a smaller value, Versions earlier than equipment. ping-pong handovers may occur. BSC6900 V900R011
Radio
HOPINDEX
Hop Index
BSC6900
HOPINDEX
Hop Index
BSC6900
Frequency Hopping (RF hopping, baseband hopping) Interval Type 0~63 IBCA (Interference Based Channel Allocation) Interval Type 0~63
0~63
None None
None
Cell
None
Not involved
Not involved
Not involved
None
Radio
0~63
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
HOPMODE
Hop Mode
BSC6900
Implementati ADD on mode of GCELLMAGRP( frequency GBFDMandatory) hopping 113701 Whether to enable power boost before handover. When the receive level of an MS drops rapidly, a handover occurs. In this case, the BSC cannot adjust the transmit power of the MS and the BTS in time. The MS may fail to receive a handover command, thus leading to a call drop. If the value of this parameter is YES (StartUp), the transmit power of the SET BTS is GCELLOTHBASI adjusted to GBFDC(Optional) the maximum 117101
Enumeration Type
None None
None
Cell
None
Cell
The value of this paramete r must be the same as the attribute value of the TRX frequenc y hopping of this frequenc The cell should be reset to y hopping validate the parameter group. modification.
None
Radio
Enumeration Type
None None
YES
Cell
None
Not involved
Not involved
None
If this parameter is set to YES, the probability that the BTS transmits at full The parameter modification power increases. This increases the has no impact on the interference but the handover success equipment. rate also increases.
Radio
6/9/2013
Page128of316
150682621.xls.ms_office
Security Level:
HOPRETH2 G
BSC6900
If the received level of the first 2G neighbor cell candidate is equal to or less than this threshold, the BSC prefers a 3G cell candidate as the handover target cell. If the received level of the first 2G neighbor cell candidate is greater than this SET threshold, the GCELLHOUTRA BSC prefers NFDD(Optional) the 2G cell GBFDSET candidate as 110601 GCELLHOUTRA the handover GBFDNTDD(Optional) target cell. 510501 If this parameter is set to ON, the channel on a single frequency of an MA group is allocated SET to an MS OTHSOFTPARA with the non(Optional) FH attribute. Hoping sequence number (HSN) of a hopping antenna group. If the value of this parameter is 0, the services over a TRX are adjusted to other TRXs in the hopping antenna group in sequence. If this parameter is set to a value from 1 to 63, the services over a TRX are adjusted to other TRXs in the hopping antenna group in a ADD pseudoGCELLHOPANT random GRP(Optional) manner.
0~63
dB
None
25 Cell
Not involved
Not involved
None
Radio
BSC6900
GBFD113701
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
None
BSC69 00 None
Not involved
Not involved
None
Radio
HOPTRXHS N
BSC6900
GBFD113703
0~63
None
0 Cell
None
Cell
None
None
Equipme nt
BSC6900
HOPTYPE
Hop Type
BSC6900
TRX index that a hopping antenna index corresponds to. A hopping antenna enables signals of multiple TRXs to switch between several antennas instead of fixing an antenna for a TRX. This reduces the effect of Rayleigh fading on ADD signals of GCELLHOPANT some GBFDGRP(Mandatory) frequencies. 113703 Frequency hopping mode of the TRX. Frequency hopping assists in interference averaging and frequency diversity. If this parameter is set to RF_FH, the TX and RX parts of the TRX take part in the frequency hopping. In this case, the number of hopping frequencies can exceed the number of TRXs in the cell. If this SET parameter is GTRXHOP(Opti set to GBFDonal) BaseBand_F 113701 To avoid pingpong handover, the received signal of the original serving cell is decreased by "Quick handover punish value" ADD in "Quick GEXT2GCELL( handover Optional) punish time" GBFDSET after fast 110601 GCELLHOFAST( handover GBFDOptional) succeeds. 510501 Time for reserving the handover reference for one of the two BSCs ADD that collect AISSCFG(Optio the offset nal) information. The handover to a better 3G cell is triggered only when the RSCP of the 3G SET neighbor cell GCELLHOUTRA is greater NFDD(Optional) than this SET threshold GCELLHOUTRA during a NTDD(Optional) period. Whether an HO REQ ACK message contains the information element Speech Version during an SDCCH handover. If a signaling channel handover between BSCs fails, the value of this parameter may need to be adjusted.
0~23
None None
None
Cell
None
Not involved
Not involved
Not involved
None
Equipme nt
Enumeration Type
NO_FH(No Frequency Hopping), BaseBand_FH(B aseband Frequency Hopping), RF_FH(RF NO_FH, Frequency BaseBand_FH, Hopping) RF_FH
None None
None
TRX
This parameter depends on "FHMODE" in "SET GCELLHOPTP". This parameter can be set to BaseBand_FH only when "FHMODE" is set to BaseBand_FH or Hybrid_FH. This parameter can be set to RF_FH only when "FHMODE" is set to Read & RF_FH or Hybrid_FH. Write
Services will be disrupted if the handover fails after the parameter modification.
Cell
After this paramete r is modified, the services in the cell are handed over forcedly. The cell is reset (after ten seconds) after the handover succeeds . This protects the services from being The cell should be reset to interrupte validate the parameter d. modification.
If this parameter is set to "NO_FH", the anti-interference capability of the TRX is decreased.
Radio
BSC6900
0~63
dB
None
63 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, it is difficult for the MS to be handed over to the original cell, thus leading to call drop when there is no suitable neighboring cell. If this parameter is set to a smaller value, The parameter modification the MS is likely to be handed over to the has no impact on the original cell again, thus leading to pingVersions earlier than equipment. pong handovers. BSC6900 V900R011
Radio
BSC6900
GBFD118201
SoftSynchronized Network
1~60
min
15 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
BSC6900
GBFD110601 GBFD510501
0~63
dB
None
50 Cell
This parameter is valid only when "INTERRATOUTBSCHO EN" is set to YES and "BET3GHOEN" is set to YES.
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time. Thus, the voice quality is decreased and call drops may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
BSC6900
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
MSC
None
Not involved
Not involved
None
Radio
HOSTAT3G
BSC6900
According to the P/N rule, if the conditions for the handover to a better 3G cell are met in P of N measurement reports, the SET handover is GCELLHOUTRA triggered. NFDD(Optional) This GBFDSET parameter 110601 GCELLHOUTRA specifies the GBFDNTDD(Optional) number N. 510501
1~16
None
5 Cell
This parameter is valid only when "INTERRATOUTBSCHO EN" is set to YES and "BET3GHOEN" is set to YES. The following condition must be met: "HOSTAT3G" >= "HODURT3G".
Not involved
Not involved
None
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, The parameter modification the handover cannot be performed in has no impact on the time. Thus, the voice quality is decreased Versions earlier than equipment. and call drops may occur. BSC6900 V900R011
Radio
6/9/2013
Page129of316
150682621.xls.ms_office
Security Level:
BSC6900
According to the P/N rule, if the conditions for fast handover are met in P of N measurement reports, the handover is triggered. This SET parameter GCELLHOFAST( specifies the GBFDOptional) number N. 510102
1~32, step:0.5
None
4 Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "HOSTATICTIME" >= "HOLASTTIME".
Not involved
Not involved
None
If this parameter is set to a greater value, unnecessary handovers may be performed. The parameter modification If this parameter is set to a smaller value, has no impact on the call drops may occur because the Versions earlier than equipment. handover may not be performed timely. BSC6900 V900R011
Radio
HOSTTYPE
BSC6900
ADD OPC(Optional)
None
None
Enumeration Type
BSC69 00 None
BSC6900
Before the modificati on, the cell mapping table bound to the signaling point The parameter modification must be has no impact on the deleted. equipment. None
BSC6900 V900R011
Transpor t
HOSTTYPE
HostType
BSC6900
HOTHRES
Inter-layer HO threshold
BSC6900
BSC6900
BSC6900
SET Host type of BTSIP(Optional) an IP BTS Handover threshold during the handovers between cells on different layers or of different priorities. This value is used to suppress inter-layer ping-pong handovers. Inter-layer handover threshold of the serving cell = "Interlayer HO threshold" "Inter-layer HO Hysteresis"; Inter-layer handover ADD threshold of GEXT2GCELL( a neighboring Optional) cell = "InterSET layer HO GCELLHOBASI threshold" + C(Optional) "Adjacent Fast handover can be triggered only when the uplink signal level of the serving SET cell is less GCELLHOFAST( than this Optional) parameter. Whether to enable the TRX to support antenna hopping In a GSM cell, the BCCH broadcasts the frequency, frame number, system information, and paging group. If an MS is in an unfavorable position or the antenna of the main TRX that carries the BCCH fails, the MS receives poor broadcast control signals or SET even cannot GCELLHOPANT receive any (Optional) broadcast Whether to enable the TRX to support antenna hopping In a GSM cell, the BCCH broadcasts the frequency, frame number, system information, and paging group. If an MS is in an unfavorable position or the antenna of the main TRX that carries the BCCH fails, the MS receives poor broadcast control SET signals or GCELLHOPANT even cannot QUICKSETUP(M receive any andatory) broadcast The number of the optical port of the ADD head board BTSRXUCHAIN( in the RXU Mandatory) chain or ring. Maximum priority level of an MS that can use reserved channel resources. If the priority level of an MS is greater than this parameter, the MS is considered a low-priority MS. If the priority of an MS is equal to or less than this threshold, the MS is SET considered a GCELLCHMGBA high-priority SIC(Optional) MS.
GBFD113725
Enumeration Type
SINGLEHOST(Si ngle Host), PRIMHOST(Prim ary Host), SINGLEHOST, SLAVEHOST(Sla PRIMHOST, ve Host) SLAVEHOST
None None
None
BTS
When the BTS or cell is activated,the host type of OPC must be single or primary if the host type of BTS is single. Otherwise, the host type of OPC must be consistent with that of Read & the BTS. Write
BTS
GBFD110601 GBFD510501
0~63
dB
None
25 Cell
None
Not involved
Not involved
None Set this paramete r properly to ensure that hierarchic al handover and loadbased handover can function properly. During hierarchic al handover and loadbased handover , the downlink received level of the target cell must be greater than this threshold .
Equipme nt
Radio
GBFD510102
0~63
dB
None
50 Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
If this parameter is set to a smaller value, unnecessary handovers may be performed. The parameter modification If this parameter is set to a greater value, has no impact on the call drops may occur because the Versions earlier than equipment. handover may not be performed timely. BSC6900 V900R011
Radio
GBFD113703
Enumeration Type
None
Cell
None
Cell
None
Radio
GBFD113703
Enumeration Type
None None
None
Cell
None
Cell
None
Equipme nt
HPN
BSC6900
GBFD111202
O&M of BTS
0~5
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
HPRIOR
Highest Priority
BSC6900
GBFD116001
Resource Reservation
1~14
None None
1 Cell
This parameter is valid only when "GRADEACCALLOW" is Read & set to YES. Write
Not involved
Not involved
None
Radio
HPVFLAG
Whether to enable the configuration of power system parameters. In multi-mode scenario, the value of this parameter in this mode must be the SET same as the BTSAPMUBP(O value of the ptional) correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page130of316
150682621.xls.ms_office
Security Level:
HPVTHD
BSC6900
Load poweroff voltage threshold. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Whether to support the half-rate service in this cell. It is one of the cell reselection SET parameters GCELLCCCH(O in system ptional) messagethe 3. Whether downlink discontinuous transmission (DTX) function is enabled for half rate (HR) calls. This function is also restricted by the DTX switch in the MSC. If the MSC allows the downlink DTX for calls and the value of this parameter is YES, the downlink DTX is SET enabled for GCELLBASICPA HR calls of RA(Optional) cells. Whether to enable the BSC to assign half or full rate channels to MSs according to the channel seizure ratio in the SET overlaid and GCELLCHMGA underlaid D(Optional) subcells
O&M of BTS
None
None
BTS
The value of this parameter must be smaller than "DC Undervoltage Alarm Threshold".
Not involved
Not involved
None
Equipme nt
HRATESPT
BSC6900
GBFD113401
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
HRDLDTX
BSC6900
GBFD114801 GBFD113401
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
The discontinuous transmission (DTX) function allows a transmitter to stop power transmission in the case of no voice transfer. This function has the following benefits: In the uplink: decreasing the power consumption of the MS and reducing system interference In the downlink: decreasing power consumption of the BTS, reducing system interference, and reducing intermodulation inside the BTS The parameter modification From the network perspective, the interhas no impact on the frequency interference is reduced and the Versions earlier than equipment. network quality is improved. BSC6900 V900R011
Radio
GBFD113201
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
HRULDTX
HR Uplink DTX
BSC6900
Whether the uplink DTX function is enabled for HR calls. For GBFDSET details, see 114803 GCELLBASICPA GSM Rec. GBFDRA(Optional) 05.08. 113401 Hopping sequence number (HSN), indicating 64 types of frequency hopping sequences. If this parameter is set to 0, the frequency hopping is performed in sequence. If this parameter is set to a value from 1 to 63, the frequency hopping is performed in ADD a pseudoGCELLMAGRP( random GBFDOptional) manner. 113701 Number of the slot where the head board of the RXU chain or ring is located. The slot No. ADD is unique in BTSRXUCHAIN( the same Mandatory) BTS.
Enumeration Type
May_Use(May Use), Shall_Use(Shall Use), May_Use, Shall_NOT_Use( Shall_Use, Shall not Use) Shall_NOT_Use
None None
None
Cell
None
Not involved
Not involved
None
The discontinuous transmission (DTX) function allows a transmitter to stop power transmission in the case of no voice transfer. This function has the following benefits: In the uplink: decreasing the power consumption of the MS and reducing system interference In the downlink: decreasing power consumption of the BTS, reducing system interference, and reducing intermodulation inside the BTS The parameter modification From the network perspective, the interhas no impact on the frequency interference is reduced and the Versions earlier than equipment. network quality is improved. BSC6900 V900R011
Radio
HSN
HSN
BSC6900
0~63
None None
None
Cell
None
Cell
HSNs are optional for the cells with frequenc y hopping enabled. The cells in the same frequenc y group must use different HSNs. The HSNs of all the channels in a cell must be The cell should be reset to the validate the parameter same. modification.
None
Radio
HSN
BSC6900
GBFD111202
O&M of BTS
0~23
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
HSNSW
BSC6900
Whether dynamic use of HSNs is enabled. If the functions of frequency hopping and Flex MAIO are enabled in a cell and the value of this parameter is ON, adjacentchannel interference ADD between GCELL(Optional channels can GBFD) be reduced. 117001 Number of the subrack where the head board of the RXU chain or ring is located. The subrack ADD No. is unique BTSRXUCHAIN( in the same GBFDMandatory) BTS. 111202 Bidirectional ADD Forwarding BTSBFD(Mandat Detection GBFDory) Hop Type. 118609 If the ambient temperature is higher than "High Temperature Critical Point", the temperature control system controls the difference between the inlet and outlet temperatures . In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDHEUBP(Op in another MRFDtional) mode. 210304
Flex MAIO
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None OFF
OFF
Cell
This parameter is valid when "FHMODE" in the "SET GCELLHOPTP" command is not set to NO_FH.
Not involved
Not involved
None
Radio
HSRN
BSC6900
HT
Hop Type
BSC6900
Interval Type 0~254 0~254 SBFD(SINGLE_ HOP), Enumeration MBFD(MULTI_H Type OP) SBFD, MBFD
None None
None
None None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Equipme nt
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
HTCP
BSC6900
Faulty Management
-99~70
40 BTS
The value of this parameter must be greater than "Low Temperature Critical Point".
Not involved
Not involved
None
Equipme nt
6/9/2013
Page131of316
150682621.xls.ms_office
Security Level:
HTDO
BSC6900
If the outlet temperature is higher than "High Temperature Critical Point" and the difference between the outlet temperature and ambient temperature reaches the value of this parameter, the temperature control system controls the difference between the inlet and outlet temperatures . In multi-mode scenario, the value of this parameter in SET this mode BTSDHEUBP(Op must be the MRFDtional) same as the 210304 Whether to enable battery power-off against high MRFDtemperature. 210304
Faulty Management
0~30
13 BTS
None
Not involved
Not involved
None
Equipme nt
HTSDF
BSC6900
Faulty Management
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
BSC6900
HSUPA background ADD service TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF13; transimssion type is dual stack or Hybird IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF13.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HUBKGSEC PATH
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HUBKGUL
BSC6900
WCDMA HSUPA ADD background TRMFACTOR(O service uplink ptional) factor None
None
0~100
per cent
100
Not involved
Not involved
BSC6900
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HUCONVSE CPATH
BSC6900
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
None The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Equipme nt
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
6/9/2013
Page132of316
150682621.xls.ms_office
Security Level:
HUCONVUL
BSC6900
WCDMA HSUPA ADD conversation TRMFACTOR(O al service ptional) uplink factor None
None
0~100
per cent
70
BSC69 70 00 None
Not involved
Not involved
HUINTERUL
BSC6900
WCDMA HSUPA ADD interactive TRMFACTOR(O service uplink ptional) factor None
None
0~100
per cent
100
Not involved
Not involved
BSC6900
HSUPA high ADD PRI TRMMAP(Option interactive al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF23; transimssion type is dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF23.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
HSUPA low ADD PRI TRMMAP(Option interactive al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF23; transimssion type is dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF23.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
6/9/2013
Page133of316
150682621.xls.ms_office
Security Level:
HUINTMIDP RIPATH
HSUPA ADD middle PRI TRMMAP(Option interactive al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF23; transimssion type is dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF23.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HUINTMIDS ECPATH
HSUPA middle PRI interactive secondary path BSC6900 Enable Humidity Alarm Reporting
HSUPA middle PRI ADD interactive TRMMAP(Option secondary al) path ADD EMU(Optional)
None
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL CLOSE(Close), OPEN(Open)
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write Read & Write
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Transpor t
HUM_MASK
BSC6900
Humidity MRFDalarm switch 210304 Upper limit of humidity. When the humidity exceeds the upper limit, a humidity alarm is MRFDreported. 210304 Lower limit of humidity. When the humidity is lower than the lower limit, a humidity alarm is MRFDreported. 210304 When the ambient humidity of the APMU is greater than the value of this parameter, the BTS reports an overhigh ambient humidity alarm. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another MRFDmode. 210304
CLOSE, OPEN
None OPEN
None
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Equipme nt
BSC6900
ADD EMU(Optional)
Faulty Management
String Type
None
1~9 characters
per cent
80 None
Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Faulty Management
String Type
None
1~9 characters
per cent
10 None
Board
None
Not involved
Not involved
None
Equipme nt
Faulty Management
None None
If "APMU Board Type" is "SC48200", the recommended value is "900". For other types of APMU boards, the recommended value is "1000".
BTS
The value of this parameter must be greater than "Lower Threshold of Humidity Alarm".
Not involved
Not involved
None
Equipme nt
When the ambient humidity is greater than the value of this parameter, the BTS reports an overhigh ambient humidity alarm. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another MRFDptional) mode. 210304 When the ambient humidity of the APMU is less than the value of this parameter, the BTS reports an overlow ambient humidity alarm. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another MRFDmode. 210304
Faulty Management
None None
800 BTS
The value of this parameter must be greater than "Lower Threshold of Humidity Alarm".
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
None None
If "APMU Board Type" is "SC48200", the recommended value is "100". For other types of APMU boards, the recommended value is "0".
BTS
The value of this parameter must be smaller than "Upper Threshold of Humidity Alarm".
Not involved
Not involved
None
Equipme nt
BSC6900
When the ambient humidity is less than the value of this parameter, the BTS reports an overlow ambient humidity alarm. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another MRFDptional) mode. 210304
Faulty Management
None None
100 BTS
The value of this parameter must be smaller than "Upper Threshold of Humidity Alarm".
Not involved
Not involved
None
Equipme nt
6/9/2013
Page134of316
150682621.xls.ms_office
Security Level:
HSUPA IMS ADD signaling TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HUSIPUL
None
None
0~100
per cent
15
BSC69 15 00 None
Not involved
Not involved
BSC6900
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HUSRBUL
None
None
0~100
per cent
50
BSC69 50 00 None
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
6/9/2013
Page135of316
150682621.xls.ms_office
Security Level:
BSC6900
HSUPA streaming ADD service TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HUSTRMSE CPATH
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
HUSTRMUL
BSC6900
WCDMA HSUPA ADD streaming TRMFACTOR(O service uplink ptional) factor None
None
0~100
per cent
100
Not involved
Not involved
BSC6900
HSUPA voice ADD service TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
HSUPA voice service ADD bearer TRMMAP(Option secondary al) path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
WCDMA ADD HSUPA voice TRMFACTOR(O service uplink ptional) factor None
None
0~100
per cent
70
BSC69 70 00 None
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
HYSON
Hysteresis for On
BSC6900
Delay for which the BTS waits to SET switch on the BTSAIRCON(Op air GBFDtional) conditioner 111202
O&M of BTS
1~30
min
None
15 BTS
None
Not involved
Not involved
This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
6/9/2013
Page136of316
150682621.xls.ms_office
Security Level:
IARXTMR
Inactive RX timer
BSC6900
IASUDURAT Duration
BSC6900
This timer is started after a connection is established successfully. If a detection message is not received when this timer expires, the connection will be released. None Duration in IASU mode GBFD111207
180~1260
None
720 SCCP
None
Not involved
Not involved
Interval Type 1~60 E1PORT0(E1 PORT0), E1PORT1(E1 PORT1), E1PORT2(E1 PORT2), E1PORT3(E1 PORT3), OPTICALPORT0 (OPTICAL PORT0), OPTICALPORT1 (OPTICAL PORT1)
1~60
min
None
None
None
None
Not involved
Not involved
For details of the timer, see ITUT Q.714. The modificati on is not The parameter modification recomme has no impact on the nded. equipment. None The parameter modification has no impact on the None equipment. None
Transpor t Equipme nt
BSC6900 V900R011
IASUPORT
Port No.
BSC6900
Port number in IASU mode. For the BTS3002C, the port number cannot be set to GBFD"E1PORT3". 118601
Abis over IP
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
IASUSLCTT MU
TMU Type
BSC6900
Type of the TMU in IASU GBFDmode 111202 This timer is started after a connection is established successfully. When this timer expires, a detection message will be sent to the peer end. None Minimum C/I ratio that IBCA AMR FR services allow. An idle channel can be assigned to such a service only when the C/I ratio of the idle channel is greater than this threshold. In addition, a new call associated with such a service can be established only when the call does not decrease the C/I ratio of the established calls to a value less than this GBFDthreshold. 117002 Minimum C/I ratio that IBCA AMR HR services allow. An idle channel can be assigned to such a service only when the C/I ratio of the idle channel is greater than this threshold. In addition, a new call associated with such a service can be established only when the call does not decrease the C/I ratio of the established calls to a value less than this threshold. Whether to enable the IBCA algorithm
O&M of BTS
Enumeration Type
MAINDOMU(MAI N DOMU), SLAVEDOMU1( SLAVE DOMU1), MAINDOMU, SLAVEDOMU2( SLAVEDOMU1, SLAVE DOMU2) SLAVEDOMU2
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
IATXTMR
Inactive TX timer
BSC6900
None
60~600
None
90 SCCP
None
Not involved
Not involved
For details of the timer, see ITUT Q.714. The modificati on is not The parameter modification recomme has no impact on the nded. equipment. None
Transpor t
BSC6900
0~23
dB
None
4 Cell
This parameter is valid only when "IBCASOFTBLKSWITCH Read & " is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, The parameter modification the network interference is increased; if has no impact on the this parameter is set to a greater value, Versions earlier than equipment. congestion may occur in the cell. BSC6900 V900R011
Radio
BSC6900
GBFD117002
BSC6900
GBFD117002
IBCA (Interference Based Channel Allocation) Interval Type 0~23 IBCA (Interference Based Channel Enumeration NO(No), Allocation) Type YES(Yes)
0~23
dB
None
10 Cell
This parameter is valid only when "IBCASOFTBLKSWITCH Read & " is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, The parameter modification the network interference is increased; if has no impact on the this parameter is set to a greater value, Versions earlier than equipment. congestion may occur in the cell. BSC6900 V900R011 The parameter modification has no impact on the equipment. None
Radio
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Length of the timer for a new call to wait for the measurement report (MR) on the signaling channel when dynamic measurement of the BA2 list is enabled during assignment. If this parameter is set to 0, dynamic measurement of the BA2 list is not enabled during GBFDassignment. 117002 Number of measurement reports sampled for averaging path loss. A single measurement report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurement reports to reflect the radio GBFDenvironment. 117002 When the IBCA algorithm is enabled, this parameter is used to calculate the actual soft blocking threshold of an existing call. The formula is as follows: Actual soft blocking threshold of an existing call = Configured soft blocking threshold of an existing call - IBCA Set-up Call Soft Block Thres Offset. None
None
4 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, The parameter modification the call duration is prolonged; if this has no impact on the parameter is set to a smaller value, the equipment. IBCA estimation accuracy is reduced. BSC6900 V900R011
Radio
BSC6900
ms
None
4 Cell
None
Not involved
Not involved
None
Radio
IBCACALLS IBCA Set-up Call OFTBLOCKT Soft Block Thres HOFFSET Offset
BSC6900
None
0~14
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page137of316
150682621.xls.ms_office
Security Level:
BSC6900
IBCADLPAT HLOSSOFF
BSC6900
IBCADYNCM IBCA Dyn Measure EASURENCE Neighbour Cell LLALLOWED Flag BSC6900
BSC6900
When the IBCA algorithm is enabled, this parameter is used to calculate the target CIR of an existing call. The formula is as follows: Target CIR of an existing call = Target CIR in use + Target CIR SET Offset of GCELLCHMGA IBCA Set-Up D(Optional) Call. Difference between uplink and downlink path losses, which is used to estimate the downlink path loss of a call when the downlink path loss cannot be computed directly according to a measurement report. This parameter is configured according to the combined loss and hierarchical dual-antenna gain (3 dB) of the BTS. "IBCA Downlink Path Loss Offset" = SET combined GCELLCHMGA loss of BTS D(Optional) + hierarchical Whether to measure the IBCA neighbor cells of the serving cell dynamically. If the dynamic measurement is enabled, when a call uses a channel, the BSC sends the SACCH Modify message to modify the frequencies in the BA2 table in System Information 5, 5bis, and 5ter to the frequencies at which the IBCA neighbor cells operate. ADD Thus, the call G2GNCELL(Opti measures onal) and reports Length of the timer for a call to measure the path loss in the neighboring cell with strong interference of the target cell. The call to be handed over needs to measure the path loss before initiating the handover to the target cell when dynamic measurement of the BA2 list is enabled during the emergency handover. When this parameter is set to 0, SET dynamic GCELLCHMGA measurement D(Optional) of the BA2
None
None
0~14
dB
None
4 Cell
None
Not involved
Not involved
None
Radio
GBFD117002
0~63
dB
None
None
Cell
None
Not involved
Not involved
None
Radio
GBFD117002
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
GBFD117002
None
0 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, the handover duration is prolonged and thus the handover cannot be performed in The parameter modification time; if this parameter is set to a smaller has no impact on the value, the IBCA estimation accuracy is equipment. reduced. BSC6900 V900R011
Radio
IBCAFLEXT SCALLOWE D
BSC6900
Whether the IBCA flexible TSC function is enabled. When this parameter is set to NO, the flexible TSC function is disabled and the configured TSC is used. When the BTS supports Flex TSC and this parameter is set to YES, the flexible TSC function GBFDis enabled. 117002 Whether the IBCA forced BTS synchronizati on is allowed. When this parameter is set to YES, the synchronizati on procedure is performed even though the BTSs are insynchronou s. When this parameter is set to NO, the existing procedure, either the synchronizati on procedure or the out-ofsynchronizati on procedure, is performed as required. Note that the synchronizati on status of GBFDthe IBCA 117002 Minimum C/I ratio that IBCA FR/EFR services allow. An idle channel can be assigned to such a service only when the C/I ratio of the idle channel is greater than this threshold. In addition, a new call associated with such a service can be established only when the call does not decrease the C/I ratio of the established calls to a value less than this GBFDthreshold. 117002
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
None
Radio
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
None
Radio
0~23
dB
None
10 Cell
None
Not involved
Not involved
None
If this parameter is set to a smaller value, The parameter modification the network interference is increased; if has no impact on the this parameter is set to a greater value, Versions earlier than equipment. congestion may occur in the cell. BSC6900 V900R011
Radio
6/9/2013
Page138of316
150682621.xls.ms_office
Security Level:
BSC6900
Length of the timer for a call to wait for other valid MRs after receiving the first valid MR of the target cell if dynamic measurement of the BA2 list is enabled during handover. When this parameter is set to 0, the call does not wait for other MRs after receiving the first MR of the target GBFDcell. 117002 Minimum C/I ratio that IBCA HR services allow. An idle channel can be assigned to such a service only when the C/I ratio of the idle channel is greater than this threshold. In addition, a new call associated with such a service can be established only when the call does not decrease the C/I ratio of the established calls to a value less than this GBFDthreshold. 117002 In the ICDM matrix algorithm, the signal strength (063) is divided into 10 levels. The signal strength that is smaller than or equal to the value of this parameter is at the initial level. None Whether to enable the ICDM algorithm for the cell. The ICDM algorithm helps to improve the precision in estimating the path loss of an IBCA neighbor cell and to increase the efficiency of the IBCA GBFDalgorithm. 117002
None
2 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, the handover duration is prolonged and thus the handover cannot be performed in The parameter modification time; if this parameter is set to a smaller has no impact on the value, the IBCA estimation accuracy is equipment. reduced. BSC6900 V900R011
Radio
BSC6900
0~23
dB
None
13 Cell
None
Not involved
Not involved
None
If this parameter is set to a smaller value, The parameter modification the network interference is increased; if has no impact on the this parameter is set to a greater value, Versions earlier than equipment. congestion may occur in the cell. BSC6900 V900R011
Radio
BSC6900
None
0~31
dB
None
10 Cell
None
Not involved
Not involved
None
Radio
IBCAICDMS WITCH
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
IBCAINBSCI NFORPTPR D
Period of information exchange between the BSC boards. The information helps to estimate the SET C/I ratio for OTHSOFTPARA the IBCA GBFD(Optional) algorithm. 117002 Adds a specified offset to the downlink target receive level when power control algorithm III is used to calculate the initial transmit power of a BTS in the GBFDIBCA function 117002 Adds a specified offset to the uplink target receive level when power control algorithm III is used to calculate the initial transmit power of an MS in the IBCA function Adds a specified offset to the downlink target receive quality when power control algorithm III is used to calculate the initial transmit power of a BTS in the IBCA function
2~600
None
BSC69 4 00 None
Not involved
Not involved
None
If this parameter is set to a greater value, the accuracy of interference assessment in the IBCA algorithm may be reduced; if The parameter modification this parameter is set to a smaller value, has no impact on the the CPU occupancy for IBCA algorithm is Versions earlier than equipment. increased. BSC6900 V900R011
Radio
BSC6900
0~63
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD117002
0~63
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
GBFD117002
0~22
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
BSC6900
Adds a specified offset to the uplink target receive quality when power control algorithm III is used to calculate the initial transmit power of an MS in the GBFDIBCA function 117002 In an IUO cell (or a CoBCCH cell), the path loss of an MS to the serving cell or a neighboring cell measured on the underlay is used together with this parameter to estimate the path loss on the overlay. IUO path loss compensatio n = Combiner insert loss difference + Path loss difference due to the use of different antennas + Path loss difference GBFDdue to 117002
0~22
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
0~63
dB
None
4 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page139of316
150682621.xls.ms_office
Security Level:
BSC6900
Determines the MAIO selection method for each timeslot. The Optimal MAIO policy selects the optimal MAIO being evaluated, while the Random MAIO policy randomly selects a MAIO out of qualified GBFDMAIOs. 117002 The IBCA interference evaluation process only considers the interference of the strongest N existing calls on the newlyestablished call being evaluated. This parameter corresponds to the above- GBFDmentioned N. 117002
None None
0 Cell
None
Not involved
Not involved
None
Radio
IBCAMAXIN TFSRCNUM
BSC6900
5~40
None None
20 Cell
None
Not involved
Not involved
None
Radio
IBCANCELL FLAG
BSC6900
BSC6900
IBCANONME IBCA Non ANCELLSTA Measurement Ncell TNUM Stat. Num BSC6900
BSC6900
Indicates whether this neighboring cell is the IBCA neighboring cell of the serving cell. That is, when a cell is configured as the neighboring cell of the serving cell, whether the IBCA algorithm considers the interference between the serving cell ADD and the G2GNCELL(Opti neighboring onal) cell. Estimates the receive level of the unmeasured IBCA neighboring cells. When a consecutive "IBCA Non Measuremen t Ncell Stat. Num" measurement reports cover less than six neighboring cells (or the number of the reported neighboring cells is smaller than that of the actually configured neighboring cells), this parameter is used to estimate the receive level SET of the GCELLCHMGA unmeasured D(Optional) IBCA When the IBCA algorithm is enabled, this parameter is used to calculate the target CIR of a new call. The formula is as follows: Target CIR of a new call = Target CIR in use + Target CIR SET Offset of GCELLCHMGA IBCA New D(Optional) Call Length of the timer for a call to measure the path loss in the neighboring cell with strong interference of the target cell. The call to be handed over needs to measure the path loss before initiating the handover to the target cell when dynamic measurement of the BA2 list is enabled during the normal handover. When this parameter is set to 0, SET dynamic GCELLCHMGA measurement D(Optional) of the BA2 Estimates the receive level of the unmeasured IBCA neighboring cells. When a consecutive "IBCA Non Measuremen t Ncell Stat. Num" measurement reports cover less than six neighboring cells (or the number of the reported neighboring cells is smaller than that of the actually configured neighboring cells), this parameter is used to estimate the receive level SET of the GCELLCHMGA unmeasured D(Optional) IBCA When the IBCA algorithm is enabled and the HSN is not 0, the IBCA priority and the SDCCH/PDC H priority are divided by this corrected factor respectively to reduce the weight of IBCA priority. In addition, the priority of the SET interference GCELLCHMGA band is D(Optional) considered.
GBFD117002
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
The paramete r IBCA Allowed of the serving cell and the neighbor cell should be set to Yes before the configura tion of this The parameter modification paramete has no impact on the r. equipment. None
Radio
GBFD117002
0~63
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
None
None
0~30
dB
None
7 Cell
None
Not involved
Not involved
None
Radio
GBFD117002
None
9 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, the handover duration is prolonged and thus the handover cannot be performed in The parameter modification time; if this parameter is set to a smaller has no impact on the value, the IBCA estimation accuracy is equipment. reduced. BSC6900 V900R011
Radio
GBFD117002
0~16
None None
4 Cell
None
Not involved
Not involved
None
Radio
None
None
0~63
None None
0 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page140of316
150682621.xls.ms_office
Security Level:
BSC6900
Specifies a period during which the inter-BSC information exchange must be completed. The information is mainly used SET by IBCA for OTHSOFTPARA C/I ratio GBFD(Optional) estimation. 117002 When the path loss of an MS to a neighboring cell cannot be measured based on the existing measurement results, it is estimated based on the path loss of the MS to the serving cell plus the IBCA path GBFDloss offset. 117002
2~600
None
BSC69 8 00 None
Not involved
Not involved
None
If this parameter is set to a greater value, the accuracy of interference assessment in the IBCA algorithm may be reduced; if The parameter modification this parameter is set to a smaller value, has no impact on the the CPU occupancy for IBCA algorithm is Versions earlier than equipment. increased. BSC6900 V900R011
Radio
IBCAPATHL OSSOFF
BSC6900
0~50
dB
None
It is recommended that you set the path loss offset of layer 1 neighboring cells of the serving cell to 15 dB and that of other neighboring cells to 25 dB.
Cell
None
Not involved
Not involved
None
Radio
BSC6900
IBCARXLEV OFFSET
Considers the influence of history path loss information during the calculation of the ICDM algorithm path loss. The smaller the filtering coefficient, the smaller the influence of history path loss; on the other hand, the larger the filtering coefficient, the larger the SET influence of GCELLCHMGA history path GBFDD(Optional) loss. 117002 Estimates the receive level of the unmeasured IBCA neighboring cells. When a consecutive "IBCA Non Measuremen t Ncell Stat. Num" measurement reports cover less than six neighboring cells (or the number of the reported neighboring cells is smaller than that of the actually configured neighboring cells), this parameter is used to estimate the receive level ADD of the G2GNCELL(Opti unmeasured GBFDonal) IBCA 117002 Use this parameter when the path loss of an MS to serving cells cannot be measured based on the existing measurement GBFDresults. 117002 MSs that support SAIC can tolerate a lower carrier-tointerference ratio. This variable indicates the downward adjustment step of the soft blocking threshold of GBFDSAIC MSs. 117002 Whether to deny the access of a call when none of the MAIO evaluation results meets the C/I ratio requirement of the call during channel assignment. Whether the handover of the calls on the single channels is allowed (single channels are the two halfrate subchannels on a timeslot, in which only one is in the occupied state) when single channels are to be adjusted to a full-rate channel. When this parameter is set to YES, the handover of the calls on the single channels is allowed; if this parameter is set to NO, the handover
0~10
None None
6 Cell
None
Not involved
Not involved
None
Radio
0~63
dB
None
4 Cell
None
Not involved
Not involved
None
Radio
IBCASCELL PATHLOSS
BSC6900
0~160
dB
None
110 Cell
None
Not involved
Not involved
None
Radio
BSC6900
0~23
dB
None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD117002
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
The parameter modification If this parameter is set to YES, cell has no impact on the congestion may occur when the equipment. interference is strong.
Radio
GBFD117002
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
None
Radio
Whether a MAIO meets the access requirement. When the C/I ratio of a MAIO is higher than this threshold, the MAIO can be assigned to the call being GBFDprocessed. 117002
0~63
None None
20 Cell
None
Not involved
Not involved
None
Radio
Whether to enable the IBCA algorithm for the overlay and underlay of an IUO GBFDcell. 117002
NO(Disabled in OL and UL subcell), UNDER(Enabled in UL subcell), INNER( Enabled in OL subcell), YES(Enabled in OL and UL NO, UNDER, INNER, subcell) YES None None
UNDER
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page141of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether a single IBCA MS can dynamically measure the neighboring cells. When this parameter is set to YES, the neighboring cells where "IBCA Dynamic Measure Neighbor Cell Flag" is set to YES are dynamically measured. Dynamic measurement on neighboring cells is mutually exclusive to directed retry. When this parameter is set to YES, it GBFDis 117002 The lowest C/I ratio that can be tolerated by IBCA WAMR FR. The C/I ratio of an idle channel must be larger than this parameter. Otherwise, it cannot be assigned. In addition, the system does not allow a newlyestablished call causing the C/I ratio of existing calls to be lower than this GBFDparameter. 117002
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
BSC6900
0~23
dB
None
5 Cell
None
Not involved
Not involved
None
If this parameter is set to a smaller value, The parameter modification the network interference is increased; if has no impact on the this parameter is set to a greater value, Versions earlier than equipment. congestion may occur in the cell. BSC6900 V900R011
Radio
ICBALLOW
ICB Allowed
BSC6900
This parameter specifies whether to enable the ICB function in the BTS. If this parameter is set to Yes, the TCHs on the same module on the nonBCCH TRXs are preferentially assigned. In this way, the TRXs on the same module on the BCCH are idle and thus the ICB SET function can GCELLBASICPA be enabled in GBFDRA(Optional) the BTS. 111604 Whether to enable the intelligent control of the diesel engine. If this parameter is set to ENABLE, the PMU will control the diesel engine automatically according to the settings of the parameters to save the energy. This parameter is set to ENABLE by GBFDdefault. 111202
Enumeration Type
None None
NO
Cell
None
Not involved
Not involved
None
Equipme nt
ICF
BSC6900
O&M of BTS
Enumeration Type
ENABLE
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
ICMP packet length. It is the total length of the ICMP packet ADD containing IPPATH(Optional the IP ) header. None DSP correspondin g to the interaction service with SET the THP level BSCPSTCDSCP of GBFDMAP(Optional) PRIORITY1. 118603 DSP correspondin g to the interaction service with SET the THP level BSCPSTCDSCP of GBFDMAP(Optional) PRIORITY2. 118603 DSP correspondin g to the interaction service with SET the THP level BSCPSTCDSCP of GBFDMAP(Optional) PRIORITY3. 118603 ADD SCHTSK(Mandat ory) SET SCHTSKSW(Opt ional) ADD SUBTSK(Option al) ADD SUBCMD(Option al)
None
44~1024
byte
64
When the value of "PATHCHK" in "ADD IPPATH" is set to ENABLED, this 64 IP path parameter is valid.
Not involved
Not involved
When the network status is poor, the packet length should not be too large. Otherwis e, the path The parameter modification state is has no impact on the affected. equipment. None
Transpor t
ICTHP1DSC P
BSC6900
Gb over IP
0~63
None None
22 BSC
None
Not involved
Not involved
Not involved
None
Transpor t
ICTHP2DSC P
BSC6900
Gb over IP
0~63
None None
20 BSC
None
Not involved
Not involved
Not involved
None
Transpor t
ICTHP3DSC P
BSC6900
Gb over IP
0~63
None None
18 BSC
None
Not involved
Not involved
Not involved
None
Transpor t
ID
Task ID
BSC6900
ID
Task ID
BSC6900
ID
Index
BSC6900
Idle_Code
Idle Code
BSC6900
IDLECODE
Idle code
BSC6900
Number of the scheduled task Number of STR the SCHTSK(Option scheduled al) task ADD BTSBRDCAP(M andatory) Index This parameter indicates the idle code of the A interface. It is used for the SET interconnecti TCPARA(Option on of the A al) interfaces. SET E1T1LOP(Optio nal) IDLE code
GBFD111203
O&M of BSC
1~30
None None
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
GBFD111203 GBFD111202
O&M of BSC
None None
None
RNC
None
Not involved
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
O&M of BTS
0~65535
None None
None
BTS
None
Not involved
Not involved
None
GBFD118602
A over IP
0~255
None None
None
Board
None
Not involved
Not involved
None
None
None
0~255
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
IDLESDTHR ES
BSC6900
When the number of idle SDCCH channels in a cell is smaller than this parameter, the system searches for available TCHs and transforms SET them into GCELLCHMGBA SDCCH GBFDSIC(Optional) channels. 113001
0~63
None None
2 Cell
This parameter is one of the conditions for the dynamic conversion of the TCHF to the SDCCH. In addition to the condition that the number of idle SDCCHs should be smaller than or equal to "IDLESDTHRES", the following three conditions must be met to trigger the conversion from the TCHF to the SDCCH: 1. "SDDYN" in "SET GCELLBASICPARA" is set to YES. 2. In the cell, the value of (number of idle TCHFs + number of idle TCHHs/2) is greater than four and is greater than the number of TRXs. Idle TCHFs exist in the cell. 3. Number of SDCCHs + Read & 8 < "CELLMAXSD". Write
Not involved
Not involved
None
If this parameter is set to a greater value and consequently there is a small number of requests for SDCCHs, the SDCCHs of a cell are in idle state and the TCH traffic volume during busy time is decreased. if this parameter is set to a smaller value and consequently there is a large number The parameter modification of requests for SDCCHs, the requests has no impact on the cannot be met and the access success Versions earlier than equipment. rate is decreased. BSC6900 V900R011
Radio
6/9/2013
Page142of316
150682621.xls.ms_office
Security Level:
IDTYPE
Index Type
BSC6900
SET BTSEXCURSIO N(Mandatory) ADD EXTNCELL(Man datory) SET BSCSYNCOFF( Mandatory) SET BTSAISS(Manda tory) Index type. SET BTSABISPRIMA P(Mandatory) ADD BTSESN(Mandat ory) ADD GCELLFREQ(M andatory) ADD GCELLHOPANT GRP(Mandatory) ADD GCELLMAGRP( Mandatory) ADD GCELLOSPMAP (Mandatory) SET GCELLAMRQUL (Mandatory) SET GCELLBASICPA RA(Mandatory) SET GCELLCCACCE SS(Mandatory) SET GCELLCCAD(M andatory) SET GCELLCCTMR( Mandatory) SET GCELLCCUTRA NSYS(Mandator y) SET GCELLEXTMSR PARA(Mandator
GBFD111202
O&M of BTS
Enumeration Type
BYIDX, BYNAME
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
IDTYPE
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
IDTYPE
Index Type
BSC6900
Type of an index
MRFD210301
Configuration Management
Enumeration Type
BYNAME(By Name), BYID(By Index) BYNAME, BYID BYNAME(By name), BYID(By index), BYCGI(By CGI)
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
IDTYPE
Index Type
BSC6900
ADD G2GNCELL(Man datory) Index type SET GCELLHOINTE RRATLDB(Mand atory) ADD PTPBVC(Mandat ory) SET GCELLEGPRSP ARA(Mandatory) SET GCELLGPRS(M andatory) SET GCELLPRACH( Mandatory) SET GCELLPRIVATE OPTPARA(Mand atory) SET GCELLPSBASE( Mandatory) SET GCELLPSCHM( Mandatory) SET GCELLPSCS(M andatory) SET GCELLPSI1(Ma ndatory) SET GCELLPSOTHE RPARA(Mandato ry) SET GCELLPSPWPA SET BTSFMUABP(M andatory) SET BTSNFCBBP(Ma ndatory) SET BTSPMUBP(Ma ndatory) SET BTSAPMUBP(M andatory) SET BTSDATUBP(Ma ndatory) SET BTSDEMUBP(M andatory) SET BTSDFCUBP(M andatory) SET BTSDHEUBP(M andatory) SET BTSDOMUBP(M andatory) SET BTSDPMUBP(M andatory) SET BTSDTMUBP(M andatory) SET SET BTSSHARING(M andatory) ADD BTSSFPMODE( Mandatory) SET BTSFORBIDTS( Mandatory) SET BTSIDLETS(Ma ndatory) SET BTSOMLTS(Ma ndatory) TID BTSABISTS(Ma ndatory) ADD BTSTOPCONFI G(Mandatory) ADD BTSIPRT(Manda tory) SET BTSETHPORT( Mandatory) SET BTSRINGATTR( Mandatory) SET BTSTRCMPR(M andatory) SET ADD SEMILINK(Mand atory) SET MSTOCELL(Ma ndatory) TST SNDRSI(Mandat ory) TST UPDMSRAC(Ma ndatory)
MRFD210301
Configuration Management
Enumeration Type
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
IDTYPE
Index Type
BSC6900
Type of an index
MRFD211402
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
IDTYPE
Index Type
BSC6900
Subscribers can specify the cell according to the index or the name.
MRFD210301
Configuration Management
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
Not involved
None
Equipme nt
IDTYPE
Index Type
BSC6900
Index type of the BTS. BYNAME: query by BTS name; BYID: query by BTS GBFDindex. 111202
O&M of BTS
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
IDTYPE
Index Type
BSC6900
Index type. BYNAME: query by name; BYID: query by GBFDindex. 111202 The index of the Semilink. GBFD114701
IDX
Semilink Index
BSC6900
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
0~255, step:1
None None
None
BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt Equipme nt
IDXTYPE
Index Type
BSC6900
MRFD210301
Configuration Management
Enumeration Type
BYTLLI, BYIMSI
None None
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Equipme nt
IDXTYPE
Index Type
BSC6900
Index type, supporting the index SET based on the PSCELLTODSP( cell and BSC GBFDMandatory) mode. 111203 Whether the handshake mechanism is enabled at the Cb interface. Currently, the BSC and the CBC communicatio ns through the TCP/IP protocol. Thus, the BSC may not detect communicatio n link disconnection in some cases. The handshake mechanism is used for checking whether a ADD communicatio GCBSADDR(Opt n link is ional) normal. Number of ADD the outgoing BTSIPRT(Manda interface of a tory) link
O&M of BSC
Enumeration Type
None None
None
BSC
None
Not involved
Not involved
Not involved
None
Radio
IFCBSHAKE HAND
If CB Shake Hand
BSC6900
GBFD113601
YES(Yes), NO(No)
YES, NO
None YES
YES
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
IFNO
GBFD111202
O&M of BTS
0~3071
None None
None
IP route
None
Not involved
Not involved
None
Radio
6/9/2013
Page143of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether to set the middle frequency offset to SET positive BTSRXUBP(Opti offset or onal) minus offset
GBFD111202
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
IFOFFSETL OW
Indication Offset
BSC6900
Indication offset in the middle SET frequency BTSRXUBP(Opti offset GBFDonal) configuration 111202 Whether to report the progress. "NO" indicates that the progress STR is not BTSLOG(Option reported. al) "YES" ULD indicates that BTSLOG(Option the progress GBFDal) is reported. 111202 Number of invalid measurement reports allowed when the BSC filters the measurement reports. When the number of received measurement reports is no larger than this parameter, the BSC does not perform filtering or SET make quick GCELLHOFAST( handover GBFDOptional) judgment. 510102 CHK INNSPCH(Mand atory) STR CALLRESLOP( Mandatory)
O&M of BTS
0~125
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
IFREPPRO
BSC6900
O&M of BTS
Enumeration Type
NO, YES
None YES
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
IGNOREMR NUM
BSC6900
0~32
None None
1 Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
Radio
IMEI
IMEI
BSC6900
Value of an IMEI Timer for the BSC waiting for a CC message after sending a CR message. If the timer expires, the seized SDCCH is released. The channel activation and immediate assignment command are sent at the same time to accelerate the signaling processing rate, thus improving the response speed of the This parameter specifies whether to support the takeover of the packet immediate assignment by the BTS. It is relative to the uplink immediate assignment. To improve the access rate of the MS, the BSS allocates the uplink TBF resources to the BTS in advance. The BTS sends the immediate assignment message to the MS through the resources allocated by the BSC. When
GBFD111203
O&M of BSC
String Type
None
1~15 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Radio
BSC6900
GBFD111804
1000~30000
ms
None
5000 Cell
None
Not involved
Not involved
None
The parameter modification If this timer is set to a greater value, has no impact on the channel resources may be wasted, thus equipment. causing congestion.
Equipme nt
BSC6900
None
None
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD119202
Enumeration Type
NO, YES
None None
NO
Cell
None
Cell
Not involved
None
Radio
IMMASSEN
BSC6900
Whether to allow immediate assignment for TCHs. If this parameter is set to YES, when processing a channel request message, the BSC can assign a TCH immediately in the case of no available SDCCH. If this parameter is set to NO, the BSC can assign only an SDCCH when processing a SET channel GCELLBASICPA access RA(Optional) request. Maximum time delay in resending an immediate assignment message. Within the period specified by this parameter, an immediate assignment message can be dispatched and retransmitted . Otherwise, the message is not SET dispatched or GCELLCCTMR( retransmitted Optional) .
GBFD110502
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
GBFD110502
0~254
ms
None
4 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, the call-completion rate of MS increases but the BSC load may also increase. The parameter modification If this parameter is set to a smaller value, has no impact on the the increase of the call completion rate is Versions earlier than equipment. not obvious. BSC6900 V900R011
Radio
IMMASSMA XSENDNUM
Maximum number of retransmissio ns of an immediate assignment message. When the value of this parameter is reached, the immediate assignment message is not retransmitted even if the value of "Max Delay of Imm_Ass Retransmit" is not GBFDexceeded. 110502 Whether the BSC sends immediate assignment retransmissio n parameters GBFDto the BTS 110502
1~5
None None
2 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, the call-completion rate of MS increases but the BSC load may also increase. The parameter modification If this parameter is set to a smaller value, has no impact on the the increase of the call completion rate is Versions earlier than equipment. not obvious. BSC6900 V900R011
Radio
BSC6900
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
The parameter modification If this parameter is set to YES, the call has no impact on the completion rate of the MS increases but equipment. the BSC load also increases.
Radio
6/9/2013
Page144of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether to assign channels according to the access_dela y value in channel request messages during immediate channel assignment.
GBFD113201
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
Radio
BSC6900
When the access_dela y value in the channel request message is smaller than this parameter, the overlay channels are assigned preferentially; otherwise, the underlay channels are assigned GBFDpreferentially. 113201 Whether to adjust the offset time immediately after the BTS GBFDis reset. 118201
0~255
bit
None
None
Cell
Not involved
Not involved
None
Radio
IMMFNAD
BSC6900
SoftSynchronized Network
Enumeration Type
NO(NO), YES(YES)
NO, YES
None NO
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
BSC6900
Timer carried by the Wait Indication information element when the BSC sends an immediate assignment reject message to an MS. After the MS receives the immediate assignment reject message, the MS reattempts to access the SET network after GCELLTMR(Opt the timer GBFDional) expires. 110502 CHK INNSPCH(Mand atory) STR CALLRESLOP( Mandatory) SET MSTOCELL(Ma ndatory) TST SNDRSI(Mandat ory) TST UPDMSRAC(Ma ndatory)
0~255
None
10 Cell
None
Not involved
Not involved
None
The parameter modification If this parameter is set to a smaller value, has no impact on the the channel load may increase and the Versions earlier than equipment. access success rate may decrease. BSC6900 V900R011
Radio
IMSI
IMSI
BSC6900
Value of an IMSI
GBFD111203
O&M of BSC
String Type
None
1~15 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Radio
IMSI
IMSI
BSC6900
INBSCHOTI MER
T3121
BSC6900
International mobile subscriber identity of the MS. IMSI containing the number 0 to 9. Timer for the BSC waiting for a handover complete message after sending a handover request acknowledg ment message in 2G/3G handover or inter-BSC handover. If the timer SET expires, a GCELLTMR(Opt Clear REQ ional) message is Threshold for fine tuning the BTS clock. If the offset of the BTS clock is smaller than the threshold, no fine tuning is performed. Fine tuning period in the BSC.
GBFD111203
O&M of BSC
String Type
None
1~15 characters
None None
None
This parameter is valid Subsys only when "IDXTYPE" is tem set to BYIMSI.
Not involved
Not involved
Not involved
None
Radio
GBFD110601 GBFD510501
500~60000
ms
None
10000 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, channel resources may be wasted, thus The parameter modification causing congestion. If this parameter is has no impact on the set to a smaller value, the handover Versions earlier than equipment. success rate may decrease. BSC6900 V900R011
Radio
INCHLOD
BSC6900
INCHPRD
GBFD118201 GBFD118201
0~8
bit
4 None
Not involved
Not involved
None.
1~30
3 None
Not involved
Not involved
None.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
BSC6900
Included angle formed by the major lobe azimuths of the antennas in two cells under one BTS. A major lobe azimuth is measured from the due north to the direction of the cell SET antenna in a GCELLLCS(Opti clockwise GBFDonal) rotation. 115402
0~360
degr ee None
None
Cell
None
Not involved
Not involved
None
Equipme nt
INCN
INDEN3
Independent E1 Port 3
BSC6900
INFHHOLAS T
BSC6900
BSC6900
BSC6900
Number of the in-port cabinet on a BTS Whether to separate E1 from other optical fibers for the use of other devices. If this parameter is set to YES, other BTSs can connect to the BSC through the independent SET E1 port 3 of BTSDOMUBP(O the ptional) BTS3006C. The triggering of intra-cell F-H handovers must meet the P/N criteria, that is, when the condition for intra-cell F-H handovers is met for P seconds during N seconds, an intra-cell F-H handover is triggered. This parameter corresponds SET to the P in GCELLHOBASI the P/N C(Optional) criteria. The triggering of intra-cell F-H handovers must meet the P/N criteria, that is, when the condition for intra-cell F-H handovers is met for P seconds during N seconds, an intra-cell F-H handover is triggered. This parameter corresponds SET to the N in GCELLHOBASI the P/N C(Optional) criteria. Information ADD exchange GNRNC(Mandat content to be ory) supported ADD BTSCONNECT( Optional)
GBFD111202
O&M of BTS
0~62
None None
None
BTS
None
BTS
This paramete r can be modified only when the BTS is The BTS should be reset to deactivat validate the parameter ed. modification. None
Radio
GBFD111202
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
GBFD115504
1~16
None
4 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "INTRACELLFHHOEN" is set to YES. The following condition must be met: "INFHHOSTAT" Read & >= "INFHHOLAST". Write
Not involved
Not involved
None
Radio
GBFD115504
1~16
None
5 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "INTRACELLFHHOEN" is set to YES. The following condition must be met: "INFHHOSTAT" Read & >= "INFHHOLAST". Write Set when Allow Info Exchange at Iur-g is set to Yes
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
MRFD211402
None
0 None
BSC
Not involved
Not involved
None
BSC6900 V900R011
Radio
6/9/2013
Page145of316
150682621.xls.ms_office
Security Level:
INFRA_RED _MASK
BSC6900
ADD EMU(Optional)
Infrared MRFDalarm switch 210304 For an AMR call, if the currently occupied channel is a full rate channel and the Radio Quality Indication (RQI) is always higher than the threshold set by this parameter, an intra-cell FH handover is GBFDtriggered. 115504 For an AMR call, if the currently occupied channel is a half rate channel and the Radio Quality Indication (RQI) is always lower than the threshold set by this parameter, an intra-cell H-F handover GBFDis triggered. 115504
Faulty Management
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None OPEN
None
Board
None
Not involved
Not involved
None
Equipme nt
INHOF2HTH
0~39
None None
25 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "INTRACELLFHHOEN" is Read & set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, the traffic volume during busy time may The parameter modification be decreased. has no impact on the If this parameter is set to a smaller value, Versions earlier than equipment. the voice quality may be decreased. BSC6900 V900R011
Radio
INHOH2FTH
0~39
None None
12 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "INTRACELLFHHOEN" is Read & set to YES. Write
Not involved
Not involved
Power overload threshold for allowing incoming handover to the TRX under the prerequisite that the power amplifier of the TRX SET provides the GTRXDEV(Optio maximum GBFDnal) output power 111005 Initial coding mode used for full rate AMR calls. The four values 0, 1, 2, and 3 of this parameter respectively represent the lowest, low, high, and SET highest GCELLCCAMR( coding rates GBFDOptional) in the ACS. 115501 Initial coding mode used for half rate AMR calls. The four values 0, 1, 2, and 3 of this parameter respectively represent the lowest, low, high, and SET highest GCELLCCAMR( coding rates Optional) in the ACS. Initial coding mode used for broadband AMR calls. The three values 0, 1 and 2 of this parameter respectively represent the lowest, low SET and highest GCELLCCAMR( coding rates Optional) in the ACS.
0~50
None
8 TRX
None
Not involved
Not involved
None This paramete r must be equal to or less than "OUTHO PWROV ERLOAD THRESH OLD" to protect the other timeslots/ cells from overload and underpo wer.
If this parameter is set to a greater value, the traffic volume during busy time may The parameter modification be decreased. has no impact on the If this parameter is set to a smaller value, Versions earlier than equipment. the voice quality may be decreased. BSC6900 V900R011
Radio
The parameter modification If the value of this parameter is set too has no impact on the high, the power load of other timeslots or equipment. cells is burdened.
Equipme nt
INITCDMDF
BSC6900
AMR FR
0~3
None None
1 Cell
None
Not involved
Not involved
None
The setting of this parameter affects the MOS. When the C/I ratio is satisfactory, The parameter modification the coding scheme of higher rate is has no impact on the recommended; otherwise, the coding equipment. scheme of lower rate is recommended.
Radio
INITCDMDH
BSC6900
GBFD115502
AMR HR
0~3
None None
None
Cell
None
Not involved
Not involved
None
The setting of this parameter affects the MOS. When the C/I ratio is satisfactory, The parameter modification the coding scheme of higher rate is has no impact on the recommended; otherwise, the coding equipment. scheme of lower rate is recommended.
Radio
BSC6900
GBFD115507
WB AMR
Interval Type 0~2 TS0, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
0~2
None None
2 Cell
None
Not involved
Not involved
None
The setting of this parameter affects the MOS. When the C/I ratio is satisfactory, The parameter modification the coding scheme of higher rate is has no impact on the recommended; otherwise, the coding equipment. scheme of lower rate is recommended.
BSC6900 V900R011
Radio
INMASK
In BSC Mask
BSC6900
ADD Specify the SEMILINK(Optio timeslot GBFDnal) mask in BSC. 114701 Whether to assign channel requests in the overlay subcell to the underlay subcell according to "UL Subcell Lower Load Threshold". If the load of the underlay subcell is lower than "UL Subcell Lower Load Threshold", incoming calls in the overlay subcell will be preferentially SET assigned to GCELLHOEDBP the underlay GBFDARA(Optional) subcell. 114402 Whether to allow SET underlay-toGCELLHOEDBP overlay edge ARA(Optional) handovers ADD Index of the EXTNCELL(Man cell in the datory) BSC. ADD Name of the EXTNCELL(Man cell in the datory) BSC. Whether to allow SET underlay-toGCELLHOEDBP overlay load ARA(Optional) handovers Overlay-tounderlay load handovers are performed by levels. This parameter SET indicates the GCELLHOEDBP duration of ARA(Optional) each level. Level step during overlay-tounderlay SET hierarchical GCELLHOEDBP load ARA(Optional) handovers In an enhanced dual-band network, if the load of the overlay subcell is higher than this parameter, the system cannot initiate an SET underlay-toGCELLHOEDBP overlay ARA(Optional) handover. ADD SEMILINK(Mand In BSC Port atory) No..
SemiPermanent Connection
TS0, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
BSC
None
Not involved
Not involved
None
Transpor t
BSC6900
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell. This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell.
Not involved
Not involved
None
Radio
INNCELLED GEHOEN
Inner Cell EDGE HO Enable BSC inner Cell index BSC Inner Cell Name
BSC6900
Enhanced Dual- Enumeration Band Network Type Configuration Management Configuration Management
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
Not involved
Not involved
None
INNCELLID INNCELLNA ME
BSC6900
0~2047
None None
None
BSC69 00 None BSC69 00 None This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell.
Not involved
Not involved
None.
BSC6900
String Type
None
1~64 characters
None None
None
Not involved
Not involved
None.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
BSC6900
GBFD114402
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
Not involved
Not involved
None
Radio
BSC6900
GBFD114402
1~255
None
10 Cell
Not involved
Not involved
None
Radio
GBFD114402
0~63
dB
None
5 Cell
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the underlaid The parameter modification subcell in a short time; if this parameter is has no impact on the set to a smaller value, congestion in the Versions earlier than equipment. overlaid subcell is difficult to be relieved. BSC6900 V900R011
Radio
BSC6900
GBFD114402 GBFD114701
INPN
BSC6900
Enhanced DualBand Network Interval Type 0~100 SemiPermanent Connection Interval Type 0~335
0~100
per cent
None
90 Cell
This parameter is valid only when "OUTLOADHOENABLE" Read & is set to YES. Write Read & Write
Not involved
Not involved
None
0~335
None None
None
BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Transpor t
6/9/2013
Page146of316
150682621.xls.ms_office
Security Level:
INPN
BSC6900
INPORTNO
BSC6900
GBFD111202 GBFD111203
O&M of BTS
0~23
None None
None
BTS
None
BTS
O&M of BSC
0~15
None None
None
BTS
None
BTS
This paramete r can be modified only when the BTS is The BTS should be reset to deactivat validate the parameter ed. modification. None The BTS should be reset to validate the parameter None modification. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Transpor t
INPUTMD
BSC6900
Mode of inputting the SET latitude and GCELLLCS(Opti longitude of a GBFDonal) cell location 115402 Whether to allow interBSC SDCCH GBFDhandovers 110608 In BSC Slot No.. GBFD114701
Enumeration Type
None None
None
Cell
None This parameter is valid only when "SIGCHANHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
Equipme nt
INSN
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
Not involved
Not involved
None
0~27
None None
None
BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Transpor t
INSN
BSC6900
INSRN
BSC6900
Number of the in-port GBFDslot on a BTS 111202 In BSC GBFDSubrack No.. 114701
0~23
None None
None
BTS
None
BTS
0~11
None None
None
BSC
None
Not involved
Not involved
This paramete r can be modified only when the BTS is The BTS should be reset to deactivat validate the parameter ed. modification. None The parameter modification has no impact on the None equipment. None This paramete r can be modified only when the BTS is The BTS should be reset to deactivat validate the parameter ed. modification. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Transpor t
INSRN
BSC6900
O&M of BTS
0~254
None None
None
BTS
None
BTS
Radio
INT
Broadcast Interval
BSC6900
INTELEVHO HYST
Time interval for sending a simple cell broadcast message Hysteresis value during the handovers between cells on different layers or of different priorities. This value is used to suppress ADD inter-layer G2GNCELL(Opti ping-pong onal) handovers. ADD GSMSCB(Mand atory)
GBFD113602
2~3600
None
60 Cell
None
Not involved
Not involved
None
Radio
GBFD110601 GBFD510501
0~127
dB
None
67 Cell
Inter-layer HO threshold of the serving cell = "Inter-layer HO threshold" - "Inter-layer HO Hysteresis". Inter-layer HO threshold of the neighboring cell = "Inter-layer HO threshold" + "Adjacent Cell Inter-layer HO Hysteresis" - 64. The value of "Inter-layer HO threshold" can be set through "SET Read & GCELLHOBASIC". Write
Not involved
Not involved
None
Radio
INTERCELL HYST
Inter-cell HO Hysteresis
BSC6900
Type of an interference band statistics algorithm used when the frequency SET scanning GCELLSOFT(O function is GBFDptional) enabled 112401 Reduces pingpong handovers between cells on a same layer. This parameter is invalid when GBFDADD cells are on 110601 G2GNCELL(Opti different GBFDonal) layers. 510501 Specifies an interval between two SET consecutive GCELLHOFITPE interference N(Optional) handovers
Enumeration Type
None None
INTBANII
Cell
None
Not involved
Not involved
None
Radio
0~63
dB
None
In densely populated urban areas, the recommended value is 4; in the suburbs, the recommended value is 8.
Cell
None This parameter is valid only when "HOCTRLSWITCH" in "SET GCELLHOBASIC" is set to HOALGORITHM2.
Not involved
Not involved
None
Radio
BSC6900
GBFD110601 GBFD510501
0~255
None
15 Cell
Not involved
Not involved
None
If this parameter is set to a greater value, call drops may occur. If this parameter is set to a smaller value, The parameter modification handover may be performed frequently has no impact on the and the signaling load in the cell is Versions earlier than equipment. increased. BSC6900 V900R011
Radio
INTERFERE LASTTIME
BSC6900
The triggering of interference handovers must meet the P/N criteria, that is, when P out of N measurement reports meet the condition for interference handovers, a concentric circle handover is triggered. This parameter corresponds to the P in the P/N GBFDcriteria. 510501 The triggering of interference handovers must meet the P/N criteria, that is, when P out of N measurement reports meet the condition for interference handovers, a concentric circle handover is triggered. This parameter corresponds to the N in the P/N GBFDcriteria. 510501 Whether to allow the interference handover algorithm. Interference handovers are triggered when the receive level is higher than the receive threshold while the transmit quality is lower than the interference handover quality threshold, that is, when the MSs are subject to all GBFDkinds of radio 110601 interferences GBFD. 510501 Whether to consider interference priorities during channel assignment
HUAWEI II Handover
1~16, step:0.5
None
2 Cell
This parameter is valid only when "INTERFHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "INTERFERESTATTIME" >= "INTERFERELASTTIME" Read & . Write
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time. Thus, the voice quality is decreased and call drops may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
INTERFERE STATTIME
HUAWEI II Handover
1~16, step:0.5
None
3 Cell
This parameter is valid only when "INTERFHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "INTERFERESTATTIME" >= "INTERFERELASTTIME" Read & . Write
Not involved
Not involved
None
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, The parameter modification the handover cannot be performed in has no impact on the time, thus the voice quality is decreased Versions earlier than equipment. or call drops may occur. BSC6900 V900R011
Radio
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD111005
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page147of316
150682621.xls.ms_office
Security Level:
INTERFTHR ES0
BSC6900
INTERFTHR ES1
BSC6900
INTERFTHR ES2
BSC6900
INTERFTHR ES3
BSC6900
INTERFTHR ES4
BSC6900
INTERFTHR ES5
BSC6900
Threshold used for interference measurement . The BSS measures the uplink quality of the radio channels occupied by MSs, and calculates and reports the interference on each of the idle channels. This helps the BSC to assign channels. According to the strength of interference signals, the interference signals are classified into five interference levels. The Threshold used for interference measurement . The BSS measures the uplink quality of the radio channels occupied by MSs, and calculates and reports the interference on each of the idle channels. This helps the BSC to assign channels. According to the strength of interference signals, the interference signals are classified into five interference levels. The Threshold used for interference measurement . The BSS measures the uplink quality of the radio channels occupied by MSs, and calculates and reports the interference on each of the idle channels. This helps the BSC to assign channels. According to the strength of interference signals, the interference signals are classified into five interference levels. The Threshold used for interference measurement . The BSS measures the uplink quality of the radio channels occupied by MSs, and calculates and reports the interference on each of the idle channels. This helps the BSC to assign channels. According to the strength of interference signals, the interference signals are classified into five interference levels. The Threshold used for interference measurement . The BSS measures the uplink quality of the radio channels occupied by MSs, and calculates and reports the interference on each of the idle channels. This helps the BSC to assign channels. According to the strength of interference signals, the interference signals are classified into five interference levels. The Threshold used for interference measurement . The BSS measures the uplink quality of the radio channels occupied by MSs, and calculates and reports the interference on each of the idle channels. This helps the BSC to assign channels. According to the strength of interference signals, the interference signals are classified into five interference levels. The
GBFD111005
48~115
None None
None
Cell
The setting of this parameter must meet the following condition: "INTERFTHRES0" > Read & "INTERFTHRES1". Write
Not involved
Not involved
None
Radio
GBFD111005
48~115
None None
None
Cell
The setting of this parameter must meet the following condition: "INTERFTHRES1" > Read & "INTERFTHRES2". Write
Not involved
Not involved
None
Radio
GBFD111005
48~115
None None
None
Cell
The setting of this parameter must meet the following condition: "INTERFTHRES2" > Read & "INTERFTHRES3". Write
Not involved
Not involved
None
Radio
GBFD111005
48~115
None None
None
Cell
The setting of this parameter must meet the following condition: "INTERFTHRES3" > Read & "INTERFTHRES4". Write
Not involved
Not involved
None
Radio
GBFD111005
48~115
None None
None
Cell
The setting of this parameter must meet the following condition: "INTERFTHRES4" > Read & "INTERFTHRES5". Write
Not involved
Not involved
None
Radio
GBFD111005
48~115
None None
None
Cell
The setting of this parameter must meet the following condition: "INTERFTHRES4" > Read & "INTERFTHRES5". Write
Not involved
Not involved
None
Radio
6/9/2013
Page148of316
150682621.xls.ms_office
Security Level:
INTERIORS YNCTMR
BSC6900
Value of the timer for synchronizati on between BSCs. If a BSC fails to synchronize with the control BSC before the timer expires, the BSC starts to synchronize the BTSs under its GBFDcontrol. 118201
SoftSynchronized Network
0~60
3 None
BSC69 00 None
Not involved
Not involved
INTERPERI OD
BSC6900
Period during which interference levels are averaged. The interference levels on idle channels are averaged before the BTS sends a radio resource indication message to the BSC. The averaging result is used for classifying the interference levels on idle channels into five interference bands. For details, see SET GSM Rec. GCELLOTHEXT( 08.08, 08.58, GBFDOptional) and 12.21. 111005 Whether to allow cell GBFDreselection 114301 from 2G cells GBFDto 3G cells 114302
ms
None
None
Cell
None
Not involved
Not involved
The parameter modification has no impact on the None. equipment. None 1. Interfere nce band 0 is not counted in the traffic statistics. 2. In the following BTSs, the value range of this paramete r is 115 to 85: BTS2X of all the versions, BTS3X 03.1130 of the earlier versions, 3001C07 .0301 of the earlier versions, and 3002C02 The parameter modification .0820 of has no impact on the the equipment. None
BSC6900 V900R011
Radio
Radio
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Threshold for setting the flag of accepting SET inter-RAT CS GCELLHOINTE service RRATLDB(Optio handover of MRFDnal) a 2G cell 211402 Whether to allow GBFDhandovers 114301 from 3G cells GBFDto 2G cells 114302 Width of load band [EcNo] during the inter-RAT hierarchical load-based MRFDhandover 211402
{1~100}
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
{1~49}
dB
None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
Initial EcNo value of the SET inter-RAT GCELLHOINTE load-based RRATLDB(Optio handover nal) band Step of changing the EcNo value during the SET inter-RAT GCELLHOINTE hierarchical RRATLDB(Optio load-based nal) handover
MRFD211402
{0~49}
dB
None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
MRFD211402
{1~49}
dB
None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
Width of load band [RSCP] during the SET inter-RAT GCELLHOINTE hierarchical RRATLDB(Optio load-based MRFDnal) handover 211402 Initial RSCP value of the SET inter-RAT GCELLHOINTE load-based RRATLDB(Optio handover nal) band Step of changing the RSCP value during the SET inter-RAT GCELLHOINTE hierarchical RRATLDB(Optio load-based nal) handover Whether to allow SET handovers GCELLHOBASI from 2G cells C(Optional) to 3G cells When Servicebased is selected, the destination cell is filtered according to the destination cell load. When Loadbased is selected, the destination cell is filtered according to the destination cell load and the load balance between a 2G cell and a 3G cell. When Dynamic Service/Loadbased is selected, the access cell is SET selected GCELLHOINTE through the RRATLDB(Optio Servicenal) based or Time span before the command is executed. The logs generated within the time span are to be exported.
{1~91}
dB
None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
MRFD211402
{0~91}
dB
None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
{1~91}
dB
None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
MRFD211402
Enumeration Type
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
INTERVAL
Relative Time
BSC6900
EXP LOG(Optional)
GBFD111203 MRFD210305
1~240
72
72 RNC
None
Not involved
Not involved The loopback keeps interrupting the services until the loopback is cancelled.
None
Equipme nt
INTERVAL
BSC6900
Ethernet OAM
1~10
BSC69 1 00 None
Ethernet port
None
Transpor t
BSC6900
Frequency index of the interference measurement in type 3 of SET an extension GCELLEXTMSR measurement PARA(Optional) report
GBFD110801 GBFD110802
0~31
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Lower threshold of the overlay level during underlay-tooverlay handovers. When the receive level of an MS is higher than this threshold, the MS can be SET switched to GCELLHOEDBP the overlay GBFDARA(Optional) subcell. 114402
0~63
dB
None
30 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell.
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the underlaid subcell; The parameter modification If this parameter is set to a smaller value, has no impact on the handover success rate may be Versions earlier than equipment. decreased. BSC6900 V900R011
Radio
6/9/2013
Page149of316
150682621.xls.ms_office
Security Level:
BSC6900
Timer started after the BSC delivers a handover command in an intra-BSC inter-cell handover. If the BSC receives a handover complete message before this timer expires, the timer stops. If this timer expires, the BSC GBFDSET considers the 110601 GCELLTMR(Opt handover as GBFDional) failed. 510501 Whether to allow AMR handovers. This parameter has no impact on dynamic nonAMR F-H GBFDhandovers. 115504
500~60000
ms
None
None
Cell
None
Not involved
Not involved
None
If this timer is set to a greater value, channel resources may be wasted, thus The parameter modification causing congestion. has no impact on the If this timer is set to a smaller value, the equipment. handover success rate may decrease.
Radio
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "INTRACELLHOEN" Read & is set to YES. Write
Not involved
Not involved
None
Radio
INTRACELL HOEN
Intracell HO Allowed
BSC6900
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
In the hot-spot areas, densely populated urban areas, urban areas, suburbs, and rural areas, the recommended value is YES; in the highspeed circumstances, the recommended value is NO. Cell
None
Not involved
Not involved
None
Radio
INTRACELL HOTIMER
T3103C
BSC6900
Timer started after the BSC delivers a handover command in an intra-BSC intra-cell handover. If the BSC receives a handover complete message before this timer expires, the timer stops. If this timer expires, the BSC GBFDSET considers the 110601 GCELLTMR(Opt handover as GBFDional) failed. 510501 Whether it is an RNC under the same MBIC in GU mode
500~60000
ms
None
None
Cell
None
Not involved
Not involved
None
If this timer is set to a greater value, channel resources may be wasted, thus The parameter modification causing congestion. has no impact on the If this timer is set to a smaller value, the equipment. handover success rate may decrease.
Radio
INTRAMBSC Co-MBSC
BSC6900
MRFD211402
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
BSC6900
Minimum Ec/No value of a 3G cell during the SET load-based GCELLHOINTE GSM-toRRATLDB(Optio UMTS MRFDnal) handover 211402 When the load of a cell is greater than or equal to Load HO Threshold, all the calls in the serving cell send handover requests simultaneousl y. Thus, the load on the CPU increases rapidly. In some cases, the cell is congested and call drops might occur. Therefore, the BSC adopts the hierarchical load handover algorithm to SET control the GCELLHOINTE number of RRATLDB(Optio calls to be MRFDnal) handed over 211402 Minimum RSCP value of a 3G cell during the SET load-based GCELLHOINTE GSM-toRRATLDB(Optio UMTS nal) handover ADD SEMILINK(Mand In BSC Start atory) Timeslot No.. ADD DXXTSEXGREL Number of a ATION(Mandator DXX Iny) timeslot
{0~49}
dB
None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
{1~255}
None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
Inter-RAT Load IntRATLoadH HO RSCP ORSCPThr Threshold In BSC Start Timeslot No. DXX In Time Slot No.
BSC6900
INTSN
BSC6900
{0~91}
dB
None
None
BSC
None
Not involved
Not involved
None
0~255
None None
None
BSC
None
Not involved
Not involved
None
INTSNO
BSC6900
O&M of BSC
0~31
None None
None
BTS
None
BTS
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The BTS should be reset to validate the parameter modification. None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
INTV
Time Interval[min]
BSC6900
Interval for executing the scheduled subtask. If the time mode is set to "DAILY_C", "WEEKLY_C ", or "MONTHLY_ C", you should set this GBFDparameter. 111203
O&M of BSC
1~1440
minut e
30 None
RNC
None
Not involved
Not involved
None
Equipme nt
INTV
BSC6900
Automatic switchover interval. This parameter needs to be set only when "OMU automatic switchover switch" is set to "ON". The minimum automatic switchover interval is 30 days and the maximum automatic SET switchover ASWPARA(Man interval is GBFDdatory) 1024 days. 111203 Whether a measurement report can contain the information SET about a cell GCELLCCUTRA with an GBFDNSYS(Optional) invalid BSIC 117501 ADD XPUVLAN(Mand MRFDatory) IP address 210301 EXP LOG(Optional) ADD SNTPSRVINFO( Mandatory) DLD LICENSE(Manda tory) ULD LICENSE(Manda IP address of GBFDtory) the server 111203
O&M of BSC
30~1024
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
IP
IP Address
BSC6900
None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
IP
IP Address
BSC6900
O&M of BSC
IP Address Type
None
None
RNC
None
Not involved
Not involved
None
Equipme nt
IP
Local IP Address
BSC6900
Gb over IP
IP Address Type
None
None
NSE
None
Not involved
Not involved
Not involved
None
Equipme nt
IP
Remote IP Address
BSC6900
IP address of the remote GBFDNSVL. IP address of 118603 a BTS port. It cannot be the same as any IP address in the BSC.
Gb over IP
IP Address Type
None
None
NSE
None
NSE
Services are interrupted unless the NSVL configuration is the same as the SGSN configuration at the BSC. None
Equipme nt
IP
Physical IP
BSC6900
GBFD118601
Abis over IP
IP Address Type
None
None
BTS
None
Not involved
Not involved
None
Radio
6/9/2013
Page150of316
150682621.xls.ms_office
Security Level:
IP
FTPServer IP
BSC6900
DLD BTSSW(Mandat ory) DLD RETANTCFG(M andatory) ULD BTSDEVFILE(M andatory) DLD BTSPATCH(Man datory) ULD IP address of BTSLOG(Manda the FTP GBFDtory) server 111202
O&M of BTS
IP Address Type
None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
IPADDR
Local IP address
BSC6900
The local IP address must be the configured IP address (including the IP address and port address of the interface board). None
None
IP Address Type
None
None
The "IPADDR" in "ADD IPPATH" can not be at one network segment with the peer IP address of SCTPLNK or IPPATH whose local IP address is device IP address of FG2/GOU in this subrack;"IPADDR" and "PEERIPADDR" in "ADD IPPATH" must be at one network segment;("IPADDR","PE ERIPADDR","PEERMAS K" in "ADD IPPATH") conflicts with other IPPATH whose type is Read & IP path IUPS. Write
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
IPADDR
IP address
BSC6900
ADD DEVIP(Mandator IP address of y) the board None Local IP ADD address of ETHIP(Mandator the Ethernet y) port. Source IP address of the packet ADD for ICMPGUARD(M preventing andatory) the ICMP
None
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
IPADDR
Local IP address
BSC6900
None
None
IP Address Type
None
None
Not involved
Not involved
Not involved
None
Transpor t
IPADDR
BSC6900
None
None
IP Address Type
None
None
Not involved
Not involved
Not involved
None
Transpor t
IPADDR
BSC6900
IP address of the next hop None Local IP address of the aggregation group.
None
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
IPADDR
Local IP address
BSC6900
IPADDR
IP Address
BSC6900
IPADDR1
IP Address1
BSC6900
Link aggregation
None
0.0.0.0~255.255.255 .255 None None 0.0.0.0~255.255.255 .255 None None 0.0.0.0~255.255.255 .255 None None
None
Not involved
Not involved
Not involved
IPADDR1
BSC6900
IPADDR2
IP Address2
BSC6900
IPADDR2
BSC6900
IPADDR3
IP Address3
BSC6900
IPADDR4
IP Address4
BSC6900
IP address of the router. The first IP address of the SGSN. It must be the valid address of the A, B, or C type and cannot be the broadcast SET address or BTSIPCLKPARA network (Mandatory) address. The second ADD IP address of SGSN(Optional) the SGSN. It must be the valid address of the A, B, or C type and cannot be the broadcast SET address or BTSIPCLKPARA network (Mandatory) address. The third IP ADD address of SGSN(Optional) the SGSN. The fourth IP ADD address of SGSN(Optional) the SGSN.
Gb over IP
None
None
BSC
None
Not involved
Not involved
Gb over IP
None
None
BSC
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
GBFD118606 GBFD118603
Clock over IP
None
None
BTS
None
Not involved
Not involved
None
Gb over IP
None
None
BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
Clock over IP
None
0.0.0.0~255.255.255 .255 None None 0.0.0.0~255.255.255 .255 None None 0.0.0.0~255.255.255 .255 None None
None
BTS
None
Not involved
Not involved
None
Gb over IP
None
None
BSC
None
Not involved
Not involved
None
Gb over IP
None
None
BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
IPHC
Head compress
BSC6900
Enumeration Type
No_HC(No_HC), UDP/IP_HC(UDP /IP_HC), RTP/UDP/IP_HC (RTP/UDP/IP_H No_HC, UDP/IP_HC, C) RTP/UDP/IP_HC None UDP/IP_HC
UDP/IP_HC
PPP link
None
BSC6900
Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None No_HC: disable the header compres sion function; RTP/UD P/IP_HC: enable the RTP/UD The parameter modification P/IP/PPP has no impact on the function equipment. None The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
Transpor t
IPHC
Head compress
BSC6900
Compression function of GBFDADD the IP header 118611 MPGRP(Optiona of the PPP GBFDl) link 118622
Enumeration Type
No_HC(No_HC), UDP/IP_HC(UDP /IP_HC), RTP/UDP/IP_HC (RTP/UDP/IP_H No_HC, UDP/IP_HC, C) RTP/UDP/IP_HC None UDP/IP_HC
UDP/IP_HC
MP group
None
Not involved
Not involved
Transpor t
IPINDEX
IP address index
BSC6900
ADD IP address ETHIP(Mandator index of the y) Ethernet port None IP address index of the aggregation group
None
0~5
None None
None
Not involved
Not involved
Not involved
None
Transpor t
IPINDEX
IP address index
BSC6900
IPMUXINDE X
IP MUX Index
BSC6900
Link aggregation
0~5
None None
None
Not involved
Not involved
Not involved
None
Transpor t
0~12999
None None
None
None
None
Not involved
Not involved
ADD BTS(Optional)
GBFD118601
Abis over IP
Enumeration Type
IP_OVER_FE/GE
BTS
This parameter is valid only when "SERVICEMODE" in "MOD BTS" is set to IP.
BTS
None This paramete r depends on the type of the actual physical IP The BTS should be reset to transport validate the parameter cable of modification. None This paramete r must be set accordin g to the medium type of the actual IP transmiss ion cable The BTS should be reset to used by validate the parameter the BTS. modification. None
Transpor t
BSC6900 V900R011
Transpor t
Type of IP physical transmission ADD cable BTSAUTOPLAN( medium, E1 Optional) or FE/GE. Whether to enable the heater. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDHEUBP(Op in another tional) mode. Whether the ADD BSC is a AISSCFG(Mand reference atory) BSC. Whether the ADD cell is a chain G2GNCELL(Opti neighboring onal) cell
GBFD118601
Abis over IP
Enumeration Type
None None
None
BTS
None
BTS
BSC6900 V900R011
Transpor t
BSC6900
GBFD111202
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
NO
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
BSC6900
GBFD118201
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
GBFD510103
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Whether to support clock SET server BTSIPCLKPARA redundancy GBFD(Mandatory) configuration. 118606
Clock over IP
Enumeration Type
None None
None
BTS
If the redundancy configuration mode is not supported, only one clock server can be configured. Otherwise, two clock servers can be Read & configured. Write If the redundancy configuration mode is not supported, only one clock server can be configured. Otherwise, two clock servers can be Read & configured. Write
Not involved
Not involved
None
Radio
BSC6900
Whether to support clock SET server BTSIPCLKPARA redundancy GBFD(Mandatory) configuration. 118606 Whether to enable the BTS to support ring networking. IP BTS is not support this GBFDparameter. 117801 Is Configure Check GBFDThreadhold. 111202
Clock over IP
Enumeration Type
None None
None
BTS
Not involved
Not involved
None
Radio
Config Ring
BSC6900
Ring Topology
NO, YES
None NO
NO
BTS
None
BTS
None
O&M of BTS
YES, NO
None None
None
BTS
None
Not involved
Not involved
None
The BTS should be reset to validate the parameter modification. None The parameter modification has no impact on the equipment. None
Transpor t Equipme nt
BSC6900 V900R011
6/9/2013
Page151of316
150682621.xls.ms_office
Security Level:
BSC6900
A service support attribute of a cell, that is, whether an external GSM cell supports GBFDEDGE 114201
EGPRS
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Whether to indicate the first class ADD transport RSCGRP(Manda resource tory) group A service
None
None
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
support attribute of a cell, that is, whether an external GSM cell supports GBFDGPRS 114101
GPRS
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
None
Radio
ISMAINBCC H
IsMainBSC
Is Main BSC
BSC6900
Whether to enable the TRX to carry the main ADD BCCH in the GTRX(Optional) cell SET Whether the BSCBASIC(Man BSC is a datory) primary BSC
MRFD210301 GBFD113726
Configuration Management
NO, YES
None NO
NO
TRX
None
Cell
TC Pool
NO, YES
None None
None
BSC69 00 None
Not involved
Not involved
Each cell can be configure d with only one TRX that carries The cell should be reset to the main validate the parameter BCCH. modification. None The parameter modification has no impact on the None equipment. None
Radio Equipme nt
BSC6900 V900R011
ISMAINLOC GRP
Is Main Locgrp
BSC6900
Whether this location group is the main location group. If the value is Yes, this location group is the main location group. If the value is No, this location ADD group is the BTSLOCGRP(M slave location GBFDandatory) group. 510104 A service support attribute of a cell, that is, whether an external GSM cell supports GBFDNC2 116201 Configuration mode of the IP subnetwork. Static configuration: fixed local NSVL and remote NSVL parameters through manual configuration; Dynamic configuration: the NSVL parameter obtained through negotiation between the BSC and the SGSN after the local NSVL and SGSN service point are configured GBFDmanually. 118603
Multi-site Cell
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
ISNC2SUPP ORT
BSC6900
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
None
Radio
ISNCMODE
BSC6900
ADD NSE(Optional)
Gb over IP
Enumeration Type
STATIC, DYNAMIC
None None
None
NSE
None
Not involved
Not involved
Not involved
None
Transpor t
ISQOSPATH IS QOSPATH
BSC6900
GBFD118604 GBFD118610
NO(NO), YES(YES)
NO, YES
None None
None
IP Path None
Not involved
Not involved
The paramete r IPPATH must be configure The parameter modification d in has no impact on the advance. equipment. None
Transpor t
BSC6900
Whether to indicate it is the root node when the ADD transport ADJNODE(Mand type is ATM atory) or ATM_IP None Whether the Um interface software synchronizati ADD on between AISSCFG(Mand BSCs is atory) supported. Whether SET multiple BTSENVALM(M DEMUs are andatory) configured Whether to enable the BTS to support local switching If the BTS supports local switching, when the calling and called MSs are both within the BTS or BTS group, the voice signals are looped back to the MSs within the BTS or BTS group instead of being sent over the Abis interface to the BSC and MSC. In this way, the Abis resources between the SET convergence BTSLSW(Option BTS and the al) BSC are Whether to support the FRA (E1/T1 frame relay ADD interface BRD(Optional) board) Whether to SET support the BSCBASIC(Opti TC pool onal) function ADD Whether it is BRD(Mandatory) a TC board Whether the ADD subrack is a SUBRACK(Optio remote main nal) TC subrack
None
Enumeration Type
None None
None
When the value of "NODET" in "ADD ADJNODE" is set to IUB, IUR, or IUCS, and the value of "TRANST" in "ADD ADJNODE" is set Adjace to ATM or ATM_IP, this Read & nt node parameter is valid. Write
Not involved
Not involved
Not involved
None
Transpor t
GBFD118201
SoftSynchronized Network
Enumeration Type
NO, YES
None None
None
BSC69 00 None
Not involved
Not involved
None.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
YES, NO
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GBFD117702
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
BTS
This parameter can be set to YES only when "BssLsGenMode" in "SET BSSLS" is set to BTSPRIORITY, BSCPRIORITY, or BTSONLY.
Not involved
Not involved
None
Equipme nt
BSC6900
MRFD210301
Configuration Management
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
IsSupportTc Pool
GBFD113726 MRFD210301
NO, YES
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt Equipme nt
ISTCBRD
TC board
BSC6900
YES, NO
None None
None
None
None
Not involved
Not involved
None
BSC6900
MRFD210301
Configuration Management
Enumeration Type
NO(NO), YES(YES)
NO, YES
None NO
NO
None
None
Not involved
Not involved
None
Equipme nt
BSC6900
Whether to control the temperature difference between the air inlet and air outlet and that between the air outlet and ambient by the temperature control system. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDHEUBP(Op in another GBFDtional) mode. 111202 Whether to configure the transmission cabinet. The BTS uses this parameter to calculate the SET number of BTSPSUFP(Opti TRXs to be GBFDonal) shut down. 111202
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
NO
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
Enumeration Type
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page152of316
150682621.xls.ms_office
Security Level:
ITEM
NCCELL No.
BSC6900
SET GCELLIDLEFDD BA1(Mandatory) SET GCELLIDLETDD BA1(Mandatory) SET GCELL2GBA1( Mandatory) SET GCELLHO2GBA 2(Mandatory) SET GCELLHOFDDB A2(Mandatory) SET GCELLHOTDDB A2(Mandatory)
ITEMINDEX
item index
BSC6900
Number of a row to be changed in a MRFDBA list 210301 Reserved parameter for cells. There are 30 parameters of this type, which can be used as new SET parameters GCELLREV(Man in later MRFDdatory) versions. 210301 SET GCELLIDLEFDD BA1(Mandatory) SET GCELLIDLETDD BA1(Mandatory) SET GCELL2GBA1( Mandatory) SET GCELLHO2GBA 2(Mandatory) SET GCELLHOFDDB A2(Mandatory) SET Used for GCELLHOTDDB parameter A2(Mandatory) control Value of a SET reserved GCELLREV(Man parameter datory) for cells
Configuration Management
1~64
None None
None
Cell
None
Not involved
Not involved
None
Radio
Configuration Management
1~30
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
ITEMVALID
Item Valid
BSC6900
MRFD210301
Configuration Management
Enumeration Type
TRUE, FALSE
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
ITEMVALUE value
BSC6900
MRFD210301
Configuration Management
ITFT
Interface Type
BSC6900
ITFType
Interface Type
BSC6900
ADD IPPATH(Mandat ory) ADD ADJMAP(Manda tory) ADD TRMMAP(Mand atory) ADD BTSIPRT(Manda tory)
None GBFD118605
None
Interval Type 0~65535 IUB(Iub Interface), IUR(Iur Interface), IUCS(Iu-CS Interface), IUPS(Iu-PS Interface), ABIS(Abis Interface), A(A Interface), Enumeration ATER(ATER Type Interface) Enumeration Type PPP(PPP), MP(MP)
0~65535
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
IP QOS
PPP, MP
None None
None
BTS
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t
Radio
IUCTHD
Maximum traffic rate for restriction in the case of congestion on the IU interface. This parameter is valid only when "Board SET Class" is WRFDFCSW(Optional) "XPU". 040100 Whether to control signaling SET traffic on the FCSW(Optional) Concentric IU interface cell attributes of TRX. If the cell where a TRX is located is configured as a concentric cell, set this parameter to OVERLAID or UNDERLAID as required. If the cell where a TRX is located is not configured as a concentric cell, the default value SET of this GTRXIUO(Mand parameter is atory) NONE.
Flow Control
0~100
None None
70 Board
None
Not involved
Not involved
None
Equipme nt
IUFCSW
BSC6900
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
None
Equipme nt
IUO
Concentric Attribute
BSC6900
GBFD113201
OVERLAID(Over laid Subcell), UNDERLAID(Und erlaid Subcell), OVERLAID, NONE(None) UNDERLAID, NONE None None CONVERT0(Only convert at UL), CONVERT1(Only convert at OL), CONVERT2(UL first and convert allowed), CONVERT3(OL first and convert allowed)
None
TRX
This parameter is valid only when "IUOTP" in "MOD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
Radio
BSC6900
BSC6900
IUOTP
BSC6900
Conversion policy of the dynamic channel of SET the GCELLPSCHM( concentric Optional) cell. The triggering of concentric circle handovers must meet the P/N criteria, that is, when P out of N measurement reports meet the condition for concentric circle handovers, a concentric circle handover is triggered. This parameter corresponds SET to the P in GCELLHOIUO( the P/N Optional) criteria. The triggering of concentric circle handovers must meet the P/N criteria, that is, when P out of N measurement reports meet the condition for concentric circle handovers, a concentric circle handover is triggered. This parameter corresponds SET to the N in GCELLHOIUO( the P/N Optional) criteria. Whether a cell is a normal cell, concentric cell, or enhanced dual band network cell. In a concentric cell, the coverage areas of different TRXs form concentric circles of different radiuses. Owing to different coverage areas of the overlaid and underlaid parts, the two parts can be logically regarded as two cells. ADD With many GCELL(Optional channels, the ) overlaid part
GBFD113201
None None
CONVERT0
Cell
None
Not involved
Not involved
None
Radio
GBFD113201
0~16
None
4 Cell
Not involved
Not involved
None
Radio
GBFD113201
0~16
None
5 Cell
Not involved
Not involved
None
Radio
GBFD113201 GBFD114402
Normal_cell(Nor mal Cell), Concentric_cell( Concentric Cell), EDB_cell(Enhanc Normal_cell, ed Double Concentric_cell, Frequency Cell) EDB_cell
None Normal_cell
Normal_cell
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page153of316
150682621.xls.ms_office
Security Level:
BSC6900
CPU usage threshold for Iur downlink flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, flow control is triggered on the Iur downlink. This parameter is valid only SET when "Board FCCPUTHD(Opti Class" is WRFDonal) "XPU". 040100 Packet queue usage threshold for Iur downlink flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, flow control is triggered on the Iur downlink. This parameter is valid only when "Board Class" is "XPU". CPU usage threshold for recovery from Iur downlink flow control. When the average CPU usage of sliding windows is lower than the threshold, flow control on the Iur downlink is stopped. This parameter is valid only when "Board Class" is "XPU". Packet queue usage threshold for recovery from Iur downlink flow control. When the average packet queue usage of sliding windows is lower than the threshold, flow control on the Iur downlink is stopped. This parameter is valid only when "Board Class" is "XPU". Whether to control the traffic on the Iur downlink CPU usage threshold for Iur-g interface control. When the average CPU usage of sliding windows reaches or exceeds the threshold, resource auditing control is triggered. This parameter is valid only when "Board Class" is "XPU". Packet queue usage threshold for Iur-g interface. When the average packet queue usage of sliding windows reaches or exceeds the threshold, Iurg interface flow control is triggered. This parameter is valid only when "Board Class" is "XPU". CPU usage threshold for recovery from Iur-g interface control. When the average CPU usage of sliding windows is lower than the threshold, Iur-g interface control is stopped. This parameter is valid only when "Board Class" is Packet queue usage threshold for recovery from Iur-g interface. When the average packet queue usage of sliding windows is lower than the threshold, Iur-g interface control is stopped. This parameter is valid only when "Board Class" is "XPU". Whether to control traffic on the Iur-g interface
Flow Control
30~100
per cent
None
95 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
75 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
85 Board
None
Not involved
Not involved
None
Equipme nt
Iur downlink transfer restore IURDLRTHD threshold Iur downlink transfer flow control switch
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
65 Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
IURDLSW
BSC6900
SET FCSW(Optional)
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
None
Equipme nt
IURGCTHD
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
60 Board
None
Not involved
Not involved
None
Equipme nt
IURGCTHD
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
75 Board
None
Not involved
Not involved
None
Equipme nt
IURGRTHD
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
50 Board
None
Not involved
Not involved
None
Equipme nt
IURGRTHD
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
65 Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
IURGSW
BSC6900
SET FCSW(Optional)
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page154of316
150682621.xls.ms_office
Security Level:
IURULCTHD
BSC6900
CPU usage threshold for Iur uplink flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, flow control is triggered on the Iur uplink. This parameter is valid only SET when "Board FCCPUTHD(Opti Class" is WRFDonal) "XPU". 040100 Packet queue usage threshold for Iur uplink flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, flow control is triggered on the Iur uplink. This parameter is valid only when "Board Class" is "XPU". CPU usage threshold for recovery from Iur uplink flow control. When the average CPU usage of sliding windows is lower than the threshold, flow control over on the Iur uplink is stopped. This parameter is valid only when "Board Class" is "XPU". Packet queue usage threshold for recovery from Iur uplink flow control. When the average packet queue usage of sliding windows is lower than the threshold, flow control over on the Iur uplink is stopped. This parameter is valid only when "Board Class" is "XPU". Whether to control the traffic on the Iur uplink
Flow Control
30~100
per cent
None
95 Board
None
Not involved
Not involved
None
Equipme nt
IURULCTHD
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
75 Board
None
Not involved
Not involved
None
Equipme nt
IURULRTHD
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
85 Board
None
Not involved
Not involved
None
Equipme nt
IURULRTHD
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
65 Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
IURULSW
SET FCSW(Optional)
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
None
Equipme nt
SET OPT(Optional)
None
Enumeration Type
BSC6900
None
None
Enumeration Type
BSC6900
None
None
Enumeration Type
OFF(OFF), ON(ON) Hexadecimal(Hex decimal), Character_String (Character String) Hexadecimal(Hex decimal), Character_String (Character String)
OFF, ON
None None
OFF
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
Hexadecimal, Character_String
None
None
Not involved
Not involved
None
Equipme nt
Hexadecimal, Character_String
None
None
Not involved
Not involved
None
Equipme nt
J0RXT
SET OPT(Optional)
None
None
Enumeration Type
None None
16byte
Board
None
BSC6900
The setting of this paramete r must be consisten If the mode is not t with The parameter modification consistent, will interrupt that on has no impact on the service until it is consistent. the peer. equipment. None The setting of this paramete r must be consisten If the mode is not t with The parameter modification consistent, will interrupt that on has no impact on the service until it is consistent. the peer. equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
SET OPT(Optional)
None
None
String Type
J0TXBYTE_ FORMAT
J0 Byte Format
BSC6900
None
None
Enumeration Type
None 0~124 characters Hexadecimal(Hex decimal), Character_String (Character Hexadecimal, String) Character_String
None None
SBS 155
Board
None
BSC6900
Equipme nt
None
None
Not involved
Not involved
None
Equipme nt
J0TXT
J0 transmit type
BSC6900
SET OPT(Optional)
None
Enumeration Type
None None
16byte
Board
None
BSC6900
The setting of this paramete r must be consisten If the mode is not t with The parameter modification consistent, will interrupt that on has no impact on the service until it is consistent. the peer. equipment. None The setting of this paramete r must be consisten If the mode is not t with The parameter modification consistent, will interrupt that on has no impact on the service until it is consistent. the peer. equipment. None The setting of this paramete r must be consisten If the mode is not t with The parameter modification consistent, will interrupt that on has no impact on the service until it is consistent. the peer. equipment. None
Equipme nt
J0TXVALUE
J0 transmit value
BSC6900
SET OPT(Optional)
Sending value of J0
None
None
String Type
None
0~124 characters
None None
SBS 155
Board
None
BSC6900
Equipme nt
J0TYPE
J0 type
BSC6900
SET OPT(Optional)
J0 type
None
None
Enumeration Type
None None
16byte
Board
None
BSC6900
Equipme nt
SET OPT(Optional)
None
Enumeration Type
BSC6900
None
None
Enumeration Type
BSC6900
None
None
Enumeration Type
OFF(OFF), ON(ON) Hexadecimal(Hex decimal), Character_String (Character String) Hexadecimal(Hex decimal), Character_String (Character String)
OFF, ON
None None
OFF
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
Hexadecimal, Character_String
None
None
Not involved
Not involved
None
Equipme nt
Hexadecimal, Character_String
None
None
Not involved
Not involved
None
Equipme nt
J1RXT
SET OPT(Optional)
None
None
Enumeration Type
None None
16byte
Board
None
BSC6900
The setting of this paramete r must be consisten If the mode is not t with The parameter modification consistent, will interrupt that on has no impact on the service until it is consistent. the peer. equipment. None The setting of this paramete r must be consisten If the mode is not t with The parameter modification consistent, will interrupt that on has no impact on the service until it is consistent. the peer. equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
SET OPT(Optional)
None
None
String Type
J1TXBYTE_ FORMAT
J1 Byte Format
BSC6900
None
None
Enumeration Type
None 0~124 characters Hexadecimal(Hex decimal), Character_String (Character Hexadecimal, String) Character_String
None None
SBS 155
Board
None
BSC6900
Equipme nt
None
None
Not involved
Not involved
None
Equipme nt
J1TXT
J1 transmit type
BSC6900
SET OPT(Optional)
None
Enumeration Type
None None
16byte
Board
None
BSC6900
The setting of this paramete r must be consisten If the mode is not t with The parameter modification consistent, will interrupt that on has no impact on the service until it is consistent. the peer. equipment. None
Equipme nt
6/9/2013
Page155of316
150682621.xls.ms_office
Security Level:
J1TXVALUE
J1 transmit value
BSC6900
SET OPT(Optional)
None
String Type
None
0~124 characters
None None
SBS 155
Board
None
BSC6900
The setting of this paramete r must be consisten If the mode is not t with The parameter modification consistent, will interrupt that on has no impact on the service until it is consistent. the peer. equipment. None The setting of this paramete r must be consisten If the mode is not t with The parameter modification consistent, will interrupt that on has no impact on the service until it is consistent. the peer. equipment. None It is used for interwork ing with products of other The parameter modification manufact has no impact on the urers. equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
J1TYPE
J1 type
BSC6900
SET OPT(Optional)
J1 type
None
None
Enumeration Type
None None
16byte
Board
None
BSC6900
Equipme nt
Switch for the J2 tracing SET mark COPTLNK(Optio mismatching nal) alarm None SET COPTLNK(Optio Byte display nal) format of J2
None
Enumeration Type
OFF(OFF), ON(ON) Hexadecimal(Hex OFF, ON decimal), Character_String (Character Hexadecimal, String) Character_String
None None
OFF
Not involved
Not involved
Equipme nt
BSC6900
None
None
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
Equipme nt
J2MODE
J2 length
BSC6900
None
None
Enumeration Type
None None
None
Not involved
Not involved
None
None
String Type
None
0~64 characters
None None
None
None
None
Not involved
Not involved
1. This comman d is applicabl e to the boards AOUa, POUa, AOUc, POUc, and OIUa. 2. It is used for interwork ing with products of other The parameter modification manufact has no impact on the urers. equipment. None The parameter modification has no impact on the None equipment. None 1. This comman d is applicabl e to the boards AOUa and POUa. 2. It is used for interwork ing with products of other The parameter modification manufact has no impact on the urers. equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
J2TXVALUE
J2 transmit value
BSC6900
None
None
String Type
None
0~64 characters
None None
None
Not involved
Not involved
Equipme nt
JAUTOADD
BSC6900
JBF
BSC6900
A zero or a space used to fill in the J byte of the optical port based on the J byte of the peer equipment. If the J bytes are inconsistent, an alarm related to J byte mismatch will be reported and the negotiation of the optical port may fail, SET thus leading OPT(Optional) to SET deterioration COPTLNK(Optio of the nal) services. None Whether to enable the LAPD Jitter Buffer algorithm. This algorithm adds a buffering adaptation layer under the LAPD layer at the receiving end. The function at this layer is to delay the I frame (first received, last sent) currently received. If an I frame is received within the delayed duration, the frame is sent to the LAPD layer. In this SET way, the BTSJBF(Mandat frame GBFDory) disorder is 118401
None
Enumeration Type
ZERO(zero), SPACE(space)
ZERO, SPACE
None None
SPACE
Board
None
Optical port
The setting of this paramete r must be negotiate d with that on the If the mode is not interconn The parameter modification consistent, will interrupt ected has no impact on the service until it is consistent. side. equipment. None
BSC6900 V900R011
Equipme nt
Enumeration Type
None None
Whether the LAPD Jitter SET Buffer is OTHSOFTPARA enabled on GBFD(Optional) the BSC side 118601
Abis over IP
Enumeration Type
DENY(Deny), ALLOW(Allow)
DENY, ALLOW
None None
None When the disorder phenomenon is severe in the IP network, the recommended value is ALLOW; when there is no or little disordered packets, you are recommended to set this parameter to DENY to avoid extra transmission delay.
BTS
None
Not involved
Not involved
None
Transpor t
BSC69 00 None
Not involved
Not involved
None
Transpor t
K2MODE
K2 Mode
BSC6900
SET MSP(Optional)
Determines whether the last three bits of K2 indicates the single end and the dual GBFDend 111701
Board Switchover
Enumeration Type
None None
None
BSC6900
The setting of this paramete r must be negotiate d with that on the interconn The parameter modification ected has no impact on the side. equipment. None
Transpor t
KBIAS
K Bias
BSC6900
KEEPALIVE
BSC6900
LAC
Cell LAC
BSC6900
K offset used in K sequencing. To reduce ping-pong handovers, the system performs K sorting based on the downlink receive level of the candidate cells. But before doing that, the system subtracts "K Bias" from the actual downlink receive level GBFDSET of the 110601 GCELLHOAD(O candidate GBFDptional) cells. 510501 ADD PPPLNK(Option al) Duration of GBFDADD the PPP/MP 118611 MPLNK(Optional link keepGBFD) alive timer 118622 ADD GCELL(Mandato Location ry) area code ADD (LAC). MSs GEXT2GCELL( can freely Mandatory) move in the ADD local location GEXT3GCELL( area with no Mandatory) need of SET location FHO(Mandatory) update. ADD Reasonable GCELLQUICKS local ETUP(Mandator allocation can y) effectively ADD lighten the BTSAUTOPLAN( signaling load Mandatory) and improve SET the call BTSAUTOPLAN completion MRFDCFG(Optional) rate. 210301
0~63
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
1~30
PPP 2 link
None
BSC6900
None
BSC6900 V900R011
Transpor t
Configuration Management
1~65533, 65535
None None
None
Cell
None
Not involved
Not involved
The LAC can be input in hexadeci mal format. The hexadeci mal format is H'****, for The parameter modification example, has no impact on the H'1214. equipment. None
Radio
6/9/2013
Page156of316
150682621.xls.ms_office
Security Level:
LAC1
Cell LAC
BSC6900
Location area code (LAC). The MS can move within the local location area without location update. The reasonable classification of the location area is very important for reducing the signaling load SET and BTSAUTOPLAN improving the GBFDCFG(Optional) put-through 510702 Aggregation mode. When this parameter is set to static aggregation, the LACP protocol is activated; otherwise, ADD the LACP ETHTRK(Mandat protocol is MRFDory) deactivated. 210103 Decimal value when the latitude where a cell is located is SET indicated in GCELLLCS(Man the format of GBFDdatory) degree 115402 Decimal value when the longitude where a cell is located is SET indicated in GCELLLCS(Man the format of GBFDdatory) degree 115402 Integer value when the latitude where a cell is located is SET indicated in GCELLLCS(Man the format of GBFDdatory) degree 115402 Value of the minute part when the latitude is indicated in SET the format of GCELLLCS(Man degree_minut GBFDdatory) e_second 115402 Decimal value of the second part when the latitude is indicated in SET the format of GCELLLCS(Man degree_minut GBFDdatory) e_second 115402 Integer value of the second part when the latitude is indicated in SET the format of GCELLLCS(Man degree_minut GBFDdatory) e_second 115402 Delay statistics period. This parameter indicates the period to collect the statistics information about the link transmission delay. Note that the unit of this parameter is 100 milliseconds. The actual delay statistics period is the value of this parameter ADD multiplied by IPLOGICPORT( 100 Optional) milliseconds. None Number of delay adjustment suspension periods. This parameter specifies the delay statistics periods in which the bandwidth is not adjusted when the bandwidth adjustment function of the logical port is triggered due to the change of the link transmission delay. This parameter can be used to control the rate of the bandwidth ADD adjustment at IPLOGICPORT( the logical Optional) port. None Bandwidth reduction delay threshold. This parameter is used to trigger the function of bandwidth reduction at the logical port when the link delay ADD exceeds the IPLOGICPORT( value of this Optional) parameter. None Average ADD delay IPLOGICPORT( reduction Optional) filtering index None Average ADD delay IPLOGICPORT( increase Optional) filtering index None Layer where a cell is located. The network designed by Huawei has four layers: Umbrella(4 layer), Macro(3 layer), Micro(2 layer), and Pico(1 layer). Each layer SET can be set GCELLBASICPA with 16 RA(Optional) priorities.
1~65533, 65535
None None
None
Cell
None
Not involved
Not involved
None
Radio
Link aggregation
Enumeration Type
None
Not involved
Not involved
Not involved
None
Transpor t
LATIDECI
BSC6900
String Type
None
1~5 characters
degr ee None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
0~90
degr ee None
None
Cell
None
Not involved
Not involved
None
Equipme nt
LATIINT
BSC6900
0~90
degr ee None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
0~59
minut e None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
0~9
seco nd None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
0~59
seco nd None
None
Cell
None
Not involved
Not involved
None
Equipme nt
LATPRD
BSC6900
None
100~10000, step:100
ms
IP logical 2 port
None
Not involved
Not involved
None
Transpor t
LATSUSTM
BSC6900
None
0~100
None
IP logical 4 port
None
Not involved
Not involved
None
Transpor t
LATTH
Rate down threshold for delay [ms] BSC6900 average delay down filter mantissa
None
0~10000
ms
25
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
LATUDK
BSC6900
None
0~15
None
None
Not involved
Not involved
None
Transpor t
LATUPK
BSC6900
None
0~15
None
None
Not involved
Not involved
None
Transpor t
LAYER
BSC6900
GBFD110601 GBFD510501
Enumeration Type
1, 2, 3, 4
1, 2, 3, 4
None None
None
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page157of316
150682621.xls.ms_office
Security Level:
LAYER
BSC6900
A network basically consists of four layers, namely, Umbrella, Macro, Micro, and Pico. Cell priorities influence the sorting of neighboring cells during handovers as well as handover algorithms including PBGT and inter-layer handovers. For example, PBGT handovers can only occur among cells on a same layer and of a same priority level. If you assign different
GBFD110601 GBFD510501
Enumeration Type
1, 2, 3, 4
1, 2, 3, 4
None None
None
Cell
There are four network layers, that is, layer 1 to layer 4. A lower layer No. indicates a higher priority. The cell priority is determined by both the network layer and the Read & "PRIOR" parameter. Write
Not involved
Not involved
None
Radio
BSC6900
Whether to support the LCS function. This function needs the support of the MSC. Therefore, this parameter must be properly set according to the SET supporting AITFOTHPARA( capacity of GBFDOptional) the MSC. 115402
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
MSC
None
Not involved
Not involved
The setting of this paramete r needs negotiati on with the opposite network The parameter modification element has no impact on the MSC. equipment. None
Equipme nt
LDRFOUH
LDR Fourth
BSC6900
SET LDR(Optional)
Abis over IP
Enumeration Type
CLOSE(Close), PSDOWN(PS Downspeeding), AMRC(AMRC), CSPH(CS Preference TCHH), CLOSE, PSDOWN, CSFHHO(CS AMRC, CSPH, TCHF-TCHH HO) CSFHHO CLOSE(Close), PSDOWN(PS Downspeeding), AMRC(AMRC), CSPH(CS Preference TCHH), CLOSE, PSDOWN, CSFHHO(CS AMRC, CSPH, TCHF-TCHH HO) CSFHHO CLOSE(Close), PSDOWN(PS Downspeeding), AMRC(AMRC), CSPH(CS Preference TCHH), CLOSE, PSDOWN, CSFHHO(CS AMRC, CSPH, TCHF-TCHH HO) CSFHHO
None None
None
If this parameter is not set to CLOSE, it value must not be the same as BSC69 "LDRSND", "LDRTRD", Read & 00 or "LDRFST". Write
Not involved
Not involved
None
Transpor t
LDRFST
LDR First
BSC6900
SET LDR(Optional)
GBFD118601
Abis over IP
Enumeration Type
None None
None
If this parameter is not set to CLOSE, it value must not be the same as BSC69 "LDRSND", "LDRTRD", Read & 00 or "LDRFOUH". Write
Not involved
Not involved
None
Transpor t
LDRSND
LDR Second
BSC6900
SET LDR(Optional)
GBFD118601
Abis over IP
Enumeration Type
None None
None
If this parameter is not set to CLOSE, it value must not be the same as BSC69 "LDRFST", "LDRTRD", Read & 00 or "LDRFOUH". Write
Not involved
Not involved
None
Transpor t
LEIBRZ
BSC6900
load EQ index used by the ADD current ADJMAP(Manda adjacent tory) node Gold user load EQ index used by the ADD current ADJMAP(Manda adjacent tory) node Silver user load EQ index used by the ADD current ADJMAP(Manda adjacent tory) node
None
None
0~63
None None
None
The load EQ table index is configured by setting Adjace the value of "LEI" in nt node "ADD LOADEQ".
Not involved
Not involved
The load EQ table is configure The parameter modification d has no impact on the already. equipment. None The load EQ table is configure The parameter modification d has no impact on the already. equipment. None The load EQ table is configure The parameter modification d has no impact on the already. equipment. None The paramete r cannot be modified. Not involved
Transpor t
LEIGLD
BSC6900
None
None
0~63
None None
None
The load EQ table index is configured by setting Adjace the value of "LEI" in nt node "ADD LOADEQ".
Not involved
Not involved
Transpor t
LEISLV
BSC6900
None
None
0~63
None None
None
The load EQ table index is configured by setting Adjace the value of "LEI" in nt node "ADD LOADEQ".
Not involved
Not involved
Transpor t
LENO
BSC6900
LEVEL
Log Level
BSC6900
ADD M3LE(Mandator y) Local entity ADD No. of M3DE(Mandator identifying a y) unique entity. None GBFD111203 EXP Level of the MRFDLOG(Optional) log 210305
Interval Type 0~182 0~182 None None CRITICAL(Critica l), Enumeration MAJOR(Major), CRITICAL, MAJOR, Type MINOR(Minor) MINOR None None INFO(Information Level), WARN(Warn level), ERR(Error Level), AST(Assert INFO, WARN, ERR, Level) AST
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
None
RNC
None
Not involved
Not involved
None
Equipme nt
LEVEL
Log Level
BSC6900
LEVEL
O&M of BSC
None None
None
RNC
None
Not involved
Not involved
Not involved
None
None
None
LEVEL
Log Level
BSC6900
MRFD210304
Faulty Management
Enumeration Type
None None
ON
BSC69 00 None
Not involved
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt Equipme nt
None None
None
RNC
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
Level
MD LEVEL
BSC6900
GBFD118630
LEVELRPT
BSC6900
Whether to support GBFDSET reporting the 110801 GCELLBASICPA main diversity GBFDRA(Optional) level 110802 Whether to allow interlayer and inter-level handovers. The interlayer and inter-level handover algorithm is achieved through the setting of different layers and priorities for cells, which switches traffic to cells of a higher precedence (decided by "Layer of the cell" and "Cell priority" together). Hysteresis value during the handovers between cells on different layers or of different priorities. This value is used to suppress inter-layer ping-pong handovers. Inter-layer handover threshold of the serving cell = "Interlayer HO threshold" "Inter-layer HO Hysteresis"; Inter-layer handover threshold of a neighboring cell = "Interlayer HO threshold" + "Adjacent
Ethernet OAM Interval Type Processing of Measurement Report Pre-processing of Measurement Enumeration Report Type
0~7
0~7
None
Not involved
Not involved
Not involved
None
Transpor t
None None
None
Cell
None
Not involved
Not involved
None
Radio
LEVHOEN
Level HO Allowed
BSC6900
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM1. Write
Not involved
Not involved
None
Radio
BSC6900
GBFD110601 GBFD510501
0~63
dB
None
2 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page158of316
150682621.xls.ms_office
Security Level:
LEVLAST
BSC6900
LEVSTAT
BSC6900
The triggering of inter-layer handovers must meet the P/N criteria, that is, when the condition for inter-layer handovers is met for a consecutive P seconds during N seconds, an inter-layer handover is triggered. This parameter corresponds to the P in the P/N criteria. The triggering of inter-layer handovers must meet the P/N criteria, that is, when the condition for inter-layer handovers is met for a consecutive P seconds during N seconds, an inter-layer handover is triggered. This parameter corresponds to the N in the P/N criteria.
GBFD110601 GBFD510501
1~16
None
2 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "LEVHOEN" is set to YES. The following condition must be met: "LEVSTAT" >= Read & "LEVLAST". Write
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the macro subcell; If this parameter is set to a smaller value, unnecessary handovers may be The parameter modification performed, thus the voice quality is has no impact on the decreased and ping-pong handovers may Versions earlier than equipment. be performed. BSC6900 V900R011
Radio
GBFD110601 GBFD510501
LOD PATCH(Optional ) CON Logic PATCH(Optional function type ) of the board Logic function type of the board OAM:Operati on And Maintenance Process TDM_Switchi ng:TDM switching process GCP:GSM BSC Control plane Process UCP:UMTS RNC Control plane Process RGCP:Resou rce Management and GSM BSC Control plane Process RUCP:Resou rce Management and UMTS RNC Control plane ADD Process BRD(Optional) IBCA:Interfer ADD PPPLNK(Mandat ory) ADD MPGRP(Mandat Logical ory) function type Application type of the ADD PoucTDM BRD(Optional) board
MRFD210301
Configuration Management
Interval Type 1~16 TDM_Switching, GCP, UCP, RGCP, RUCP, IBCA, GTC, GPCU, UUP, ATM, IP, FR, HDLC, TDM, GbIP, Abis_TDM, Ater_TDM, Enumeration Pb_TDM, Type A_TDM, Abis_IP
1~16
None
3 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "LEVHOEN" is set to YES. The following condition must be met: "LEVSTAT" >= Read & "LEVLAST". Write
Not involved
Not involved
None
If this parameter is set to a greater value, unnecessary handovers may be performed, thus the voice quality is decreased and ping-pong handover may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the congestion may occur in the macro Versions earlier than equipment. subcell. BSC6900 V900R011
Radio
TDM_Switching, GCP, UCP, RGCP, RUCP, IBCA, GTC, GPCU, UUP, ATM, IP, FR, HDLC, TDM, GbIP, Abis_TDM, Ater_TDM, Pb_TDM, A_TDM, Abis_IP None None
None
None
None
Not involved
Not involved
None
Equipme nt
MRFD210301
Configuration Management
Enumeration Type
OAM, TDM_Switching, GCP, UCP, RGCP, RUCP, IBCA, GTC, GPCU, UUP, ATM, IP, FR, HDLC, TDM, GbIP, Abis_TDM, Ater_TDM, Pb_TDM, A_TDM, Abis_IP, SAU
OAM, TDM_Switching, GCP, UCP, RGCP, RUCP, IBCA, GTC, GPCU, UUP, ATM, IP, FR, HDLC, TDM, GbIP, Abis_TDM, Ater_TDM, Pb_TDM, A_TDM, Abis_IP, SAU None None
None
None
None
Not involved
Not involved
None
Equipme nt
GBFD118611 GBFD118622
Enumeration Type
IP, Abis_IP
IP, Abis_IP
None None
None
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
LGCUSAGE TYPE
MRFD210301
Configuration Management
Enumeration Type
A/Gb, Abis/Ater/Pb/Gb
A/Gb, Abis/Ater/Pb/Gb
None None
None
None
None
Not involved
Not involved
None
Equipme nt
LGIDX
LHUMTHD
BSC6900
The Logical ADD Index of PB PBSL(Optional) signaling link. Lower humidity threshold for the environment alarm box to report an alarm indicating that the ambient humidity is too low. If the ambient humidity of the BTS is lower than this threshold, the environment alarm box reports the alarm. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the SET correspondin BTSEXD(Option g parameter al) in another The occur threshold of 20258 alarm,you SET can set it LICALMTHD(Ma from 90% to ndatory) 99% The recover threshold of 20258 alarm,you SET can set it LICALMTHD(Ma from 90% to ndatory) 99% It is the key field of LOP identifying LAPDLNK(Mand one LAPD atory) link.
GBFD111203
O&M of BSC
5120~5183
None None
None
None
None
Not involved
Not involved
Not involved
None
Equipme nt
GBFD111202
O&M of BTS
0~99
None None
10 BTS
None
Not involved
Not involved
This paramete r must be less than The parameter modification "UHUMT has no impact on the HD". equipment. None
Equipme nt
BSC6900
MRFD210304
Faulty Management
90~99
per cent
None
90 None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
MRFD210304
Faulty Management
70~95
per cent
None
70 None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
LINKNO
Link No.
BSC6900
GBFD111203
O&M of BSC
0~25599
None None
None
LAPDL NK None
Not involved
Not involved
Not involved
None
Equipme nt
LISTTYPE
Query Type
BSC6900
Type of the parameters to be displayed when a cell template is queried. The value "DIFFERENC E" indicates that the parameters in the cell template that are different from those in the default template are displayed. The value "ALL" indicates that all the parameters EXP in the cell GCELLTEMPLA template are TE(Optional) displayed. None Rate type of ADD the MTP3LNK(Optio designated nal) link. SET Lower limit ALMPORT(Optio for triggering nal) an alarm Lower limit of an alarm. It SET is valid for BTSENVALMPO the analog RT(Optional) port.
None
Enumeration Type
DIFFERENCE, ALL
DIFFERENCE, ALL
None
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
LKTATE
BSC6900
None MRFD210304
Enumeration Type
64K(64Kbit/s), 2M(2Mbit/s)
64K, 2M
bit/s
64K
64K
MTP3 link
None
Not involved
Not involved
Not involved
LL
Lower Limit
BSC6900
String Type
None
0~9 characters
None None
None
None
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Equipme nt
LL
Lower Limit
BSC6900
MRFD210301
Configuration Management
String Type
None
1~8 characters
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page159of316
150682621.xls.ms_office
Security Level:
LLCN
Channel No.
BSC6900
The loopback channel number when the port loopback mode is set to single channel local loopback None
None
Enumeration Type
TS1(Time_slot_1 ), TS2(Time_slot_2 ), TS3(Time_slot_3 ), TS4(Time_slot_4 ), TS5(Time_slot_5 ), TS6(Time_slot_6 ), TS7(Time_slot_7 ), TS8(Time_slot_8 ), TS9(Time_slot_9 ), TS10(Time_slot_ 10), TS11(Time_slot_ 11), TS12(Time_slot_ 12), TS13(Time_slot_ 13), TS14(Time_slot_ 14), TS15(Time_slot_ 15), TS16(Time_slot_ 16), TS17(Time_slot_ 17),
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
None
None
Not involved
Not involved
None
Equipme nt
LNA1
LNAThreshold1
BSC6900
Upper threshold of the low noise amplifier. When the working voltage of the low noise amplifier attenuator in the RXU board is smaller than this value, an SET alarm is BTSRXUBP(Opti reported by GBFDonal) the BTS. 111202 Lower threshold of the low noise amplifier. When the working voltage of the low noise amplifier attenuator in the RXU board is greater than this value, an SET alarm is BTSRXUBP(Opti reported by GBFDonal) the BTS. 111202
O&M of BTS
0~40
35 None
BTS
None
Not involved
Not involved
None
Equipme nt
LNA2
LNAThreshold2
BSC6900
O&M of BTS
40~80
45 None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
SET OPT(Optional)
None
None
Enumeration Type
LUCENT_MODE, HUAWEI_MODE , LUCENT_MODE, ALCATEL_MOD HUAWEI_MODE, E ALCATEL_MODE 8K(8Kbit/s), 16K(16Kbit/s), 32K(32Kbit/s), 64K(64Kbit/s), 2M(2Mbit/s)
None None
None
Board
None
BSC6900
The setting of this paramete r must be consisten t with The parameter modification that on has no impact on the the peer. equipment. None
Equipme nt
LNKRATE
Semilink Rate
BSC6900
GBFD114701
SemiPermanent Connection
Enumeration Type
None None
None
BSC
None
Not involved
Not involved
None
Transpor t
BSC6900
Initial bearing tag of the M3UA link. Only the active mode and standby mode are available. For the relevant ADD bearer tag, M3LNK(Optional see the ) RFC4666. None Link load sharing. In the value, the number of 1s (represented by n) determines the maximum number (2) of links for the load sharing. For example, B0000 indicates that up to one link is used for the load sharing, B0001 and B1000 indicate that up to two links are used for the load sharing. The additional links are not used for the load sharing. The AND ADD operation MTP3LKS(Optio between this nal) value and " None Signaling link mask correspondin g to the M3UA link set. It is used for the M3UA link load sharing. In the value, the number of 1s (represented by n) determines the maximum number (2) of links for the load sharing. For example, B0000 indicates that up to one link is used for the load sharing, B0001 and B0002 indicate that up to two links are used for the ADD load sharing. M3LKS(Optional The ) additional None When the load of a cell is lower than this parameter, the cell can serve users switched over from other cells due to load handovers; ADD otherwise, GEXT2GCELL( the cell will Optional) not serve ADD users GEXT3GCELL( switched Optional) over from GBFDSET other cells 110601 GCELLHOAD(O due to load GBFDptional) handovers. 510501 Type of load balancing algorithm of the MSC Pool. Generally, the BSC chooses an MSC according to the obtained network resource indication (NRI). In some cases, however, the BSC cannot do so. Instead, the BSC chooses a target MSC according to a load balancing GBFDalgorithm. 117401
None
Enumeration Type
Not involved
Not involved
Not involved
None
Transpor t
None
Enumeration Type
B0000(B0000), B0001(B0001), B0010(B0010), B0011(B0011), B0100(B0100), B0101(B0101), B0110(B0110), B0111(B0111), B1000(B1000), B1001(B1001), B1010(B1010), B1011(B1011), B1100(B1100), B1101(B1101), B1110(B1110), B1111(B1111)
None B1111
B1111
BSC69 00 None
Not involved
Not involved
Accordin g to the MTP3 load sharing principle, the link selection mask must be set properly. If the value is not set properly, the load sharing between MTP3 The parameter modification links may has no impact on the fail. equipment. None
Transpor t
None
Enumeration Type
B0000(B0000), B0001(B0001), B0010(B0010), B0011(B0011), B0100(B0100), B0101(B0101), B0110(B0110), B0111(B0111), B1000(B1000), B1001(B1001), B1010(B1010), B1011(B1011), B1100(B1100), B1101(B1101), B1110(B1110), B1111(B1111)
None B1111
B1111
BSC69 00 None
Not involved
Not involved
The mask is calculate d accordin g to the link set to a The parameter modification destinatio has no impact on the n entity. equipment. None
Transpor t
BSC6900
0~100
per cent
None
80 Cell
This parameter is valid only when "LoadHoEn" is Read & set to YES. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, handover to the corresponding cell may not be performed normally, thus the traffic congestion on the neighboring cells with high traffic cannot be relieved. The parameter modification If this parameter is set to a greater value, has no impact on the the corresponding cell may be overVersions earlier than equipment. loaded. BSC6900 V900R011
Radio
BSC6900
MSC Pool
Enumeration Type
MSC
None
Not involved
Not involved
None
Radio
6/9/2013
Page160of316
150682621.xls.ms_office
Security Level:
LOADBROA DCASTPERI NC2 Load OD Broadcast Period LOADCURR ENTDIV Load Current Shunt Coefficient
BSC6900
BSC6900
LoadHoEn
BSC6900
BSC6900
BSC6900
LOADHOPE NTIME
BSC6900
LOADHOPE NVALUE
BSC6900
LOADHOPE RIOD
BSC6900
LOADHOST EP
BSC6900
Period to send the load broadcast. Load current shunt coefficient This parameter specifies whether a traffic loadsharing handover is enabled. The load handover helps to reduce cell congestion, improve success rate of channel assignment, and balance the traffic load among cells, thus improving the network performance. The load handover is used as an emergency measure instead of a primary measure to adjust abnormal Indicates that if a 2G neighboring cell supports load handovers, the BSC adds the load information of the local cells in the signaling procedures related to this neighboring cell. Indicates that if a 3G neighboring cell supports load handovers, the BSC adds the load information of the local cells in the signaling procedures related to this neighboring cell. After a load handover succeeds, the BSC punishes the former serving cell during "Penalty time on load HO" by subtracting "Penalty value on load HO" from the receive level of the former serving cell, thus avoiding ping-pong handovers. After a load handover succeeds, the BSC punishes the former serving cell during "Penalty time on load HO" by subtracting "Penalty value on load HO" from the receive level of the former serving cell, thus avoiding ping-pong handovers. When the load of a cell reaches or exceeds "Load HO Threshold", all the calls that are using this cell as the serving cell generate handover requests at the same time, which will suddenly increase the load of the processor. Under some circumstance s, congestion occurs in the cell, which will result in call drop. To solve this problem, the BSC uses the hierarchical load handover algorithm to In hierarchical load handovers, starting from "Edge HO DL RX_LEV Threshold", a "Load HO Step Level" is added to the upper handover threshold after every "Load HO Step Period". In this way, all the calls in the current serving cell whose receive level is in the range "Edge HO DL RX_LEV Threshold" to "Edge HO DL RX_LEV Threshold" + "Load HO Bandwidth" are switched
GBFD116201 GBFD111202
1~10
None
4 BSC
None
Not involved
Not involved
O&M of BTS
0~1000
None
100 None
BTS
None
Not involved
Not involved
This paramete r is valid only when "NC2Loa dResel" is set to The parameter modification SUPPOR has no impact on the T. equipment. None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
GBFD110601 GBFD510501
0~255
None
10 Cell
This parameter is valid only when "HOCTRLSWITCH" in "SET GCELLHOBASIC" is set to HOALGORITHM2.
Not involved
Not involved
None
If this parameter is set to a greater value, it is difficult for the MS to be handed over to the serving cell, thus leading to call drop when there is no suitable neighboring cell. If this parameter is set to a smaller value, The parameter modification the MS is likely to be handed over to the has no impact on the serving cell again, thus leading to pingVersions earlier than equipment. pong handovers. BSC6900 V900R011
Radio
GBFD110601 GBFD510501
0~63
dB
None
63 Cell
This parameter is valid only when "HOCTRLSWITCH" in "SET GCELLHOBASIC" is set to HOALGORITHM2.
Not involved
Not involved
None
If this parameter is set to a greater value, it is difficult for the MS to be handed over to the serving cell, thus leading to call drop when there is no suitable neighboring cell. If this parameter is set to a smaller value, The parameter modification the MS is likely to be handed over to the has no impact on the serving cell again, thus leading to pingVersions earlier than equipment. pong handovers. BSC6900 V900R011
Radio
GBFD110601 GBFD510501
1~255
None
10 Cell
This parameter is valid only when "LOADHOEN" in "SET GCELLHOBASIC" is set Read & to YES. Write
Not involved
Not involved
None
Radio
GBFD110601 GBFD510501
1~63
dB
None
5 Cell
This parameter is valid only when "LOADHOEN" in "SET GCELLHOBASIC" is set to YES. The value of this parameter must be smaller than Read & "LOADOFFSET". Write
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the neighboring The parameter modification cells in a short time; if this parameter is has no impact on the set to a smaller value, congestion in the Versions earlier than equipment. serving cell is difficult to be relieved. BSC6900 V900R011
Radio
6/9/2013
Page161of316
150682621.xls.ms_office
Security Level:
LOADOFFS ET
Load HO Bandwidth
BSC6900
In the handover algorithm of the first generation, load handovers can be performed only when the receive level of the current serving cell is in the range "Edge HO DL RX_LEV Threshold" to "Edge HO DL RX_LEV Threshold" + "Load HO Bandwidth". In the handover algorithm of the second generation, load handovers can be SET performed GCELLHOAD(O only when ptional) the level
GBFD110601 GBFD510501
0~63
dB
None
25 Cell
This parameter is valid only when "LOADHOEN" in "SET GCELLHOBASIC" is set Read & to YES. Write
Not involved
Not involved
None
Radio
BSC6900
Whether to enable load power-off. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
BSC6900
Whether to SET allow the cell GCELLNC2PAR load GBFDA(Optional) reselection 116201 Threshold for allowing the MS to reselect a cell during load reelection. The load reselection can be performed only when the receiving level of the SET MS is below GCELLNC2PAR this GBFDA(Optional) threshold. 116201 When the cell load is below this threshold, the cell can accept the load reselection subscribers from other cells. When the TBF multiplexing ratio is less than the percentage, the cell can accept the load reselection SET subscribers GCELLNC2PAR from other GBFDA(Optional) cells. 116201 When the cell load exceeds this threshold, the SET load GCELLNC2PAR reselection is GBFDA(Optional) started. 116201 If this parameter is set to YES, the channel assignment algorithm II randomly selects the start range for channel traversal; otherwise, the algorithm selects the channel next to the channel assigned last time as the SET start point of GCELLCHMGA channel GBFDD(Optional) traversal. 111005 SET TRM load BTSABISPRIMA threshold P(Optional) switch None SET GBSCREDGRP( Local BSC GBFDMandatory) identity. 113725 GBFD118611 GBFD118622
Enumeration Type
None None
PERMIT
Cell
None
Not involved
Not involved
The function of cell load reselecti on is valid only when "NC2Loa dResel" in "SET BSCPSS OFTPAR A" is set to Support and "LOADR ESELAL LOW"is The parameter modification set to has no impact on the Permit. equipment. None
Radio
0~63
dB
None
40 Cell
None
Not involved
Not involved
None
Radio
0~100
per cent
None
60 Cell
None
Not involved
Not involved
None
Radio
BSC6900
0~100
per cent
None
85 Cell
None
Not involved
Not involved
None
Radio
LOADSHAR EALLOW
BSC6900
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
LOADTHSW
BSC6900
OFF, ON
None None
None
BTS
None
Not involved
Not involved
None
LocalBSCID
Local BSC ID
BSC6900
0~65534
None None
None
BSC69 00 None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
BSC6900 V900R011
LOCALIP
Local IP address
BSC6900
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
Not involved
LOCALIP
Local IP address
BSC6900
GBFDADD Local IP 118611 MPGRP(Mandat address of GBFDory) the MP group 118622 ADD BTSPPPLNK(Ma ndatory) ADD BTSMPGRP(Ma Local IP ndatory) address
IP Address Type
None
None
MP group
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The local IP address and peer IP must be configure d in the same network segment. The peer IP address cannot be the same with the local IP address The parameter modification of the has no impact on the BSC. equipment. None
Transpor t
Transpor t
LOCALIP
Local IP address
BSC6900
GBFD118611
IP Address Type
None
None
BTS
BTS
None
Transpor t
BSC6900
BSC6900
ADD NSVLLOCAL(Ma ndatory) ADD SGSNROUTEIN FO(Mandatory) ADD BTSLOCGRP(M andatory) ADD BTSRXU2LOCG RP(Mandatory) SWP BTSLOCGRP(M andatory) ADD BTSOBJALMSH LD(Mandatory)
Identifies a GBFDlocal NSVL. 118603 Identifies the local port of GBFDthe router. 118603
Gb over IP
0~1023
None None
None
NSE
None
Not involved
Not involved
Not involved
Gb over IP
0~1
None None
None
BSC
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
BSC6900
BSC6900
Number of the location group under the BTS. It is unique for GBFDeach BTS. 510104 Number of a location GBFDgroup 510104
Multi-site Cell
0~35
None None
None
BTS
None
Not involved
Not involved
Not involved
Multi-site Cell
0~35
None None
None
BTS
None
Not involved
Not involved
The paramete r cannot be modified. Not involved Not involved The parameter modification has no impact on the None equipment. None
Equipme nt Equipme nt
6/9/2013
Page162of316
150682621.xls.ms_office
Security Level:
LOCIP1
BSC6900
First local IP ADD address. The SCTPLNK(Mand invalid value atory) is 0. None
None
IP Address Type
None
None
SCTP link
None
SCTP link
The services are interrupted until the SCTP link is working normally.
The both end address of the SCTP is the paramete r for the interconn ection. The value can be modified after the negotiati on with The parameter modification the peer has no impact on the system. equipment. None The both end address of the SCTP is the paramete r for the interconn ection. The value can be modified after the negotiati on with The parameter modification the peer has no impact on the system. equipment. None
Transpor t
LOCIP2
BSC6900
Second local ADD IP address. SCTPLNK(Optio The invalid nal) value is 0. None Whether to lock all the SET non-default OPLOCK(Manda local tory) accounts GBFD111203 MRFD210305
None
IP Address Type
None
None
SCTP link
None
SCTP link
The services are interrupted until the SCTP link is working normally.
Transpor t
LOCKST
Enumeration Type
OFF(Unlock), ON(Lock)
OFF, ON
None ON
OFF
RNC
None
Not involved
Not involved
None
Equipme nt
LOCPN
BSC6900
ADD SCTPLNK(Mand Local SCTP atory) port No. SET LODCTRL(Mand board start atory) load control.
None
None
LODCTRL
BSC6900
MRFD210301
Configuration Management
Interval Type 1024~65535 LFB(Load from OMU and write flash), Enumeration CL(Consult Type Load) NORMMODE(No rmal Mode), RAPMODENOS ERV(Rapid Mode<No service>), RAPMODERESS ERV(Rapid Mode<Reserve BCCH trx>)
1024~65535
None None
None
SCTP link
When the value of "MODE" in "ADD SCTPLNK" is set to Client, this parameter can be modified.
SCTP link
The services are interrupted until the SCTP link is working normally.
The paramete r can be modified when "MODE" in the comman d "ADD SCTPLN The parameter modification K" is set has no impact on the to Client. equipment. None The parameter modification has no impact on the equipment. None
Transpor t
LFB, CL
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
LODMODE
Loading Mode
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
LOGCTHD
BSC6900
CPU usage threshold for log flow control. When the average CPU usage of sliding windows reaches or exceeds the SET threshold, log FCCPUTHD(Opti flow control WRFDonal) is triggered. 040100 Packet queue usage threshold for log flow control. When the average packet queue usage of sliding windows reaches or exceeds the SET threshold, log FCMSGQTHD(O flow control WRFDptional) is triggered. 040100 Whether to specify the ADD SCTP to bind SCTPLNK(Mand the logic atory) port. None
Flow Control
30~100
per cent
None
95 Board
None
Not involved
Not involved
None
Equipme nt
LOGCTHD
BSC6900
Flow Control
30~100
per cent
None
80 Board
None
Not involved
Not involved
None
Equipme nt
LOGPORTF LAG
BSC6900
None
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
SCTP link
This parameter determines whether "LOGPORTSN" and "LOGPORTNO" in "ADD Read & SCTPLNK" are valid. Write
Not involved
Not involved
None
Transpor t
BSC6900
ADD Logic port SCTPLNK(Mand No. bound by atory) the SCTP. None
None
0~988
None None
None
SCTP link
When the value of "LOGPORTFLAG" in "ADD SCTPLNK" is set to ON, this parameter is valid.
SCTP link
The services are interrupted until the SCTP link is working normally.
It is valid when "LOGPO RTFLAG[ /PARA in the comman d "ADD The parameter modification SCTPLN has no impact on the K" is ON. equipment. None It is valid when "LOGPO RTFLAG[ /PARA in the comman d "ADD The parameter modification SCTPLN has no impact on the K" is ON. equipment. None
Transpor t
Logic port ADD slot No. SCTPLNK(Mand bound by the atory) SCTP. None CPU usage threshold for recovery from log flow control. When the average CPU usage of sliding windows is lower than the threshold, SET log flow FCCPUTHD(Opti control is WRFDonal) triggered. 040100 Packet queue usage threshold for recovery from log flow control. When the average packet queue usage of smooth windows is lower than the threshold, SET log flow FCMSGQTHD(O control is ptional) triggered. Whether to SET control the FCSW(Optional) log flow
None
0~5, 8~27
None None
None
SCTP link
When the value of "LOGPORTFLAG" in "ADD SCTPLNK" is set to ON, this parameter is valid.
SCTP link
The services are interrupted until the SCTP link is working normally.
Equipme nt
LOGRTHD
BSC6900
Flow Control
30~100
per cent
None
85 Board
None
Not involved
Not involved
None
Equipme nt
LOGRTHD
BSC6900
WRFD040100 WRFD040100
Flow Control
30~100
per cent
None
70 Board
None
Not involved
Not involved
None
LOGSW
BSC6900
Flow Control
LOGTYPE
BSC6900
GBFD111203
O&M of BSC
ON, OFF PFM_RESULT, HOST_PFM_RE SULT, ACTIVE_DEF_M EAS_FILE, STANDBY_DEF_ MEAS_FILE, PFM_SWITCHS, HISTORY_ALAR M, HISTORY_FAUL T, ALM_SYSTEM_ CFG, SECURITY_LOG , OPT_LOG, OMU_LOG, BSC_CFG_MML , CELL_BASIC_IN FO, BSC_SERIES_N O, DB_BAK, MEM_DB_BAK, BTS_BASIC_INF O, BTS_CHECK_L OG, BTS_DEBUG_L OG, BTS_CHR_LOG, TRX_LOG, BTS_NET_TABL E,
ON, OFF None None PFM_RESULT, HOST_PFM_RESUL T, ACTIVE_DEF_MEA S_FILE, STANDBY_DEF_ME AS_FILE, PFM_SWITCHS, HISTORY_ALARM, HISTORY_FAULT, ALM_SYSTEM_CF G, SECURITY_LOG, OPT_LOG, OMU_LOG, BSC_CFG_MML, CELL_BASIC_INFO, BSC_SERIES_NO, DB_BAK, MEM_DB_BAK, BTS_BASIC_INFO, BTS_CHECK_LOG, BTS_DEBUG_LOG, BTS_CHR_LOG, TRX_LOG, BTS_NET_TABLE, DEBUG_LOG, LAST_WORD, DSP_DEBUG_LOG, HOST_LOG, 2G_CHR_LOG, 3G_CHR_LOG, 2G_UNILATERAL_C ONNECT, None None
ON
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
None
RNC
None
Not involved
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
LOGTYPE
Log Type
BSC6900
Type of the log. "COMLOG" STR indicates a BTSLOG(Manda common log. tory) "CMPLOG" ULD indicates a BTSLOG(Manda compressed GBFDtory) log. 111202
O&M of BTS
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page163of316
150682621.xls.ms_office
Security Level:
LONGIDECI
Decimal value when the longitude where a cell is located is SET indicated in GCELLLCS(Man the format of GBFDdatory) degree 115402 Value of the degree part when the latitude is indicated in SET the format of GCELLLCS(Man degree_minut GBFDdatory) e_second 115402 Integer value when the longitude where a cell is located is SET indicated in GCELLLCS(Man the format of GBFDdatory) degree 115402 Value of the minute part when the longitude is indicated in SET the format of GCELLLCS(Man degree_minut datory) e_second Decimal value of the second part when the longitude is indicated in SET the format of GCELLLCS(Man degree_minut datory) e_second
String Type
None
1~5 characters
degr ee None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
0~180
degr ee None
None
Cell
None
Not involved
Not involved
None
Equipme nt
LONGIINT
BSC6900
0~180
degr ee None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD115402
0~59
minut e None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD115402
0~9
seco nd None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
Integer value of the second part when the longitude is indicated in SET the format of GCELLLCS(Man degree_minut GBFDdatory) e_second 115402 Loop type. 1. Local loop:Make loop test on the local board at system side, while the system platform will send test frames. 2. Remote loop:The remote-loop will be made by the device on the other side of the local board. In this case, the local board don't need to make loop opertation STR except FRPORTLOOP( sending test GBFDMandatory) frames. 510002
0~59
seco nd None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
Gb Over FR
Enumeration Type
None None
None
BC
None
Not involved
Not involved
None
Equipme nt
LOOPTYPE
Loop type
BSC6900
LOP Loopback LAPDLNK(Mand type of LAPD GBFDatory) link 111203 When the load of an SDCCH on the TRX that is in loose frequency reuse and is in the compatible band of the BCCH is lower than this threshold, the SDCCH is preferably GBFDallocated. 117002 Direction of an external GBFDvoice loop 111203 Loopback point. There are 14 loopback points. Whether a loopback point is available depends on the subrack configuration mode in the BSS and the transmission mode of each interface. The details are as follows: NSS Interface Unit: indicates the A interface board in various configuration modes, such as BM/TC separated, BM/TC GBFDcombined, 111203
O&M of BSC
Enumeration Type
M(Line Loop), LOOP_TYPE_L VDS(LVDS Loop), LOOPTYPE_TDM, LOOPTYPE_MC LOOP_TYPE_LVDS C(MCC Loop) , LOOPTYPE_MCC None None
None
None
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
LOPDIR
Loop Direction
BSC6900
LOPLOC
Loop Position
BSC6900
IBCA (Interference Based Channel Allocation) Interval Type 0~100 MSC(MSC Direction), Enumeration MS(MS O&M of BSC Type Direction) NSSAINTF(NSS Interface Unit), NSSTCTOABIS( NSS TC(Near Abis Interface)), NSSTCTOA(NSS TC(Near A Interface)), NSSTNUTOABIS (NSS TNU(Near Abis Interface)), NSSTNUTOA(NS S TNU(Near A Interface)), NSSATERINTF( NSS Ater Interface Unit), BSSATERINTF( BSS Ater Interface Unit), BSSTCTOABIS( BSS TC(Near Abis Interface)), BSSTCTOA(BSS TC(Near A Interface)), BSSTNUTOABIS (BSS TNU(Near Abis Interface)), BSSTNUTOA(BS S TNU(Near A Interface)), Enumeration BSSABISINTF(B O&M of BSC Type SS Interface
0~100
per cent
None
80 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
MSC, MS
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
NSSAINTF, NSSTCTOABIS, NSSTCTOA, NSSTNUTOABIS, NSSTNUTOA, NSSATERINTF, BSSATERINTF, BSSTCTOABIS, BSSTCTOA, BSSTNUTOABIS, BSSTNUTOA, BSSABISINTF, BTSTMU, BTSTRUDSP
None None
None
BSC69 00 None
Not involved
Not involved
LOPT
Loop type
BSC6900
Loopback type
None
None
Enumeration Type
NO_LOOP(No loop), REMOTE_LOOP (Remote loop), LINE_REM_LOO P(Line remote loop), LOCAL_LOOP(L ocal loop), PAYLOAD_LOO P(payload loop), SIN_CHN_LOC(s ingle channel local loop), SIN_CHN_REM( single channel remote loop)
NO_LOOP, REMOTE_LOOP, LINE_REMOTE_LO OP, LOCAL_LOOP, PAYLOAD_LOOP, SIN_CHN_LOC, CIN_CHN_REM None None
None
E1/T1 port
None
E1/T1 port
LOPT
Loop type.
BSC6900
LOPTIME
Loop Time
BSC6900
None GBFD111203
None
Enumeration Type
None None
None
BSC6900
None If this paramete r is set to REMOT E_LOOP and LOCAL_ LOOP, the service on this link is affected until the loopback is cancelled . When the upper layer bearer is IMAGRP , IMAGRP is reset after the loopback is canceled. Otherwis e, the state of the When the loopback type is changed to REMOT E_LOOP or LOCAL_ LOOP, the service is affected. The service becomes normal when the loopback test is canceled. When the loopback type is set to LOCAL_ LOOP, you cannot directly change it to REMOT E_LOOP
Equipme nt
Equipme nt
O&M of BSC
60~600
180 None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt Equipme nt
BSC6900 V900R011
6/9/2013
Page164of316
150682621.xls.ms_office
Security Level:
LOSTSUST M
BSC6900
Number of suspension periods after the bandwidth adjustment is performed based on the packet drop ratio. This parameter specifies the delay statistics periods in which the bandwidth is not adjusted when the bandwidth adjustment function of the logical port is triggered due to the change of the packet drop ratio. This parameter can be used ADD to control the IPLOGICPORT( rate of the Optional) bandwidth None Whether to permit the preemption of lower-level sublink resources. If the value of this parameter is YES, a CS domain service can preempt the sublink resources of the PS domain services on the lowerlevel BTS of the cascaded BTSs when the CS domain service fails to preempt the sublink of the correspondin GBFDg level. 117301
None
1~100
None
IP logical 1 port
None
Not involved
Not involved
None
Transpor t
Flex Abis
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
This parameter is valid when "FLEXABISMODE" in the "MOD BTS" Read & command is set to YES. Write
Not involved
Not involved
None
Transpor t
BSC6900
The CS services are preferred. This parameter indicates that the CS services are permitted to preempt the dynamic Abis resources on SET the sublink of BTSFLEXABISP the current GBFDARA(Optional) level site. 117301
Flex Abis
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
LOWNOISE SWH
BSC6900
Whether to permit the low noise SET amplifier GCELLOTHBASI (LNA) C(Optional) bypass Whether to assign overlay channels in an IUO cell SET based on the GCELLCHMGA receive level D(Optional) conditions Whether to power off the TRX in the case of overlow temperature of the BTS cabinet. If this parameter is set to "Yes", the BTS powers off the TRX and reports a "Load Power Off Alarm" to protect the TRX in the case of overlow temperature of the BTS cabinet. When the cabinet temperature returns to 0 celsius degree, the BTS powers SET on the TRX, BTSAPMUBP(O and the ptional) alarm Whether to power off the TRX of a BTS when the temperature of the BTS cabinet is too low. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another ptional) mode. STR TRANSPERFTS T(Mandatory)
GBFD111202
O&M of BTS
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
None
Cell
None
Not involved
Not involved
The parameter modification has no impact on the None equipment. None For the BTS3002 C, if each cell is configure d with two TRXs (O2 or S2) and the value of this paramete r is YES, the radio frequenc y (RF) connectio n supports the configura tion of the main diversity antennas . Only the BTS3002 C has this The parameter modification paramete has no impact on the r. equipment. None
Radio
Equipme nt
BSC6900
GBFD113201
OFF(Off), ON(On)
OFF, ON
None None
ON
Cell
None
Not involved
Not involved
None
Radio
GBFD111202
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
LPBKMODE
BSC6900
GBFD111203
O&M of BSC
Enumeration Type
NO(NO), YES(YES) NO, YES E1(E1 Loopback), TIMESLOT(Time slot Loopback) E1, TIMESLOT
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
LPN
BSC6900
None
None
LPN
BSC6900
ADD IPLOGICPORT( Optional) SET BTSIP(Mandator Logical port y) number IP logic port slot No. carried by the IP path
None
None
0~988 None None FG2a/GOUa/UOIa(I P)board:0~119;FG2 c/GOUcboard:0~499 , 512~767;POUc(IP)b 0~988,1024~153 oard:0~988, Interval Type 5 1024~1535 None None
None
When the value of "CARRYFLAG" in "ADD IPPATH" is set to IP LGCPORT, this IP path parameter is valid.
IP path
None
Transpor t
None
IP logical port
None
Not involved
Not involved
Not involved
None
Transpor t
LPNSN
BSC6900
None
None
0~5, 8~27
None None
None
When the value of "CARRYFLAG" in "ADD IPPATH" is set to IP LGCPORT, this IP path parameter is valid.
IP path
None
Equipme nt
LPNTYPE
BSC6900
None
None
Enumeration Type
Hub(Hub), Leaf(Leaf)
Hub, Leaf
None None
None
None
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page165of316
150682621.xls.ms_office
Security Level:
LQCMODE
BSC6900
It is applicable to the radio transmission environment to improve the link quality. Link adaptation (LA) indicates adjusting the coding mode of the channel dynamically according to the transmission quality of the link. The link transmission quality is measured by the 8PSK MEAN BEP and 8PSK CV BEP in the Packet EGPRS Downlink SET Ack/Nack GCELLEGPRSP message GBFDARA(Optional) sent by the 114201 Whether to enable power shutdown upon low voltage of the battery. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202 Load poweroff voltage threshold. If "Load Shutdown Flag" is set to "Enable" and the load voltage is lower than the value of this parameter, the load is automatically powered off. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202
EGPRS
Enumeration Type
IR(IR), LA(LA)
IR, LA
None None
IR
Cell
None
Not involved
Not involved
None
Radio
LSDF
BSC6900
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
LSDV
BSC6900
O&M of BTS
Interval Type 350~556 CLOSE(Close), PSDOWN(PS Downspeeding), AMRC(AMRC), CSPH(CS Preference TCHH), CSFHHO(CS TCHF-TCHH HO) EXCLUDE(exclud e list command), INCLUDE(include list command)
None
If "Power System Type" is "SC48200", the recommended value is "475". If "Power System Type" is "EPS4815", the value is "4294967295" (HEX: FFFFFFFF) and cannot be modified. For other Power System Type of APMU boards, the recommended value is "440". BTS
The value of this parameter must be smaller than "DC Undervoltage Alarm Threshold".
Not involved
Not involved
None
Equipme nt
LSRTRD
LDR Third
BSC6900
SET LDR(Optional)
LSTCMD
BSC6900
EXP LOG(Optional)
Enumeration Type
None None
None
If this parameter is not set to CLOSE, it value must not be the same as BSC69 "LDRSND", "LDRFST", Read & 00 or "LDRFOUH". Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
Enumeration Type
EXCLUDE, INCLUDE
None None
INCLUDE
RNC
None
Not involved
Not involved
None
Equipme nt
LstFormat
BSC6900
LT
Log Type
BSC6900
Query results can be CMP displayed TBLDATA(Optio vertically or MRFDnal) horizontally. 210301 GBFDSET 111203 LOGLIMIT(Mand Type of the MRFDatory) log 210305 GBFD111203 MRFD210305
Enumeration Type
Enumeration Type
HORIZONTAL(H ORIZONTAL), VERTICAL(VER HORIZONTAL, HORIZONTA TICAL) VERTICAL None L None OPTLOG(Operat ion Log), SECLOG(Securit y Log) OPTLOG, SECLOG None OPTLOG None OPTLOG(MML OPERATING LOG), SECLOG(SECU RITY LOG)
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
RNC
None
Not involved
Not involved
None
Equipme nt
LT
Log Type
BSC6900
LTCP
BSC6900
LTEMTHD
BSC6900
EXP Type of the LOG(Mandatory) log Temperature control threshold for low temperature. When the ambient temperature is less than "Low Temperature Critical Point", the temperature control system needs to control the temperature difference between the air inlet and air outlet, and that between the air inlet and ambient temperature. In multi-mode scenario, the value of this SET parameter in BTSDHEUBP(Op this mode GBFDtional) must be the 111202 Lower temperature threshold for the environment alarm box to report an alarm indicating that the ambient temperature is too low. If the ambient temperature of the BTS is lower than this threshold, the environment alarm box reports the alarm. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the SET correspondin BTSEXD(Option g parameter GBFDal) in another 111202 Lower voice quality threshold associated with the automatic adjustment of the AMR handover threshold. The value of this parameter must be smaller than or equal to SET the value of GCELLCCAMR( Long-term GBFDOptional) FER Target. 115506
Enumeration Type
OPTLOG
RNC
None
Not involved
Not involved
None
Equipme nt
O&M of BTS
-99~70
0 BTS
The value of this parameter must be smaller than "High Temperature Critical Point".
Not involved
Not involved
None
Equipme nt
O&M of BTS
-99~99
0 BTS
None
Not involved
Not involved
This paramete r must be less than The parameter modification "UTEMT has no impact on the HD". equipment. None
Equipme nt
LTFERLOW TH
BSC6900
2~255
None
2 Cell
The setting of this parameter must meet the following conditions: "LTFERLOWTH" < "LTFERTGT"; "LTFERLOWTH" < Read & "LTFERUPTH". Write
Not involved
Not involved
Generally , the value of this paramete r does not need adjustme nt. It is the lower limit for adjusting the value of LongTer The parameter modification mFERTa has no impact on the rget. equipment. None
Radio
6/9/2013
Page166of316
150682621.xls.ms_office
Security Level:
LTFERTGT
BSC6900
Target voice quality value associated with the automatic adjustment of the uplink SET threshold of GCELLCCAMR( AMR GBFDOptional) handover 115506
2~255
None
8 Cell
The setting of this parameter must meet the following conditions: "LTFERLOWTH" < "LTFERTGT"; "LTFERTGT" < Read & "LTFERUPTH". Write
Not involved
Not involved
The value of this paramete r decides whether the threshold is adjusted upwards or downwar ds. When the voice is in poor performa nce (excludin g the cause of poor channel quality: If the low rate mode is more used in the adaptatio n, you can The parameter modification increase has no impact on the the value equipment. None Generally , the value of this paramete r does not need adjustme nt. It is the upper limit for adjusting the value of LongTer mFERTa rget. Generally , the value of this paramete r is fixed to 2, with no need of adjustme nt. The value of this paramete r decides only the adjustme nt value or the adjusting frequenc y of the threshold . That is, the greater the value of this paramete r is, the more frequentl y the threshold
BSC6900 V900R011
Radio
BSC6900
Upper voice quality threshold associated with the automatic adjustment of SET the AMR GCELLCCAMR( handover GBFDOptional) threshold 115506
2~255
None
60
60 Cell
The setting of this parameter must meet the following conditions: "LTFERUPTH" > "LTFERTGT"; "LTFERUPTH" > Read & "LTFERLOWTH". Write
Not involved
Not involved
Radio
LTTHADJFA
BSC6900
Factor of threshold adjustment. It indicates the linear relation between the threshold adjustment SET value and the GCELLCCAMR( logarithmic GBFDOptional) FER. 115506
AMR Coding Rate Threshold Adaptive Adjustment Interval Type 2~255 14(1.4), 16(1.6), 20(2.0), 24(2.4), 28(2.8), 33(3.3), 88(8.8) 18(1.8), 22(2.2), 26(2.6), 30(3.0), 35(3.5), 41(4.1), 88(8.8)
2~255 15(1.5), 18(1.8), 22(2.2), 26(2.6), 30(3.0), 14, 15, 16, 18, 20, 36(3.6), 22, 24, 26, 28, 30, 33, 36, 88 20(2.0), 24(2.4), 28(2.8), 32(3.2), 38(3.8), 18, 20, 22, 24, 26, 45(4.5), 28, 30, 32, 35, 38, 41, 45, 88
None
2 Cell
None
Not involved
Not involved
BSC6900 V900R011
Radio
Lvl1Vswr
Lvl1 Vswr
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
None
20 None
BTS
None
Not involved
Not involved
None
Equipme nt
Lvl2Vswr
Lvl2 Vswr
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
None
30 None
BTS
None
Not involved
Not involved
None
Equipme nt
LVSDF
BSC6900
Whether "Shutdown Voltage" is valid. In multi-mode base station scenario, the value of this parameter in different modes must be the same for the same multi-mode GBFDbase station. 111202
O&M of BTS
Enumeration Type
None None
For APM4815, the recommended value is "NO". For other types of APMU boards, the recommended value is "YES".
BTS
None
Not involved
Not involved
None
Equipme nt
M3UASRVP N
BSC6900
MAC
MAC Address
BSC6900
MACODING MOD
BSC6900
MAIDX
MA Index
BSC6900
Number of the M3UA service listening port MAC address of the VLAN Coding mode in which an ARFCN is sent to an MS during an assignment or handover. If the parameter is set to CA_MA, an ARFCN is indicated through the CA and MA information contained in an assignment or handover command. If the parameter is set to Frequency_Li st, an ARFCN is indicated through the Frequency List SET information GCELLSOFT(O contained in ptional) an Identifies a maintenance group. Maintenance group: maintenance alliance (MA), which is a component of the maintenance domain (MD). Maintenance domain is an Ethernet or a component of an Ethernet in which the connectivity failure ADD management ETHMA(Mandat is performed. ory) The ADD maintenance ETHMEP(Manda domain is tory) uniformly PING managed by MAC(Mandatory one ISP. One ) MD can be TRC divided into MAC(Mandatory one or more ) maintenance SET SCTPSRVPORT (Optional) ADD XPUVLAN(Mand atory)
None MRFD210301
1024~65535
None None
None
SCTP link
The services are interrupted until the SCTP link is working normally.
0~8191
None None
None
None
None
Not involved
Not involved
The paramete r modificati on should be negotiate d with the peer end, and the BSC should be reset after the modificati on. It is recomme nded that this paramete r should not be modified when the The BSC should be reset to system is validate the parameter running. modification. None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
GBFD113701
Enumeration Type
CA_MA(CA+MA) , Frequency_List(F requency List), CA_MA, OPTIMIZED_CA Frequency_List, _MA(Optimized OPTIMIZED_CA_M CA+MA) A
None None
CA_MA
Cell
None
Not involved
Not involved
If there are fewer frequenci es in a frequenc y hopping group, the mode of Frequenc y List can decrease the length of an assignme nt or handover comman d to facilitate the access The parameter modification of an has no impact on the MS. equipment. None
Radio
GBFD118630
Ethernet OAM
0~499
None None
None
Board
None
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page167of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether to reduce the transmit power of the channels with the power derating function enabled in the nonBCCH SET timeslots of GCELLOTHEXT( the BCCH GBFDOptional) TRXs 111609 Whether to enable the power derating function over the nonBCCH SET timeslots of GCELLOTHEXT( the BCCH Optional) TRXs End time of the period in which the power in the non-BCCH timeslots of SET the BCCH GCELLOTHEXT( TRXs is Optional) derated Range of power derating in the nonBCCH SET timeslots of GCELLOTHEXT( the BCCH Optional) TRXs Start time of the period in which the power in the non-BCCH timeslots of SET the BCCH GCELLOTHEXT( TRXs is Optional) derated Bard code 1 of the ADD interface BTSESN(Mandat board of the ory) BTS Bar code 1 ADD of the BTS BTSAUTOPLAN( interface Mandatory) board
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111609
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111609
Compound Type
hour, min
00:00~23:59
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111609
0~15
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111609
Compound Type
hour, min
00:00~23:59
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
None
None
String Type
None
1~64 characters
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
GBFD118601
Abis over IP
String Type
None
1~64 characters
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MAINLOCG RPNO
BSC6900
Number of main location group. Each cell contains only one main location GBFDgroup. 510104 Number of the port to which the active OML of the BTS is MRFDconnected 210206
Multi-site Cell
0~35
None None
None
BTS
None
Not involved
Not involved
Not involved
Not involved
BSC6900 V900R011
Equipme nt
BSC6900
ADD BTS(Optional)
Tree Topology
0~1
None
0 BTS
None
BTS
None
Equipme nt
MainVer
Main version No. of the TMU board software. It SET is configured BTSAUTODLDA according to CTINFO(Mandat the actual GBFDory) situation. 111202 Mobile allocation index offset 1. Start frequency number, which is the number of the frequency where frequency hopping GBFDstarts 117002 Mobile allocation index offset 10. Start frequency number, which is the number of the frequency where frequency hopping GBFDstarts 117002 Mobile allocation index offset 11. Start frequency number, which is the number of the frequency where frequency hopping GBFDstarts 117002 Mobile allocation index offset 12. Start frequency number, which is the number of the frequency where frequency hopping GBFDstarts 117002 Mobile allocation index offset 2. Start frequency number, which is the number of the frequency where frequency hopping GBFDstarts 117002 Mobile allocation index offset 3. Start frequency number, which is the number of the frequency where frequency hopping GBFDstarts 117002 Mobile allocation index offset 4. Start frequency number, which is the number of the frequency where frequency hopping GBFDstarts 117002 Mobile allocation index offset 5. Start frequency number, which is the number of the frequency where frequency hopping GBFDstarts 117002 Mobile allocation index offset 6. Start frequency number, which is the number of the frequency where frequency hopping GBFDstarts 117002
O&M of BTS
0~9999
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MAIO1
MAIO 1
BSC6900
0~11
None None
None
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" is set to YES.
Not involved
Not involved
None
BSC6900 V900R011
Radio
MAIO10
MAIO 10
BSC6900
0~11
None None
None
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" is set to YES.
Not involved
Not involved
None
BSC6900 V900R011
Radio
MAIO11
MAIO 11
BSC6900
0~11
None None
None
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" is set to YES.
Not involved
Not involved
None
BSC6900 V900R011
Radio
MAIO12
MAIO 12
BSC6900
0~11
None None
None
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" is set to YES.
Not involved
Not involved
None
BSC6900 V900R011
Radio
MAIO2
MAIO 2
BSC6900
0~11
None None
None
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" is set to YES.
Not involved
Not involved
None
BSC6900 V900R011
Radio
MAIO3
MAIO 3
BSC6900
0~11
None None
None
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" is set to YES.
Not involved
Not involved
None
BSC6900 V900R011
Radio
MAIO4
MAIO 4
BSC6900
0~11
None None
None
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" is set to YES.
Not involved
Not involved
None
BSC6900 V900R011
Radio
MAIO5
MAIO 5
BSC6900
0~11
None None
None
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" is set to YES.
Not involved
Not involved
None
BSC6900 V900R011
Radio
MAIO6
MAIO 6
BSC6900
0~11
None None
None
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" is set to YES.
Not involved
Not involved
None
BSC6900 V900R011
Radio
6/9/2013
Page168of316
150682621.xls.ms_office
Security Level:
MAIO7
MAIO 7
BSC6900
Mobile allocation index offset 7. Start frequency number, which is the number of the frequency where frequency hopping GBFDstarts 117002 Mobile allocation index offset 8. Start frequency number, which is the number of the frequency where frequency hopping GBFDstarts 117002 Mobile allocation index offset 9. Start frequency number, which is the number of the frequency where frequency hopping GBFDstarts 117002
0~11
None None
None
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" is set to YES.
Not involved
Not involved
None
BSC6900 V900R011
Radio
MAIO8
MAIO 8
BSC6900
0~11
None None
None
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" is set to YES.
Not involved
Not involved
None
BSC6900 V900R011
Radio
MAIO9
MAIO 9
BSC6900
0~11
None None
None
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" is set to YES.
Not involved
Not involved
None
BSC6900 V900R011
Radio
MAJORALM UP0
BSC6900
Critical alarm threshold against excessive TMA feed current of feed tributary 0. When the actual current is greater than the specified value, a TMA SET feed current BTSDATUBP(Op critical alarm MRFDtional) is generated. 210304 Critical alarm threshold against excessive TMA feed current of feed tributary 1. When the actual current is greater than the specified value, the TMA feed SET current BTSDATUBP(Op critical alarm MRFDtional) is generated. 210304 Critical alarm threshold against excessive TMA feed current of feed tributary 2. When the actual current is greater than the specified value, the TMA feed SET current BTSDATUBP(Op critical alarm MRFDtional) is generated. 210304 Critical alarm threshold against excessive TMA feed current of feed tributary 3. When the actual current is greater than the specified value, the TMA feed SET current BTSDATUBP(Op critical alarm MRFDtional) is generated. 210304 Critical alarm threshold against excessive TMA feed current of feed tributary 4. When the actual current is greater than the specified value, the TMA feed SET current BTSDATUBP(Op critical alarm MRFDtional) is generated. 210304 Critical alarm threshold against excessive TMA feed current of feed tributary 5. When the actual current is greater than the specified value, the TMA feed SET current BTSDATUBP(Op critical alarm MRFDtional) is generated. 210304 ADD ETHMA(Mandat ory) PING BTSCFM(Manda tory) TRC BTSCFM(Manda Name of the tory) MA ADD BTSETHMA(Man datory) ADD BTSETHLCMEP( Mandatory) ADD Name of the BTSETHRMMEP maintenance (Mandatory) association.
Faulty Management
0~2000
mA
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MAJORALM UP1
BSC6900
Faulty Management
0~2000
mA
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MAJORALM UP2
BSC6900
Faulty Management
0~2000
mA
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MAJORALM UP3
BSC6900
Faulty Management
0~2000
mA
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MAJORALM UP4
BSC6900
Faulty Management
0~2000
mA
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MAJORALM UP5
BSC6900
Faulty Management
0~2000
mA
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MANAME
MA Name
BSC6900
GBFD118630
Ethernet OAM
String Type
None
1~20 characters
None None
None
Not involved
Not involved
Not involved
None
Transpor t
MANAME
MA Name
BSC6900
GBFD118630 MRFD210301
String Type
None
1~20 characters
None None
None
Not involved
Not involved
Not involved
Not involved
Transpor t
MASK
Subnet mask
BSC6900
ADD DEVIP(Mandator y) ADD ETHIP(Mandator y) ADD EMSIP(Mandato Subnet mask ry) of the board None GBFDADD Subnet mask 118611 PPPLNK(Mandat of the PPP GBFDory) link 118622 GBFDADD Subnet mask 118611 MPGRP(Mandat of the MP GBFDory) group 118622 Mask of the source IP network segment of ADD the packet ICMPGUARD(M against the andatory) ICMP attack
None Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
MASK
Subnet mask
BSC6900
IP Address Type
None
None
PPP link
None
Not involved
Not involved
Not involved
None
Transpor t
MASK
Subnet mask
BSC6900
IP Address Type
None
None
MP group
None
Not involved
Not involved
None
Transpor t
MASK
BSC6900
None
None
IP Address Type
None
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
MASK
Subnet mask
BSC6900
ADD IPRTBIND(Mand atory) ADD ETHTRKIP(Man datory) Subnet mask None ADD GCBSADDR(Ma ndatory) SET BTSETHPORT( Optional)
MASK
Mask
BSC6900
MASK
IP Mask
BSC6900
GBFD113601 GBFD118601
IP Address None Type Short Message Service Cell Broadcast IP Address (TS23) Type IP Address Type
None
None
Not involved
Not involved
Not involved
None
Transpor t
None
None
BSC69 00 None
Not involved
Not involved
None
Abis over IP
None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt
Radio
MASK
Subnet mask
BSC6900
ADD BTSPPPLNK(Ma ndatory) ADD BTSMPGRP(Ma Subnet mask GBFDndatory) of a PPP link 118611
IP Address Type
None
None
BTS
None
PPP link
None
None
Transpor t
6/9/2013
Page169of316
150682621.xls.ms_office
Security Level:
IP address of the main clock server. It must be a legal A/B/C type address but not a broadcast ADD address or BTSAUTOPLAN( network Mandatory) address. It must be the valid address of the A, B, or C type and cannot be the broadcast SET address or BTSIPCLKPARA network (Mandatory) address. Step of
GBFD118606
Clock over IP
IP Address Type
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
GBFD118606
Clock over IP
IP Address Type
None
None
BTS
The setting of this parameter cannot be duplicate with "Slave Clock Server IP Address".
Not involved
Not involved
None
Radio
MAXADJPC VAL
BSC6900
BSC6900
upward power adjustment according to SET the quality of GCELLPWR2(O the received GBFDptional) signals 110703 If the number of the association retransmissio ns exceeds this value, the parameter is deleted automatically . The value must be ADD greater than SCTPLNK(Optio Path max nal) retrans. None Maximum bandwidth for dynamic ADD adjustment at IPLOGICPORT( the logical Mandatory) port Number of consecutive intra-cell handovers allowed in a cell. When the interval between two intra-cell handovers is lower than a certain time threshold, these two intra-cell handovers are considered consecutive. When a certain number of intra-cell handovers occur consecutively , intra-cell handovers will be disallowed in the cell for a SET certain GCELLHOAD(O period of ptional) time. Maximum number of attempts to resend the SET downlink BSCPSSOFTPA assignment RA(Optional) messages. Number of attempts to SET re-establish BSCPSSOFTPA the downlink RA(Optional) TBF. Maximum degree by which the BTS can decrease the power of a TRX Maximum number of TRXs that can be configured for one cell. For the BTS3900B GSM, when the "Frequency and BSIC Plan Switch" is ON, the "Maximum TRX Number" (one or two, one by default) can be selected. For the BTS3900E GSM, when the "Capacity and Coverage Optimize Switch" is OFF, the "Maximum TRX Number" (one or two, Maximum number of TRXs that can be configured for one cell. For the BTS3900B GSM, when the "Frequency and BSIC Plan Switch" is ON, the "Maximum TRX Number" (one or two, one by default) can be selected. For the BTS3900E GSM, when the "Capacity and Coverage Optimize Switch" is OFF, the "Maximum TRX Number" (one or two,
0~32
dB
None
8 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, call drops may occur due to delayed power control; if this parameter is set to a The parameter modification greater value, the power control may be has no impact on the performed excessively, thus leading to Versions earlier than equipment. ping-pong power control. BSC6900 V900R011
Radio
None
0~254
None None
SCTP link
The value to be set should be larger than the value of "MAXPATHRETR" in Read & "ADD SCTPLNK". Write
Not involved
Not involved
The value should be greater than "MAXPA THRETR " in the comman d "ADD The parameter modification SCTPLN has no impact on the K". equipment. None
Transpor t
MAXBW
BSC6900
None
None
64~64000, step:64
kbit/s None
None
IP logical port
None
Not involved
Not involved
None
Transpor t
MAXCNTNU M
BSC6900
GBFD110601 GBFD510501
1~20
None None
3 Cell
None
Not involved
Not involved
None
If this parameter is set to a smaller value, call drops may occur or voice quality may be decreased due to delayed handover; if The parameter modification this parameter is set to a greater value, has no impact on the unnecessary handover may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
BSC6900
GBFD114101
GPRS
0~5
None None
2 BSC
None
Not involved
Not involved
None
Radio
BSC6900
GBFD114101
GPRS
0~5
None None
1 BSC
None
Not involved
Not involved
None
Radio
BSC6900
GBFD111605
0~20
dB
None
10 BTS
This parameter is valid only when "BAKPWRSAVMETHOD Read & " is set to BYPWR. Write
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD510702
1~2
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
GBFD510702
1~2
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
Maximum multiplexing frame length. This parameter indicates the GBFDMaximum 118604 ADD multiplexing GBFDIPMUX(Optional) frame length. 118610
24~1059
byte
1059
Not involved
Not involved
MAXLOADB TSNUM
BSC6900
Maximum number of BTSs that are allowed to concurrently SET download OTHSOFTPARA software GBFD(Optional) under a BSC 111202
O&M of BTS
50~200
None None
Not involved
Not involved
The adjacent node ID must be configure d. 1. In the earlier versions of BSC6000 V900R00 8C01B06 0SP06 and BSC6000 V900R00 86C01B0 60SP06, a maximum of 50 BTSs can be download ed simultane ously on one BSC through the M2000 client. In BSC6000 V900R00 8C01B06 0SP06 and BSC6000 V900R00
Transpor t
Equipme nt
6/9/2013
Page170of316
150682621.xls.ms_office
Security Level:
MAXMFLEN
MAXMFLEN
The value of this parameter cannot be less than the maximum PPPMUX subframe length (MUXMAXSF L). This parameter can be associated with the maximum segment length of the MP to control whether to segment the multiplexed MP. To enable the PPPMUX, the number of subframes must be more than or equal to 2. The following condition GBFDADD must be met: 118611 PPPLNK(Option wMuxMaxSfL GBFDal) <= ( 118622 The value of this parameter cannot be less than the maximum PPPMUX subframe length (MUXMAXSF L). This parameter can be associated with the maximum segment length of the MP to control whether to segment the multiplexed MP. To enable the PPPMUX, the number of subframes must be more than or equal to 2. The following condition GBFDADD must be met: 118611 MPGRP(Optiona wMuxMaxSfL GBFDl) <= ( 118622 Maximum number of SET retries when PWDPOLICY(O the user logs ptional) in Maximum SET capacity for ALMCAPACITY( storing the Optional) alarm log SET Maximum BTSDPMUBP(O output power ptional) of the diesel If the number of the path retransmissio ns exceeds this value, the parameter is deleted automatically . The value must be ADD smaller than SCTPLNK(Optio Association nal) max retrans.
1~1500
byte
256
None
PPP link
None
Transpor t
1~1500
byte
None
None
MP group
None
Not involved
Not involved
The value of this paramete r cannot be smaller than the maximum PPPMUX subframe length. The number subframe must be larger than 2 to enable the The parameter modification PPPMUX has no impact on the . equipment. None
Transpor t
MaxMissTim es
BSC6900
MRFD210305
Security Management
1~255
None None
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
maxnum
BSC6900
MRFD210304 GBFD111202
Faulty Management
None None
None
RNC
None
Not involved
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
BSC6900
O&M of BTS
None
125 BTS
None
Not involved
Not involved
None
MAXPATHR ETR
BSC6900
None
None
0~254
None None
SCTP link
The value to be set should be smaller than the value of "MAXASSOCRETR" in "ADD SCTPLNK".
Not involved
Not involved
The value should be smaller than "MAXAS SOCRET R" in the comman d "ADD The parameter modification SCTPLN has no impact on the K". equipment. None
Transpor t
MaxPbLinkC hkNum
Retransmissi on times of Pb link check (LapdCheck) messages. When a BSC sends a Pb link check message to an external PCU and fails to receive a response from the external PCU, it retransmits the message. This parameter indicates the maximum times for the PB link check SET message to OTHSOFTPARA be GBFD(Optional) transmitted. 114101 Maximum number of PDCHs that SET can be GTRXBASE(Opti assigned in onal) the TRX
GPRS
0~100
None None
This parameter is valid only when "TYPE" in BSC69 "SET BSCPCUTYPE" is 3 00 set to OUTER.
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD113101
0~8
None None
8 TRX
None
Not involved
Not involved
None
Radio
BSC6900
Maximum value of the PDCH ratio in a cell. The number of available TCHs and PDCHs in a cell is set to a fixed value. The PDCH ratio is: available PDCH/(TCH/ F + static PDCH). This parameter is used to restrict the GBFDPDCH ratio. 113101
0~100
per cent
None
30 Cell
None
Not involved
Not involved
None
Radio
BSC6900
BSC6900
Maximum number of attempts to SET resend the BSCPSSOFTPA polling RA(Optional) messages. Maximum current coefficient when the battery is charged. When the battery is charged, the maximum current can be 0.01 to 0.99 times of the capacity of the battery cabinet. That is, the charge coefficient is 0.01-0.99. For example, if the capacity of the battery cabinet is 200 A and the charge coefficient is 0.15, the maximum charge current for SET the battery BTSPMUBP(Opti cabinet is 30 onal) A.
GBFD114101
GPRS
GBFD111202
O&M of BTS
Interval Type 0~5 1C(0.01C), 2C(0.02C), 3C(0.03C), 4C(0.04C), 5C(0.05C), 6C(0.06C), 7C(0.07C), 8C(0.08C), 9C(0.09C), 10C(0.10C), 11C(0.11C), 12C(0.12C), 13C(0.13C), 14C(0.14C), 15C(0.15C), 16C(0.16C), 17C(0.17C), 18C(0.18C), 19C(0.19C), 20C(0.20C), 21C(0.21C), 22C(0.22C), 23C(0.23C), 24C(0.24C), 25C(0.25C), 26C(0.26C), 27C(0.27C), 28C(0.28C), 29C(0.29C), 30C(0.30C), 31C(0.31C), 32C(0.32C), Enumeration 33C(0.33C), Type 34C(0.34C),
0~5
None None
5 BSC
None
Not involved
Not involved
None
Radio
1C, 2C, 3C, 4C, 5C, 6C, 7C, 8C, 9C, 10C, 11C, 12C, 13C, 14C, 15C, 16C, 17C, 18C, 19C, 20C, 21C, 22C, 23C, 24C, 25C, 26C, 27C, 28C, 29C, 30C, 31C, 32C, 33C, 34C, 35C, 36C, 37C, 38C, 39C, 40C, 41C, 42C, 43C, 44C, 45C, 46C, 47C, 48C, 49C, 50C, 51C, 52C, 53C, 54C, 55C, 56C, 57C, 58C, 59C, 60C, 61C, 62C, 63C, 64C, 65C, 66C, 67C, 68C, 69C, 70C, 71C, 72C, 73C, 74C, 75C, 76C, 77C, 78C, 79C, 80C, 81C, 82C, 83C, 84C, 85C, 86C, 87C, 88C, 89C, 90C, 91C, 92C, 93C, 94C, 95C, 96C, 97C, 98C, 99C None
15 None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page171of316
150682621.xls.ms_office
Security Level:
MAXRESEN D
Maximum current coefficient when the battery is charged. When the battery is charged, the maximum current can be 0.05 to 0.25 times of the capacity of the battery cabinet. That is, the charge coefficient is 0.05-0.25. For example, if the capacity of the battery cabinet is 200 A and the charge coefficient is 0.15, the maximum charge current for SET the battery BTSDPMUBP(O cabinet is 30 ptional) A. Maximum times for a Physical Information message to be transmitted. When the retransmissio n times exceeds this parameter and the BTS still cannot receive any correct SAMB frame from the MS, the BTS sends a connection failure message (including the handover failure information) to the BSC, which releases the assigned SET channel and GCELLHOAD(O stops timer ptional) T3105 after
GBFD111202
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
GBFD110601 GBFD510501
1~255
None None
30 Cell
None
Not involved
Not involved
None You can increase this value when the handover s are slow or the handover success ratio is low due to bad clock or transmiss ion quality. For the handover s of an MS to succeed, the following condition must be met: "Physical informati on MAX Retrans" x "Radio link invalid
Equipme nt
Radio
MAXRETRA NS1
Maximum retransmissio n for radio priority 1. The 2bit Radio Priority message carried by the MS in the Packet Channel Request message has four levels of priorities. Level 1 is the highest priority, and level 4 is the lowest GBFDpriority. 119110 Maximum retransmissio n for radio priority 2. The 2bit Radio Priority message carried by the MS in the Packet Channel Request message has four levels of priorities. Level 1 is the highest priority, and level 4 is the lowest GBFDpriority. 119110 Maximum retransmissio n for radio priority 3. The 2bit Radio Priority message carried by the MS in the Packet Channel Request message has four levels of priorities. Level 1 is the highest priority, and level 4 is the lowest GBFDpriority. 119110 Maximum retransmissio n for radio priority 4. The 2bit Radio Priority message carried by the MS in the Packet Channel Request message has four levels of priorities. Level 1 is the highest priority, and level 4 is the lowest GBFDpriority. 119110 Maximum PPPMUX subframe length. If the PPP frame length is larger than this value, the PPPMUX multiplexing is performed. The value of this parameter cannot be larger than the maximum multiplexed frame length wMuxMfl. To enable the PPPMUX, the number of subframes must be more than or equal to 2. The following condition must be met: wMuxMaxSfL GBFD<= ( 118611 wMuxMfl-8 GBFD)/2 118622
Access
Enumeration Type
1_Times(1_Time s), 2_Times(2_Time s), 4_Times(4_Time s), 7_Times(7_Time 1_Times, 2_Times, s) 4_Times, 7_Times
None None
7_Times
Cell
None
Not involved
Not involved
None
Radio
MAXRETRA NS2
Access
Enumeration Type
1_Times(1_Time s), 2_Times(2_Time s), 4_Times(4_Time s), 7_Times(7_Time 1_Times, 2_Times, s) 4_Times, 7_Times
None None
7_Times
Cell
None
Not involved
Not involved
None
Radio
MAXRETRA NS3
Access
Enumeration Type
1_Times(1_Time s), 2_Times(2_Time s), 4_Times(4_Time s), 7_Times(7_Time 1_Times, 2_Times, s) 4_Times, 7_Times
None None
7_Times
Cell
None
Not involved
Not involved
None
Radio
MAXRETRA NS4
Access
Enumeration Type
1_Times(1_Time s), 2_Times(2_Time s), 4_Times(4_Time s), 7_Times(7_Time 1_Times, 2_Times, s) 4_Times, 7_Times
None None
7_Times
Cell
None
Not involved
Not involved
None
Radio
MAXSFLEN
1~746
byte
64
PPP 64 link
None
PPP link
None
Transpor t
6/9/2013
Page172of316
150682621.xls.ms_office
Security Level:
MAXSFLEN
ADD MPGRP(Optiona l)
MAXSTEP0
BSC6900
MAXSTEP1
BSC6900
MAXSTEP2
BSC6900
Maximum PPPMUX subframe length. If the PPP frame length is larger than this value, the PPPMUX multiplexing is performed. The value of this parameter cannot be larger than the maximum multiplexed frame length wMuxMfl. To enable the PPPMUX, the number of subframes must be more than or equal to 2. The following condition must be met: GBFDwMuxMaxSfL 118611 <=( wMuxMfl- GBFD8 )/2 118622 Huawei power control algorithm II divides three quality zones according to the quality of the receive signals. When the power is downwardly adjusted according to the level, the maximum downward adjustment step can vary according to the quality of the received signals. This parameter specifies the maximum step of downward power adjustment when the quality of the GBFDreceived 110703 Huawei power control algorithm II divides three quality zones according to the quality of the receive signals. When the power is downwardly adjusted according to the level, the maximum downward adjustment step can vary according to the quality of the received signals. This parameter specifies the maximum step of downward power adjustment when the quality of the GBFDreceived 110703 Huawei power control algorithm II divides three quality zones according to the quality of the receive signals. When the power is downwardly adjusted according to the level, the maximum downward adjustment step can vary according to the quality of the received signals. This parameter specifies the maximum step of downward power adjustment when the quality of the GBFDreceived 110703
1~746
byte
None
None
MP group
None
Not involved
Not involved
If the PPP frame length is larger than this value, PPPMUX multiplexi ng cannot be performe d. The value of this paramete r cannot be larger than the maximum multiplexi ng frame length wMuxMfl and the number subframe must be larger than 2 as The parameter modification the has no impact on the enabling equipment. None
Transpor t
0~30
dB
None
2 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, the algorithm cannot realize fast power control. If this parameter is set to a greater value, the power control may be The parameter modification performed excessively, thus leading to has no impact on the poor quality, low level, and ping-pong Versions earlier than equipment. power control.. BSC6900 V900R011
Radio
0~30
dB
None
0 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, the algorithm cannot realize fast power control. If this parameter is set to a greater value, the power control may be The parameter modification performed excessively, thus leading to has no impact on the poor quality, low level, and ping-pong Versions earlier than equipment. power control.. BSC6900 V900R011
Radio
0~30
dB
None
0 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, the algorithm cannot realize fast power control. If this parameter is set to a greater value, the power control may be The parameter modification performed excessively, thus leading to has no impact on the poor quality, low level, and ping-pong Versions earlier than equipment. power control.. BSC6900 V900R011
Radio
MAXTA
Max TA
BSC6900
Maximum time advance (TA). The value of this parameter is related to that of "Cell Extension Type" in the SET "ADD GCELLBASICPA GCELL" GBFDRA(Optional) command. 110901 Number of measurement reports (MRs) used for averaging the time advance before the GBFDcall drops 111004 Whether to initiate a forcible call drop when the time advance exceeds "MAX TA Drop Call Threshold"
0~255
None None
None
Cell
None
Not involved
Not involved
If this paramete r is set to a smaller value, the handover success rate may The parameter modification be has no impact on the affected. equipment. None
Radio
0~31
None None
20 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD111004
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
None
Radio
Whether the time advance after filtering exceeds the threshold. If the threshold is exceeded, a forcible call drop is GBFDinitiated. 111004 Maximum
0~255
None None
255 Cell
None
Not involved
Not involved
None
If this parameter is set to a smaller value, The parameter modification the call drop rate may increase; if this has no impact on the parameter is set to a greater value, the Versions earlier than equipment. speech quality may be affected. BSC6900 V900R011
Radio
BSC6900
number of (16 kbit/s) Abis timeslots that SET the PDCHs GTRXBASE(Opti can use in GBFDonal) the TRX 117301 Maximum TTL value of TRC the sent IPADDR(Optiona TRACERT l) packet Step of
Flex Abis
0~32
None None
32 TRX
None
Not involved
Not involved
None
Equipme nt
MAXTTL
MAX TTL
BSC6900
None
None
2~255
None
16
16 None
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
upward power adjustment according to SET the quality of GCELLPWR2(O the received GBFDptional) signals 110703 Detection index. The index is a unique value ADD ranging from IPRTBIND(Mand 0 to 31 if it is GBFDatory) not specified. 118609 Local IP STR address for IPCHK(Mandator multi-hop y) BFD
0~32
dB
None
8 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, call drops may occur due to delayed power control; if this parameter is set to a The parameter modification greater value, the power control may be has no impact on the performed excessively, thus leading to Versions earlier than equipment. ping-pong power control. BSC6900 V900R011
Radio
MBFDCHKN
BSC6900
0~511
None None
None
None
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
MBFDLOCA LIP
BSC6900
GBFD118609
IP Address Type
None
None
None
None
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page173of316
150682621.xls.ms_office
Security Level:
BSC6900
WCDMA MBMS general common channel ADD service TRMFACTOR(O downlink ptional) factor
None
None
0~100
per cent
100
Not involved
Not involved
MBR
Multi-band report
BSC6900
Used for requesting the MS to report the measurement information of neighboring cells in multiple frequency bands. This parameter is carried in the system information 2ter and GBFD5ter. 114401
0~3
None None
If the traffic volume on each frequency band is even and there is no special requirements for the frequency band, the recommended value is 0; if the traffic volume on each frequency band is significantly uneven and a frequency band is preferred for an MS, the recommended value is 3; if traffic volume on each frequency band is not extremely uneven, the recommended value is 1 or 2. For details, see the GSM Rec. 05. 08. Cell
None
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h The parameter modification modificati has no impact on the on of the equipment. None In a multi-band network, this parameter can be set on the basis of the traffic volume on each frequency band. If this parameter is set to 0, the MS reports the measurement results of six neighboring cells known and permitted by the NCC at the bands with the best signal regardless of the band at which the neighboring cell is located. If this parameter is set to 1, the MS reports the measurement result of a neighboring cell known and permitted by the NCC at each band with the best signal (the band serving the current cell not included). The MS reports the measurement result of the neighboring cell at the band serving the current cell in the redundant position. If the redundant position is still available, the MS reports the measurement results of other neighboring cells regardless of the bands at which the neighboring cells are located. If this parameter is set to 2, the MS reports the measurement results of two neighboring cell known and permitted by the NCC at each band with the best signal (the band serving the current cell not included). The MS reports the measurement result of the neighbor cell at the band serving the current cell in the redundant position. If the redundant The parameter modification position is still available, the MS reports has no impact on the the measurement results of other None equipment. neighboring cells regardless of the bands
Transpor t
Radio
BSC6900
For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. This parameter indicates the number of enhanced measurement reports received on a signaling channel used to measure SET the GCELLHOFITPE MEAN_BEP GBFDN(Optional) value. 117501 For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. This parameter indicates the number of enhanced measurement reports received on a voice channel used to SET measure the GCELLHOFITPE MEAN_BEP GBFDN(Optional) value. 117501 Number of the BTS. The BTS is COL numbered SYNCINFO(Man uniquely in a GBFDdatory) BSC. 118201 Name of the BTS. The BTS is COL named SYNCINFO(Man uniquely in a datory) BSC. ADD GCNOPERATO R(Mandatory) ADD GCELL(Mandato ry) ADD GEXT2GCELL( Mandatory) ADD GEXT3GCELL( Mandatory) Mobile SET country code. FHO(Mandatory) This ADD parameter GCELLQUICKS identifies the ETUP(Mandator country y) where a ADD mobile BTSAUTOPLAN( subscriber is Mandatory) located, for SET example, the BTSAUTOPLAN Chinese CFG(Optional) MCC is 460.
ms
None
2 Cell
This parameter is valid only when "MEASURETYPE" in "SET GCELLCCUTRANSYS" is set to EnhMeasReport.
Not involved
Not involved
None
Radio
ms
None
6 Cell
This parameter is valid only when "MEASURETYPE" in "SET GCELLCCUTRANSYS" is set to EnhMeasReport.
Not involved
Not involved
None
Radio
MBTSID
SoftSynchronized Network
0~2047
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
GBFD118201
SoftSynchronized Network
String Type
None
1~64 characters
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
MCC
MCC
BSC6900
MRFD210301
Configuration Management
String Type
None
3 digit
None None
None
Cell
None
Not involved
Not involved
None
Radio
MCC1
Cell MCC
BSC6900
Local mobile country code (MCC). It is used to identify the country that the mobile subscriber belongs to. SET For example, BTSAUTOPLAN the MCC of GBFDCFG(Optional) China is 460. 510702 MC priority number. This parameter is valid when the MP group type is MC.4(Use two bytes to present MC priority number, 4 classes), 8(Use four bytes to present MC GBFDADD priority 118611 MPGRP(Optiona number, 8 GBFDl) classes) 118622
String Type
None
1~3 characters
None None
None
Cell
None
Not involved
Not involved
None
Radio
MCCLASS
MC PRI number
BSC6900
4, 8 4(Use two bytes to present MC priority number, 4 classes), 8(Use four bytes to present MC priority number, 8 classes)
None None
MP 8 group
None
Not involved
Not involved
None
Transpor t
MCCLASS
MC PRI number
BSC6900
ADD BTSMPGRP(Opt MC priority ional) number. ADD NCELL(Mandato ry) COL SYNCINFO(Man datory) Number of the cell. The cell is numbered uniquely in a BSC.
GBFD118611
None None
8 BTS
This parameter is required when "MLPPP type" is set to "MCPPP" with the "ADD MPGRP".
PPP link
None
None
Transpor t
MCELLID
BSC6900
MRFD210301
Configuration Management
0~2047
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
MCELLNAM E
GBFD111202
O&M of BTS
String Type
None
1~64 characters
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
6/9/2013
Page174of316
150682621.xls.ms_office
Security Level:
MCN
BSC6900
SET BTSFMUABP(O ptional) SET BTSAPMUBP(O ptional) SET BTSDATUBP(Op tional) SET BTSDEMUBP(O ptional) SET BTSDHEUBP(Op tional) SET BTSPSUFP(Opti onal) ADD ETHMD(Mandat ory) ADD ETHMA(Mandat ory)
MCSTANDA RD
BSC6900
Cabinet No. of the management board. The management board refers to the TMU or RXU that directly communicate s with the board. The configuration of this parameter must be consistent with the actual physical connection. Otherwise, the board may not work GBFDproperly. 111202 Standard for the GSM multi-carrier GBFDBTS 111202
O&M of BTS
O&M of BTS
Interval Type 0~62 CLASS0(Class0) 0~62 , CLASS1(Class1) Enumeration , CLASS0, CLASS1, Type CLASS2(Class2) CLASS2
None None
None
BTS
"BTSTYPE" identifies the value range of this parameter. The number of cabinets supported by the BTS depends on the type of the BTS. For details, see the parameter description of Read & the command. Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Equipme nt
None CLASS0
None
BTS
None
Not involved
Not involved
None
Equipme nt
MDIDX
MD INDEX
BSC6900
Ethernet OAM
0~7
None None
None
Board
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
MDLEVEL
MD LEVEL
BSC6900
ADD Level of the BTSETHMD(Opti maintenance onal) domain. ADD ETHMD(Mandat ory) PING BTSCFM(Manda tory) TRC BTSCFM(Manda name of the tory) MD ADD BTSETHMD(Ma ndatory) ADD BTSETHMA(Man datory) ADD BTSETHLCMEP( Mandatory) ADD Name of the BTSETHRMMEP maintenance (Mandatory) domain.
0~7
None None
None
Not involved
Not involved
Not involved
Not involved
Transpor t
MDName
MD NAME
BSC6900
GBFD118630
Ethernet OAM
String Type
None
1~20 characters
None None
None
Not involved
Not involved
Not involved
None
Transpor t
MDNAME
MD NAME
BSC6900
GBFD118630 MRFD210301
String Type
None
1~20 characters
None None
None
Not involved
Not involved
Not involved
Not involved
Transpor t
BSC6900
BSC6900
Whether to allow the MS to the send the PS SET measurement GCELLPSI1(Opt report to the GBFDional) network side. 119102 ADD Common GNRNC(Mandat measurement MRFDory) period. 211402
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
{1~5}
3 None
BSC
Read & None Write Set when Allow Common Measurement at Iur-g is Read & set to Yes Write
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
BSC6900 V900R011
Radio
MEASURET YPE
BSC6900
Type of the measurement SET report (MR) GCELLCCUTRA reported by GBFDNSYS(Optional) the MS 117501 Identifies a maintenance point in the maintenance alliance A maintenance ADD point is an ETHMEP(Manda edge node of GBFDtory) the MA. 118630 ADD BTSETHLCMEP( Mandatory) ADD BTSETHRMMEP (Mandatory) Identifies a maintenance end point (MEP) of a maintenance association.
Enumeration Type
EnhMeasReport( Enhanced Measurement Report), ComMeasReport (Common Measurement EnhMeasReport, Report) ComMeasReport
None None
None
Cell
None
Not involved
Not involved
The Enhance d Measure ment Report supports the measure ment of 3G neighbori ng cells to implemen t the interoper ability between the 2G system and 3G system, and thus ensures the service The parameter modification continuity has no impact on the . equipment. None
Radio
MEPID
MEP ID
BSC6900
Ethernet OAM
1~1000
None None
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
MEPID
MEP ID
BSC6900
GBFD118630 MRFD210301
1~400
None None
None
Not involved
Not involved
Not involved
Not involved
Transpor t
MEPTYPE
MEP Type
BSC6900
MHF
BSC6900
MHF
BSC6900
The type of the maintenance point added to the maintenance group. LocalMep indicates a local maintenance point and RemoteMep indicates a ADD remote ETHMEP(Manda maintenance tory) point. MP/MC ADD sequence MPGRP(Optiona header l) option ADD Head option BTSMPGRP(Opt of an MP/MC ional) list Minimum receiving level for a candidate SET cell during GCELLNC2PAR cell A(Optional) reselection.
Ethernet OAM Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1
Enumeration Type
LocalMep, RemoteMep
None None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The transport path should be re-established after the parameter modification. None
Transpor t
None LONG
LONG
MP group
None
Not involved
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
LONG, SHORT
LONG, SHORT
None LONG
LONG
BTS
None
PPP link
None
BSC6900
GBFD116201
0~63
dB
None
None
Cell
None
Not involved
Not involved
None
Radio
MINBW
BSC6900
BSC6900
Minimum bandwidth for dynamic ADD adjustment at IPLOGICPORT( the logical Mandatory) port None Selects 3G candidate cells. If the measured value of a 3G neighboring cell is lower than this threshold, the 3G neighboring cell will be removed from among ADD the 3G GEXT3GCELL( candidate GBFDOptional) cells. 114301
None
64~64000, step:64
kbit/s None
None
IP logical port
None
Not involved
Not involved
None
Transpor t
GSM/WCDMA Interoperability
0~49
dB
None
10 Cell
BSC6900
GBFD110601 GBFD510501
0~63
dB
None
0 Cell
Read & None Write This parameter is based on "HOCDCMINDWPWR" and "HOCDCMINUPPWR". Different offset can be set for different neighboring cells. The following condition must be met for a neighboring cell to be added into the candidate cell queue: Neighboring cell uplink level >= ("HOCDCMINUPPWR" + "MINOFFSET"); Neighboring cell downlink level >= ("HOCDCMINDWPWR" Read & + "MINOFFSET"). Write
Not involved
Not involved
None
This parameter is used to limit the number of candidate cells for handovers. If this parameter is set to a greater value, some desired cells may be excluded from the candidate cells, thus leading to call drops. If this parameter is set to a smaller value, The parameter modification an unwanted cell may become a has no impact on the candidate cell, thus leading to handover Versions earlier than equipment. failures. BSC6900 V900R011
Radio
Not involved
Not involved
None
Radio
6/9/2013
Page175of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
MINORALM UP0
BSC6900
MINORALM UP1
BSC6900
MINORALM UP2
BSC6900
MINORALM UP3
BSC6900
MINORALM UP4
BSC6900
MINORALM UP5
BSC6900
MinorClrThd A
BSC6900
MinorClrThd B
BSC6900
Threshold for triggering prompt alarm clearance when the ANT_A tributary antenna current is too heavy. When the actual current is higher than the configured value, the ALD Current Prompt Alarm clearance is triggered. Threshold for triggering prompt alarm clearance when the ANT_B tributary antenna current is too heavy. When the actual current is higher than the configured value, the ALD Current Prompt Alarm clearance is triggered. Warning alarm threshold against excessive TMA feed current of feed tributary 0. When the actual current is greater than the specified value, a TMA feed current warning alarm is generated. Warning alarm threshold against excessive TMA feed current of feed tributary 1. When the actual current is greater than the specified value, the TMA feed current warning alarm is generated. Warning alarm threshold against excessive TMA feed current of feed tributary 2. When the actual current is greater than the specified value, the TMA feed current warning alarm is generated. Warning alarm threshold against excessive TMA feed current of feed tributary 3. When the actual current is greater than the specified value, the TMA feed current warning alarm is generated. Warning alarm threshold against excessive TMA feed current of feed tributary 4. When the actual current is greater than the specified value, the TMA feed current warning alarm is generated. Warning alarm threshold against excessive TMA feed current of feed tributary 5. When the actual current is greater than the specified value, the TMA feed current warning alarm is generated. Threshold for triggering prompt alarm clearance when the ANT_A tributary antenna current is too heavy. When the actual current is lower than the configured value, the ALD Current Prompt Alarm clearance is triggered. Threshold for triggering prompt alarm clearance when the ANT_B tributary antenna current is too heavy. When the actual current is lower than the configured value, the ALD Current Prompt Alarm clearance is triggered.
MRFD210304
Faulty Management
10~3500
mA
170 None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
10~3500
mA
170 None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
0~2000
mA
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
0~2000
mA
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
0~2000
mA
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
0~2000
mA
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
0~2000
mA
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
0~2000
mA
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
10~3500
mA
140 None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
10~3500
mA
140 None
BTS
None
Not involved
Not involved
None
Equipme nt
In a direct retry, when the receive level of a neighboring cell is no smaller than this parameter, the neighboring cell can be a SET candidate GCELLHOCTRL cell for the GBFD(Optional) direct retry. 110607
Direct Retry
0~63
dB
None
16 Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM1. Write
Not involved
Not involved
None
Radio
6/9/2013
Page176of316
150682621.xls.ms_office
Security Level:
MINRESTIM ETCH
BSC6900
BSC6900
Minimum time required for a TCH to transform to a SDCCH and then SET transform GCELLCHMGBA back to a SIC(Optional) TCH Selects 3G candidate cells. If the measured value of a 3G neighboring cell is lower than this threshold, the 3G neighboring cell will be removed from among ADD the 3G GEXT3GCELL( candidate Optional) cells.
GBFD113001
60~3600
None
60 Cell
This parameter is valid only when "SDDYN" in "SET GCELLBASICPARA" is set to YES.
Not involved
Not involved
None
If this parameter is set to a smaller value, the idle state of the current SDCCHs cannot be indicated correctly and consequently the rollback of SDCCHs immediately triggers adjustment and affects the access success rate. If this parameter is set to a larger value, the channel allocation algorithm becomes less sensitive and consequently the The parameter modification SDCCHs stay in idle state and cannot be has no impact on the rolled back for a long period of time, thus Versions earlier than equipment. affecting the TCH traffic volume. BSC6900 V900R011
Radio
GBFD114301 GBFD114302
0~63
dB
None
10 Cell
A 3G cell can be added into the candidate cell queue when the following conditions are met: "INTERRATOUTBSCHO EN" is set to YES; "BET3GHOEN" is set to YES; the RSCP of the 3G cell for a period of time is greater than the sum of "HORSCPTH3G" Read & and "RSCPOFF". Write
Not involved
Not involved
None
If this parameter is set to a greater value, some desired cells may be excluded from the candidate cells, thus leading to call drops. If this parameter is set to a smaller value, The parameter modification an unwanted cell may become a has no impact on the candidate cell, thus leading to handover Versions earlier than equipment. failures. BSC6900 V900R011
Radio
MINRXINT
Minimum interval between STR received BFD GBFDIPCHK(Optional) packets 118609 Minimum interval at which the BTS receives GBFDBFD packets 118609
10~1000
ms
30
Not involved
Not involved
Not involved
None
Transpor t
MINRXINTE RVAL
Minimum RX Interval
BSC6900
10~1000
ms
100
Not involved
Not involved
MINTXINT
Minimum interval STR between sent GBFDIPCHK(Optional) BFD packets 118609 Minimum interval at which the BTS sends GBFDBFD packets 118609
10~1000
ms
30
Not involved
Not involved
None To modify this paramete r, run "STP GATEW AYCHK" first and then "STR The parameter modification GATEW has no impact on the AYCHK". equipment. None
Transpor t
Transpor t
BSC6900
10~1000
ms
100
Not involved
Not involved
None
Transpor t
MIRRORDP N
BSC6900
None
0~11
None None
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
MIRRORSP N
STR Mirror ETHMIRRORPO Ethernet port RT(Mandatory) number None STR ETHMIRRORPO RT(Mandatory) ADD GCNOPERATO R(Mandatory) ADD GCELL(Mandato ry) ADD GEXT2GCELL( Mandatory) ADD GEXT3GCELL( Mandatory) SET FHO(Mandatory) ADD GCELLQUICKS ETUP(Mandator y) ADD BTSAUTOPLAN( Mandatory) SET BTSAUTOPLAN CFG(Optional)
None
MIRRORTY PE
Mirror Type
BSC6900
Mirror type
None
None
Interval Type 0~11 0~11 UP(upstream mirror), Enumeration DOWN(downstre Type am mirror) UP, DOWN
None None
None
Not involved
Not involved
Not involved
None
Transpor t
None None
None
Not involved
Not involved
None
Transpor t
MNC
MNC
BSC6900
Mobile network code. This parameter identifies the public land mobile network (PLMN) where a mobile subscriber is homed.
MRFD210301
Configuration Management
String Type
None
2~3 digit
None None
None
Cell
None
Not involved
Not involved
None
Radio
MNC1
Cell MNC
BSC6900
MODE
BSC6900
Mobile network code (MNC). It is used to identify the PLMN that SET the mobile BTSAUTOPLAN subscriber CFG(Optional) belongs to. Usage threshold of the CPU for calling access. If the usage of the CPU exceeds the threshold, the calling access request is transferred SET to other CPU BSCFCPARA(O for ptional) processing. Working mode of the system clock. Working modes of the system clock are as follows: (1) MANUAL: In this mode, you must specify a clock source and prevent the switching of the clock source. (2) AUTO: In this mode, you do not need to specify a clock source and the system automatically selects the clock source with the highest SET priority. CLKMODE(Man (3) FREE: In datory) this mode,
GBFD510702
String Type
None
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
Radio
GBFD111705
50~95
per cent
None
BSC69 80 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
MRFD210502
BSC/RNC Clock
Enumeration Type
None None
AUTO
BSC69 00 None
Not involved
Not involved
MODE
BSC6900
MODE
Configure Mode
BSC6900
SCTP link work mode. Server mode: BSC starts the listening and waits for the peer to sending the SCTP-INIT message. Client mode: BSC actively ADD sends the SCTPLNK(Mand SCTP-INIT atory) message. None SET QUICKCFG(Man configuration MRFDdatory) mode. 210301 SWP MBSCMODE(M andatory) CHK Working MODEDATA(Ma mode after ndatory) switchover
None None
None
SCTP link
None
SCTP link
The services are interrupted until the SCTP link is working normally.
OFF, ON
OFF, ON
None None
OFF
BSC69 00 None
Not involved
Not involved
Not involved
The parameter modification has no impact on the None equipment. None The local end of the SCTP link is the server and the applicatio n type is NBAP, the working mode should not be modified as the client. For the SCTP link of the M3UA applicatio n, the working mode can be modified only when the upper layer The parameter modification applicatio has no impact on the n is equipment. None The parameter modification has no impact on the None equipment. None
Equipme nt
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Equipme nt
MODE
BSC6900
MRFD210301
Configuration Management
Enumeration Type
GO(GSM), UO(UMTS), GU(GSM and UMTS) MODE1(1:1 Protection Switching), MODE2(1+1 Unidirectional Protection Switching), MODE3(1+1 Bidirectional Protection Switching)
GO, UO, GU
None None
None
BSC69 00 None
Not involved
Not involved
None
Radio
MODE
Backup mode
BSC6900
SET MSP(Optional)
GBFD111701
Board Switchover
Enumeration Type
None None
None
BSC6900
The setting of this paramete r must be negotiate d with that on the If the mode is not interconn The parameter modification consistent, will interrupt ected has no impact on the service until it is consistent. side. equipment. None
Transpor t
6/9/2013
Page177of316
150682621.xls.ms_office
Security Level:
MODE
Check mode
BSC6900
STR IPCHK(Optional)
MODE0
BSC6900
MODE1
BSC6900
MODE2
BSC6900
MODE3
BSC6900
MODE4
BSC6900
Port working mode. When this parameter is set to CHECK_ON_ STANDBY_P ORT, it indicates that the connectivity check is performed on the standby port. When this parameter is set to CHECK_ON_ INDEPENDE NT_PORT, it indicates that the connectivity check is performed on the independent port. When this parameter is set to CHECK_ON_ PRIMARY_P Alarm mode of feed tributary 0. There are three alarm modes. Alarm mode 1 has only one type of alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 2 has two types of alarms: warning alarms and critical alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 3 has two types of alarms: Alarm mode of feed tributary 1. There are three alarm modes. Alarm mode 1 has only one type of alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 2 has two types of alarms: warning alarms and critical alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 3 has two types of alarms: Alarm mode of feed tributary 2. There are three alarm modes. Alarm mode 1 has only one type of alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 2 has two types of alarms: warning alarms and critical alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 3 has two types of alarms: Alarm mode of feed tributary 3. There are three alarm modes. Alarm mode 1 has only one type of alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 2 has two types of alarms: warning alarms and critical alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 3 has two types of alarms: Alarm mode of feed tributary 4. There are three alarm modes. Alarm mode 1 has only one type of alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 2 has two types of alarms: warning alarms and critical alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 3 has two types of alarms:
GBFD118609
Enumeration Type
None
None
None
Not involved
Not involved
Not involved
None
Transpor t
MRFD210304
Faulty Management
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page178of316
150682621.xls.ms_office
Security Level:
MODE5
BSC6900
Alarm mode of feed tributary 5. There are three alarm modes. Alarm mode 1 has only one type of alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 2 has two types of alarms: warning alarms and critical alarms. The alarm current is fixed and greater than the normal working current. Alarm mode SET 3 has two BTSDATUBP(Op types of MRFDtional) alarms: 210304
Faulty Management
Enumeration Type
MODE1(Mode1), MODE1, MODE2(Mode2), MODE2, MODE3(Mode3) MODE3 moniter~1 host_gate~2 ems_gate~3 authority~4 configure~5 maintain~6 stat~7 alarm~8 software~9 ftp_server~10 sntp~11 btsom~12 ems_agent~13 omu_manager~1 4 weblmt~15 cfa~16 debug_log 30MINS(30 Minutes), 60MINS(60 Minutes), 120MINS(120 Minutes), 240MINS(240 Minutes)
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MODULE
MODULE NAME
BSC6900
MODULE NAME
MRFD210304
Faulty Management
Enumeration Type
moniter~1 host_gate~2 ems_gate~3 authority~4 configure~5 maintain~6 stat~7 alarm~8 software~9 ftp_server~10 sntp~11 btsom~12 ems_agent~13 omu_manager~14 weblmt~15 cfa~16 debug_log~17
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
MONITORP ERIOD
Monitor Period
BSC6900
BSC6900
GBFD111202 GBFD111202
O&M of BTS
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
O&M of BTS
1~1440
None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Equipme nt Equipme nt
BSC6900 V900R011
Month
Month
BSC6900
Month when SET the TMU BTSAUTODLDA board CTINFO(Mandat software is GBFDory) released 111202 A quick handover can be initiated only if the rate of an MS is higher than this parameter during a SET certain GCELLHOFAST( period of GBFDOptional) time. 510102 ADD MPGRP(Mandat ory) ADD MPLNK(Mandato ry) ADD IPLOGICPORT( Optional) ADD BTSMPGRP(Ma ndatory) ADD BTSMPLNK(Man datory)
O&M of BTS
1~12
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
0~600
m/s
None
35 Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
Radio
MPGRPN
MP Group No.
BSC6900
GBFD118611 GBFD118622
None None
None
MP group
None
Not involved
Not involved
None
MPGRPN
MP Group No.
BSC6900
None
None
0~167
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
MPGRPN
Number of an MLPPP group on a BTS. It is unique in a GBFDBTS. 118611 Timeslot multiplexing mode at the Abis interface of the BTS. The BTS supports two multiplexing modes: statistical multiplexing on a 64 kbit/s timeslot and physical multiplexing on a 16 kbit/s timeslot. The first mode is further classified into the following six types: 1:1, 2:1, 3:1, 4:1, 5:1, and 6:1.
0~3
None None
None
BTS
None
PPP link
None
None
Transpor t
MPMODE
Multiplexing Mode
BSC6900
MPN
BSC6900
MPSWITCH
MCPPP Switch
BSC6900
A BTS supports the following six types of timeslot objects: OML: Communicati on address of the CBUS3 on SET the bus 485. BTSFMUABP(O The ptional) configuration SET of this BTSAPMUBP(O parameter ptional) must be SET consistent BTSDATUBP(Op with the tional) actual SET physical BTSDEMUBP(O connection. ptional) Otherwise, SET the board BTSDHEUBP(Op may not work tional) properly. ADD BTSMPGRP(Opt MCPPP ional) switch ADD BTS(Optional) ADD MPGRP(Optiona l) MP type ADD BRD(Mandatory) SET MPUBIND(Mand atory) ADD BRD(Mandatory) SET MPUBIND(Mand atory) Number of the slot where the MPU is located
GBFD111301
Enumeration Type
None MODE4_1
MODE4_1
BTS
This parameter can be set to MODE5_1 or MODE6_1 only when "FLEXABISMODE" is set Read & to FLEX_ABIS. Write
BTS
None
The BTS should be reset to If the value of this parameter is set too validate the parameter high, the RSL congestion is likely to modification. occur.
Transpor t
O&M of BTS Abis IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1
Interval Type 0~1 0~1 DISABLE(Disabl Enumeration e), Type ENABLE(Enable) DISABLE, ENABLE
None None
None
BTS
None
Not involved
Not involved
None
None ENABLE
ENABLE
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Transpor t
MPTYPE
MP type
BSC6900
Enumeration Type
None MCPPP
MCPPP
MP group
None
Not involved
Not involved
None
Transpor t
MPUSLOT
BSC6900
MRFD210301
Configuration Management
0~27
None None
None
None
None
Not involved
Not involved
None
Equipme nt
MPUSUBRA CK
BSC6900
Number of the subrack where the MPU is located Whether power control algorithm II allows measurement report compensatio n. When making a power control decision, the BSC retrieves a certain number of history measurement reports and performs weighted filtering on the receive level values and receive quality values in these reports, which may be obtained SET when GCELLPWR2(O different ptional) transmit
MRFD210301
Configuration Management
0~11
None None
None
None
None
Not involved
Not involved
None
Equipme nt
GBFD110703
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
6/9/2013
Page179of316
150682621.xls.ms_office
Security Level:
MRMISSCO UNT
BSC6900
MRMISSNU M
MRMissNumber
BSC6900
If the number of measurement reports lost consecutively is no larger than this value, linear interpolation is performed for the values in the lost measurement reports based on the values in the two measurement reports preceding and following the lost measurement reports. Otherwise, the lost measurement reports will be discarded, and the value SET will be GCELLHOFITPE recalculated N(Optional) when new When the number of the lost measurement reports exceeds this parameter during a power control SET period, the GCELLPWR3(O power ptional) control stops.
GBFD110601 GBFD510501
0~31
None None
4 Cell
None
Not involved
Not involved
Because the measure ment reports may not always be correctly decoded when the quality of a serving cell is poor, handover s may fail when the number of the lost measure ment reports exceeds the value set by this paramete r. You can set a relatively The parameter modification larger has no impact on the value for equipment. None
Radio
GBFD117601
1~255
None None
5 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
BSC6900
Frequency at which the BTSs submit preprocessed SET measurement GCELLHOCTRL reports to the GBFD(Optional) BSC 110802 Attenuation factor for the SET TMA of BTSRXUBP(Opti antenna GBFDonal) tributary 1 111202 Attenuation factor for the SET TMA of BTSRXUBP(Opti antenna GBFDonal) tributary 2 111202 Switch of measurement report collection within a specified scope. If the specified scope is a site, the switch applies to all the cells at the site; if the specified scope is a cell, the switch applies to the cell only. The switch of measurement report collection within a specified SET scope last GMRSCOPE(Ma configured GBFDndatory) takes effect. 111203 The control switch of measurement report collection includes OFF (do not collect), ON_WITH_S DCCH (collect measurement reports for SDCCHs and TCHs), and ON_WITHOU T_SDCCH (collect SET measurement GMRCTRL(Man reports for GBFDdatory) TCHs only). 111203 Negotiation parameter. This ADD parameter BTSPPPLNK(Op determines tional) the maximum ADD length of a BTSMPLNK(Opti received GBFDonal) packet. 118601 Number of MSs used when the offset information is GBFDcollected. 118201
NOreport(Do not report), Twice_ps(Twice every second), Once_ps(Once every second), Once_2s(Once every two second), Once_4s(Once NOreport, Twice_ps, every four Once_ps, Once_2s, second) Once_4s None None
Twice_ps
Cell
Not involved
Not involved
The parameter modification has no impact on the None equipment. None When this paramete r is set to Noreport, the BTSs do not submit measure ment reports to the BSC, which disables handover s and power control, and greatly impacts on the The parameter modification speech has no impact on the quality. equipment. None
Radio
Radio
MRRUATTE NFACTOR1
BSC6900
O&M of BTS
4~22
dB
4 None
BTS
None
Not involved
Not involved
None
Equipme nt
MRRUATTE NFACTOR2
BSC6900
O&M of BTS
4~22
dB
4 None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BSC
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
MRSWITCH
BSC6900
O&M of BSC
Enumeration Type
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
MRU
BSC6900
Abis over IP
128~1500
None
1500
1500 BTS
None
PPP link
None
None
Transpor t
MS
Number of MSs
BSC6900
SoftSynchronized Network
1~16
None
3 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
MSCAPABL ESTATSWIT MS Capability CH Statistic Switch MSC Available Capability<K User MSCCAP number>
BSC6900
BSC6900
BSC6900
Whether to collect the information about the MSs of different capabilities in a cell. This parameter SET has no GCELLSOFT(O impact on ptional) services. ADD Available GCNNODE(Opti capacity of onal) the MSC Number of ADD bits occupied GCNOPERATO by the NRI in R(Mandatory) the TMSI
GBFD110501 GBFD117401
Call Control
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None OFF
OFF
Cell
None
Not involved
Not involved
None
MSC Pool
0~65535
None
1800
1800 MSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
GBFD117401
MSC Pool
1~10
None None
BSC69 1 00 None
Not involved
Not involved
None
Radio
BSC6900
Special NRI that is coded together with common NRIs. This parameter is used to indicate that the BSC routes the service initiated by the MS to the MSC in non OFFLOAD GBFDstate. 117401 Whether to enable the MSC pool function on the BSC. The MSC pool function enables up to 32 MSCs to provide services for mobile subscribers in a BSC. With the MSC pool function, one BSC can be connected to multiple MSCs and the services in the BSC are shared to each MSC in all MSC GBFDpools. 117401
MSC Pool
0~1023
None
BSC69 0 00 None
Not involved
Not involved
None
Equipme nt
MSC Pool
Enumeration Type
NO(No), YES(Yes)
NO, YES
None NO
NO
BSC69 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page180of316
150682621.xls.ms_office
Security Level:
MSCSTATU E
MSC Pool
Enumeration Type
OFFLOAD(Offlo ad), NORMAL(Normal ), UNAVAIL(Unavail OFFLOAD, able) NORMAL, UNAVAIL None NORMAL
NORMAL
MSC
None
Not involved
Not involved
If the MSC pool function is enabled, and the value of this paramete r is not NORMAL , the DPC is not The parameter modification selected has no impact on the for call equipment. None If the GSM BSC is connecte d to the GSM MSC, it is recomme nded that you set this paramete r to R98_or_ below. If the GSM BSC is connecte d to the UMTS MSC, it is recomme nded that you set this paramete r to The parameter modification R99_or_ has no impact on the above. equipment. None If this timer is set to a greater value, the radio resources are occupied for a too long time, thus affecting the channel resource usage. The parameter modification If this timer is set to a smaller value, the has no impact on the call reestablishment success rate equipment. decreases.
Equipme nt
MSCVER
BSC6900
Protocol version of the MSC that is connected to the BSC. The supported signaling SET varies with GCELLCCUTRA the protocol GBFDNSYS(Optional) versions. 111804
Enumeration Type
Cell
None
Not involved
Not involved
Radio
BSC6900
SET Call GCELLTMR(Opt reestablishm GBFDional) ent timer 110503 CHK INNSPCH(Mand atory) STR CALLRESLOP( Mandatory)
5000~40000
ms
None
15000 Cell
None
Not involved
Not involved
None
Radio
MSISDN
MSISDN
BSC6900
MSISDN value
GBFD111203
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Radio
BSC6900
MSISDN prefix 1. When matching the call specified by the mobile number, the BSC adds the MSISDN prefix 1 according to SET the value of BSCBASIC(Opti this onal) parameter. MSISDN prefix 2. When matching the call specified by the mobile number, the BSC adds the MSISDN prefix 2 according to SET the value of BSCBASIC(Opti this onal) parameter. MSISDN prefix 3. When matching the call specified by the mobile number, the BSC adds the MSISDN prefix 3 according to SET the value of BSCBASIC(Opti this onal) parameter. MSISDN prefix 4. When matching the call specified by the mobile number, the BSC adds the MSISDN prefix 4 according to SET the value of BSCBASIC(Opti this onal) parameter. MSISDN prefix 5. When matching the call specified by the mobile number, the BSC adds the MSISDN prefix 5 according to SET the value of BSCBASIC(Opti this onal) parameter.
GBFD117701 GBFD117702
String Type
None
1~5 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD117701 GBFD117702
String Type
None
1~5 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
GBFD117701 GBFD117702
String Type
None
1~5 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
GBFD117701 GBFD117702
String Type
None
1~5 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
GBFD117701 GBFD117702
String Type
None
1~5 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117701 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117701
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page181of316
150682621.xls.ms_office
Security Level:
BSC6900
If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117701 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117701 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117701 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117701 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117701 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117701
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page182of316
150682621.xls.ms_office
Security Level:
BSC6900
If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117701 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117701 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117702 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117702 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117702 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117702
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page183of316
150682621.xls.ms_office
Security Level:
BSC6900
If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117702 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117702 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117702 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117702 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117702 If "Options for BSC Local Switch" is set to PREFIXNUM BER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the first three digits in the MSISDN of the called or calling are 135 or 139, the BSC local switching SET function is GBFDBSSLS(Optional) enabled. 117702 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching SET function is GBFDBSSLS(Optional) disabled. 117701
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page184of316
150682621.xls.ms_office
Security Level:
BSC6900
If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching SET function is GBFDBSSLS(Optional) disabled. 117701 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching SET function is GBFDBSSLS(Optional) disabled. 117701 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching SET function is GBFDBSSLS(Optional) disabled. 117701 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching SET function is GBFDBSSLS(Optional) disabled. 117701 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching SET function is GBFDBSSLS(Optional) disabled. 117701 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching SET function is GBFDBSSLS(Optional) disabled. 117701 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching SET function is GBFDBSSLS(Optional) disabled. 117701 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching SET function is GBFDBSSLS(Optional) disabled. 117701 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching SET function is GBFDBSSLS(Optional) disabled. 117701 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local switching SET function is GBFDBSSLS(Optional) disabled. 117702 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local switching SET function is GBFDBSSLS(Optional) disabled. 117702 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local switching SET function is GBFDBSSLS(Optional) disabled. 117702 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local switching SET function is GBFDBSSLS(Optional) disabled. 117702 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local switching SET function is GBFDBSSLS(Optional) disabled. 117702 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local switching SET function is GBFDBSSLS(Optional) disabled. 117702
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page185of316
150682621.xls.ms_office
Security Level:
BSC6900
If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local switching SET function is GBFDBSSLS(Optional) disabled. 117702 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local switching SET function is GBFDBSSLS(Optional) disabled. 117702 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local switching SET function is GBFDBSSLS(Optional) disabled. 117702 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local switching SET function is GBFDBSSLS(Optional) disabled. 117702 Whether to enable "Triggering the quick PBGT algorithm only when an SET MS is far GCELLHOFAST( from the GBFDOptional) BTS" 510102 Maximum number of Channel Request messages that can be sent by an MS in an immediate assignment procedure. After the MS initiates the immediate assignment procedure, it always listens to the messages on the BCCH and all the common control channels (CCCHs) in the CCCH group to which the MS belongs. If the MS does not receive SET Immediate GCELLCCBASI Assignment GBFDC(Optional) or Immediate 111003
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
MSLEVSTR QPBGT
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
Radio
BSC6900
1_Times(1_Time s), 2_Times(2_Time s), 4_Times(4_Time s), 7_Times(7_Time 1_Times, 2_Times, s) 4_Times, 7_Times CLEAR(Cleared) , LOP(Lockout of Protection), FS(Forcibly switchover working link to protection link), MS(Manual switchover from working link to protection link), EXERS(Exercisel y switch working link to protection CLEAR, LOP, FS, link) MS, EXERS, MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS5(MCS5), MCS6(MCS6), MCS7(MCS7), MCS8(MCS8), MCS9(MCS9)
None None
None
Cell
None
Not involved
Not involved
None
This parameter should be set as required: In the areas where the traffic volume is low, this parameter can be set to 4 or 7 to improve the success rate of MS access. In the areas where congestion The parameter modification occurs or in the micro cells where the has no impact on the traffic volume is high, it is recommended Versions earlier than equipment. this parameter be set to 1. BSC6900 V900R011
Radio
MSPCMD
BSC6900
Control command of the MSP SET switchover MSPCMD(Mand protection atory) group
None
None
Enumeration Type
None None
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
Threshold of the MS Receiver Diversity (MSRD) GBFDmode. 510801 PDCH Downlink multiplex threshold in the Mobile Station Receiver Diversity (MSRD) mode. When this parameter is set to "80", the MS does not adopt the MSRD mode. When the number of the TBF on the PDCH that is assigned to the MS exceeds this parameter or the coding rate of the PDCH is smaller than the threshold of the coding rate in MSRD mode, the GBFDMS is 510801
MSRD
Enumeration Type
Not involved
Not involved
None
BSC6900 V900R011
Radio
MSRD
10~80
None None
40 Cell
The value of this parameter must be smaller than or equal to "PDCH Downlink Multiplex Threshold".
Not involved
Not involved
None
BSC6900 V900R011
Radio
MSRN
BSC6900
Number of the subrack where the board is located. The management board refers to the TMU or RXU that directly communicate SET s with the BTSFMUABP(O board. The ptional) configuration SET of this BTSAPMUBP(O parameter ptional) must be SET consistent BTSDATUBP(Op with the tional) actual SET physical BTSDEMUBP(O connection. ptional) Otherwise, SET the board BTSDHEUBP(Op may not work GBFDtional) properly. 111202
O&M of BTS
0~254
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page186of316
150682621.xls.ms_office
Security Level:
MSRXMIN
BSC6900
The M criteria supports setting minimum values for the downlink receive level of neighboring cells. The M criteria is met only when , Estimated downlink level of neighboring cells >= ("Min DL level on candidate Cell" + "Min Access Level Offset") Estimated uplink level of neighboring cells >= GBFD("Min UL 110601 level on GBFDcandidate 510501
0~63
dB
None
10 Cell
None
Not involved
Not involved
None
This parameter limits the number of candidate cells. If this parameter is set to a greater value, some desired cells may be excluded from the candidate cells and call drops may occur. If this parameter is The parameter modification set to a smaller value, an unwanted cell has no impact on the may become the candidate cell, thus Versions earlier than equipment. leading to handover failures or call drops. BSC6900 V900R011
Radio
When the number of received measurement reports on the downlink transmission quality exceeds this threshold, the system determines whether to SET start GCELLNC2PAR emergency GBFDA(Optional) reselection. 116201 Duration of the flow control timer F of the MS. The MS sends the flow control SET message BSSGPPARA(O according to GBFDptional) this duration. 119001 If no handshake message is received from the peer within the delay, the SET master GBSCREDGRP( service is GBFDOptional) activated. 113725 Maximum TX power for the SET MS to GCELLSERVPA access the GBFDRA(Optional) PCH. 114101 Usage threshold of the CPU for called access. If the usage of the CPU exceeds the threshold, the called access request is transferred SET to other CPU BSCFCPARA(O for GBFDptional) processing. 111705
0~255
None None
200 Cell
None
Not involved
Not involved
None
Radio
MSTF
BSC6900
Gb Interface Function
1000~3000
ms
None
1000 BSC
None
Not involved
Not involved
None
Equipme nt
MSTSERVA CTDELAY
BSC6900
1~600
45 None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
GPRS
0~31
None None
2 Cell
None
Not involved
Not involved
None
Radio
MTCACCES SCPURATE
BSC6900
50~95
per cent
None
BSC69 85 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
MTHD
Method
BSC6900
None
None
Enumeration Type
None None
None
E1/T1 port
None
Not involved
Not involved
Not involved
None
Transpor t
MTP2LNKN
BSC6900
MTU
MTU value
BSC6900
None
0~63
None None
None
None
Not involved
Not involved
Not involved
None
500~1500
None
800
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None The interconn ection may be affected if this paramete The parameter modification r is has no impact on the modified. equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
MTU
MTU[Byte]
BSC6900
None
None
776~1696
byte
1696
BSC6900
If the MTU configuration fails to meet the requirement of the network, the services will be adversely affected.
BSC6900 V900R011
Transpor t
MTU
MTU[Byte]
BSC6900
None
None
256~1650
byte
None
MTU
MTU
BSC6900
Maximum number of bytes allowed for a packet transmitted or received on the FE GBFDport 118611
0~1500
None None
Ethern 1500 et port None If "MTU" is set to a value smaller than 576, the DHCP procedure may fail when the BTS tries to retrieve the IP address, and thus the BTS cannot work. The recommended value of this parameter is 1500. Do not modify it unless in special scenarios, for example, at the bottom layer where the number of MTU is limited. BTS None
BSC6900
The interconn ection may be affected if this If the mode is not paramete The parameter modification consistent, will interrupt r is has no impact on the service until it is consistent. modified. equipment. None
Transpor t
Not involved
Not involved
None
Radio
MTVT
O&M of BTS
19.0~24.0, step:0.1
None
225 BTS
None
Not involved
Not involved
This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
BSC6900
BSC6900
Multi-band point report value, including "report six cells with the strongest signal at each frequency point", "report one cell with the strongest signal at each frequency point","report two cells with the strongest signal at each frequency point", and "report three cells with the strongest signal at SET each GCELLSERVPA frequency GBFDRA(Optional) point". 114101 The user sets the function of one-way audio check on the BSC. If the function is enabled, the BSC notifies the DPU to perform oneway audio SET check when TCPARA(Option a call is GBFDal) established. 111203 This parameter indicates the SET duration of TCPARA(Option the one-way al) audio check.
GPRS
Enumeration Type
REPORT6(Repo rt six), REPORT1(Repo rt one), REPORT2(Repo REPORT6, rt two), REPORT1, REPORT3(Repo REPORT2, rt three) REPORT3
None None
REPORT6
Cell
None
Not involved
Not involved
None
Radio
O&M of BSC
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
CLOSE
Board
None
Not involved
Not involved
None
Equipme nt
Mute_Timer
Mute Timer
BSC6900
GBFD111203
O&M of BSC
0~255
None
5 Board
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page187of316
150682621.xls.ms_office
Security Level:
BSC6900
Time for prohibiting the call from accessing the correspondin g channel where oneway audio is detected on the Abis GBFDinterface. 116401 Whether to forcibly release a call after the forced handover fails in the case of oneway audio on the Abis GBFDinterface. 116401 Maximum waiting duration when the MUX operation is performed for the subframe over the PPPMUX link
{0~15}
min
None
0 Cell
None
Not involved
Not involved
Not involved
If the value of this paramete r is increase d, the cell congestio n rate increases . If the value of this paramete r is decrease d, oneway audio may persist after the The parameter modification handover has no impact on the . equipment. None
Radio
MUTERELC ALLEN
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
Not involved
If this paramete r is set to YES, the call drop The parameter modification rate may has no impact on the increase. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None The adjacent node ID must be The parameter modification configure has no impact on the d. equipment. None
Radio
MUXTIME
BSC6900
GBFD118611 GBFD118622
1~1500
ls
1000
None
PPP link
Transpor t
MUXTIME
BSC6900
Maximum waiting duration when the MUX operation is performed for the subGBFDADD frame over 118611 MPGRP(Optiona the PPPMUX GBFDl) link 118622
1~1500
ls
None
MP 1000 group
None
Not involved
Not involved
Transpor t
MUXTYPE
IP MUX Type
BSC6900
GBFD118604 GBFD118610
None None
None
IP path None
Not involved
Not involved
Transpor t
MWTRXNO
BSC6900
Minimum number of reserved working status TRXs GBFDof the cabinet 111202
O&M of BTS
0~12
None None
6 BTS
None
Not involved
Not involved
None
Equipme nt
GBFD118609
None
None
None
Not involved
Not involved
Not involved
None
Transpor t
N200
N200
BSC6900
System parameter in the LAPD protocol. The value of this parameter specifies the maximum number of times when a SET frame is BTSRINGATTR( retransmitted GBFDOptional) . 117801 Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. This parameter indicates the maximum number of retransmissio ns of the I frame. For the function of N200 and the effect of the parameter, see the description of "T200 SDCCH". Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. This parameter indicates the maximum number of retransmissio ns of the I frame on the FACCH (a full-rate channel). For the function of N200 and the effect of the parameter, see the description of "T200 SDCCH". Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. This parameter indicates the maximum number of retransmissio ns of the I frame on the FACCH (a half-rate channel). For the function of N200 and the effect of the parameter, see the description of "T200 SDCCH".
Ring Topology
1~3
None None
When the transmission quality is good, the recommended settings are as follows: "Ring II Wait Time Before Switch" = 0; "Ring II Try Rotating Duration Time" = 60; "Ring II Rotating Penalty Time" = 0; "T200(10ms)" = 12; "T203(s)" = 1; and "N200" = 3. When the transmission quality is bad, the recommended settings are as follows: "Ring II Wait Time Before Switch" = 30; "Ring II Try Rotating Duration Time" = 60; "Ring II Rotating Penalty Time" = 0; "T200(10ms)" = 24; "T203(s)" = 3; and "N200" = 3. BTS
None
Not involved
Not involved
None
Radio
N200ESTAB
N200 of Establish
BSC6900
GBFD111002
5~254
None None
None
Cell
N200ESTAB must be set when "N200PARASWITCH" is Read & set to YES. Write
Not involved
Not involved
None
Radio
N200FFULL
BSC6900
GBFD111002
34~254
None None
None
Cell
None
Not involved
Not involved
None
Radio
N200FHALF
BSC6900
GBFD111002
29~254
None None
None
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page188of316
150682621.xls.ms_office
Security Level:
BSC6900
N200REL
N200 of Release
BSC6900
Whether the BSC sends the LAPDm N200 parameter to the BTS. If this parameter is set to YES, the BSC sends the LAPDm N200 parameter. If this parameter is set to NO, the BSC does not send the LAPDm N200 parameter. Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. This parameter indicates the maximum number of retransmissio ns of the I frame during the multiframe release. For the function of N200 and the effect of the parameter, see the description of "T200 SDCCH".
GBFD111002
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
None
Cell
None
Not involved
Not involved
None
Only the BTS3X in G3BTS32.30000.04.1130 or later and the double-transceiver BTSs support the LAPDm N200 parameter. If this parameter is set to Yes, the BSC sends the LAPDm N200 parameter. If this parameter is set to OFF, the BSC does not send the LAPDm N200 parameter. The parameter modification If a BTS does not support this parameter, has no impact on the the parameter should be set to No. Versions earlier than equipment. Otherwise, the BTS cannot be initialized. BSC6900 V900R011
Radio
GBFD111002
5~254
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. This parameter indicates the maximum number of retransmissio ns of the I frame on the SACCH. For the function of N200 and the effect of the parameter, see the description of "T200 GBFDSDCCH". 111002
5~254
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
N3101
BSC6900
N3103
BSC6900
Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. This parameter indicates the maximum number of retransmissio ns of the I frame on the SDCCH. For the function of N200 and the effect of the parameter, see the SET description of GCELLCCTMR( "T200 Optional) SDCCH". Maximum value of the N3101 counter. In the dynamic uplink allocation mode, the network side enables multiple MSs to share the same uplink channel through the USF value in the downlink data block. After the network side allocates the USF to the uplink TBF (the uplink TBF is set up successfully), N3101 is started. The network side waits for the SET RLC uplink GCELLSTANDA data block RDOPTPARA(O sent by the ptional) MS. If the Maximum value of the N3101 counter. When the uplink transmission ends, if the network side receives the last RLC data block, the network side sends an FAI=1 uplink packet acknowledge d/unacknowle dged message and starts N3103. If the packet control acknowledge ment message is not received in the specified time, N3103 SET is increased GCELLSTANDA on the RDOPTPARA(O network side ptional) and the
GBFD111002
23~254
None None
None
Cell
None
Not involved
Not involved
None
Radio
GBFD114101
GPRS
8~30
None None
20 Cell
None
Not involved
Not involved
None
Radio
GBFD114101
GPRS
2~5
None None
3 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page189of316
150682621.xls.ms_office
Security Level:
N3105
BSC6900
N391
N392
N393
Maximum value of the N3105 counter. After the downlink TBF is set up successfully, the N3105 is started on the network side. After the downlink RLC data block is added with the RRBP domain on the network side, the valid packet acknowledge d message responded by the MS is received in the uplink RLC data block in the RRBP SET domain. In GCELLSTANDA this case, RDOPTPARA(O N3105 is ptional) reset. Counter on the DTE side. After link integrity is verified according to DTE parameter (N391), the global state query request is originated on ADD the DTE BC(Optional) side. Counter on the DTE side, recording the checking times (DTE parameter N393). After link integrity is verified according to DTE parameter (N392), the state is restored. That is: if a fault occurs on the DTE side, and the system is found normal in the checking times (DTE parameter N392) out of the checking times (DTE parameter N393), the system is ADD switched to BC(Optional) the normal Counter on the DTE side, recording the checking times (DTE parameter N393). After link integrity is verified according to DTE parameter (N392), the state is restored. That is: if a fault occurs on the DTE side, and the system is found normal in the checking times (DTE parameter N392) out of the checking times (DTE parameter N393), the system is ADD switched to BC(Optional) the normal
GBFD114101
GPRS
3~10
None None
10 Cell
None
Not involved
Not involved
None
Radio
GBFD510002
Gb Over FR
1~255
None
6 BC
None
Not involved
Not involved
None
Equipme nt
GBFD510002
Gb Over FR
1~10
None
3 BC
None
Not involved
Not involved
None
Equipme nt
GBFD510002
Gb Over FR
1~10
None
4 BC
None
Not involved
Not involved
None
Equipme nt
NACCSPT
Support NACC
BSC6900
Whether to support the network assisted cell change (NACC). The NACC is used in the network control modes NC0, NC1 or NC2. The NACC enables the network to notify the MS of the system information of the neighboring cell when the MS is in the packet transmission state. In this way, the MS SET can reselect GCELLGPRS(O a cell in a GBFDptional) shorter time. 116301 ADD OPC(Mandatory) ADD N7DPC(Mandato ry) ADD MTP3RT(Manda tory) ADD MTP3LKS(Mand atory) ADD MTP3LNK(Mand atory) ADD ADJNODE(Mand atory)
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
This parameter is valid only when "GPRS" is set to SupportAsInnPcu or Read & SupportAsExtPcu. Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write
Not involved
Not involved
None
NAME
OSP name
BSC6900
OSP name.
None
None
String Type
None
1~49 characters
None None
None
None
None
Not involved
Not involved
None
NAME
DSP name Signalling Route name Signalling link set name Signalling link name Adjacent Node Name
BSC6900
None
None
String Type
None
1~49 characters
None None
None
None
None
Not involved
Not involved
None
NAME
BSC6900
None
None
String Type
None
1~31 characters
None None
None
None
None
Not involved
Not involved
None
NAME
BSC6900
Signaling link set name. None One MTP3 link name. Adjacent node name Local entity name. The local entity name must be unique. Destination entity name.
None
String Type
None
1~31 characters
None None
None
None
None
Not involved
Not involved
None
NAME
BSC6900
None
None
String Type
None
1~31 characters
None None
None
None
None
Not involved
Not involved
None
NAME
BSC6900
None
None
String Type
None
1~31 characters
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
None
None
None
None
None
None
NAME
BSC6900
NAME
BSC6900
None
None
String Type
None
1~49 characters
None None
None
None
None
Not involved
Not involved
None
None
None
String Type
None
1~49 characters
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
NAME
BSC6900
The M3UA route names and the M3UA routes are in the ADD one-to-one M3RT(Mandator matching y) relation. None M3UA link set name. The names of the M3UA ADD signaling link M3LKS(Mandato sets must be ry) unique. None M3UA signaling link name. The M3UA link names and the M3UA links are in ADD the one-toM3LNK(Mandato one matching ry) relation. None SET BSCBASIC(Opti name of the GBFDonal) BSC 111203 ADD Name of the PCU(Mandatory) PCU. Whether to preferentially allocate loose multiplexing SET frequencies GCELLCHMGA to non-AMR D(Optional) users GBFD114101
None
String Type
None
1~31 characters
None None
None
None
None
Not involved
Not involved
None
Transpor t
NAME
BSC6900
None
String Type
None
1~49 characters
None None
None
None
None
Not involved
Not involved
None
Transpor t
NAME
BSC6900
None
String Type
None
1~31 characters
None None
None
None
None
Not involved
Not involved
None
Name
BSC name
BSC6900
O&M of BSC
String Type
None
1~64 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
NAME
PCU Name
BSC6900
GPRS
String Type
None
1~50 characters
None None
None
BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
NAMRLFRM TRXALLOW ED
BSC6900
GBFD111005
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page190of316
150682621.xls.ms_office
Security Level:
NAVGI
N_AVG_I
BSC6900
Filter consistent of the collision signal strength of power control. When sampling must be performed (NAVGI) times before the MS obtains the SET efficient GCELLPSPWPA measurement GBFDRA(Optional) signal. 119115 Whether to enable the TFO function on the BTS through a CHANNEL ACTIVATION SET or MODE GCELLBASICPA MODIFY RA(Optional) message.
Power Control
0~15
None None
2 Cell
None
Not involved
Not involved
None
Radio
NBAMRTFO SWITCH
TFO Switch
BSC6900
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification When this parameter is set to ENABLE, has no impact on the the MOS can be increased in a call equipment. between MSs.
Radio
BSC6900
None
None
1024~65535
None None
None
SCTP link
The services are interrupted until the SCTP link is working normally.
The paramete r modificati on should be negotiate d with the peer end, and the BSC should be reset after the modificati on. It is recomme nded that this paramete r should not be modified when the The BSC should be reset to system is validate the parameter running. modification. None
Transpor t
Uniform number of neighboring cell 1 index within a BSC, which uniquely identifies a ADD cell and is in GIBCAPNCGRP the range 0 MRFD(Mandatory) to 5047. 210301 ADD Name of GIBCAPNCGRP neighboring (Mandatory) GSM cell 1
GBFD117002
Configuration Management Interval Type 0~5047 IBCA (Interference Based Channel Allocation) String Type None
0~5047
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
Index of neighboring GSM cell 2. Uniform number of a cell index within a BSC, which uniquely identifies a ADD cell and is in GIBCAPNCGRP the range 0 MRFD(Mandatory) to 5047. 210301 ADD Name of GIBCAPNCGRP neighboring (Mandatory) GSM cell 2
GBFD117002
Configuration Management Interval Type 0~5047 IBCA (Interference Based Channel Allocation) String Type None
0~5047
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
NBR2GNCEL Neighbor 2G Cell LID Index NBR2GNCEL Neighbor 2G Cell LNAME Name
BSC6900
BSC6900
Uniform number of a cell index within a BSC, which ADD uniquely G2GNCELL(Man identifies a MRFDdatory) cell 210301 ADD G2GNCELL(Man Name of a MRFDdatory) cell 210301 Uniform number of a neighboring cell index within a BSC, which uniquely identifies a cell The value range of the index of a 3G ADD external cell G3GNCELL(Man is 5048 to datory) 8047. ADD Name of a G3GNCELL(Man neighboring datory) cell When this switch is on, it indicates that the data of the adjacent cell is generated automatically . When this switch is off, it indicates that these SET data must be BTSAUTOPLAN configured CFG(Optional) manually. ADD Cell ID of a G2GNCELL(Man neighboring datory) cell Local Area Code (LAC) ADD of a G2GNCELL(Man neighboring datory) cell Mobile
0~5047
None None
None
Cell
None
Not involved
Not involved
None
String Type
None
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
NBR3GNCEL Neighbor Cell LID Index NBR3GNCEL Neighbor Cell LNAME Name
BSC6900
MRFD210301 MRFD210301
5048~8047
None None
None
Cell
None
Not involved
Not involved
None
BSC6900
String Type
None
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
NBRCELLS WITCH
GBFD510702 MRFD210301
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
Cell
None
Not involved
Not involved
None
NBRCI
Neighbour Cell CI
BSC6900
0~65535
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
Radio
NBRLAC
BSC6900
MRFD210301
Configuration Management
1~65533, 65535
None None
None
Cell
None
Not involved
Not involved
None
Radio
NBRMCC
BSC6900
Country Code (MCC) ADD of a G2GNCELL(Man neighboring MRFDdatory) cell 210301 Mobile Network Code (MNC) ADD of a G2GNCELL(Man neighboring datory) cell Whether the PCU of the cell supports the 64 neighboring cells. This parameter determines the capability of reporting the number of the neighboring cells of the SET BSC in the GCELLGPRS(O NACC and ptional) NC2 function.
Configuration Management
String Type
None
1~3 characters
None None
None
Cell
None
Not involved
Not involved
None
Radio
NBRMNC
BSC6900
MRFD210301
Configuration Management
String Type
None
1~3 characters
None None
None
Cell
None
Not involved
Not involved
None
Radio
NBRSPT64
BSC6900
GBFD116201 GBFD116301
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
GBFD116201
Enumeration Type
None None
NOTSUPPORT
BSC
None
Not involved
Not involved
This paramete r is valid only when "NC2SPT " in "SET GCELLG PRS" is set to YES and "NCO" in "SET GCELLP SBASE" The parameter modification is set to has no impact on the NC2. equipment. None
Radio
NC2SPT
Support NC2
BSC6900
Whether to support the network control 2 (NC2). The NC2 enables the network side to control the cell reselection for the MS when the MS reports the measurement report of the local cell and SET the GCELLGPRS(O neighboring GBFDptional) cell. 116201
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
This parameter is valid only when "GPRS" is set to SupportAsInnPcu or Read & SupportAsExtPcu. Write
Cell
None
Radio
6/9/2013
Page191of316
150682621.xls.ms_office
Security Level:
NCC
NCC
BSC6900
Network color code that is provided by the telecom operator. The NCC is used to identify networks from area to ADD area. The GCELL(Optional NCC is ) unique ADD nationwide. GEXT2GCELL( The BCC and MRFDMandatory) the NCC 210301 Network color code. It is used to uniquely identify different public land mobile network (PLMN) of the adjacent country. A set of NCCs of the cells to be measured by the MS. This parameter is an information element (IE) in the system information type 2 and 6 messages. If a bit of the value of this parameter is set to 1, the MS reports the correspondin g measurement report to the BTS. The value of this parameter has a byte (eight bits). Each bit maps with an NCC (0~7) and the most significant bit corresponds NCC bitmap of the measurement report sent by the MS. The MS reports only the NCC bitmap of the BSIC and the cell measurement report that matches the bitmap. For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. This parameter indicates the number of measurement reports used for the filtering of neighboring cell information. For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. This parameter indicates the number of measurement reports used for the filtering of neighboring cell signal strength.
Configuration Management
0~7
None None
None
Cell
None
Cell
None
Radio
NCC
NCC
BSC6900
GBFD510701
0~7
None None
None
Cell
None
Not involved
Not involved
None
BSC6900
GBFD110401 GBFD110402
SELECTION0_P ERM, SELECTION1_P ERM, SELECTION2_P ERM, SELECTION3_P ERM, SELECTION4_P ERM, SELECTION5_P ERM, SELECTION6_P ERM, SELECTION7_P ERM
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the Versions earlier than equipment. None BSC6900 V900R011 The most significant three bits of BSIC for all cells map with the NCC. NCC Permitted should be set properly to avoid too many call drops. The MS does not report the information on the neighboring cells in the network whose corresponding NCC bit is set to 0. Thus, this parameter should be set properly. Otherwise, an MS during an ongoing call cannot perform normal handover and a cross-coverage call drop occurs. For details, see GSM Rec. 05. 08. During an ongoing call, the MS reports to the BTS the signal information on neighboring cells. A report covers a maximum of six cells. Thus, the MS should report those possible target cells, rather than selecting cells only based on the signal level. Generally, the MS does not report the information on the cells belonging to other GSM PLMNs. This function enables the MS to measure only those specified cells. This parameter specifies the codes of the NCCs to be measured by the MS. On the SCH, the system constantly transmits the BSIC, the first three bits of which indicate the NCC. Thus, the MS needs to compare only this parameter with the adjacent NCCs measured. Then, the MS reports the matched NCCs to the The parameter modification BTS and discards others. has no impact on the The setting of this parameter affects only Versions earlier than equipment. those MSs during conversation, as well as BSC6900 V900R011
Radio
Radio
GBFD110801 GBFD110802
0~255
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD510102
ms
None
4 Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
Radio
NCELLFLTL EN
BSC6900
GBFD110601 GBFD510501
ms
None
4 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD510901
0~127
dB
None
The following condition must be met: "NcellInterFLevelThres1" BSC69 > Read & 0 00 "NcellInterFLevelThres0". Write The following condition must be met: "NcellInterFLevelThres2" > "NcellInterFLevelThres1" BSC69 > Read & 49 00 "NcellInterFLevelThres0". Write The following condition must be met: "NcellInterFLevelThres3" > "NcellInterFLevelThres2" BSC69 > Read & 55 00 "NcellInterFLevelThres1". Write The following condition must be met: "NcellInterFLevelThres4" > "NcellInterFLevelThres3" BSC69 > Read & 61 00 "NcellInterFLevelThres2". Write The following condition must be met: "NcellInterFLevelThres5" > "NcellInterFLevelThres4" BSC69 > Read & 64 00 "NcellInterFLevelThres3". Write The following condition must be met: "NcellInterFLevelThres6" > "NcellInterFLevelThres5" BSC69 > Read & 67 00 "NcellInterFLevelThres4". Write The following condition must be met: "NcellInterFLevelThres7" > "NcellInterFLevelThres6" BSC69 > Read & 73 00 "NcellInterFLevelThres5". Write The following condition must be met: "NcellInterFLevelThres7" BSC69 > Read & 79 00 "NcellInterFLevelThres6". Write The setting of this parameter must meet the following condition: "NCHSTARTBLOCK"" <= Read & "NCHOCBLOCKNUM". Write
Not involved
Not involved
None
Radio
BSC6900
GBFD510901
0~127
dB
None
Not involved
Not involved
None
Radio
BSC6900
GBFD510901
0~127
dB
None
Not involved
Not involved
None
Radio
BSC6900
GBFD510901
0~127
dB
None
Not involved
Not involved
None
Radio
BSC6900
GBFD510901
0~127
dB
None
Not involved
Not involved
None
Radio
BSC6900
GBFD510901
0~127
dB
None
Not involved
Not involved
None
Radio
BSC6900
Neighboring cell SET interference OTHSOFTPARA level (Optional) threshold 6 Neighboring cell SET interference OTHSOFTPARA level (Optional) threshold 7 Number of blocks occupied by SET the NCH in GCELLGSMR(O the group call ptional) service
GBFD510901
2G/3G Neighboring Cell Automatic Optimization 2G/3G Neighboring Cell Automatic Optimization Public Voice Group Call Service Public Voice Broadcast Service Public Voice Group Call Service Public Voice Broadcast Service
0~127
dB
None
Not involved
Not involved
None
Radio
BSC6900
GBFD510901
0~127
dB
None
Not involved
Not involved
None
Radio
NCHOCBLO CKNUM
GBFD510301 GBFD510302
0~7
None None
None
Cell
Not involved
Not involved
None
Radio
BSC6900
Number of the start block occupied by GBFDSET the NCH in 510301 GCELLGSMR(O the group call GBFDptional) service 510302
0~7
None None
None
Cell
The setting of this parameter must meet the following condition: "NCHSTARTBLOCK"" <= Read & "NCHOCBLOCKNUM". Write
Not involved
Not involved
None
Radio
6/9/2013
Page192of316
150682621.xls.ms_office
Security Level:
NCO
BSC6900
Network control mode for cell reselection of the MS. There are three modes. NC0: normal MS control. The MS shall perform autonomous cell reselection. NC1: MS control with measurement reports. The MS shall send measurement reports to the network and the MS shall perform autonomous cell reselection. NC2: network control. The SET MS shall GCELLPSBASE( send GBFDOptional) measurement 119107 The DSP and OSP are in the associated ADD mode or non N7DPC(Optional associated ) mode. None ADD IP address XPUVLAN(Mand mask of the MRFDatory) VLAN 210301 Minimum interval between two consecutive emergency handovers performed by an MS. During this interval, no GBFDSET emergency 110601 GCELLHOCTRL handover is GBFD(Optional) allowed. 510501 ADD OMUIPRT(Mand IP address of atory) the next hop. None
Enumeration Type
None None
nc0
Cell
None
Not involved
Not involved
None
Radio
NEIGHBOR
Adjacent flag
BSC6900
None YES
YES
SCCP
None
BSC6900
None
NETMASK
Net Mask
BSC6900
None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
BSC6900
0~60
None
4 Cell
None
Not involved
Not involved
None
NEXTHOP
BSC6900
None
None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
If this parameter is set to a smaller value, handovers are performed frequently; if this parameter is set to a greater value, handovers cannot be performed timely, Versions earlier than thus leading to call drops. BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
None
NEXTHOP
BSC6900
None
None
IP Address Type
None
None
IP route
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
NEXTHOP
BSC6900
None
None
IP Address Type
None
None
None
None
Not involved
Not involved
Not involved
None
Transpor t
NEXTHOP
BSC6900
ADD BTSIPRT(Manda tory) ADD BTSIPRTBIND( IP address of GBFDMandatory) the next hop 118611
IP Address Type
None
BTS
None
Not involved
Not involved
None
Transpor t
NI
Network ID
BSC6900
ADD OPC(Mandatory) Network ID. Name of the file to be downloaded. The file name must be complete and does not contain a wildcard. This parameter is related to the paging channel of the system. There are three network operation modes: network operation mode I, network operation mode II, and network operation mode III. Network operation mode I is used when the system is configured with the Gs interface. Network operation mode II is used when the system is not Lower limit of input voltage 1 Upper limit of input voltage 1 Lower limit of input voltage 2 Upper limit of input voltage 2 Lower limit of input voltage 3 Upper limit of input voltage 3 Lower limit of input voltage 4 Upper limit of input voltage 4 Lower limit of input voltage 5 Upper limit of input voltage 5 Lower limit of input voltage 6 Upper limit of input voltage 6
None
None
Enumeration Type
None None
None
SCCP
Not involved
Not involved
Not involved
None
Equipme nt
NM
BSC6900
MRFD210301
Configuration Management
String Type
None
1~62 characters
None None
None
None
None
Not involved
Not involved
None
Equipme nt
NMO
NO1M48AL Lower limit of No.1 MTHDDOWN input -48V[-V] BSC6900 NO1M48AL MTHDUP Upper limit of No.1 input -48V[-V] BSC6900
NO2M48AL Lower limit of No.2 MTHDDOWN input -48V[-V] BSC6900 NO2M48AL MTHDUP Upper limit of No.2 input -48V[-V] BSC6900
NO3M48AL Lower limit of No.3 MTHDDOWN input -48V[-V] BSC6900 NO3M48AL MTHDUP Upper limit of No.3 input -48V[-V] BSC6900
NO4M48AL Lower limit of No.4 MTHDDOWN input -48V[-V] BSC6900 NO4M48AL MTHDUP Upper limit of No.4 input -48V[-V] BSC6900
NO5M48AL Lower limit of No.5 MTHDDOWN input -48V[-V] BSC6900 NO5M48AL MTHDUP Upper limit of No.5 input -48V[-V] BSC6900
NO6M48AL Lower limit of No.6 MTHDDOWN input -48V[-V] BSC6900 NO6M48AL MTHDUP Upper limit of No.6 input -48V[-V] BSC6900
SET GCELLPSBASE( Optional) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal)
GBFD119108 MRFD210304 MRFD210304 MRFD210304 MRFD210304 MRFD210304 MRFD210304 MRFD210304 MRFD210304 MRFD210304 MRFD210304 MRFD210304 MRFD210304
Network Operation Mode Support Faulty Management Faulty Management Faulty Management Faulty Management Faulty Management Faulty Management Faulty Management Faulty Management Faulty Management Faulty Management Faulty Management Faulty Management
Enumeration Type
NMOI(Network Operation Mode I), NMOII(Network Operation Mode II), NMOIII(Network Operation Mode III), RES(Reserved)
None None
NMOII
Cell
None
Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write
Not involved
Not involved
None
40~45
None
None
None
None
Not involved
Not involved
None
55~59
None
None
None
None
Not involved
Not involved
None
40~45
None
None
None
None
Not involved
Not involved
None
55~59
None
None
None
None
Not involved
Not involved
None
40~45
None
None
None
None
Not involved
Not involved
None
55~59
None
None
None
None
Not involved
Not involved
None
40~45
None
None
None
None
Not involved
Not involved
None
55~59
None
None
None
None
Not involved
Not involved
None
40~45
None
None
None
None
Not involved
Not involved
None
55~59
None
None
None
None
Not involved
Not involved
None
40~45
None
None
None
None
Not involved
Not involved
None
55~59
None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt Equipme nt Equipme nt Equipme nt Equipme nt Equipme nt Equipme nt Equipme nt Equipme nt Equipme nt Equipme nt Equipme nt
None
None
None
None
None
None
None
None
None
None
None
None
BSC6900
Whether to allow nonAMR voice F- GBFDH handover 510501 Decides the offset of the current ATCB together with other two parameters: "F-H Ho Period" and period of triggering a FH handover, thus selecting target users for F-H handovers. ATCB offset = (Period of triggering a FH handover / "F-H Ho Period" + 1) * "Non-AMR F-H Ho ATCB Adjust GBFDStep". 510501 When the ATCB value of non-AMR full rate voice is no smaller than this parameter, the condition for non-AMR F-H handovers is GBFDmet. 510501
HUAWEI II Handover
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM2. Write
Not involved
Not involved
None
If this parameter is set to YES, FR calls can be switched into HR calls to relieve the network congestion, but the voice quality is decreased; if this parameter is set to NO, FR calls cannot be switched The parameter modification into HR calls, that is, network congestion has no impact on the cannot be relieved through the handover equipment. from TCHF to TCHH.
Radio
BSC6900
HUAWEI II Handover
0~255
dB
None
2 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "NOAMRFULLTOHALFH Read & OALLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, the handover margin is increased in a short period and many MSs are handed over from TCHF to TCHH, thus affecting the voice quality. If this parameter is set to a smaller value, the handover margin is enlarged slowly The parameter modification and it takes a long time to initiate a TCHFhas no impact on the TCHH handover. Thus, the network Versions earlier than equipment. congestion cannot be relieved in time. BSC6900 V900R011
Radio
BSC6900
HUAWEI II Handover
0~255
dB
None
30 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "NOAMRFULLTOHALFH Read & OALLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, only MSs in the center of the cell can meet the handover condition. Thus, the network congestion cannot be relieved in time. If this parameter is set to a smaller value, The parameter modification MSs at the edge of the cell can also meet has no impact on the the handover condition, thus affecting the Versions earlier than equipment. voice quality. BSC6900 V900R011
Radio
6/9/2013
Page193of316
150682621.xls.ms_office
Security Level:
BSC6900
Decides the current path cost offset together with other two parameters: "F-H Ho Period" and period of triggering a FH handover, thus selecting target users for F-H handovers. Path cost offset = (Period of triggering a FH handover / "F-H Ho Period" + 1) * "Non-AMR F-H Ho Pathloss GBFDAdjust Step". 510501 When the path loss value of nonAMR full rate voice is no larger than this parameter, the condition for non-AMR F-H handovers is GBFDmet. 510501 Quality threshold for non-AMR FH handovers. When the uplink receive quality and downlink receive quality of a user are both smaller than this parameter, a F-H handover is triggered GBFDfor the user. 510501 When the load of a cell is no smaller than this threshold, non-AMR FH handovers are triggered GBFDin the cell. 510501 When the ATCB value of non-AMR half rate voice is no larger than this threshold, the condition for non-AMR HF handovers GBFDis met. 510501 When the path loss value of nonAMR half rate voice is no smaller than this threshold, the condition for non-AMR HF handovers GBFDis met. 510501 Whether to trigger nonAMR H-F handovers according to the uplink and downlink receive GBFDquality. 510501 Quality threshold for non-AMR HF handovers. When the receive quality of a user is no smaller than this parameter, the user meets the condition for H-F GBFDhandovers. 510501 When the load of a cell is no larger than this threshold, non-AMR HF handovers are triggered GBFDin the cell. 510501
HUAWEI II Handover
0~255
dB
None
1 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "NOAMRFULLTOHALFH Read & OALLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, the handover margin is increased in a short period and many MSs are handed over from TCHF to TCHH, thus affecting the voice quality. If this parameter is set to a smaller value, the handover margin is enlarged slowly The parameter modification and it takes a long time to initiate a TCHFhas no impact on the TCHH handover. Thus, network Versions earlier than equipment. congestion cannot be relieved in time. BSC6900 V900R011
Radio
HUAWEI II Handover
0~255
dB
None
95 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "NOAMRFULLTOHALFH Read & OALLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, MSs at the edge of the cell can also meet the handover condition, thus affecting the voice quality. If this parameter is set to a smaller value, only MSs in the center of the cell can The parameter modification meet the handover condition. Thus, the has no impact on the network congestion cannot be relieved in Versions earlier than equipment. time. BSC6900 V900R011
Radio
BSC6900
HUAWEI II Handover
0~7
None None
0 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "NOAMRFULLTOHALFH Read & OALLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, MSs with poor quality can also meet the handover condition, thus affecting the voice quality. If this parameter is set to a smaller value, The parameter modification little MSs can meet the handover has no impact on the condition. Thus, the network congestion Versions earlier than equipment. cannot be relieved in time. BSC6900 V900R011 If this parameter is set to a greater value, the calls cannot be handed over to TCHH in a short period when the traffic volume is increased greatly. Thus, the network congestion cannot be relieved in time. If this parameter is set to a smaller value, The parameter modification calls are handed over to TCHH has no impact on the unnecessarily, thus causing MOS loss of Versions earlier than equipment. the customer. BSC6900 V900R011
Radio
BSC6900
HUAWEI II Handover
0~100
per cent
None
85 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "NOAMRFULLTOHALFH Read & OALLOW" is set to YES. Write
Not involved
Not involved
None
Radio
BSC6900
HUAWEI II Handover
0~255
dB
None
14 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "NOAMRFULLTOHALFH Read & OALLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, only MSs in the center of the cell use the TCHH, thus leading to timeslot waste and the network congestion cannot be relieved in time. If this parameter is set to a smaller value, MSs at the edge of the cell The parameter modification and with poor quality also cannot be has no impact on the handed over to the TCHF, thus affecting Versions earlier than equipment. the voice quality. BSC6900 V900R011
Radio
HUAWEI II Handover
0~255
dB
None
103 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "NOAMRFULLTOHALFH Read & OALLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, MSs at the edge of the cell and with poor quality also cannot be handed over to the TCHF, thus affecting the voice quality. If this parameter is set to a smaller value, only MSs in the center of the cell use the The parameter modification TCHH, thus leading to timeslot waste and has no impact on the the network congestion cannot be relieved Versions earlier than equipment. in time. BSC6900 V900R011
Radio
BSC6900
HUAWEI II Handover
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "NOAMRFULLTOHALFH Read & OALLOW" is set to YES. Write
Not involved
Not involved
None
Radio
BSC6900
HUAWEI II Handover
0~7
None None
2 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "NOAMRFULLTOHALFH Read & OALLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, handover cannot be triggered even when the quality is poor, thus affecting the voice quality; if this parameter is set to a The parameter modification smaller value, handover is triggered even has no impact on the when the quality is good, thus the network Versions earlier than equipment. congestion cannot be relieved in time. BSC6900 V900R011
Radio
BSC6900
HUAWEI II Handover
0~100
per cent
None
25 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "NOAMRFULLTOHALFH Read & OALLOW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, calls are handed over to TCHH unnecessarily, thus causing MOS loss of the customer; if this parameter is set to a The parameter modification greater value, TCHF-TCHH handover is has no impact on the performed only when the traffic volume is Versions earlier than equipment. high, thus network congestion may occur. BSC6900 V900R011
Radio
NODEBID
NodeB ID
BSC6900
Node ID of the adjacent node to be added. The parameter is valid when ADD Adjacent ADJNODE(Mand node type is atory) set to IUB.
None
None
NODET
BSC6900
ADD ADJNODE(Mand Adjacent atory) node type Decisions of no-downlink measurement report handovers can be made only when the number of consecutive no-downlink measurement reports in the current call is SET no larger GCELLHOEMG( than this Optional) parameter.
None
None
Interval Type 0~65535 IUB(Iub Interface), IUR(Iur Interface), IUCS(Iu-CS Interface), IUPS(Iu-PS Interface), UNI_AAL2SWIT CH(the adjacent node of the ATM switch on the Iub interface), NNI_AAL2SWIT CH(the adjacent node of ATM switch on Iur or Iu-CS interface), ABIS(Abis Interface), A(A Interface), BSC(Ater Interface on Enumeration BSC), TC(Ater Type Interface on TC)
0~65535
None None
None
When the value of "NODET" in "ADD Adjace ADJNODE" is set to IUB, Read & nt node this parameter is valid. Write
Not involved
Not involved
Not involved
None
Transpor t
None None
None
Not involved
Not involved
Not involved
None
Transpor t
GBFD110601 GBFD510501
0~64
None None
8 Cell
This parameter is valid only when "NODLMRHOEN" in "SET GCELLHOEMG" is Read & set to YES. Write
Not involved
Not involved
None
Radio
BSC6900
Whether to enable the nodownlink measurement GBFDSET report 110601 GCELLHOEMG( handover GBFDOptional) algorithm. 510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page194of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
BSC6900
When a certain number of nodownlink measurement reports are received consecutively and the uplink receive quality is no smaller than this parameter, no-downlink measurement report emergency handovers are triggered. Nodownlink measurement report emergency handovers choose the inter-cell handover mode preferentially; SET however, if GCELLHOEMG( no candidate Optional) cells are Normal output capacity of the battery group in specific discharging conditions (such as discharge rate, temperature, and final voltage). Generally, the parameter is based on 10SET hour BTSPMUBP(Opti discharge onal) rate. Whether to enable the III power control algorithm for Non-AMR calls. If enabled, power SET control is GCELLPWR3(O performed on ptional) Non-AMR
GBFD110601 GBFD510501
0~70
None None
50 Cell
This parameter is valid only when "NODLMRHOEN" in "SET GCELLHOEMG" is Read & set to YES. Write
Not involved
Not involved
None
The handover decision is allowed only when the uplink receive quality is greater than or equal to the value of this parameter. Therefore, if this parameter is The parameter modification set to a greater value, the handovers due has no impact on the to no-downlink measurement report Versions earlier than equipment. cannot be triggered. BSC6900 V900R011
Radio
GBFD111202
O&M of BTS
1~1000
Ah
100 None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GBFD117601
Enumeration Type
NONDRXPE RIOD
Non-DRX Period
BSC6900
SET Period when GCELLNWCTRL the cell is in MSRPARA(Opti the non-DRX GBFDonal) state. 119107 When the ANT_A tributary antenna current abnormally check mode is set to Mode 3, the parameter ALD Current Prompt Alarm is checked by periodical pulse. The periodical pulse consists of antenna overcurrent duration and normal current duration. This parameter is the ANT_A tributary antenna SET normal BTSRXUBP(Opti current MRFDonal) duration. 210304 When the ANT_B tributary antenna current abnormally check mode is set to Mode 3, the parameter ALD Current Prompt Alarm is checked by periodical pulse. The periodical pulse consists of antenna overcurrent duration and normal current duration. This parameter is the ANT_B tributary antenna SET normal BTSRXUBP(Opti current MRFDonal) duration. 210304 Whether to SET allow the cell GCELLNC2PAR normal A(Optional) reselection. Normal work SET temperature BTSCABPARA( threshold of Optional) the cabinet
Enumeration Type
OFF(Not Allowed), ON(Allowed) NODRX(NODRX ), 0.24sec(0.24sec ), 0.48sec(0.48sec ), 0.72sec(0.72sec ), 0.96sec(0.96sec ), 1.20sec(1.20sec ), 1.44sec(1.44sec ), 1.92sec(1.92sec
OFF, ON
None None
ON
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
None
0.24sec
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Faulty Management
100~10000
ms
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
B ALD Cur-Minor NormalCurDu Alarm N-Cur rB Duration Cell Normal NORMALRE Reselection SELALLOW Allowed
BSC6900
100~10000
ms
None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
BSC6900
GBFD116201
Enumeration Type
NORTHD
BSC6900
GBFD111202
O&M of BTS
PERMIT
Cell
500 BTS
None The value of this parameter must be 8C smaller than "Derating TEMP Threshold".
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Equipme nt
BSC6900
NOTRASP
BSC6900
Whether to discard paging messages without TMSIs and all-cell paging messages that considerably SET increase the OTHSOFTPARA load on the GBFD(Optional) BSC system 111705 Maximum number of measurement periods in which there is no traffic. If the number of measurement periods in which there is no traffic reaches this parameter, the BTS reports an alarm SET indicating GTRXRLALM(O that there is GBFDptional) no traffic. 111004 If the BTS works in fallback mode and uplink VGCS connection is idle for a period specified by this parameter, the BTS disables the VGCS connection automatically . This parameter is valid only for useroriginated VGCS calls SET and is invalid BTSFALLBACK( for fixed GBFDOptional) VGCS calls. 510309
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
CLOSE
BSC69 00 None
Not involved
Not involved
None
Equipme nt
1~255, step:5
min
None
48 TRX
This parameter is valid only when "WLNKALMFLAG" is set Read & to YES. Write
Not involved
Not involved
None
Equipme nt
NOVGCSTI ME
BSC6900
10~255
None
30 BTS
Not involved
Not involved
This paramete r is supporte d only by the following dualdensity BTSs: BTS3012 , BTS3006 C, BTS3012 AE, BTS3012 II, and The parameter modification BTS3002 has no impact on the E. equipment. None
Equipme nt
6/9/2013
Page195of316
150682621.xls.ms_office
Security Level:
NQUERIES
Number of TRC TRACERT IPADDR(Optiona packets sent l) to each TTL None For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. This parameter indicates the number of enhanced measurement reports received on a signaling channel used to filter the SET NBR_RCVD_ GCELLHOFITPE BLOCKS GBFDN(Optional) value. 117501 For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. This parameter indicates the number of enhanced measurement reports received on a service channel used to filter the SET NBR_RCVD_ GCELLHOFITPE BLOCKS GBFDN(Optional) value. 117501 Network resource indication that specifies ADD a CN node in NRIMSCMAP(M the MSC GBFDandatory) pool 117401 Identifies the mapping relation from the NRI to the SGSN ADD uniquely with NRISGSNMAP( the operator GBFDMandatory) name. 119701 Controls the values of the FDD_Indic0 field, the NR_OF_FDD _CELLS field, and the FDD_Cellinfo rmation field in 2quater and MI when 3G neighboring cells with scrambling code 0 are present. When this parameter is set to YES, FDD_Indic0 is set to 1, the NR_OF_FDD _CELLS count does not include cells with scrambling code 0, and FDD_Cellinfo SET rmation also OTHSOFTPARA does not GBFD(Optional) include cells 111101 ADD NSE(Mandatory) ADD NSVC(Mandator y) ADD NSVLLOCAL(Ma ndatory) ADD NSVLREMOTE( Mandatory) ADD PTPBVC(Mandat ory) BLK PTPBVC(Mandat Identifies a GBFDory) unique NSE. 119001 ADD GCELLQUICKS GBFDETUP(Optional) NSE identifier 119001 For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. This parameter indicates the number of measurement reports received on signaling channels used for the filtering of GBFDSET neighboring 110601 GCELLHOFITPE cell signal GBFDN(Optional) strength. 510501 Whether the cell is located SET in the south GCELLLCS(Opti latitude or GBFDonal) north latitude 115402 NSVC ID, identifies a unique NSVC. This ID must be ADD negotiated NSVC(Mandator with the peer GBFDy) SGSN. 510002 ADD NSVC(Mandator y) NSVC index, BLK identifies a NSVC(Mandator unique y) NSVC.
None
1~10
None
3 None
None
Not involved
Not involved
Not involved
None
Transpor t
NRBSDCCH FFLEN
BSC6900
ms
None
2 Cell
This parameter is valid only when "MEASURETYPE" in "SET GCELLCCUTRANSYS" is set to EnhMeasReport.
Not involved
Not involved
None
Radio
ms
None
6 Cell
This parameter is valid only when "MEASURETYPE" in "SET GCELLCCUTRANSYS" is set to EnhMeasReport.
Not involved
Not involved
None
Radio
NRI
NRI Value
BSC6900
MSC Pool
0~1023
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
NRI
NRI Value
BSC6900
SGSN Pool
0~1023
None None
None
BSC
None
Not involved
Not involved
None
Radio
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Radio
NSEI
NSE Identifier
BSC6900
0~65534
None None
None
NSE
None
Not involved
Not involved
Not involved
NSEI
NSE identifier
BSC6900
0~65534
None None
None
Cell
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
NSIGSTRFL TLEN
BSC6900
ms
None
2 Cell
This parameter is valid only when "HOCTRLSWITCH" in "SET GCELLHOBASIC" is set to HOALGORITHM2.
Not involved
Not involved
None
This parameter should be set to a small The parameter modification value because the signaling channel has no impact on the seizure duration is shorter than the traffic equipment. channel seizure duration for the MS.
Radio
NSLATI
NS Latitude
BSC6900
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
NSVCI
NSVC Identifier
BSC6900
Gb Over FR
0~65534
None None
None
NSVC
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Equipme nt
NSVCIDX
NSVC Index
BSC6900
GBFD510002
Gb Over FR
0~1023
None None
None
NSVC
None
Not involved
Not involved
Not involved
None
Equipme nt
6/9/2013
Page196of316
150682621.xls.ms_office
Security Level:
NTDI
NTDO
If the inlet temperature is between "High Temperature Critical Point" and "Low Temperature Critical Point" and the difference between the inlet temperature and the ambient temperature reaches the value of this parameter, the temperature control system controls the difference between the inlet and outlet temperatures as well as SET the BTSDHEUBP(Op difference tional) between the If the outlet temperature is between "High Temperature Critical Point" and "Low Temperature Critical Point" and the difference between the outlet temperature and the inlet temperature reaches the value of this parameter, the temperature control system controls the difference between the inlet and outlet temperatures as well as the SET difference BTSDHEUBP(Op between the tional) inlet
GBFD111202
O&M of BTS
0~30
9 BTS
None
Not involved
Not involved
None
Equipme nt
GBFD111202
O&M of BTS
0~30
16 BTS
None
Not involved
Not involved
None
Equipme nt
NUM
BSC6900
Fault NodeB number when restore interface SET board to FACFG(Mandato judge fault MRFDry) port. 210304 Number of retransmissio ns of the VGCS SET UPLINK GCELLGSMR(O GRANT GBFDptional) message 510301 Ratio of the minimum guarantee bandwidth of the OAM SET stream to the ETHPORT(Optio port nal) bandwidth None
Faulty Management
0~10
None None
None
None
None
Not involved
Not involved
Not involved
None
Equipme nt
NY2
Ny2
BSC6900
1~255
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
None
0~100
per cent
None
None
Ethernet port
If the value is too big, will interrupt service until it is set to the normal value.
If this paramete r is set to a larger value, the bandwidt h of the The parameter modification service is has no impact on the smaller. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None
Transpor t
BSC6900
0~100
per cent
PPP 0 link
None
BSC6900
Transpor t
BSC6900
Minimum guarantee GBFDADD bandwidth of 118611 MPGRP(Optiona the OAM GBFDl) stream 118622 Minimum guarantee ADD bandwidth of IPLOGICPORT( the OAM Optional) stream None Ratio of the minimum guarantee bandwidth of the OAM ADD stream to the ETHTRK(Option port MRFDal) bandwidth 210103 DSCP value of the OAM stream. The data of the OAM stream are not added to queues 1 to 6 for transmission. Instead, the data of the OAM stream SET is added to QUEUEMAP(Ma the dedicated ndatory) queue. None
0~100
per cent
MP 0 group
None
Not involved
Not involved
Transpor t
BSC6900
None
0~100
per cent
IP logical 0 port
None
Not involved
Not involved
None
Transpor t
BSC6900
Link aggregation
0~100
per cent
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The transmiss ion priority of the service is affected if the queue DSCP value of the port is modified. The transmiss ion priority of the service is affected if the queue DSCP value of the port is modified.
None
Transpor t
BSC6900
None
0~63
None None
None
Port queue
None
Not involved
Not involved
Transpor t
OAMMINBW OAM flow min KEY bandwidth switch OBJECTTYP E Operate Object OBJECTTYP E Object Type
BSC6900
BSC6900
BSC6900
Minimum guarantee bandwidth switch of the OAM stream None Operation object Type of the object MRFD210602 GBFD111207
OFF(OFF), ON(ON) OFF, ON SITE(SITE), CELL(CELL), BOARD(BOARD SITE, CELL, ) BOARD BYCELL(By CELL), BYTRX(By by TRX) BYCELL, BYTRX ALL(Shield alarm id), BOARD(Shield by board), PORT(Shield by port), DSP(Shield by dsp)
None None
None
Port queue
None
Not involved
Not involved
None None
None
None
None
Not involved
Not involved
None
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
BSC6900 V900R011
OBJTP
Object Type
BSC6900
Shield type of the alarm. "ALL" indicates one shield type instead of all MRFDtypes. 210304
Faulty Management
Enumeration Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
OBJTP
Object Type
BSC6900
MRFD210304
Faulty Management
Enumeration Type
BTS(BTS), CELL(CELL), LOC(LOC), BOARD(BOARD BTS, CELL, LOC, ), PORT(PORT) BOARD, PORT
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
OBJTYPE
Object Type
BSC6900
Object index types used when SET commands MRFDFHO(Mandatory) are executed 210301
Configuration Management
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page197of316
150682621.xls.ms_office
Security Level:
BSC6900
When the PDCHs are insufficient, the streaming service with high priority can preempt the PDCHs that are seized by the streaming service with low priority. After the PDCH resource preemption, the streaming service with low priority initiates the QoS negotiation with the SGSN. If the QoS negotiation fails, or if all the PDCHs are SET preempted, GCELLPSOTHE then the RPARA(Optional streaming GBFD) service with 119901 SET GCELLHOIUO( Optional) Whether to allow overlayto-underlay GBFDhandovers 113201
Streaming QoS(GBR)
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
OFF
Cell
None This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
OLTOULHO ALLOW
OL to UL HO Allowed
BSC6900
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
Not involved
Not involved
None
Radio
OMLBKUP
BSC6900
Whether to SET enable OML BTSOMLBACKU backup for P(Optional) the BTS
GBFD113728
OML Backup
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
BTS
None
Not involved
Not involved
OmlDetectTi me
BSC6900
This parameter specifies the detecting time of AbisSET Bypass site OTHSOFTPARA OML when it GBFD(Optional) is broken. 116601 Differentiated service code SET of the BTSABISPRIMA specified P(Optional) OML None The summation of average downSET bandwidth of BTSBWPARA(M OML&ESL GBFDandatory) link in BTS. 111202 The summation of average upSET bandwidth of BTSBWPARA(M OML&ESL GBFDandatory) link in BTS. 111202 Service SET priority of the BTSABISPRIMA specified P(Optional) OML None Whether periodic SAMB frames are actively sent on the OML in the reverse ring in satellite transmission mode when the link in the forward ring in terrestrial SET transmission OTHSOFTPARA mode is (Optional) normal Priority of services on the OML. The operation and maintenance link (OML) is used to transfer the OM information between the BSC and BTS. This parameter SET indicates the BSCSRVPRI(Op priority of tional) services on
Abis Bypass
4~255
None
10 BSC
None
Not involved
Not involved
The parameter modification has no impact on the None equipment. None If the paramete r value is set relatively small, the sensitivity for detecting the OML when it is broken is improved . When the paramete r value is set too small and if the link is intermitte ntly disconne cted, misjudge ments may occur to the testing results. The parameter modification If the has no impact on the paramete equipment. None The paramete r cannot be modified. Not involved
Equipme nt
BSC6900 V900R011
Equipme nt
OMLDSCP
OML DSCP
BSC6900
None
0~63
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
OMLESLDL
OMLESLDL
BSC6900
O&M of BTS
0~256
kbit/s
64 None
Not involved
Not involved
None
BSC6900 V900R011
Radio
OMLESLUL
OMLESLUL
BSC6900
O&M of BTS
0~256
kbit/s
64 None
Not involved
Not involved
None
BSC6900 V900R011
Radio
OMLPRI
OML Priority
BSC6900
None
0~7
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
GBFD117803
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
OFF
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
OMLSP
BSC6900
GBFD118605
IP QOS
0~7
None None
None
BSC69 00 None
Not involved
Not involved
None
Transpor t
BSC6900
OMLWS
OMUIP
BSC6900
OMUMASK
BSC6900
SET BTSABISPRIMA Specified P(Optional) OML Vlan Id Size of the SET OML/ESL/E BTSLAPDWS(O ML LAPD ptional) window External virtual IP ADD address of EMSIP(Optional) Subnet the OMU mask of the OMU in the ADD external EMSIP(Optional) network EXP LOG(Optional) ADD OP(Mandatory) ULK USR(Mandatory) ADD BTSOP(Mandato Account of ry) the operator Code of the original signaling point (OSP) in the signaling network. In the signaling network, each signaling point is ADD identified by GCELLOSPMAP a signaling (Mandatory) point code.
None
None
2~4094
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
GBFD118601
Abis over IP
0~96
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
None
None
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
None
None
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
OP
Operator
BSC6900
GBFD111203 MRFD210305
String Type
None
1~32 characters
None None
None
RNC
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
OPC
OSP Code
BSC6900
MRFD210301 GBFD118701
1~16777215
None None
None
BSC69 00 None
Cell
Before modifying this paramete r, you must deactivat e the cells The cell should be activated bound to after the parameter the OPC. modification. None
Equipme nt
OPC
OSP Code
BSC6900
Code of the signaling point of the local office in the signaling network. In the signaling network, each signaling point has a correspondin g signaling GBFDpoint code. 111202
O&M of BTS
1~16777215
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
OPCIDX
OPC Index
BSC6900
ACIC(Mandatory ) ADD AE1T1(Mandator y) OPC index Primary operator or secondary operator Index of the
GBFD111803
0~4
None None
None
E1/T1 link
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved Primary operator index must be 0.
None
Transpor t
BSC6900
GBFD118701
RAN Sharing
Enumeration Type
PRIM, SEC
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
OPINDEX
Operator Index
BSC6900
BSC6900
operator. This parameter ADD uniquely GCNOPERATO identifies an R(Mandatory) operator. Operator ADD index set to GCBSADDR(Ma which the ndatory) CBC belongs
GBFD117401
MSC Pool
GBFD118701
RAN Sharing
Interval Type 0~3 OPINDEX0, OPINDEX1, Bit Field OPINDEX2, Type OPINDEX3
None None
None
BSC69 00 None
Not involved
Not involved
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page198of316
150682621.xls.ms_office
Security Level:
OPMODE
Operation Mode
BSC6900
It is one key filed of identifying A interface CIC status and indicates the alignment BLK mode of A ACIC(Mandatory interface GBFD) circuit. 111803 It is one key filed of identifying Pb interface CIC status and BLK indicates the PBCIC(Mandator Pb interface GBFDy) CIC. 111203
Enumeration Type
None None
None
E1/T1 link
None
Not involved
Not involved
1. The block of A interface must be configure d. 2. If A over IP is configure d, the configura tion does not support the The parameter modification operation has no impact on the . equipment. None
Equipme nt
OPMODE
Operation Mode
BSC6900
O&M of BSC
Enumeration Type
None None
None
PBCIC None
Not involved
Not involved
Not involved
OPMODE
Operation Mode
BSC6900
It is one key filed of identifying Ater interface timeslot status and indicates the alignment BLK mode of Ater ATERE1T1(Man interface GBFDdatory) circuit. 111801
None None
None
E1/T1 link
None
Not involved
Not involved
OPMODE
Operation Mode
BSC6900
OPNAME
Operator Name
BSC6900
BSC6900
It is one key filed of identifying A interface timeslot status and indicates the alignment BLK mode of A AE1T1(Mandator interface y) circuit. ADD GCNNODE(Man datory) ADD GCNOPERATO R(Mandatory) ADD GCELL(Optional ) ADD GEXT2GCELL( Optional) ADD GEXT3GCELL( Optional) ADD NSE(Mandatory) ADD PCU(Mandatory) Name of the ADD operator. SGSNNODE(Ma This ndatory) parameter ADD uniquely NRISGSNMAP( identifies an Mandatory) operator. Channel assignment policies used when TCHs are assigned in an IUO cell: SysOpt: The system selects the preferentiallyassigned service layer and assigns channels according to the measurement reports on SDCCHs; USubcell: preferentially assigns the TCHs on the underlay; OSubcell: preferentially assigns the TCHs on the overlay; NoPrefer: use the SET normal GCELLHOIUO( channel Optional) assignment
GBFD111803
Enumeration Type
None None
None
E1/T1 link
None
Not involved
Not involved
The paramete r cannot be modified. 1. The block of Ater interface must be configure d. 2. If the BSC is configure d to the integrate d BMTC or A over IP is configure d, the configura tion does not support the operation . 3. If the block operation is applicabl e to only the ATERTS of the BM 1. The block of A interface must be configure d. 2. If the BSC is configure d to the integrate d BMTC or A over IP is configure d, the configura tion does not support the operation . 3. If the block operation is applicabl e to only the AE1T1 of the BM subrack.
Not involved
None
Transpor t
Transpor t
Transpor t
GBFD118701
RAN Sharing
String Type
None
0~255 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
GBFD113201
SysOpt(System optimization), OSubcell(Overlai d subcell), USubcell(Underla id subcell), NoPrefer(No SysOpt, OSubcell, preference) USubcell, NoPrefer
None None
SysOpt
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
Radio
OPTILEVTH RES
Assign-optimumlevel Threshold
BSC6900
Preferentially assigns channels on the overlay when the uplink receive level on the SDCCH is no smaller than "Assignoptimumlevel Threshold" and the TA is smaller than "TA Threshold of Assignment Pref"; otherwise, assigns channels on the underlay to ensure successful channel GBFDassignment. 113201 Preferentially assigns channels on the overlay when the uplink receive level on the SDCCH is no smaller than "Assignoptimumlevel Threshold" and the TA is smaller than "TA Threshold of Assignment Pref"; otherwise, assigns channels on the underlay to ensure successful channel GBFDassignment. 113201
0~63
dB
None
35 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell and "OPTILAYER" is set to SysOpt.
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the underlaid The parameter modification subcell; if this parameter is set to a has no impact on the smaller value, assignment success rate Versions earlier than equipment. may be decreased. BSC6900 V900R011
Radio
BSC6900
0~255
bit
None
63 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell and "OPTILAYER" is set to SysOpt.
Not involved
Not involved
None
If this parameter is set to a greater value, assignment success rate may be The parameter modification decreased; if this parameter is set to a has no impact on the smaller value, congestion may occur in Versions earlier than equipment. the underlaid subcell. BSC6900 V900R011
Radio
6/9/2013
Page199of316
150682621.xls.ms_office
Security Level:
OPTL
TRX Priority
BSC6900
Channel assignment priority of the TRX. If this parameter is less, the TRX priority level is higher. Under the same conditions, the channels in a highpriority TRX are assigned before the SET channels in a GTRXDEV(Optio low-priority GBFDnal) TRX. 111005
Enumeration Type
None None
None
TRX
Not involved
Not involved
None
Radio
OPTM
BSC6900
SET OPT(Optional)
None
None
Enumeration Type
SDH, SONET
SDH, SONET
None None
None
Board
None
BSC6900
The setting of this paramete r must be consisten t with The parameter modification that on has no impact on the the peer. equipment. None
Equipme nt
OPTP
Operation Type
BSC6900
OPTYPE
Operate Type
BSC6900
SWP BTSBRD(Manda Type of the GBFDtory) operation 111202 The operation SET type can be BTSFORBIDTS( "FORBID" or GBFDMandatory) "RESTORE". 111202 Iur-g signaling point index of an internal RNC in GU MRFDmode 211402 If "Port Type" is set to "TOPEXTOU TPORT", this parameter determines the extended E1/T1 port through which the timeslots on the source E1/T1 port are used by other boards. If "Port Type" is set to "TOPEXTINP ORT", this parameter is MRFDset to all 1s. 211501
O&M of BTS
Enumeration Type
MANUAL(MANU AL), FORCED(FORC ED), CLEARALARMA( MANUAL, FORCED, CLEARALARMA) CLEARALARMA None None FORBID(Forbid), RESTORE(Rest ore) FORBID, RESTORE None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The transport path should be re-established after the parameter modification.
BSC6900 V900R011
Equipme nt
O&M of BTS
Enumeration Type
None
BTS
None
BTS
None
None
Radio
OPX
OPX
BSC6900
{0~4}
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
ORIPORT
BSC6900
OT
Operation type
BSC6900
OTHERFRE Q
Other Frequency
BSC6900
ADD BTSTOPCONFI G(Mandatory) LOD PATCH(Optional ) Operation CON type of the MRFDPATCH(Optional command. 210401 Ordinary frequency. Multiple frequencies are separated by "&". For example, "22&33&44& 55" are allocated to ADD TRXs in GCELLQUICKS ascending GBFDETUP(Optional) order. 510701 One of the parameters that decide the underlay and overlay areas in an enhanced IUO cell. The underlay and overlay areas are decided by "OtoU HO Received Level Threshold", "UtoO HO Received Level Threshold", "RX_QUAL Threshold", "TA Threshold", and "TA Hysteresis" GBFDtogether. 113201
IP-Based 2G/3G CoTransmission on Base Station Side Interval Type 0~7 0~7 One_touch(execu BSC/RNC te on all boards Software Enumeration in all subracks), One_touch, Management Type Step_by_Step Step_by_Step
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
None
None
Not involved
Not involved
None
Equipme nt
String Type
None
1~200 characters
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
0~63
dB
None
20 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to ENIUO.
Not involved
Not involved
None
Radio
OUTASSOP TEN
BSC6900
Whether to assign channel requests initiated in the underlay subcell to the overlay or underlay subcells according to "UL Subcell General Overload Threshold". If the load of the underlay is higher than "UL Subcell General Overload Threshold", incoming calls in the underlay subcell will be preferentially SET assigned to GCELLHOEDBP the overlay GBFDARA(Optional) subcell. 114402 The timer is used to set the time when the BSC waits for a handover success message after a handover command is sent in an outgoing BSC handover. If the timer expires, the outgoing SET BSC GCELLTMR(Opt handover ional) fails. The timer is used to set the time when the BSC waits for an HO REQ ACK message after a Handover Request message is reported in an outgoing BSC handover. If the timer expires, the outgoing SET BSC GCELLTMR(Opt handover ional) fails. Whether to use external 2G neighboring cells as the SET target cells GCELLHOAD(O of load ptional) handovers
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell.
Not involved
Not involved
None
Radio
OUTBSCHO CLEARTIME R T8
BSC6900
GBFD110601 GBFD510501
500~60000
ms
None
None
Cell
None
Not involved
Not involved
If this paramete r is set to a greater value, too many channel resource s are occupied and the congestio n occurs. If this paramete r is set to a smaller value, the handover success The parameter modification rate may has no impact on the fall. equipment. None If this paramete r is set to a greater value, too many channel resource s are occupied and the congestio n occurs. If this paramete r is set to a smaller value, the handover success The parameter modification rate may has no impact on the fall. equipment. None
Radio
OUTBSCHO CMDTIMER
T7
BSC6900
GBFD110601 GBFD510501
500~60000
ms
None
None
Cell
None
Not involved
Not involved
Radio
OutBscLoad HoEn
BSC6900
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid only when "LOADHOEN" in "SET GCELLHOBASIC" is set Read & to YES. Write
Not involved
Not involved
None
Radio
6/9/2013
Page200of316
150682621.xls.ms_office
Security Level:
When the load of the underlay subcell is higher than this parameter, some of the calls in the underlay subcell will be switched to the overlay subcell, and channels in the overlay subcell will be preferentially assigned to calls initiated in the SET underlay GCELLHOEDBP subcell as GBFDARA(Optional) well. 114402 Power overload threshold for triggering outgoing handover from the TRX under the prerequisite that the power amplifier of the TRX provides the maximum output power. If the power overload exceeds this parameter, the TRX triggers outgoing SET handover due GTRXDEV(Optio to GBFDnal) underpower. 111005 Lower threshold of the overlay level during overlay-tounderlay handovers. When the receive level of an MS is higher than this threshold, the MS can be SET switched to GCELLHOEDBP the underlay GBFDARA(Optional) subcell. 114402 Whether to switch some of the calls in the underlay subcell to the overlay when the load of the underlay SET is higher than GCELLHOEDBP this ARA(Optional) parameter If the underlay load is higher than "UL Subcell Serious Overload Threshold", the underlayto-overlay handover period subtracts a value that equals this threshold from "UL Subcell Load Hierarchical SET HO Periods" GCELLHOEDBP every ARA(Optional) second. When the load of the underlay subcell exceeds "UL Subcell General Overload Threshold", all the calls that are using this cell as the serving cell generate handover requests at the same time, which will suddenly increase the load of the BSC and possibly cause congestion in the overlay subcell, thus causing the handovers to fail. To solve this problem, SET the BSC GCELLHOEDBP uses the ARA(Optional) hierarchical Level step during underlay-tooverlay SET hierarchical GCELLHOEDBP load ARA(Optional) handovers
0~100
per cent
None
80 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell. The following condition must be met: "OUTSERIOVERLDTHR ED" > "OUTGENOVERLDTHR ED" > "OUTLOWLOADTHRED" Read & . Write
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the overlaid The parameter modification subcell; if this parameter is set to a has no impact on the smaller value, congestion may occur in Versions earlier than equipment. the underlaid subcell. BSC6900 V900R011
Radio
BSC6900
0~50
None
15 TRX
None
Not involved
Not involved
None
The parameter modification If the value of this parameter is set too has no impact on the small, frequent handovers are likely to equipment. occur.
Equipme nt
BSC6900
0~63
dB
None
25 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell.
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the overlaid The parameter modification subcell; if this parameter is set to a has no impact on the smaller value, congestion may occur in Versions earlier than equipment. the underlaid subcell. BSC6900 V900R011
Radio
OUTLOADH OENABLE
Load HO Allowed
BSC6900
GBFD114402
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell.
Not involved
Not involved
None
Radio
OUTLOADH OMODPERI
BSC6900
GBFD114402
1~255
None
1 Cell
This parameter is valid only when "OUTLOADHOENABLE" Read & is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the overlaid The parameter modification subcell in a short time; if this parameter is has no impact on the set to a smaller value, congestion in the Versions earlier than equipment. underlaid subcell is difficult to be relieved. BSC6900 V900R011
Radio
OUTLOADH OPERIOD
BSC6900
GBFD114402
1~255
None
5 Cell
This parameter is valid only when "OUTLOADHOENABLE" Read & is set to YES. Write This parameter is valid only when "OUTLOADHOENABLE" is set to YES and "IUOTP" in "ADD GCELL" is set to Read & EDB_cell. Write
Not involved
Not involved
None
If this parameter is set to a greater value, congestion in the underlaid subcell is difficult to be relieved; if this parameter is The parameter modification set to a smaller value, congestion may has no impact on the occur in the overlaid subcell in a short Versions earlier than equipment. time. BSC6900 V900R011
Radio
OUTLOADH OSTEP
BSC6900
GBFD114402
0~63
dB
None
5 Cell
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the overlaid The parameter modification subcell in a short time; if this parameter is has no impact on the set to a smaller value, congestion in the Versions earlier than equipment. underlaid subcell is difficult to be relieved. BSC6900 V900R011
Radio
BSC6900
When the load of the underlay subcell is lower than this parameter, some of the calls in the overlay subcell will be switched to the underlay subcell, and channels in the underlay subcell will be preferentially assigned to channel requests initiated in SET the overlay GCELLHOEDBP subcell as GBFDARA(Optional) well. 114402
Enhanced DualBand Network Interval Type 0~100 TS0, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
0~100
per cent
None
50 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell. The following condition must be met: "OUTGENOVERLDTHR ED" > "OUTLOWLOADTHRED" Read & . Write
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the underlaid The parameter modification subcell; if this parameter is set to a has no impact on the smaller value, congestion may occur in Versions earlier than equipment. the overlaid subcell. BSC6900 V900R011
Radio
OUTMASK
BSC6900
GBFD114701
SemiPermanent Connection
TS0, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
BSC
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
OUTPN
BSC6900
OUTPORTN O
BSC6900
OUTPORTT S
Out BSC Port No.. Number of the outgoing port of the DXX Number of the outgoing timeslot of the DXX
GBFD114701
SemiPermanent Connection
0~335
None None
None
BSC
None
Not involved
Not involved
Not involved
None
Transpor t
GBFD111203
O&M of BSC
0~15
None None
None
BTS
None
BTS
None
The BTS should be reset to validate the parameter modification. None The BTS should be reset to validate the parameter modification. None
Transpor t
GBFD111203
O&M of BSC
0~31
None None
None
BTS
None
BTS
None
Transpor t
6/9/2013
Page201of316
150682621.xls.ms_office
Security Level:
OUTPUT0
BSC6900
Level of the accessed alarm signal. If the alarm signal has high level, this parameter should be set to 0. Otherwise, it should be set GBFDto 1. 111202 Level of the accessed alarm signal. If the alarm signal has high level, this parameter should be set to 0. Otherwise, it should be set GBFDto 1. 111202 Level of the accessed alarm signal. If the alarm signal has high level, this parameter should be set to 0. Otherwise, it should be set GBFDto 1. 111202
O&M of BTS
Enumeration Type
HIGH(High), LOW(Low)
HIGH, LOW
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
OUTPUT1
BSC6900
O&M of BTS
Enumeration Type
HIGH(High), LOW(Low)
HIGH, LOW
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
OUTPUT2
BSC6900
O&M of BTS
Enumeration Type
HIGH(High), LOW(Low)
HIGH, LOW
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
OUTPUT3
BSC6900
OUTPUTPO WER
Output Power
BSC6900
OUTPUTPO WER1
Output Power
BSC6900
OUTPUTPO WERUNIT
BSC6900
Level of the accessed alarm signal. If the alarm signal has high level, this parameter should be set to 0. SET Otherwise, it BTSDTMUBP(O should be set ptional) to 1. Output power of the location group. For a location group that consists of MRRU or GRRU boards, the default output power is 15W. For a location group that consists of DRRU boards, the default output power varies with frequency bands. That is, when the frequency band is 850M/900M, the default output power is 18W; when the frequency ADD band is BTSLOCGRP(M 1800M/1900 andatory) M, the Output ADD power of the BTSLOCGRP(M location andatory) group Output ADD power unit of BTSLOCGRP(O the location ptional) group
GBFD111202
O&M of BTS
Enumeration Type
HIGH(High), LOW(Low)
HIGH, LOW
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
GBFD510104
Multi-site Cell
None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Equipme nt
GBFD510104
Multi-site Cell
dB
None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GBFD510104
Multi-site Cell
Enumeration Type
0_1dB(0.1dB), 0_1W(0.1W)
0.1dB, 0.1W
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
When the load of the underlay subcell is higher than this parameter, the underlayto-overlay load handover period subtracts a period that equals "Step Length of UL Subcell Load HO" from "UL Subcell Load Hierarchical HO Periods" every second, thus increasing SET the load GCELLHOEDBP handover GBFDARA(Optional) speed. 114402 Whether to report a cell out-ofservice alarm after a cell is GBFDout of service 111202
0~100
per cent
None
90 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell. The following condition must be met: "OUTSERIOVERLDTHR ED" > "OUTGENOVERLDTHR ED" > "OUTLOWLOADTHRED" Read & . Write
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the underlaid The parameter modification subcell; if this parameter is set to a has no impact on the smaller value, congestion may occur in equipment. the overlaid subcell. BSC6900 V900R011
Radio
O&M of BTS
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
OUTSN
BSC6900
ADD SEMILINK(Mand Out BSC Slot GBFDatory) No.. 114701 Slot No. of the Load Outlet interface board
SemiPermanent Connection
0~27
None None
None
BSC
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
OUTSN
BSC6900
GBFD111203
O&M of BSC
0~27
None None
None
None
None
Not involved
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
OUTSRN
BSC6900
ADD SEMILINK(Mand Out BSC GBFDatory) Subrack No.. 114701 Whether to select a 3G neighboring cell as the destination cell for load SET handover in GCELLHOINTE the RRATLDB(Optio connection nal) state When the Service Handover field in an ASS REQ message is 0, a direct retry process targeted at a 3G network is initiated. If the direct retry fails, the system decides whether to reassign channels for the current SET call based on OTHSOFTPARA this (Optional) parameter. If intersystem handover is enabled, the BSS decides whether to switch the current service to a 3G radio network according to the contents of the Service Handover cell in the ASS SET REQ or HO OTHSOFTPARA REQ (Optional) message.
SemiPermanent Connection
0~11
None None
None
BSC
None
Not involved
Not involved
Not involved
None
Transpor t
OutSysLoad HoEn
BSC6900
MRFD211402
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD114321
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
This parameter is valid only when BSC69 "OUTSYSSERVICEHOE Read & 00 N" is set to YES. Write
Not involved
Not involved
None
Radio
BSC6900
GBFD114321
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
CLOSE
BSC69 00 None
Not involved
Not involved
None
Radio
OUTTIMER
BSC6900
Validity period for the BSC to keep the load information about a 3G ADD neighboring GNRNC(Optional cell on the MRFD) RNC 211402
{1~60}
None
15
15 BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
OUTTSN
BSC6900
SemiPermanent Connection
0~255
None None
None
BSC
None
Not involved
Not involved
Not involved
None
Equipme nt
6/9/2013
Page202of316
150682621.xls.ms_office
Security Level:
BSC6900
Abnormally alarm raise threshold triggered by too heavy current of the ANT_A tributary antenna. When the actual current is higher than the configured value, the ALD Current Abnormally Alarm is triggered with the correspondin SET g alarm BTSRXUBP(Opti tributary No. MRFDonal) of 0. 210304 Abnormally alarm raise threshold triggered by too heavy current of the ANT_B tributary antenna. When the actual current is higher than the configured value, the ALD Current Abnormally Alarm is triggered with the correspondin SET g alarm BTSRXUBP(Opti tributary No. MRFDonal) of 0. 210304 Abnormally alarm raise threshold triggered by too heavy current of the RET tributary antenna. When the actual current is higher than the configured value, the ALD Current Abnormally Alarm is triggered with the correspondin SET g alarm BTSRXUBP(Opti tributary No. MRFDonal) of 0. 210304 Abnormally alarm clearance threshold triggered by too heavy current of the ANT_A tributary antenna. When the actual current is lower than the configured value, the ALD Current Abnormally SET Alarm BTSRXUBP(Opti clearance is MRFDonal) triggered w 210304 Abnormally alarm clearance threshold triggered by too heavy current of the ANT_B tributary antenna. When the actual current is lower than the configured value, the ALD Current Abnormally Alarm clearance is triggered with the correspondin SET g alarm BTSRXUBP(Opti tributary No. MRFDonal) of 0. 210304 Abnormally alarm clearance threshold triggered by too heavy current of the RET tributary antenna. When the actual current is lower than the configured value, the ALD Current Abnormally SET Alarm BTSRXUBP(Opti clearance is MRFDonal) triggered w 210304 When the ANT_A tributary antenna current abnormally check mode is set to Mode 3, the parameter ALD Current Prompt Alarm is checked by periodical pulse. The periodical pulse consists of antenna overcurrent duration and normal current duration. This parameter is the ANT_A tributary SET antenna overBTSRXUBP(Opti current MRFDonal) duration. 210304 When the ANT_B tributary antenna current abnormally check mode is set to Mode 3, the parameter ALD Current Prompt Alarm is checked by periodical pulse. The periodical pulse consists of antenna overcurrent duration and normal current duration. This parameter is the ANT_B tributary SET antenna overBTSRXUBP(Opti current MRFDonal) duration. 210304
Faulty Management
10~3500
mA
320 None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
10~3500
mA
320 None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
10~3500
mA
185
185 BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
10~3500
mA
280 None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
10~3500
mA
280 None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
10~3500
mA
155
155 BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
100~10000
ms
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
100~10000
ms
None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page203of316
150682621.xls.ms_office
Security Level:
Interval for the BTS transmitting overload messages to the BSC. This parameter is used to control the reporting frequency of overload messages by the channel and TRX. The overload can be the TRX processor overload, downlink CCCH overload, or AGCH overload. For details, see GSM Rec. GBFD08.58. 111003 Temperature threshold of the derating function of GBFDthe cabinet 111202
1~255
None
None
Cell
None The value of this parameter must be 8C greater than "Normal Work TEMP Threshold".
Not involved
Not involved
None
If this parameter is set to a smaller value, the BTS frequently reports overload indication messages to the BSC. As a result, the BSC frequently reports overload indication messages to the MSC and thus the MSC may initiate flow control. If this parameter is set to a greater value, the BTS sends overload indication messages to the BSC only when a large number of MSs access the network and when the system resources The parameter modification are insufficient. Therefore, the access has no impact on the requests on the RACH and all the Versions earlier than equipment. messages on the PCH are discarded. BSC6900 V900R011
Radio
OVERTHD
BSC6900
O&M of BTS
580 BTS
Not involved
Not involved
None
Equipme nt
P11
BSC6900
Threshold for critical flow control. When the usage of the CPU exceeds the threshold, the CPUS performs critical flow control for paging GBFDmessages. 111705
50~95
per cent
None
BSC69 90 00 None
Not involved
Not involved
If this paramete r is set to a greater value, the CPU may be overload ed. If this paramete r is set to a smaller value, the call loss The parameter modification rate is has no impact on the high. equipment. None If this paramete r is set to a greater value, the CPU may be overload ed. If this paramete r is set to a smaller value, the call loss The parameter modification rate is has no impact on the high. equipment. None If this paramete r is set to a greater value, the CPU may be overload ed. If this paramete r is set to a smaller value, the call loss The parameter modification rate is has no impact on the high. equipment. None If this paramete r is set to a greater value, the CPU may be overload ed. If this paramete r is set to a smaller value, the call loss The parameter modification rate is has no impact on the high. equipment. None
Equipme nt
P12
BSC6900
Threshold for major flow control. When the usage of the CPU exceeds the threshold, the CPUS performs major flow control for paging GBFDmessages. 111705
50~95
per cent
None
BSC69 85 00 None
Not involved
Not involved
Equipme nt
P13
BSC6900
Threshold for minor flow control. When the usage of the CPU exceeds the threshold, the CPUS performs minor flow control for paging GBFDmessages. 111705
50~95
per cent
None
BSC69 80 00 None
Not involved
Not involved
Equipme nt
P14
BSC6900
Threshold for slight flow control. When the usage of the CPU exceeds the threshold, the CPUS performs slight flow control for paging GBFDmessages. 111705
50~95
per cent
None
BSC69 75 00 None
Not involved
Not involved
Equipme nt
PaAdjVol
BSC6900
BSC6900
Whether to enable the multi-carrier intelligent voltage adjustment function. The intelligent voltage adjustment means to adjust the carrier transmitting frequency automatically according to SET the service BTSOTHPARA( power GBFDOptional) requirement. 111612 Whether to support the function of moving the packet assignment down to the BTS. To improve the access speed of the MS, after the packet assignment is moved down to the BTS, the BSC reserves the uplink resources for the BTS. The BTS obtains the channel request of the MB by analyzing the downlink acknowledge ment message SET sent by the GCELLPSOTHE MS. Then the RPARA(Optional BTS GBFD) allocates the 119202 CPU usage threshold for paging flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, paging flow control is triggered. This parameter is valid only SET when "Board FCMSGQTHD(O Class" is WRFDptional) "XPU". 040100 Packet queue usage threshold for recovery from paging flow control. When the average packet queue usage of sliding windows is lower than the threshold, paging flow control is stopped. This parameter is valid only SET when "Board FCMSGQTHD(O Class" is WRFDptional) "XPU". 040100 Whether to SET control WRFDFCSW(Optional) paging flow 040100
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
Enumeration Type
NO, YES
None None
NO
Cell
None
Not involved
None
Radio
PAGECTHD
BSC6900
Flow Control
30~100
per cent
None
75 Board
None
Not involved
Not involved
None
Equipme nt
PAGERTHD
BSC6900
Flow Control
30~100
per cent
None
65 Board
None
Not involved
Not involved
None
PAGESW
Flow Control
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
6/9/2013
Page204of316
150682621.xls.ms_office
Security Level:
BSC6900
GBFD111705
10~65535
None None
None
Cell
This parameter is valid when "ALLOWG2FLOWCTRA LGL" in the "SET BSCFCPARA" command Read & is set to YES. Write
Not involved
Not involved
None
Equipme nt
BSC6900
Lifetime of a paging message in the queue of the BTS. The setting of this parameter must be consistent with the setting of timer T3113 in the core network; otherwise, the efficiency of paging scheduling over the Um interface is reduced. It is recommende d that this parameter be set to a value one to two seconds shorter than timer T3113. The units of this parameter is GBFD250ms. 110303 Maximum number of paging messages allowed in a cell in a period
Paging
0~255
ms
None
255 Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
GBFD111705
10~65535
None None
None
Cell
This parameter is valid when "ALLOWG2FLOWCTRA LGL" in the "SET BSCFCPARA" command Read & is set to YES. Write
Not involved
Not involved
None
Equipme nt
PAGTIMES
Paging Times
BSC6900
For the BTS, this parameter is used to determine paging retransmissio ns. This parameter and the number of paging times configured in the MSC determine the number of paging retransmissio ns. The total number of paging times is approximatel y equal to the value of this parameter multiplied by the number of paging times configured in GBFDthe MSC. 110303
Paging
1~8
None None
None
Cell
None
Not involved
Not involved
None
Properly setting this parameter can increase the paging success rate. If this The parameter modification parameter is set to a greater value, has no impact on the paging overload may occur and the equipment. paging success rate may decrease.
Radio
PANDEC
PAN_DEC
BSC6900
PANINC
PAN_INC
BSC6900
This parameter sets the PAN_DEC value used by the counter N3102 of the MS. When the timer T3182 of the MS expires, the N3102 reduces the value of PAN_DEC. 0: the value of PAN_DEC is 0; 7: the value of PAN_DEC is 7; Value N indicates that PAN_DEC is N; Not use: SET this GCELLPSBASE( parameter is GBFDOptional) not used. 114101 This parameter sets the PAN_INC value used by the counter N3102 of the MS. When receiving the packet uplink acknowledge d or unacknowled ged message sent by the network (V(S) or V(A) increases), the MS increases the count (PAN_INC) of the counter N3102. 0: the value of PAN_INC is 0; 7: the value of PAN_INC is SET 7; Value N GCELLPSBASE( indicates that GBFDOptional) PAN_DEC is 114101 RAN_MAX value, the maximum value of the N3102. 4: the value of PAN_MAX is 4; 32: the value of PAN_MAX is 32. Value N indicates that PAN_DEC is N; Not use: this parameter is not used. Priority level at which the BSC switches off the power amplifier of the TRX when the BSC is allowed to switch off the power amplifier of the TRX. If this parameter is less, the priority level of the power amplifier of the TRX is higher. Patch number of the TMU board software Patch number of the TMU board software
GPRS
Enumeration Type
Pan_0(0), Pan_1(1), Pan_2(2), Pan_3(3), Pan_4(4), Pan_5(5), Pan_6(6), Pan_7(7), 255(not use)
None None
Pan_1
Cell
None
Not involved
Not involved
None
Radio
GPRS
Enumeration Type
Pan_0(0), Pan_1(1), Pan_2(2), Pan_3(3), Pan_4(4), Pan_5(5), Pan_6(6), Pan_7(7), 255(not use)
None None
Pan_2
Cell
None
Not involved
Not involved
None
Radio
PANMAX
PAN_MAX
BSC6900
GBFD114101
GPRS
Enumeration Type
Pan_4(4), Pan_8(8), Pan_12(12), Pan_16(16), Pan_20(20), Pan_24(24), Pan_28(28), Pan_32(32), 255(not use)
None None
Pan_20
Cell
None
Not involved
Not involved
None
Radio
PAOPTILEV EL
BSC6900
PatchNo
Patch No.
BSC6900
PatchNo1
Patch Number
BSC6900
SET GTRXDEV(Optio nal) SET BTSAUTODLDA CTINFO(Mandat ory) SET BTSAUTODLDA CTINFO(Mandat ory)
GBFD111602
Enumeration Type
None None
None
TRX
This parameter is valid only when "BSCDynSwitchTrxPAAll ow" in "SET BSCDSTPA","DYNOpen TrxPower" in "SET GCELLBASICPARA" and Read & "CPS" are set to YES. Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
GBFD111202
O&M of BTS
0~9999
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
GBFD111202
O&M of BTS
0~99
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
PATHCHK
BSC6900
None
None
Enumeration Type
None DISABLED
DISABLED
IP path None
Not involved
Not involved
Not involved
This paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
PATHID
IP path ID
BSC6900
IP path ID
None
None
0~65535
None None
None
IP path None
Not involved
Not involved
Not involved
None
Transpor t
PATHID
IP path ID
BSC6900
PATHLOSS
BSC6900
ADD IPMUX(Mandato ry) ADD IP path IPPATHBIND(Ma ID,Identifying ndatory) an IP path. None Transmission loss difference between radio SET frequencies GCELLPWRBAS on different GBFDIC(Optional) bands 117602
None
0~65535
None None
None
IP path None
Not involved
Not involved
Not involved
None
Transpor t
0~255, step:0.01
dB
None
79 Cell
Not involved
Not involved
None
Radio
6/9/2013
Page205of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether to perform path loss-based sorting in a better cell handover GBFDalgorithm 510501
HUAWEI II Handover
Enumeration Type
PATHT
IP path type
BSC6900
ADD IPPATH(Optional ) IP path type LOD PATCH(Mandato ry) CON PATCH(Mandato ry) Patch type
None
None
Enumeration Type
NO(No), YES(Yes) QoS(QoS), BE(BE), AF11(AF11), AF12(AF12), AF13(AF13), AF21(AF21), AF22(AF22), AF23(AF23), AF31(AF31), AF32(AF32), AF33(AF33), AF41(AF41), AF42(AF42), AF43(AF43), EF(EF), LQ_QOS(LQ_Q OS), LQ_BE(LQ_BE), LQ_AF11(LQ_A F11), LQ_AF12(LQ_A F12), LQ_AF13(LQ_A F13), LQ_AF21(LQ_A F21), LQ_AF22(LQ_A F22), LQ_AF23(LQ_A F23), LQ_AF31(LQ_A F31), LQ_AF32(LQ_A F32), MAINCPU_PATC H(Main programme patch), DSP_PATCH(DS P programme patch) DB0(0dB), DB2(2dB), DB4(4dB), DB6(6dB), DB8(8dB), DB10(10dB), DB12(12dB), DB14(14dB), DB16(16dB), DB18(18dB), DB20(20dB), DB22(22dB), DB24(24dB), DB26(26dB), DB28(28dB), DB30(30dB)
NO, YES
None None
NO
Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM2. Write
Not involved
Not involved
None
Radio
QoS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, QOS, LQ_BE, LQ_AF11, LQ_AF12, LQ_AF13, LQ_AF21, LQ_AF22, LQ_AF23, LQ_AF31, LQ_AF32, LQ_AF33, LQ_AF41, LQ_AF42, LQ_AF43, LQ_EF
None None
QoS
IP path None
Not involved
Not involved
Not involved
None
Transpor t
PATTYPE
Patch type
BSC6900
MRFD210301
Configuration Management
Enumeration Type
MAINCPU_PATCH, DSP_PATCH
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
PB
Pb
BSC6900
PBGTHOEN
PBGTLAST
BSC6900
BTS power attenuation SET on the GCELLPSPWPA measured RA(Optional) PBCCH. Whether to use the PBGT handover algorithm. PBGT handovers are based on path loss. The PBGT handover algorithm searches in real time for cells that have lower path loss and meet certain system requirements , and decides whether to perform the handovers. To avoid pingpong handovers, PBGT handovers can occur only on TCHs SET and among GCELLHOBASI cells on a C(Optional) same layer The triggering of PBGT handovers must meet the P/N criteria, that is, when the condition for PBGT handovers is met for a consecutive P seconds during N seconds, a PBGT handover is triggered. This parameter corresponds SET to the P in GCELLHOBASI the P/N C(Optional) criteria. PBGT handovers to a neighboring cell are allowed only when the downlink level difference between the neighboring cell and the serving cell is larger than this parameter. When the value of this parameter is smaller than 64, handovers to a neighboring cell with a lower level than the ADD current G2GNCELL(Opti serving cell onal) are allowed. The triggering of PBGT handovers must meet the P/N criteria, that is, when the condition for PBGT handovers is met for a consecutive P seconds during N seconds, a PBGT handover is triggered. This parameter corresponds SET to the N in GCELLHOBASI the P/N C(Optional) criteria. Maximum times for an external PCU to retransmit a PB interface maintenance message. When the PCU fails to receive a response to a PB interface maintenance message before the timer timeouts, it retransmits the PB interface SET maintenance OTHSOFTPARA message to (Optional) the BSC. Minimum
GBFD119115
Power Control
Enumeration Type
DB0, DB2, DB4, DB6, DB8, DB10, DB12, DB14, DB16, DB18, DB20, DB22, DB24, DB26, DB28, DB30
dB
None
DB2
Cell
None
Not involved
Not involved
None
Radio
GBFD110601
HUAWEI I Handover
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM1. Write
Not involved
Not involved
None
Radio
GBFD110601
HUAWEI I Handover
1~16
None
2 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "PBGTHOEN" is set to YES. The following condition must be met: "PBGTSTAT" >= "PBGTLAST".
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
BSC6900
GBFD110601
HUAWEI I Handover
0~127
dB
None
In densely populated urban areas, the recommended value is 68; in the suburbs, the recommended value is 72.
Cell
None
Not involved
Not involved
None
Radio
PBGTSTAT
GBFD110601
HUAWEI I Handover
1~16
None
3 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "PBGTHOEN" is set to YES. The following condition must be met: "PBGTSTAT" >= "PBGTLAST".
Not involved
Not involved
None
If this parameter is set to a greater value, unnecessary handovers may be performed; if this parameter is set to a The parameter modification smaller value, handovers may not be has no impact on the performed in time and call drops may Versions earlier than equipment. occur. BSC6900 V900R011
Radio
PbMtnMsgR eSend
BSC6900
GBFD114101
GPRS
0~65535
None None
This parameter is valid only when "TYPE" in BSC69 "SET BSCPCUTYPE" is 2 00 set to OUTER.
Not involved
Not involved
None
Equipme nt
PCADJPERI OD
PC Interval
BSC6900
interval between two consecutive SET power GCELLPWRBAS control GBFDIC(Optional) commands 110703
ms
None
3 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
6/9/2013
Page206of316
150682621.xls.ms_office
Security Level:
PCMEASCH AN PC_MEAS_CHAN
BSC6900
PCU
PCU No
BSC6900
Channel used for the measured receiving power. It is used to set the measured receiving power level of the SET channel and GCELLPSPWPA control the RA(Optional) power of the It is one key filed of identifying Pb interface CIC status and indicates the PCU No. correspondin BLK g to the Pb PBCIC(Mandator interface y) CIC.
GBFD119115
Power Control
Enumeration Type
bcch(bcch), pdch(pdch)
bcch, pdch
None None
pdch
Cell
None
Not involved
Not involved
None
Radio
GBFD111203
O&M of BSC
0~31
None None
None
PBCIC None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Equipme nt
PCUINDEX
PCU No.
BSC6900
PCU number, identifying a ADD unique PCU GBFDPCU(Mandatory) number. 114101 Port No. of ADD the E1/T1 of PBE1T1(Mandat the Pb ory) interface. Number of the PCU to SET which the GCELLGPRS(M current cell andatory) belongs.
GPRS
0~31
None None
None
BSC
None
Not involved
Not involved
Not involved
None
Equipme nt
PCUNO
PCU No.
BSC6900
GBFD111203
O&M of BSC
0~31
None None
None
PBE1T 1 None
Not involved
Not involved
Not involved
None
Radio
PCUNO
PCU No.
BSC6900
GBFD114101
GPRS
0~255
None None
None
Cell
This parameter is valid only when "GPRS" is set Read & to SupportAsExtPcu. Write
Not involved
Not involved
None
Equipme nt
PCUPREEM PTFLAG
Whether the PCU supports the PREEMPT_A BIS_LINK message. If the BTS supports the FLEXABIS function, the CS service can preempt the timeslots on the Abis interface used by the PS service. After the preemption occurs, the BSC sends a PREEMPT_A BIS_LINK message to the PCU if SET the PCU can BTSFLEXABISP process the GBFDARA(Optional) message. 111203 PDCH downlink multiplex threshold, Indicating the maximum TBFs on the downlink PDCH (parameter GBFDvalue/10). 113101 Whether to enable power consumption reduction of the PDCH Whether to preempt the channels carrying the CS service when the channels for the PS service are insufficient "Level of Preempting Dynamic Channel" is set to "Preempt all dynamic TCHFs". This parameter must be used together with "Level of Preempting Dynamic Channel" in the following conditions: 1. When "Level of Preempting Dynamic Channel" is set to Preempt all
O&M of BSC
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Radio
PDCH Dynamic Adjustment Interval Type 10~80 Power Optimization Based on Channel Type
10~80
None None
80 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD111606
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
PDCHREFO RMING
PDCH Reforming
BSC6900
GBFD113101
NO(NO), YES(YES)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
PENDING timer
BSC6900
PeerBSCID
Peer BSC ID
BSC6900
BSC6900
BSC6900
PEERBSCM ASK
BSC6900
PDCH uplink multiplex threshold, indicating the maximum TBFs on the SET uplink PDCH GCELLPSCHM( (parameter GBFDOptional) value/10). 113101 Pending ADD timer of the M3LKS(Optional M3UA link ) set. None SET GBSCREDGRP( Peer BSC GBFDMandatory) identity. 113725 SET BTSIP(Mandator ID of the GBFDy) peer BSC 118601 IP address of SET the peer BSC BTSIP(Mandator on the home GBFDy) BSC side 118601 IP subnet SET mask of the BTSIP(Mandator peer BSC GBFDy) port 118601 Identifier of SET the peer BTS BTSIP(Mandator on the home GBFDy) BSC side 118601 GBFD118611 GBFD118622
10~70
None None
70 Cell
None
Read & Write Read & Write Read & Write Read & Write
Not involved
Not involved
None
1~10
Not involved
Not involved
None
0~65534
None None
None
Not involved
Not involved
None
Abis over IP
0~65534
None None
None
BTS
None
BTS
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
None
None
None
Abis over IP
IP Address Type
None
None
BTS
None
BTS
None
The BTS should be reset to validate the parameter modification. None The BTS should be reset to validate the parameter modification. None The BTS should be reset to validate the parameter modification. None
Radio
Abis over IP
IP Address Type
None
None
BTS
None
BTS
None
Radio
BSC6900
0~2047
None None
None
BTS
None
BTS
None
Radio
PEERIP
Peer IP address
BSC6900
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
Not involved
PEERIP
Peer IP address
BSC6900
IP Address Type
None
None
MP group
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The local IP address and peer IP must be configure d in the same network segment. The peer IP address cannot be the same with the local IP address The parameter modification of the has no impact on the BSC. equipment. None The paramete r cannot be modified. Not involved
Transpor t
Transpor t
PEERIP
Peer IP address
BSC6900
STR Detects the IPCHK(Mandator IP address of GBFDy) the gateway 118609 ADD BTSPPPLNK(Ma ndatory) ADD BTSMPGRP(Ma IP address of GBFDndatory) the peer 118611
IP Address Type
None
None
None
None
Not involved
Not involved
Not involved
None
Transpor t
PEERIP
Peer IP address
BSC6900
IP Address Type
None
None
BTS
The peer IP address and the local IP address specified by "Local IP address" must be on the Read & same network segment. Write
PPP link
None
None
Transpor t
PEERIP1
First destination IP ADD address. The SCTPLNK(Mand invalid value atory) is 0. None
None
IP Address Type
None
None
SCTP link
None
SCTP link
The services are interrupted until the SCTP link is working normally.
The both end address of the SCTP is the paramete r for the interconn ection. The value can be modified after the negotiati on with The parameter modification the peer has no impact on the system. equipment. None
Transpor t
6/9/2013
Page207of316
150682621.xls.ms_office
Security Level:
PEERIP2
Second destination IP ADD address. The SCTPLNK(Optio invalid value nal) is 0. None
None
IP Address Type
None
None
SCTP link
None
SCTP link
The services are interrupted until the SCTP link is working normally.
The both end address of the SCTP is the paramete r for the interconn ection. The value can be modified after the negotiati on with The parameter modification the peer has no impact on the system. equipment. None
Transpor t
BSC6900
The peer IP address should not be the same as the local address. None
None
IP Address Type
None
None
"IPADDR" and "PEERIPADDR" in "ADD IPPATH" must be at one network segment;("IPADDR","PE ERIPADDR","PEERMAS K" in "ADD IPPATH") conflicts with other IPPATH whose type is Read & IP path IUPS. Write ("IPADDR","PEERIPADD R","PEERMASK" in "ADD IPPATH") conflicts with other IPPATH Read & IP path whose type is IUPS. Write
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
PEERMASK
BSC6900
None
IP Address Type
None
Not involved
Not involved
Not involved
None
Transpor t
PEERPN
BSC6900
BSC6900
BSC6900
Destination SCTP port No.. Peer Software Version Whether to punish the target cell when a handover fails or to punish the current serving cell when a handover is of more TA or bad quality. After a handover fails due to congestion of the target cell, the system needs to punish the target cell to prevent the MS from attempting to switch to the target cell again. Ping-pong SET handovers GCELLHOCTRL can easily (Optional) occur when
None GBFD111202
None
1024~65535
None None
None
SCTP link
None
SCTP link
The services are interrupted until the SCTP link is working normally.
O&M of BTS
String Type
None
1~63 characters
None None
None
None
None
Not involved
Not involved
The SCTP port number is the paramete r for the negotiati on. The value can be modified after the negotiati on with The parameter modification the peer has no impact on the system. equipment. None The parameter modification has no impact on the None equipment. None
Transpor t Equipme nt
BSC6900 V900R011
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Penalty duration for cell reselection. Cell penalty can be performed only in this duration. When this parameter is set to a greater value, the MS cannot reselect a cell in longer time in the case of reselection failure or reselection due to load. The penalty timer is shorter when this parameter is SET set to a GCELLNC2PAR smaller GBFDA(Optional) value. 116201 Penalty level of the target cell when the cell reselection failure message is received or the cell starts the load reselection. This parameter is valid only in SET the cell GCELLNC2PAR penalty GBFDA(Optional) duration. 116201 Timer of penalty on a neighboring cell when a handover SET fails due to GCELLHOFITPE faults of data N(Optional) configration.
0~255
None
10 Cell
None
Not involved
Not involved
None
Radio
BSC6900
0~63
None None
30 Cell
None
Not involved
Not involved
None
Radio
PENALTYTI MER
CfgPenaltyTimer
BSC6900
GBFD110601 GBFD510501
0~255
None None
None
Cell
None
Not involved
Not involved
PERIOD
None
1~60
When the value of "PATHCHK" in "ADD IPPATH" is set to ENABLED, this 5 IP path parameter is valid.
Not involved
Not involved
None When the network status is poor, the check period should not be too small. Otherwis e, the path The parameter modification state is has no impact on the affected. equipment. None
If this parameter is set to a greater value, the target cell for the previous handover will not be selected for the next handover, but the probability of call drop increases. The parameter modification If this parameter is set to a smaller value, has no impact on the the probability of handover failure Versions earlier than equipment. increases. BSC6900 V900R011
Radio
Equipme nt
PERIOD
Measurement Period
BSC6900
Measuremen t period for each STR frequency GBFDNCS(Mandatory) group 510901 Compression flag of the GBFDPPP link 118611 protocol GBFDdomain 118622
1~48, step:15
min
None
None
BSC69 00 None
Not involved
Not involved
None
Radio
PFC
BSC6900
Enumeration Type
None Enable
Enable
PPP link
None
PPP link
Negotiati on fails if this paramete The parameter modification r is has no impact on the modified. equipment. None Negotiati on fails if this paramete The parameter modification r is has no impact on the modified. equipment. None
Transpor t
PFC
BSC6900
Compression flag of the GBFDADD PPP link 118611 MPLNK(Optional protocol GBFD) domain 118622 ADD BTSPPPLNK(Op tional) ADD BTSMPLNK(Opti onal) Whether to compress the protocol field of the PPP GBFDlink 118611
Enumeration Type
None Enable
Enable
MP link None
BSC6900
Transpor t
PFC
BSC6900
Enumeration Type
Disable, Enable
Disable, Enable
None Enable
Enable
BTS
None
PPP link
None
None
Transpor t
PFCSUP
PFC Support
BSC6900
ADD NSE(Optional)
Whether to support packet flow context (PFC). The PFC flow is used to control the QoS of the packet service of the GBFDMS. 119901 Whether to support the paging message classification GBFDfunction 111705
Streaming QoS(GBR)
Enumeration Type
None NO
NO
NSE
None
NSE
The SIGBVC must be reset after this switch is turned on. The BSC supports the PFC when the SGSN The transport path should supports be re-established after the the PFC. parameter modification.
None
Equipme nt
0~2
None None
BSC69 2 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page208of316
150682621.xls.ms_office
Security Level:
BSC6900
Maximum number of paging messages that the BSC can process over the A interface within a measurement GBFDperiod 111705
10~1000
None None
Not involved
Not involved
BSC6900
Measuremen t period for calculating the arrival rate of paging GBFDmessages 111705
Interval Type 100~600000 BE(BE), AF11(AF11), AF12(AF12), AF13(AF13), AF21(AF21), AF22(AF22), AF23(AF23), AF31(AF31), AF32(AF32), AF33(AF33), AF41(AF41), AF42(AF42), AF43(AF43), EF(EF) BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
100~600000
ms
None
Not involved
Not involved
If this paramete r is set to a greater value, more paging message s are processe d. When the BSC is overload ed, the control on the arrival rate of paging message s does not take effect. If this paramete r is set to a smaller value, some paging message s that can be If this paramete r is set to a smaller value, the control of the arrival rate of paging message s is sensitive. If this paramete r is set to a greater value, the control is insensitiv e.
Equipme nt
Equipme nt
PHB
Per-Hop Behavior
BSC6900
None
None
Enumeration Type
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
None None
None
Board
1.The phb of the traffic's transmission path is determined like this: if the phb of this transmission path is QOS, use the traffic's phb from TRMMAP; if the phb of this transmission path is BE,AF11,AF12,AF13,AF 21,AF22,AF23,AF31,AF 32,AF33,AF41,AF42,AF 43,EF, use the phb of Read & transmission path. Write
Not involved
Not involved
Not involved
None
Transpor t
PHB
PHB
BSC6900
GBFDADD PHB type of 118604 IPMUX(Mandato the IPMUX to GBFDry) be enabled 118610
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, , AF43, EF None None
None
IP Path None
Not involved
Not involved
The adjacent node ID must be The parameter modification configure has no impact on the d. equipment. None
Transpor t
PI
BSC6900
Cell Reselect Parameters Indication (PI), sent on the broadcast channel, indicates whether "Cell reselect offset", "Cell reselect temporary offset" in the "SET GCELLIDLE AD" command, and "Cell SET reselect GCELLIDLEBAS penalty time" GBFDIC(Optional) are used. 110402 Whether to enable the private key password DISABLE: indicating that the private key password is disabled ENABLE: indicating that the SET private key CERTFILE(Optio password is MRFDnal) enabled Indicates the 210305 number of the packets for remote loopback test of the OAM in the GBFDEthernet Indicates the 118630
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
The MS calculates C1 and C2 of the serving cell at a minimum interval of 5s. When necessary, the MS re-calculates C1 and C2 of all non-serving cells (neighboring cells). The MS constantly checks whether a cell reselection is required by checking following conditions: Whether the path loss (C1) of the current serving cell drops below 0 within 5s. If yes, the path loss is too large. C2 of an appropriate non-serving cell exceeds that of the serving cell in 5s and the following conditions are met: The C2 of a new cell in another LAC minus CRH (broadcast in the system information 3 and 4 of the serving cell) exceeds C2 of the serving cell in 5s. A cell reselection is performed in the last 15s, and the C2 of the new cell minus 5 dB constantly exceeds the C2 of the serving cell in 5s. A better cell exists if the above conditions The parameter modification are met. If a better cell exists, the MS has no impact on the reselects a cell, and does not select the Versions earlier than equipment. previous cell within 5s. BSC6900 V900R011
Radio
Security Management
Enumeration Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
PKTCOUNT
PKT Count
BSC6900
Ethernet OAM
5~64
None
10
BSC69 10 00 None
Ethernet port
The loopback keeps interrupting the services until the loopback is cancelled.
None
Transpor t
PKTLEN
PKT Size[Byte]
BSC6900
PKTLEN
Packet Length
BSC6900
BSC6900
length of the packets for the remote loopback test STR of the OAM ETHOAMLOOP in the TST(Optional) Ethernet STR Loopback FRPORTLOOP( packet Mandatory) length. Multiplexing packet length threshold. The length of the multiplexed packet must not exceed the multiplexing packet length threshold. If the length of the multiplexed packet exceeds the multiplexing packet length threshold, the packet is transferred without being added with new subframes. The multiplexing packet length threshold refers to the ADD payload, BTSABISMUXFL excluding the OW(Optional) IP/UDP
GBFD118630 GBFD111203
Ethernet OAM
64~1024
byte
128
Ethernet port
The loopback keeps interrupting the services until the loopback is cancelled.
None
O&M of BSC
2~1500
byte
None
None
BC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt
Radio
GBFD118604
Abis MUX
24~1031
byte
1000
1000 BTS
This parameter must meet the following requirements: The sum of the value of "MUX Sub Frame Threshold" and 8 must be smaller than the Read & value of this parameter. Write
Not involved
Not involved
None
Radio
PKTSI
PACKET SI
BSC6900
Whether the cell supports the PACKET SI STATUS flow. In the PACKET SI STATUS flow, the MS sends the Packet PSI/SI Status message to indicate that the MS has stored the system message. The network side sends the Packet Serving Cell Data message to notify the MS SET of the system GCELLGPRS(O message not GBFDptional) stored. 119801 Indicates the size of the PING packet, neither IP header nor ICMP header is included. None
Packet SI Status
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
This parameter is valid only when "GPRS" is set to SupportAsInnPcu or Read & SupportAsExtPcu. Write
Cell
None
Radio
PKTSIZE
Size of packet
BSC6900
PING IP(Optional)
None
20~1500
byte
56
Not involved
Not involved
Not involved
None
Transpor t
PKTSIZE
PKT Size
BSC6900
GBFD118630
Ethernet OAM
95~512
byte
128
Not involved
Not involved
None
Transpor t
6/9/2013
Page209of316
150682621.xls.ms_office
Security Level:
PL1
Persistence Level 1
BSC6900
PL16QAM
Persistence level 1 of the radio access priority. During MS access, the access priority of the MS is set. If the priority of the MS is higher than the access priority of the MS, the cell allows the access of the MS. Otherwise, the cell rejects the access of the MS. The value "no use" SET indicates this GCELLPRACH( parameter is GBFDOptional) not used. 119110 16QAM power attenuation level of all carriers except timeslot 7 on the BCCH TRX. This parameter is required because the EDGE TRXs must use the power lower than the average GMSK power to transmit the 16QAM signals within SET the spectrum GTRXDEV(Optio specifications GBFDnal) . 114201 Persistence level 2 of the radio access priority. During MS access, the access priority of the MS is set. If the priority of the MS is higher than the access priority of the MS, the cell allows the access of the MS. Otherwise, the cell rejects the access of the MS. The value "no use" indicates this parameter is GBFDnot used. 119110
Access
Enumeration Type
0_level(0_level), 1_level(1_level), 2_level(2_level), 3_level(3_level), 4_level(4_level), 5_level(5_level), 6_level(6_level), 7_level(7_level), 8_level(8_level), 9_level(9_level), 10_level(10_level ), 11_level(11_level ), 12_level(12_level ), 13_level(13_level ), 14_level(14_level ), 16_level(16_level ), nouse(no use)
0_level, 1_level, 2_level, 3_level, 4_level, 5_level, 6_level, 7_level, 8_level, 9_level, 10_level, 11_level, 12_level, 13_level, 14_level, 16_level, no use
None None
12_level
Cell
None
Not involved
Not involved
None
Radio
EGPRS
0~50, step:0.2
dB
None
0 TRX
None
Not involved
Not involved
This paramete r is valid for the EDGE The parameter modification TRX has no impact on the only. equipment. None
BSC6900 V900R011
Radio
PL2
Persistence Level 2
BSC6900
Access
Enumeration Type
0_level(0_level), 1_level(1_level), 2_level(2_level), 3_level(3_level), 4_level(4_level), 5_level(5_level), 6_level(6_level), 7_level(7_level), 8_level(8_level), 9_level(9_level), 10_level(10_level ), 11_level(11_level ), 12_level(12_level ), 13_level(13_level ), 14_level(14_level ), 16_level(16_level ), nouse(no use)
0_level, 1_level, 2_level, 3_level, 4_level, 5_level, 6_level, 7_level, 8_level, 9_level, 10_level, 11_level, 12_level, 13_level, 14_level, 16_level, no use
None None
13_level
Cell
None
Not involved
Not involved
None
Radio
PL3
Persistence Level 3
BSC6900
PL32QAM
Persistence level 3 of the radio access priority. During MS access, the access priority of the MS is set. If the priority of the MS is higher than the access priority of the MS, the cell allows the access of the MS. Otherwise, the cell rejects the access of the MS. The value "no use" SET indicates this GCELLPRACH( parameter is GBFDOptional) not used. 119110 32QAM power attenuation level of all carriers except timeslot 7 on the BCCH TRX. This parameter is required because the EDGE TRXs must use the power lower than the average GMSK power to transmit the 32QAM signals within SET the spectrum GTRXDEV(Optio specifications GBFDnal) . 114201 Persistence level 4 of the radio access priority. During MS access, the access priority of the MS is set. If the priority of the MS is higher than the access priority of the MS, the cell allows the access of the MS. Otherwise, the cell rejects the access of the MS. The value "no use" indicates this parameter is GBFDnot used. 119110
Access
Enumeration Type
0_level(0_level), 1_level(1_level), 2_level(2_level), 3_level(3_level), 4_level(4_level), 5_level(5_level), 6_level(6_level), 7_level(7_level), 8_level(8_level), 9_level(9_level), 10_level(10_level ), 11_level(11_level ), 12_level(12_level ), 13_level(13_level ), 14_level(14_level ), 16_level(16_level ), nouse(no use)
0_level, 1_level, 2_level, 3_level, 4_level, 5_level, 6_level, 7_level, 8_level, 9_level, 10_level, 11_level, 12_level, 13_level, 14_level, 16_level, no use
None None
14_level
Cell
None
Not involved
Not involved
None
Radio
EGPRS
0~50, step:0.2
dB
None
0 TRX
None
Not involved
Not involved
This paramete r is valid for the EDGE The parameter modification TRX has no impact on the only. equipment. None
BSC6900 V900R011
Radio
PL4
Persistence Level 4
BSC6900
Access
Enumeration Type
0_level(0_level), 1_level(1_level), 2_level(2_level), 3_level(3_level), 4_level(4_level), 5_level(5_level), 6_level(6_level), 7_level(7_level), 8_level(8_level), 9_level(9_level), 10_level(10_level ), 11_level(11_level ), 12_level(12_level ), 13_level(13_level ), 14_level(14_level ), 16_level(16_level ), nouse(no use)
0_level, 1_level, 2_level, 3_level, 4_level, 5_level, 6_level, 7_level, 8_level, 9_level, 10_level, 11_level, 12_level, 13_level, 14_level, 16_level, no use
None None
16_level
Cell
None
Not involved
Not involved
None
Radio
PL8PSK
BSC6900
Level at which the power in the EDGE TRX is decreased. The power can be decreased at 50 levels. At each level, the power is decreased by 0.2 dB. To meet spectrum requirements , an EDGE transceiver transmits 8PSK signals at a power lower than the average SET power for GTRXDEV(Optio GMSK GBFDnal) modulation. 114201
EGPRS
0~50
None None
None
TRX
None
Not involved
Not involved
This paramete r is valid only for EDGE TRXs and is invalid for The parameter modification ordinary has no impact on the TRXs. equipment. None
Radio
6/9/2013
Page210of316
150682621.xls.ms_office
Security Level:
PLPRD
BSC6900
PLTH
BSC6900
PLYPOINT
Play Point
BSC6900
Statistics period of the packet drop ratio. This parameter indicates the period for collecting the statistics information about the packet drop ratio. Note that the unit of this parameter is 100 milliseconds. The actual delay statistics period is the value of this parameter ADD multiplied by IPLOGICPORT( 100 Optional) milliseconds. Packet drop ratio threshold for speed reduction. When the packet drop ratio exceeds the value of this parameter, the rate of the logical port is reduced. Note that the unit of this ADD parameter is IPLOGICPORT( a thousand to Optional) one. SET Point at TCPLYVOICE(M which to play andatory) sound
None
None
100~10000, step:100
ms
10
IP logical 10 port
None
Not involved
Not involved
None
Transpor t
None GBFD111203
None
O&M of BSC
0~1, step:0.001
None
30
IP logical 30 port
None
Not involved
Not involved
None
A, ABIS
None None
None
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Equipme nt
BSC6900
PLYTIME
Play Time
BSC6900
SET Whether to TCPLYVOICE(M enable sound GBFDandatory) playing 111203 Duration of sound playing. If this parameter is set to 0, the sound is played repeatedly. If this parameter exceeds the duration of the record file, the void sound is SET played for TCPLYVOICE(O the GBFDptional) exceeding 111203 CPU usage threshold for performance monitoring. When the average CPU usage of sliding windows reaches or exceeds the threshold, performance monitoring is triggered. This parameter is valid only when "Board SET Class" is FCCPUTHD(Opti "XPU" or WRFDonal) "SCU". 040100 Packet queue usage threshold for performance monitoring. When the average packet queue usage of sliding windows reaches or exceeds the threshold, performance monitoring is triggered. This parameter is valid only when "Board SET Class" is FCMSGQTHD(O "XPU" or ptional) "SCU". Interval for sending cell paging group packets when Paging Messages Optimize at SET Abis GCELLSOFT(M Interface is andatory) enabled Number of cell paging group packets when Paging Messages Optimize at SET Abis GCELLSOFT(M Interface is andatory) enabled Whether to enable Paging Messages SET Optimize at GCELLSOFT(O Abis ptional) Interface CPU usage threshold for recovery from performance monitoring. When the average CPU usage of sliding windows is lower than the threshold, performance monitoring is stopped. This parameter is valid only when "Board SET Class" is FCCPUTHD(Opti "XPU" or onal) "SCU". Packet queue usage threshold for recovery from performance monitoring. When the packet queue usage of sliding windows is lower than the threshold, performance monitoring is stopped. This parameter is valid only when "Board SET Class" is FCMSGQTHD(O "XPU" or ptional) "SCU". Whether to monitor the SET RRM FCSW(Optional) performance SET SCUPORT(Optio Number of nal) the port SET Port No. of ALMPORT(Man environment datory) alarm
O&M of BSC
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
None
Board
None
Not involved
Not involved
If "Play switch" is set, the normal calls may The parameter modification be has no impact on the affected. equipment. None
Equipme nt
O&M of BSC
0~600
None
None
Board
None
Not involved
Not involved
None
Equipme nt
PMCTHD
BSC6900
Flow Control
30~100
per cent
None
60 Board
None
Not involved
Not involved
None
Equipme nt
PMCTHD
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
67 Board
None
Not involved
Not involved
None
Equipme nt
PMI
BSC6900
GBFD110303
Paging
1~8, step: 50
ms
None
None
Cell
None
Not involved
Not involved
None
Equipme nt
PMNUM
BSC6900
GBFD110303
Paging
2~15
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
PMOAFLAG
BSC6900
GBFD110303
Paging
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
PMRTHD
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
50 Board
None
Not involved
Not involved
None
Equipme nt
PMRTHD
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
62 Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
PMSW
BSC6900
Enumeration Type
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
PN
Port No.
BSC6900
0~11
None None
None
None
None
Not involved
Not involved
None
PN
Port No.
BSC6900
1~32
None None
None
None
None
Not involved
Not involved
None
6/9/2013
Page211of316
150682621.xls.ms_office
Security Level:
PN
Port No.
BSC6900
PN
Port No
BSC6900
Port No. of the XPUa/XPUb/ SPUa/SPUb board. If you do not specify this parameter, all ports of SET the XPUa XPUPORT(Optio board are nal) queried. E1T1 port number of the Ater interface E1 mode: 0~31 (EIU), 0~62(OIU), 0~251(POUc ). T1 mode: 0~31(EIU), ADD 0~83(OIU), ATERE1T1(Man 0~335(POUc datory) ). Port No. of ADD the E1/T1 of PBE1T1(Mandat the Pb ory) interface. ADD AE1T1(Mandator y) BLK AE1T1(Mandator y) Port number
MRFD210301
Configuration Management
0~3
None None
None
None
None
Not involved
Not involved
None
Equipme nt
GBFD111801
0~335
None None
None
E1/T1 link
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
PN
Port No.
BSC6900
GBFD111203
O&M of BSC
0~335
None None
None
PBE1T 1 None
Not involved
Not involved
Not involved
None
Transpor t
PN
Port No
BSC6900
GBFD111803
0~335
None None
None
E1/T1 link
None
Not involved
Not involved
Not involved
PN
BM Port No
BSC6900
It is one key field of identifying the block of the Ater timeslot and indicates the port No. of BLK the Ater ATERE1T1(Man interface datory) timeslot.
None
None
0~335
None None
None
E1/T1 link
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None 1. The block of Ater interface must be configure d. 2. If the BSC is configure d to the integrate d BMTC or A over IP is configure d, the configura tion does not support the operation . 3. If the block operation is applicabl e to only the ATERTS The parameter modification of the has no impact on the BM equipment. None
Transpor t
Transpor t
PN
Port No.
BSC6900
PN
Port No.
BSC6900
Number of the port where the alarm is MRFDgenerated 210304 Indicates the port number for running this command. OIUa: 0; AOUa/POUa: 0~1; SET UOIa(ATM)/ MSPCMD(Mand UOIa(IP)/AO atory) Uc/POUc: SET 0~3; MSP(Mandatory) UOIc:0~7 None ADD OBJALMSHLD( Mandatory)
Faulty Management
0~335
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
None
0~7
None None
None
Not involved
Not involved
Not involved
None
Transpor t
PN
Port No.
BSC6900
None
None
0~31(AEUa/PEUa/EI Ua), 0~62(E1 of OIUa), 0~83(T1 of OIUa), 0~125(E1 of AOUa/POUa), 0~167(T1 of AOUa/POUa), 0~251(E1 of AOUc/POUc), 0~335(T1 of AOUc/POUc) None None 0~31(AEUa/PEUa/EI Ua), 0~62(E1 of OIUa), 0~83(T1 of OIUa), 0~125(E1 of AOUa/POUa), 0~167(T1 of AOUa/POUa), 0~251(E1 of AOUc/POUc), 0~335(T1 of AOUc/POUc) None None 0~31(AEUa/PEUa/EI Ua), 0~62(E1 of OIUa), 0~83(T1 of OIUa), 0~125(E1 of AOUa/POUa), 0~167(T1 of AOUa/POUa), 0~251(E1 of AOUc/POUc), 0~335(T1 of AOUc/POUc) None None
None
E1/T1 port
None
Not involved
Not involved
None
Transpor t
PN
Port No.
BSC6900
LOP E1T1(Optional)
None
None
None
None
None
Not involved
Not involved
None
Transpor t
PN
Port No.
BSC6900
None
None
None
E1/T1 port
None
Not involved
Not involved
Not involved
PN
Port No.
BSC6900
PN
Port No.
BSC6900
Indicates the port number for running this command. OIUa: 0; AOUa/POUa: 0~1; UOIa(ATM)/ UOIa(IP)/AO SET Uc/POUc: OPTLOP(Manda 0~3; UOIc: tory) 0~7 None SWP ETHPORT(Mand GBFDatory) Port number 111701
0~7
None None
None
Not involved
Not involved
The paramete r cannot be modified. When the loopback type is changed to REMOT E_LOOP or LOCAL_ LOOP, the service is affected. The service becomes normal when the loopback test is canceled. When the loopback type is set to LOCAL_ LOOP, you cannot directly change it to REMOT E_LOOP
Not involved
None
Transpor t
0~11
None None
None
BSC6900
PN
Port No.
BSC6900
SET E1T1(Optional)
None
None
0~31(AEUa/PEUa/EI Ua), 0~62(E1 of OIUa), 0~83(T1 of OIUa), 0~125(E1 of AOUa/POUa), 0~167(T1 of AOUa/POUa), 0~251(E1 of AOUc/POUc), 0~335(T1 of AOUc/POUc) None None 0(OIUa), 0~1(AOUa/POUa), 0~3(UOIa/AOUc/PO Uc), 0~7(UOIc) None None
None
E1/T1 port
None
Not involved
Not involved
None If certain link is occupied, conversio n from E1 to T1 or from T1 to E1 cannot be The parameter modification performe has no impact on the d. equipment. None The paramete r cannot be modified. Not involved
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
Transpor t
PN
Port No.
BSC6900
SET OPT(Optional)
Port number
None
None
None
Board
None
Not involved
Not involved
Not involved
None
Transpor t
PN
Port No.
BSC6900
None
None
0~7
None None
None
Not involved
Not involved
1. This comman d is applicabl e to the boards AOUa and POUa. 2. It is used for interwork ing with products of other The parameter modification manufact has no impact on the urers. equipment. None
Transpor t
PN
Port No.
BSC6900
SET ETHPORT(Optio nal) ADD ETHREDPORT( Mandatory) ADD ETHIP(Mandator y) ADD ETHMEP(Manda tory) Ethernet port None
None
None None
None
If port 0 or port 4 of the FG2a board is set to the GE port, the port number can only be 0 or 4. Otherwise, the port number ranges from 0 to 7. If only port 0 is set to the GE port, ports 1-3 are unavailable. If port 4 is set to the GE port, Ethern ports 5-7 are Read & et port unavailable. Write
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
PN
BSC6900
None
None
0~11
None None
None
IP logical port
None
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page212of316
150682621.xls.ms_office
Security Level:
PN
Port No.
BSC6900
None None
None
None
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
PN
Port No.
BSC6900
CHK E1T1CRS(Mand E1/T1 port atory) number STR FRPORTLOOP( Optional) ADD BC(Mandatory) ADD PBSL(Mandatory )
None
None
0~31
None None
None
E1/T1 port
None
Not involved
Not involved
Not involved
None
Transpor t
PN
Port No.
BSC6900
PN
Port No.
BSC6900
Gb Over FR
0~335
None None
None
E1/T1 port
None
Not involved
Not involved
Not involved
O&M of BSC
0~335
None None
None
PBSL
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Transpor t
PN
Port No.
BSC6900
Port No. of the BSC ADD board BTSAUTOPLAN( connected GBFDMandatory) with the BTS 111202 SET BTSENVALMPO RT(Mandatory) ADD BTSOBJALMSH Alarm port LD(Mandatory) number SET BTSFORBIDTS( Mandatory) ADD BTSPPPLNK(Ma ndatory) ADD BTSMPLNK(Man datory) SET BTSOMLTS(Ma ndatory)
O&M of BTS
0~355
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
PN
Port No.
BSC6900
MRFD210304
Faulty Management
0~255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
PN
Port NO.
BSC6900
PN
Port NO.
BSC6900
Number of the port on GBFDthe BTS side 111202 Number of the port on GBFDthe BTS side 111202
O&M of BTS
0~23
None None
None
PPP link
None
BTS
None
O&M of BTS
0~23
None None
None
BTS
None
BTS
None
The transport path should be re-established after the parameter modification. The transport path should be re-established after the parameter modification.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
None
Radio
PN
Port No.
BSC6900
PN
Port No.
BSC6900
Number of the port through which the BTS is connected to the BSC Number of the FE or GE port Number of the Ethernet port. The number must be consistent with that of the port carrying the FE connection of the IP BTS. Maximum transmission delay of the POC service (push to talk over cellular). The transmission delay of the POC service must be relatively small. The network side must support the function of detecting the POC service type and reduce the delay through related processing to meet the POC service requirement. For the POC service received by the network side, Transfer Delay in the Maximum bandwidth of the POC service (push to talk over cellular). The transmission delay of the POC service must be relatively small. The network side must support the function of detecting the POC service type and reduce the delay through related processing to meet the POC service requirement. For the POC service received by the network side, GbrValue in the ABQP must be Minimum bandwidth of the POC service (push to talk over cellular). The transmission delay of the POC service must be relatively small. The network side must support the function of detecting the POC service type and reduce the delay through related processing to meet the POC service requirement. For the POC service received by the network side, GbrValue in the ABQP must be
GBFD111202 GBFD111202
O&M of BTS
0~335
None None
None
BTS
None
BTS
O&M of BTS
0~1
None None
None
BTS
None
BTS
This paramete r can be modified only when the BTS is The transport path should deactivat be re-established after the ed. parameter modification. None The BTS should be reset to validate the parameter None modification. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
PN
Port No.
BSC6900
GBFD111202
O&M of BTS
0~1
None None
None
BTS
None
BTS
None
Radio
POCDELAY
BSC6900
GBFD119905
PoC QoS
250~650
None None
650 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD119905
PoC QoS
6~120
None None
16 Cell
None
Not involved
Not involved
None
Radio
POCGBRMI N
GBFD119905
PoC QoS
6~120
None None
6 Cell
None
Not involved
Not involved
None
Radio
PocSup
POC Support
BSC6900
Whether to support the SET push to talk GCELLPSOTHE over cellular RPARA(Optional (POC) ) service.
GBFD119905
PoC QoS
Enumeration Type
Support
Cell
None
Not involved
Not involved
None
Radio
PODECTHR ES
BSC6900
This parameter specifies a condition for generating a BTS alarm. When the output power of a TRX of a transmitter is lower than a fixed level, an error is generated. This parameter and "Power output error threshold" indicate the two thresholds of the error. If this parameter is set to a great value, the error is small. The value range SET is 0 to 9, GCELLOTHEXT( indicating -10 GBFDOptional) dB to -1 dB. 111202
O&M of BTS
0~9
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page213of316
150682621.xls.ms_office
Security Level:
POERRTHR ES
BSC6900
BSC6900
This parameter specifies a condition for generating a BTS alarm. When the output power of a TRX of a transmitter is lower than a fixed level, an error is generated. This parameter and "Power output reduction threshold" indicate the two thresholds of the error. If this parameter is set to a great value, the error is small. The value range SET is 0 to 9, GCELLOTHEXT( indicating -10 Optional) dB to -1 dB. ADD description of ROLLBACKPOI the rollback NT(Optional) point. BEG ROLLBACK(Man datory) BEG FORWARD(Man datory) ADD name of the ROLLBACKPOI rollback NT(Mandatory) point.
GBFD111202 MRFD210301
0~9
None None
None
Cell
None
Not involved
Not involved
String Type
None
0~250 characters
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
If this paramete r is set to a greater value, the The parameter modification error is has no impact on the small. equipment. None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
BSC6900
MRFD210301
Configuration Management
String Type
None
1~250 characters
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
Port
Destination Port
BSC6900
This port is provided by the FTP ADD server to be FTPSCLTDPOR visited by the GBFDT(Mandatory) FTP client. 111203 Number of the port where to set up the link after the BTS ring is swapped. If this parameter is set to 0, the BTS works on a forward ring. If this parameter is set to 1, the BTS works SWP on a BTSRING(Optio backward nal) ring. Number of the port where to set up the link after the main and backup SWP OMLs of the BTSOMLLINK(O BTS are ptional) swapped Number of ADD the port that DXXCONNECT( is connected Mandatory) to the DXX Maximum number of ADD ports on the DXX(Optional) DXX
O&M of BSC
21~65535
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
PORT
Port
BSC6900
GBFD117801
Ring Topology
0~1
None None
None
BTS
None
Not involved
Not involved
Not involved
None
Equipme nt
PORT
Port
BSC6900
GBFD113728
OML Backup
0~1
None None
None
BTS
None
Not involved
Not involved
Not involved
None
Equipme nt
PORTNO
BSC6900
GBFD111203
O&M of BSC
0~15
None None
None
BTS
None
BTS
None
The BTS should be reset to validate the parameter modification. None The transport path should be re-established after the parameter modification.
Radio
PORTNUM
BSC6900
GBFD111203
O&M of BSC
1~16
None
16
16 BTS
None
BTS
None
None
Radio
PORTPROT YPE
BSC6900
ADD PORTFLOWCT RLPARA(Mandat Port protocol ory) type None Whether to enable the panel port of the SET XPUa/XPUb/ XPUPORT(Mand SPUa/SPUb MRFDatory) board 210301 Indicates the type of the physical port used by the local maintenance point in the maintenance group. FE indicates the FE port and TRUNK ADD indicates the ETHMEP(Manda aggregation tory) group. Type of the port. If this parameter is set to "TOPEXTOU TPORT", the local E1/T1 ports are used to extend the transmission of other boards. That is, the timeslots on the source E1/T1 port are used by other boards through the extended E1/T1 port. If this parameter is set to "TOPEXTINP ORT", the local E1/T1 ports are used to extend the ADD transmission BTSTOPCONFI of local G(Mandatory) boards. That LOD BTSPATCH(Man datory) CON Type of the BTSPATCH(Man patch datory) operation
None
Enumeration Type
None None
None
BSC69 00 None
Not involved
Not involved
This paramete r can be added and modified. It cannot The parameter modification be has no impact on the deleted. equipment. None
Transpor t
PortSwitch
BSC6900
Configuration Management
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None None
None
None
None
Not involved
Not involved
None
Equipme nt
PORTTYPE
Port Type
BSC6900
GBFD118630
Ethernet OAM
Enumeration Type
ETHER, TRUNK
ETHER, TRUNK
None None
None
Not involved
Not involved
Not involved
None
Transpor t
PORTTYPE
Port Type
BSC6900
MRFD211501
TOPEXTOUTPO RT(TOP Extended Out Port), TOPEXTINPORT (TOP Extended TOPEXTOUTPORT, In Port) TOPEXTINPORT None None
None
BTS
None
Not involved
Not involved
None
Radio
POT
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
POWER
Rated Power
BSC6900
SET BTSAPMUBP(O ptional) ADD EMU(Optional) ADD EMU(Optional) ADD EMU(Optional) ADD EMU(Optional) ADD EMU(Optional) ADD EMU(Optional) SET BTSPMUBP(Opti onal)
Rated maximum output power of the diesel engine. Refer to the rated output power described on the diesel GBFDengine label. 111202 Relay switch MRFD1 210301 Relay switch MRFD2 210301 Relay switch MRFD3 210301 Relay switch MRFD4 210301 Relay switch MRFD5 210301 Relay switch MRFD6 210301 Battery current shunt GBFDcoefficient 111202
O&M of BTS Configuration Management Configuration Management Configuration Management Configuration Management Configuration Management Configuration Management
Interval Type 1~1000 Enumeration Type Enumeration Type Enumeration Type Enumeration Type Enumeration Type Enumeration Type CLOSE(Close), OPEN(Open) CLOSE(Close), OPEN(Open) CLOSE(Close), OPEN(Open) CLOSE(Close), OPEN(Open) CLOSE(Close), OPEN(Open) CLOSE(Close), OPEN(Open)
0.1~100
kVA
None
125 BTS
None
Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write
Not involved
Not involved
None
POWER_RE LAY1 Switch for Relay 1 POWER_RE LAY2 Switch for Relay 2 POWER_RE LAY3 Switch for Relay 3 POWER_RE LAY4 Switch for Relay 4 POWER_RE LAY5 Switch for Relay 5 POWER_RE LAY6 Switch for Relay 6 POWERCUR Battery Shunt RENTDIV Coefficient
BSC6900
CLOSE, OPEN
None CLOSE
None
None
None
Not involved
Not involved
None
BSC6900
CLOSE, OPEN
None CLOSE
None
None
None
Not involved
Not involved
None
BSC6900
CLOSE, OPEN
None CLOSE
None
None
None
Not involved
Not involved
None
BSC6900
CLOSE, OPEN
None CLOSE
None
None
None
Not involved
Not involved
None
BSC6900
CLOSE, OPEN
None CLOSE
None
None
None
Not involved
Not involved
None
BSC6900
CLOSE, OPEN
None CLOSE
None
None
None
Not involved
Not involved
None
BSC6900
O&M of BTS
0~1000
None
100 None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
None
None
None
None
None
None
None
6/9/2013
Page214of316
150682621.xls.ms_office
Security Level:
16QAM transmitter power reduce level of TS 7 of the BCCH. When the EDGE transmitter sends signals in 16QAM modulation mode, the EDGE transmitter adopts the power that is lower than the mean power of the GMSK modulation mode. Therefore, SET this GCELLBASICPA parameter is GBFDRA(Optional) required. 510804 32QAM transmitter power reduce level of TS 7 of the BCCH. When the EDGE transmitter sends signals in 32QAM modulation mode, the EDGE transmitter adopts the power that is lower than the mean power of the GMSK modulation mode. Therefore, SET this GCELLBASICPA parameter is GBFDRA(Optional) required. 510804
Downlink EGPRS2-A
dB
None
0 Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
Downlink EGPRS2-A
dB
None
0 Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
POWER_48_24( 48/24 Power Module), POWER_240_24 (240/24 Power POWER_48_24, Module) POWER_240_24 220VAC(220V AC), N48VDC(48V DC), P24VDC(+24V DC)
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
POWL
Power Level
BSC6900
Transmit power level of the TRX. If this parameter is greater, the transmit power of the TRX is lower. If this parameter is set to 0, the TRX transmits at the highest power. At each level, SET the power is GTRXDEV(Optio decreased MRFDnal) by 2 dB. 210301
Configuration Management
POWT
Power Type
BSC6900
Maximum power supported by the TRX. The macro BTSs and BTS3002C mini BTS support different power types. If this parameter is not set, the actual power SET type of the GTRXDEV(Optio TRX board is MRFDnal) used. 210301 GBFD118611 GBFD118622 GBFD118611 GBFD118622
Configuration Management Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1
Interval Type 0~13 80W(80W), 63W(63W), 60W(60W), 55W(55W), 50W(50W), 45W(45W), 40W(40W), 31W(31W), 30W(30W), 27W(27W), 26W(26W), 25W(25W), 24W(24W), 21W(21W), 20W(20W), 19W(19W), 18W(18W), 17W(17W), 16W(16W), 15W(15W), 14W(14W), 13_3W(13.3W), 13W(13W), 12_5W(12.5W), 12W(12W), 11_5W(11.5W), 11W(11W), 10W(10W), 9_5W(9.5W), 9W(9W), 8_5W(8.5W), 8W(8W), Enumeration 7_5W(7.5W), Type 7W(7W),
0~13
None None
None
TRX
None
Not involved
Not involved
None
Radio
80W, 63W, 60W, 55W, 50W, 45W, 40W, 31W, 30W, 27W, 26W, 25W, 24W, 21W, 20W, 19W, 18W, 17W, 16W, 15W, 14W, 13_3W, 13W, 12_5W, 12W, 11_5W, 11W, 10W, 9_5W, 9W, 8_5W, 8W, 7_5W, 7W, 6_5W, 6W, 5_5W, 5W, 4_5W, 4W, 3_7W, 3_1W, 3W, 2_5W, 2W, 200mW, DEFAULT None None
None
TRX
None
Not involved
Not involved
None
Radio
PPPLNKN
BSC6900
0~499
None None
None
PPP link
None
Not involved
Not involved
Not involved
None
Transpor t
PPPLNKN
BSC6900
PPPLNKN
BSC6900
ADD MPLNK(Optional PPP link ) number ADD IPLOGICPORT( PPP link Optional) number ADD BTSPPPLNK(Ma ndatory) ADD BTSMPLNK(Man Number of datory) the PPP link
0~499
None None
None
None
None
0~499
None None
None
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
PPPLNKN
BSC6900
GBFD118611
0~15
None None
None
PPP link
None
Not involved
Not involved
Not involved
Not involved
Transpor t
PPPMUX
PPP mux
BSC6900
If this parameter is to ENABLE, the multiplexing frame function of the PPP link is enabled. If this parameter is to DISABLE, the multiplexing frame GBFDfunction of 118611 the PPP link GBFDis disabled. 118622
Enumeration Type
None Enable
Enable
PPP link
None
Not involved
Not involved
Not involved
None
Transpor t
PPPMUX
PPP mux
BSC6900
If this parameter is to ENABLE, the multiplexing frame function of the PPP link is enabled. If this parameter is to DISABLE, the multiplexing frame GBFDADD function of 118611 MPGRP(Optiona the PPP link GBFDl) is disabled. 118622 This parameter is valid only when the port flow control type is IP. The "PQNUM" of an ATM queue is "2" ADD by default. PORTFLOWCT You cannot RLPARA(Option change the al) default value. None If this parameter is set to ON, the BSC initiates a TCHF preemption when receiving a link establishmen t indication from an MS in an emergency GBFDcall. 110202
Enumeration Type
None Disable
Disable
MP group
None
Not involved
Not involved
ENABLE: the multiplexi ng frame function of the PPP link is enabled. DISABLE : the multiplexi ng frame function of the PPP link The parameter modification is has no impact on the disabled. equipment. None
Transpor t
PQNUM
BSC6900
None
0~5
None
When the value of "PORTPROTYPE" in "ADD PORTFLOWCTRLPARA BSC69 " is set to IP, this Read & 2 00 parameter should be set. Write
Not involved
Not involved
This paramete r can be added or modified but cannot The parameter modification be has no impact on the removed. equipment. None
Transpor t
BSC6900
OFF(Off), ON(On)
OFF, ON
None None
None
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page215of316
150682621.xls.ms_office
Security Level:
BSC6900
1~255
None None
BSC69 1 00 None
Not involved
Not involved
When the sampling rate of preprocesse d measure ment reports is set to 1, the frequenc y of submittin g preprocesse d measure ment reports should be set to one report per two seconds or one report The parameter modification per four has no impact on the seconds. equipment. None
Radio
PRI
Route PRI
BSC6900
BSC6900
A smaller value indicates a higher priority. The BTS preferentially selects the route with a ADD high priority BTSIPRT(Option to transfer al) information. Access priority of the MS that is allowed to access the cell. The MS sends the packet channel request containing the 2-bit radio priority message. The priority of the 2-bit radio priority message ranges from 1 to 4 in descending order. During the MS access, the BSC compares the radio priority in the channel request with the SET parameter GCELLPSBASE( setting of the Optional) cell. If the
GBFD118601
Abis over IP
0~255
None
60
60 BTS
None
Not involved
Not involved
None
Radio
GBFD114101
GPRS
Enumeration Type
0(No packet access), 3(Packet access of level 1), 4(Packet access of levels 1-2), 5(Packet access of levels 1-3), 6(Packet access of level 1-4) 0, 3, 4, 5, 6
None None
6 Cell
None
Not involved
Not involved
None
Radio
PRIFCEN
BSC6900
BSC6900
This parameter specifies whether to support flow control based on priority. When this parameter is set to on, the system preferentially SET admits the BSCFCPARA(O calls initiated GBFDptional) by VIP users. 111705 Whether the BTSs send the original measurement reports to the BSC after preprocessing them. When this parameter is set to YES, the BTSs sends the original and preprocessed SET measurement GCELLHOCTRL reports to the GBFD(Optional) BSC. 110802 Printing control threshold. If the CPU usage of sliding windows reaches or exceeds the threshold, printing flow control is SET triggered on FCCPUTHD(Opti the serial onal) port.
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Radio
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter must be set when "BTSMESRPTPREPRO C" is set to BTS_Preprocessing. This parameter must be set to NO when "MPMODE" of the BTS that serving this cell is set to MODE4_1 and there are more than two SDCCHs.
Not involved
Not involved
None
Radio
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
60 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
Printing control threshold. When the packet queue usage of sliding windows reaches or exceeds the threshold, printing flow control is SET triggered on FCMSGQTHD(O the serial WRFDptional) port. 040100 Printing control threshold. If the CPU usage of sliding windows is lower than the threshold, printing flow SET control on the FCCPUTHD(Opti serial port is WRFDonal) stopped. 040100 Printing control threshold. When the packet queue usage of sliding windows is lower than the threshold, printing flow SET control on the FCMSGQTHD(O serial port is WRFDptional) stopped. 040100 Whether to control the printing flow SET on the serial FCSW(Optional) port
Flow Control
30~100
per cent
None
72 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
Flow Control
30~100
per cent
None
50 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
Flow Control
30~100
per cent
None
65 Board
None
Not involved
Not involved
None
Equipme nt
PRINTSW
BSC6900
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
PRIOR
Cell Priority
BSC6900
This parameter controls handover between cells at the same layer. Generally, the cells at the same layer have the same priority. If the cells at the same layer have different priorities, the cell with a GBFDSET smaller value 110601 GCELLBASICPA has a higher GBFDRA(Optional) priority. 510501
Enumeration Type
PRIOR-1(Priority1), PRIOR2(Priority-2), PRIOR-3(Priority3), PRIOR4(Priority-4), PRIOR-5(Priority5), PRIOR6(Priority-6), PRIOR-7(Priority7), PRIOR8(Priority-8), PRIOR-9(Priority9), PRIOR10(Priority-10), PRIOR11(Priority-11), PRIOR12(Priority-12), PRIOR13(Priority-13), PRIOR14(Priority-14), PRIOR15(Priority-15), PRIOR16(Priority-16)
PRIOR-1, PRIOR-2, PRIOR-3, PRIOR-4, PRIOR-5, PRIOR-6, PRIOR-7, PRIOR-8, PRIOR-9, PRIOR10, PRIOR-11, PRIOR-12, PRIOR13, PRIOR-14, PRIOR-15, PRIOR16 None None
None
Cell
None
Not involved
Not involved
The parameter modification has no impact on the None equipment. None Each layer has 16 priorities, numbere d 1-16 respectiv ely. If the number of the priority is small, the priority is high. This paramete r along with Layer of the Cell determin es the priority of a cell. The priority affects the sequence of neighbori ng cells for The parameter modification handover has no impact on the . It also equipment. None
Equipme nt
Radio
6/9/2013
Page216of316
150682621.xls.ms_office
Security Level:
PRIOR
Cell priority
BSC6900
BSC6900
This parameter controls the handovers among cells on a same layer. A smaller priority value indicates a higher priority. Cells with higher priorities are preferentially ADD selected as GEXT2GCELL( the handover Optional) target cells. If the static Abis resource load is greater than the value of "Fix Abis Prior Choose Abis Load Thred" and the dynamic Abis resource load is greater than the value of this parameter, the half-rate channel is preferred. Otherwise, SET the full-rate BTSFLEXABISP channel is ARA(Optional) preferred.
GBFD110601 GBFD510501
Enumeration Type
Prior-1, Prior-2, Prior-3, Prior-4, Prior-5, Prior-6, Prior-7, Prior-8, Prior-9, Prior-10, Prior-11, Prior12, Prior-13, Prior-14, Prior15, Prior-16
Prior-1, Prior-2, Prior-3, Prior-4, Prior-5, Prior-6, Prior-7, Prior-8, Prior-9, Prior-10, Prior-11, Prior-12, Prior-13, Prior-14, Prior-15, Prior-16
None None
Prior-1
Cell
This parameter, together with "LAYER", determines the priority of Read & the cell. Write
Not involved
Not involved
None
Radio
GBFD117301
Flex Abis
0~100
per cent
None
None
BTS
None
Not involved
Not involved
None
Radio
BSC6900
Priority of the hierarchical cell structure (HCS). 0: indicates the lowest priority; SET 7: indicates GCELLSERVPA the highest GBFDRA(Optional) priority. 114101
GPRS
Enumeration Type
0(0), 1(1), 2(2), 3(3), 4(4), 5(5), 6(6), 7(7), nouse(no use)
2 Cell
None
Not involved
Not involved
None
Radio
PRIORITY
Route priority
BSC6900
ADD MTP3RT(Option al) ADD M3RT(Optional) ADD MTP3LNK(Optio nal) ADD M3LNK(Optional )
None
None
0~99
None
MTP3 0 link
None
Not involved
Not involved
The routing priority is modified. In the case of multiple routes to the same signaling point, the route The parameter modification priority is has no impact on the affected. equipment. None
Transpor t
PRIORITY
BSC6900
PRIORITY
BSC6900
PrivKey
BSC6900
Priority of the signaling link. 0 indicates the highest priority. Route priority. The boards FG2a, GOUa, UOIa(IP), FG2c, and GOUc support the configuration of routes with different priorities. Suppose two or more routes are configured and their addresses and masks are the same, and the addresses of the next hops and priorities. These routes can be configured in the active and standby ADD mode. When IPRT(Mandatory the route with ) higher priority SET Name of the CERTFILE(Optio private key nal) file
None
None
0~99
None
0 None
None
Not involved
Not involved
None
Transpor t
None MRFD210305
Enumeration Type
HIGH, LOW
HIGH, LOW
None None
None
IP route
None
Not involved
Not involved
Not involved
String Type
None
0~200 characters
None None
None
RNC
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Equipme nt
PROT
BSC6900
To identify the DSP protocol type,including ITUT(Internat ional Telecommuni cation Union Telecommuni cation Standardizati on Sector),ANSI (American National Standards Institute) and TTC(Teleco mmunication ADD Technology N7DPC(Optional Committee ) (Japan)). None Protocol type of the trunk GBFDframe. 510002
None
Enumeration Type
None ITUT
ITUT
SCCP
None
Not involved
Not involved
PROT
BSC6900
ADD BC(Optional)
Gb Over FR
Enumeration Type
Q933(Q933), ANSI(Ansi)
Q933, ANSI
None Q933
Q933
BC
None
BC
Not involved Services are interrupted until the parameter is consistent with the SGSN at the peer end.
None
Transpor t
None
Transpor t
PROTECTD ELAYTIME
BSC6900
The transmission resource in the Abis timeslot is considered as faulty only when the BTS detects that the Abis timeslot is faulty in the delay. The transmission resource in the Abis timeslot is considered as normal when the BTS detects SET the Abis BTSABISTROP( timeslot is Optional) normal. None After a cell is turned on, it cannot be turned off in "Dyn. Turning Off Cell Protection Time"; after a cell is turned off, it cannot be turned on in "Dyn. Turning SET Off Cell GCELLDYNTUR Protection NOFF(Optional) Time". To prevent the BSC from frequently disabling or enabling the power amplifier of a carrier, the system disallows the BSC from disabling the power amplifier of the carrier within the time specified by this parameter SET after the BSCDSTPA(Opti carrier is onal) powered on. SET E1T1(Optional) CHK E1T1CRS(Mand Port atory) selection
None
5~300
None
BSC69 15 00 None
Not involved
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
BSC6900
GBFD111610
0~255
min
None
5 Cell
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
GBFD111602
Interval Type 60~3600 ALL(Select all ports), SINGLE(Select one port) ALL(Select all ports), SINGLE(Select one port)
60~3600
None
Not involved
Not involved
None
Equipme nt
PS
Port select
BSC6900
None
None
Enumeration Type
ALL, SINGLE
None None
ALL
E1/T1 port
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
PS
Port select
BSC6900
SET OPT(Optional)
Port selection
None
None
Enumeration Type
ALL, SINGLE
None None
None
Board
None
Not involved
Not involved
Not involved
None
Equipme nt
6/9/2013
Page217of316
150682621.xls.ms_office
Security Level:
PS
Port select
BSC6900
None
None
Enumeration Type
ALL(Select all E1/T1 ports), PORT(Select all E1/T1 ports of one channelized optical port), SINGLE(Select one E1/T1 port)
None None
ALL
Not involved
Not involved
PSBKGDL
BSC6900
WCDMA R99 PS background ADD service TRMFACTOR(O downlink ptional) factor None
None
0~100
per cent
100
Not involved
Not involved
BSC6900
R99 PS background ADD service TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF13. When the interface type is Iu-PS, the parameter is AF13.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR or IUPS, Read & 00 this parameter is valid. Write
Not involved
Not involved
PSBKGSEC PATH
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF13; transimssion type is Hybird IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
PSBKGUL
BSC6900
WCDMA R99 PS ADD background TRMFACTOR(O service uplink ptional) factor None
None
0~100
per cent
100
Not involved
Not involved
PSCONVDL
BSC6900
WCDMA R99 PS conversation ADD al service TRMFACTOR(O downlink ptional) factor None
None
0~100
per cent
70
BSC69 70 00 None
Not involved
Not involved
1. This comman d is applicabl e to the boards AOUa and POUa. 2. It is used for interwork ing with products of other manufact urers. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
6/9/2013
Page218of316
150682621.xls.ms_office
Security Level:
BSC6900
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. When the interface type is Iu-PS, the parameter is AF43.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR or IUPS, Read & 00 this parameter is valid. Write
Not involved
Not involved
PSCONVSE CPATH
BSC6900
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
PSCONVUL
BSC6900
WCDMA R99 PS ADD conversation TRMFACTOR(O al service ptional) uplink factor None
None
0~100
per cent
70
BSC69 70 00 None
Not involved
Not involved
PSDATADL
BSC6900
None
None
0~100
per cent
100
Not involved
Not involved
PSDATAUL
BSC6900
None
None
0~100
per cent
100
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
PSHOSUP
PS Handover Support
BSC6900
ADD NSE(Optional)
Whether to support PS Handover(PS HO). The PS HO is used to reduce the interval of the cell reselection of GBFDthe MS. 119502
PS Handover
Enumeration Type
None NO
NO
NSE
None
NSE
The SIGBVC must be reset after this switch is turned on. The BSC supports the PS HO when the SGSN supports The transport path should the PS be re-established after the HO. parameter modification.
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page219of316
150682621.xls.ms_office
Security Level:
BSC6900
None
None
Enumeration Type
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
None None
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to ABIS, this parameter Read & 00 is valid. Write
Not involved
Not involved
BSC6900
None
None
0~7
None None
When the interface type is Abis and When the value of "ITFT" transmission type is in "ADD TRMMAP" is set HDLC, the parameter BSC69 to ABIS, this parameter Read & is 0. 00 is valid. Write
Not involved
Not involved
PSHPSP
BSC6900
Priority of the ADD PS high GCELL(Optional priority GBFD) service 111705 Period for sending the packet message PSI. If the period is too long, the message PSI cannot be obtained in realtime. If the period is too short, the message PSI is broadcast frequently, which SET occupies too GCELLPSI1(Opt much system GBFDional) resources. 119102
0~7
None
4 Cell
None
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. If this paramete r is set to a larger value, more packets are discarde d when the congestio n occurs. Thus, the priority value of the major service should be smaller than that of the minor service.
Transpor t
Transpor t
Radio
PSI1RPT
BSC6900
1~16
None None
6 Cell
None
Not involved
Not involved
PSINTERDL
BSC6900
WCDMA R99 PS interactive ADD service TRMFACTOR(O downlink ptional) factor None
None
0~100
per cent
100
Not involved
Not involved
PSINTERUL
BSC6900
WCDMA R99 PS ADD interactive TRMFACTOR(O service uplink ptional) factor None
None
0~100
per cent
100
Not involved
Not involved
BSC6900
R99 PS high ADD PRI TRMMAP(Option interactive al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF33. When the interface type is Iu-PS, the parameter is AF33.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR or IUPS, Read & 00 this parameter is valid. Write
Not involved
Not involved
None The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Radio
Transpor t
Transpor t
Transpor t
6/9/2013
Page220of316
150682621.xls.ms_office
Security Level:
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF33; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
R99 PS low ADD PRI TRMMAP(Option interactive al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF33. When the interface type is Iu-PS, the parameter is AF33.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR or IUPS, Read & 00 this parameter is valid. Write
Not involved
Not involved
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF33; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
PSINTMIDP RIPATH
BSC6900
R99 PS ADD middle PRI TRMMAP(Option interactive al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF33. When the interface type is Iu-PS, the parameter is AF33.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR or IUPS, Read & 00 this parameter is valid. Write
Not involved
Not involved
PSINTMIDS ECPATH
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF33; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
Whether the BSC supports the state message PSI. The state SET message PSI GCELLPSI1(Opt refers to PSI GBFDional) STATUS. 119102
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
PSLPRIDAT APATH
BSC6900
None
None
Enumeration Type
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
None None
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to ABIS, this parameter Read & 00 is valid. Write
Not involved
Not involved
None The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Radio
Transpor t
6/9/2013
Page221of316
150682621.xls.ms_office
Security Level:
PSLPRIDAT APRI
BSC6900
None
None
0~7
None None
When the interface type is Abis and When the value of "ITFT" transmission type is in "ADD TRMMAP" is set HDLC, the parameter BSC69 to ABIS, this parameter Read & is 0. 00 is valid. Write
Not involved
Not involved
PSLPSVP
BSC6900
Priority of the ADD PS low GCELL(Optional priority GBFD) service 111705 Threshold of the receive level for triggering the handover of the PS services from the overlaid subcell to the underlaid subcell. None
0~7
None
6 Cell
None
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. If this paramete r is set to a larger value, more packets are discarde d when the congestio n occurs. Thus, the priority value of the major service should be smaller than that of the minor service.
Transpor t
Radio
BSC6900
None
0~63
None None
25 Cell
None
Not involved
Not involved
None
Radio
PSRACHAC CLEV
BSC6900
PSRACHAC CLEV
BSC6900
Minimum access level of the random access channel SET (RACH) in GCELLCCACCE the PS SS(Optional) domain Level threshold of the MS random access in the PS domain. For the BTS3X and the doubletransceiver BTSs, this parameter settings affect the MS access. If the receive level of the RACH burst is lower than RACH Min.Access Level, the BTS regards this access as an invalid one and no decoding is performed. If the receive level of the RACH burst is higher than SET RACH Min. GCELLRACHCC Access LEV(Optional) Level, the
GBFD119110
Access
-121~-109
dBm None
-115 Cell
The value of this parameter must be smaller than "RACH Busy Threshold" in the "SET GCELLCCBASIC" Read & command. Write
Not involved
Not involved
This paramete r should be set on the basis of the actual receiver sensitivity of the BTS and the minimum access level of the MS to avoid the situation where a call cannot be made even though If this parameter is set to a greater value, there are The parameter modification the call drop rate decreases but the traffic signals has no impact on the volume and paging success rate are Versions earlier than detected. equipment. affected. BSC6900 V900R011
Radio
GBFD111003
-121~-47
dBm None
-109 Cell
The value of this parameter must be smaller than "RACH Busy Threshold" in the "SET GCELLCCBASIC" Read & command. Write
Not involved
Not involved
This paramete r should be set on the basis of the actual receiver sensitivity of the BTS and the minimum access level of the MS to avoid the situation where a call cannot be made even though If this parameter is set to a greater value, there are The parameter modification the call drop rate decreases but the traffic signals has no impact on the volume and paging success rate are Versions earlier than detected. equipment. affected. BSC6900 V900R011
Radio
BSC6900
Minimum voltage level for accessing PS services ADD of the BTSLOCGRP(O location GBFDptional) group 510104 Maximum number of messages in the statistical period for the arrival of PS resource GBFDrequests 111705 Statistical period for the arrival of PS resource GBFDrequests 111705
Multi-site Cell
-121~-47
dBm None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
10~10000
None None
Not involved
Not involved
None
Equipme nt
100~600000
ms
None
None
BSC69 00 None
Not involved
Not involved
PSSTRMDL
BSC6900
WCDMA R99 PS streaming ADD service TRMFACTOR(O downlink ptional) factor None
None
0~100
per cent
100
Not involved
Not involved
None The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h The parameter modification modificati has no impact on the on of the equipment. None
Equipme nt
Transpor t
6/9/2013
Page222of316
150682621.xls.ms_office
Security Level:
BSC6900
R99 PS streaming ADD service TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. When the interface type is Iu-PS, the parameter is AF43.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR or IUPS, Read & 00 this parameter is valid. Write
Not involved
Not involved
PSSTRMSE CPATH
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
PSSTRMUL
BSC6900
WCDMA R99 ADD PS streaming TRMFACTOR(O service uplink ptional) factor None Whether to enable the DPSU0 to supply power for the BTS. In multi-mode scenario, the value of this parameter in this mode must be the SET same as the BTSAPMUBP(O value of the ptional) correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Whether to enable the DPSU1 to supply power for the BTS. In multi-mode scenario, the value of this parameter in this mode must be the SET same as the BTSAPMUBP(O value of the ptional) correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Whether to enable the DPSU2 to supply power for the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202
None
0~100
per cent
100
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the
Transpor t
Transpor t
Transpor t
PSU0
DPSU 0 Configured
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
PSU1
DPSU 1 Configured
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
PSU2
DPSU 2 Configured
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
For "APMU Board Type" is "APM30" or "APM4815", the recommended value is "NO". For other types of APMU boards, the recommended value is "YES".
BTS
None
Not involved
Not involved
None
Equipme nt
PSU2
DPSU 2 Configured
BSC6900
Whether to enable the DPSU2 to supply power for the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Whether to enable the DPSU3 to supply power for the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Whether to enable the DPSU4 to supply power for the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
PSU3
DPSU 3 Configured
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
PSU4
DPSU 4 Configured
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page223of316
150682621.xls.ms_office
Security Level:
PSU5
DPSU 5 Configured
BSC6900
Whether to enable the DPSU5 to supply power for the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Whether to enable the DPSU6 to supply power for the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Whether to enable the DPSU7 to supply power for the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Threshold of the receive level for triggering the handover of the PS services from the underlaid subcell to the overlaid subcell. None Whether to enable intelligent shut-down of GBFDthe PSU 111608 Port type of environment MRFDalarm 210304
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
PSU6
DPSU 6 Configured
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
PSU7
DPSU 7 Configured
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
None
0~63
None None
35 Cell
None
Not involved
Not involved
None
Radio
BSC6900
PT
Port Type
BSC6900
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
BOOL, VALUE
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
PT
Port
BSC6900
PT
BSC6900
Number of the port that provides the time ADD information SNTPSRVINFO( on the SNTP Mandatory) server Cell Reselect Penalty Time (PT) is used to ensure the safety and validity of cell reselection because it helps to avoid frequent cell reselection. For details, SET see GSM GCELLIDLEAD( Rec. 05.08 Optional) and 04.08.
GBFD111203
O&M of BSC
123~65534
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
GBFD110402
0~31
None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the The setting of this parameter affects the equipment. GSM Phase II MS.
Radio
PT
BSC6900
PT
Port Type
BSC6900
Subnet ADD protocol NSE(Mandatory) type. SET BTSENVALMPO Alarm port RT(Optional) type
GBFD119001 MRFD210304
GB_OVER_FR( Gb over FR), GB_OVER_IP(G GB_OVER_FR, b over IP) GB_OVER_IP BOOL(BOOL), VALUE(VALUE)
None None
None
NSE
None
Not involved
Not involved
Not involved
BOOL, VALUE
None None
None
BTS
None
Not involved
Not involved
PTCODE
Line code
BSC6900
SET E1T1(Optional)
None
None
Enumeration Type
B8ZS(B8ZS), HDB3(HDB3), AMI(AMI), AMI_ZCS(AMI_Z B8ZS, HDB3, AMI, CS) AMI_ZCS E1_DOUBLE_FR AME(E1_DOUBL E_FRAME), E1_CRC4_MULT I_FRAME(E1_C RC4_MULTI_FR AME), T1_SUPER_FRA ME(T1_SUPER_ FRAME), T1_EXTENDED_ SUPER_FRAME( T1_EXTENDED_ SUPER_FRAME) E1_DOUBLE_FR AME(E1_DOUBL E_FRAME), E1_CRC4_MULT I_FRAME(E1_C RC4_MULTI_FR AME), T1_SUPER_FRA ME(T1_SUPER_ FRAME), T1_EXTENDED_ SUPER_FRAME( T1_EXTENDED_ SUPER_FRAME) E1_DOUBLE_FR AME(E1_DOUBL E_FRAME), E1_CRC4_MULT I_FRAME(E1_C RC4_MULTI_FR AME), T1_SUPER_FRA ME(T1_SUPER_ FRAME), T1_EXTENDED_ SUPER_FRAME( T1_EXTENDED_ SUPER_FRAME)
None None
None
E1/T1 port
None
BSC6900
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None None The line equipment. code must be consisten t with that on the interconn ected side. HDB3 (HDB3 code) and AMI (AMI code) are used for E1 ports. B8ZS (B8ZS code) and AMI_ZC The parameter modification S (AMI has no impact on the code) equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
Transpor t
PTRXT
BSC6900
SET E1T1(Optional)
None
None
Enumeration Type
None
E1/T1 port
None
BSC6900
The frame structure must be consisten t with that on the interconn The parameter modification ected has no impact on the side. equipment. None
Transpor t
PTTXT
BSC6900
SET E1T1(Optional)
None
None
Enumeration Type
None
E1/T1 port
None
BSC6900
The frame structure must be consisten t with that on the interconn The parameter modification ected has no impact on the side. equipment. None
Transpor t
PTTYPE
Frame Structure
BSC6900
SET E1T1(Optional) ADD BTSABISHDLCP ATH(Mandatory) ADD BTSBIND2HDLC PATH(Mandator y) ADD GTRXBIND2HDL CPATH(Mandato ry) SET ETHPORT(Mand atory)
Frame structure
None
None
Enumeration Type
None
BSC6900
The frame structure must be consisten t with that on the interconn The parameter modification ected has no impact on the side. equipment. None
Transpor t
PTUID
BSC6900
Number of a BTS HDLC path. It is unique in one GBFD[BTS]. 118401 Ethernet port type None Power system type. When the PMU is installed on the rack, you can select the custom power system type. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202
0~15
None None
None
BTS
None
Not involved
Not involved
None
PTYPE
Port type
BSC6900
None
FE, GE
FE, GE
None None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Transpor t
PTYPE
BSC6900
PubCert
BSC6900
SET BTSAPMUBP(O ptional) SET CERTFILE(Optio Name of the MRFDnal) certificate file 210305
Enumeration Type
APM100(APM10 0), APM200(APM20 0), APM30(APM30), PS4890(PS4890 ), EPS4815(EPS48 15), SC48200~5||(SC 48200)$$(SC482 00)** CUSTOM(SC482 00)** APM100, APM200, CUSTOM~100||( APM30, PS4890, )$$(C EPS4815, SC48200, USTOM) CUSTOM None None
None
BTS
None
Not involved
Not involved
None
String Type
None
0~200 characters
None None
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
6/9/2013
Page224of316
150682621.xls.ms_office
Security Level:
PV
BTS patch No. for SET automatic BTSAUTODLDA BTS loading CTINFO(Optiona and l) activating LOD BTSPATCH(Man datory) CON Number of BTSPATCH(Man the patch datory) version Period timer of PVC utilization report. This timer is started during initialization. When the timer expires, the PVC SET utilization BSCPSSOFTPA information is RA(Optional) reported. SET CERTFILE(Mand Private key atory) password ADD OP(Mandatory) DLD LICENSE(Manda tory) ULD LICENSE(Manda tory) Password. DLD BTSSW(Mandat ory) DLD RETANTCFG(M andatory) ULD BTSDEVFILE(M andatory) DLD BTSPATCH(Man datory) ULD Password of BTSLOG(Manda the FTP tory) server SET PWDPOLICY(O ptional) STR BTSTST(Mandat ory) Minimum length of the user password
GBFD111202
O&M of BTS
String Type
None
1~50 characters
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
PV
Patch Version
BSC6900
GBFD110703
String Type
None
1~50 characters
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
PVC Utilization PVCUSERAT Report Period ETIMER Timer Private Key Password
BSC6900
GBFD510002 MRFD210305
1~65535
ms
None
500 BSC
None
Not involved
Not involved
None
PWD
BSC6900
None
0~64 characters
None None
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
PWD
Password
BSC6900
GBFD111203 MRFD210305
Password Type
None
1~32 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
PWD
User Password
BSC6900
GBFD110703
Password Type
None
1~32 characters
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Equipme nt
PwdMinLen
BSC6900
MRFD210305
PWL
Power Level
BSC6900
BSC6900
GBFDPower level 110703 Whether to allow active power control. If this parameter is set to YES, the system performs power forecast in the process of initial access assignment or service channel activation during intraBSC handovers, and sends the forecast initial power information to the BTSs through channel activation messages. In this way, the MSs and SET BTSs can GCELLPWRBAS adjust the GBFDIC(Optional) transmit 117602 Whether to enable the optimized SET power GCELLPWR3(O control ptional) algorithm III Whether to
6~32 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt Equipme nt
0~31
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Enumeration Type
None None
NO
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD117601
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
PWRCTRLS W
BSC6900
enable power control algorithm II SET or power GCELLPWRBAS control GBFDIC(Optional) algorithm III 110703 If a class 3 MS on the DCS1800 band does not receive the original power command after random access, the power that the MS uses is the MS maximum transmit power level plus the power calculated from the power deviation. For SET details, see GCELLCCACCE GSM Rec. GBFDSS(Optional) 05.08. 111003 The MS does not receive the original power command after random access. This parameter indicates whether the power deviation is added to the class 3 MS on the DCS1800 band on the basis of the SET maximum MS GCELLCCACCE transmit GBFDSS(Optional) power. 111003 Whether to enable the power amplifier for all location groups. 0x01 indicates that the TRX power amplifier is enabled for all location groups. 0x00 indicates that the TRX power amplifier is enabled for the current location GBFDgroup. 510104
Enumeration Type
PWR2, PWR3
None None
None
Cell
None
Not involved
Not involved
None
Radio
PWRDIV
Power Deviation
BSC6900
0~3
None None
1 Cell
None
Not involved
Not involved
None
Radio
BSC6900
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Multi-site Cell
Enumeration Type
OnlyCurPwrLoc( Only Current Working Location TRXes be Turned On), ALLPwrLoc(All Location TRXes OnlyCurPwrLoc, be Turned On) ALLPwrLoc CLASS0(Class0) , CLASS1(Class1) , CLASS0, CLASS1, CLASS2(Class2) CLASS2
None None
ALLPwrLoc
Cell
None
Not involved
Not involved
None
Equipme nt
PWRMODE
Power Class
BSC6900
BSC6900
GBFDPower mode. 111202 This parameter is valid in the BTSs that supports the backup SET power BTSBAKPWR(O decrease GBFDptional) function. 111605 Whether to use carriers with better power saving performance. When this parameter is set to YES, carriers with better power saving performance are selected GBFDpreferentially. 111005
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
0~720
min
None
5 BTS
This parameter is valid only when the cell parameter "BAKPWRSAVMETHOD Read & " is set to BYPWR. Write
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
PWRPRIOR ALLOW
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page225of316
150682621.xls.ms_office
Security Level:
PWRSPNR
Power Finetune
BSC6900
Find adjustment of the TRX power. During fine static adjustment of the TRX power, the BSC adjusts the TRX power at a step of 0.2 dB. In certain scenarios, for example, when the TRX contains a combination of tributaries, the TRX has varying losses. In addition, the power difference before and after the power output may not be SET an integral GTRXDEV(Optio multiple of 2 MRFDnal) dB. Thus, 210301 When the ANT_A tributary antenna power switch is ON, it is allowed to configure related SET parameters BTSRXUBP(Opti of the ANT_A GBFDonal) tributary. 111202 When the ANT_B tributary antenna power switch is ON, it is allowed to configure related SET parameters BTSRXUBP(Opti of the ANT_B GBFDonal) tributary. 111202 When the RET tributary antenna power switch is ON, it is allowed to configure related SET parameters BTSRXUBP(Opti of the RET GBFDonal) tributary. 111202 Minimum DSCP of queue 0. The IP packets with DSCP in a relation that "Min DSCP of queue 0" <= DSCP <= 63 is added to queue 0. Minimum DSCP of queue 1. The IP packets with DSCP in a relation that "Min DSCP of queue 1" <= DSCP < "Min DSCP of queue 0" is added to queue 1. Minimum DSCP of queue 2. The IP packets with DSCP in a relation that "Min DSCP of queue 2" <= DSCP < "Min DSCP of queue 1" is added to queue 2. Minimum DSCP of queue 3. The IP packets with DSCP in a relation that "Min DSCP of queue 3" <= DSCP < "Min DSCP of queue 2" is added to queue 3. Minimum DSCP of queue 4. The IP packets with DSCP in a relation that "Min DSCP of queue 4" <= DSCP < "Min DSCP of queue 3" is added to queue 4. Function set of the adjacent node supported by local BSC. When the parameter is set to CS1, it indicates that the local BSC is interconnecte d to the adjacent node by using the CS1 protocol version. When the parameter is set to CS1, it indicates that the local BSC is interconnecte d to the adjacent node by using the CS2 protocol version. The CS2 protocol version is
Configuration Management
Enumeration Type
DB0(0.0dB), DB2(-0.2dB), DB4(-0.4dB), DB6(-0.6dB), DB8(-0.8dB), DB10(-1.0dB), DB12(-1.2dB), DB14(-1.4dB), DB16(-1.6dB), DB18(-1.8dB), Default(Default)
DB0, DB2, DB4, DB6, DB8, DB10, DB12, DB14, DB16, DB18, Default
None None
None
TRX
None
Not involved
Not involved
None
If the value of this parameter is set The parameter modification inappropriately high or small, the BTS has no impact on the cabinet top output power is inconsistent equipment. with the TRX output power.
Radio
PwrSwitchA
O&M of BTS
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
BTS
None
Not involved
Not involved
None
Equipme nt
PwrSwitchB
O&M of BTS
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
BTS
None
Not involved
Not involved
None
Equipme nt
PwrSwitchR ET
BSC6900
O&M of BTS
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
BTS
None
Not involved
Not involved
BSC6900
None
None
0~63
None None
None
Port queue
None
Not involved
Not involved
BSC6900
None
None
0~63
None None
None
Port queue
None
Not involved
Not involved
BSC6900
None
None
0~63
None None
None
Port queue
None
Not involved
Not involved
BSC6900
None
None
0~63
None None
None
Port queue
None
Not involved
Not involved
BSC6900
None
None
0~63
None None
None
Port queue
None
Not involved
Not involved
QAAL2VER
BSC6900
None
None
Enumeration Type
CS1, CS2
None CS2
CS2
When the value of "NODET" in "ADD ADJNODE" is set to IUB, IUR, or IUCS, and the value of "IsROOTNODE" in "ADD ADJNODE" is set to YES, or the value of "NODET" in "ADD ADJNODE" is set to UNI_AAL2SWITCH or Adjace NNI_AAL2SWITCH, this Read & nt node parameter is valid. Write
Not involved
Not involved
None The transmiss ion priority of the service is affected if the queue DSCP value of the port is modified. The transmiss ion priority of the service is affected if the queue DSCP value of the port is modified. The transmiss ion priority of the service is affected if the queue DSCP value of the port is modified. The transmiss ion priority of the service is affected if the queue DSCP value of the port is modified. The transmiss ion priority of the service is affected if the queue DSCP value of the port is modified. When the paramete r is set to CS1, it indicates that the local RNC is interconn ected to the adjacent node by using the CS1 protocol version. When the paramete r is set to CS2, it indicates that the local RNC is interconn ected to the adjacent node by using the CS2 protocol version.
Equipme nt
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
QCI
Qsearch C Initial
BSC6900
Threshold of the signal level for cell reselection in connection GBFDSET mode before 114301 GCELLCCUTRA "Qsearch C" GBFDNSYS(Optional) is obtained 114302 Whether to enable the fast moving micro-cell handover algorithm. The fast moving microcell handover algorithm enables fast moving MSs to switch over to macro-cells, GBFDthus reducing 110601 the handover GBFDtimes. 510501
Enumeration Type
Use_Qsearch_I, Always
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page226of316
150682621.xls.ms_office
Security Level:
QCKSTATC NT
BSC6900
This parameter is used in the P/N criteria decision: If an MS quickly passes through N out of P microcells lately, the BSC enables the fast moving micro-cell handover algorithm. This parameter corresponds GBFDSET to the N in 110601 GCELLHOAD(O the P/N GBFDptional) criteria. 510501 A time threshold determined based on the radius of a cell and the moving speed of an MS. If the MS crosses the cell in a time period shorter than this threshold, the BSC concludes that the MS quickly passes through the cell. Otherwise, it concludes that the MS slowly passes the cell. This parameter is used in the P/N criteria decision: If an MS quickly passes through N out of P microcells lately, the BSC enables the fast moving micro-cell handover algorithm. This parameter corresponds to the P in the P/N criteria. Level threshold for cell reselection in idle mode. In idle mode, if the signal level in the serving cell is below [0, 7] or above [8, 15], the MS starts to search for 3G cells. For example, if this parameter is set to 5 and the signal level of the serving cell is lower than 5, the MS starts to search for 3G cells. If this parameter is set to 10 and the signal level of the serving cell is higher than 10, the MS For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. This parameter indicates the number of measurement reports used for the filtering of the signal quality on service or data channels. This parameter is used to determine whether interferences exist on For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. This parameter indicates the number of measurement reports used for the filtering of the signal quality on signaling channels. This parameter is used to determine whether interferences exist on channels. Whether to support QoC optimization. The GSN equipment for the GPRS provides flexible QoS mechanisms for different subscribers. The QoS level is also set during subscription. The QoS control parameters include: service priority, reliability level, delay level, and data throughput level. During QoS negotiation, the MS can apply for one value for each QoS attribute.
1~10
None None
3 Cell
This parameter is valid only when "QCKMVHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "QCKSTATCNT" >= "QCKTRUECNT".
Not involved
Not involved
None
If this parameter is set to a greater value, unnecessary handovers between micro cells are performed, thus affecting the The parameter modification voice quality. If this parameter is set to a has no impact on the smaller value, congestion may occur in Versions earlier than equipment. macro cells. BSC6900 V900R011
Radio
BSC6900
GBFD110601 GBFD510501
0~255
None
15 Cell
This parameter is valid only when "QCKMVHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
Radio
QCKTRUEC NT
BSC6900
GBFD110601 GBFD510501
1~10
None None
2 Cell
This parameter is valid only when "QCKMVHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "QCKSTATCNT" >= "QCKTRUECNT".
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in macro cells. If this parameter is set to a smaller value, The parameter modification unnecessary handovers between micro has no impact on the cells are performed, thus affecting the Versions earlier than equipment. voice quality. BSC6900 V900R011
Radio
QI
Qsearch I
BSC6900
GBFD114301 GBFD114302
0~15
None None
None
Cell
None
Not involved
Not involved
None
Radio
QLENSD
BSC6900
GBFD110601 GBFD510501
ms
None
6 Cell
None
Not involved
Not involved
None
Radio
QLENSI
BSC6900
GBFD110601 GBFD510501
ms
None
2 Cell
None
Not involved
Not involved
None
Radio
QOSOPT
BSC6900
GBFD119902
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page227of316
150682621.xls.ms_office
Security Level:
QP
Qsearch P
BSC6900
QSEARCHC
Qsearch C
BSC6900
QTRUCHAN MANGSWIT CH
BSC6900
Threshold of the signal level for cell reselection in packet transfer mode. In packet transfer mode, if the signal level in the serving cell is below [0, 7] or above [8, 15], the MS starts to search for 3G cells. For example, if this parameter is set to 5 and the signal level of the serving cell is lower than 5, the MS starts to search for 3G cells. If this SET parameter is GCELLCCUTRA set to 10 and NSYS(Optional) the signal In connection mode, if the signal level is below (0-7) or above (815), the MS SET starts to GCELLCCUTRA search for NSYS(Optional) 3G cells. This parameter is used to avoid allocating the calls whose signal strengths differ greatly to the same timeslot. The BSC measures the signal merge conditions on each timeslot every 0.5 seconds. If the difference between the highest signal strength and the lowest signal strength on a timeslot is greater than the value of "UL Signal Strength Difference SET Threshold", it GCELLSOFT(O regards it as ptional) a signal
GBFD114301 GBFD114302
0~15
None None
15 Cell
None
Not involved
Not involved
None
Radio
GBFD114301 GBFD114302
0~15
None None
15 Cell
None
Not involved
Not involved
None
Radio
GBFD110601 GBFD510501
Enumeration Type
NO(Close), YES(Open)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
The P/N criteria is used to determine low downlink power for multi-density carriers. If the downlink power of a multi-density carrier remains low during a consecutive P seconds out of N seconds, the downlink power of the multi-density carrier is considered low. This parameter corresponds GBFDto the P in 110601 the P/N GBFDcriteria. 510501 The P/N criteria is used to determine low downlink power for multi-density carriers. If the downlink power of a multi-density carrier remains low during a consecutive P seconds out of N seconds, the downlink power of the multi-density carrier is considered low. This parameter corresponds GBFDto the N in 110601 the P/N GBFDcriteria. 510501 Whether to use the statistical multiplexing algorithm for multi-density power
1~16
None
3 Cell
This parameter is valid only when "QTRUPWRSHARE" is not set to NONE. The following condition must be met: "QTRUDNPWRSTATTIM E" >= "QTRUDNPWRLASTTIM Read & E". Write
Not involved
Not involved
None
If this parameter is set to a greater value, downlink power insufficiency may not be solved in time, thus leading to call drops. If this parameter is set to a smaller value, The parameter modification unnecessary handovers may be has no impact on the performed, thus the voice quality is Versions earlier than equipment. decreased. BSC6900 V900R011
Radio
BSC6900
1~16
None
5 Cell
This parameter is valid only when "QTRUPWRSHARE" is not set to NONE. The following condition must be met: "QTRUDNPWRSTATTIM E" >= "QTRUDNPWRLASTTIM Read & E". Write
Not involved
Not involved
None
If this parameter is set to a greater value, unnecessary handovers may be performed, thus the voice quality is decreased. The parameter modification If this parameter is set to a smaller value, has no impact on the downlink power insufficiency may not be Versions earlier than equipment. solved in time, thus leading to call drops. BSC6900 V900R011
Radio
BSC6900
GBFD111005
Enumeration Type
NONE, DYNAMIC
None None
NONE
Cell
None
Not involved
Not involved
None
Radio
QUALOFFTI MES
Maximum number of times that the BTS finds that the air conditioner needs to be switched off. If the number of times that the BTS finds that the air conditioner needs to be switched off in the "CHKOFFTI MES" checks reaches this parameter, the BTS SET switches off BTSAIRCON(Op the air GBFDtional) conditioner. 111202 Maximum number of times that the BTS finds that the air conditioner needs to be switched on. If the number of times that the BTS finds that the air conditioner needs to be switched on in the "CHKONTIM ES" checks reaches this parameter, the BTS SET switches on BTSAIRCON(Op the air GBFDtional) conditioner. 111202 Step of downward power adjustment according to SET the quality of GCELLPWR2(O the received GBFDptional) signals. 110703 Whether to query the classmark of the call in an incoming BSC handover Whether to allow the fast handover algorithm
O&M of BTS
3~20
None None
6 BTS
This parameter must be equal to or greater than 0.6x"CHKOFFTIMES" and equal to or less than Read & "CHKOFFTIMES". Write
Not involved
Not involved
This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
O&M of BTS
3~20
None None
6 BTS
This parameter must be equal to or greater than 0.6x"CHKONTIMES" and equal to or less than Read & "CHKONTIMES". Write
Not involved
Not involved
This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
QUALSTEP
0~4
dB
None
2 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, the algorithm cannot realize fast power control. If this parameter is set to a greater value, the power control may be The parameter modification performed excessively, thus leading to has no impact on the poor quality, low level, and ping-pong Versions earlier than equipment. power control. BSC6900 V900R011
Radio
BSC6900
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
BSC6900
GBFD510102
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page228of316
150682621.xls.ms_office
Security Level:
R0AuxDev
Auxiliary devices of rack 0. This parameter contains eight bits. The eight bits, from the most significant bit to the least significant bit, indicate whether to install a voltage stabilizer, internal battery, transmission power supply, temperature control unit, auxiliary device 5, auxiliary device 6, auxiliary device 7, and auxiliary device 8. When a bit is GBFDset to 1, the 111202
O&M of BTS
None None
None
BTS
None
Not involved
Not involved
This paramete r is supporte d only by the The parameter modification BTS3012 has no impact on the A. equipment. None This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
R0BatAllow
GBFD111202
O&M of BTS
Enumeration Type
NO(No), YES(Yes) INSIDE_100AH(1 00AH Inside Storage Battery), INSIDE_50AH(50 AH Inside Storage Battery), OUTSIDE_300A H(300AH Outside Storage Battery), OUTSIDE_400A H(400AH Outside Storage Battery), OUTSIDE_500A H(500AH Outside Storage Battery), OUTSIDE_650A H(650AH Outside Storage Battery), OUTSIDE_200A H(200AH Outside Storage Battery)
NO, YES
None None
None
BTS
None
Not involved
Not involved
Equipme nt
R0BatCap
Capacity of the battery SET rack BTSBAT(Mandat configured ory) for rack 0
GBFD111202
O&M of BTS
Enumeration Type
None None
None
BTS
Not involved
Not involved
This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
R0BatCoeff
Ratio of the maximum charging current of the battery pack configured for rack 0 to the capacity of the battery pack. For example, assume that the battery pack has a capacity of 200 AH. If this parameter is set to 0.15C, the maximum charging current of the SET battery pack BTSBAT(Mandat is 30 A (= GBFDory) 0.15 x 200). 111202
O&M of BTS
Enumeration Type
None None
015C
BTS
Not involved
Not involved
This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
R0BatType
R1AuxDev
Type of the SET battery rack BTSBAT(Mandat configured ory) for rack 0 Auxiliary devices of rack 1. This parameter contains eight bits. The eight bits, from the most significant bit to the least significant bit, indicate whether to install a voltage stabilizer, internal battery, transmission power supply, temperature control unit, auxiliary device 5, auxiliary device 6, auxiliary device 7, and auxiliary SET device 8. BTSAUXEQP(O When a bit is ptional) set to 1, the
GBFD111202
O&M of BTS
Enumeration Type
INSIDE_BATTER Y(Inside Storage Battery), OUTSIDE_BATT INSIDE_BATTERY, ERY(Outside OUTSIDE_BATTER Storage Battery) Y
None None
None
BTS
Not involved
Not involved
Equipme nt
GBFD111202
O&M of BTS
None None
None
BTS
None
Not involved
Not involved
This paramete r is supporte d only by the The parameter modification BTS3012 has no impact on the A. equipment. None This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
R1BatAllow
GBFD111202
O&M of BTS
Enumeration Type
NO(No), YES(Yes) INSIDE_100AH(1 00AH Inside Storage Battery), INSIDE_50AH(50 AH Inside Storage Battery), OUTSIDE_300A H(300AH Outside Storage Battery), OUTSIDE_400A H(400AH Outside Storage Battery), OUTSIDE_500A H(500AH Outside Storage Battery), OUTSIDE_650A H(650AH Outside Storage Battery), OUTSIDE_200A H(200AH Outside Storage Battery)
NO, YES
None None
None
BTS
None
Not involved
Not involved
Equipme nt
R1BatCap
Capacity of the battery SET rack BTSBAT(Mandat configured ory) for rack 1
GBFD111202
O&M of BTS
Enumeration Type
None None
None
BTS
Not involved
Not involved
This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
R1BatCoeff
Ratio of the maximum charging current of the battery pack configured for rack 1 to the capacity of the battery pack. For example, assume that the battery pack has a capacity of 200 AH. If this parameter is set to 0.15C, the maximum charging current of the SET battery pack BTSBAT(Mandat is 30 A (= GBFDory) 0.15 x 200). 111202
O&M of BTS
Enumeration Type
None None
None
BTS
Not involved
Not involved
This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
R1BatType
Type of the SET battery rack BTSBAT(Mandat configured ory) for rack 1
GBFD111202
O&M of BTS
Enumeration Type
INSIDE_BATTER Y(Inside Storage Battery), OUTSIDE_BATT INSIDE_BATTERY, ERY(Outside OUTSIDE_BATTER Storage Battery) Y
None None
None
BTS
Not involved
Not involved
Equipme nt
6/9/2013
Page229of316
150682621.xls.ms_office
Security Level:
R2AuxDev
Auxiliary devices of rack 2. This parameter contains eight bits. The eight bits, from the most significant bit to the least significant bit, indicate whether to install a voltage stabilizer, internal battery, transmission power supply, temperature control unit, auxiliary device 5, auxiliary device 6, auxiliary device 7, and auxiliary device 8. When a bit is GBFDset to 1, the 111202
O&M of BTS
None None
None
BTS
None
Not involved
Not involved
This paramete r is supporte d only by the The parameter modification BTS3012 has no impact on the A. equipment. None This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
R2BatAllow
GBFD111202
O&M of BTS
Enumeration Type
NO(No), YES(Yes) INSIDE_100AH(1 00AH Inside Storage Battery), INSIDE_50AH(50 AH Inside Storage Battery), OUTSIDE_300A H(300AH Outside Storage Battery), OUTSIDE_400A H(400AH Outside Storage Battery), OUTSIDE_500A H(500AH Outside Storage Battery), OUTSIDE_650A H(650AH Outside Storage Battery), OUTSIDE_200A H(200AH Outside Storage Battery)
NO, YES
None None
None
BTS
None
Not involved
Not involved
Equipme nt
R2BatCap
Capacity of the battery SET rack BTSBAT(Mandat configured ory) for rack 2
GBFD111202
O&M of BTS
Enumeration Type
None None
None
BTS
Not involved
Not involved
This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
R2BatCoeff
Ratio of the maximum charging current of the battery pack configured for rack 2 to the capacity of the battery pack. For example, assume that the battery pack has a capacity of 200 AH. If this parameter is set to 0.15C, the maximum charging current of the SET battery pack BTSBAT(Mandat is 30 A (= GBFDory) 0.15 x 200). 111202
O&M of BTS
Enumeration Type
None None
None
BTS
Not involved
Not involved
This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
R2BatType
Type of the SET battery rack BTSBAT(Mandat configured ory) for rack 2
GBFD111202
O&M of BTS
Enumeration Type
INSIDE_BATTER Y(Inside Storage Battery), OUTSIDE_BATT INSIDE_BATTERY, ERY(Outside OUTSIDE_BATTER Storage Battery) Y
None None
None
BTS
Not involved
Not involved
Equipme nt
RA
RAC
BSC6900
The NS performs location management based on routing areas during GPRS packet services. Each routing area has a routing area identifier, which is broadcast as a system MRFDmessage. 210301
Configuration Management
0~255
None None
0 Cell
None
Not involved
Not involved
None
Radio
RA
route area
BSC6900
RA
Routing Area
BSC6900
The NS performs location management based on routing areas during GPRS packet services. Each routing ADD area has a GEXT3GCELL( routing area MRFDOptional) identifier. 210301 Identifies the SET routing area GCELLGPRS(O of the current GBFDptional) cell. 114101 ADD GCELLQUICKS ETUP(Optional) SET Route area GBFDBTSAUTOPLAN of the current 510701 CFG(Optional) cell SET Route area BTSAUTOPLAN of the current GBFDCFG(Optional) cell 510702
Configuration Management
0~255
None
0 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
0~255
None None
None
Cell
This parameter is valid only when "GPRS" is set Read & to SupportAsInnPcu. Write
Cell
None
Radio
RA
Route area
BSC6900
0~255
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
RA1
Route area
BSC6900
0~255
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
BSC6900
Minimum access level of the random access channel SET (RACH) in GCELLCCACCE the CS GBFDSS(Optional) domain 111003 Level threshold of the MS random access in the PS domain. For the BTS3X and the doubletransceiver BTSs, this parameter settings affect the MS access. If the receive level of the RACH burst is lower than RACH Min.Access Level, the BTS regards this access as an invalid one and no decoding is performed. If the receive level of the RACH burst is higher than SET RACH Min. GCELLRACHCC Access GBFDLEV(Optional) Level, the 111003
-121~-109
dBm None
-115 Cell
The value of this parameter must be smaller than "RACH Busy Threshold" in the "SET GCELLCCBASIC" Read & command. Write
Not involved
Not involved
This paramete r should be set on the basis of the actual receiver sensitivity of the BTS and the minimum access level of the MS to avoid the situation where a call cannot be made even though If this parameter is set to a greater value, there are The parameter modification the call drop rate decreases but the traffic signals has no impact on the volume and paging success rate are Versions earlier than detected. equipment. affected. BSC6900 V900R011
Radio
-121~-47
dBm None
-109 Cell
The value of this parameter must be smaller than "RACH Busy Threshold" in the "SET GCELLCCBASIC" Read & command. Write
Not involved
Not involved
This paramete r should be set on the basis of the actual receiver sensitivity of the BTS and the minimum access level of the MS to avoid the situation where a call cannot be made even though there are The parameter modification signals has no impact on the detected. equipment.
If this parameter is set to a greater value, the call drop rate decreases but the traffic volume and paging success rate are Versions earlier than affected. BSC6900 V900R011
Radio
6/9/2013
Page230of316
150682621.xls.ms_office
Security Level:
BSC6900
Level threshold of the MS random access for the BTS to determine the RACH busy state. When the receive level of the random access burst timeslot is greater than this threshold, the BTS considers that the timeslot is GBFDbusy. 111003 Number of RACH burst timeslots in a RACH load measurement . The value of this parameter indicates the interval during which the BSC determines whether an RACH timeslot is busy. For details, see GSM Rec. GBFD08.58. 111003 Minimum voltage level for accessing CS services of the location group Routing area color code of the GPRS cell. Whether to allow the MS to access another cell. Correlation threshold of the training sequence for the random access. As defined in the GSM recommenda tion, the system can determine whether the received signals are random access signals of the MS and calculate the TA value by checking the correlation of the 41-bit training sequence. Random Access Error Threshold Number of Correct Bits in the 41-Bit Training Sequence Hysteresis of cell selection in different routing area. When a standby or ready MS starts cell reselection, if the original cell and the target cell are in the different routing area, the signal level of the neighboring cell must be greater that of the current cell. Their difference must be larger than the specified hysteresis. Otherwise the MS cannot start cell reselection. The larger the
0~63
dB
None
None
Cell
None
Not involved
Not involved
For the BTS3X series and doubletransceiv er BTSs, this paramete r does not affect MS access but affects the reporting of CCCH_L OAD_IN D. If the level received by the BCCH on the network side is greater than the RACH Busy The parameter modification If this parameter is set to a smaller value, Threshol has no impact on the the random access success rate may Versions earlier than d, the equipment. decrease. BSC6900 V900R011
Radio
BSC6900
0~65535
None None
None
Cell
None
Not involved
Not involved
None
If this parameter is set to a smaller value, the BTS frequently sends the overload messages to the BSC. Thus, the system resource usage decreases and MSs are difficult to access the network. If this parameter is set to a greater value, The parameter modification the BTS sends an overload message to has no impact on the the BSC at a long interval. Thus, system Versions earlier than equipment. faults may occur. BSC6900 V900R011
Radio
BSC6900
ADD BTSLOCGRP(O ptional) SET GCELLPSBASE( Optional) SET GCELLRESELE CTPARA(Option al)
GBFD510104
Multi-site Cell
-121~-47
dBm None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
RACOLOR
GBFD114101
GPRS
0~7
None None
1 Cell
None
Not involved
Not involved
None
Radio
RANDACCE SSRETRY
BSC6900
GBFD114101
GPRS
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
RANERRTH RED
BSC6900
GBFD111003
0~255
None None
225 Cell
None
Not involved
Not involved
None
If this parameter is set to a smaller value, the allowable error rate for the random access signal is high and an MS can easily access the network; however, the error report rate is high. If this parameter The parameter modification is set to a greater value, the error report has no impact on the rate of the MS is low but the MS cannot Versions earlier than equipment. easily access the network. BSC6900 V900R011
Radio
BSC6900
GBFD114101
GPRS
Enumeration Type
0dB(0dB), 2dB(2dB), 4dB(4dB), 6dB(6dB), 8dB(8dB), 10dB(10dB), 12dB(12dB), 14dB(14dB), nouse(no use)
None
2dB
Cell
None
Not involved
Not involved
None
Radio
RATE
BSC6900
RATE
Rate
BSC6900
Fault cell rate when restore interface SET board to FACFG(Mandato judge fault MRFDry) port. 210304 Port rate of SET the IP BTSETHPORT( interface GBFDOptional) board 118601
Faulty Management
0~100
None None
None
None
None
Not involved
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
Abis over IP
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
BSC6900
Switch for controlling the AMR rate. Value 0 indicates that C/I is used to control the AMR rate. Value 1 indicates that SET BER is used GCELLCCAMR( to control the GBFDOptional) AMR rate. 115506 This parameter specifies whether the RATSCCH function is enabled during the SET call GCELLCCAMR( establishmen GBFDOptional) t procedure. 115506 Original measurement report sampling rate (for each call, one out of four measurement reports is GBFDcollected) 110801
None
Cell
None
Not involved
Not involved
None If this paramete r is set to Algorithm I, the BTS performs AMR rate adaptatio n accordin g to the C/I value. If this paramete r is set to Algorithm II, the BTS performs AMR rate adaptatio n accordin g to the BER value. Algorithm II is valid only for The parameter modification the EMR. has no impact on the If this equipment. None
Radio
Radio
BSC6900
None DISABLE
DISABLE
Cell
None
Not involved
Not involved
None
The parameter modification When this parameter is set to on, the has no impact on the MOS of a MS-initiated and MSequipment. terminated call is improved.
BSC6900 V900R011
Radio
RAWMRSA MPLE
BSC6900
1~255
None None
BSC69 4 00 None
Not involved
Not involved
None
Radio
6/9/2013
Page231of316
150682621.xls.ms_office
Security Level:
RBPTYPE
BSC6900
RCDT
BSC6900
RCN
Chain No.
BSC6900
LASTRBP indicates the last rollback point. The system automatically takes the position where the current configuration command is executed as the rollback point, and the user does not need to specify a rollback point. APPOINTRB P indicates the rollback point specified by the user. Type of recording the execution result 1. REC_ALL: indicating that the execution results of all the commands are recorded no matter whether the commands are executed successfully. 2. REC_ERR: indicating that only the execution results of failed commands are recorded. 3. REC_NON: indicating that the execution results of all the Number of the RXU chain or ring. The value scope is 0~11 for NonSRAN BTS and 0~249 for SRAN BTS. The RXU chain No. is unique in the same BTS. A maximum of 12 RXU chains can be configured in one BTS. The first RXU
MRFD210301
Configuration Management
Enumeration Type
LASTRBP, APPOINTRBP
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
GBFD111203
O&M of BSC
Enumeration Type
None None
REC_ALL
RNC
None
Not involved
Not involved
None
Equipme nt
GBFD111202
O&M of BTS
0~249
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
RCN1
BSC6900
chain number when combining two RXU CBN chains to be BTSRXUCHAIN( one RXU GBFDMandatory) ring. The second 111202 RXU chain number when combining two RXU CBN chains to be BTSRXUCHAIN( one RXU GBFDMandatory) ring. 111202
O&M of BTS
0~249
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
RCN2
O&M of BTS
RCVMD
Receive Mode
BSC6900
MRFD210301
Configuration Management
Interval Type 0~249 INDEPENDENT(I ndependent Receiver), DIVIDING(Dividin g Receiver), FOURDIVERSIT Y(Four Diversity Receiver), MAINDIVERSIT Y(Main Enumeration Diversity), Type NONE(None)
0~249
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
None None
None
TRX
None
Not involved
Not involved
None
Radio
RDC
BSC6900
Speed reduction efficient of the logical port. When detecting link congestion through IPPM, the system reduces the bandwidth rate of the logical port by using the value of the bandwidth ADD multiplied by IPLOGICPORT( this Optional) parameter. None
None
0~100
None
96
IP logical 96 port
None
Not involved
Not involved
None
Transpor t
REASSEN
Allow Reassign
BSC6900
TCH Reassignment
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
REASSFRE QBAND
Whether to re-assign the radio channels on a different band or on the same band. This can help minimize the decrease in service quality due to interference, faulty TRX paths, or faulty project constructions GBFD. 112501 IUO cell receive quality threshold (AMRFR), which is used GBFDfor IUO 113201 handover GBFDdecision 115501 IUO cell receive quality threshold (AMRHR), which is used GBFDfor IUO 113201 handover GBFDdecision 115502 One of the parameters that decide the underlay and overlay areas. The underlay and overlay areas are determined by "RX_QUAL Threshold", "RX_LEV Threshold", "RX_LEV Hysteresis", "TA Threshold", and "TA Hysteresis" GBFDtogether. 113201
TCH Reassignment
Enumeration Type
None None
None
Cell
This parameter is valid when "REASSEN" in the "SET GCELLCCBASIC" command is set to YES.
Not involved
Not involved
None To improve the success rate of reassign ment, it is recomme nded that you use the default value Different Band. That is, the frequenc y band of the preferenti ally reassign ed channel is different from what is used in the The parameter modification original has no impact on the assignme equipment. None
If this parameter is set to YES, the BSC initiates a reassignment when receiving an assignment failure message over the Um interface. This helps increase the call completion rate and improve the QoS of the network. The successful The parameter modification reassignment, however, results in an has no impact on the increase in the access delay of MSs and Versions earlier than equipment. the load of the BSC. BSC6900 V900R011
Radio
Radio
0~70
None None
50 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
Radio
0~70
None None
40 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
Radio
BSC6900
0~63
dB
None
5 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell and "ENIUO" is set to OFF.
Not involved
Not involved
None
Radio
6/9/2013
Page232of316
150682621.xls.ms_office
Security Level:
One of the parameters that decide the underlay and overlay areas. The underlay and overlay areas are determined by "RX_QUAL Threshold", "RX_LEV Threshold", "RX_LEV Hysteresis", "TA Threshold", and "TA Hysteresis" GBFDtogether. 113201 Whether to
0~63
dB
None
30 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell and "ENIUO" is set to OFF.
Not involved
Not involved
None
Radio
RECLEVUO HOALLOW
BSC6900
BSC6900
use the downlink receive level as a condition in SET IUO GCELLHOIUO( handover Optional) decision With traffic control enabled, the BSC discards some paging messages. This parameter specifies whether to record detailed information of paging messages discarded by the BSC in SET the OTHSOFTPARA commissionin (Optional) g logs. Speed reduction ADD alarm IPLOGICPORT( recovery Optional) threshold One of the parameters that decide the underlay and overlay areas. If "En Iuo Out Cell Allowed" is set to OFF, the underlay and overlay areas are determined by "RX_QUAL Threshold", "RX_LEV Threshold", "RX_LEV Hysteresis", "TA Threshold", and "TA Hysteresis" together; if "En Iuo Out Cell Enable" is set to ON, the underlay and overlay SET areas are GCELLHOIUO( determined Optional) by Whether to use the downlink receive quality as a condition in SET IUO GCELLHOIUO( handover Optional) decision Whether to back up the ADD data of the BRD(Mandatory) board
GBFD113201
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
Radio
GBFD111705
Enumeration Type
NO, YES
NO, YES
None None
NO
BSC69 00 None
Not involved
Not involved
None
Equipme nt
RECOVERT HD
BSC6900
None
None
20~99
None
30
IP logical 30 port
None
Not involved
Not involved
None
Transpor t
BSC6900
GBFD113201
0~70
None None
60 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
Radio
GBFD113201
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
RED
Backup
BSC6900
MRFD210301
Configuration Management
Enumeration Type
YES(YES), NO(NO)
YES, NO
None None
None
Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
Interval for releasing the secondary SET links in the BSCPSSOFTPA congestion GBFDRA(Optional) state. 111705 Secondary link bandwidth that is released each time in SET the BSCPSSOFTPA congestion RA(Optional) state. SET CLK(Optional) SET CLK(Optional) SET CLK(Optional) SET CLK(Optional) SET CLK(Optional) SET CLK(Optional) SET CLK(Optional) Port for output LINE2 Back-up port for output LINE2 Port for output LINE1 Back-up port for output LINE1 Switch of panel BITS1(2M) Switch of panel BITS2(2M) Whether to use SGSN clock source
0~50
ms
None
10 BSC
None
Not involved
Not involved
None
Radio
Number of Transmission Bandwidth to ReduceTrans Reduce when BwNum Congested REF2MCLK2 SRC Port for LINE2 REF2MCLK2 Back-up port for SRCBAK LINE2 REF2MCLKS RC Port for LINE1 REF2MCLKS Back-up port for RCBAK LINE1
BSC6900
GSM Flow Control BSC/RNC Clock BSC/RNC Clock BSC/RNC Clock BSC/RNC Clock BSC/RNC Clock BSC/RNC Clock BSC/RNC Clock
0~768
None None
3 BSC
None
Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write
Not involved
Not involved
None
BSC6900
0~31
None None
None
Board
None
Not involved
Not involved
None
BSC6900
0~31
None None
None
Board
None
Not involved
Not involved
None
BSC6900
0~31
None None
None
Board
None
Not involved
Not involved
None
BSC6900
Interval Type 0~31 Enumeration Type Enumeration Type Enumeration Type OFF(OFF), ON(ON) OFF(OFF), ON(ON) NO(NO), YES(YES)
0~31
None None
None
Board
None
Not involved
Not involved
None
REF2MCLKS Switch of panel 2M W1 BITS1 BSC6900 REF2MCLKS Switch of panel 2M W2 BITS2 BSC6900 REFUSELOC Use SGSN clock ALCLK source
OFF, ON
None None
None
Board
None
Not involved
Not involved
None
OFF, ON
None None
None
Board
None
Not involved
Not involved
None
BSC6900
NO, YES
None NO
NO
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
None
None
None
None
None
None
None
REGION
REHOSTAB STIME
BSC6900
Region information of the IP BTS SET configured BTSLSW(Option with local GBFDal) switching 117702 SET GREDGRPPRIM HOSTPOLICY( Absolute time GBFDMandatory) of re-homing 113725 SET GREDGRPPRIM HOSTPOLICY( Delay time of GBFDMandatory) re-homing 113725
0~94
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
Compound Type
00:00:00~23:59:59
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
1~3600
600 None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
REHOSTTY PE
ReHost Type
BSC6900
REINITTBL
BSC6900
BSC6900
SET GREDGRPPRIM HOSTPOLICY( Policy type of Mandatory) re-homing Whether to re-initialize the neighboring cell pair for ADD software AISSCFG(Mand synchronizati atory) on. Cabinet number of the associated module. The associated two MRFUs or GRFUs SET must be in BTSRXUBP(Man the same datory) cell.
GBFD113725
Enumeration Type
REHOSTRIGHT NOW(ReHostRig htNow), REHOSTDELAY( ReHostDelay), REHOSTRIGHTNO REHOSTWHEN( W, REHOSTDELAY, REHOSTDEL ReHostWhen) REHOSTWHEN None AY REHOSTDELAY
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
GBFD118201
SoftSynchronized Network
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
GBFD111202
O&M of BTS
0~62
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
Whether to enable the configuration of the "Extend Connection" attribute. The "Extend Connection" attribute describes the cascading relationship of the DFCB, which helps the DFCU SET perform the BTSDFCUBP(Op six-in-one GBFDtional) function. 111202
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
RELATEDM ODFUNC
BSC6900
BSC6900
Function to be performed SET by two BTSRXUBP(Opti associated GBFDonal) modules 111202 Slot number SET of the BTSRXUBP(Man associated GBFDdatory) module 111202
O&M of BTS
Enumeration Type
OFF(OFF), POWERSHARIN G(Power Sharing Between Boards), RF_FH(RF Frequency OFF, Hopping POWERSHARING, Between Boards) RF_FH
None None
OFF
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Equipme nt
O&M of BTS
0~23
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page233of316
150682621.xls.ms_office
Security Level:
BSC6900
GBFD111202
O&M of BTS
0~255
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
Tributary Number of the DFCB that is cascaded to the DFCU. The "Extend Connection" attribute describes the cascading relationship of the DFCB, which helps the DFCU SET perform the BTSDFCUBP(Op six-in-one GBFDtional) function. 111202 ADD TRMMAP(Option al) ADD TRMFACTOR(M andatory) Remark
O&M of BTS
Enumeration Type
A, B, NONE
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
REMARK
Remark
BSC6900
None
None
String Type
None
1~31 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
REMARK
BSC6900
Purpose ADD description of IPRT(Mandatory the route ) record None Remote NSVL ID of the Gb IP route.
None
String Type
None
1~250 characters
None None
None
IP route
None
Not involved
Not involved
None
Transpor t
BSC6900
GBFD118603
Gb over IP
0~1023
None None
None
NSE
None
Not involved
Not involved
Not involved
None
Equipme nt
REP
Repeat
BSC6900
A key parameter that indicates how many times the BSC broadcasts cell messages. You can obtain the cell broadcast times by running the "DSP GSMSCB" command. The value 0 indicates no GBFDrepeat. 113602 Whether to enable the Repeated Downlink FACCH function for the cell If the cell supports the Repeated Downlink FACCH function and the measured downlink quality is lower than the downlink quality threshold, the BTS enables the repeated transmission of FACCH frames. Whether to enable the Repeated SACCH function for the cell
0~65535
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD113721
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD113721
0~7
None None
None
Cell
Not involved
Not involved
None
Radio
BSC6900
GBFD113721
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
REPORT
BSC6900
RESALMID
LOD BTSSW(Optional ) LOD BTSPATCH(Opti onal) CON Whether to BTSPATCH(Opti report the GBFDonal) progress 111202 Whether to reserve the binding of the SET alarm ID and BTSENVALMPO the alarm MRFDRT(Optional) port 210304 CPU usage threshold for resource auditing control. When the average CPU usage of sliding windows reaches or exceeds the threshold, resource auditing control is triggered. This parameter is valid only SET when "Board FCCPUTHD(Opti Class" is WRFDonal) "XPU". 040100 Packet queue usage threshold for resource auditing control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, resource auditing control is triggered. This parameter is valid only when "Board Class" is "XPU". CPU usage threshold for recovery from resource auditing control. When the average CPU usage of sliding windows is lower than the threshold, resource auditing control is stopped. This parameter is valid only when "Board Class" is "XPU". Packet queue usage threshold for recovery from resource auditing control. When the average packet queue usage of sliding windows is lower than the threshold, resource auditing control is stopped. This parameter is valid only when "Board Class" is "XPU". Whether to control the resource auditing flow
O&M of BTS
Enumeration Type
None REPORT
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
Faulty Management
Enumeration Type
NO(No), YES(Yes)
NO, YES
None YES
YES
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Flow Control
30~100
per cent
None
60 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
75 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
50 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
65 Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
SET FCSW(Optional)
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page234of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
Whether to perform resource checks on the resource usage system and resource management system. Resource checks can prevent resource hanging in case of anomalies. Resource checks cover channel resources, transmit SET resources, OTHSOFTPARA and BSC GBFD(Optional) resources. 111203 During cell reselection, the level of the target cell must be greater than "cell reselection level threshold " + "cell reselection hysteresis". Hysteresis must be adjusted according to the reselection performance statistic result and the actual network status. The flexible setting of this parameter can provide effective guidance for SET reselection GCELLNC2PAR between two GBFDA(Optional) neighboring 116201 NC2 cell SET reselection GCELLNC2PAR interval in the GBFDA(Optional) same cell. 116201 Number of receiving level of the servicing cell before judgment is performed SET according to GCELLNC2PAR P/N GBFDA(Optional) regulation. 116201 The times of servicing cell receiving level lower than the cell reselection level threshold in SET the normal GCELLNC2PAR reselection GBFDA(Optional) period. 116201 This parameter specifies the default preconverted PDCHs in the dynamic transferable GBFDchannel pool. 113101
O&M of BSC
Enumeration Type
NO, YES
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Equipme nt
0~63
None None
6 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
RESELINTE RVAL
BSC6900
1~10
None
2 Cell
None
Not involved
Not involved
None
Radio
RESELWAT CHPERIOD
1~32
None None
10 Cell
None
Not involved
Not involved
None
Radio
BSC6900
1~32
None None
1 Cell
None
Not involved
Not involved
None
Radio
0~8
None None
0 Cell
None
Cell
None
BSC6900 V900R011
Radio
BSC6900
Number of idle channels reserved in a cell. When the number of idle channels in a cell is smaller than the threshold, the BSC enables SET the power GCELLOTHEXT( amplifier on a GBFDOptional) TRX. 111602 Whether to withhold link breakdown alarms in case of BTS resets due to SET data OTHSOFTPARA configuration GBFD(Optional) s If OML links 111202 break down after BTS resets caused by data configuration s and recover within the period specified by this parameter, configuration reset alarms are reported; If OML links fail to recover within the period specified by this parameter, OML link SET breakdown OTHSOFTPARA alarms are GBFD(Optional) reported. 111202 Interval for resetting the counter when the user fails MRFDto log times in 210305 Retry after the peer response timer expires during NSVC GBFDreset. 114101 Duration of the peer response timer during NSVC reset.
0~16
None None
None
Cell
This parameter is valid when "DYNOpenTrxPower" in the "SET GCELLBASICPARA" command is set to YES.
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
Enumeration Type
NO, YES
NO, YES
None None
NO
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
0~65535
min
None
Not involved
Not involved
None
Equipme nt
RESETINTE RVAL
BSC6900
Security Management
1~60
min
None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
GPRS
1~255
None None
3 BSC
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD114101
GPRS
RESID
Reason
BSC6900
RespReqSel
BSC6900
Reason for TST activating the SNDRSI(Mandat radio status GBFDory) procedure. 119001 Whether the HO RQD messages sent by the BSC to an MSC carry response request cells. Response request cells are optional. They are used to inform the MSC whether it needs to return HO REJECT messages when HO RQD SET messages OTHSOFTPARA fail to trigger GBFD(Optional) handovers. 111804 DLD LICENSE(Option al) Whether to ULD resume LICENSE(Option broken al) download
Gb Interface Function
Interval Type 1~120 1~120 MSLOST(RADIO _STS_MS_LOST ), QUALITYBAD(R ADIO_STS_QUA LITY_BAD), CELLRESELECT (RADIO_STS_C MSLOST, Enumeration ELL_RESELECT QUALITYBAD, Type ) CELLRESELECT
None
10 BSC
None
Not involved
Not involved
None
Equipme nt
None None
None
BSC
None
Not involved
Not involved
Not involved
None
Equipme nt
Enumeration Type
NO, YES
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
The setting of this paramete r requires negotiati on with the MSC, so that the MSC can correctly process HO RQD The parameter modification message has no impact on the s. equipment. None
Radio
REST
Rest Flag
BSC6900
GBFD111203 MRFD210403
Enumeration Type
None NO
None
RNC
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page235of316
150682621.xls.ms_office
Security Level:
RESTARTT MR
BSC6900
GBFD118611 GBFD118622
2~5
PPP 3 link
None
BSC6900
Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None Negotiati on can succeed only when the configura tion is consisten t on the local and The parameter modification peer has no impact on the ends. equipment. None
Transpor t
RESTARTT MR
BSC6900
Duration of ADD the PPP/MP MPLNK(Optional link restart ) timer EXP ALMLOG(Option al) STA Restoration ALMLOG(Option type of the al) alarm Time for the BSC to initiate the common measurement or information exchange procedure ADD after this GNRNC(Optional procedure ) fails When assign channels, the BSC ensures that the sum of the number of channels occupied by high-priority users and the number of idle channels reserved for high-priority users is no smaller than this parameter. Every time the BSC assigns channels to a user whose priority is lower than "Highest Priority", it checks whether the sum of the number of SET channels GCELLCHMGBA occupied by SIC(Optional) users of
GBFD118611 GBFD118622
Interval Type 2~5 Noneed, Manually, Reset, Normally, Correlative, Configuration, Expired
3 MP link None
Not involved
Not involved
Transpor t
restype
BSC6900
MRFD210304
Faulty Management
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
MRFD211402
{0~86400}
30
30 BSC
Set when Allow Common Measurement at Iur-g is set to Yes or Allow Info Exchange at Iur-g is set Read & to Yes Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
GBFD116001
Resource Reservation
0~190
None None
0 Cell
None
Not involved
Not involved
The range of this paramete r is determin ed by the cell configura tion. The lower limit is 0, and the upper limit is sum of TCHF, TCHH and Dynamic PDCH configure The parameter modification d in the has no impact on the cell. equipment.
If this parameter is set to a greater value, too many channels may be reserved for the users with high priority, and the users with low priority may be failed to access channels. If this parameter is set to a smaller value, channels reserved for the users with high priority may be Versions earlier than insufficient. BSC6900 V900R011
Radio
BSC6900
Maximum number of levels that the BTS RF power decreases. This parameter is used to control the decrease in the BTS RF power. If the value is too large, the BTS power decreases too much. If the value is too small, the BTS power decreases less and the power SET decrease GCELLOTHEXT( effect is not MRFDOptional) good. 210301 Interval for sending the radio resource indication messages. The TRX reports the interference level for each of the channels that have been idle for the whole measurement period. This parameter is used by a BTS to inform the BSC of the interference levels on idle channels of a TRX. For details, see GSM Rec. 08.58 and GBFD08.08. 111004 Interval for executing the scheduled subtask The unit is determined according to the time mode. 1. If the time mode is set to "DAILY_T" or "DAILY_C", the unit is day. 2. If the time mode is set to "WEEKLY_T " or "WEEKLY_C ", the unit is week. 3. If the time mode is set to "MONTHLY_ T" or "MONTHLY_ C", the unit is GBFDmonth. 111203 Whether to enable the BTS to support configuring RFU by slot.
Configuration Management
0~21
None None
5 Cell
None
Not involved
Not involved
If this paramete r is set to a greater value, the BTS power decrease s too much. If this paramete r is set to a smaller value, the BTS power decrease s insignifica ntly and thus the power decrease effect is The parameter modification unsatisfa has no impact on the ctory. equipment. None
Radio
BSC6900
0~255
None
10 Cell
None
Not involved
Not involved
None
If this parameter is set to a smaller value, the radio resource status is reported too frequently, thus increasing the load of the BSC. If this parameter is set to a greater value, the radio resource status is not The parameter modification immediately reported and thus the BSC has no impact on the cannot handle the interference to the BTS Versions earlier than equipment. in time. BSC6900 V900R011
Radio
RFT
Execute Interval
BSC6900
O&M of BSC
1~100
None
1 None
RNC
None
Not involved
Not involved
None
Equipme nt
RFUCFGBY SLOT
BSC6900
ADD BTS(Optional)
GBFD110000
Enumeration Type
NO(No), YES(Yes)
NO, YES
None NO
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
RGPSINDIC ATION
GPS or RGPS
BSC6900
Satellite card protocol that is enabled to communicate with the satellite card connecting to the DGPS. If "RGPS" is specified, it indicates that the RGPS satellite card protocol is enabled to communicate with the satellite card connecting to the DGPS. If "GPS" is specified, it indicates that the GPS satellite card protocol is enabled to communicate with the satellite card connecting to GBFDthe DGPS. 510401
RGPS(RGPS), GPS(GPS)
RGPS, GPS
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page236of316
150682621.xls.ms_office
Security Level:
RIMSUP
RIM Support
BSC6900
ADD NSE(Optional)
Whether to support ran information management (RIM). IN the RIM procedure, RANs(Radio Access Network) can exchange messages through the core GBFDnetwork. 116301
Enumeration Type
NO(No Support), YES(Support) NO, YES TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None NO
NO
NSE
None
NSE
The SIGBVC must be reset after this switch is turned on. The BSC supports the RIM when the SGSN The transport path should supports be re-established after the the RIM. parameter modification.
None
Equipme nt
RLCN
Channel No.
BSC6900
RLT
The loopback channel number when the port loopback mode is set to TDM remote loopback None Time for disconnecting a call when the MS fails to decode the SACCH. Once a dedicated channel is assigned to the MS, the counter S is enabled and the initial value is set to this parameter value. Each time an SACCH message is not decoded, the counter S decreases by 1. Each time an SACCH message is correctly decoded, the counter S increases by 2. When the counter S is GBFDequal to 0, 111004
None
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
None
None
Not involved
Not involved
None
Equipme nt
Enumeration Type
4_Times, 8_Times, 12_Times, 16_Times, 20_Times, 24_Times, 28_Times, 32_Times, 36_Times, 40_Times, 44_Times, 48_Times, 52_Times, 56_Times, 60_Times, 64_Times
4_Times, 8_Times, 12_Times, 16_Times, 20_Times, 24_Times, 28_Times, 32_Times, 36_Times, 40_Times, 44_Times, 48_Times, 52_Times, 56_Times, 60_Times, 64_Times, step: 480 ms ms
None
52_Times
Cell
None
Not involved
Not involved
None
If this parameter is set to a smaller value, the radio link is vulnerable to failure, thus call drops are likely to occur. If this parameter is set to a greater value, the MS may not release the connection The parameter modification for a long time, thus decreasing the has no impact on the resource usage. The parameter is valid in Versions earlier than equipment. the downlink. BSC6900 V900R011
Radio
RNCID
RNC ID
BSC6900
Transmission mode on the Ater interface of the remote TC subrack RNC ID of a 3G external cell.
GBFD116902 MRFD210301
Enumeration Type
STANDALONET C(Stand Alone TC ), MASTERINPOO LTC(Master in Pool TC), SLAVEINPOOLT STANDALONETC, C(Slave in Pool MASTERINPOOLTC TC) , SLAVEINPOOLTC None None
None
RMTTCATERTRANSMO DE must be set when "ISTCCENTRAL" in the BSC69 "ADD SUBRACK" Read & 00 command is set to YES. Write Read & Write
BSC6900
None
0~4095
None None
0 Cell
None
Not involved
Not involved
None
The BSC should be reset to validate the parameter modification. None The parameter modification has no impact on the equipment. None
Transpor t Equipme nt
RNCINDEX
BSC6900
Internal index of a neighboring RNC. This parameter is set to 255 when the neighboring RNC that serves the 3G external neighboring is not configured. You can use the "LST GNRNC" command to check whether the neighboring RNC is MRFDconfigured. 211402
{{0~6}, {255}}
None
255 None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
RNCINDEX
BSC6900
{0~6}
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
RNCNAME
BSC6900
RootCert
BSC6900
Name of a neighboring RNC. The name is used to uniquely ADD identify a GNRNC(Mandat neighboring MRFDory) RNC. 211402 SET Name of the CERTFILE(Optio root MRFDnal) certificate file 210305
String Type
None
1~64 characters
None None
None
None
None
Not involved
Not involved
None
String Type
None
0~200 characters
None None
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio Equipme nt
ROUTENO
Route No.
BSC6900
BSC6900
Identifies a router uniquely. Router port number. to Whether allow the BTS to report the downlink voice quality index (VQI)
GBFD118603 GBFD118603
Gb over IP
1~100
None None
None
BSC
None
Not involved
Not involved
Not involved
Gb over IP
1~100
None None
None
BSC
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
BSC6900
GBFD116801
Enumeration Type
DISABLE(Disabl e), ENABLE(Enable) , UNSUPPORT(Un DISABLE, ENABLE, support) UNSUPPORT 0.48sec(0.48sec ), 0.96sec(0.96sec ), 1.92sec(1.92sec ), 3.84sec(3.84sec ), 7.68sec(7.68sec ), 15.36sec(15.36s ec), 30.72sec(30.72s 0.48sec, 0.96sec, ec), 1.92sec, 3.84sec, 61.44sec(61.44s 7.68sec, 15.36sec, ec) 30.72sec, 61.44sec 0.48sec(0.48sec ), 0.96sec(0.96sec ), 1.92sec(1.92sec ), 3.84sec(3.84sec ), 7.68sec(7.68sec ), 15.36sec(15.36s ec), 30.72sec(30.72s 0.48sec, 0.96sec, ec), 1.92sec, 3.84sec, 61.44sec(61.44s 7.68sec, 15.36sec, ec) 30.72sec, 61.44sec
None None
DISABLE
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Cell reselection measurement SET report GCELLNWCTRL period in MSRPARA(Opti packet idle GBFDonal) mode. 119107
Enumeration Type
None
15.36sec
Cell
None
Not involved
Not involved
None
Radio
Cell Reselection MR Period in RPTPERIOD Packet Transfer T Mode Decrease rate alarm report threshold
BSC6900
RPTTHD
BSC6900
Cell reselection measurement report SET period in GCELLNWCTRL packet MSRPARA(Opti transmission GBFDonal) mode. 119107 Speed ADD reduction IPLOGICPORT( alarm report Optional) threshold None Whether to allow the BTS to report the voice quality index (VQI). If this parameter is set to Report, the BTS reports the VQI. The BSC collects the traffic statistics on a per VQI basis. There are 11 levels of speech quality. If the level is lower, the speech quality is better. The traffic related to AMR and non-AMR is measured separately, and thus the SET speech GCELLOTHBASI quality is GBFDC(Optional) monitored. 116801
Enumeration Type
None
0.96sec
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
None
20~99
None
20
None
Not involved
Not involved
None
Transpor t
RPTVOICE
BSC6900
Enumeration Type
None None
NO
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page237of316
150682621.xls.ms_office
Security Level:
BSC6900
For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. This parameter indicates the number of enhanced measurement reports received on signaling channels used to filter SET the GCELLHOFITPE REP_QUANT GBFDN(Optional) value. 117501 For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. This parameter indicates the number of enhanced measurement reports received on voice channels used to filter SET the GCELLHOFITPE REP_QUANT GBFDN(Optional) value. 117501 Resource group number of the PATH
ms
None
2 Cell
This parameter is valid only when "MEASURETYPE" in "SET GCELLCCUTRANSYS" is set to EnhMeasReport.
Not involved
Not involved
None
Radio
ms
None
6 Cell
This parameter is valid only when "MEASURETYPE" in "SET GCELLCCUTRANSYS" is set to EnhMeasReport.
Not involved
Not involved
None
Radio
RSCGRPN
Rscgrp No.
BSC6900
None
None
0~2047
None None
None
AAL2 path
When the value of "ADDTORSCGRP" in "ADD AAL2PATH" is set to YES, this parameter is Read & valid. Write
Not involved
Not involved
The resource group The parameter modification must has no impact on the exist. equipment. None
Transpor t
RSCMNGM ODE
BSC6900
RSCMNGM ODE
The parameter indicates whether the resource group is shared or is used by a ADD specific RSCGRP(Manda telecom tory) carrier. None Resource management mode. The logical port working in the SHARE mode can be shared by multiple carriers. The logical port working in the EXCLUSIVE ADD mode can be IPLOGICPORT( used by only Optional) one carrier. None Timer for punishing the neighboring cells when handover failures occur due to resourcerelated causes, such GBFDSET as resources 110601 GCELLHOFITPE being GBFDN(Optional) insufficient 510501 This parameter adjusts "Min RSCP threshold" to enable the selection of 3G candidate GBFDADD cells based 114301 G3GNCELL(Opti on cell GBFDonal) priorities 114302 This parameter determines the layers of 3G neighboring cells. If the measured value of a 3G neighboring cell is lower than this threshold, the 3G neighboring cell is positioned at the bottom layer, that is, layer 4. RSD alarm triggering source RSF alarm triggering source
None
Enumeration Type
None None
None
When "ISFIRSTCLASSE" in "ADD RSCGRP" is set to YES, this parameter is Read & valid. Write
Not involved
Not involved
Not involved
None
Transpor t
None
Enumeration Type
SHARE, EXCLUSIVE
SHARE, EXCLUSIVE
None None
None
IP logical port
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
0~255
None
5 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, call drops may occur due to no suitable neighboring cell for handover. If this The parameter modification parameter is set to a smaller value, has no impact on the handover success rate may be Versions earlier than equipment. decreased. BSC6900 V900R011
Radio
RSCPOFF
RSCP Offset
BSC6900
0~63
dB
None
3 Cell
A 3G cell can be added into the candidate cell queue when the following conditions are met: "INTERRATOUTBSCHO EN" is set to YES; "BET3GHOEN" is set to YES; the RSCP of the 3G cell for a period of time is greater than the sun of "HORSCPTH3G" Read & and "RSCPOFF". Write
Not involved
Not involved
None
If this parameter is set to a greater value, some desired cells may be excluded from the candidate cells, thus leading to call drops. If this parameter is set to a smaller value, The parameter modification an unwanted cell may become a has no impact on the candidate cell, thus leading to handover Versions earlier than equipment. failures. BSC6900 V900R011
Radio
GBFD114301 GBFD114302
Interval Type 0~63 Enumeration Type Enumeration Type BASIS_OF_B1, BASIS_OF_B2 BASIS_OF_B1, BASIS_OF_B2 MINUS_52db(52db), MINUS_48db(48db), MINUS_44db(44db), MINUS_40db(40db), MINUS_36db(36db), MINUS_32db(32db), MINUS_28db(28db), MINUS_24db(24db), MINUS_20db(20db), MINUS_16db(16db), MINUS_12db(12db), MINUS_10db(10db), MINUS_8db(8db), MINUS_6db(6db), MINUS_4db(4db), MINUS_2db(2db), Zerodb(0db), 2db(2db),
dB
None
30 Cell
None
Not involved
Not involved
None
RSDSRC
None
None
None None
None
Board
None
Not involved
Not involved
None
RSFSRC
BSC6900
None
None
None None
None
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
RSLDL
RSLDL
BSC6900
Used for calculating C2. The MS with a large SET value can be GCELLNCRESE assigned with LECTPARA(Opti high access onal) priority. Average downSET bandwidth of BTSBWPARA(M RSL link in andatory) BTS.
GBFD114101
GPRS
Enumeration Type
MINUS_52db, MINUS_48db, MINUS_44db, MINUS_40db, MINUS_36db, MINUS_32db, MINUS_28db, MINUS_24db, MINUS_20db, MINUS_16db, MINUS_12db, MINUS_10db, MINUS_8db, MINUS_6db, MINUS_4db, MINUS_2db, Zerodb, 2db, 4db, 6db, 8db, 10db, 12db, 16db, 20db, 24db, 28db, 32db, 36db, 40db, 44db, 48db, no use
dB
None
MINUS_2db
GBFD111202
O&M of BTS
0~64
kbit/s None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
Not involved
Not involved
None
BSC6900 V900R011
Radio
RSLDSCP
RSL DSCP
BSC6900
Differentiated service code SET of the BTSABISPRIMA specified P(Optional) RSL None
None
0~63
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
RSLPRI
RSL Priority
BSC6900
RSLUL
RSLUL
BSC6900
SET BTSABISPRIMA RSL service P(Optional) priority None Average upSET bandwidth of BTSBWPARA(M RSL link in GBFDandatory) BTS. 111202
None
0~7
None None
None
O&M of BTS
0~64
kbit/s None
None
Not involved
Not involved
Not involved
None
Transpor t
Not involved
Not involved
None
BSC6900 V900R011
Radio
RSLVLANID
BSC6900
RSLWS
BSC6900
None GBFD118601
None
2~4094
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
Abis over IP
0~96
None None
None
BTS
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
RSNDES
Lock Reason
BSC6900
reason for locking the configuration LCK and CMCTRL(Manda management tory) control rights. None
None
Enumeration Type
COMMISSIONIN G(Commissionin g), UPGRADE(Upgr ade), COMMISSIONING, RESTORE(Rest UPGRADE, ore) RESTORE
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
6/9/2013
Page238of316
150682621.xls.ms_office
Security Level:
RSSThres
RSTF
BSC6900
Threshold of the level difference between a neighboring cell and the serving cell, based on which the BSC filters the measured values in the measurement reports and collects traffic statistics during automatic neighboring cell optimization and automatic frequency optimization. The filtering results and collected traffic SET statistics are OTHSOFTPARA later (Optional) submitted to Name of the result file generated after the command is executed. If this parameter is not specified, the name of the result file is automatically generated in the format of BATCH_RST _YYYYMMD DHHNNSSm mm. The result file is located in the ftp directory in the main area of the OMU, and you should not add the path when entering the name. The flag of the RUN main area BATCHFILE(Opti can be onal) queried
GBFD510901
0~127
dB
None
Set this parameter to about 68 in densely populated urban areas and about 72 in BSC69 suburban areas. 00 None
Not involved
Not involved
None
Radio
GBFD111203
O&M of BSC
String Type
None
1~50 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
RSTFUN
Restart switch
BSC6900
ADD OPC(Optional)
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
SCCP
When the value of "SPCBITS" is set to BIT14 or BIT24, this parameter is valid.
BSC6900
The switch is off in the case of a signaling point to the single link. After the link to a signaling point is disconne cted, the restart procedur e is performe d. See The parameter modification the ITU-T has no impact on the Q704. equipment. None
Equipme nt
RSTIME
Restart Timer
BSC6900
ADD BTSPPPLNK(Op tional) ADD BTSMPLNK(Opti onal) Timer Maximum number of TCH channels SET reserved for GCELLCHMGBA emergency SIC(Optional) call users
GBFD118611
1~65535
ms
3000
None
BTS
None
Transpor t
BSC6900
GBFD110202
0~190
None None
0 Cell
This parameter is valid only when "EMCPRILV" in "SET GCELLCCAD" is Read & not set to 15. Write
Not involved
Not involved
None
Radio
BSC6900
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
BSC69 00 None
Not involved
Not involved
Change this paramete r will impact the function interrelat ed with The parameter modification Paramet has no impact on the er 1. equipment. None Change this paramete r will impact the function interrelat ed with The parameter modification Paramet has no impact on the er 10. equipment. None Change this paramete r will impact the function interrelat ed with The parameter modification Paramet has no impact on the er 2. equipment. None Change this paramete r will impact the function interrelat ed with The parameter modification Paramet has no impact on the er 3. equipment. None Change this paramete r will impact the function interrelat ed with The parameter modification Paramet has no impact on the er 4. equipment. None Change this paramete r will impact the function interrelat ed with The parameter modification Paramet has no impact on the er 5. equipment. None Change this paramete r will impact the function interrelat ed with The parameter modification Paramet has no impact on the er 6. equipment. None Change this paramete r will impact the function interrelat ed with The parameter modification Paramet has no impact on the er 7. equipment. None Change this paramete r will impact the function interrelat ed with The parameter modification Paramet has no impact on the er 8. equipment. None
BSC6900 V900R011
Transpor t
BSC6900
None
None
0~4294967295
None None
None
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
BSC6900
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
BSC6900
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
BSC6900
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
BSC6900
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
BSC6900
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
BSC6900
None
None
0~4294967295
None None
None
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
BSC6900
None
None
0~4294967295
None None
None
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
6/9/2013
Page239of316
150682621.xls.ms_office
Security Level:
BSC6900
None
None
0~4294967295
None None
None
BSC69 00 None
Not involved
Not involved
Change this paramete r will impact the function interrelat ed with The parameter modification Paramet has no impact on the er 9. equipment. None
BSC6900 V900R011
Transpor t
BSC6900
Number of reserved idle channels. If this parameter is set too small, the power amplifier of carriers may be frequently enabled/disa bled; if this parameter is set too large, idle carriers SET will not be BSCDSTPA(Opti timely GBFDonal) closed. 111602
0~3
None None
BSC69 2 00 None
Not involved
Not involved
None
Radio
RT
Revertive type
BSC6900
SET MSP(Optional)
GBFD111701
Board Switchover
Enumeration Type
None None
None
BSC6900
The setting of this paramete r must be negotiate d with that on the If the mode is not interconn The parameter modification consistent, will interrupt ected has no impact on the service until it is consistent. side. equipment. None The routing context must be unique and needs to be negotiate The parameter modification d with has no impact on the the peer. equipment. None The parameter modification has no impact on the None equipment. None The parameter modification has no impact on the None equipment. None
Transpor t
BSC6900
RTDEST RTDESTMA SK
BSC6900
BSC6900
ADD M3LE(Optional) ADD M3DE(Optional) ADD OMUIPRT(Mand atory) ADD OMUIPRT(Mand atory)
Routing context.
None
None
0~4294967295
None
4294967295
BSC6900
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
None
None
None
Not involved
Not involved
Not involved
None
None
None
Not involved
Not involved
Not involved
RTIDX
Route Index
BSC6900
Index of the route. The ADD index is BTSIPRT(Option unique in a al) BTS.
GBFD118601
Abis over IP
0~31
None None
None
BTS
None
Not involved
Not involved
None
Radio
RTOALPHA
BSC6900
It is used to calculate the round-trip time of the protocol stack and the RTO value. The value must be smaller than "RTOBETA". In the case of the fixed value of the "RTOBETA", the larger the value is, the ADD less the link SCTPLNK(Optio delay nal) sensitivity is. None It is used to calculate the round-trip time of the protocol stack and the RTO value. The value must be greater than "RTOALPHA" . In the case of the fixed value of the "RTOALPHA" , the larger the value is, ADD the less the SCTPLNK(Optio link delay nal) sensitivity is. None
None
0~100
per cent
12
SCTP 12 link
None
Not involved
Not involved
None
Transpor t
RTOBETA
BSC6900
None
0~100
per cent
25
SCTP 25 link
None
Not involved
Not involved
None
Transpor t
RTOINIT
BSC6900
In the case of the fixed values of the "RTOMIN" and "RTPMAX", the larger the value is, the ADD longer the SCTPLNK(Optio check of the nal) link is. None In the case of the fixed value of the "RTOMIN", the larger the value is, the ADD longer the SCTPLNK(Optio check of the nal) link is. None In the case of the fixed value of the "RTOMAX", the larger the value is, the ADD longer the SCTPLNK(Optio check of the nal) link is. None Whether to measure the delay on the link between the BTSs that serve the calling SET MS and the GCELLBASICPA called MS RA(Optional) respectively. Maximum
None
500~60000
ms
1000
The value to be set should be larger than the value of "RTOMIN" in "ADD SCTPLNK" but smaller than the value of Read & "RTOMAX". Write
Not involved
Not involved
The value should be greater than "RTOMI N" and smaller than "RTOMA X" in the comman d "ADD The parameter modification SCTPLN has no impact on the K". equipment. None The value should be greater than "RTOMI N" in the comman d "ADD The parameter modification SCTPLN has no impact on the K". equipment. None The value should be smaller than "RTOMA X" in the comman d "ADD The parameter modification SCTPLN has no impact on the K". equipment. None
Transpor t
RTOMAX
BSC6900
None
500~60000
ms
3000
The value to be set should be larger than the value of "RTOMIN" in Read & "ADD SCTPLNK". Write
Not involved
Not involved
Transpor t
RTOMIN
BSC6900
None
500~60000
ms
1000
The value to be set should be smaller than the value of "RTOMAX" in "ADD SCTPLNK".
Not involved
Not involved
Transpor t
BSC6900
GBFD115506
None DISABLE
DISABLE
Cell
None
Not involved
Not involved
None
The parameter modification When this parameter is set to on, the has no impact on the MOS of a MS-initiated and MSequipment. terminated call is improved.
BSC6900 V900R011
Radio
RTTYPE
Route Type
BSC6900
number of RTTI TBFs that can be multiplexed on the PDCH. A PDCH can be assigned when the number of RTTI TBFs on it is smaller than the value of this parameter. This parameter is valid only when its value is smaller than or equal to "MSRD PDCH DL Multiplexing GBFDThreshold". 510805 GBFD118601
Latency Reduction
Abis over IP
Interval Type 10~80 10~80 NEXTHOP(Next Enumeration Hop), OUTIF(Out Type Interface) NEXTHOP, OUTIF
None None
30 Cell
None
Not involved
Not involved
None
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
Radio
RUS
BSC6900
Logical port speed increase step. When detecting the available bandwidth increase through IPPM, the system increases the bandwidth of the logical ADD port by using IPLOGICPORT( this Optional) parameter. None
None
0~1000
None
IP logical 5 port
None
Not involved
Not involved
None
Transpor t
6/9/2013
Page240of316
150682621.xls.ms_office
Security Level:
RUSPRD
BSC6900
RVer
BSC6900
RXBW
BSC6900
Bandwidth increase step adjustment period. This parameter indicates the period to increase the bandwidth of the logical port. Note that the actual bandwidth increase step adjustment period is the packet drop ratio Statistics period multiplied by ADD this IPLOGICPORT( parameter Optional) value. None SET R-version BTSAUTODLDA number of CTINFO(Mandat the BTS GBFDory) software 111202 ADD Receive IPPATH(Mandat bandwidth of ory) IP path None
None
1~100
None
IP logical 5 port
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
O&M of BTS
0~999
None None
None
BTS
None
Not involved
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Transpor t
None
1~3000000
kbit/s None
None
RxBw
Backward Bandwidth
BSC6900
Receive bandwidth. The parameter is valid when the " transmission resource group type " is ATM or " transmission resource group type " is IP and the " bandwidth ADD mode " is RSCGRP(Manda FULL_DUPL tory) EX.
None
None
0~4000000
kbit/s None
None
Read & IP path None Write When "GRPT" in "ADD RSCGRP" is set to ATM or "BWMODE" is set to FULL_DUPLEX, this parameter is valid;The sum of "TxBw" and "RxBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "TxBw" and "AllBw" in "ADD RSCGRP"of lower class RSCGRP;The "TxBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "TxBw" in "ADD RSCGRP" of lower class RSCGRP, and the "RxBw" in "ADD Trans RSCGRP" of upper class mission RSCGRP can not less resour than the "RxBw" in "ADD ce RSCGRP" of lower class Read & group RSCGRP. Write
Not involved
Not involved
None
Not involved
Not involved
None
Transpor t
RXLEVACC MIN
Minimum receiving power level for the MS in SET the cell to GCELLSERVPA access the GBFDRA(Optional) system. 114101
GPRS
0~63
None None
2 Cell
None
Not involved
Not involved
None For AMR calls, this paramete r, together with "Interfere HO Qual Thres n for NonAMR FR", is used in interferen ce handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to a smaller value. If the value of this paramete r is too small, the required level of received signals is low. Therefor e, many MSs attempt to camp on the cell, thus increasin g the load of the cell and the risk of call drops. In such a case, you must set the paramete r based on the balance
Radio
RXLEVOFF
For AMR FR voice services, a fixed amount of offset is added to the correspondin g grade of the received signal quality for the interference handover of SET non-AMR FR GCELLAMRQUL voice GBFD(Optional) services. 115501
AMR FR
0~70
None None
5 Cell
None
Not involved
Not involved
Radio
RXMIN
Minimum level of received signals of the SET MS reported GCELLBASICPA in the system GBFDRA(Optional) message. 111101
0~63
dB
None
None
Cell
None
Not involved
Not involved
If this parameter is set to a greater value, The parameter modification the call drop rate decreases but the traffic has no impact on the volume and paging success rate are Versions earlier than equipment. affected. BSC6900 V900R011
Radio
Whether to use the emergency handover algorithm in case the receive level of the MSs drops rapidly, thus preventing call drops
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
In dual-band networking mode for densely populated urban areas, the level drops rapidly due to multiple barriers. The propagation loss of the 1800 MHz frequency band is greater than the propagation loss of the 900 MHz frequency band. Considering the preceding factors, you can set this parameter to YES for the DCS1800 cell. Under normal conditions, set this parameter to No. Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM1. Write
Not involved
Not involved
None
Radio
RXQUAL1
Threshold for the interference handover of Non-AMR FR voice services. AMRFR refers to GBFDSET Adaptive 110601 GCELLAMRQUL Multi-Rate GBFD(Optional) Full Rate. 510501
0~70
None None
None
Cell
None
Not involved
Not involved
This paramete r is used in handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to The parameter modification a smaller has no impact on the value. equipment. None This paramete r is used in handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to The parameter modification a smaller has no impact on the value. equipment. None This paramete r is used in handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to The parameter modification a smaller has no impact on the value. equipment. None
Radio
RXQUAL10
Threshold for the interference handover of Non-AMR FR voice services. AMRFR refers to GBFDSET Adaptive 110601 GCELLAMRQUL Multi-Rate GBFD(Optional) Full Rate. 510501
0~70
None None
None
Cell
None
Not involved
Not involved
Radio
RXQUAL11
Threshold for the interference handover of Non-AMR FR voice services. AMRFR refers to GBFDSET Adaptive 110601 GCELLAMRQUL Multi-Rate GBFD(Optional) Full Rate. 510501
0~70
None None
None
Cell
None
Not involved
Not involved
Radio
6/9/2013
Page241of316
150682621.xls.ms_office
Security Level:
RXQUAL12
Threshold for the interference handover of Non-AMR FR voice services. AMRFR refers to GBFDSET Adaptive 110601 GCELLAMRQUL Multi-Rate GBFD(Optional) Full Rate. 510501
0~70
None None
None
Cell
None
Not involved
Not involved
This paramete r is used in handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to The parameter modification a smaller has no impact on the value. equipment. None This paramete r is used in handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to The parameter modification a smaller has no impact on the value. equipment. None This paramete r is used in handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to a too The parameter modification small has no impact on the value. equipment. None This paramete r is used in handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to The parameter modification a smaller has no impact on the value. equipment. None This paramete r is used in handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to The parameter modification a smaller has no impact on the value. equipment. None This paramete r is used in handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to a too The parameter modification small has no impact on the value. equipment. None This paramete r is used in handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to The parameter modification a smaller has no impact on the value. equipment. None This paramete r is used in handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to a too The parameter modification small has no impact on the value. equipment. None This paramete r is used in handover decision. An uplink interferen ce handover is easily triggered if this paramete r is set to The parameter modification a smaller has no impact on the value. equipment. None The paramete r cannot be modified. Not involved
Radio
RXQUAL2
Threshold for the interference handover of Non-AMR FR voice services. AMRFR refers to GBFDSET Adaptive 110601 GCELLAMRQUL Multi-Rate GBFD(Optional) Full Rate. 510501
0~70
None None
None
Cell
None
Not involved
Not involved
Radio
RXQUAL3
Threshold for the interference handover of Non-AMR FR voice services. AMRFR refers to GBFDSET Adaptive 110601 GCELLAMRQUL Multi-Rate GBFD(Optional) Full Rate. 510501
0~70
None None
None
Cell
None
Not involved
Not involved
Radio
RXQUAL4
Threshold for the interference handover of Non-AMR FR voice services. AMRFR refers to SET Adaptive GCELLAMRQUL Multi-Rate (Optional) Full Rate.
GBFD110601 GBFD510501
0~70
None None
None
Cell
None
Not involved
Not involved
Radio
RXQUAL5
Threshold for the interference handover of Non-AMR FR voice services. AMRFR refers to GBFDSET Adaptive 110601 GCELLAMRQUL Multi-Rate GBFD(Optional) Full Rate. 510501
0~70
None None
None
Cell
None
Not involved
Not involved
Radio
RXQUAL6
Threshold for the interference handover of Non-AMR FR voice services. AMRFR refers to GBFDSET Adaptive 110601 GCELLAMRQUL Multi-Rate GBFD(Optional) Full Rate. 510501
0~70
None None
None
Cell
None
Not involved
Not involved
Radio
RXQUAL7
Threshold for the interference handover of Non-AMR FR voice services. AMRFR refers to SET Adaptive GCELLAMRQUL Multi-Rate (Optional) Full Rate.
GBFD110601 GBFD510501
0~70
None None
None
Cell
None
Not involved
Not involved
Radio
RXQUAL8
Threshold for the interference handover of Non-AMR FR voice services. AMRFR refers to SET Adaptive GCELLAMRQUL Multi-Rate (Optional) Full Rate.
GBFD110601 GBFD510501
0~70
None None
None
Cell
None
Not involved
Not involved
Radio
RXQUAL9
Threshold for the interference handover of Non-AMR FR voice services. AMRFR refers to GBFDSET Adaptive 110601 GCELLAMRQUL Multi-Rate GBFD(Optional) Full Rate. 510501 Number of the RXU ADD chain to TRXBIND2PHYB which the GBFDRD(Mandatory) RXU belongs 111202 Number of the RXU chain. The SET RXU chain BTSRXUBP(Man No. is unique GBFDdatory) in one BTS. 111202 Number of the RXU chain where the board is located
0~70
None None
None
Cell
None
Not involved
Not involved
Radio
BSC6900
O&M of BTS
0~249
None None
None
TRX
None
Not involved
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
0~249
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111202
O&M of BTS
Interval Type 0~249 RXUNAME(By RXU Name), RXUPOS(By RXU Position No), SRNSN(By Subrack No)
0~249
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
Enumeration Type
None None
None
TRX
None
Not involved
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111202
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
RXUNAME
RXU Name
BSC6900
GBFD111202
O&M of BTS
String Type
None
1~64 characters
None None
None
TRX
None
Not involved
Not involved
Not involved
None
Equipme nt
RXUNAME
RXU Name
BSC6900
RXUNAME
RXU Name
BSC6900
Name of the RXU board. The RXU SET name is BTSRXUBP(Man unique in one GBFDdatory) BTS. 111202 ADD BTSRXUBRD(M Name of an GBFDandatory) RXU 111202 Position number of ADD the RXU on TRXBIND2PHYB the RXU GBFDRD(Mandatory) chain 111202 Position No. SET of the RXU BTSRXUBP(Man board on the GBFDdatory) RXU chain 111202
O&M of BTS
String Type
None
1~64 characters
None None
None
BTS
None
Not involved
Not involved
None
O&M of BTS
String Type
None
1~64 characters
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
RXUPOS
BSC6900
O&M of BTS
1~6
None None
None
TRX
None
Not involved
Not involved
Not involved
None
Equipme nt
RXUPOS
BSC6900
O&M of BTS
1~6
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page242of316
150682621.xls.ms_office
Security Level:
RXUPOS
BSC6900
GBFD111202
O&M of BTS
1~6
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
RXUTYPE
BSC6900
SET BTSRXUBP(Man Type of the datory) RXU board Whether to enable the switch to set the S1 value S1 sending value
GBFD111202
O&M of BTS
Enumeration Type
DRRU(DRRU), DRFU(DRFU), MRRU(MRRU), MRFU(MRFU), GRFU(GRFU), DRRU, DRFU, GRRU(GRRU), MRRU, MRFU, BTS3900E(BTS3 GRRU, GRFU, 900E) BTS3900E
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
S1SWITCH
BSC6900
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
Board
None
Not involved
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
S1VALUE
S1 Value
BSC6900
None
None
0~15
None None
None
Board
None
Not involved
Not involved
None
SAADIS
SAAF
BSC6900
Whether to enable the special analog alarm. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDEMUBP(O in another MRFDptional) mode. 210304 The value of this parameter consists of 32 bits, each of which determines whether to enable the correspondin g special analog alarm. "0" indicates that the alarm is enabled, and "1" indicates that the alarm is disabled. When an item is selected, the correspondin g analog alarm switch is disabled. The available items are BT1_DISABL E, SET AH_DISABL BTSAPMUBP(O E, GBFDptional) AT1_DISABL 111202 SAAL link No. of the SPU subsystem. It is the unique number of identifying one SAAL link. This timer is a protection timer waiting for an SAAL response after a link setup request is sent to the SAAL. Whether an MS supports the SAIC function Adjustment
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
O&M of BTS
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
SAALLNKN
BSC6900
None
None
0~1399
None None
None
SAAL link
None
Not involved
Not involved
Not involved
None
Transpor t
SAALTMR
BSC6900
None
None
35000~120000
ms
None
None
MTP3 link
BSC6900
GBFD118103
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
Not involved
Not involved
None
Equipme nt
BSC6900
step of the downlink signal quality threshold in power control algorithm III for MSs that support SAIC. The network side uses a lower downlink signal quality threshold for SAICsupported MSs in power control, thus lowering the transmit power of the correspondin g BTS and reducing the SET interferences GCELLPWR2(O in the whole GBFDptional) network. 118103 Adjustment step of the downlink signal quality threshold in power control algorithm III for MSs that support SAIC. The network side uses a lower downlink signal quality threshold for SAICsupported MSs in power control, thus lowering the transmit power of the correspondin g BTS and reducing the SET interferences GCELLPWR3(O in the whole GBFDptional) network. 118103 The value of this parameter consists of five bits, which determines whether to enable the alarms. "0" indicates that the analog alarm is enabled, and "1" indicates that the analog alarm is disabled. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another MRFDptional) mode. 210304 Index of a cell with the same coverage as the current cell Index type used when the command is executed
0~2
None None
1 Cell
This parameter is valid only when "SAICALLOWED" in "SET GCELLPWRBASIC" is set to YES.
Not involved
Not involved
None
Equipme nt
BSC6900
0~4
None None
3 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
SALOG
BSC6900
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
BSC6900
GBFD111610
0~2047
None None
None
Cell
GBFD111610
Enumeration Type
BYNAME, BYID
None None
None
Cell
This parameter is valid only when "TURNOFFENABLE" is set to YES. This parameter is valid only when "TURNOFFENABLE" is set to YES.
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
The system checks the load of the cell with the same coverage as the current cell and judges the SET check result GCELLDYNTUR once a NOFF(Optional) minute.
GBFD111610
1~16
None None
5 Cell
This parameter is valid only when "TURNOFFENABLE" is set to YES. The following condition must be met: "SAMECVGCELLLOADS TATTM" >= "SAMECVGCELLLOADL Read & ASTTM". Write
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page243of316
150682621.xls.ms_office
Security Level:
BSC6900
The cells that can be disabled are allowed to be disabled only when the same coverage cell SET load is GCELLDYNTUR always below GBFDNOFF(Optional) the threshold. 111610 SET GCELLDYNTUR Name of the NOFF(Mandator same GBFDy) coverage cell 111610 This parameter is used by the BTS to inform the BSC of radio link connection failure. When the BTS receives the SACCH measurement report from the MS, the counter for determining whether a radio link is faulty is set to the value of this parameter. Each time the BTS fails to decode the SACCH measurement report sent by the MS, the counter SET decreases by GCELLCCBASI 1. If the BTS GBFDC(Optional) successfully 111004 The value of this parameter consists of three bits, which determines whether to enable the alarms. "0" indicates that the alarm is enabled, and "1" indicates that the alarm is disabled. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another MRFDptional) mode. 210304 Whether to enable the special alarm switch. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDEMUBP(O in another MRFDptional) mode. 210304 Level specifications of special Boolean value alarms. Two specifications are available: high level and low level. By default, only alarms of the door status sensor are low level, and alarms of the water sensor, smoke sensor, and infrared sensor are high level. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the SET correspondin BTSDEMUBP(O g parameter MRFDptional) in another 210304 Whether to enable the energy SET saving BTSDOMUBP(O function of GBFDptional) the TRX 111202 Whether to enable the special Boolean alarms, that is, water sensor alarm (bit 0), smog sensor alarm (bit 1), and door sensor alarm (bit 2). All the Boolean alarms are enabled by default. "0" indicates that the alarm is enabled, and "1" indicates that the alarm is disabled.The available items are WS_DISABL E, SS_DISABL E, and GS_DISABL SET E~2. BTSAPMUBP(O In multi-mode GBFDptional) scenario, the 111202 Number of the BTS. The BTS is COL numbered SYNCINFO(Man uniquely in a GBFDdatory) BSC. 118201 Name of the BTS. The BTS is COL named SYNCINFO(Man uniquely in a datory) BSC. This parameter indicates that when the MS reports the EMR, it adds the value of this parameter to the received signal level, and then converts the result into the RXLEV value. For details, see GSM Rec. 05.08. If the SCALE_Ord er reported by the MS is 10 dBm, level values 0-63 map with 100 dBm to 37 dBm. If the SCALE_Ord er reported SET by the MS is GCELLCCUTRA 0 dBm, level NSYS(Optional) values 0-63
0~100
per cent
None
50 Cell
This parameter is valid only when "TURNOFFENABLE" is set to YES. This parameter is valid only when "TURNOFFENABLE" is set to YES.
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Equipme nt
BSC6900
String Type
None
1~64 characters
None None
None
Cell
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
SAMULFRM
SACCH MultiFrames
BSC6900
ms
None
32 Cell
None
Not involved
Not involved
None
Radio
SAS
BSC6900
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
SASE
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
SASV
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
SBAF
O&M of BTS
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
SBTSID
BSC6900
SoftSynchronized Network
0~2047
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
SBTSNAME
BSC6900
GBFD118201
SoftSynchronized Network
String Type
None
1~64 characters
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
SCALEORD ER
SCALE_ORDER
BSC6900
GBFD117501
Enumeration Type
ADD0dB
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page244of316
150682621.xls.ms_office
Security Level:
SCDSCP
DSCP of STREAM[QoS]
BSC6900
DSCP correspondin SET g to the BSCPSTCDSCP streaming GBFDMAP(Optional) service. 118603 When the network receives measurement reports, in consideration of the accuracy of a single measurement report, the measurement values in certain measurement reports are filtered to represent the radio operating environment. The parameter specifies the number of measurement reports used for filtering measurement SET information of GCELLHOFAST( the serving GBFDOptional) cell. 510102 Number of the cell ADD where the NCELL(Mandato TRX reside. ry) The cell is COL numbered SYNCINFO(Man uniquely in a datory) BSC. ADD NCELL(Mandato ry) COL SYNCINFO(Man Name of cell datory) 1.
Gb over IP
0~63
None None
26 BSC
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
ms
None
4 Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
Radio
SCELLID
BSC6900
MRFD210301
Configuration Management
0~2047
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
BSC6900
GBFD111202
O&M of BTS
String Type
SCHEME
Coding Scheme
BSC6900
SCHNNO
BSC6900
A key parameter that indicates the coding scheme of a simple cell broadcast message Number of the subchannel
GBFD113602 GBFD111202
Enumeration Type
None GERMAN(GERM AN), ENGLISH(ENGLI SH), ITALIAN(ITALIA N), FRENCH(FRENC H), SPANISH(SPANI SH), DUTCH(DUTCH), SWEDISH(SWE DISH), DANISH(DANISH ), PORTUGUESE( PORTUGUESE), FINNISH(FINNIS H), NORWEGIAN(N ORWEGIAN), GREEK(GREEK) , TURKISH(TURKI SH), HUNGARIAN(HU NGARIAN), POLISH(POLISH ), GB2312(GB2312 ), KOI8-R(Cyrillic KOI8-R), KOI8U(Cyrillic KOI8U), KOI8(Cyrillic
1~64 characters
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
GERMAN, ENGLISH, ITALIAN, FRENCH, SPANISH, DUTCH, SWEDISH, DANISH, PORTUGUESE, FINNISH, NORWEGIAN, GREEK, TURKISH, HUNGARIAN, POLISH, GB2312, KOI8-R, KOI8-U, KOI8, WINDOWS1251, ASMO_449, WINDOWS-1256, WINDOWS-874, WINDOWS-1253, WINDOWS-1254, WINDOWS-1255, WINDOWS-1257, WINDOWS-1250, WINDOWS-1252, BINARY, UCS2, RCS-1, RCS-2, RCS3, RCS-4, RCS-5 None None
None
Cell
None
Not involved
Not involved
None
O&M of BTS
0~7
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio Equipme nt
BSC6900 V900R011
SCMD
Command String
BSC6900
Command string of the scheduled subtask. This command can be only a service command, and the ADD system SUBTSK(Mandat command ory) cannot be ADD added to the SUBCMD(Manda scheduled GBFDtory) subtask. 111203 Type of querying the scope of SET collecting the GMRSCOPE(Ma measurement GBFDndatory) report 111203 Indicates the index of the ADD inter-subrack SRCONPATH(O connection ptional) path. Scrambling code of a 3G cell. The scrambling code is used to differentiate terminals or cells. It is used after spread spectrum. Therefore, it does not change the bandwidth of signals, but only distinguishes the signals from different sources. Through scrambling, multiple transceivers can use the same codes ADD for spread GEXT3GCELL( spectrum. Optional) Scrambling is SET used to GCELLHOFDDB distinguish A2(Mandatory) terminals on
O&M of BSC
Any Type
None
Valid command string, without the ';'an the end of the string.
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
SCOPETYP E
Scope Type
BSC6900
O&M of BSC
Enumeration Type
BYBTSID, BYCELLID
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
SCPIDX
BSC6900
GBFD111203
O&M of BSC
0~23
None None
None
None
None
Not involved
Not involved
None
Equipme nt
SCRAMBLE
BSC6900
GBFD114301 GBFD114302
0~511
None None
None
Cell
None
Not involved
Not involved
SCRAMBLE SW
Scramble Switch
BSC6900
SET E1T1(Optional)
Scramble switch
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
E1/T1 port
None
BSC6900
The parameter modification has no impact on the None equipment. None The setting of DIP switches must be consisten t with that on the interconn The parameter modification ected has no impact on the side. equipment. None The setting of this paramete r must be consisten t with The parameter modification that on has no impact on the the peer. equipment. None
Radio
Transpor t
SCRAMBLE SW
Scramble switch
BSC6900
SET OPT(Optional)
Scramble switch
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
Board
None
BSC6900
Transpor t
scsn
BSC6900
EXP ALMLOG(Option al) Start serial STA number of ALMLOG(Option the alarm al) record ADD SCTPLNK(Mand atory) ADD M3LNK(Mandato ry)
MRFD210304
Faulty Management
1~2147483646
None
1 RNC
None
Not involved
Not involved
None
Equipme nt
SCTPLNKN
BSC6900
SCTP link No. of one subsystem.T his number identify an SCTP link uniquely. None
None
0~1199
None None
None
SCTP link
None
Not involved
Not involved
Not involved
None
Transpor t
SD
Start Date
BSC6900
Date when the ADD scheduled SUBTSK(Mandat task is ory) started Start date of the alarm record. By EXP default, the ALMLOG(Option start date is al) 2000-01-01. Start date of the alarm record. By STA default, the ALMLOG(Option start date is al) 2000-01-01. Maximum number of days for SET storing ALMCAPACITY( history Optional) alarms
GBFD111203
O&M of BSC
Compound Type
2000-1-1~2037-1231
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
sd
Start Date
BSC6900
MRFD210304
Faulty Management
Compound Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
sd
Start Date
BSC6900
MRFD210304
Faulty Management
Compound Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
sd
BSC6900
MRFD210304
Faulty Management
7~90
None
None
RNC
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page245of316
150682621.xls.ms_office
Security Level:
SDALMTHD
SD Alarm Threshold
BSC6900
SDATE
Start Date
BSC6900
SD alarm SET triggering MSP(Optional) threshold STR BTSLOG(Option al) Start date
GBFD111701 GBFD111202
Board Switchover
None
1.00E-06
BSC6900
O&M of BTS
None None
None
None
None
Not involved
Not involved
SDAY
Start date
BSC6900
SET TZ(Mandatory)
Start date of the daylight saving time (DST) Number of SDCCH channels. Rules for SDCCH channel allocation: 1. Allocate channels 1 and 3 of main frequency B preferentially. 2. Allocate channels 1, 3, 5, and 7 according to the physical position order of the frequencies. Thus, the maximum number of SDCCH channels is (actual number of frequencies 1) *4+2. Level threshold for measuring the number of call drops on SDCCH. When call drop occurs on the SDCCH, the BSC determines whether the downlink receive level is lower than this threshold. If the downlink receive level is lower than this threshold and the TA is smaller than the TA threshold of the serving cell, the number of call drops on SDCCH (receive level) is incremented Quality threshold for measuring the number of call drops on SDCCH. When call drop occurs on the SDCCH, the BSC determines whether the downlink quality level multiplied by 10 is higher than this threshold. If all the following four conditions are met, the number of call drops on SDCCH (receive quality) is incremented by one. First, the downlink quality level multiplied by 10 is higher Level threshold for measuring the number of call drops on SDCCH. When call drop occurs on the SDCCH, the BSC determines whether the uplink receive level is lower than this threshold. If the uplink receive level is lower than this threshold and the TA is smaller than the TA threshold of the serving cell, the number of call drops on SDCCH (receive level) is incremented by one. Quality threshold for measuring the number of call drops on SDCCH. When call drop occurs on the SDCCH, the BSC determines whether the uplink quality level multiplied by 10 is higher than this threshold. If all the following four conditions are met, the number of call drops on SDCCH (receive quality) is incremented by one. First, the uplink quality level multiplied by 10 is higher
MRFD210301
Configuration Management
1~31
None
None
BSC69 00 None
Not involved
Not involved
The setting of this paramete r must be negotiate d with that on the interconn The parameter modification ected has no impact on the side. equipment. None The parameter modification has no impact on the None equipment. None 1. If you set the start date or end date of DST to a day of the week after a specific date, the specific date must be six days or more days prior to the last day of the month. For example, the last day of October is the 31st day. Then, the specific The parameter modification date has no impact on the cannot equipment. None
Transpor t Equipme nt
BSC6900 V900R011
Equipme nt
SDCCHNUM
GBFD510701
1~191
None
1 None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
SDDROPST ATDLLEV
GBFD111004
0~63
dB
6 Cell
None
Not involved
Not involved
The level values 0 through 63 map to -110 dBm to 47 dBm. A smaller value indicates a lower The parameter modification receive has no impact on the level. equipment. None
Radio
SDDROPST ATDLQUAL
BSC6900
GBFD111004
0~70
None None
55 Cell
None
Not involved
Not involved
The paramete r value correspo nds to RQ (quality level: 0 to 7) multiplied by 10. A greater value indicates a poorer The parameter modification receive has no impact on the quality. equipment. None
Radio
SDDROPST ATULLEV
GBFD111004
0~63
dB
6 Cell
None
Not involved
Not involved
The level values 0 through 63 map to -110 dBm to 47 dBm. A smaller value indicates a lower The parameter modification receive has no impact on the level. equipment. None
Radio
SDDROPST ATULQUAL
BSC6900
GBFD111004
0~70
None None
55 Cell
None
Not involved
Not involved
The paramete r value correspo nds to RQ (quality level: 0 to 7) multiplied by 10. A greater value indicates a poorer The parameter modification receive has no impact on the quality. equipment. None
Radio
6/9/2013
Page246of316
150682621.xls.ms_office
Security Level:
SDDYN
BSC6900
Whether to allow SDCCH dynamic allocation. This parameter specifies whether the dynamic adjustment between SET TCHs and GCELLBASICPA SDCCHs is GBFDRA(Optional) allowed. 113001
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
The SDCCH dynamic adjustme nt converts the TCHs to the SDCCHs, this reduces the available TCHs and decrease s the TCH traffic bearing The parameter modification capability has no impact on the . equipment. None The setting of this paramete r must be negotiate d with that on the interconn The parameter modification ected has no impact on the side. equipment. None
Radio
SDENABLE
SD Enable
BSC6900
SET MSP(Optional)
Enable SD
GBFD111701
Board Switchover
Enumeration Type
DISABLE, ENABLE
DISABLE, ENABLE
None None
DISABLE
BSC6900
Transpor t
BSC6900
SDFLAG
BSC6900
Whether to enable the SDCCH quick handover test function. If this parameter is set to Yes, the BSC initiates intracell SDCCH handover as soon as the MSC issues an encrypted command to the MS. Thus, the forwarding encrypted signaling can be transmitted and received on a new signaling channel. In this way, the SET network GCELLSOFT(O security is ptional) improved. Whether to enable the BSC to shut down the power amplifier of the TRX automatically to save power when the BTS switches SET from the GTRXDEV(Optio mains to nal) batteries After a new SDCCH is assigned to an MS, the MS can be handed over to another channel only if the time during which the MS occupies the SDCCH is longer than the period SET specified by GCELLHOCTRL this (Optional) parameter. Maximum number of discarded MRs allowed on the SDCCH in a SET power GCELLPWR3(O control ptional) period. Period in which level penalty is performed on the neighboring cells of the cell where a fast-moving MS is located. The neighboring cells must be located at the Macro, Micro, or Pico layer ADD other than GEXT2GCELL( the Umbrella Optional) layer. Level value of the penalty that is performed on the neighboring cells of the cell where a fast-moving MS is located. The neighboring cells must be located at the Macro, Micro, or Pico layer ADD other than GEXT2GCELL( the Umbrella Optional) layer. DSCP SET correspondin BSCPSTCDSCP g to the MAP(Optional) signalling.
GBFD110608
SDCCH Handover
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
None
The parameter modification If this function is enabled after encryption has no impact on the is enabled, the network security can be equipment. improved.
Radio
GBFD111605
Enumeration Type
None None
None
TRX
None
Not involved
Not involved
None
The parameter modification has no impact on the The TRX is shut down automatically, and equipment. the capacity of the cell is decreased.
Equipme nt
BSC6900
GBFD110601 GBFD510501
0~60
None
2 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. If this parameter is set to a smaller value, unexpected handovers may be performed The parameter modification due to incorrect MR when the call is has no impact on the initially set up, thus affecting handover Versions earlier than equipment. success rate. BSC6900 V900R011
Radio
SDMRCUTN UM SdMrCutNum
BSC6900
GBFD117601
0~5
None None
1 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
BSC6900
GBFD110601 GBFD510501
0~255
None
40 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, the handover to micro cells becomes difficult, and congestion may occur in macro cells. If this parameter is set to a The parameter modification smaller value, unnecessary handovers are has no impact on the performed, thus affecting the voice Versions earlier than equipment. quality. BSC6900 V900R011
Radio
SDPUNVAL
BSC6900
GBFD110601 GBFD510501
0~63
dB
None
30 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, the handover to micro cells becomes difficult, and congestion may occur in macro cells. If this parameter is set to a The parameter modification smaller value, unnecessary handovers are has no impact on the performed, thus affecting the voice Versions earlier than equipment. quality. BSC6900 V900R011 The parameter modification has no impact on the equipment. None
Radio
SDSCP
GBFD118603
Gb over IP
0~63
None None
56 BSC
None
Not involved
Not involved
Not involved
None
Transpor t
SDSFPRI
SDSF Priority
BSC6900
SDT
Shutdown Temperature
BSC6900
BSC6900
Specifies the SF and SD event priority High temperature threshold for triggering power shutdown of the battery. If the power shutdown upon battery high temperature is enabled and the battery temperature is higher than the value of this parameter, the battery is automatically powered off. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the SET correspondin BTSAPMUBP(O g parameter ptional) in another Sliding time window for collecting statistics on the alarms that disappear in ADD a specified BTSALMMGMR period of ULE(Mandatory) time Sliding time SET MSP(Optional) window for collecting statistics on the alarms that occur in ADD a specified BTSALMMGMR period of ULE(Mandatory) time
GBFD111701
Board Switchover
Enumeration Type
HIGH(HIGH), LOW(LOW)
HIGH, LOW
None None
None
Not involved
Not involved
Not involved
None
Transpor t
GBFD111202
O&M of BTS
40~70
53 BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
0~65535
None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
MRFD210304
Faulty Management
0~65535
None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page247of316
150682621.xls.ms_office
Security Level:
SDV
Shutdown Voltage
BSC6900
Low voltage threshold for triggering power shutdown of the battery. If the power shutdown upon low voltage is enabled and the load voltage is lower than the value of this parameter, the battery is automatically powered off. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202
O&M of BTS
None
If "Power System Type" is "APM30" and the BTS type is one of the BTS3900 series, the recommended value is "465". If "Power System Type" is "SC48200", the recommended value is "460". Otherwise, the recommended value is "430". BTS
The value of this parameter must be smaller than "DC Voltage Read & Lower Threshold". Write
Not involved
Not involved
None
Equipme nt
SEARCH3G SELFVERSI ON
3G Search PRIO
BSC6900
Self Version
BSC6900
Whether to allow the MS to search for a 3G cell SET when the GCELLCCUTRA BSIC must GBFDNSYS(Optional) be decoded. 117501 SET Self BTSLOADCTRL( Software GBFDMandatory) Version 111202 Whether the SI Type 3 message SET contains the OTHSOFTPARA 2QUATER GBFD(Optional) indicator. 111101 Whether to report BSS INVOKE TRACE message. When the parameter is set to YES, the BSC sends a BSS INVOKE TRACE message to the MSC if receiving an MSC INVOKE TRACE or BSS INVOKE TRACE message from MSC in the case of an outgoing BSC handover. If the BSC does not receive the message, the BSC does SET not send a OTHSOFTPARA BSS INVOKE GBFD(Mandatory) TRACE 116401 Whether to report the classmark queried by the BSC to the MSC
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
O&M of BTS
String Type
None
1~63 characters
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio Equipme nt
BSC6900 V900R011
BSC6900
Enumeration Type
NO, YES
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Radio
Spt BSS Invoke SendBssInvo Trace Rpt[end2end keTrace user trace] BSC6900
NO(No), YES(Yes)
NO, YES
None None
NO
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
SendConfusi onToMSC
BSC6900
Whether to send a CONFUSION message to the MSC. This parameter specifies whether to send a message carrying fault location information to the MSC if the BSC receives a message that cannot be SET decoded AITFOTHPARA( over the A GBFDOptional) interface. 111804 If this parameter is set to No, the BSC responds with an SAPI N'Reject message against the SET DL short OTHSOFTPARA message GBFD(Optional) after hangup. 110203 Priority of the notification message transmission on the FACCH. From high to low, the priorities are A, B, 0, 1, 2, 3, 4. No priority is the lowest. When the priority of the group call is higher than or equal to the value specified by this parameter, the notification SET message is GCELLGSMR(O sent on the GBFDptional) FACCH. 510307 Priority of the paging message transmission on the FACCH. From high to low, the priorities are A, B, 0, 1, 2, 3, 4. No priority is the lowest. When the priority of the group call is higher than the value specified by this parameter, the paging SET message is GCELLGSMR(O sent on the GBFDptional) FACCH. 510307 Whether the BSC sends the System SET Information OTHSOFTPARA Type 2ter (Optional) message. Whether the BSC sends the System SET Information OTHSOFTPARA Type 5ter (Optional) message.
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
MSC
None
Not involved
Not involved
This paramete r should be set on the basis of the negotiati on with the MSC The parameter modification at the has no impact on the peer end. equipment. None
Equipme nt
BSC6900
NO(No), YES(Yes)
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Radio
Enumeration Type
NoPriority(No Priority), Priority4(Priority 4), Priority3(Priority3 ), Priority2(Priority 2), Priority1(Priority 1), Priority0(Priority 0), PriorityB(Priority NoPriority, Priority4, B), Priority3, Priority2, PriorityA(Priority Priority1, Priority0, A) PriorityB, PriorityA
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Enumeration Type
NoPriority(No Priority), Priority4(Priority 4), Priority3(Priority3 ), Priority2(Priority 2), Priority1(Priority 1), Priority0(Priority 0), PriorityB(Priority NoPriority, Priority4, B), Priority3, Priority2, PriorityA(Priority Priority1, Priority0, A) PriorityB, PriorityA
None None
None
Cell
None
Not involved
Not involved
None
Radio
SENDSI2TE RFLAG
BSC6900
GBFD111101
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
BSC69 00 None
Not involved
Not involved
None
Radio
SENDSI5TE RFLAG
BSC6900
GBFD111101
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Radio
6/9/2013
Page248of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
Whether the SI Type 3 message contains the 3G Early Classmark Sending Restriction field. The 3G Early Classmark Sending Restriction field is used to notify the MS of whether the early classmark message contains the 3G classmark message. This parameter is valid for dualmode MSs SET and is invalid OTHSOFTPARA for single(Optional) mode MSs. SPT Split position BTSRXUCHAIN( on the RXU Mandatory) chain Whether to enable the BTS to support the separation between the physical and logical
GBFD111101 GBFD111202
Enumeration Type
NO, YES
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
O&M of BTS
1~5
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
SEPERATE MODE
Separate Mode
BSC6900
ADD BTS(Optional)
GBFD111202
O&M of BTS
Enumeration Type
UNSUPPOR None T
UNSUPPORT
BTS
None
BTS
None
Equipme nt
BSC6900
Number of the command listening port of the server. You should not use any port number SET occupied by FTPSSRV(Mand other GBFDatory) applications. 111203 Number of the data port of the server in active mode. You should not use any port number SET occupied by FTPSSRV(Mand other GBFDatory) applications. 111203 Delivery ADD serial number BTSRETANT(Ma of the RET MRFDndatory) antenna 210602 IP address of the FTP ADD server to be FTPSCLTDPOR visited by the GBFDT(Mandatory) FTP client 111203 SET Service BSCBASIC(Opti mode of the GBFDonal) BSC 118602 Service ADD bearer mode GBFDBTS(Optional) of the BTS 118601
O&M of BSC
1000~65535
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
SERDATAP ORT
BSC6900
1000~65535
None None
None
RNC
None
Not involved
Not involved
None
SERIALNO
BSC6900
String Type
None
1~17 characters
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
ServerIP
BSC6900
O&M of BSC
IP Address Type
BSC6900
A over IP
BSC6900
Abis over IP
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The BSC should be reset to validate the parameter modification. None The BTS should be reset to validate the parameter modification. None
Equipme nt
None SEPARATE
SEPARATE
BSC69 00 None
BSC6900
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Transpor t
None TDM
TDM
BTS
None The value range of this parameter varies with "BTS Type". Different types of BTSs support different types of services.
BTS
None
BSC6900
Enumeration Type
TDM, HDLC, IP
TDM, HDLC, IP
None None
None
BTS
BTS
None
Equipme nt
BSC6900
EXP LOG(Optional)
GBFD111203 MRFD210305
Enumeration Type
SYSTEM(Syste m Command), CONFIG(Configu ration Management), MAINTAIN(Maint enance Management), STAT(Statistic Measurement), SYSTEM, CONFIG, ALARM(Alarm MAINTAIN, STAT, Management) ALARM OML(OML), RSL(RSL), EML(EML), ESL(ESL), CSVOICE(CS Voice), CSDATA(CS Data), PSHIGHPRI(PS High PRI), PSLOWPRI(PS Low PRI), OTHERDATA(Ot her Data)
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
Service type of the BTS. The QoS processing depends on the DSCP, VLAN ID, and VLAN priority that vary SET according to BTSVLAN(Mand the service atory) type. SET BTSAPMUBP(O ptional) SET BTSDPMUBP(O ptional)
GBFD118601
Abis over IP
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
Whether to enable the diesel engine parameters to be GBFDconfigured 111202 Whether to enable the environment temperature alarm parameters of the APMU to be configured. The APMU of the APM30 type does not support this parameter. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Whether to enable the environment temperature parameters to be configured. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Whether to enable the environment humidity alarm parameters of the board to be configured. In multi-mode scenario, the value of this parameter in this mode must be the SET same as the BTSAPMUBP(O value of the ptional) correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Number of the SFP port. If the switching relation is added on the SFP port, it indicates that the SFP port is used to connect the BBU and no RXU chain or ring can be configured on GBFDthe port. 111202
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
SFPPORTN O
SFP Port No
BSC6900
O&M of BTS
0~2
None None
None
BTS
None
Not involved
Not involved
None
Radio
6/9/2013
Page249of316
150682621.xls.ms_office
Security Level:
SGSNCAP
BSC6900
ADD Available SGSNNODE(Opt capacity of ional) the SGSN. It is valid when the node type is set to IUPS. If the parameter is set to No, it indicates the GGSN. The ADD dpx needs ADJNODE(Mand not to be atory) configured.
GBFD119701
SGSN Pool
0~65535
None
1800
1800 BSC
None
Not involved
Not involved
The ratio of the subscribe rs accessin g this SGSN is affected when this paramete The parameter modification r is has no impact on the modified. equipment. None
Radio
SGSNFLG
SGSN FLAG
BSC6900
None
None
Enumeration Type
NO(GGSN), YES(SGSN)
NO, YES
None None
None
When the value of "NODET" in "ADD ADJNODE" is set to Adjace IUPS, this parameter is nt node valid.
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
BSC6900
MRFD210301
Configuration Management
String Type
None
1~20 characters
None None
None
BSC
None
Not involved
Not involved
Not involved
None
Equipme nt
BSC6900
Length of the NRI or NULLNRI. The length determines the maximum value of the NRI and GBFDNULL-NRI. 119701 Special NRI. Each SGSN pool has one NULL-NRI. When the NRI value in the TLLI of the MS uplink/downli nk service data equals NULL-NRI, the BSC reselects an SGSN for the MS. Whether to enable the SGSN pool function
SGSN Pool
1~10
None None
None
This parameter is valid when BSC69 "SGSNPOOLALLOW" is Read & 00 set to YES. Write
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD119701
SGSN Pool
0~1023
None
This parameter is valid when BSC69 "SGSNPOOLALLOW" is Read & 0 00 set to YES. Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
BSC6900
GBFD119701
SGSN Pool
Enumeration Type
NO(No), YES(Yes)
NO, YES
None NO
NO
BSC69 00 None
Not involved
Not involved
None
Equipme nt
SGSNR
BSC6900
GPRS
Enumeration Type
0( Release 98 or older), 1(Release Release 98 or older, 99 onwards) Release 99 onwards None None
None
Cell
None
Not involved
Not involved
BSC6900
Administrativ e state of the SGSN. The value "ALLOW" indicates that the SGSN can handle the PS services normally. The value "UNISTALL" indicates that the SGSN does not permit new PS services to access the network and the ongoing PS services are not affected. The value "DENY" indicates that ADD the SGSN SGSNNODE(Opt denies all PS GBFDional) services. 119701 Usage threshold of the CPU for call access from other CPU. If the usage of the CPU exceeds the threshold, the call access request is GBFDdiscarded. 111705 Slot No. of the load sharing interface board
SGSN Pool
Enumeration Type
ALLOW
BSC
None
BSC6900
Services are interrupted until the parameter is set to ALLOW or the cell is configured with a new SGSN.
None If this SGSN is the last SGSN connectin g this cell: 1. When the paramete r is set to DENY, the services of all the online subscribe rs are interrupte d and new subscribe rs cannot access the network. 2. When the paramete r is set to UNINSTA LL, the The parameter modification services has no impact on the of all the equipment. None
Radio
Radio
50~95
per cent
None
BSC69 75 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
SHARESN
BSC6900
BSC6900
GBFD111203 GBFD118701
O&M of BSC
0~27
None None
None
None
None
Not involved
Not involved
Not involved
RAN Sharing
shldflg
Shield Flag
BSC6900
SET ALMSHLD(Mand Shield flag of MRFDatory) the alarm 210304 Delay for which the BTS waits to shut down the TRX after switching SET from the BTSBAKPWR(O mains to GBFDptional) batteries 111605 Whether the BSC sends a System Information Type 2ter message to a nondualband cell. When the parameter is set to YES, the cell does not send the System Information Type 2ter message if the cell is not configured with interfrequency neighboring cells. If the cell is configured with interfrequency neighboring cells, the cell sends the SET System OTHSOFTPARA Information GBFD(Optional) Type 2ter 111101 Whether to enable a handover between signaling channels
Faulty Management
Enumeration Type
None NO
None
BTS
None
Cell
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None The parameter modification has no impact on the equipment. None
Transpor t Equipme nt
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
BSC6900
0~12
None
3 BTS
This parameter is valid only when the cell parameter "BAKPWRSAVMETHOD " is set to BYPWR and "SDFALG" in "SET GTRXDEV" is set to Read & ENABLE. Write
Not involved
Not involved
None
Equipme nt
BSC6900
Enumeration Type
NO, YES
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Radio
BSC6900
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None
Radio
SIGLAST
BSC6900
Number of times that the downlink signal strength exceeds the GBFDthreshold. 118201
SoftSynchronized Network
1~10
None
4 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
SIGLKSX
BSC6900
ADD MTP3RT(Manda tory) ADD MTP3LKS(Mand atory) ADD To identify an MTP3LNK(Mand signaling link atory) set uniquely. None ADD M3RT(Mandator y) ADD M3LKS(Mandato ry) To identify an ADD signaling link M3LNK(Mandato set index ry) uniquely. None M3UA link ID ADD of the M3LNK(Mandato specified link ry) set. None
None
0~182
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
SIGLKSX
BSC6900
None
0~182
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
SIGLNKID
Signaling link ID
BSC6900
None
0~15
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page250of316
150682621.xls.ms_office
Security Level:
SIGLW
BSC6900
SIGLW
BSC6900
SIGNALSP
Signalling local weight over the local NSVL. When this parameter is set to a larger value, the NS is more likely to select this IP point according to the load sharing function of the NSVC link of the IP network if the ADD NS sends a NSVLLOCAL(Op signalling tional) message. Signalling local weight over the remote NSVL. When this parameter is set to a larger value, the NS is more likely to select this IP point according to the load sharing function of the NSVC link of the IP network if the ADD NS sends a NSVLREMOTE( signalling Optional) message. SET Priority of the BSCSRVPRI(Op signaling tional) service
GBFD118603
Gb over IP
0~255
None
100
100 NSE
None
NSE
The ratio of Gb interface signalling message s sent through NSVLs is affected when this paramete r is modified. When this NSVL is the last NSVL of the normal state in the NSE, if "SIGLW" is set to 0, the signalling exchange between the NSE and SGSN is The parameter modification interrupte has no impact on the d. equipment. None
Equipme nt
GBFD118603 GBFD118605
Gb over IP
0~255
None
100
100 NSE
None
Not involved
Not involved
None
IP QOS
0~7
None None
None
BSC69 00 None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Transpor t
SIGOBS
SoftSynchronized Network
1~10
None
5 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
BSC6900
Number of measurement reports used for averaging the signal quality of signaling channels. This parameter helps avoid sharp drop of signal levels caused by Raileigh fading and to ensure GBFDSET correct 110601 GCELLHOFITPE handover GBFDN(Optional) decisions. 510501 MTP3 link ID ADD of the MTP3LNK(Mand specified link atory) set. None Number of measurement reports used for averaging the signal strength of signaling channels. This parameter helps avoid sharp drop of signal levels caused by Raileigh fading and to ensure SET correct GCELLHOFITPE handover N(Optional) decisions. Minimum interval between the successful TBF establishmen t and the first initiation of the Packet Timeslot SET Reconfigurati BSCPSSOFTPA on RA(Optional) procedure.
ms
None
2 Cell
None
Not involved
Not involved
None
Radio
SIGSLC
None
0~15
None None
None
MTP3 link
None
Not involved
Not involved
Not involved
None
Transpor t
SIGSTRFLT LEN
BSC6900
GBFD110601 GBFD510501
ms
None
2 Cell
None
Not involved
Not involved
None
Radio
SilenceTicks OfResReq
GBFD119303
Load Sharing
0~65535
ms
None
3000 BSC
None
Not involved
Not involved
None
Radio
BSC6900
Single pass exclude MSISDN number 1. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 10. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 11. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 12. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 13. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page251of316
150682621.xls.ms_office
Security Level:
BSC6900
Single pass exclude MSISDN number 14. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 15. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 16. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 17. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 18. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 19. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 2. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 20. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 3. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 4. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 5. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 6. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page252of316
150682621.xls.ms_office
Security Level:
BSC6900
Single pass exclude MSISDN number 7. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 8. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203 Single pass exclude MSISDN number 9. Certain numbers, such as the premium rate number, are not used for the single pass check. The number SET is stored in BSCBASIC(Opti character GBFDonal) string. 111203
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BSC
String Type
None
1~32 characters
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
SIPADDR
PING IP(Mandatory)
Source IP address
None
None
IP Address Type
None
None
Not involved
Not involved
The source IP address can be: local IP address of the PPP link (PEUa/P OUa/PO S), local IP address of the MP group ((PEUa/P OUa), IP address of the Ethernet port of the local port (FG2a/G OUa), and IP address of the The parameter modification local has no impact on the board. equipment. None The paramete r cannot be modified. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r.
Transpor t
SIPADDR
None
None
IP Address Type
None
None
None
None
Not involved
Not involved
Not involved
Not involved
None
Transpor t
SIPDL
BSC6900
WCDMA IMS signaling ADD service TRMFACTOR(O downlink ptional) factor None
None
0~100
per cent
15
BSC69 15 00 None
Not involved
Not involved
Transpor t
BSC6900
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR or IUPS, Read & 00 this parameter is valid. Write
Not involved
Not involved
Transpor t
SIPSECPAT H
BSC6900
IMS signaling service ADD bearer TRMMAP(Option secondary al) path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
Transpor t
6/9/2013
Page253of316
150682621.xls.ms_office
Security Level:
SIPUL
BSC6900
SITES
Sites
BSC6900
WCDMA IMS ADD signaling TRMFACTOR(O service uplink ptional) factor None which sites of COL log to be GBFDLOG(Optional) collected. 111203 Zone where the BTS synchronizes with other BTSs. Only two BTSs with the same synchronizati on zone can be synchronized SET in a BTSAISS(Manda synchronizati GBFDtory) on task. 118201 IP address of the slave clock server. The IP address must be a valid class A, B, or C address, and it cannot be a broadcast SET address or BTSIPCLKPARA network GBFD(Mandatory) address. 118606 No. of the location group under the BTS. The location group No. is unique for GBFDeach BTS. 510104
None
0~100
per cent
15
BSC69 15 00 None
Not involved
Not involved
O&M of BSC
0~65535
None None
None
RNC
None
Not involved
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h The parameter modification modificati has no impact on the on of the equipment. None The parameter modification has no impact on the None equipment. None
Transpor t Equipme nt
BSC6900 V900R011
SITESYNCZ ONE
BSC6900
SoftSynchronized Network
0~255
None
255 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
SLAVEIPAD DR
Clock over IP
IP Address Type
None
None
BTS
The value of this parameter cannot be the same as "Master Clock Read & Server IP Address". Write
Not involved
Not involved
None
Radio
SLAVELOC GRPNO
BSC6900
Multi-site Cell
0~35
None None
None
BTS
None
Not involved
Not involved
Not involved
Not involved
BSC6900 V900R011
Equipme nt
BSC6900
BSC6900
SLPTYPE
BSC6900
SLSMASK
BSC6900
CPU usage threshold for paging flow control over supplementar y services (SS) and location service (LCS). When the average CPU usage of sliding windows reaches or exceeds the threshold, SS and LCS paging flow control is triggered. This parameter is valid only SET when "Board FCCPUTHD(Opti Class" is onal) "XPU". CPU usage threshold for recovery from paging flow control over supplementar y services and location service. When the average CPU usage of sliding windows is lower than the threshold, SS and LCS paging flow control is stopped. This parameter is valid only SET when "Board FCCPUTHD(Opti Class" is onal) "XPU". Self-loop type. The precautions are as follows: 1. If the selfloop type is set to "E1SELFLO OP" and the BTS type is BTS3002C, BTS3001C, or BTS3001CP, the TMU type can be set to only "Active TMU/MMU/I OMU/DOMU" . If the BTS type is BTS3006C or BTS3002E, the TMU type cannot be set to "Active/Stand by TMU". 2. If the selfSTR loop type is TRANSPERFTS set to T(Mandatory) "IASUSELFL Signaling route load sharing. In the value, the number of 1s (represented by n) determines the maximum number (2) of routes for the load sharing. For example, B0000 indicates that up to one route is used for the load sharing, B0001 and B1000 indicate that up to two routes are used for the load sharing. The additional routes are not used for the load ADD sharing. The N7DPC(Optional AND ) operation
WRFD040100
Flow Control
30~100
per cent
None
80 Board
None
Not involved
Not involved
None
Equipme nt
WRFD040100
Flow Control
30~100
per cent
None
70 Board
None
Not involved
Not involved
None
Equipme nt
GBFD111207
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
None
None
Enumeration Type
B0000(B0000), B0001(B0001), B0010(B0010), B0011(B0011), B0100(B0100), B0101(B0101), B0110(B0110), B0111(B0111), B1000(B1000), B1001(B1001), B1010(B1010), B1011(B1011), B1100(B1100), B1101(B1101), B1110(B1110), B1111(B1111)
None B0000
B0000
SCCP
None
Not involved
Not involved
The modified paramete r takes effect after the The parameter modification BSC is has no impact on the reset. equipment. None
Transpor t
BSC6900
If no handshake message is received from the peer within the SET delay, the GBSCREDGRP( slave service GBFDOptional) is activated. 113725
1~600
300 None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page254of316
150682621.xls.ms_office
Security Level:
SM
StartType
BSC6900
Type of the start date. "WEEK" indicates that the start date is a weekday. "DATE" indicates that the start date is a month day. "DATEWEEK " indicates the start date is expressed by a combination of weekday and month MRFDday. 210301 Smog alarm switch MRFD210304
DATE(Input with date), WEEK(Input with week), DATEWEEK(Inp ut with date and DATE, WEEK, week) DATEWEEK CLOSE(Close), OPEN(Open)
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900
CLOSE, OPEN
None OPEN
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
SMONTH
Start month
BSC6900
SET TZ(Mandatory)
Month in which DST starts CPU usage threshold for paging flow control over the short message service (SMS). When the average CPU usage of sliding windows reaches or exceeds the threshold, SMS paging flow control is triggered. This parameter is valid only when "Board Class" is "XPU". CPU usage threshold for recovery from paging flow control over the short message service (SMS). When the average CPU usage of smooth windows is lower than the threshold, SMS paging flow control is stopped. This parameter is valid only when "Board Class" is "XPU". Number of CPU usage samples involved in the calculation of the average CPU usage in the sliding window Number of the slot
MRFD210301
Configuration Management
Enumeration Type
JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September) JAN, FEB, MAR, , OCT(October), APR, MAY, JUN, NOV(November), JUL, AUG, SEP, DEC(December) OCT, NOV, DEC
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
70 Board
None
Not involved
Not involved
None
Equipme nt
WRFD040100
Flow Control
30~100
per cent
None
60 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
SET FCCPUTHD(Opti onal) SET FCMSGQTHD(O ptional) SWP BRD(Mandatory) STR BKP(Mandatory) CMP BRDAREA(Optio nal) STR CPUUSAGETST (Mandatory) ULD RSTINFO(Mand atory) ADD BRD(Mandatory) SET CLK(Mandatory) SET XPUPORT(Mand atory) ADD XPUVLAN(Mand atory) SET MPUBIND(Mand atory) SET DPUBRDTYPE( Mandatory) SYN BRDAREA(Optio nal) CMP TBLDATA(Mand atory) SET DLD TCFILE(Mandat ory)
WRFD040100 MRFD210301
SN
Slot No.
BSC6900
Interval Type 2~2000 2~2000 0,2,4,6,8,10,12,1 0, 2, 4, 6, 8, 10, 12, 4,16,18,20,22,24 14, 16, 18, 20, 22, Interval Type ,26 24, 26
None None
10 None
The number of CPU usage sampling times is at least twice the size of "Fast judgement window".
Not involved
Not involved
None
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
SN
Slot No.
BSC6900
MRFD210301 MRFD210301
0~27
None None
None
None
None
Not involved
Not involved
None
SN
Slot No.
BSC6900
0~3, 8~27
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
SN
Slot No.
BSC6900
ADD MTP3LNK(Mand atory) ADD SCTPLNK(Mand atory) SPU slot No.. None It is valid when the node type is set to UNI_AAL2S WITCH. It is the slot number of the SAAL link of the AAL2 signaling ADD bearing the ADJNODE(Mand adjacent atory) node. None SPU slot No. ADD of controlling M3LNK(Mandato the M3UA ry) link. None SET PHBMAP(Manda tory) ADD ATERE1T1(Man datory) ADD AE1T1(Mandator y) Slot number ADD PBE1T1(Mandat ory) BLK AE1T1(Mandator y) Slot No..
None
0,2,4,8,10,12,14, 0, 2, 4, 8, 10, 12, 16,18,20,22,24,2 14, 16, 18, 20, 22, Interval Type 6 24, 26
None None
None
Not involved
Not involved
Not involved
None
Transpor t
SN
Slot No.
BSC6900
None
0,2,4,8,10,12,14, 0, 2, 4, 8, 10, 12, 16,18,20,22,24,2 14, 16, 18, 20, 22, Interval Type 6 24, 26
None None
None
When the value of "NODET" in "ADD ADJNODE" is set to IUB, and the value of "IsROOTNODE" in "ADD ADJNODE" is set to YES, or the value of "NODET" in "ADD ADJNODE" is set to Adjace UNI_AAL2SWITCH, this Read & nt node parameter is valid. Write
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
SN
BSC6900
None
0,2,4,8,10,12,14, 0, 2, 4, 8, 10, 12, 16,18,20,22,24,2 14, 16, 18, 20, 22, Interval Type 6 24, 26
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
SN
Slot No
BSC6900
None
None
0~5, 8~27
None None
None
E1/T1 link
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. 1. The block of Ater interface must be configure d. 2. If the BSC is configure d to the integrate d BMTC or A over IP is configure d, the configura tion does not support the operation . 3. If the block operation is applicabl e to only the ATERTS of the BM
None
Transpor t
SN
Slot No.
BSC6900
GBFD111203
O&M of BSC
0~27
None None
None
Not involved
Not involved
Not involved
Not involved
None
Transpor t
SN
BM Slot No
BSC6900
It is one key field of identifying the Ater timeslot and indicates the timeslot No. BLK of the Ater ATERE1T1(Man interface datory) timeslot.
None
None
0~5, 8~27
None None
None
E1/T1 link
None
Not involved
Not involved
Transpor t
6/9/2013
Page255of316
150682621.xls.ms_office
Security Level:
sn
Slot No.
BSC6900
Number of the slot where the alarm is generated Number of the slot where the alarm is generated
MRFD210304
Faulty Management
0~27
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
ADD OBJALMSHLD( Optional) SET E1T1LOP(Mand atory) LOP E1T1(Mandatory ) STR E1T1TST(Manda tory) SET OPTLOP(Manda tory) PING IP(Mandatory) TRC IPADDR(Mandat ory) SET QUEUEMAP(Ma ndatory) SET E1T1(Mandatory ) ADD TSCROSS(Mand atory) ADD DEVIP(Mandator y) ADD IPRT(Mandatory ) SET OPT(Mandatory) SWP ETHPORT(Mand atory) ADD ETHREDPORT( Mandatory) SET GCELLRACHCC LEV(Optional) ADD GCBSADDR(Ma ndatory) SET TCPLYVOICE(M andatory) SET TCPARA(Manda tory)
MRFD210304
Faulty Management
0~27
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
None
0~5, 8~27
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
SN
BSC6900
SN
Serial Number
BSC6900
Slot number for running this command None Delivery serial number of the RET MRFDantenna 210602 Number of the slot. The subrack number and slot number uniquely identify a board.
0,2,4,8,10,12,14, 0, 2, 4, 8, 10, 12, 16,18,20,22,24,2 14, 16, 18, 20, 22, Interval Type 6 24, 26
None None
None
None
None
Not involved
Not involved
None
String Type
None
1~16 characters
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
SN
Slot No.
BSC6900
MRFD210301
Configuration Management
0~27
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
Slot No. of the subsystem where the IurADD g common GIURGCONN(M connection is MRFDandatory) established 211402 SWP BTSRING(Optio nal) SWP BTSOMLLINK(O ptional) ADD TRXBIND2PHYB RD(Mandatory) SET BTSFMUABP(M andatory) SET BTSNFCBBP(Ma ndatory) SET BTSPMUBP(Ma ndatory) SET BTSAPMUBP(M andatory) SET BTSDATUBP(Ma ndatory) SET BTSDEMUBP(M andatory) SET BTSDFCUBP(M andatory) Number of SET the slot BTSDHEUBP(M where the andatory) BTS board is GBFDSET located 111202 ADD BTSBFD(Option al) ADD BTSIPRTBIND( Optional) Number of the slot where the BTS board is GBFDlocated 118609
{0~27}
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
O&M of BTS
0~23
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
SN
Slot No.
BSC6900
0~23
None
6 None
BTS
None
Not involved
Not involved
None
Equipme nt
SN
Slot No.
BSC6900
Slot number of the XPU ADD bound to the NSE(Mandatory) NSE. Slot No. of board to ADD which Pb PBSL(Mandatory signaling link ) belongs. ADD BTSSFPMODE( Optional) SET BTSFORBIDTS( Optional) SET BTSOMLTS(Opti onal) ADD BTSTOPCONFI G(Optional) SET BTSETHPORT( Optional) ADD BTSPPPLNK(Op tional) ADD BTSMPLNK(Opti onal) ADD BTSETHMA(Opti onal) ADD BTSETHLCMEP( Optional)
MRFD210301
Configuration Management
0,2,4,8,10,12,14, 0, 2, 4, 8, 10, 12, 16,18,20,22,24,2 14, 16, 18, 20, 22, Interval Type 6 24, 26
None None
None
Board
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Equipme nt
SN
Slot No.
BSC6900
GBFD111203
O&M of BSC
0~27
None None
None
Not involved
Not involved
Not involved
None
Transpor t
SN
BSC6900
GBFD111202
O&M of BTS
Interval Type 0~23 NOCOMB(No Combination), PBT(PBT), WBANDCOMB( Wideband Combination), DIVERSITY(Tran smit Diversity), DDIVERSITY(Dy namic Transmit Diversity), DPBT(DPBT), DTIC(Transmit Independency or Combination), NONE(none) SGL_ANTENNA( Single Feeder[1TX + 1RX]), SGLDOUBLE_A NTENNA(Single Feeder[1TX + 2RX]), DOUBLE_ANTE NNA(Double Feeder[2TX + 2RX]), DOUBLEFOUR_ ANTENNA(Doubl e Feeder[2TX + 4RX]), DOUBLESINGLE _ANTENNA(Dou ble Feeder[1TX + 1RX]), DOUBLEDOUBL E_ANTENNA(Do uble Feeder[1TX + 2RX])
0~23
None None
None
BTS
None
BTS
None
None
Radio
SNDMD
Send Mode
BSC6900
MRFD210301
Configuration Management
Enumeration Type
NOCOMB, PBT, WBANDCOMB, DIVERSITY, DDIVERSITY, DPBT, DTIC, NONE None None
None
TRX
None
Not involved
Not involved
None
Radio
BSC6900
Sending and SET receiving BTSRXUBP(Opti mode of the GBFDonal) DRRU board 111202
O&M of BTS
Enumeration Type
SGL_ANTENNA, SGLDOUBLE_ANTE NNA, DOUBLE_ANTENNA , DOUBLEFOUR_ANT ENNA, DOUBLESINGLE_A NTENNA, DOUBLEDOUBLE_A DOUBLE_AN NTENNA None TENNA None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page256of316
150682621.xls.ms_office
Security Level:
BSC6900
Sending and SET receiving BTSRXUBP(Opti mode of the onal) DRFU board
GBFD111202
O&M of BTS
Enumeration Type
SGL_ANTENNA( Single Feeder[1TX + 1RX]), SGLDOUBLE_A NTENNA(Single Feeder[1TX + 2RX]), DOUBLE_ANTE NNA(Double Feeder[2TX + 2RX]), DOUBLEFOUR_ ANTENNA(Doubl e Feeder[2TX + 4RX]), DOUBLESINGLE _ANTENNA(Dou ble Feeder[1TX + 1RX]), DOUBLEDOUBL E_ANTENNA(Do uble Feeder[1TX + 2RX]) SGL_ANTENNA( Single Feeder[1TX + 1RX]), SGLDOUBLE_A NTENNA(Single Feeder[1TX + 2RX]), DOUBLE_ANTE NNA(Double Feeder[2TX + 2RX]), DOUBLEFOUR_ ANTENNA(Doubl e Feeder[2TX + 4RX]), DOUBLESINGLE _ANTENNA(Dou ble Feeder[1TX + 1RX]), DOUBLEDOUBL E_ANTENNA(Do uble Feeder[1TX + 2RX]) SGL_ANTENNA( Single Feeder[1TX + 1RX]), SGLDOUBLE_A NTENNA(Single Feeder[1TX + 2RX]), DOUBLE_ANTE NNA(Double Feeder[2TX + 2RX]), DOUBLEFOUR_ ANTENNA(Doubl e Feeder[2TX + 4RX]), DOUBLESINGLE _ANTENNA(Dou ble Feeder[1TX + 1RX]), DOUBLEDOUBL E_ANTENNA(Do uble Feeder[1TX + 2RX]) SGL_ANTENNA( Single Feeder[1TX + 1RX]), DOUBLESINGLE _ANTENNA(Dou ble Feeder[1TX + 1RX]), DOUBLEDOUBL E_ANTENNA(Do uble Feeder[1TX + 2RX])
SGL_ANTENNA, SGLDOUBLE_ANTE NNA, DOUBLE_ANTENNA , DOUBLEFOUR_ANT ENNA, DOUBLESINGLE_A NTENNA, DOUBLEDOUBLE_A DOUBLE_AN NTENNA None TENNA None
BTS
None
Not involved
Not involved
None
Equipme nt
Sending and receiving SET mode of the BTSRXUBP(Opti MRRU/GRR onal) U board
GBFD111202
O&M of BTS
Enumeration Type
SGL_ANTENNA, SGLDOUBLE_ANTE NNA, DOUBLE_ANTENNA , DOUBLEFOUR_ANT ENNA, DOUBLESINGLE_A NTENNA, DOUBLEDOUBLE_A DOUBLE_AN NTENNA None TENNA None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Sending and receiving SET mode of the BTSRXUBP(Opti MRFU/GRFU GBFDonal) board 111202
O&M of BTS
Enumeration Type
SGL_ANTENNA, SGLDOUBLE_ANTE NNA, DOUBLE_ANTENNA , DOUBLEFOUR_ANT ENNA, DOUBLESINGLE_A NTENNA, DOUBLEDOUBLE_A DOUBLE_AN NTENNA None TENNA None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
SP
Sync Period[min]
BSC6900
SPACE
BSC6900
Sending and receiving SET mode of the BTSRXUBP(Opti BTS3900E onal) board Synchronizati SET on period of SNTPCLTPARA( the SNTP Mandatory) client service SET LOGCFG(Option al) Log File Size
GBFD111202
O&M of BTS
Enumeration Type
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
GBFD111203 MRFD210304
1~60
min
None
None
RNC
None
Not involved
Not involved
None
Equipme nt Equipme nt
{1~30}
None None
None
RNC
None
Not involved
Not involved
None
BSC6900 V900R011
SPC
BSC6900
ADD OPC(Optional)
As a whole number, the OSP code can be expressed by a decimal digit or a hexadecimal digit. If the OSP code is expressed by a hexadecimal digit, H' is added before the number. None
None
SPCBITS
BSC6900
None
None
None
SCCP
When the value of "SPDF" is set to WNF, this parameter is valid. This parameter depends on network planning.
BSC6900
None
SCCP
BSC6900
The services are interrupted until the signaling point is available. The services are interrupted until the signaling point is available.
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
SPCDNF
SPCIC
Start PCIC
BSC6900
Divided OSP code.Input ADD format is 8-8OPC(Optional) 8 None Start CIC of ADD the E1/T1 of PBE1T1(Mandat the Pb GBFDory) interface. 111203 ADD OPC(Optional) ADD N7DPC(Optional ) Data format of the specified signaling point. This parameter is used for load control. It determines whether the users of special access class are allowed to access the network. Value 1 indicates that access is not allowed. Value 0 indicates that access is allowed. The value of this parameter consists of seven bits. Each bit determines whether to enable the one-way Boolean alarm. "0" indicates that the one-way Boolean alarm is enabled, and "1" indicates that the oneway Boolean alarm is disabled. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another mode.
None
String Type
None
1~11 characters
None None
None
SCCP
Not involved
Not involved
Not involved
None
Transpor t
O&M of BSC
0~65535
None None
None
PBE1T 1 None
Not involved
Not involved
None
Equipme nt
SPDF
BSC6900
None
None
Enumeration Type
None WNF
WNF
SCCP
When the value of "SPDF" in "ADD N7DPC" is set to WNF, this Read & parameter is valid. Write
Not involved
Not involved
None
Transpor t
SPECACC
BSC6900
GBFD111003
None None
None
Cell
None
Not involved
Not involved
None
This parameter can be used to control network load based on the MS access classes, thus preventing some MSs from The parameter modification accessing the network. It is has no impact on the recommended that this parameter be not equipment. used.
Radio
BSC6900
MRFD210304
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page257of316
150682621.xls.ms_office
Security Level:
BSC6900
The value of this parameter consists of five bits. Each bit determines whether the one-way Boolean alarm is triggered by low level or high level. "0" indicates that the alarm is triggered by high level, and "1" indicates that the alarm is triggered by low level. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter MRFDin another 210304
Faulty Management
None None
None
BTS
None
Not involved
Not involved
Whether to contain the information element of Speech_Ver in the Assignment Complete message
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None YES
YES
MSC
None
Not involved
Not involved
Whether to contain the information element of Speech_Ver in the Handover Perform message
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None YES
YES
MSC
None
Not involved
Not involved
BSC6900
Whether to contain the information element of Speech_Ver in the HO_REQ_A GBFDCK message 111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None YES
YES
MSC
None
Not involved
Not involved
None This paramete r should be set on the basis of the negotiati on with the MSC at the peer end so that the MSC can process the assignme nt complete message properly. In the assignme nt request, if the speech/d ata indicator in the channel type is data, the assignme This paramete r should be set on the basis of the negotiati on with the MSC at the peer end so that the MSC can process the Handover Perform message properly. For SDCCH handover s, the Handover Perform message does not carry speech_v er even if this paramete r is set to This paramete r should be set on the basis of the negotiati on with the MSC at the peer end so that the MSC can process the HO REQ ACK message properly. This paramete r should be set on the basis of the negotiati on with the MSC at the peer end. This paramete r is supporte d only by the following types of BTSs: BTS3012 , BTS3006 C, BTS3012 AE, BTS3012 II, and BTS3002 E. This paramete r is supporte d only by the following types of BTSs: BTS3012 , BTS3006 C, BTS3012 AE, BTS3012 II, and BTS3002 E.
Equipme nt
Radio
Radio
Radio
BSC6900
Whether to contain the information element of Speech Ver in the HO_RQD message
GBFD111804
Enumeration Type
NO(No), YES(Yes)
NO, YES
None NO
NO
MSC
None
Not involved
Not involved
Radio
BSC6900
Speech version mode that the BTS uses for the VGCS call number in the timeslot in SET the TRX in BTSCHNFALLBA fallback GBFDCK(Mandatory) mode 510309
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
Radio
BSC6900
Speech version mode that the BTS uses for the VGCS call number in the timeslot in SET the TRX in BTSCHNFALLBA fallback GBFDCK(Mandatory) mode 510309 Speech version configured on the TRX timeslot when the BTS works in fallback mode. When "CHNTYPE" of the TRX timeslot is set to "FULLTCH", value 0 of this parameter indicates FR and value 1 indicates EFR; when "CHNTYPE" of the TRX timeslot is set to "HALFRCH", SET this BTSCHNFALLBA parameter is GBFDCK(Mandatory) invalid. 510309
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
Radio
BSC6900
Enumeration Type
FR(FR), EFR(EFR)
FR, EFR
None None
None
BTS
None
Not involved
Not involved
This paramete r is supporte d only by the following types of BTSs: BTS3012 , BTS3006 C, BTS3012 AE, BTS3012 II, and The parameter modification BTS3002 has no impact on the E. equipment. None
Radio
6/9/2013
Page258of316
150682621.xls.ms_office
Security Level:
SPEEDPUNI SH
BSC6900
SPEEDPUNI SHT
BSC6900
BSC6900
Level value of the penalty that is performed on the neighboring cells of the cell where a fast-moving MS is located. The neighboring cells must be located at the Macro, Micro, or Pico layer SET other than GCELLHOAD(O the Umbrella ptional) layer. Period in which penalty is performed on the neighboring cells of the cell where a fast-moving MS is located. The neighboring cells must be located at the Macro, Micro, or Pico layer SET but not the GCELLHOAD(O Umbrella ptional) layer. Whether to support SPLIT_PG_ CYCLE on CCCH. The parameter SPLIT_PG_ CYCLE is used to define the DRX period. You can specify whether the paging group based on SPLIT_PG_ CYCLE is supported on CCCH for the BTS and the MS. Yes: the paging group based on SPLIT_PG_ CYCLE is supported on CCCH. No: the paging group based on SET SPLIT_PG_ GCELLPSBASE( CYCLE is not Optional) supported on
GBFD110601 GBFD510501
0~63
dB
None
30 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, the handover to micro cells becomes difficult, and congestion may occur in macro cells. The parameter modification If this parameter is set to a smaller value, has no impact on the more handovers may be performed, thus Versions earlier than equipment. the voice quality is decreased. BSC6900 V900R011
Radio
GBFD110601 GBFD510501
0~255
None
40 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, the handover to micro cells becomes difficult, and congestion may occur in macro cells. The parameter modification If this parameter is set to a smaller value, has no impact on the more handovers may be performed, thus Versions earlier than equipment. the voice quality is decreased. BSC6900 V900R011
Radio
GBFD114802
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
SpprtCB
BSC6900
GBFD113601
NOTSPPRTBC(N otSupport CB), SPPRTSTANDA RD(SupportStan dard CB), SPPRTSIMPLE( NOTSPPRTBC, SupportSimple SPPRTSTANDARD, CB) SPPRTSIMPLE
BSC69 00 None
Not involved
Not involved
None
Radio
BSC6900
Whether to support the common bidirectional measurement ADD procedure on GNRNC(Optional the Iur-g MRFD) interface. 211402 Whether to support the bidirectional information exchange ADD procedure on GNRNC(Optional the Iur-g MRFD) interface. 211402 Whether to support In Inter-RAT Inter-cell PS Handover. The MS in the UMTS cell can be handed over to the BSC local cell SET through PS GCELLGPRS(O handover ptional) algorithm.
Enumeration Type
None NO
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
Enumeration Type
None NO
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
SPTINTERR ATINBSCPS HO
BSC6900
GBFD119502
PS Handover
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
Whether support Out Inter-RAT Inter-Cell PS Handover. The MS in the BSC local cell can be handed over to the UMTS SET cell through GCELLGPRS(O PS handover GBFDptional) algorithm 119502 Whether the function of Network Assisted Cell Change (NACC) resource guarantee is allowed. In NC2 or NACC cell reselection, if this parameter is set to YES, dynamic channels are SET requested in BSCPSSOFTPA the target RA(Optional) cell. Whether to enable the layer 3 check mechanism on the LAPD links. If the PCU_BSC_L APD_CHECK _ACK message cannot be received on one Pb link, the Pb link is in single pass mode. Send another two PCU_BSC_L APD_CHECK _ACK messages. If the PCU_BSC_L APD_CHECK _ACK message is still not received on the Pb link, set the Pb link to fault SET state and OTHSOFTPARA report the (Optional) ONE PBSL Whether to enable the enhanced resource check on the Pb interface. The introduction of enhanced resource check is to improve the efficiency of resource checking and define the dependencie s of resource status. The external PCU initiates the enhanced resource check. The resources to be checked, consisting of the cell resources, channel resources, SET and PCIC OTHSOFTPARA resources, (Optional) are provided
PS Handover
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
GBFD116301
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
NO
BSC
None
Not involved
Not involved
None
Radio
BSC6900
GBFD114101
GPRS
Enumeration Type
NO, YES
NO, YES
None None
NO
This parameter is valid only when "TYPE" in BSC69 "SET BSCPCUTYPE" is 00 set to OUTER.
Not involved
Not involved
None
Transpor t
BSC6900
GBFD114101
GPRS
Enumeration Type
NO, YES
NO, YES
None None
NO
This parameter is valid only when "TYPE" in BSC69 "SET BSCPCUTYPE" is 00 set to OUTER.
Not involved
Not involved
None
Equipme nt
6/9/2013
Page259of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether to enable the single pass check function on the Pb links between the BSC and the external PCU. When the Pb link is in single pass mode, a correspondin g alarm is reported to the maintenance terminal, and the Pb link is set to broken link state or SET the priority of OTHSOFTPARA the Pb link is GBFD(Optional) lowered. 114101 Whether to enable the PCIC check function on the Pb links between the BSC and the external PCU. When the configuration of the PCIC of the BSC is inconsistent with that of the external PCU, a correspondin g alarm is reported to the maintenance terminal, the Pb interface circuit with inconsistent configuration s at two ends are blocked, and the SET priority of the OTHSOFTPARA Pb link is GBFD(Optional) lowered. 114101 SET Whether to BSCBASIC(Opti support RAN GBFDonal) Sharing 118701 Cell supports reduced latency capability. This parameter is used to reduce the latency during the transmission, thus improving the user experience SET for GCELLGPRS(O conversation ptional) al services. SET Whether to BTSRXUBP(Opti support onal) RanSharing Whether the SET FTP client FTPSCLT(Optio supports the nal) state firewall
GPRS
Enumeration Type
NO, YES
NO, YES
None None
NO
This parameter is valid only when "TYPE" in BSC69 "SET BSCPCUTYPE" is 00 set to OUTER.
Not involved
Not involved
None
Equipme nt
BSC6900
GPRS
NO, YES
None None
NO
This parameter is valid only when "TYPE" in BSC69 "SET BSCPCUTYPE" is 00 set to OUTER. BSC69 00 None
Not involved
Not involved
None
BSC6900
RAN Sharing
NO, YES
None None
NO
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
BSC6900
GBFD510805 GBFD118701
Latency Reduction
None None
None
Cell
This parameter is valid only when "EDGE" is set Read & to Support. Write Read & Write
Cell
None
BSC6900
RAN Sharing
NO, YES
None NO
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio Equipme nt
BSC6900
GBFD111203
O&M of BSC
Enumeration Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
SPUSHAREI Offset of current NOFFSETTH CPU load and D target CPU load
BSC6900
Difference between CPU usage of the current and target SPUs. If the difference between CPU usage of the current and target SPUs is greater than the value of this parameter, load sharing is triggered between the current and target SPUs. This parameter is valid only SET when "Board FCCPUTHD(Opti Class" is WRFDonal) "XPU". 040100 Load sharing threshold of the current SPU. When the CPU usage of an SPU exceeds the threshold, load sharing is configurable. This parameter is valid only SET when "Board FCCPUTHD(Opti Class" is WRFDonal) "XPU". 040100 ADD OPC(Mandatory) ADD N7DPC(Mandato ry) ADD To identify an M3LE(Mandator OSP y) uniquely. None Whether to enable the BTS to identify an object in the BTS in normalized mode, for example, to identify a board by the slot No., subrack No., and cabinet No. and to identify a transmission port by the ADD port No. in a GBFDBTS(Mandatory) board 111202 Whether to support the SRAN mode that is used to locate BTS objects, for example, locating a board by the cabinet No., subrack No., and slot No., and locating a transmission ADD port by the BTSCABINET(O inter-board GBFDptional) number. 111202
Flow Control
1~100
per cent
None
5 Board
None
Not involved
Not involved
None
Equipme nt
SPUSHARE OUTTHD
Flow Control
1~100
per cent
None
50 Board
None
Not involved
Not involved
None
Equipme nt
SPX
OSP index
BSC6900
None
0~4
None None
None
SCCP
None
Not involved
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
Enumeration Type
None None
None
BTS
None
BTS
None
BSC6900 V900R011
Equipme nt
BSC6900
O&M of BTS
Enumeration Type
SUPPORT~1||( SRAN)$$(Su pport SRAN)** NOT_SUPPORT( Support SRAN)** NOT_SUPPORT ~0||()$$(N SUPPORT, ot Support) NOT_SUPPORT
None
BTS
None
BTS
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page260of316
150682621.xls.ms_office
Security Level:
SRBDL
None
None
0~100
per cent
15
BSC69 15 00 None
Not involved
Not involved
BSC6900
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NOCONFIG; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NOCONFIG.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
SRBUL
BSC6900
WCDMA ADD signaling TRMFACTOR(O service uplink ptional) factor A cell Index must be ADD unique in one G2GNCELL(Man BSC. It is datory) used to ADD uniquely GIBCAPNCGRP identify a (Mandatory) cell. ADD G2GNCELL(Man datory) ADD GIBCAPNCGRP Name of a (Mandatory) cell.
None
None
0~100
per cent
15
BSC69 15 00 None
Not involved
Not involved
The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the
Transpor t
Transpor t
Transpor t
Transpor t
GBFD110601 GBFD510501
0~2047
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
MRFD210301
Configuration Management
String Type
None
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
SRC3GNCEL LID Source Cell Index SRC3GNCEL LNAME Source Cell Name
BSC6900
BSC6900
SRCCI
Source Cell CI
BSC6900
A source cell index must be unique in one BSC. It is used to uniquely identify a source cell. The value of this ADD parameter G3GNCELL(Man ranges from MRFDdatory) 0 to 2047. 210301 ADD G3GNCELL(Man Name of a MRFDdatory) source cell. 210301 ADD G2GNCELL(Man Source cell MRFDdatory) ID. 210301 The batch file to be executed: The content of the batch file consists of service commands to be executed in batches. The source file is located in the FTP subdirectory of the OMU installation directory, and you should not add the path when entering the name. The characters (@, #, !, %, ^, &, *, /, ., [, ], \, :, ?, ', ", <, >, and |) cannot appear in the GBFDfile name. 111203
0~2047
None None
None
Cell
None
Not involved
Not involved
None
String Type
None
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
0~65535
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
Radio
SRCF
BSC6900
O&M of BSC
String Type
None
1~100 characters
None None
None
RNC
None
Not involved
Not involved
SRCGRD
BSC6900
ADD CLKSRC(Manda tory) SET CLKMODE(Man Priority of the MRFDdatory) clock source. 210502 Whether the existing handover algorithm of the source cell to use GBFDADD HO Algorithm 110601 G2GNCELL(Opti I or HO GBFDonal) Algorithm II. 510501
BSC/RNC Clock
1~4
None None
None
None
None
Not involved
Not involved
Equipme nt
Equipme nt
SRCHOCTR LSWITCH
BSC6900
Enumeration Type
HOALGORITHM 1(Handover algorithm I), HOALGORITHM 2(Handover HOALGORITHM1, algorithm II) HOALGORITHM2
None None
None
Cell
The value of this parameter must be the same as that of "HOCTRLSWITCH" in Read & "SET GCELLHOBASIC". Write
Not involved
Not involved
None
Radio
6/9/2013
Page261of316
150682621.xls.ms_office
Security Level:
SRCIP
GBFD118609
IP Address Type
None
None
Not involved
Not involved
Not involved
None
Not involved
None
Transpor t
SRCLAC
BSC6900
Local area ADD code (LAC) G2GNCELL(Man of the source MRFDdatory) cell. 210301 Mobile ADD country code G2GNCELL(Man (MCC) of the MRFDdatory) source cell. 210301 PING MAC(Mandatory ) TRC MAC(Mandatory ) Identifies a maintenance point in the maintenance group
Configuration Management
1~65533, 65535
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
SRCMCC
BSC6900
Configuration Management
String Type
None
1~3 characters
None None
None
Cell
None
Not involved
Not involved
None
Radio
SRCMEPID
MEP ID
BSC6900
None
None
1~400
None None
None
Not involved
Not involved
Not involved
None
Transpor t
SRCMNC
BSC6900
Mobile ADD network code G2GNCELL(Man (MNC) of the MRFDdatory) source cell. 210301
Configuration Management
String Type
None
1~3 characters
None None
None
Cell
None
Not involved
Not involved
None
Radio
SRCPORTN O
BSC6900
None
None
SRCT
BSC6900
BSC/RNC Clock
Interval Type 0~335 BITS12MHZ(2MHZ Building Integrated Timing Supply system 1), BITS22MHZ(2MHZ Building Integrated Timing Supply system 2), BITS12MBPS(2MBPS Building Integrated Timing Supply system 1), BITS22MBPS(2MBPS Building Integrated Timing Supply system 2), 8KHZ(8KHZ), GPS(Globe Positioning System), LINE1_8KHZ(8K HZ line1), LINE2_8KHZ(8K HZ line2), BITS1T1BPS(T1BPS Building Integrated Timing Supply system Enumeration 1), BITS2Type T1BPS(T1BPS TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
0~335
None None
None
E1/T1 port
None
Not involved
Not involved
Not involved
None
Transpor t
BITS1-2MHZ, BITS22MHZ, BITS12MBPS, BITS22MBPS, GPS, 8KHZ, LINE1_8KHZ, LINE2_8KHZ, BITS1T1BPS, BITS2T1BPS None None
None
None
None
Not involved
Not involved
Clock sources and priorities are in one-toone mapping. Each backplan e board 8K clock has only The parameter modification one clock has no impact on the source. equipment. None
Equipme nt
SRCTSMAS K
BSC6900
ADD Source TSCROSS(Mand timeslot atory) mask ADD SUBRACK(Mand atory) SET Number of CLK(Mandatory) the subrack
None
None
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
E1/T1 port
None
Not involved
Not involved
None
Transpor t
SRN
Subrack No.
BSC6900
MRFD210301
Configuration Management
1~11
None None
None
None
None
Not involved
Not involved
Not involved
None
Equipme nt
SRN
Subrack No.
BSC6900
ADD MTP3LNK(Mand atory) ADD ADJNODE(Mand atory) ADD SCTPLNK(Mand atory) ADD RSCGRP(Manda tory) SET PHBMAP(Manda tory) ADD ATERE1T1(Man datory) ADD PBE1T1(Mandat ory) ADD AE1T1(Mandator y) BLK AE1T1(Mandator y) ADD ABISLOADSHA RE(Mandatory) Subrack No.. None SPU subrack No. of ADD controlling M3LNK(Mandato the M3UA ry) signaling link. None
None
0~11
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. 1. The block of Ater interface must be configure d. 2. If the BSC is configure d to the integrate d BMTC or A over IP is configure d, the configura tion does not support the operation . 3. If the block operation is applicabl e to only the ATERTS of the BM
None
Transpor t
SRN
BSC6900
None
0~11
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
Not involved
None
Transpor t
SRN
BM Subrack No
BSC6900
It is one key field of identifying the Ater timeslot and indicates the subrack No. BLK of the Ater ATERE1T1(Man interface datory) timeslot. COL LOG(Optional) EXP ALMLOG(Option al) STA ALMLOG(Option al) ADD OBJALMSHLD( Mandatory) Number of the subrack.
None
None
0~11
None None
None
E1/T1 link
None
Not involved
Not involved
SRN
Subrack No.
BSC6900
None
None
0~11
None None
None
BSC69 00 None
Not Invovled
Not Invovled
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification does not impact the equipment. None
Transpor t Equipme nt
srn
Subrack No.
BSC6900
MRFD210304
Faulty Management
0~11
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
SRN
Subrack No.
BSC6900
ADD ETHMD(Mandat ory) ADD ETHTRK(Mandat ory) ADD ETHTRKLNK(Ma ndatory) ADD ETHTRKIP(Man datory) The subrack STR number for ETHMIRRORPO running this RT(Mandatory) command ADD GCBSADDR(Ma ndatory) SET TCPLYVOICE(M andatory) SET TCPARA(Manda tory)
None
None
0~11
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
SRN
Subrack No.
BSC6900
MRFD210301
Configuration Management
0~11
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
SRN
Subrack No.
BSC6900
Subrack No. of the subsystem where the IurADD g common GIURGCONN(M connection is MRFDandatory) established 211402
{0~11}
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
6/9/2013
Page262of316
150682621.xls.ms_office
Security Level:
SRN
Subrack No.
BSC6900
SWP BTSRING(Optio nal) SWP BTSOMLLINK(O ptional) ADD TRXBIND2PHYB RD(Mandatory) SET BTSFMUABP(M andatory) SET BTSNFCBBP(Ma ndatory) SET BTSPMUBP(Ma ndatory) SET BTSAPMUBP(M andatory) SET BTSDATUBP(Ma ndatory) SET BTSDEMUBP(M andatory) SET BTSDFCUBP(M andatory) SET BTSDHEUBP(M andatory) SET ADD BTSBFD(Option al) ADD BTSIPRTBIND( Optional)
Number of the subrack where the BTS board is GBFDlocated 111202 Number of the subrack where the BTS board is GBFDlocated 118609
O&M of BTS
0~254
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
SRN
Subrack No.
BSC6900
0~254
None
0 None
BTS
None
Not involved
Not involved
None
Equipme nt
SRN
Subrack No.
BSC6900
Subrack number of the XPU ADD bound to the NSE(Mandatory) NSE. Subrack No. of board to ADD which Pb PBSL(Mandatory signaling link ) belongs. ADD BTSSFPMODE( Optional) SET BTSFORBIDTS( Optional) SET BTSOMLTS(Opti onal) ADD BTSTOPCONFI G(Optional) SET BTSETHPORT( Optional) ADD BTSPPPLNK(Op tional) ADD BTSMPLNK(Opti onal) ADD BTSETHMA(Opti onal) ADD BTSETHLCMEP( Optional)
MRFD210301
Configuration Management
0~11
None None
None
BSC
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Equipme nt
SRN
Subrack No.
BSC6900
GBFD111203
O&M of BSC
0~11
None None
None
BSC
None
Not involved
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
SRN
BSC6900
GBFD111202
O&M of BTS
0~254
None None
None
BTS
None
BTS
None This paramete r can be modified only when the BTS is deactivat ed. 1. The comman d is used for the configura tion when the TDM resource s exist between two subracks . 2. Each subrack must be the BM subrack or TC subrack. 1. The comman d is used for the configura tion when the TDM resource s exist between two subracks . 2. Each subrack must be the BM subrack or TC subrack.
None
Radio
SRN
Subrack No.
BSC6900
Subrack number of the BSC board that is connected to GBFDthe BTS 111202
O&M of BTS
0~11
None None
None
BTS
None
BTS
None
Radio
SRN1
Subrack 1 No
BSC6900
Number of the subrack of one end of the interADD subrack SRCONPATH(M connection GBFDandatory) channel 111203
O&M of BSC
0~11
None None
None
Equipme nt
SRN2
Subrack 2 No
BSC6900
SRName
Subrack name
BSC6900
SRNO
Tributary No.
BSC6900
Number of the subrack of the other end of the inter-subrack connection GBFDchannel 111203 Name of the subrack to MRFDbe added 210301 Number of the tributary GBFD111202
0~11
None None
None
BSC69 00 None
String Type
None
1~249 characters
None None
None
None
None
Not involved
Not involved
None
O&M of BTS
0~5
None None
None
None
None
Not involved
Not involved
SRT
Subrack type
BSC6900
srtord
Sort Order
BSC6900
MRFD210502 MRFD210304
None None
None
None
None
Not involved
DES, ASC
DES, ASC
None DES
None
RNC
None
Not involved
SRVLW
BSC6900
Traffic local weight over the local NSVL. When this parameter is set to a larger value, the NS is more likely to select this IP point according to the load sharing function of the NSVC link of the IP network if the ADD NS sends a NSVLLOCAL(Op data GBFDtional) message. 118603
Gb over IP
0~255
None
100
100 NSE
None
NSE
None If the interface board clock source of the MPS/TC S subrack is set, you can set the 8 kHz output clock source. For the MPS and TCS, you can set the backplan e board 8K output clock as the clock source of the interface board. For the EPS, you The parameter modification cannot has no impact on the Not involved perform equipment. None The parameter modification has no impact on the Not involved None equipment. None The ratio of Gb interface signalling message s sent through local NSVLs is affected when this paramete r is modified. When this NSVL is the last NSVL of the normal state in the NSE, if "SRVLW" is set to 0, all the packet services of the local Services are interrupted NSE are The parameter modification until "SRVLW" is not set to interrupte has no impact on the 0. d. equipment. None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
BSC6900 V900R011
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
Equipme nt
6/9/2013
Page263of316
150682621.xls.ms_office
Security Level:
SRVLW
BSC6900
Traffic local weight over the remote NSVL. When this parameter is set to a larger value, the NS is more likely to select this IP point according to the load sharing function of the NSVC link of the IP network if the NS sends a data GBFDmessage. 118603
Gb over IP
0~255
None
100
100 NSE
None
Not involved
Not involved
None
Equipme nt
BSC6900
SRVTYPE
Service Type
BSC6900
The parameter specifies which type of service TRXs should be preferentially SET processed BTSPSUFP(Opti when the onal) PSU is faulty. Service type of the IP interface board. The service type can be CS speech, CS data, PS high ADD priority, or BTSABISMUXFL PS low OW(Mandatory) priority. After a handovr due to bad quality is successful, the penalty on the original serving cell is performed within the "Penalty Time after BQ HO": the receive level of the original serving cell is decreased by "Penalty Level after BQ HO", to SET prevent pingGCELLHOFITPE pong N(Optional) handovers. CPU usage SET alarm CPUTHD(Option clearance al) threshold CPU usage alarm threshold. When the CPU usage exceeds the threshold, a CPU usage alarm is reported. "CPU occupancy alarm clearance threshold" is smaller than "CPU SET occupancy CPUTHD(Option alarm al) threshold".
GBFD111202
O&M of BTS
Enumeration Type
GSM_PRIO None R
None
BTS
None
Not involved
Not involved
None
Equipme nt
GBFD118605
IP QOS
Enumeration Type
CSVOICE(CS Voice), CSDATA(CS Data), PSHIGHPRI(PS High PRI), PSLOWPRI(PS Low PRI)
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
SSBQPUNIS Penalty Level after H BQ HO BSC6900 SSCPUAVEU CPU occupancy SAGEALMT alarm clearance HD threshold
GBFD110601 GBFD510501
0~63
dB
None
63 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, it is difficult for the MS to be handed over to the original cell, thus leading to call drop when there is no suitable neighboring cell. If this parameter is set to a smaller The parameter modification value, the MS is likely to be handed over has no impact on the to the original cell again, thus leading to Versions earlier than equipment. ping-pong handovers. BSC6900 V900R011 The parameter modification has no impact on the equipment. None
Radio
BSC6900
MRFD210304
Faulty Management
20~99
per cent
None
75 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
MRFD210304
Faulty Management
30~100
per cent
None
85 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
DSP usage alarm clearance threshold. When the DSP usage is lower than the threshold, SET the DSP CPUTHD(Option usage alarm MRFDal) is cleared. 210304 DSP usage alarm threshold. When the DSP usage exceeds the threshold, a DSP usage alarm is reported. "DSP occupancy alarm clearance threshold" is smaller than "DSP SET occupancy CPUTHD(Option alarm al) threshold".
Faulty Management
20~99
per cent
None
80 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
MRFD210304
Faulty Management
30~100
per cent
None
80 Board
None
Not involved
Not involved
None
Equipme nt
SSLENSD
BSC6900
When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating environment for the sake of accuracy. This parameter specifies the number of successive measurement reports that are used to determine the signal GBFDstrength on 110601 traffic/data GBFDchannels. 510501 When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating environment for the sake of accuracy. The parameter specifies the number of successive measurement reports that are used to determine the signal GBFDstrength on 110601 signaling GBFDchannel. 510501
ms
None
6 Cell
None
Not involved
Not involved
None
Radio
SSLENSI
BSC6900
ms
None
2 Cell
None
Not involved
Not involved
None
Radio
SSN
Subsystem No.
BSC6900
STR BKP(Optional) STR CPUUSAGETST (Mandatory) ULD RSTINFO(Mand atory) ADD XPUVLAN(Mand atory) CMP Number of TBLDATA(Mand the atory) subsystem
MRFD210301
Configuration Management
0~7
None None
None
None
None
Not involved
Not involved
None
Equipme nt
SSN
Subsystem No.
BSC6900
No. of the subsystem where the IurADD g common GIURGCONN(M connection is MRFDandatory) established 211402
{0~7}
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
6/9/2013
Page264of316
150682621.xls.ms_office
Security Level:
sssn
BSC6900
Start synchronizati EXP on number of ALMLOG(Option the alarm MRFDal) record 210304 After the time advancing handover is successful, the penalty on the original serving cell is performed within the "Penalty Time after TA HO": the receive level of the original serving cell is decreased by "Penalty Level after TA HO", to GBFDSET prevent ping- 110601 GCELLHOFITPE pong GBFDN(Optional) handovers. 510501 SET TZ(Mandatory) MRFD210301
Faulty Management
1~2147483646
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
SSTAPUNIS H
0~63
dB
None
63 Cell
None
Not involved
Not involved
None
ST
StartTime
BSC6900
ST
Start Time
BSC6900
ST
Start Time
BSC6900
ST
Start Time
BSC6900
Start of DST The operation time of the log record is posterior to this time. If this parameter is not specified, EXP the start time LOG(Optional) is not limited. If the time mode is set to "DAILY_T", "WEEKLY_T ", or "MONTHLY_ T", you ADD should set SUBTSK(Mandat this ory) parameter. The operation time of the log record is posterior to this time. If this parameter is not specified, COL the start time LOG(Optional) is not limited. Start time of the alarm record. By EXP default, the ALMLOG(Option start time is al) 00:00:00. Start time of the alarm record. By STA default, the ALMLOG(Option start time is al) 00:00:00.
None None
None
BSC69 00 None
Not involved
Not involved
None
If this parameter is set to a greater value, it is difficult for the MS to be handed over to the original cell, thus leading to call drop when there is no suitable neighboring cell. If this parameter is set to a smaller The parameter modification value, the MS is likely to be handed over has no impact on the to the original cell again, thus leading to Versions earlier than equipment. ping-pong handovers. BSC6900 V900R011 The parameter modification has no impact on the Versions earlier than equipment. None BSC6900 V900R011
Radio Equipme nt
GBFD111203 MRFD210305
Compound Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
GBFD111203
O&M of BSC
Compound Type
hour, min
00:00~23:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
GBFD111203 MRFD210305
Compound Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
st
Start Time
BSC6900
MRFD210304
Faulty Management
Compound Type
00:00:00~23:59:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
st
Start Time
BSC6900
MRFD210304
Faulty Management
Compound Type
00:00:00~23:59:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
ST
Start time
BSC6900
A key parameter that indicates the date and time when the BSC broadcasts cell GBFDmessages 113602
Compound Type
None None
None
Cell
None
Not involved
Not involved
None
Radio
startaid
Start Alarm ID
BSC6900
EXP ALMLOG(Option al) STA Start number ALMLOG(Option of the alarm MRFDal) record 210304
Faulty Management
1~65535
None None
None
RNC
None
Not involved
Not involved
BSC6900
Whether to preferentially use the variable bitmap code when encoding the FH frequency in the assignment or handover GBFDcommand 113701 This parameter indicates whether the arrival of channel request messages is controlled.
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None In principle, you should not configure the frequenci es on the P frequenc y band and on the E frequenc y band in one MA group. If the frequenci es on the P frequenc y band and on the E frequenc y band are configure d in one MA The parameter modification group, has no impact on the some equipment. None
Equipme nt
Radio
GBFD111705
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
STARTCIC
Start CIC
BSC6900
It indicates the start CIC of the A interface CIC segment. When operation mode is set to OPC index, DPC group index, BSC ID, or BLK CIC, the ACIC(Mandatory parameter is GBFD) mandatory. 111803 It indicates the start CIC of the Pb interface CIC segment. 2. If the search object mode is set to search by the specified BLK range, the PBCIC(Mandator parameter is GBFDy) mandatory. 111203 Start date of a period during which the dynamic shutdown of ADD a TRX power BSCDSTPADAT amplifier is GBFDE(Mandatory) disabled. 111602 When the environment temperature reaches the specified value of this parameter, the heater is started. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDHEUBP(Op in another GBFDtional) mode. 111202
0~65535
None None
None
E1/T1 link
When the value of "OPMODE" of "BLK ACIC" is BYCICRANGE, the value of STARTTS Read & needs to be set. Write
Not involved
Not involved
The parameter modification has no impact on the None equipment. None 1. The block of A interface must be configure d. 2. If A over IP is configure d, the configura tion does not support the The parameter modification operation has no impact on the . equipment. None
Equipme nt
Equipme nt
STARTCIC
Start CIC
BSC6900
O&M of BSC
0~65535
None None
None
None
None
Not involved
Not involved
None
Transpor t
1~31
None None
None
The following condition must be met: the value of "EndDayDSTPA" is greater than that of "StartDayDSTPA" when "EndMonthDSTPA" and BSC69 "StartMonthDSTPA" are Read & 00 set to a same value. Write
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
Interval Type -990~400 JAN(Jan.), FEB(Feb.), MAR(Mar.), APR(Apr.), MAY(May), JUN(Jun.), JUL(Jul.), AUG(Aug.), SEP(Sep), OCT(Oct.), NOV(Nov.), DEC(Dec)
-100 BTS
The value of this parameter must be smaller than "Heater Read & shutdown Temperature". Write
Not involved
Not involved
None
Equipme nt
Start month when the BSC disables the function of dynamic ADD shutdown of BSCDSTPADAT TRX power GBFDE(Mandatory) amplifier. 111602
Enumeration Type
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC
None None
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page265of316
150682621.xls.ms_office
Security Level:
BSC6900
This parameter indicates whether the arrival of paging messages are controlled.
GBFD111705
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Equipme nt
STARTPSRE SREQARRIV PS Resource REQ ALCTRL Arrival Control BSC6900 STARTSUBT Start Sub Timeslot S NO. BSC6900
This parameter indicates whether the arrival of PS resource SET request BSCFCPARA(O messages is ptional) controlled. SET Number of BTSFORBIDTS( the start subOptional) timeslot
GBFD111705 GBFD111202
NO, YES
None YES
YES
BSC69 00 None
Not involved
Not involved
None
O&M of BTS
0, 2, 4, 6
None None
None
BTS
None
BTS
BSC6900
Time for which the BTS waits to start the fallback function after the OML is interrupted. With this parameter, the BTS does not start the fallback function when SET the OML is BTSFALLBACK( interrupted GBFDOptional) transiently. 510309 Start time when the BSC start TRX power SET amplifier BSCDSTPA(Opti dynamically onal) every day.
60~600
None
240 BTS
Not involved
Not involved
None This paramete r is supporte d only by the following types of BTSs: BTS3012 , BTS3006 C, BTS3012 AE, BTS3012 II, and The parameter modification BTS3002 has no impact on the E. equipment. None
The parameter modification has no impact on the equipment. None The transport path should be re-established after the parameter modification. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt
Radio
Equipme nt
BSC6900
GBFD111602
Compound Type
00:00~23:59
None None
When "BSCDynSwitchTrxPAAll BSC69 ow" is set to YES, this Read & 0:00 00 parameter must be set. Write
Not involved
Not involved
STARTTS
Start TS
BSC6900
It indicates the start CIC BLK of the Ater ATERE1T1(Man interface CIC GBFDdatory) segment. 111801
8~255
None None
None
E1/T1 link
When the value of "OPMODE" of "BLK ATERE1T1" is BYCICRANGE, the value of STARTTS needs to be Read & set. Write
Not involved
Not involved
STARTTS
Start TS
BSC6900
STARTTS
STC
BSC6900
It indicates the start CIC of the A interface CIC segment. When Operation mode is set to subrack No., slot No., port No., or BLK CIC, the AE1T1(Mandator parameter is y) mandatory. SET Number of BTSFORBIDTS( the start Mandatory) timeslot Whether to enable the smart temperature control mechanism of the FMUA. Smart temperature control refers to the mechanism adopted by the FMUA to adjust the fan speed, and thus to regulate the temperature according to the environment temperature. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the SET correspondin BTSFMUABP(O g parameter ptional) in another
GBFD111803 GBFD111202
1~31, step:8
None None
None
E1/T1 link
When the value of "OPMODE" of "BLK AE1T1" is BYCICRANGE, the value of STARTTS needs to be Read & set. Write Read & Write
Not involved
Not involved
None 1. The block of Ater interface must be configure d. 2. If the BSC is configure d to the integrate d BMTC or A over IP is configure d, the configura tion does not support the operation . 3. If the block operation is applicabl e to only the ATERTS of the BM 1. The block of A interface must be configure d. 2. If the BSC is configure d to the integrate d BMTC or A over IP is configure d, the configura tion does not support the operation . 3. If the block operation is applicabl e to only the AE1T1 of the BM subrack.
Equipme nt
Transpor t
O&M of BTS
1~31
None None
None
BTS
None
BTS
None
The parameter modification has no impact on the equipment. None The transport path should be re-established after the parameter modification. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t
Radio
GBFD111202
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
STC
BSC6900
Whether to enable the smart temperature control mechanism of the NFCB. Smart temperature control refers to the mechanism adopted by the NFCB to adjust the fan speed, and thus to regulate the temperature according to SET the BTSNFCBBP(Op environment GBFDtional) temperature. 111202 Number of the start CIC. The C/C of each E1/T1 timeslot can be calculated on the basis of this parameter. Assume that the start CIC is 100, the CIC of the E1 timeslots on the A interface will automatically be set to 100, 101, 102, 103, and so on. Assume that the CIC of an E1 timeslot is 65535, the CICs of all successive ADD E1 timeslots AE1T1(Mandator are all GBFDy) 65535. 111803 Number of the cabinet where the ADD outgoing port BTSMONITORT of the BTS is GBFDS(Optional) located 111202
O&M of BTS
Enumeration Type
None DISABLED
None
BTS
None
Not involved
Not involved
None
Equipme nt
STCIC
Start CIC
BSC6900
0~65535
None None
None
E1/T1 link
None
Not involved
Not involved
None
Equipme nt
STCN
BSC6900
O&M of BTS
0~62
None None
None
BTS
None
Not involved
Not involved
None
Radio
6/9/2013
Page266of316
150682621.xls.ms_office
Security Level:
STD
Start Date
BSC6900
ADD OP(Mandatory)
Compound Type
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
STEP
Number of frequencies measured in each group (excluding the frequencies STR in the original GBFDNCS(Mandatory) BA table). 510901
1~32
None None
None
To ensure that all the frequencies can be measured within 24 hours, the following condition must be met: ("PERIOD" x 15) x (total number of frequencies to BSC69 be measured/"STEP") < Read & 00 (24 x 60). Write
Not involved
Not involved
None
Equipme nt
STFLG
Satellite flag
BSC6900
STIME
Start Time
BSC6900
STIRCALLO WED
EICC Allowed
BSC6900
ADD MTP3LNK(Optio nal) Satellite flag. STR BTSLOG(Option al) Start time Whether to SET enable the GCELLSOFT(O EICC ptional) algorithm
None GBFD111202
None
NO(NO), YES(YES)
NO, YES
None NO
NO
MTP3 link
None
Not involved
Not involved
Not involved
O&M of BTS
00:00:00~23:59:59
None None
None
None
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None The parameter modification has no impact on the equipment. None
Transpor t Equipme nt
BSC6900 V900R011
GBFD115821
EICC
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
BSC6900
This parameter specifies whether the sending of system information 5, 5bis, and 5ter can be stopped on the SACCH on the SDCCH after the BTS issues a ciphering GBFDcommand. 113521
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
STOPTIME
Time for which the BTS waits to stop the fallback function after the OML is set up. With this parameter, the BTS does not stop the fallback function when SET the OML is BTSFALLBACK( set up GBFDOptional) transiently. 510309 Whether to enable the signaling point with the ADD signaling N7DPC(Optional transfer ) function. None Mode of STR stopping the CPUUSAGETST CPU usage (Mandatory) test Number of the outgoing port of the BTS where the ADD monitoring BTSMONITORT timeslot is S(Mandatory) located SET Start time of GCELLFREQSC frequency AN(Optional) scanning
60~300
None
120 BTS
Not involved
Not involved
The parameter modification has no impact on the None equipment. None This paramete r is supporte d only by the following types of BTSs: BTS3012 , BTS3006 C, BTS3012 AE, BTS3012 II, and The parameter modification BTS3002 has no impact on the E. equipment. None
Radio
Equipme nt
STP
BSC6900
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
SCCP
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
STPMODE
Stop mode
BSC6900
MRFD210301
Configuration Management
Enumeration Type
None None
None
None
None
Not involved
Not involved
Not involved
None
Equipme nt
STPN
BSC6900
GBFD114701 GBFD112401
STRTM
Start time
BSC6900
None None
None
BTS
None
Not involved
Not involved
None
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio Equipme nt
BSC6900 V900R011
STSN
BSC6900
Number of the slot where the ADD outgoing port BTSMONITORT of the BTS is GBFDS(Optional) located 111202 Number of the subrack where the ADD outgoing port BTSMONITORT of the BTS is GBFDS(Optional) located 111202
O&M of BTS
0~23
None None
None
BTS
None
Not involved
Not involved
None
Radio
STSRN
BSC6900
O&M of BTS
0~254
None None
None
BTS
STSUBTS
BSC6900
STT
Start Time
BSC6900
Number of the subtimeslot on ADD the outgoing BTSMONITORT port of the S(Mandatory) BTS Start time. The input ADD format is OP(Mandatory) HH&MM&SS.
0~7
None None
None
BTS
Read & None Write If the added monitoring timeslot works at 64 kbit/s, the sub-timeslots are numbered from 0. If the added monitoring timeslot works at 32 kbit/s, the sub-timeslots are numbered from 0 or 4. If the added monitoring timeslot works at 16 kbit/s, the sub-timeslots are numbered from 0, 2, 4, or 6. If the added monitoring timeslot works at 8 kbit/s, the subtimeslots are numbered from any value among 0 Read & to 7. Write
Not involved
Not involved
None
Radio
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
Compound Type
00:00:00~23:59:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
STTS
BSC6900
Number of the timeslot ADD on the BTSMONITORT outgoing port GBFDS(Mandatory) of the BTS 111202
O&M of BTS
STTYPE
BTS Type
BSC6900
GBFD111202
O&M of BTS
Interval Type 1~31 BTS30(BTS30), BTS312(BTS312 ), BTS3001C(BTS3 001C), BTS3001CP(BT S3001CP), BTS3002C(BTS3 002C), BTS3012A(BTS3 012A), BTS3006A(BTS3 006A), BTS3012(BTS30 12), BTS3006C(BTS3 006C), BTS3002E(BTS3 002E), BTS3012AE(BTS 3012AE), BTS3012_II(BTS 3012 II), DBS3900_GSM( DBS3900 GSM), BTS3900_GSM( BTS3900 GSM), BTS3900A_GSM (BTS3900A GSM), DBS3036(DBS30 36), Enumeration BTS3036(BTS30 Type 36),
1~31
None None
None
BTS
None
Not involved
Not involved
None
Radio
BTS30, BTS312, BTS3001C, BTS3001CP, BTS3002C, BTS3012A, BTS3006A, BTS3012, BTS3006C, BTS3002E, BTS3012AE, BTS3012_II, BTS3900_GSM, BTS3900A_GSM, BTS3036, BTS3036A, BTS3900L_GSM, BTS3900B_GSM, BTS3900E_GSM
None None
None
BTS
If "Work Mode for Auto Download Activation" is "TMUAUTOACT", the BTS type must be consistent with the actual Read & BTS type. Write
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
BSC ID in the TC pool when block BLK or unblock A ACIC(Mandatory interface GBFD) circuit. 113726 BSC ID in the TC pool ADD when add A AE1T1(Mandator interface GBFDy) E1/T1. 113726 Command string that is STR transparently BTSLOG(Option transmitted GBFDal) to the BTS 111202 Maximum sub-frame length. This parameter indicates the maximum subframe length for multiplexing. If the length of a sbuframe exceeds this GBFDvalue, it is 118604 ADD not GBFDIPMUX(Optional) multiplexed. 118610
TC Pool
1~15
None None
None
E1/T1 link
When SUBBSC is selected for "BSC flag", this parameter should be Read & set. Write When SUBBSC is selected for "BSC flag", this parameter should be Read & set. Write
Not involved
Not involved
None
Equipme nt
BSC6900
TC Pool
1~15
None None
None
E1/T1 link
Not involved
Not involved
None
Equipme nt
SUBCMD
Command Parameter
BSC6900
O&M of BTS
String Type
None
1~64 characters
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
16~1023
byte
127
Not involved
Not involved
The adjacent node ID must be The parameter modification configure has no impact on the d. equipment. None
Transpor t
6/9/2013
Page267of316
150682621.xls.ms_office
Security Level:
SUBFRAME THRES
BSC6900
Multiplexing subframe threshold. The data stream to be multiplexed on the same multiplexing channel must be of the same type, and the length of the packet before multiplexing cannot exceed the multiplexing subframe threshold. If the length of a packet exceeds the multiplexing subframe threshold, the packet is ADD transmitted BTSABISMUXFL without being GBFDOW(Optional) multiplexed. 118604 ADD SUBTSK(Mandat ory) ADD SUBCMD(Manda tory) SET SUBNET(Mandat ory)
Abis MUX
16~1023
byte
127
127 BTS
This parameter must meet the following requirements: The sum of the value of "MUX Sub Frame Threshold" and 8 must be smaller than the value of "MUX Packet Read & Length Threshold". Write
Not involved
Not involved
None
Radio
SUBID
Subtask ID
BSC6900
GBFD111203
O&M of BSC
1~50
None None
None
RNC
None
Not involved
Not involved
None
SUBNET
Subnet No.
BSC6900
None
1~124, 128~189
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
BSC6900
SUBTS
BSC6900
This parameter specifies whether the CS services preempt the SET sublink GCELLSOFT(O resources of ptional) PS services. Whether to allow the CS services to preempt the sublink resources of PS services when the Abis SET resources BTSFLEXABISP are ARA(Optional) congested Number of SET the subBTSOMLTS(Ma timeslot on ndatory) the port Sub-version No. of the TMU board. It is configured according to the actual situation. Whether the CIC circuits in use on the A interface can be assigned. When this parameter is set to YES and the MSC assigns new calls to an ongoing A interface circuit, the original calls (that are occupying the circuit) are released, and the circuit is used by the new calls. When this parameter is set to NO and the MSC assigns new calls to the ongoing A SET interface OTHSOFTPARA circuit, the (Optional) new callsto are Whether use Back-up SET port for CLK(Optional) LINE2 to Whether use Back-up SET port for CLK(Optional) LINE1 SET BTSAUTODLDA CTINFO(Mandat ory)
GBFD117301
Flex Abis
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid when "FLEXABISMODE" in the "MOD BTS" Read & command is set to YES. Write
Not involved
Not involved
None
Transpor t
GBFD117301
Flex Abis
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The transport path should be re-established after the parameter modification.
Radio
GBFD111203
O&M of BSC
Enumeration Type
0, 2, 4, 6
None None
None
BTS
None
BTS
None
None
Radio
SubVer
BSC6900
GBFD111202
O&M of BTS
0~65535
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
SupportApply Support Apply UsedCic Used A Cic SUPPORTB Use Back-up port AKCLK2SRC for LINE2 SUPPORTB AKCLKSRC Use Back-up port for LINE1
BSC6900
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
BSC6900
NO, YES
None None
None
None
None
Not involved
Not involved
None
BSC6900
NO, YES
None None
None
None
None
Not involved
Not involved
BSC6900
BSC6900
SUPPORTD TM
Support DTM
BSC6900
Whether to SET support the GCELLSBC(Opti broadcast of onal) the cell name whether to SET support the BSCPSSOFTPA high multislot RA(Optional) class. Whether to support dual transfer mode (DTM). The DTM allows an MS to use the circuit switching service and the packet switching service at the same time. This function must be SET supported by GCELLGPRS(O the network ptional) side. SET BSCPSSOFTPA Whether to RA(Optional) support EDA. Whether to support the enhanced DTM function. Comparing to the DTM, the enhanced DTM improves the CS setup and release. During the CS service SET setup, the PS GCELLGPRS(O service is not ptional) interrupted. Whether the FE/GE BTS supports inter-BTS SET local BSSLS(Optional) switching
GBFD113602
Enumeration Type
GBFD119402
Enumeration Type
NO(No), YES(Yes) NO, YES NOTSUPPORT( Not Support), SUPPORT(Supp NOTSUPPORT, ort) SUPPORT
None None
NO
Cell
None
Not involved
Not involved
None When the simple cell broadcas t function is enabled, the BSC provides the simple cell broadcas t service if the CBC is not provided. The simple cell broadcas t function is used to broadcas t the message s that are not changed frequentl The parameter modification y. has no impact on the The equipment. None The parameter modification has no impact on the equipment. None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
None None
NOTSUPPORT
BSC
None
Not involved
Not involved
None
Radio
GBFD114151
DTM
Enumeration Type
SUPPORTE DA
Support EDA
BSC6900
GBFD119401
UNSUPPORT, SUPPORT
None None
None
Cell
This parameter is valid only when "GPRS" is set Read & to SupportAsInnPcu. Write
Cell
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
NOTSUPPORT, SUPPORT
None None
NOTSUPPORT
BSC
None
Not involved
Not involved
None
Radio
SUPPORTE NDTM
GBFD114151
DTM
Enumeration Type
None None
None
Cell
This parameter is valid only when "GPRS" is set to SupportAsInnPcu and "SUPPORTDTM" is set Read & to SUPPORT. Write
Cell
None
Radio
BSC6900
GBFD117702
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page268of316
150682621.xls.ms_office
Security Level:
BSC6900
Support intracell handover to change the active speech version, then can increase the usage of TFO(Tandem Free Operation) to SET improve the BSCBASIC(Opti speech GBFDonal) quality. 115701 Minimum timeslots between two successive channel requests. After sending the access request, if the MS does not receive the response message after waiting for the minimum timeslots between two successive channel requests, the MS resends the access GBFDrequest. 119110
TFO
Enumeration Type
NO, YES
None None
NO
BSC69 00 None
Not involved
Not involved
This paramete r should be set accordin g to the requirem ents of the existing network. If this paramete r is set to Yes, the voice signals are encoded only once at the originatin g MS and decoded only once at the terminati ng MS. This improves the QoS The parameter modification of the has no impact on the MS-toequipment. None
Equipme nt
SVALUE
S Value
BSC6900
Access
Enumeration Type
T_12(12), T_15(15), T_20(20), T_30(30), T_41(41), T_55(55), T_76(76), T_109(109), T_163(163), T_217(217)
T_12, T_15, T_20, T_30, T_41, T_55, T_76, T_109, T_163, T_217
None None
T_20
Cell
None
Not involved
Not involved
None
Radio
SVRIP
Server IP
BSC6900
Server IP address used on the SGSN side in the IP subnet dynamic ADD configuration GBFDNSE(Mandatory) procedure. 118603 Server UDP port number used on the SGSN side in the IP subnet dynamic ADD configuration NSE(Mandatory) procedure. Operating SET state of the ALMPORT(Optio environment nal) alarm port Nastar SET independent NASTARSWITC measurement H(Mandatory) switch
Gb over IP
IP Address Type
None
None
NSE
None
Not involved
Not involved
None
Equipme nt
SVRPORT
BSC6900
GBFD118603
Gb over IP
0~65535
None None
None
NSE
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
SW
Switch
BSC6900
SW
Switch Value
BSC6900
Enumeration Type
None None
None
None
None
Not involved
Not involved
None
Equipme nt
Enumeration Type
OFF(CLOSE), ON(OPEN)
ON, OFF
None None
OFF
RNC
None
Not involved
Not involved
None
Equipme nt
SW
BSC6900
If this parameter is set to "ON", you must set "OMU automatic switchover interval". Otherwise, "OMU automatic switchover SET interval" is ASWPARA(Man not GBFDdatory) displayed. 111203 switch for authenticatin g objects. When the switch is enabled, the BSC system authenticates the BTS objects of the user; when the switch is disabled, the BSC system does not SET authenticate OBJAUTHSW(M the BTS GBFDandatory) objects. 111203 The switch for the parameter indicated by SET TYPE FACFG(Mandato parameter to MRFDry) be set. 210304 SET Whether to BTSENVALMPO enable the GBFDRT(Mandatory) alarm port 111202
O&M of BSC
Enumeration Type
ON, OFF
ON, OFF
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
SW
Switch
BSC6900
O&M of BSC
Enumeration Type
OFF(OFF), ON(ON)
OFF/ON
None None
ON
BSC69 00 None
Not involved
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
SW
Switch
BSC6900
Faulty Management
OFF/ON
None None
None
None
None
Not involved
Not involved
Not involved
None
SW
Switch
BSC6900
O&M of BTS
CLOSE, OPEN
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. Not involved The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
SWEEK
Start week
BSC6900
Switch
Port switch
BSC6900
SWITCH
BSC6900
Weekday on which DST starts State of the panel port switch Grace Protection Period Switch determines whether to enter the grace protection period.
MRFD210301 MRFD210301
SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesda y), THU(Thursday), SUN, MON, TUE, FRI(Friday), WED, THU, FRI, SAT(Saturday) SAT
None None
None
BSC69 00 None
Not involved
Not involved
None
CLOSE, OPEN
CLOSE, OPEN
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
None
None
Enumeration Type
ON, OFF
ON, OFF
None None
None
BSC69 00 None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
SWITCH
BSC6900
Turn on or SET turn off the BFDPROTOSW( BFD protocol GBFDMandatory) switch 118609 The field indicates whether the primary path can be ADD switched SCTPLNK(Optio when it is nal) available. None The association is smoothly switched over to the primary path after the number of ADD heartbeat SCTPLNK(Optio responses is nal) received. None Valid voltage level of the dry contact alarm. This parameter specifies the voltage level specifications of special Boolean alarms (No.1 to No.4). The alarm can be a high level alarm or a low level alarm. The bit 0 indicates high level alarm and the bit 1 indicates low level alarm. By default, all SET the alarms BTSDHEUBP(Op are high level GBFDtional) alarms. 111202
Enumeration Type
None
None
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
None
Enumeration Type
NO(NO), YES(YES)
NO, YES
None YES
YES
SCTP link
None
Not involved
Not involved
None
Transpor t
BSC6900
None
1~254
None
10
SCTP 10 link
None
Not involved
Not involved
None
Transpor t
BSC6900
O&M of BTS
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page269of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
Common alarm switch valid level [12]. This parameter consists of two bits, each of which indicates the active level of the SET correspondin BTSRXUBP(Opti g Boolean onal) alarm. Common alarm switch valid level [14]. This parameter consists of four bits, each of which indicates the active level of the SET correspondin BTSRXUBP(Opti g Boolean onal) alarm.
MRFD210304
Faulty Management
NO1DISABLE, NO2DISABLE
NO1DISABLE, NO2DISABLE
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
MRFD210304
Faulty Management
None None
None
BTS
None
Not involved
Not involved
None Change this paramete r will impact the patch function controlle d by switch 1. Change this paramete r will impact the patch function controlle d by switch 10.
Equipme nt
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
None
0~4294967295
None
BSC69 0 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
BSC69 00 None
Not involved
Not involved
Change this paramete r will impact the patch function controlle The parameter modification d by has no impact on the switch 2. equipment. None Change this paramete r will impact the patch function controlle The parameter modification d by has no impact on the switch 3. equipment. None Change this paramete r will impact the patch function controlle The parameter modification d by has no impact on the switch 4. equipment. None Change this paramete r will impact the patch function controlle The parameter modification d by has no impact on the switch 5. equipment. None Change this paramete r will impact the patch function controlle The parameter modification d by has no impact on the switch 6. equipment. None Change this paramete r will impact the patch function controlle The parameter modification d by has no impact on the switch 7. equipment. None Change this paramete r will impact the patch function controlle The parameter modification d by has no impact on the switch 8. equipment. None Change this paramete r will impact the patch function controlle The parameter modification d by has no impact on the switch 9. equipment. None
BSC6900 V900R011
Transpor t
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None OFF
OFF
BSC69 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
None
None
0~4294967295
None
BSC69 0 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
None
None
0~4294967295
None
BSC69 0 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
None
None
0~4294967295
None
BSC69 0 00 None
Not involved
Not involved
BSC6900 V900R011
Transpor t
SWITCHPO RTNO
Switch Port
BSC6900
Number of the switching port. If "Link Attribute" is set to "BBU", the switching port must be configured. The value ranges from GBFD3 to 5. 111202 GBFD111203 MRFD210305
O&M of BTS
3~5
None None
None
BTS
None
Not involved
Not involved
None
Radio
SWOP
Whether to enable the SET local user OPSW(Mandato management ry) function
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None ON
None
RNC
None
Not involved
Not involved
None
Equipme nt
SWSEQ
BSC6900
SYMOFFSE T
BSC6900
Sequence of SET the start TZ(Mandatory) week of DST Symbol offset of the BTS set manually. After the offset information of the BTS is collected, the symbol offset is adjusted. Adjustment value = Collected symbol offset relative to the reference BTS - (BTS symbol offset SET + BSC BTSAISS(Option symbol al) offset).
MRFD210301
Configuration Management
Enumeration Type
FIRST(First), SECOND(Secon d), THIRD(Third), FIRST, SECOND, FOURTH(Fourth) THIRD, FOURTH, , LAST(Last) LAST
None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
GBFD118201
SoftSynchronized Network
0~2500
None
0 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
SYNCCASE
Sync case
BSC6900
Synchronizati on status. This parameter is used to identify different 3G cells. This parameter should be same with the configuration GBFDof 3G cells. 114302
GSM/TDSCDMA Interoperability
Enumeration Type
None None
None
Cell
Not involved
Not involved
None
Radio
SYNCMETH OD
BSC6900
SYNFLAG
BSC6900
Site synchronizati on method. AISS stands for the airinterface soft synchronizati on method, and GPS stands for SET the GPS BTSOTHPARA( synchronizati GBFDOptional) on method. 117002 CMP Automatic BRDAREA(Optio synchronizati MRFDnal) on flag 210401
IBCA (Interference Based Channel Enumeration Allocation) Type BSC/RNC Software Enumeration Management Type
AISS, GPS
None None
None
BTS
None
Not involved
Not involved
None
TRUE, FALSE
TRUE, FALSE
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
6/9/2013
Page270of316
150682621.xls.ms_office
Security Level:
SYNMODE
BSC6900
SET Synchronizati BTSIPCLKPARA on mode of GBFD(Mandatory) the IP clock 118606 Interim synchronizati on period (in days). The BTS can reinitiate the SET synchronizati BTSIPCLKPARA on only after GBFD(Optional) the period. 118606 Interim synchronizati on period (in hours). The BTS can reinitiate the SET synchronizati BTSIPCLKPARA on only after GBFD(Optional) the period. 118606 Interim synchronizati on period (in minutes). The BTS can reinitiate the SET synchronizati BTSIPCLKPARA on only after GBFD(Optional) the period. 118606 Contact way of the Base Station Controller supplier
Clock over IP
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Radio
BSC6900
Clock over IP
1~7
None
None
BTS
None
Not involved
Not involved
None
Radio
BSC6900
Clock over IP
0~23
None
None
BTS
None
Not involved
Not involved
None
Radio
SYNTIMEMI N
BSC6900
Clock over IP
0~59
min
None
None
BTS
None
Not involved
Not involved
None
Radio
SYSCONTA CT
BSC6900
SET SYS(Optional)
MRFD210301
Configuration Management
String Type
None
1~250 characters
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
SYSDESC
SYSFLOWL EV
BSC6900
Description of the Base Station Controller The system flux level is the current flux control level of the system. A load handover is allowed only when the system flux is lower than SET the value of GCELLHOAD(O this ptional) parameter. Location of the Base SET Station SYS(Optional) Controller SET SYS(Optional) Whether sending the system information type 10 message on the SET VGCS/VBS BSCBASIC(Opti TCH is onal) allowed. Identifier of the Base SET Station SYS(Optional) Controller Services provided by the Base Station Controller
MRFD210301
Configuration Management
String Type
None
1~250 characters
None None
None
None
None
Not involved
Not involved
None
Equipme nt
GBFD110601 GBFD510501
0, 8~11
None None
10 Cell
This parameter is valid only when "LOADHOEN" in "SET GCELLHOBASIC" is set Read & to YES. Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
MRFD210301
Configuration Management
String Type
None
1~250 characters
None None
None
None
None
Not involved
Not involved
None
Equipme nt
GBFD510301
Enumeration Type
NO(No), YES(Yes)
NO, YES
None YES
YES
BSC69 00 None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
SYSOBJECT ID System ID
BSC6900
MRFD210301
Configuration Management
String Type
None
1~250 characters
None None
None
None
None
Not involved
Not involved
None
Equipme nt
BSC6900
SET SYS(Optional)
MRFD210301
Configuration Management
String Type
None
1~250 characters
None None
None
None
None
Not involved
Not involved
None
Equipme nt
T1
T1
BSC6900
T1
Time1
BSC6900
T10TMR
Timer T1, specifying the duration of monitoring the BVC SET blocking BSSGPPARA(O (unblocking) ptional) procedure. Value of the CHG first timer for BTSPTUSHKTM( the PTU Optional) handshake When the reception of a TFP causes unavailability of a route, this timer is started to regularly check SET whether the MTP3TMR(Optio route is nal) recovered.
GBFD119001
Gb Interface Function
1000~30000
ms
None
3000 BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
GBFD118601
Abis over IP
1~60
5 None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
None
None
30000~60000
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
T12TMR
This timer is a protection timer waiting for an uninhibit acknowledge ment message (LUA) from the peer end after an uninhibit message SET (LUN) is sent MTP3TMR(Optio to the peer nal) end. None This timer is a protection timer waiting for a force uninhibit acknowledge ment message (LUA) from the peer end after a force uninhibit message SET (LFU) is sent MTP3TMR(Optio to the peer nal) end. None This timer is a protection timer waiting for an inhibition acknowledge ment message (LIA) from the peer end after an inhibition message SET (LIN) is sent MTP3TMR(Optio to the peer nal) end. None This timer is started when a link fails to be started. The restart of the link is SET initiated after MTP3TMR(Optio this timer nal) expires. None When a normal changeover cannot be initiated, services will be changed over to an alternative link after this timer expires SET to avoid MTP3TMR(Optio disorder of nal) data. None Timer T2, specifying the duration of monitoring the procedure of SET resetting SIG BSSGPPARA(O BVC and ptional) PTP BVC. Value of the CHG second timer BTSPTUSHKTM( for the PTU Optional) handshake
None
800~1500
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
T13TMR
BSC6900
None
800~1500
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
T14TMR
BSC6900
None
2000~3000
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
T17TMR
BSC6900
None
800~1500
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
T1TMR
BSC6900
None
800~1200
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
T2
T2
BSC6900
GBFD119001
Gb Interface Function
1000~120000
ms
None
3000 BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
T2
Time2
BSC6900
GBFD118601
Abis over IP
1~60
5 None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page271of316
150682621.xls.ms_office
Security Level:
T200
T200
BSC6900
Timer in the LAPD protocol. The value of the timer indicates the time when the LAPD link waits for the response or acknowledge ment frame SET after sending BTSRINGATTR( the command GBFDOptional) frame. 117801 This parameter specifies the expiry value of timer T200 used for the FACCH/TCH F over the Um interface. For the function of timer T200 and the effect of the parameter, see the description of "T200 GBFDSDCCH". 111002 This parameter specifies the expiry value of timer T200 used for the FACCH/TCH H over the Um interface. For the function of timer T200 and the effect of the parameter, see the description of "T200 GBFDSDCCH". 111002 This parameter specifies the expiry value of timer T200 used for the SACCH over the Um interface when the TCH supports SAPI3 services. For the function of timer T200 and the effect of the parameter, see the description of "T200 GBFDSDCCH". 111002 This parameter specifies the expiry value of timer T200 used for the SACCH on the SDCCH. For the function of timer T200 and the effect of the parameter, see the description of "T200 SDCCH". This parameter specifies the expiry value of timer T200 used for the SACCH over the Um interface when the TCH supports SAPI0 services. For the function of timer T200 and the effect of the parameter, see the description of "T200 SDCCH". This parameter specifies the timeout value of timer T200 used for the SDCCH over the Um interface. T200 prevents the data link layer from deadlock during data transmission. The data link layer transforms the physical link that is vulnerable to errors into a sequential non-error data link. The entities at the two ends of this data link use the acknowledge ment retransmissio n
Ring Topology
ms
None
When the transmission quality is good, the recommended settings are as follows: "Ring II Wait Time Before Switch" = 0; "Ring II Try Rotating Duration Time" = 60; "Ring II Rotating Penalty Time" = 0; "T200(10ms)" = 12; "T203(s)" = 1; and "N200" = 3. When the transmission quality is bad, the recommended settings are as follows: "Ring II Wait Time Before Switch" = 30; "Ring II Try Rotating Duration Time" = 60; "Ring II Rotating Penalty Time" = 0; "T200(10ms)" = 24; "T203(s)" = 3; and "N200" = 3. BTS
Not involved
Not involved
None
Radio
BSC6900
1~255, step: 5
ms
None
50 Cell
None
Not involved
Not involved
None
If timer T200 is set to a smaller value, the transmit end may mistakenly regard that the link is faulty and the data transmission fails before the transmit end receives a response from the peer end. If timer N200 is set to a smaller value, the number of data retransmissions is reduced and the success rate of transmission is reduced. If timers T200 and N200 are set The parameter modification to greater values, the channels are seized has no impact on the all along when the link is faulty. Thus, Versions earlier than equipment. resources are wasted. BSC6900 V900R011
Radio
BSC6900
1~255, step: 5
ms
None
None
Cell
None
Not involved
Not involved
None
If timer T200 is set to a smaller value, the transmit end may mistakenly regard that the link is faulty and the data transmission fails before the transmit end receives a response from the peer end. If timer N200 is set to a smaller value, the number of data retransmissions is reduced and the success rate of transmission is reduced. If timers T200 and N200 are set The parameter modification to greater values, the channels are seized has no impact on the all along when the link is faulty. Thus, Versions earlier than equipment. resources are wasted. BSC6900 V900R011
Radio
1~255, step: 10
ms
None
None
Cell
None
Not involved
Not involved
None
If timer T200 is set to a smaller value, the transmit end may mistakenly regard that the link is faulty and the data transmission fails before the transmit end receives a response from the peer end. If timer N200 is set to a smaller value, the number of data retransmissions is reduced and the success rate of transmission is reduced. If timers T200 and N200 are set The parameter modification to greater values, the channels are seized has no impact on the all along when the link is faulty. Thus, Versions earlier than equipment. resources are wasted. BSC6900 V900R011
Radio
BSC6900
GBFD111002
1~255, step: 10
ms
None
None
Cell
None
Not involved
Not involved
None
If timer T200 is set to a smaller value, the transmit end may mistakenly regard that the link is faulty and the data transmission fails before the transmit end receives a response from the peer end. If timer N200 is set to a smaller value, the number of data retransmissions is reduced and the success rate of transmission is reduced. If timers T200 and N200 are set The parameter modification to greater values, the channels are seized has no impact on the all along when the link is faulty. Thus, Versions earlier than equipment. resources are wasted. BSC6900 V900R011
Radio
GBFD111002
1~255, step: 10
ms
None
None
Cell
None
Not involved
Not involved
None
If timer T200 is set to a smaller value, the transmit end may mistakenly regard that the link is faulty and the data transmission fails before the transmit end receives a response from the peer end. If timer N200 is set to a smaller value, the number of data retransmissions is reduced and the success rate of transmission is reduced. If timers T200 and N200 are set The parameter modification to greater values, the channels are seized has no impact on the all along when the link is faulty. Thus, Versions earlier than equipment. resources are wasted. BSC6900 V900R011
Radio
BSC6900
GBFD111002
1~255, step: 5
ms
None
None
Cell
None
Not involved
Not involved
None
If timer T200 is set to a smaller value, the transmit end may mistakenly regard that the link is faulty and the data transmission fails before the transmit end receives a response from the peer end. If timer N200 is set to a smaller value, the number of data retransmissions is reduced and the success rate of transmission is reduced. If timers T200 and N200 are set The parameter modification to greater values, the channels are seized has no impact on the all along when the link is faulty. Thus, Versions earlier than equipment. resources are wasted. BSC6900 V900R011
Radio
BSC6900
This parameter specifies the expiry value of timer T200 when the SDCCH supports SAPI3 services. For the function of timer T200 and the effect of the parameter, see the description of "T200 GBFDSDCCH". 111002
1~255, step: 5
ms
None
None
Cell
None
Not involved
Not involved
None
If timer T200 is set to a smaller value, the transmit end may mistakenly regard that the link is faulty and the data transmission fails before the transmit end receives a response from the peer end. If timer N200 is set to a smaller value, the number of data retransmissions is reduced and the success rate of transmission is reduced. If timers T200 and N200 are set The parameter modification to greater values, the channels are seized has no impact on the all along when the link is faulty. Thus, Versions earlier than equipment. resources are wasted. BSC6900 V900R011
Radio
6/9/2013
Page272of316
150682621.xls.ms_office
Security Level:
T203
T203
BSC6900
Timer in the LAPD protocol. The value of the timer indicates the maximum duration for no frame SET exchange in BTSRINGATTR( the LAPD GBFDOptional) link. 117802 After a local link is inhibited, this timer is started to regularly check the management SET states at MTP3TMR(Optio both ends of nal) the link. None After a remote link is inhibited, this timer is started to regularly check the management SET states at MTP3TMR(Optio both ends of nal) the link. None This timer is a protection timer waiting for an extended changeover acknowledge ment message (XCA) from the peer end after an extended changeover order message SET (XCO) is MTP3TMR(Optio sent to the nal) peer end. None Timer T3. T3 is started after the message SUSPEND is received on the BSC side. T3 is stopped after the message SET SUSPEND BSSGPPARA(O ACK is ptional) received. Value of the CHG third timer for BTSPTUSHKTM( the PTU Optional) handshake When the BTS sends physical information to the MS, the BTS starts the timer T3105.If the timer T3105 expires before the BTS receives the SAMB frame from MS, the BTS resends physical information to the MS and restarts the timer T3105. The maximum times for resending physical information is "Max Resend Times of Phy.Info.". For details, SET see GSM GCELLHOAD(O Rec. 04.08 ptional) and 08.58. Timer for retransmitting the VGCS SET UPLINK GCELLGSMR(O GRANT ptional) message T3168 is used to set the maximum duration for the MS to wait for the uplink assignment message. After the MS originates the uplink TBF setup request by sending the packet resource request or the channel request in the packet uplink acknowledge message, the timer T3168 is started to wait for the packet uplink assignment message on the network side. If the SET MS receives GCELLPSBASE( the packet Optional) uplink Duration of releasing the TBF after the MS receives the last data block. When the MS receives the RLC data block containing the flag identifying the last data block and confirms that all the RLC data blocks in the TBF are received, the MS sends the packet downlink acknowledge message containing the last flag acknowledge ment and the timer T3192 SET is started. If GCELLPSBASE( the timer Optional) T3192
1~10
None
When the transmission quality is good, the recommended settings are as follows: "Ring II Wait Time Before Switch" = 0; "Ring II Try Rotating Duration Time" = 60; "Ring II Rotating Penalty Time" = 0; "T200(10ms)" = 12; "T203(s)" = 1; and "N200" = 3. When the transmission quality is bad, the recommended settings are as follows: "Ring II Wait Time Before Switch" = 30; "Ring II Try Rotating Duration Time" = 60; "Ring II Rotating Penalty Time" = 0; "T200(10ms)" = 24; "T203(s)" = 3; and "N200" = 3. BTS
Not involved
Not involved
None
Radio
T22TMR
BSC6900
None
180000~360000
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
T23TMR
None
180000~360000
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
T2TMR
BSC6900
None
1400~2000
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
T3
T3
BSC6900
GBFD119001
Gb Interface Function
1000~10000
ms
None
10000 BSC
T3
Time3
BSC6900
GBFD118601
Abis over IP
1~60
5 None
None
None The value of this parameter must be smaller than or equal to "Time2[S]".
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
Not involved
Not involved
T3105
T3105
BSC6900
GBFD110601 GBFD510501
0~255, step:10
ms
None
7 Cell
None
Not involved
Not involved
None The physical informati on is sent over the FACCH. Every four TDMA frames are sent once over the FACCH, which takes 18 ms. If the T3105 timer is set to less than 18 ms, when the T3105 timer expires for the first time, the physical informati on needs The parameter modification to be has no impact on the retransmi equipment. None
BSC6900 V900R011
Equipme nt
Radio
T3115
T3115
BSC6900
GBFD510302
1~255
None
None
Cell
None
Not involved
Not involved
None
Equipme nt
T3168
T3168
BSC6900
GBFD114101
GPRS
Enumeration Type
500ms(500ms), 1000ms(1000ms ), 1500ms(1500ms ), 2000ms(2000ms ), 2500ms(2500ms ), 3000ms(3000ms ), 3500ms(3500ms 500ms, 1000ms, ), 1500ms, 2000ms, 4000ms(4000ms 2500ms, 3000ms, ) 3500ms, 4000ms
ms
None
500ms
Cell
None
Not involved
Not involved
None
Radio
T3192
T3192
BSC6900
GBFD114101
GPRS
Enumeration Type
0ms(0ms), 80ms(80ms), 120ms(120ms), 160ms(160ms), 200ms(200ms), 500ms(500ms), 1000ms(1000ms 0ms, 80ms, 120ms, ), 160ms, 200ms, 1500ms(1500ms 500ms, 1000ms, ) 1500ms
ms
None
500ms
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page273of316
150682621.xls.ms_office
Security Level:
T3212
T3212
BSC6900
This parameter specifies the length of the timer for SET periodic GCELLIDLEBAS location IC(Optional) update. Timer on the
GBFD110301
Location Updating
0~255, step: 6
min
None
None
Cell
None
Not involved
Not involved
It is recomme nded that you select a greater value, such as 16, 20, or 25, in the area with heavy traffic, but a smaller value, such as 2 or 3, in the area with light traffic. To properly specify the value of this paramete r, it is necessar y to perform The parameter modification overall has no impact on the and long- equipment.
If this parameter is set to a smaller value, the paging success rate increases but the load on the SDCCH also increases, thus Versions earlier than causing congestion on the SDCCH. BSC6900 V900R011
Radio
T391
ADD BC(Optional)
DTE side, specifying the duration of acknowledgin g the sending GBFDlink integrity. 510002
Gb Over FR
5~30
10
10 BC
None
Not involved
Not involved
None
Equipme nt
T3TMR
BSC6900
When a normal changeback cannot be initiated, services will be changed back to a normal link only after this timer expires SET to avoid MTP3TMR(Optio disorder of nal) data. None Timer T4. T3 is started after the message v is received on the BSC side. T4 is stopped after the message SET RESUME BSSGPPARA(O ACK is GBFDptional) received. 119001 This timer is a protection timer waiting for a changeback acknowledge ment message (CBA) from the peer end after the first changeback declaration SET (CBD) is sent MTP3TMR(Optio to the peer nal) end. None Timer T5. When the downlink TBF is set up, if the BSC side does not receive the valid recap, the BSC originates the radio access capability update flow and the timer T5 is started. After receiving the core network SET response, BSSGPPARA(O the timer is GBFDptional) stopped. 119001 This timer is a protection timer waiting for a changeback acknowledge ment message (CBA) from the peer end after the second changeback declaration SET (CBD) is sent MTP3TMR(Optio to the peer nal) end. None Timer T6. The BSC sends the SGSN request to download the BSS PFC. When the QoS parameter is obtained, the timer is started. After the message CREATE_BS S_PFC is received, the timer is stopped. After the timer expires, the request is sent to start the procedure of SET downloading BSSGPPARA(O the BSS GBFDptional) PFC. 119001 Timer T8. The BSC sends the SGSN request to download the BSS PFC. When the QoS parameter is obtained, the timer is started. After the message MODIFYBSS-PFCACK is received, the timer is stopped. After the timer expires, the request is sent to start the procedure of SET downloading BSSGPPARA(O the BSS GBFDptional) PFC. 119001 This timer is started when a transmission prohibited message (TFP) is sent. The TFP will not be sent any SET more during MTP3TMR(Optio the running of nal) this timer. None
None
800~1200
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
T4
T4
BSC6900
Gb Interface Function
1000~10000
ms
None
5000 BSC
None
Not involved
Not involved
None
Equipme nt
T4TMR
BSC6900
None
800~1200
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
T5
T5
BSC6900
Gb Interface Function
1000~30000
ms
None
1000 BSC
None
Not involved
Not involved
None
Equipme nt
T5TMR
BSC6900
None
800~1200
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
T6
T6
BSC6900
Gb Interface Function
1000~10000
ms
None
3000 BSC
None
Not involved
Not involved
None
Equipme nt
T8
T8
BSC6900
Gb Interface Function
1000~10000
ms
None
3000 BSC
None
Not involved
Not involved
None
Equipme nt
T8TMR
None
800~1200
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
6/9/2013
Page274of316
150682621.xls.ms_office
Security Level:
TAFLTLEN
BSC6900
When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating environment for the sake of accuracy. This parameter specifies the number of measurement reports SET sampled for GCELLHOFITPE filtering the N(Optional) TA. Whether the TA is used as a decisive condition for the concentric cell handover. Whether to enable the time advance (TA) handover. The TA handover determines whether the timing advance (TA) is higher than the predefined TA threshold. When the TA is higher than the predefined TA threshold, a TA handover is triggered. The TA is calculated based on the distance between the MS and the BTS. The longer the distance is, the greater the TA value One of the parameters that determine the coverage of the OL subcell and UL subcell. When "Enhanced Concentric Allowed" is set to NO, "TA Hysteresis", "RX_LEV Threshold", "RX_LEV Hysteresis", "RX_QUAL Threshold", and "TA Threshold" determine the coverage of the OL subcell and UL subcell. When "Enhanced Concentric Allowed" is set to YES, "TA
GBFD110601 GBFD510501
ms
None
4 Cell
None
Not involved
Not involved
None
Radio
TAFORUOH OALLOW
TA for UO HO Allowed
BSC6900
GBFD113201
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
Radio
TAHOEN
TA HO Allowed
BSC6900
GBFD110601 GBFD510501
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
TAHYST
TA Hysteresis
BSC6900
GBFD113201
0~255
bit
None
0 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
Radio
TALASTTIM E
TA HO valid time
BSC6900
The P/N criterion must be met for triggering a TA handover. That is, the TA handover can be triggered only if P measurement reports among N measurement reports meet the triggering conditions. This parameter corresponds to P in the GBFDP/N criterion. 510501
HUAWEI II Handover
1~16, step:0.5
None
1 Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "TAHOEN" is set to YES. The following condition must be met: "TASTATTIME" >= "TALASTTIME".
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
TALIMIT
TA Threshold
BSC6900
An emergency handover is triggered when TA is greater than or equal to SET the value of GCELLHOEMG( this Optional) parameter.
GBFD110601 GBFD510501
0~255
bit
None
255 Cell
This parameter is valid only when "TAHOEN" in "SET GCELLHOBASIC" is set to YES.
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. If this parameter is set to a smaller value, the The parameter modification coverage area of the cell is reduced, and has no impact on the the traffic volume on the cell may be Versions earlier than equipment. decreased. BSC6900 V900R011
Radio
This parameter specifies the interval of broadcasting the speech data of the talker on the downlink group call channel that is controlled by the BTS. When the parameter is set to 0, the BTS (instead of the BSC) performs the broadcasting SET with the GCELLGSMR(O default GBFDptional) interval 5s. 510306 When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating environment for the sake of accuracy. This parameter specifies the number of measurement reports sampled for filtering the SET TA on the GCELLHOFITPE signaling N(Optional) channel. SET LOGCFG(Mand atory) TaskID ADD AISSCFG(Mand atory) ADD NCELL(Mandato ry) COL SYNCINFO(Man datory) SET BTSEXCURSIO N(Mandatory) SET BSCSYNCOFF( Mandatory) COL BSCSYNCINFO( Mandatory)
Talker Identification
0~255
None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
ms
None
2 Cell
This parameter is valid only when "HOCTRLSWITCH" in "SET GCELLHOBASIC" is set to HOALGORITHM2.
Not involved
Not involved
None
TASKID
TaskID
BSC6900
{0~65535}
None None
None
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio Equipme nt
BSC6900 V900R011
TASKIDX
BSC6900
SoftSynchronized Network
0~7
None None
None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Equipme nt
6/9/2013
Page275of316
150682621.xls.ms_office
Security Level:
TASTATTIM E
TA HO watch time
BSC6900
TATHRES
TA Threshold
BSC6900
TAVGT
T_AVG_T
BSC6900
TAVGW
T_AVG_W
BSC6900
TB
BSC6900
TB
BSC6900
The P/N criterion must be met for triggering a TA handover. That is, the TA handover can be triggered only if P measurement reports among N measurement reports meet the triggering conditions. This parameter SET corresponds GCELLHOBASI to N in the C(Optional) P/N criterion. One of the parameters that determine the coverage of the OL subcell and UL subcell. When "Enhanced Concentric Allowed" is set to NO, "TA Hysteresis", "RX_LEV Threshold", "RX_LEV Hysteresis", "RX_QUAL Threshold", and "TA Threshold" determine the coverage of the OL subcell and UL subcell. When "Enhanced Concentric SET Allowed" is GCELLHOIUO( set to YES, Optional) "TA Filter period of the signal strength in the packet transmission mode of the MS. In the packet transmission mode, the signal level filter parameter of the filter period of the signal strength for power control in the packet transmission mode. The MS in the packet transmission mode measures the downlink signal strength. This parameter is SET used to GCELLPSPWPA calculate the RA(Optional) Cn value of Filter period of the signal strength in the packet idle mode of the MS. In the packet idle mode, the signal level filter parameter of the filter period of the signal strength for power control in the packet idle mode. The MS in the packet idle mode measures the downlink signal strength. This parameter is used to calculate the Cn value of the MS SET output GCELLPSPWPA power. This RA(Optional) parameter Number of the output segment 1: Segment 1 describes the basic information of the equipment. 2: Segment 2 describes the connection information. 3: Segment 3 describes the module information. 4: Segment 4 describes the configuration information. 5: Segment 5 describes the information of the peer equipment. 6: Segment 6 describes the version information of the host. EXP 7: Segment 7 DEVFILE(Option describes the al) cabinet Output Segment No. 1: Segment 1 describes the basic information of the equipment. 2: Segment 2 describes the connection information. 3: Segment 3 describes the module information. 4: Segment 4 describes the configuration information. 5: Segment 5 describes the information of the peer equipment. 6: Segment 6 describes the version information of the host. 7: Segment 7 EXP describes the BTSDEVFILE(O cabinet ptional) information.
GBFD510501
HUAWEI II Handover
0~16, step:0.5
None
1 Cell
This parameter is valid only when "TAHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "TASTATTIME" >= Read & "TALASTTIME". Write
Not involved
Not involved
None
Radio
GBFD113201
0~255
bit
None
63 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell. The following condition must be met: "TALIMIT" > "TATHRES".
Not involved
Not involved
None
Radio
GBFD119115
Power Control
0~25
None None
10 Cell
None
Not involved
Not involved
None
Radio
GBFD119115
Power Control
0~25
None None
10 Cell
None
Not involved
Not involved
None
Radio
GBFD111203
O&M of BSC
1~12
None None
None
BSC69 00 None
Not involved
Not involved
None.
Equipme nt
GBFD111202
O&M of BTS
1~12
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
6/9/2013
Page276of316
150682621.xls.ms_office
Security Level:
TBFQueuing Switch
BSC6900
Whether the TBF queuing is supported. When this parameter is set to ON, the TBF queuing function is supported and no Assignment Reject message is sent. When this parameter is set to OFF and there is no channel resource, an Immediate SET Assignment GCELLPSOTHE Reject RPARA(Optional message is GBFD) sent. 114101 Maximum time in which the BTS attempts to set up the OML before swapping the main and backup OMLs. If the BTS fails to set up the OML within this time, the BTS swaps SET the main and BTSOMLBACKU backup GBFDP(Optional) OMLs. 113728 The BTS repeatedly attempts to connect to port 0 or port 1 after the switchover. If the connection on one port fails within the time specified by this parameter, SET the BTS tries BTSRINGATTR( to connect to GBFDOptional) another port. 117801 Test code for the MTP3 link. After the successful test, the link can be used for carrying signaling services. If the test fails, the MTP3 periodically sends the fault locating command until the operation is successful. When the link is deleted or deactivated, the system stops to send the fault locating ADD command. MTP3LNK(Optio The default nal) value is 170. Timer Tc, specifying the interval for the BVC and MS to send flow control messages. When this parameter is set to a smaller value, the BVC and the MS send flow control messages in a shorter time, which allows the SGSN can use the latest flow control parameter to improve the transmission performance. When the BVC and MS send flow control SET messages, BSSGPPARA(O certain ptional) bandwidth is Temperature compensatio n coefficient. This parameter defines the charging voltage increase or decrease unit of each battery when the ambient temperature of the battery varies with the reference temperature regulated by the vendor by 1 degree Celsius. See the vendor specification for the setting of this parameter. In multi-mode scenario, the value of this parameter in SET this mode BTSAPMUBP(O must be the ptional) same as the
GPRS
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The access performance is affected.
Radio
TBS
BSC6900
OML Backup
30~300
None
90 BTS
Not involved
Not involved
None
Equipme nt
TBS
Ring Topology
60~300
None
None
BTS
This parameter must meet the following requirements: "FallBack Start Time" > "Ring I Wait Time Before Switch" + "Ring I Try Rotating Duration Time".
Not involved
Not involved
None
Radio
TC
Test code
BSC6900
None
None
1~254
None
170
None
BSC6900
None
Transpor t
TC
Tc
BSC6900
GBFD119001
Gb Interface Function
1000~10000
ms
None
4000 BSC
None
Not involved
Not involved
None
Equipme nt
TCC
BSC6900
GBFD111202
O&M of BTS
0~500
mV
None
80 BTS
None
Not involved
Not involved
BSC6900
This parameter specifies the cyclic redundancy check (CRC) switch, which can be set to On or Off. The value of this parameter determines whether check is performed on the TRAU frame SET between the BSCBASIC(Opti BSC and the GBFDonal) BTS. 111203
O&M of BSC
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None ON
ON
BSC69 00 None
Not involved
Not involved
None Accordin g to the GSM protocols , the BSC performs CRC on each TRAU frame. If the CRC of a certain TRAU frame fails, the TRAU frame is regarded as an invalid one. Then, the BSC performs smoothin g on the invalid frame, thus eliminatin g the noise
Equipme nt
Equipme nt
6/9/2013
Page277of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether to allow the cell to change a channel from full rate to half rate or from half rate to full rate dynamically. If this parameter is set to NO, each channel that has been adjusted is restored to the set rate mode. In addition, this parameter helps to determine the channel assignment priority. The channels in a TRX that does not allow dynamic adjustment SET are assigned GTRXDEV(Optio before the GBFDnal) channels in a 113402 If the current channel seizure ratio reaches or exceeds this value, the half-rate TCH is assigned preferentially; otherwise, the full-rate TCH is assigned GBFDpreferentially. 111005
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
TRX
None
Not involved
Not involved
None
Radio
BSC6900
0~100
per cent
None
60 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, network congestion may occur in the cell; if this parameter is set to a smaller value, The parameter modification TCHHs are allocated even when the has no impact on the traffic volume on the cell is light, this Versions earlier than equipment. affects the voice quality. BSC6900 V900R011
Radio
TCHDROPS TATDLFER
When a call drops on the TCH, the correspondin g TCH call drop counter is incremented by one if the DL FER carried in the last MR is greater than SET the value of GCELLOTHEXT( this GBFDOptional) parameter. 111004 When a call drops on the TCH, the correspondin g TCH call drop counter is incremented by one if the downlink level carried in the last MR is lower SET than the GCELLOTHEXT( value of this GBFDOptional) parameter. 111004 When a call drops on the TCH, the correspondin g TCH call drop counter is incremented by one if the downlink quality carried in the last MR is greater than SET the value of GCELLOTHEXT( this GBFDOptional) parameter. 111004 When a call drops on the TCH, the correspondin g TCH call drop counter is incremented by one if the UL FER carried in the last MR is greater than SET the value of GCELLOTHEXT( this GBFDOptional) parameter. 111004 When a call drops on the TCH, the correspondin g TCH call drop counter is incremented by one if the uplink level carried in the last MR is lower than SET the value of GCELLOTHEXT( this GBFDOptional) parameter. 111004 When a call drops on the TCH, the correspondin g TCH call drop counter is incremented by one if the uplink quality carried in the last MR is greater than SET the value of GCELLOTHEXT( this GBFDOptional) parameter. 111004 After a new TCH is assigned to an MS, the MS can be handed over to another channel only if the time during which the MS occupies the TCH is longer than the period GBFDSET specified by 110601 GCELLHOCTRL this GBFD(Optional) parameter. 510501 Maximum number of discarded MRs allowed on the TCH in SET a power GCELLPWR3(O control GBFDptional) period. 117601 Whether the TCH rate type uses the MSC strategy or BSC strategy. When this parameter is set to NO and the MSC policy is used, the BSC preferentially selects fullrate or halfrate channels based on the rate type carried by the MSC in the assignment or incoming BSC handover request. When this parameter is set to YES SET and the BSC OTHSOFTPARA policy is GBFD(Optional) used, the 111005
0~1000
per mill
None
40 Cell
None
Not involved
Not involved
None
When this parameter is set to a large value, the values of the new counters TCH call drops (DL FER) and TCH call drops (UL FER and DL FER) are reduced. When this parameter is set to a small value, the values of the two counters are increased. The overall number of call The parameter modification drops, however, remains unchanged and has no impact on the the performance of other counters is not equipment. affected. BSC6900 V900R011
Radio
TCHDROPS TATDLLEV
0~63
dB
None
6 Cell
None
Not involved
Not involved
None
When this parameter is set to a large value, the values of the new counters TCH call drops (DL receive level) and TCH call drops (UL receive level) are increased. When this parameter is set to a small value, the values of the two counters are reduced. The overall number of call The parameter modification drops, however, remains unchanged and has no impact on the the performance of other counters is not equipment. affected. BSC6900 V900R011
Radio
0~70
None None
55 Cell
None
Not involved
Not involved
None
When this parameter is set to a large value, the values of the new counters TCH call drops (DL receive quality) and TCH call drops (UL receive quality and DL receive quality) are reduced. When this parameter is set to a small value, the values of the two counters are increased. The overall number of call drops, The parameter modification however, remains unchanged and the has no impact on the performance of other counters is not equipment. affected. BSC6900 V900R011
Radio
TCHDROPS TATULFER
0~1000
per mill
None
40 Cell
None
Not involved
Not involved
None
When this parameter is set to a large value, the values of the new counters TCH call drops (UL FER) and TCH call drops (UL FER and DL FER) are reduced. When this parameter is set to a small value, the values of the two counters are increased. The overall number of call The parameter modification drops, however, remains unchanged and has no impact on the the performance of other counters is not equipment. affected. BSC6900 V900R011
Radio
TCHDROPS TATULLEV
0~63
dB
None
6 Cell
None
Not involved
Not involved
None
When this parameter is set to a large value, the values of the new counters TCH call drops (UL receive level) and TCH call drops (UL receive level and DL receive level) are increased. When this parameter is set to a small value, the values of the two counters are reduced. The overall The parameter modification number of call drops, however, remains has no impact on the unchanged and the performance of other equipment. counters is not affected. BSC6900 V900R011
Radio
0~70
None None
55 Cell
None
Not involved
Not involved
None
When this parameter is set to a large value, the values of the new counters TCH call drops (UL receive quality) and TCH call drops (UL receive quality and DL receive quality) are reduced. When this parameter is set to a small value, the values of the two counters are increased. The overall number of call drops, The parameter modification however, remains unchanged and the has no impact on the performance of other counters is not equipment. affected. BSC6900 V900R011
Radio
TCHHOMINI NTV
BSC6900
0~60
None
2 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. If this parameter is set to a smaller value, unexpected handovers may be performed The parameter modification due to incorrect MR when the call is has no impact on the initially set up, thus affecting handover Versions earlier than equipment. success rate. BSC6900 V900R011
Radio
TCHMRCUT NUM
TchMrCutNum
BSC6900
0~10
None None
3 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
TCHRATEM ODIFY
BSC6900
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Radio
6/9/2013
Page278of316
150682621.xls.ms_office
Security Level:
BSC6900
This parameter specifies the interval at which the speech service on a TCH is GBFDhanded over. 113521 This parameter specifies whether to perform periodic intracell handover for speech services on TCH. Threshold for determining that the underlaid subcell is busy. The BSC assigns channels in the underlaid subcell to the MS in a concentric cell. When "Allow Rate Selection Based on Overlaid/Und erlaid Subcell Load" is set to YES, halfrate channels are assigned if the channel seizure ratio in the underlaid subcell exceeds the value of this parameter, and full-rate channels are assigned if the channel The BSC assigns channels in the overlaid subcell to the MS in a concentric cell. If the channel seizure ratio of overlaid subcell is greater than the value of this parameter, half-rate channels are assigned. Otherwise, full-rate channels are assigned. Channel seizure ratio = (Num. of busy TCHF + Num. of busy TCHH/2)/(Nu m. of available TCHF + Num. of available
1~600
None
60 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the If this parameter is set to a smaller value, Versions earlier than equipment. the handover frequency is higher. BSC6900 V900R011
Radio
BSC6900
GBFD113521
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
None
If this parameter is set to ON, the calls The parameter modification are handed over on schedule. This has no impact on the increases the load of the BSC but equipment. improves the network security.
Radio
GBFD113201
0~100
per cent
None
60 Cell
"TCHTRICBUSYOVERL AYTHR" and "TCHTRIBUSYUNDERLA YTHR" can be set only when "HRIUOLDRATESELALL Read & OW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, the half-rate channels are assigned to the MS only when the channel seizure ratio of underlaid subcell is very high. Insufficient half-rate channels can be assigned to the MS. Thus, the capacity of the BSC is reduced. If this parameter is set to a smaller value, the half-rate channels are assigned to the MS only when the channel seizure ratio of underlaid subcell is very low. The calls The parameter modification use the half-rate channel even if there are has no impact on the enough full-rate channels, which Versions earlier than equipment. influences the voice quality. BSC6900 V900R011
Radio
BSC6900
GBFD113201
0~100
per cent
None
70 Cell
"TCHTRICBUSYOVERL AYTHR" and "TCHTRIBUSYUNDERLA YTHR" can be set only when "HRIUOLDRATESELALL Read & OW" is set to YES. Write
Not involved
Not involved
None
If this parameter is set to a greater value, the half-rate channels are assigned to the MS only when the channel seizure ratio of overlaid subcell is very high. Insufficient half-rate channels can be assigned to the MS. Thus, the capacity of the BSC is reduced. If this parameter is set to a smaller value, the half-rate channels are assigned to the MS only when the channel seizure ratio of overlaid subcell is very low. The calls use The parameter modification the half-rate channel even if there are has no impact on the enough full-rate channels, which Versions earlier than equipment. influences the voice quality. BSC6900 V900R011
Radio
TCLEN
BSC6900
Test code length of the signaling link. ADD By default, MTP3LNK(Optio the value is nal) 10. None
None
Interval Type 1~15 SEPERATE_PRI NCIPAL(Principal BSC), SEPERATE_SU BORDINATE(Su bordinate BSC), TOGETHER(BS C/TC Together)
1~15
None
10
MTP3 10 link
None
BSC6900
None
Transpor t
TCMODE
TC mode
BSC6900
TCMUTEDE TECTFLAG
BSC6900
ADD To specify MTP3LNK(Mand the mode of atory) TC. Whether to SET permit the GCELLSOFT(O TC mute ptional) detection ADD BTSRXUCHAIN( Mandatory) CBN BTSRXUCHAIN( Mandatory)
None
None
Enumeration Type
None
MTP3 link
None
Not involved
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
GBFD111203
O&M of BSC
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Equipme nt
TCN
BSC6900
Number of the cabinet where the tail board of the RXU ring is GBFDlocated 111202
O&M of BTS
0~62
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
TCPN
TC Port No
BSC6900
TC port No. where one end of the ATER ADD connection ATERCONPATH channel is (Mandatory) located
None
None
0~335
None None
None
Not involved
Not involved
Not involved
None
Equipme nt
TCPOOLID
TC Pool ID
BSC6900
If you enable the TC pool function when configuring the basic information of the BSC, you need to enter the TC Pool ID. The ID must be SET unique in the BSCBASIC(Man entire GBFDdatory) network. 113726 TC slot No. where one end of the ATER ADD connection ATERCONPATH channel is (Mandatory) located TC subrack No. where one end of the ATER ADD connection ATERCONPATH channel is (Mandatory) located
TC Pool
0~4095
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
TCSN
TC Slot No
BSC6900
None
None
0~5, 8~27
None None
None
Not involved
Not involved
Not involved
None
Equipme nt
TCSRN
TC Subrack No
BSC6900
None
None
0~11
None None
None
Not involved
Not involved
Not involved
None
Equipme nt
BSC6900
Input mode of the BA table. In auto mode, the system fills in the BA1 and BA2 tables based on the adjacent relation of cells. In manual mode, the user maintains the BA table. If the adjacent relation of cells is modified, for example, a neighboring cell is added or a cell is deleted, the user needs SET to maintain GCELLIDLETDD the BA1 and GBFDBA1(Mandatory) BA2 tables. 114302 Whether the FDD BA2 table is generated automatically according to the neighboring SET relation or GCELLHOTDDB typed MRFDA2(Mandatory) manually. 210301 When the priority of a TDD cell is ranked, the value of this parameter is added to the receive level of the TDD SET cell in the GCELLCCUTRA measurement GBFDNSYS(Optional) report. 114302
GSM/TDSCDMA Interoperability
Enumeration Type
AUTO(Auto), Manual(Manual)
AUTO, Manual
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
Configuration Management
Enumeration Type
AUTO(Auto), Manual(Manual)
AUTO, Manual
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GSM/TDSCDMA Interoperability
0~7, step:6
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page279of316
150682621.xls.ms_office
Security Level:
BSC6900
A TDD cell can become a candidate cell only when the average receive level of the TDD cell is greater than the TDD Cell Reselect Diversity of the serving cell. The value of this parameter corresponds to the following decibel value: 0: 1: -28 dB SET 2: -24 dB GCELLCCUTRA ... NSYS(Optional) 15: 28 dB Threshold for determining whether the MR about a TDD cell is valid. The measurement report is valid if the receive level of the TDD cell in the measurement report is greater than the value of this parameter. After the valid measurement report is filtered, the TDD cell joins in the cell prioritization. The value of this parameter SET corresponds GCELLCCUTRA to the NSYS(Optional) following This parameter specifies whether to activate the diversity mode on the SET common GCELLIDLETDD channel of a BA1(Mandatory) 3G cell.
GBFD114302
GSM/TDSCDMA Interoperability
0~15, step:4
dB
None
8 Cell
None
Not involved
Not involved
None
Radio
GBFD114302
GSM/TDSCDMA Interoperability
0~7, step:6
dB
None
0 Cell
None
Not involved
Not involved
None
Radio
TDDDIVERSI TY Diversity
BSC6900
GBFD114302
GSM/TDSCDMA Interoperability
0~1
None None
None
Cell
None
Not involved
Not involved
None
Radio
TDDDLUARF AN DL UARFAN
BSC6900
Downlink frequency of frequency 1 in table 3GBA2. This parameter indicates the detected downlink frequency in the 3G adjacent cell list in speech. The parameter is delivered in SET the system GCELLIDLETDD information GBFDBA1(Mandatory) 2QUTER/MI. 114302 This parameter specifies whether the TDD MI system information SET optimized GCELLCCUTRA function is NSYS(Optional) enabled.
GSM/TDSCDMA Interoperability
0~16383
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD114302
GSM/TDSCDMA Interoperability
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
Before switched on, please insure that all the TRXs in this cell are The parameter modification suitable has no impact on the version. equipment. None
Radio
This parameter determines whether the broadcasting of the MI SET system GCELLCCUTRA information is GBFDNSYS(Optional) prohibited. 114302 Minimum RSCP quality threshold that the TDD 3G candidate cell must GBFDreach. 114302
GSM/TDSCDMA Interoperability
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
TDDRSCPQ UALTHRSH
BSC6900
GSM/TDSCDMA Interoperability
0~63
None None
10 Cell
None
Not involved
Not involved
None
Radio
TDDSCRAM BLE
Cell Parameter ID
BSC6900
TDD cell parameter ID. The ID is used to distinguish terminals or cells. This parameter is used after spread spectrum. Therefore, it does not change the bandwidth of signals, but only distinguishes the signals from different sources. Through scrambling, multiple transceivers can use the SET same codes GCELLIDLETDD for spread GBFDBA1(Mandatory) spectrum. 114302 Cell parameter ID of a TDD cell. The cell parameter ID distinguishes between MSs or cells. It is used after spread spectrum. Therefore, it distinguishes between the signals from different sources, but not changes the bandwidth of signals. Through scrambling, multiple transceivers can use the SET same codes GCELLHOTDDB for spread MRFDA2(Mandatory) spectrum. 210301 This parameter determines whether the TDD system information SET optimized GCELLCCUTRA function is NSYS(Optional) enabled.
GSM/TDSCDMA Interoperability
0~127
None None
None
Cell
None
Not involved
Not involved
None
Radio
TDDSCRAM BLE
Cell parameter ID
BSC6900
Configuration Management
0~127
None None
None
Cell
None
Not involved
Not involved
None
Radio
GBFD114302
GSM/TDSCDMA Interoperability
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Radio
TDDSYNCC ASE
Sync Case
BSC6900
SyncCase in the TDDBA1 table. This parameter determines the synchronizati on status. Value 0 indicates Sync case 1 and value 1 indicates Sync case 2. SET This GCELLIDLETDD parameter is BA1(Mandatory) used to SET identify GCELLHOTDDB different 3G GBFDA2(Mandatory) cells. 114302
GSM/TDSCDMA Interoperability
0~1
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
None
None
0~100
per cent
20
20 None
None
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page280of316
150682621.xls.ms_office
Security Level:
None
None
0~100
per cent
15
15 None
None
Not involved
Not involved
Not involved
TDMN1
BSC6900
Each subrack has six TDM numbers, ranging from 0 to 5. Subrack 1 TDM Port No. refers to the TDM number on subrack 1 of ADD the interSRCONPATH(M subrack GBFDandatory) connection.. 111203
O&M of BSC
0~5
None None
None
TDMN2
BSC6900
Each subrack has six TDM numbers, ranging from 0 to 5. Subrack 2 TDM Port No. refers to the TDM number on subrack 2 of ADD the interSRCONPATH(M subrack GBFDandatory) connection. 111203 Terminal endpoint ID of the Pb GBFDsignaling link. 111203 Temperature MRFDalarm switch 210304
O&M of BSC
0~5
None None
None
Subrack connection path Less than 5 minutes The services are interrupted until the PBSL is working normally.
The paramete r cannot be modified. 1. The comman d is used for the configura tion when the TDM resource s exist between two subracks . 2. Each subrack must be the BM subrack or TC subrack. 1. The comman d is used for the configura tion when the TDM resource s exist between two subracks . 2. Each subrack must be the BM subrack or TC subrack.
Not involved
None
Transpor t
Equipme nt
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
TEI TEMP_MAS K
BSC6900
0~127
None
63
63 PBSL
None
BSC6900
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
BSC6900
CLOSE, OPEN
None
None
None
Not involved
Not involved
None
Upper Limit of TEMP_THD_ Temperature HIGH Alarm Lower Limit of TEMP_THD_ Temperature LOW Alarm
BSC6900
ADD EMU(Optional)
Faulty Management
String Type
None
1~9 characters
45 None
None
None
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Lower limit of MRFDtemperature 210304 When the environment temperature of the APMU is greater than the value of this parameter, the BTS reports an alarm. For the APMU of the nonAPM4815 type, the minimum value of the parameter is 490. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another MRFDmode. 210304
Faulty Management
String Type
None
1~9 characters
0 None
None
None
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
500 BTS
This parameter must be at least 3C greater than "Lower ENV TEMP Alarm".
Not involved
Not involved
None
Equipme nt
BSC6900
When the environment temperature is greater than the value of this parameter, the BTS reports an alarm. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another MRFDptional) mode. 210304 When the environment temperature of the APMU is less than the value of this parameter, the BTS reports an alarm. For the APMU of the nonAPM4815 type, the maximum value of the parameter is 990. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another MRFDmode. 210304
Faulty Management
500 BTS
This parameter must be at least 4C greater than "Lower ENV TEMP Alarm".
Not involved
Not involved
None
Equipme nt
Faulty Management
If "APMU Board Type" is "APM200E", the recommended value is "-100". For other types of APMU boards, the recommended value is "0".
BTS
This parameter must be at least 3C lower than "Upper ENV TEMP Alarm".
Not involved
Not involved
None
Equipme nt
TEMPCOMP ENSATECO Coefficient of EF tempCompensation BSC6900 TEMPLATED Cell Template ESC Description
BSC6900
When the environment temperature is less than the value of this parameter, the BTS reports an alarm. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another ptional) mode. Change value of the floating charge voltage of the storage battery when the temperature of the storage battery SET changes by 1 BTSDPMUBP(O degree ptional) Celsius. SAV Description GCELLTEMPLA of a cell TE(Optional) template.
MRFD210304
Faulty Management
0 BTS
This parameter must be at least 4C lower than "Upper ENV TEMP Alarm".
Not involved
Not involved
None
Equipme nt
GBFD111202 MRFD210301
mV
None
800 BTS
None
Not involved
Not involved
None
String Type
None
1~64 characters
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
BSC6900 V900R011
Radio
TEMPLATEI D
BSC6900
This parameter specifies the index number of a cell template. Each template is EXP numbered GCELLTEMPLA uniquely in a TE(Mandatory) BSC. None This parameter specifies the index number of a cell template. Each template is SAV numbered GCELLTEMPLA uniquely in a TE(Optional) BSC. None
None
1~65535
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
TEMPLATEI D
BSC6900
None
32768~65535
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
6/9/2013
Page281of316
150682621.xls.ms_office
Security Level:
BSC6900
ADD GCELL(Optional ) ADD GCELLQUICKS ETUP(Optional) ADD BTSAUTOPLAN( Optional) EXP GCELLTEMPLA TE(Mandatory) SAV GCELLTEMPLA TE(Mandatory)
Name of a cell template, uniquely identifying a cell template in a BSC. None When the temperature of the BTS cabinet is greater than the value of this parameter, the TRX is GBFDpowered off. 111202 TRX poweroff temperature threshold. If the temperature of the BTS cabinet is less than the value of this parameter while "Low Temperature Startup Allowed" is set to "Yes", the TRX is GBFDpowered off. 111202
None
String Type
None
1~64 characters
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
O&M of BTS
50~70
65 BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
O&M of BTS
For APM4815 boards, the value of this parameter is always "-1". For other types of APMU boards, the recommended value is "-100". BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
TRX poweroff temperature threshold. If the temperature of the BTS cabinet is less than the value of this parameter while "Low Temperature Startup Allowed" is set to "Yes", the TRX is powered off. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDPMUBP(O in another GBFDptional) mode. 111202 Whether the System Information Type 3 SET message OTHSOFTPARA carries TER (Optional) indication. Duration of the timer for starting the IP path SET status test on BSCNSPARA(O the Gb ptional) interface. Content of ADD the cell GSMSCB(Mand broadcast atory) message AEC is an important measure to improve the speech quality. If the AEC works for a consecutive time that is longer than the value of this parameter, the TFO function is closed to provide a SET better TCPARA(Option speech al) quality.
O&M of BTS
-100 BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD111101
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
YES
BSC69 00 None
Not involved
Not involved
None
Radio
BSC6900
GBFD119001
Gb Interface Function
1~255
None
30 BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
TEXT
Content of message
BSC6900
GBFD113602
Any Type
None
1~2462 characters
None None
None
Cell
None
Not involved
Not involved
None
Radio
TFOOptSwit ch
GBFD115701
TFO
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
OFF
Board
None
Not involved
Not involved
None
If both TFO and AEC functions are enabled and the acoustic echo is detected, the TFO is disabled to cancel the echo so that the speech quality can be improved.
BSC6900 V900R011
Equipme nt
TFREQ
Test Frequency
BSC6900
In the VSWR test, the TRX transmits signals at a default frequency. You can specify the frequency used for the GBFDtest. 111207
0~1023
None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
This parameter indicates start frame number of the BTS. It is used to keep synchronizati on between the BTS and SET MS after the GCELLOTHEXT( BTS is reMRFDOptional) initialized. 210301 SWP OMUAREA(Man GBFDdatory) Target OMU 111203 ADD TGWIP(Mandato ry) TGW ID. None
Configuration Management
TG
Target OMU
BSC6900
O&M of BSC
None None
None
Cell
None
Not involved
Not involved
For the BTS3001 C, BTS3001 CP, and BTS3002 C, this paramete r is invalid. For other BTSs, this The parameter modification paramete has no impact on the r is valid. equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt Equipme nt
TGWID
TGW ID
BSC6900
None
0~255
None None
None
BSC69 00 None
Not involved
Not involved
BSC6900
This parameter indicates the address of the operation and ADD maintenance TGWIP(Mandato console for ry) TGW. None
None
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
BSC6900
This parameter indicates the mask of the operation and ADD maintenance TGWIP(Mandato console for ry) TGW.
None
None
IP Address Type
None
None
BSC69 00 None
Not involved
Not involved
None The IP address of the TGW cannot use the configure d IP address of another TGW . The IP address of TGW cannot be the same as the IP address configure d in the BSC. Otherwis e, operation and maintena nce channel for TGW fails. The IP address of the TGW cannot use the configure d IP address of another TGW. The IP address of TGW cannot be the same as the IP address configure d in the BSC. Otherwis e, operation and maintena nce channel for TGW fails.
BSC6900 V900R011
BSC6900 V900R011
Transpor t
BSC6900 V900R011
Transpor t
6/9/2013
Page282of316
150682621.xls.ms_office
Security Level:
BSC6900
Slot number of the BSC interface ADD board TGWIP(Mandato interworking ry) with TGW.
None
None
0~5, 8~27
None None
None
None
None
Not involved
Not involved
BSC6900
TH
Th
BSC6900
Subrack number of the BSC interface ADD board TGWIP(Mandato interworking ry) with TGW. None Timer Th. After receiving the MS flow control message, the SGSN uses the values of the updated Bmax and R based on the interval set by this timer. When this parameter is set to a smaller value, the SGSN can use the flow control parameter in a shorter time. In this way, the data can be transferred according to the most suitable flow control SET parameters, BSSGPPARA(O which can GBFDptional) improve the 114101 Voltage threshold for switching off the air conditioner. If the power supply voltage is less than this threshold, the air conditioner needs to be switched off SET to decrease BTSAIRCON(Op the impact on tional) the BTS. Voltage threshold for switching on the air conditioner. This parameter assumes that the air conditioner is switched off. If the power supply voltage is greater than this threshold, the air conditioner needs to be switched on to ensure SET that the BTS BTSAIRCON(Op runs tional) properly. Combination of the THP1 and ARP1 priority in the Interactive service. THP1-ARP1 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling Optional) priority. Combination of the THP1 and ARP2 priority in the Interactive service. THP1-ARP2 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling Optional) priority. Combination of the THP1 and ARP3 priority in the Interactive service. THP1-ARP3 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling Optional) priority. Combination of the THP2 and ARP1 priority in the Interactive service. THP2-ARP1 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling Optional) priority. Combination of the THP2 and ARP2 priority in the Interactive service. THP2-ARP2 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling Optional) priority. Combination of the THP2 and ARP3 priority in the Interactive service. THP2-ARP3 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling Optional) priority.
None
0~11
None None
None
BSC69 00 None
Not involved
Not involved
None The IP address of the TGW cannot use the configure d IP address of another TGW . The IP address of TGW cannot be the same as the IP address configure d in the BSC. Otherwis e, operation and maintena nce channel for TGW fails.
BSC6900 V900R011
Equipme nt
BSC6900 V900R011
Equipme nt
GPRS
5000~60000
ms
None
5000 BSC
None
Not involved
Not involved
None
Equipme nt
THDOFF
BSC6900
GBFD111202
O&M of BTS
220~280
None
264 BTS
None
Not involved
Not involved
This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
THDON
BSC6900
GBFD111202
O&M of BTS
220~280
None
264 BTS
None
Not involved
Not involved
This paramete r is supporte d only by the BTS3012 A and The parameter modification BTS3006 has no impact on the A. equipment. None
Equipme nt
BSC6900
GBFD119902
1~10
None None
10 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD119902
1~10
None None
6 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD119902
1~10
None None
4 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD119902
1~10
None None
8 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD119902
1~10
None None
4 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD119902
1~10
None None
3 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page283of316
150682621.xls.ms_office
Security Level:
BSC6900
BSC6900
BSC6900
Combination of the THP3 and ARP1 priority in the Interactive service. THP3-ARP1 priority weight determines the number of the budget blocks and the block scheduling priority. Combination of the THP3 and ARP2 priority in the Interactive service. THP3-ARP2 priority weight determines the number of the budget blocks and the block scheduling priority. Combination of the THP3 and ARP3 priority in the Interactive service. THP3-ARP3 priority weight determines the number of the budget blocks and the block scheduling priority.
GBFD119902
1~10
None None
6 Cell
None
Not involved
Not involved
None
Radio
GBFD119902
1~10
None None
3 Cell
None
Not involved
Not involved
None
Radio
GBFD119902
1~10
None None
2 Cell
None
Not involved
Not involved
None
Radio
THTYPE
Threshold type
BSC6900
Load balance threshold type. It indicates the ADD threshold TRMLOADTH(M calculation andatory) mode. None This parameter specifies the timer set to wait for a private SET message BSCTMR(Option from the al) SGSN. During channel assignment, the assignment of channels on the BCCH TRXs depends on the uplink receive level, quality, and non-BCCH load. The TCHs are preferentially assigned on the BCCH TRXs if the following conditions are met: 1. The uplink receive level after filtering is higher than "Level Thresh. for Assigning Main BCCH Carrier SET Channel GCELLCHMGA Under TIGHT D(Optional) BCCH". During channel assignment, the assignment of channels on the BCCH TRXs depends on the uplink receive level, quality, and non-BCCH load. The TCHs are preferentially assigned on the BCCH TRXs if the following conditions are met: 1. The uplink receive level after filtering is higher than "Level Thresh. for Assigning Main BCCH Carrier SET Channel GCELLCHMGA Under TIGHT D(Optional) BCCH".
None
Enumeration Type
None None
None
Not involved
Not involved
Not involved
None
Transpor t
GBFD119701
SGSN Pool
1~15
min
BSC69 5 00 None
Not involved
Not involved
None
Equipme nt
TIGHTBCCH Level Thresh. for ASSMAINBC Assgn BCCH Udr CHLEV TBCCH
BSC6900
GBFD118001
0~63
dB
None
30 Cell
This parameter is valid only when "TIGHTBCCHSWITCH" in "SET GCELLCHMGBASIC" is set to ON.
Not involved
Not involved
None
If this parameter is set to a greater value, the BCCH may idle while non-BCCHs are congested, thus affecting the traffic volume during busy times. If this parameter is set to a smaller value, The parameter modification the assignment of the BCCH may fail, and has no impact on the thus the access success rate may be Versions earlier than equipment. decreased. BSC6900 V900R011
Radio
TIGHTBCCH Quality Thresh. for ASSMAINBC Assgn BCCH Udr CHQUAL TBCCH BSC6900
GBFD118001
0~7
None None
1 Cell
This parameter is valid only when "TIGHTBCCHSWITCH" in "SET GCELLCHMGBASIC" is set to ON.
Not involved
Not involved
None
If this parameter is set to a greater value, the assignment of the BCCH may fail, and thus the handover success rate may be decreased. If this parameter is set to a smaller value, The parameter modification the BCCH may idle while non-BCCHs are has no impact on the congested, thus affecting the traffic Versions earlier than equipment. volume during busy times. BSC6900 V900R011
Radio
BSC6900
The P/N criterion must be met for triggering a TIGHT BCCH handover. That is, the TIGHT BCCH handover can be triggered only if P seconds among N seconds meet the triggering conditions. This parameter SET corresponds GCELLHOBASI to P in the GBFDC(Optional) P/N criterion. 118001 uring channel assignment, the assignment of channels on the BCCH TRXs depends on the uplink receive level, quality, and non-BCCH load. he TCHs are preferentially assigned on the BCCH TRXs if the following conditions are met: 1. The uplink receive level after filtering is higher than "Level Thresh. for Assigning Main BCCH Carrier Channel SET Under TIGHT GCELLHOAD(O BCCH". GBFDptional) 2. The uplink 118001 The P/N criterion must be met for triggering a TIGHTBCCH handover. That is, the TIGHTBCCH handover can be triggered only if P seconds among N seconds meet the triggering conditions. This parameter corresponds to N in the GBFDP/N criterion. 118001
0~16
None
2 Cell
This parameter is valid only when "TIGHTBCCHSWITCH" in "SET GCELLCHMGBASIC" is set to ON. The following condition must be met: "TIGHTBCCHHOSTATTI ME" >= "TIGHTBCCHHOLASTTI Read & ME". Write
Not involved
Not involved
None
If this parameter is set to a greater value, the BCCH may idle while non-BCCHs are congested, thus affecting the traffic volume during busy times and the access success rate. If this parameter is set to a smaller value, The parameter modification unnecessary handovers may be has no impact on the performed, thus the voice quality is equipment. decreased. BSC6900 V900R011
Radio
0~100
per cent
None
80 Cell
This parameter is valid only when "TIGHTBCCHSWITCH" in "SET GCELLCHMGBASIC" is set to ON.
Not involved
Not involved
None
Radio
BSC6900
0~16
None
3 Cell
This parameter is valid only when "TIGHTBCCHSWITCH" in "SET GCELLCHMGBASIC" is set to ON. The following condition must be met: "TIGHTBCCHHOSTATTI ME" >= "TIGHTBCCHHOLASTTI Read & ME". Write
Not involved
Not involved
None
Radio
6/9/2013
Page284of316
150682621.xls.ms_office
Security Level:
BSC6900
When an intra-cell TIGHT BCCH handover needs to be performed (handover from the nonBCCH to BCCH), the downlink receive quality must be smaller SET than the GCELLHOAD(O value of this GBFDptional) parameter. 118001 Whether to enable the BCCH aggressive SET frequency GCELLCHMGBA reuse SIC(Optional) algorithm. If the SDCCH load on the TRXs of the compatible BCCH in loose frequency reuse pattern is greater than the "IBCA Loose Trx SDCCH Load Threshold", and when the uplink receive level from the MS to the BTS is greater than the threshold, the SDCCHs on the TRXs of the compatible non-BCCH are preferentially assigned. Otherwise, the SDCCHs SET on the TRXs GCELLCHMGA of the D(Optional) compatible IMSI paging timer. After enabling the MSC pool function, the BSC receives from the MSC the paging message attached with the IMSI. Then, the BSC records the relation between the IMSI and the MSC SP and starts the timer with predefined length. If the BSC receives a response message with the IMSI before the timer expires, the BSC locates the ADD destination GCNOPERATO MSC based R(Optional) on the IMSI Whether to limit the operation ADD time of the OP(Optional) operator The time long SET of the FACFG(Mandato parameter to ry) be set. SET TIME(Optional) Time SET Duration of GCELLFREQSC frequency AN(Optional) scanning Within the preset time, no AMR FRto-HR handover is allowed if the previous FRto-HR handover fails due to channel SET unavailability GCELLHOFITPE or channel N(Optional) mismatch. After a handovr due to bad quality is successful, the penalty on the original serving cell is performed within the "Penalty Time after BQ HO": the receive level of the original serving cell is decreased by "Penalty Level after BQ HO", to SET prevent pingGCELLHOFITPE pong N(Optional) handovers.
0~7
None None
3 Cell
This parameter is valid only when "TIGHTBCCHSWITCH" in "SET GCELLCHMGBASIC" is set to ON.
Not involved
Not involved
BSC6900
GBFD118001
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
The parameter modification has no impact on the None equipment. None Multiband networks cannot use the TIGHT BCCH The parameter modification algorithm has no impact on the . equipment. None
Radio
Radio
BSC6900
GBFD117002
0~63
dB
None
40 Cell
None
Not involved
Not involved
None
Radio
TIIMSIPAGI NG
MSC Pool
3~15
Not involved
Not involved
None
Radio
TIME
Time Limit
BSC6900
Enumeration Type
NOLIMIT, LIMIT
None NOLIMIT
No Limit
RNC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None Not involved None The parameter modification has no impact on the equipment. None
Equipme nt
TIME TIME
BSC6900 BSC6900
1~15 00:00:00~23:59:59
min
None
None None
RNC RNC
None None
None None
None None
TIME
Duration
BSC6900
0, 5~1440
min
None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
BSC6900
GBFD110601 GBFD510501
0~255
None
10 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, cell congestion may be difficult to be relieved, thus affecting the traffic volume during busy times and the access success The parameter modification rate. If this parameter is set to a smaller has no impact on the value, handover success rate may be Versions earlier than equipment. decreased. BSC6900 V900R011
Radio
BSC6900
GBFD110601 GBFD510501
0~255
None
10 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, it is difficult for the MS to be handed over to the original cell, thus leading to call drop when there is no suitable neighboring cell. If this parameter is set to a smaller The parameter modification value, the MS is likely to be handed over has no impact on the to the original cell again, thus leading to Versions earlier than equipment. ping-pong handovers. BSC6900 V900R011
Radio
BSC6900
After an OL subcell to UL subcell handover of an MS fails, the MS does not perform OL subell-UL subcell handovers within the value of the GBFDparameter. 113201 Indicates the timeout time of the PING packet None
0~255
None
10 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
If this parameter is set to a greater value, call drop rate may be increased and congestion may occur in the overlaid The parameter modification subcell; if this parameter is set to a has no impact on the smaller value, handover success rate may Versions earlier than equipment. be decreased. BSC6900 V900R011
Radio
TIMEOUT
Reply TimeOut[ms]
BSC6900
PING IP(Optional)
None
200~10000
ms
2000
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
TIMEOUT
Reply TimeOut[ms]
BSC6900
Timeout time for waiting for the TRC TRACERT IPADDR(Optiona packet l) response None PING MAC(Optional) PING BTSCFM(Option al) Timeout time None TRC MAC(Optional) TRC BTSCFM(Option al) Indicates the timeout time of the CFM link tracing detection None
None
1~65535
ms
3000
3000 None
None
Not involved
Not involved
Not involved
None
Transpor t
Timeout
Time Out
BSC6900
None
1~3
Not involved
Not involved
Not involved
None
Transpor t
TIMEOUT
Time Out
BSC6900
None
1~10
Not involved
Not involved
Not involved
None
Transpor t
TIMEOUT
Time Out
BSC6900
Longest waiting time for multiplexing When the multiplexed packet is no longer added with new data and the timer expires, the multiplexed packet is transmitted directly. This parameter is determined by the number of multiplexed packets. When the number of multiplexed packets increases, the value of ADD this BTSABISMUXFL parameter GBFDOW(Optional) increases. 118604
Abis MUX
ms
200
200 BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page285of316
150682621.xls.ms_office
Security Level:
BSC6900
After the fast handover is successful, the penalty on the original serving cell is performed within the "Quick handover punish time": the receive level of the original serving cell is decreased ADD by "Quick GEXT2GCELL( handover Optional) punish value", SET to prevent GCELLHOFAST( ping-pong Optional) handovers.
GBFD110601 GBFD510501
0~255
None
10 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, it is difficult for the MS to be handed over to the original cell, thus leading to call drop when there is no suitable neighboring cell. If this parameter is set to a smaller The parameter modification value, the MS is likely to be handed over has no impact on the to the original cell again, thus leading to Versions earlier than equipment. ping-pong handovers. BSC6900 V900R011
Radio
TIMES
BSC6900
Max times to restore SET interface FACFG(Mandato board per MRFDry) day. 210304 Indicates the times of sending PING packets None
Faulty Management
0~5
None None
None
RNC
None
Not involved
Not involved
Not Involved
None
Equipme nt
TIMES
BSC6900
PING IP(Optional)
None
1~1024
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
This parameter determines whether the dynamic voltage adjustment function is enabled on SET the basis of GCELLBASICPA the number RA(Optional) of timeslots.
GBFD111606
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
After the time advancing handover is successful, the penalty on the original serving cell is performed within the "Penalty Time after TA HO": the receive level of the original serving cell is decreased by "Penalty Level after TA HO", to GBFDSET prevent ping- 110601 GCELLHOFITPE pong GBFDN(Optional) handovers. 510501 After an UL subcell to OL subcell handover of an MS fails, the MS does not perform UL subcell to OL subcell handovers within the value of the GBFDparameter. 113201
0~255
None
30 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, it is difficult for the MS to be handed over to the original cell, thus leading to call drop when there is no suitable neighboring cell. If this parameter is set to a smaller The parameter modification value, the MS is likely to be handed over has no impact on the to the original cell again, thus leading to Versions earlier than equipment. ping-pong handovers. BSC6900 V900R011
Radio
BSC6900
10~255
None
40 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the underlaid The parameter modification subcell; if this parameter is set to a has no impact on the smaller value, handover success rate may Versions earlier than equipment. be decreased. BSC6900 V900R011
Radio
TIQUEUING TIMER
T11
BSC6900
This parameter indicates the queue timer for assignment. When the BSC receives an assignment request and no channel is available for assignment, the BSC starts the queuing procedure and the timer. If the channel request is successful before the timer expires, the timer stops. If the timer expires, SET the channel GCELLTMR(Opt assignment GBFDional) fails. 111005 If the BSC receives the configuration data about all the connected MSCs before the timer expires, the BSC concludes ADD that the GCNOPERATO configuration R(Optional) data is valid. When the operation time of the OMU exceeds the value specified by this parameter, some records are SET deleted from LOGLIMIT(Optio the operation nal) log. SET MSTOCELL(Ma ndatory) TST SNDRSI(Mandat ory) TST UPDMSRAC(Ma ndatory)
1~30
None
8 Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD117401
MSC Pool
1~15
min
Not involved
Not involved
None
Radio
TL
Time Limit[Days]
BSC6900
GBFD111203 MRFD210305
7~365
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
TLLI
TLLI
BSC6900
GPRS
0~4294967295
None None
None
This parameter is valid Subsys only when "IDXTYPE" is tem set to BYTLLI.
Not involved
Not involved
Not involved
None
Equipme nt
TLT
Tout Limit
BSC6900
Lowest expected value of the air outlet temperature. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDHEUBP(Op in another GBFDtional) mode. 111202 Temperature alarm lower threshold. If the temperature of the battery is lower than the value of this parameter, an alarm indicating the abnormal temperature is reported. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202
O&M of BTS
-99~70
45 BTS
None
Not involved
Not involved
None
Equipme nt
TLTHD
BSC6900
O&M of BTS
-19~5
If "APMU Board Type" is "EPS4815", the recommended value is "0". For other types of APMU boards, the recommended value is "-10". BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page286of316
150682621.xls.ms_office
Security Level:
TLTHD
BSC6900
When the internal temperature of the BTS reaches the Temperature Alarm Lower Threshold, it reports a low temperature alarm. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDHEUBP(Op in another GBFDtional) mode. 111202 When the time mode is set to "ONTIME", ADD you should SUBTSK(Mandat set this ory) parameter. If the time mode is set to "DAILY_T", "WEEKLY_T ", or "MONTHLY_ T", you should set this parameter. This parameter specifies the first execution time in the day in which the ADD scheduled SUBTSK(Mandat task is ory) executed. If the time mode is set to "DAILY_T", "WEEKLY_T ", or "MONTHLY_ T", you should set this parameter. This parameter specifies the second execution time in the day in which the ADD scheduled SUBTSK(Option task is al) executed. If the time mode is set to "DAILY_T", "WEEKLY_T ", or "MONTHLY_ T", you should set this parameter. This parameter specifies the third execution time in the day in which the ADD scheduled SUBTSK(Option task is al) executed. If the time mode is set to "DAILY_T", "WEEKLY_T ", or "MONTHLY_ T", you should set this parameter. This parameter specifies the fourth execution time in the day in which the ADD scheduled SUBTSK(Option task is al) executed. If the time mode is set to "DAILY_T", "WEEKLY_T ", or "MONTHLY_ T", you should set this parameter. This parameter specifies the fifth execution time in the day in which ADD the SUBTSK(Option scheduled al) task is
O&M of BTS
-99~99
-20 BTS
The value of this parameter must be at least two degrees smaller than "Temperature Alarm Upper Threshold".
Not involved
Not involved
None
Equipme nt
TM
Execute Time
BSC6900
GBFD111203
O&M of BSC
Compound Type
hour, min
00:00~23:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
TM1
Execute Time 1
BSC6900
GBFD111203
O&M of BSC
Compound Type
hour, min
00:00~23:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
TM2
Execute Time 2
BSC6900
GBFD111203
O&M of BSC
Compound Type
hour, min
00:00~23:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
TM3
Execute Time 3
BSC6900
GBFD111203
O&M of BSC
Compound Type
hour, min
00:00~23:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
TM4
Execute Time 4
BSC6900
GBFD111203
O&M of BSC
Compound Type
hour, min
00:00~23:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
TM5
Execute Time 5
BSC6900
GBFD111203
O&M of BSC
Compound Type
hour, min
00:00~23:59
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
TMI
TRMMAP ID
BSC6900
None
None
13~163
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
TMIBRZ
BSC6900
TRMMAP index used by the ADD current ADJMAP(Manda adjacent tory) node Gold user TRMMAP index used by the ADD current ADJMAP(Manda adjacent tory) node Silver user TRMMAP index used by the ADD current ADJMAP(Manda adjacent tory) node STR FRPORTLOOP( Loopback Mandatory) time length. STR BTSVSWRTST( Optional) Test mode
None
None
0~163
None None
None
The TRMMAP index is configured by setting the Adjace value of "TMI" in "ADD Read & nt node TRMMAP". Write
Not involved
Not involved
The TRMMA P must be The parameter modification configure has no impact on the d. equipment. None The TRMMA P must be The parameter modification configure has no impact on the d. equipment. None The TRMMA P must be The parameter modification configure has no impact on the d. equipment. None The parameter modification has no impact on the None equipment. None The parameter modification has no impact on the None equipment. None
Transpor t
TMIGLD
BSC6900
None
None
0~163
None None
None
The TRMMAP index is configured by setting the Adjace value of "TMI" in "ADD Read & nt node TRMMAP". Write
Not involved
Not involved
Transpor t
TMISLV
BSC6900
None
0~163
None None
None
The TRMMAP index is configured by setting the Adjace value of "TMI" in "ADD Read & nt node TRMMAP". Write Read & Write Read & Write
Not involved
Not involved
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
TMLEN
Time Length
BSC6900
1~120
min
None
None
BC
None
Not involved
Not involved
TMODE
Test Mode
BSC6900
None None
None
None
None
Not involved
Not involved
BSC6900 V900R011
BSC6900
Duration time for determining that a call is hung up because of GBFDpoor quality 110501 Maximum rate of the accumulated alarm blink duration to the alarm blink measurement period. Assume this threshold is not 0. When the rate of accumulated alarm blink duration exceeds the threshold, an alarm is reported. For querying the alarm blink measurement period, see "LST ALMBLKSW" . For setting the alarm blink measurement period, see "SET ALMBLKSW" MRFD. 210304
Call Control
2~4
None
3 Cell
None
Not involved
Not involved
Faulty Management
0~100
per cent
None
None
BSC69 00 None
Not involved
Not involved
The parameter modification has no impact on the None equipment. None 1. If you set "Upper time threshold of raised fault" and "Lower time threshold of raised fault" to "0", the accumula ted alarm blink duration is counted but not reported. 2. If "Upper time threshold of raised fault" is not "0", the value of "Lower time The parameter modification threshold has no impact on the of raised equipment. None
Radio
BSC6900 V900R011
Equipme nt
6/9/2013
Page287of316
150682621.xls.ms_office
Security Level:
TMSI
TMSI
BSC6900
TMSI of the GBFDMS 111203 Minimum rate of the accumulated alarm blink duration to the alarm blink measurement period. Assume this threshold is not 0. When the rate of accumulated alarm blink duration is lower than the threshold, an alarm is reported. For querying the alarm blink measurement period, see "LST ALMBLKSW" . For setting the alarm blink measurement period, see "SET ALMBLKSW" MRFD. 210304
O&M of BSC
0~4294967295
None None
None
BSC69 00 None
Not involved
Not involved
Faulty Management
0~100
per cent
None
None
BSC69 00 None
Not involved
Not involved
The parameter modification has no impact on the None equipment. None 1. If you set "Upper time threshold of raised fault" and "Lower time threshold of raised fault" to "0", the accumula ted alarm blink duration is counted but not reported. 2. If "Upper time threshold of raised fault" is not "0", the value of "Lower time The parameter modification threshold has no impact on the of raised equipment. None
Radio
BSC6900 V900R011
Equipme nt
TMT1TMR
BSC6900
This timer is a protection timer waiting for a signalling link test acknowledge ment message (SLTA) from the peer end after a signalling link test message SET (SLTM) is MTP3TMR(Optio sent to the nal) peer end. None This timer is used to send the signalling link test messages SET (SLTM) to MTP3TMR(Optio the peer end nal) regularly. None
None
8000~12000
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
TMT2TMR
BSC6900
None
TNAME
Data Table
BSC6900
TNMODE
Transmission Mode
BSC6900
TNMODE
Transmission Mode
BSC6900
name of the CMP data table TBLDATA(Mand distributed on atory) the board. E1 transmission type of the Pb interface. The terrestrial transmission or satellite transmission can be selected. In the areas such as desert and lake where the terrestrial transmission is difficult, ADD the satellite PBE1T1(Optiona transmission l) can be used. The Ater signaling link operates in the terrestrial transmission or satellite transmission mode. In the areas such as desert and lake where the ADD terrestrial ATERSL(Option transmission al) is difficult, ADD the satellite ATERCONSL(O transmission ptional) can be used.
MRFD210301
Configuration Management
Interval Type 30000~90000 30000~90000 ABLMSGTYPEP ARAS, ACALGOPARAS , ADMCTLPARAS, AICH, AMRCSQICOUN TPARAS, APN, BCH, CBSADDR, CBSCELLSAC, CELLACCESSC LASSBARREDLI ST, CELLACCESSR ESTRICT, CELLACCESSR ESTRICTBARRE DPARA, CELLACTTIMEO FFSET, CELLAMRCPAR AS, CELLAMRCWBP ARAS, CELLBASICINF O, CELLBCCHMOD TIME, CELLBINDINFO, CELLCACLOAD BALANCINGPAR A, Enumeration CELLCACPARA, Type CELLCBSDRXIN 0~276
ms
None
None
MTP3 link
None
Not involved
Not involved
None
Transpor t
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
GBFD111203
O&M of BSC
Enumeration Type
None None
None
PBE1T 1 None
Not involved
Not involved
None
Equipme nt
GBFD113903
Enumeration Type
None TRRS
TRRS
ATER CONS L
None
Not involved
Not involved
None
Transpor t
TO
AdjustMethod
BSC6900
SET TZ(Mandatory)
Offset to DST, namely, the adjustment to MRFDtime. 210301 Cell Reselect Temporary Offset (TO) indicates the temporary correction of C2. This parameter is valid only within the value specified by "Cell reselect penalty time". For details, see GSM Rec. 05.08 and 04.08. This parameter applies to only GSM Phase II GBFDMSs. 110402 Number of the cabinet where the board is located Number of the slot where the board is located Number of the subrack where the board is located
Configuration Management
-120~-1, 1~120
min
None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
TO
BSC6900
0~7
None None
None
Cell
None
Not involved
Not involved
None
Radio
BSC6900
MRFD211501
IP-Based 2G/3G CoTransmission on Base Station Side Interval Type 0~62 IP-Based 2G/3G CoTransmission on Base Station Side Interval Type 0~23 IP-Based 2G/3G CoTransmission on Base Station Side Interval Type 0~254
0~62
None None
None
BTS
None
Not involved
Not involved
None
Radio
BSC6900
MRFD211501
0~23
None None
None
BTS
None
Not involved
Not involved
None
Radio
BSC6900
MRFD211501
0~254
None None
None
BTS
None
Not involved
Not involved
None
Radio
6/9/2013
Page288of316
150682621.xls.ms_office
Security Level:
TP
Log Type
BSC6900
Type of the host log to be collected. If this parameter is set to NORMAL, the text log in the \common\fam \famlog directory of the OMU installation path is collected and saved in the \common\fam \famlog directory of the OMU installation path. If this parameter is set to FORMAT, the binary log in the \common\fam \famlogfmt directory of the OMU GBFDinstallation 111203
O&M of BSC
Enumeration Type
None
BSC69 00 None
Not involved
Not involved
None.
Equipme nt
TPN
BSC6900
TQHO
The number of the optical port of the tail board in the RXU ring. Length of the timer that is started to wait for a channel requested by an incoming BSC handover request message. When the MSC allows the queuing of incoming BSC handover requests, the BSC starts the queuing procedure and the timer if no channel is available for assignment. If the channel request is successful before the timer expires, SET the timer GCELLTMR(Opt stops. If the ional) timer expires,
GBFD111202
O&M of BTS
0~5
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
GBFD110601 GBFD510501
1~30
None
8 Cell
None
Not involved
Not involved
None
Radio
BSC6900
CPU usage threshold for debugging tracing flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, debugging SET tracing flow FCCPUTHD(Opti control is WRFDonal) triggered. 040100 Packet queue usage threshold for debugging tracing flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, debugging tracing flow control is triggered. CPU usage threshold for recovery from debugging tracing flow control. When the average CPU usage of smooth windows is lower than the threshold, debugging tracing flow control is stopped. Packet queue usage threshold for recovery from debugging tracing flow control. When the average packet queue usage of smooth windows is lower than the threshold, debugging tracing flow control is stopped. Whether to control the debugging tracing flow Threshold for determining whether the downlink service is perferred. Within the period specified by "Flow Count Period Ticks", if the length of the downlink LLC PDU received by the BSC from the SGSN higher than the threshold, the service type of the MS is downlink preferred. Threshold for determining whether the uplink service is preferred. Within the period specified by "Flow Count Period Ticks", if the length of the uplink LLC PDU received by the BSC from the MS higher than the threshold, the service type of the MS is uplink preferred.
Flow Control
30~100
per cent
None
60 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
67 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
50 Board
None
Not involved
Not involved
None
Equipme nt
BSC6900
WRFD040100
Flow Control
30~100
per cent
None
62 Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
TRACESW
BSC6900
SET FCSW(Optional)
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None None
ON
Board
None
Not involved
Not involved
None
Equipme nt
GBFD119501
1~255
None None
5 BSC
None
Not involved
Not involved
None
Radio
GBFD119501
1~255
None None
5 BSC
None
Not involved
Not involved
None
Radio
6/9/2013
Page289of316
150682621.xls.ms_office
Security Level:
TRAMODE
Traffic mode
BSC6900
Traffic mode of the M3UA link set. At present, only the active/standb y and load sharing mode is available. For the description of the two ADD modes, see M3LKS(Optional the ) RFC4666. None Mode of the transmission between the BTS and the BSC. The terrestrial transmission has a short delay while the satellite SET transmission BTSTRANS(Man has a long datory) delay.
None
Enumeration Type
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
TransMode
Transmission Mode
BSC6900
GBFD113901
Enumeration Type
TER_TRANS(Ter restrial Transmission), SAT_TRANS(Sat ellite Transmission), TER_AND_SAT_ TRANS(Terrestri al and Satellite)
None None
None
BTS
None
BTS
None
Transpor t
TRANSSN
BSC6900
O&M of BSC
0~27
None None
None
None
None
Not involved
Not involved
Not involved
None
BSC6900 V900R011
Transpor t
TRANST
Transport Type
BSC6900
TRANST
Transport Type
BSC6900
The transport type ATM_IP indicates that the adjacent node supports the ADD dual stack of ADJNODE(Mand the ATM and atory) IP. None Transport type of the adjacent node to which the path belongs. The parameter is valid only in the case of the ADD transmission IPPATH(Optional over the Iub ) interface. None Transport type of the adjacent ADD node and ADJMAP(Manda interface tory) type
None
Enumeration Type
ATM(ATM), IP(IP), ATM_IP(ATM and IP), HYBRID_IP(HYB ATM, IP, ATM_IP, RID IP) HYBRID_IP
None None
None
When the value of "NODET" in "ADD ADJNODE" is set to IUB, Adjace IUR, IUCS, or IUPS, this Read & nt node parameter is valid. Write
Not involved
Not involved
Not involved
None
Transpor t
None
Enumeration Type
IP(IP), HYBRID_IP(HYB RID IP) IP, HYBRID_IP ATM(ATM), IP(IP), ATM_IP(ATM and IP), HYBRID_IP(HYB ATM, IP, ATM_IP, RID IP) HYBRID_IP ATM, IP, ATM_IP, HYBRID_IP, HDLC
None None
None
IP path None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
TRANST
BSC6900
GBFD111601
Enumeration Type
None None
None
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB_IUR_IUCS, this Read & 00 parameter is valid. Write When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB, IUR or IUCS, this Read & 00 parameter is valid. Write When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB, IUR or IUCS, this Read & 00 parameter is valid. Write
Not involved
Not involved
Not involved
None
Transpor t
TRANST
Transport Type
BSC6900
None
None
Enumeration Type
None None
None
Not involved
Not involved
Not involved
None
Transpor t
TRANST
Transport Type
BSC6900
None
None
Enumeration Type
None None
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
TRANSTYPE TRANSTYPE
BSC6900
SET Transmission BTSABISPRIMA type of the P(Mandatory) BTS None SET BTSBWPARA(M GBFDandatory) Carrier Type 118601 Whether to configure the optical transmission mode for E1 port 1 of the BTS3600C. If the optical transmission mode is configured, the BSC can connect to SET the BTS BTSDOMUBP(O through GBFDptional) optical fibers. 111202 Whether to configure the optical transmission mode for E1 port 2 of the BTS3600C. If the optical transmission mode is configured, the BSC can connect to SET the BTS BTSDOMUBP(O through GBFDptional) optical fibers. 111202 Whether to configure the optical transmission mode for E1 port 3 of the BTS3600C. If the optical transmission mode is configured, the BSC can connect to SET the BTS BTSDOMUBP(O through GBFDptional) optical fibers. 111202
None
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
Abis over IP
HDLC, IP
HDLC IP
None None
None
BTS
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None
Transpor t
BSC6900 V900R011
Radio
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
O&M of BTS
Enumeration Type
NO(NO), YES(YES) ENABLE(Enable Trace Range Limit), DISABLE(Disabl e Trace Range Limit)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
TRCRNGLM T
Trace Mode
BSC6900
O&M of BTS
Enumeration Type
ENABLE, DISABLE
None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
TRESEL
BSC6900
GBFD114101
GPRS
Enumeration Type
5sec(5sec), 10sec(10sec), 15sec(15sec), 20sec(20sec), 30sec(30sec), 60sec(60sec), 5sec, 10sec, 15sec, 120sec(120sec), 20sec, 30sec, 300sec(300sec), 60sec, 120sec, nouse(no use) 300sec, no use s
None
10sec
Cell
None
Not involved
Not involved
None
Radio
BSC6900
The load handover is triggered when the traffic load in a cell is greater than GBFDSET the value of 110601 GCELLHOAD(O this GBFDptional) parameter. 510501 Port number ADD of the ETHTRKLNK(Ma aggregation ndatory) member Slot number ADD of the ETHTRKLNK(Ma aggregation ndatory) member ADD ETHTRK(Mandat ory) ADD ETHTRKLNK(Ma ndatory) ADD aggregation ETHTRKIP(Man group datory) number Specified SET TRMMAP BTSABISPRIMA index of the P(Mandatory) user panel TRM load threshold index. The TRM load ADD threshold IPPATH(Optional must be ) configured. TRM load threshold index. The TRM load ADD threshold RSCGRP(Option must be al) configured.
None None
90 Cell
This parameter is valid only when "LOADHOEN" in "SET GCELLHOBASIC" is set Read & to YES. Write
Not involved
Not involved
None
Radio
TRKLNKPN
BSC6900
MRFD210103
Link aggregation
None None
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
TRKLNKSN
MRFD210103
Link aggregation
0~5, 8~27
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
TRKN
Trunk No.
BSC6900
MRFD210103
Link aggregation
None None
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
TRMI
BSC6900
None
None
0~163
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
TRMLOADT HINDEX
BSC6900
None
None
0~199
None
BSC69 2 00 None
Not involved
Not involved
The TRM load threshold must be configure The parameter modification d has no impact on the already. equipment. None The TRM load threshold must be configure The parameter modification d has no impact on the already. None The TRM equipment. load threshold must be configure The parameter modification d has no impact on the already. equipment. None The paramete r cannot be modified. Not involved
Transpor t
TRMLOADT HINDEX
BSC6900
None
None
0~199
None
BSC69 0 00 None
Not involved
Not involved
Transpor t
TRMLOADT HINDEX
BSC6900
TRM load threshold index. It is ADD the unique ID TRMLOADTH(M of the load andatory) threshold. None GBFD118611 GBFD118622 GBFD118611 GBFD118622
None Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1
10~199
None None
None
BSC69 00 None
Not involved
Not involved
Transpor t
TRMLOADT HINDEX
BSC6900
0~199
None
PPP 2 link
None
Not involved
Not involved
Not involved
None
Transpor t
TRMLOADT HINDEX
BSC6900
0~199
None
2 None
None
Not involved
Not involved
None
Transpor t
6/9/2013
Page290of316
150682621.xls.ms_office
Security Level:
TRMLOADT HINDEX
BSC6900
None
None
0~199
None
IP logical 2 port
None
Not involved
Not involved
Not involved
None
Transpor t
TRMLOADT HINDEX
BSC6900
None
None
0~199
None None
0 None
The TRM load threshold parameter must meet the following conditions: forward congestion recovery threshold < logical port bandwidth, backward congestion recovery threshold < Read & logical port bandwidth. Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
Transmission SET resources BTSABISPRIMA mapping P(Optional) switch None Trunk group ADD number of IPLOGICPORT( the logical Optional) port
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None None
None
BTS
None
Not involved
Not involved
None
Transpor t
TRUNKN
BSC6900
None
None
0~11
None None
None
IP logical port
None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved The paramete r cannot be modified. This paramete r specifies whether to enable the TRX aiding function. BCCH aiding: The main BCCH is aided to another normal TRX in this cell. BCCH aiding switchba ck: BCCH aiding switchba ck functions after the originally configure d BCCH TRX is recovere d.
None
Transpor t
TRUNKN
BSC6900
GBFD118609
0~11
None None
None
None
None
Not involved
Not involved
Not involved
None
Transpor t
TRUNKN
Trunk No.
BSC6900
TRXAIDSWI TCH
BSC6900
BSC6900
ADD TRUNK ETHMEP(Manda group tory) number Whether to enable the TRX aiding function. Four aiding modes are available. BCCH aiding: The main BCCH is aided to another normal TRX in this cell. BCCH aiding switchback: BCCH aiding switchback functions after the originally configured BCCH TRX is recovered. Baseband FH aiding: When the TRX involved in baseband FH in the cell is faulty or BCCH aiding SET is performed GCELLCCACCE in the cell, SS(Optional) baseband FH STR BTSTST(Mandat ory) Duration
GBFD118630
Ethernet OAM
0~11
None None
None
Not involved
Not involved
Not involved
Not involved
None
Transpor t
GBFD113801 GBFD111207
Enumeration Type
TRXAid_NotAllo w(TRX Aiding Not Allowed), AllowReForbid(Al lowed & Recover Forbidden), AllowReImmed(A llowed & Recover Immediately), AllowReCheckRe s(Allowed & Recover When Chk Res)
None None
AllowReCheckRes
Cell
None
Not involved
Not involved
5~10
None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio Equipme nt
BSC6900 V900R011
TRXID
TRX ID
BSC6900
SET GTRXCHANHOP (Optional) SET FHO(Mandatory) SET GTRXCHANHOP (Mandatory) SET GTRXHOP(Man datory) SET GTRXBASE(Ma ndatory) SET GTRXCHAN(Ma ndatory) SET GTRXFC(Manda tory) SET GTRXIUO(Mand atory) SET GTRXADMSTAT (Mandatory) SET GTRXCHANAD MSTAT(Mandato ry) ADD GTRX(Mandator y) ADD TRXBIND2PHYB RD(Mandatory) SET
0~63, 255
None None
None
Services will be disrupted if the handover fails after the parameter modification.
Cell
After this paramete r is modified, the services in the cell are handed over forcedly. The cell is reset (after ten seconds) after the handover succeeds . This protects the services from being The cell should be reset to interrupte validate the parameter d. modification.
None
Radio
TRXID
TRX ID
BSC6900
ADD BTSBINDLOCG RP(Mandatory) ADD GTRXBIND2HDL CPATH(Mandato ry) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional)
ID of the TRX. The TRX ID must be globally unique. The ID of TRX added in the main location group. The same TRX cannot be bound by the TRX boards in a same location group for multiple times.
MRFD210301
Configuration Management
0~3071
None None
None
TRX
None
Not involved
Not involved
Not involved
None
Radio
GBFD510104
Multi-site Cell
0~3071
None None
None
BTS
None
BTS
None
Equipme nt
TRXID
TRX Index
BSC6900
GBFD118601
TRXID1
No.1 TRX ID
BSC6900
Index of TRX GBFD1 113703 Index of TRX GBFD10 113703 Index of TRX GBFD11 113703 Index of TRX GBFD12 113703 Index of TRX GBFD13 113703 Index of TRX GBFD14 113703 Index of TRX GBFD15 113703 Index of TRX GBFD16 113703 Index of TRX GBFD17 113703 Index of TRX GBFD18 113703 Index of TRX GBFD19 113703 Index of TRX GBFD2 113703 Index of TRX GBFD20 113703 Index of TRX GBFD21 113703 Index of TRX GBFD22 113703 Index of TRX GBFD23 113703 Index of TRX GBFD24 113703 Index of TRX GBFD3 113703 Index of TRX GBFD4 113703 Index of TRX GBFD5 113703
TRXID10
No.10 TRX ID
BSC6900
TRXID11
No.11 TRX ID
BSC6900
TRXID12
No.12 TRX ID
BSC6900
TRXID13
No.13 TRX ID
BSC6900
TRXID14
No.14 TRX ID
BSC6900
TRXID15
No.15 TRX ID
BSC6900
TRXID16
No.16 TRX ID
BSC6900
TRXID17
No.17 TRX ID
BSC6900
TRXID18
No.18 TRX ID
BSC6900
TRXID19
No.19 TRX ID
BSC6900
TRXID2
No.2 TRX ID
BSC6900
TRXID20
No.20 TRX ID
BSC6900
TRXID21
No.21 TRX ID
BSC6900
TRXID22
No.22 TRX ID
BSC6900
TRXID23
No.23 TRX ID
BSC6900
TRXID24
No.24 TRX ID
BSC6900
TRXID3
No.3 TRX ID
BSC6900
TRXID4
No.4 TRX ID
BSC6900
TRXID5
No.5 TRX ID
BSC6900
Abis over IP Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping
0~3071
None None
None
BTS
None
Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write
BTS
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
0~3071
None None
None
Cell
None
Not involved
Not involved
The paramete r cannot The BTS should be reset to be validate the parameter modified. modification. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
None
Radio
6/9/2013
Page291of316
150682621.xls.ms_office
Security Level:
TRXID6
No.6 TRX ID
BSC6900
TRXID7
No.7 TRX ID
BSC6900
TRXID8
No.8 TRX ID
BSC6900
TRXID9
No.9 TRX ID
BSC6900
ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional)
Index of TRX GBFD6 113703 Index of TRX GBFD7 113703 Index of TRX GBFD8 113703 Index of TRX GBFD9 113703
Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping
0~3071
None None
None
Cell
None
Read & Write Read & Write Read & Write Read & Write
Not involved
Not involved
None
0~3071
None None
None
Cell
None
Not involved
Not involved
None
0~3071
None None
None
Cell
None
Not involved
Not involved
None
0~3071
None None
None
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
None
Radio
None
Radio
None
Radio
TRXIDLST
TRXID LST
BSC6900
SET GCELLHOPQUI CKSETUP(Optio nal) SET List of IDs of GCELLHOPANT carriers for QUICKSETUP(O frequency GBFDptional) hopping. 113701 List of TRX indexes. You can specify one TRX index (for example, 1) or more TRX indexes (for example, 0&1&2) in the GBFDsame BTS. 111207
String Type
None
1~120 characters
None None
None
BSC69 00 None
Cell
None
Radio
TRXIDLST
BSC6900
0~3071
None None
None
None
None
Not involved
Not involved
None After this paramete r is modified, the services in the cell are handed over forcedly. The cell is reset (after ten seconds) after the handover succeeds . This protects the services from being interrupte d.
BSC6900 V900R011
Equipme nt
TRXMAIO
Channel MAIO
BSC6900
Mobile allocation index offset SET (MAIO) of GTRXCHANHOP the channel in GBFD(Optional) the TRX 113701 ADD BTSBRDCAP(M andatory) ADD BTSRXUBRD(O ptional) Allowed number of carriers bound to a board.
0~63
None None
None
Cell
None
Radio
TrxNum
TRX Number
BSC6900
GBFD111202
O&M of BTS
0~8
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
TRXPN
BSC6900
Number of the channel ADD bound to the TRXBIND2PHYB TRX on the RD(Mandatory) TRX board
GBFD111202
O&M of BTS
0~7
None None
None
TRX
None
Not involved
Not involved
Not involved
None
Equipme nt
TRXPN
BSC6900
TRX board pass number in the sublocation group to which the TRX of the main location group is GBFDbound 510104 Whether the TRX priority is considered during channel GBFDassignment. 111005
Multi-site Cell
0~7
None None
None
TRX
None
Not involved
Not involved
Not involved
Not involved
Equipme nt
TRXPRIALL OW
BSC6900
Enumeration Type
NO(No), YES(Yes) TRX(TRX), TRU(TRU/DTRU) , QTRU(QTRU), DRRU(DRRU), DRFU(DRFU), MRRU(MRRU), MRFU(MRFU), GRFU(GRFU), GRRU(GRRU), BTS3900B(BTS3 900B), BTS3900E(BTS3 900E)
NO, YES
None None
YES
Cell
None
Not involved
Not involved
None
Radio
TRXTP
BSC6900
Type of the ADD TRX board TRXBIND2PHYB bound to the RD(Mandatory) TRX
GBFD111202
O&M of BTS
Enumeration Type
TRX, TRU, QTRU, DRRU, DRFU, MRRU, MRFU, GRFU, GRRU, BTS3900B, BTS3900E
None None
None
TRX
None
Not involved
Not involved
Not involved
TS
Time Slot
BSC6900
GBFD111801
8~255
None None
None
E1/T1 link
When the value of "OPMODE" of "BLK ATERE1T1" is BYCICVALUE, the value of TS needs to be set.
Not involved
Not involved
TS
Time Slot
BSC6900
It indicates the A interface timeslot No. The parameter BLK supports AE1T1(Mandator multiple y) values.
GBFD111803
TS
BSC6900
None
None
Interval Type 1~31 TS1(Time_slot_1 ), TS2(Time_slot_2 ), TS3(Time_slot_3 ), TS4(Time_slot_4 ), TS5(Time_slot_5 ), TS6(Time_slot_6 ), TS7(Time_slot_7 ), TS8(Time_slot_8 ), TS9(Time_slot_9 ), TS10(Time_slot_ 10), TS11(Time_slot_ 11), TS12(Time_slot_ 12), TS13(Time_slot_ 13), TS14(Time_slot_ 14), TS15(Time_slot_ 15), TS16(Time_slot_ 16), Enumeration TS17(Time_slot_ Type 17),
1~31, step:8
None None
None
E1/T1 link
When the value of "OPMODE" of "BLK AE1T1" is BYCICVALUE, the value of TS needs to be set.
Not involved
Not involved
The paramete r cannot be modified. 1. The block of Ater interface must be configure d. 2. If the BSC is configure d to the integrate d BMTC or A over IP is configure d, the configura tion does not support the operation . 3. If the block operation is applicabl e to only the ATERTS of the BM 1. The block of A interface must be configure d. 2. If the BSC is configure d to the integrate d BMTC or A over IP is configure d, the configura tion does not support the operation . 3. If the block operation is applicabl e to only the AE1T1 of the BM subrack.
Not involved
None
Equipme nt
Transpor t
Transpor t
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
Cell
None
Cell
Loopbac k test, which cause the service interrupti The parameter modification on on this has no impact on the link equipment. None
Transpor t
6/9/2013
Page292of316
150682621.xls.ms_office
Security Level:
TS
Bearing Timeslot
BSC6900
TS
Timeslot NO.
BSC6900
GBFD510002 GBFD111203
Gb Over FR
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
2~4294967294
None None
None
BC
None
Not involved
Not involved
None
O&M of BSC
1~31
None None
None
BTS
None
BTS
None
The parameter modification has no impact on the equipment. None The transport path should be re-established after the parameter modification. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt
Radio
TS16ENABL E
SET E1T1(Optional)
None
None
Enumeration Type
OFF(OFF), ON(ON) TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
OFF, ON
None None
None
E1/T1 port
None
Not involved
Not involved
This paramete r is valid only in the E1 mode of The parameter modification the has no impact on the AEUa. equipment. None
Transpor t
TSBITMAP
BSC6900
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
PPP link
None
Not involved
Not involved
Not involved
None
Transpor t
TSBITMAP
BSC6900
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
MP link None
Not involved
Not involved
None
Transpor t
TSBITMAP
BSC6900
TSC
TSC
BSC6900
Timeslot of the E1/T1 link carrying the PPP link. ADD The timeslot BTSPPPLNK(Ma of an E1 port ndatory) cannot be ADD used by BTSMPLNK(Man different PPP datory) links. The TSC is short for the Training Sequence Code. The TSC must be the same as the BCC. The delay equalization is performed by using the specified TSC when the MS or BTS receives the signal. The demodulation cannot be received because the delay equalization cannot be performed for the signals with same frequency ADD using GCELLMAGRP( different Optional) TSCs. This
GBFD118611
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
BTS
None
PPP link
The modificati on of the PPP link that is between the BTS and the BSC will affect the services. The modificati on of the PPP link that is between the BTS and the lowerlevel BTSs will lead to intermitte nt services carried by the lowerThe transport path should level be re-established after the BTSs. parameter modification.
None
BSC6900 V900R011
Transpor t
GBFD113701
0~7
None None
None
Cell
None
Cell
None
None
Radio
TSCOUNT
Idle Ts Count
BSC6900
Number of idle timeslots. You can configure up to 128 idle timeslots for the BTS at a time. A BTS can be configured with up to 512 idle GBFDtimeslots. 114101 Whether to allow TSC planning. If this parameter is set to No, the TSC values in all MA groups of the cell cannot be modified. In this case, the TSC values are automatically refreshed to the BCC values of the GBFDcell. 118201 Timeslot cross index Duration in timeslot mode
GPRS
0~512
None None
None
BTS
None
Not involved
Not involved
None
Radio
TSCPLANEN TSC Plan Enable Time slot cross index Duration * 10 minutes
BSC6900
TSCROSSX
BSC6900
TSDURAT
BSC6900
SoftSynchronized Network
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
None
Not involved
Not involved
None
None GBFD111207
0~65535
None None
None
None
Not involved
Not involved
None
min
None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
BSC6900 V900R011
TSIDX
Timeslot Index
BSC6900
Index of the monitoring timeslot. The ADD index is BTSMONITORT unique in a GBFDS(Optional) BTS. 114701 ADD SCHTSK(Mandat ory) SET SCHTSKSW(Opt ional) ADD SUBTSK(Option al) ADD SUBCMD(Option al) STR Name of the SCHTSK(Option scheduled al) task.
SemiPermanent Connection
0~127
None None
None
BTS
None
Not involved
Not involved
None
Radio
TSKN
Task Name
BSC6900
GBFD111203
O&M of BSC
String Type
None TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
1~50 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
TSMASK
Timeslot Mask
BSC6900
Time slots for Ater operation and maintenance. These time slots are provided by the ports connected to the Ater connection MRFDpath. 210301
Configuration Management
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
None
None
Not involved
Not involved
None
Equipme nt
TSMASK
TS Mask
BSC6900
The 64 kbit/s timeslots on the port are numbered MRFDfrom 1 to 31. 211501
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None None
None
BTS
None
BTS
None
None
Radio
6/9/2013
Page293of316
150682621.xls.ms_office
Security Level:
TSN
BSC6900
TSNO
Timeslot No.
BSC6900
Number of the slot where the tail board of the RXU ring is located. The slot No. is unique in the same BTS. Timeslot No. of Pb signaling link.
GBFD111202 GBFD111203
O&M of BTS
0~23
None None
None
BTS
None
Not involved
O&M of BSC
1~31
None None
None
PBSL
None
BSC6900
Not involved The services are interrupted until the PBSL is working normally.
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt Transpor t
TSPRIORIT Y
Timeslot Priority
BSC6900
Assignment priority level of the channel. If this parameter is less, the assignment priority level SET of the GTRXCHAN(Opt channel is ional) higher.
GBFD111005
0~7
None None
BSC6900
Maximum degree by which the output power of the multidensity TRX board can exceed the maximum SET output power GTRXDEV(Optio within a short GBFDnal) time 111005 Fast flux measurement duration. Normal flux measurement is performed after the fast flux measurement lasts over the period SET specified by BSCPSSOFTPA this GBFDRA(Optional) parameter. 119501 Whether to enable fast flux detection. When this parameter is set to Open, fast timeslot adjustment is SET possible after BSCPSSOFTPA the TBF is GBFDRA(Optional) set up. 119501
0~50
None
Physic al channe None l None If the board is configured with two to four TRXs, the recommended value of this parameter is 20. If the board is configured with five TRXs, the recommended value of this parameter is 50. If the board is configured with six TRXs, the recommended value TRX None
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Equipme nt
0~65535
ms
None
5000 BSC
The value of "Fast Flux Measurement Period" cannot be greater than that of "Fast Flux Measurement TBF Time".
Not involved
Not involved
If this paramete r is set to a great value, the PS DSP load will The parameter modification be has no impact on the heavy. equipment. None
BSC6900 V900R011
Radio
Enumeration Type
Close(Close), Open(Open)
Close, Open
None None
Open
BSC
None
Not involved
Not involved
None
When this parameter is enabled, the fast flux monitoing frequency is increased, and the channel allocation can be adjusted The parameter modification more quickly to adapt to the service type. has no impact on the Thus, the terminal throughput and BSC equipment. PS resource usage can be increased. BSC6900 V900R011
Radio
TSRATE
BSC6900
GBFD114701
SemiPermanent Connection
Enumeration Type
kbit/s None
None
BTS
If this parameter is set to "16K", "In-BSC Sub Timeslot No." and "OutBTS Sub Timeslot No." must be 0, 2, 4, or 6. If this parameter is set to "32K", "In-BSC Sub Timeslot No." and "OutBTS Sub Timeslot No." must be 0 or 4. If this parameter is set to "64K", "In-BSC Sub Timeslot No." and "OutBTS Sub Timeslot No." Read & must be 0. Write
Not involved
Not involved
None
Radio
TSRN
BSC6900
Number of the subrack where the tail board of the ADD RXU ring is BTSRXUCHAIN( located. The Mandatory) subrack No. CBN is unique in BTSRXUCHAIN( the same GBFDMandatory) BTS. 111202
O&M of BTS
0~254
None None
None
BTS
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
TSTMODE TSTTIMESL OT
Test Mode
BSC6900
Test Timeslot
BSC6900
STR BTSTST(Mandat ory) Test mode STR TRANSPERFTS T(Mandatory) Test timeslot STR BTSBATTTST(M Type of andatory) battery test Whether to allow the BTS to enable the timeslot shutdown PA function. If the BTS enables and supports this function, the BTS will periodically report the number of SET times for BSCDSTPA(Opti timeslot onal) shutdown. RXU topology type, that is, RXU ring topology or RXU chain topology. In the case of the ring topology, the optical ports of the head and tail boards must be specified. In the case of the chain topology, only the optical port ADD of the head BTSRXUCHAIN( board must Mandatory) be specified. STR Duration of CPUUSAGETST the CPU (Mandatory) usage test
GBFD111207 GBFD111202
Enumeration Type
TRXLOOPBACK (TRX Loopback Test), CHLLOOPBACK (Channel Loopback Test), TRXLOOPBACK, CHLCODEC(Spe CHLLOOPBACK, ech codec Test) CHLCODEC
None None
None
None
None
Not involved
Not involved
None
O&M of BTS
TSTTYPE
Test Type
BSC6900
GBFD111207
Interval Type 0~31 0~31 SIMPLETEST(Si mple Test), Enumeration MANUALTEST( SIMPLETEST, Type Manual Test) MANUALTEST
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Equipme nt
BSC6900 V900R011
Radio
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
GBFD111603
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
BSC69 00 None
Not involved
Not involved
None
Equipme nt
TT
Topo Type
BSC6900
GBFD111202 MRFD210301
Enumeration Type
CHAIN(Chain), RING(Ring)
CHAIN, RING
None None
None
BTS
None
Not involved
Not involved
Not involved
TTIME
Duration time
BSC6900
1~4294967295
ms
None
None
None
None
Not involved
Not involved
The paramete r cannot be modified. Not involved Not involved The parameter modification has no impact on the None equipment. None The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
TTL
Time to Live
BSC6900
TTL(Time to Live) of the PING packet None Indicates the live time of the packet for CFM link tracing detection None
None
1~255
None
64
Not involved
Not involved
Not involved
None
Transpor t
TTL
PKT TTL
BSC6900
None
1~128
64
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
Within the period when cell disabling is allowed, if the number of occupied channels, including the PDCH and TCH, in the cell to be disabled is below the threshold, the procedure for SET disabling the GCELLDYNTUR cell is GBFDNOFF(Optional) triggered. 111610 End time of dynmatically disabling cells, that is, after the time, cells SET are not GCELLDYNTUR allowed to be GBFDNOFF(Optional) disabled. 111610 Start time of dynmatically disabling cells, that is, from the time, cells SET are allowed GCELLDYNTUR to be NOFF(Optional) disabled. SET GCELLDYNTUR Whether the NOFF(Mandator cell can be y) disabled.
0~8
None None
6 Cell
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
Compound Type
HOUR, MINUTE
00:00~23:59
None None
None
Cell
This parameter is valid only when "TURNOFFENABLE" is set to ENABLE. The following condition must be met: "TURNOFFCELLSTPTIM E" >= "TURNOFFCELLSTRTIM Read & E". Write This parameter is valid only when "TURNOFFENABLE" is set to ENABLE. The following condition must be met: "TURNOFFCELLSTPTIM E" >= "TURNOFFCELLSTRTIM Read & E". Write
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
GBFD111610
Compound Type
HOUR, MINUTE
00:00~23:59
None None
None
Cell
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Equipme nt
GBFD111610
Enumeration Type
None None
None
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
6/9/2013
Page294of316
150682621.xls.ms_office
Security Level:
BSC6900
When the same coverage cell load of a cell that can be disabled always reaches the threshold, SET enable the GCELLDYNTUR cells that are GBFDNOFF(Optional) disabled. 111610 Temperature alarm upper threshold. If the temperature of the battery is higher than the value of this parameter, an alarm indicating the abnormal temperature is reported. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin g parameter in another GBFDmode. 111202
0~100
per cent
None
80 Cell
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
TUTHD
BSC6900
O&M of BTS
40~79
50 BTS
The value of this parameter must be smaller than "Temperature Alarm Lower Threshold".
Not involved
Not involved
None
Equipme nt
TUTHD
BSC6900
Temperature upper threshold of the cabinet. When the cabinet temperature is higher than this parameter, an alarm indicating the abnormal cabinet temperature is reported. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSDHEUBP(Op in another GBFDtional) mode. 111202 Value of the timer for reserving the channels in the observed GBFDcell. Value of the 118201 timer for reserving the TRXs in the observed GBFDcell. 118201 Value of the timer for reserving the TCHFs in the GBFDserving cell. 118201 Value of the timer for waiting for the response to information GBFDcollection. 118201 Value of the timer for searching for GBFDthe MS. 118201 Value of the timer for activating the reserved resources of GBFDthe BTS. Value of the 118201
O&M of BTS
-99~99
68 BTS
The value of this parameter must be at least two degrees greater than "Temperature Alarm Lower Threshold".
Not involved
Not involved
None
Equipme nt
TWFCMCHI DLE
TWF_CMCH_IDLE BSC6900
SoftSynchronized Network
1~60
seco nd
5 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
SoftSynchronized Network
1~60
seco nd
10 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
SoftSynchronized Network
1~60
seco nd
5 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
TWFRRMRS P TWF_RRM_RSP
BSC6900
1~60
min
10 None
BSC69 00 None
Not involved
Not involved
None.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
TWFSEEKM S TWF_SEEK_MS
BSC6900
1~60
min
5 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
TWFSYNCA CK
TWF_SYNC_ACK
BSC6900
SoftSynchronized Network
1~60
seco nd
5 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
TWFSYNCR PT TWF_SYNC_RPT
BSC6900
TX
TX-integer
BSC6900
TXBW
timer for waiting for the synchronizati on report from the Tx-integer (T for short). This parameter specifies the number of timeslots between two transmissions when an MS sends multiple consecutive channel requests. The access algorithm is defined in GSM Rec. 04.08 to reduce the collisions on the RACH and improve the efficiency of the RACH. The algorithm specifies three parameters: Tx-integer (T SET for short), GCELLIDLEBAS maximum IC(Optional) number of ADD Transmit IPPATH(Mandat bandwidth of ory) IP path ADD AISSCFG(Optio nal)
GBFD118201
SoftSynchronized Network
1~60
seco nd
5 None
BSC69 00 None
Not involved
Not involved
None.
BSC6900 V900R011
Radio
GBFD111003
TX_3(3), TX_4(4), TX_5(5), TX_6(6), TX_7(7), TX_8(8), TX_9(9), TX_10(10), TX_11(11), TX_12(12), TX_14(14), TX_16(16), TX_20(20), TX_25(25), TX_32(32), TX_50(50)
TX_3, TX_4, TX_5, TX_6, TX_7, TX_8, TX_9, TX_10, TX_11, TX_12, TX_14, TX_16, TX_20, TX_25, TX_32, TX_50
None None
None
Cell
None
Not involved
Not involved
None
None
None
1~3000000
kbit/s None
None
TxBw
Forward Bandwidth
BSC6900
Transmit bandwidth. The parameter is valid when the " transmission resource group type " is ATM or " transmission resource group type " is IP and the " bandwidth ADD mode " is RSCGRP(Manda FULL_DUPL tory) EX.
None
None
0~4000000
kbit/s None
None
Read & IP path None Write When "GRPT" in "ADD RSCGRP" is set to ATM or "BWMODE" is set to FULL_DUPLEX, this parameter is valid;The sum of "TxBw" and "RxBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "TxBw" and "AllBw" in "ADD RSCGRP"of lower class RSCGRP;The "TxBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "TxBw" in "ADD RSCGRP" of lower class RSCGRP, and the "RxBw" in "ADD Trans RSCGRP" of upper class mission RSCGRP can not less resour than the "RxBw" in "ADD ce RSCGRP" of lower class Read & group RSCGRP. Write
Not involved
Not involved
None
If the number of RACH conflicts in a cell is small, T should be set to a great value. If the number of RACH conflicts in a cell is large, T should be set to a small value. The increase in T and S prolongs the access time of an MS, thus affecting the access performance of the whole network. Therefore, appropriate values should be selected for T and S. When the network traffic is heavy, the success rate of immediate assignment is The parameter modification low if the sum of S and T is low. Thus, the has no impact on the value of T should be properly adjusted to Versions earlier than equipment. make the sum of S and T great. BSC6900 V900R011 The parameter modification has no impact on the Versions earlier than equipment. None BSC6900 V900R011
Radio Transpor t
Not involved
Not involved
None
Transpor t
TXINT
Interval of send[ms]
BSC6900
PING IP(Optional)
Indicates the interval between the two sent PING packets None Extension transmission timeslots of random access. This parameter determines the interval of sending another channel request after the MS fails to request a GBFDchannel. 119110 MRFD210301
None
200~10000
ms
500
Not involved
Not involved
Not involved
None
Transpor t
TXINT
TX_INT
BSC6900
TYPE
Subrack Type
BSC6900
T_2(2), T_3(3), T_4(4), T_5(5), T_6(6), T_7(7), T_8(8), T_9(9), T_10(10), T_12(12), T_14(14), T_16(16), T_20(20), T_25(25), T_32(32), T_50(50)
T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9, T_10, T_12, T_14, T_16, T_20, T_25, T_32, T_50 None None
T_20
Cell
None
Not involved
Not involved
None
EPS, TCS
EPS, TCS
None None
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
6/9/2013
Page295of316
150682621.xls.ms_office
Security Level:
TYPE
Finish Type
BSC6900
Explanation of the finish type of the batch commands 1. ANY_ERR_R ETURN: If there is a command whose execution fails, the execution of the batch commands is stopped and the execution of the file fails. 2. ALL_END_R ETURN: If all commands in the batch file are executed in one operation, the execution of the file succeeds no matter whether GBFDthere is 111203
O&M of BSC
Enumeration Type
ANY_ERR_RET URN(Stop at error), ANY_ERR_RETURN ALL_END_RETU , RN(Stop at end) ALL_END_RETURN None None START_TIME_L ONG, FA_PERIOD, FAULT_AUTO_R ESTORE, LOG_SWITCH, PIU_FAULT_RE STORE, PIU_RESTORE_ TIMES, FAULT_CELL_R ATE, FAULT_NODEB_ NUM
ANY_ERR_RETURN
RNC
None
Not involved
Not involved
None
Equipme nt
TYPE
Information Type
BSC6900
TYPE
Freq. Band
BSC6900
The SET information FACFG(Mandato type to be ry) set. This parameter specifies the frequency band of new cells. Each new cell can be allocated frequencies of only one frequency band. Once the frequency band is selected, it cannot be changed. GSM900: The cell supports GSM900 frequency band. DCS1800: The cell supports DCS1800 frequency band. GSM900_DC S1800: The ADD cell supports GCELL(Mandato GSM900 and ry) DCS1800
MRFD210304
Faulty Management
Enumeration Type
START_TIME_LON G/FA_PERIOD/FAU LT_AUTO_RESTOR E/LOG_SWITCH/PI U_FAULT_RESTOR E/PIU_RESTORE_T IMES/FAULT_CELL _RATE/FAULT_NOD EB_NUM None None
None
None
None
Not involved
Not involved
Not involved
None
Equipme nt
GBFD110101
Frequency Band
Enumeration Type
None
Cell
None
Not involved
Not involved
Not involved
The value of this paramete r cannot The cell should be activated be after the parameter changed. modification. None The modified paramete r takes effect after the The BSC should be reset to BSC is validate the parameter reset. modification. None
Radio
TYPE
PCU Type
BSC6900
GBFD114101
GPRS
Enumeration Type
OUTER, INNER
None None
None
BSC
None
BSC6900
Equipme nt
TYPE
Cell Type
BSC6900
TYPE
Freq. Band
BSC6900
Cell type. Currently, the fast BTS construction is available ADD for only GCELLQUICKS GSM900 and ETUP(Mandator DCS1800 GBFDy) cells. 113201 Frequency band to which the newly added cell belongs. Only one frequency band can be selected as the frequency band of each new cell and cannot be changed after the selection. To modify the frequency band of the new cell, you must delete ADD the cell and BTSAUTOPLAN( then add it GBFDMandatory) again. 510701
GSM900, DCS1800
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
Enumeration Type
TYPE
Cabinet Type
BSC6900
ADD BTSCABINET(O Type of a ptional) cabinet SET BTSANTFEEDE RCONNECT(Opt ional) SET BTSANTFEEDE RCONNECT(Opt ional) Power attenuation factor of uplink tributary 0
GBFD111202
O&M of BTS
Enumeration Type
GSM900, DCS1800, GSM850, PCS1900 BTS30(BTS30), BTS312(BTS312 ), BTS3001C(BTS3 001C), BTS3001CP(BT S3001CP), BTS3002C(BTS3 002C), BTS3012A(BTS3 012A), BTS3006A(BTS3 006A), BTS3012(BTS30 12), BTS3006C(BTS3 006C), BTS3002E(BTS3 002E), BTS3012AE(BTS 3012AE), BTS3012_II(BTS 3012 II), DBS3900_GSM( DBS3900 GSM), BTS3900_GSM( BTS3900 GSM), BTS3900A_GSM (BTS3900A GSM), DBS3036(DBS30 36), BTS3036(BTS30 36),
GSM900, DCS1800, GSM850, PCS1900 None None BTS30, BTS312, BTS3001C, BTS3001CP, BTS3002C, BTS3012A, BTS3006A, BTS3012, BTS3006C, BTS3002E, BTS3012AE, BTS3012_II, DBS3900_GSM, BTS3900_GSM, BTS3900A_GSM, DBS3036, BTS3036, BTS3036A, BTS3900B_GSM, BTS3900E_GSM, BTS3900_GSM_6R FC, BTS3900A_GSM_6 RFC, BTS3036_6RFC, BTS3036A_6RFC, APM30, TMC, BBC, APM100, APM200, PS4890, OMB, RFC6, BTS3900, BTS3900L, BTS3900AL, BTS3900AS, BTS3900B, BTS3900E, VIRTUAL None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
None
BTS
The value range of this parameter varies with BTS type. Different types of BTSs support different types of cabinets.
Not involved
Not involved
None
Equipme nt
U0GEN
BSC6900
GBFD111202
O&M of BTS
0~15
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
U0TOW
BSC6900
U0TRX
BSC6900
Whether there is a TMA on uplink GBFDtributary 0 111202 Index of uplink tributary 0. Each uplink tributary can be configured with a maximum of 12 TRXs. This parameter indicates the SET serial number BTSANTFEEDE of a TRX on RCONNECT(Opt the uplink GBFDional) tributary. 111202 TRX board SET pass number BTSANTFEEDE connected to RCONNECT(Opt uplink GBFDional) tributary 0 111202 Number of the slot where the TRX board SET that connects BTSANTFEEDE to uplink RCONNECT(Opt tributary 0 is GBFDional) located 111202 Number of the subrack where the TRX board SET that connects BTSANTFEEDE to uplink RCONNECT(Opt tributary 0 is GBFDional) located 111202 Power SET attenuation BTSANTFEEDE factor of RCONNECT(Opt uplink ional) tributary 1
O&M of BTS
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
O&M of BTS
Enumeration Type
1(1), 2(2), 3(3), 4(4), 5(5), 6(6), 7(7), 8(8), 9(9), 10(10), 11(11), 12(12)
None
BTS
None
Not involved
Not involved
None
Equipme nt
U0TRXBPN
BSC6900
O&M of BTS
0~1, 255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
U0TRXSN
BSC6900
O&M of BTS
0~23, 255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
U0TRXSRN
BSC6900
O&M of BTS
0~53, 255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
U1GEN
BSC6900
GBFD111202
O&M of BTS
0~15
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page296of316
150682621.xls.ms_office
Security Level:
U1TOW
BSC6900
U1TRX
BSC6900
Whether SET there is a BTSANTFEEDE TMA on RCONNECT(Opt uplink ional) tributary 1 None Index of uplink tributary 1. Each uplink tributary can connect to a maximum of 12 TRXs. This parameter indicates the SET serial number BTSANTFEEDE of a TRX on RCONNECT(Opt the uplink ional) tributary. None TRX board SET pass number BTSANTFEEDE connected to RCONNECT(Opt uplink GBFDional) tributary 1 111202 Number of the slot where the TRX board SET that connects BTSANTFEEDE to uplink RCONNECT(Opt tributary 1 is GBFDional) located 111202 Number of the subrack where the TRX board SET that connects BTSANTFEEDE to uplink RCONNECT(Opt tributary 1 is GBFDional) located 111202 Service priority of call reestablishm ent when CS services are preferred. This parameter is used for the flow control SET in the case of CSABISCONGC Abis over GBFDTRL(Optional) IP/HDLC. 118601 Service priority of the CS emergency call when CS services are preferred. This parameter is used for the flow control SET in the case of CSABISCONGC Abis over GBFDTRL(Optional) IP/HDLC. 118601 Service priority of the CS MSoriginated call when CS services are preferred. This parameter is used for the flow control SET in the case of CSABISCONGC Abis over GBFDTRL(Optional) IP/HDLC. 118601 Service priority of the CS MSterminated call when CS services are preferred. This parameter is used for the flow control SET in the case of CSABISCONGC Abis over GBFDTRL(Optional) IP/HDLC. 118601 Service priority of the incoming BSC handover when CS services are preferred. This parameter is used for the flow control SET in the case of CSABISCONGC Abis over GBFDTRL(Optional) IP/HDLC. 118601 Service priority of the intra-BSC handover when CS services are preferred. This parameter is used for the flow control SET in the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. Priority of other services when CS services are preferred. This parameter is used for the flow control SET in the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. PS service priority when CS services are preferred. This parameter is used for the flow control SET in the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. Priority of supplementar y services when CS services are preferred. This parameter is used for the flow control SET in the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. VBS service priority when CS services are preferred. This parameter is used for the flow control SET in the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. VGCS service priority when CS services are preferred. This parameter is used for the flow control SET in the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. In A over IP, if the parameter is set to ON, the circuit IE in the A interface extended signaling must be processed in the same way as that in A over nonIP. Otherwise, the A interface extended signaling SET cannot carry MSGSOFTPAR circuit-type A(Optional) IE.
None
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
None
Enumeration Type
1(1), 2(2), 3(3), 4(4), 5(5), 6(6), 7(7), 8(8), 9(9), 10(10), 11(11), 12(12)
None
BTS
None
Not involved
Not involved
None
Equipme nt
U1TRXBPN
BSC6900
O&M of BTS
0~1, 255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
U1TRXSN
BSC6900
O&M of BTS
0~23, 255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
U1TRXSRN
BSC6900
O&M of BTS
0~53, 255
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Abis over IP
0~15
None None
BSC69 6 00 None
Not involved
Not involved
None
Transpor t
BSC6900
Abis over IP
0~15
None None
BSC69 0 00 None
Not involved
Not involved
None
Transpor t
BSC6900
Abis over IP
0~15
None None
BSC69 1 00 None
Not involved
Not involved
None
Transpor t
BSC6900
Abis over IP
0~15
None None
BSC69 1 00 None
Not involved
Not involved
None
Transpor t
Abis over IP
0~15
None None
BSC69 10 00 None
Not involved
Not involved
None
Transpor t
GBFD118601
Abis over IP
0~15
None None
BSC69 3 00 None
Not involved
Not involved
None
Transpor t
BSC6900
GBFD118601
Abis over IP
0~15
None None
BSC69 15 00 None
Not involved
Not involved
None
Transpor t
ucCSPrefPS Prio
CS Preferred PS Priority
BSC6900
GBFD118601
Abis over IP
0~15
None None
BSC69 5 00 None
Not involved
Not involved
If this paramete r is set to 0, the emergen cy call The parameter modification may be has no impact on the affected. equipment. None
Transpor t
BSC6900
GBFD118601
Abis over IP
0~15
None None
BSC69 15 00 None
Not involved
Not involved
None
Transpor t
ucCSPrefVB SPrio
GBFD118601
Abis over IP
0~15
None None
BSC69 13 00 None
Not involved
Not involved
None
Transpor t
BSC6900
GBFD118601
Abis over IP
0~15
None None
BSC69 13 00 None
Not involved
Not involved
None
Transpor t
ucCtrlOfCicI E
BSC6900
GBFD118602
A over IP
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None OFF
OFF
MSC
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page297of316
150682621.xls.ms_office
Security Level:
BSC6900
Whether the BSC selects the TCHs on SET the link that OTHSOFTPARA reports an (Optional) RAI alarm.
GBFD111005
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
NO
BSC69 00 None
Not involved
Not involved
When RAI alarms occur on the E1 link, services cannot be assigned again by default. After the switch is enabled, services can be assigned, but singlepass may occur on the The parameter modification ongoing has no impact on the services. equipment. None
Equipme nt
BSC6900
Reestablish SET service PSPREFABISC priority of a ONGCTRL(Optio PS preferred GBFDnal) call. 118601 CS emergency SET call service PSPREFABISC priority of a ONGCTRL(Optio PS preferred GBFDnal) call. 118601 CS original SET call service PSPREFABISC priority of a ONGCTRL(Optio PS preferred GBFDnal) call. 118601 CS terminated SET call service PSPREFABISC priority of a ONGCTRL(Optio PS preferred GBFDnal) call. 118601 BSC handover SET service PSPREFABISC priority of a ONGCTRL(Optio PS preferred GBFDnal) call. 118601 BSC intra handover SET service PSPREFABISC priority of a ONGCTRL(Optio PS preferred GBFDnal) call. 118601 SET PSPREFABISC ONGCTRL(Optio nal) SET PSPREFABISC ONGCTRL(Optio nal) SET PSPREFABISC ONGCTRL(Optio nal) SET PSPREFABISC ONGCTRL(Optio nal) SET PSPREFABISC ONGCTRL(Optio nal) Other service priority of a PS preferred GBFDcall. 118601 PS service priority of a PS preferred GBFDcall. 118601 Supplement service priority of a PS preferred call. VBS service priority of a PS preferred call.
Abis over IP
0~15
None None
6 BSC
None
Not involved
Not involved
None
Transpor t
BSC6900
Abis over IP
0~15
None None
0 BSC
None
Not involved
Not involved
None
Transpor t
ucPSPrefCS OrgCallPrio
BSC6900
Abis over IP
0~15
None None
1 BSC
None
Not involved
Not involved
None
Transpor t
BSC6900
Abis over IP
0~15
None None
1 BSC
None
Not involved
Not involved
None
Transpor t
BSC6900
Abis over IP
0~15
None None
10 BSC
None
Not involved
Not involved
None
Transpor t
PS Preferred Intra ucPSPrefIntr Handover Service aBscHoPrio Priority BSC6900 PS Preferred ucPSPrefOth Other Service erPrio Priority
Abis over IP
0~15
None None
3 BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
BSC6900
Abis over IP
0~15
None None
15 BSC
None
Not involved
Not involved
None
Transpor t
ucPSPrefPS Prio
BSC6900
Abis over IP
0~15
None None
1 BSC
None
Not involved
Not involved
None
Transpor t
BSC6900
GBFD118601
Abis over IP
0~15
None None
15 BSC
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Transpor t
ucPSPrefVB SPrio
GBFD118601
Abis over IP
0~15
None None
13 BSC
None
Not involved
Not involved
None
Transpor t
BSC6900
Abis over IP
0~15
None None
13 BSC
None
Not involved
Not involved
None
Transpor t
BSC6900
BSC6900
In case of intra-BSC, if this parameter is set to ON, the same channel type and voice version as those of the SET original AITFOTHPARA( channel are Optional) selected. Indicates the UDP MUX mode of the receiving party. If the UDP MUX mode is not supported, it indicates the receiving party does not support the UDP MUX. The mode without supporting the function of compressing the RTP header indicates the receiving party supports the UDP MUX RTP header without supporting the function of compressing ADD the RTP IPMUX(Optional) header. The Indicates the UDP MUX mode of the receiving party. If the UDP MUX mode is not supported, it indicates the receiving party does not support the UDP MUX. The mode without supporting the function of compressing the RTP header indicates the receiving party supports the UDP MUX RTP header without supporting the function of compressing ADD the RTP IPMUX(Optional) header. The UDP port ADD number of NSVLLOCAL(Ma the local ndatory) NSVL. UDP port number of the remote NSVL.
GBFD118602
A over IP
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None ON
ON
MSC
None
Not involved
Not involved
None
Equipme nt
GBFD118604 GBFD118610
None MUXCLOSE
None
None
None
Not involved
Not involved
The adjacent node ID must be The parameter modification configure has no impact on the d. equipment. None
Transpor t
GBFD118604 GBFD118610
None MUXCLOSE
None
None
None
Not involved
Not involved
None
Transpor t
UDPPN
BSC6900
GBFD118603
Gb over IP
None None
None
NSE
None
Not involved
Not involved
Not involved
None
Transpor t
UDPPN
BSC6900
GBFD118603
Gb over IP
0~65535
None None
None
NSE
None
NSE
Services are interrupted unless the NSVL configuration is the same as the SGSN configuration at the BSC. None
Equipme nt
UG
Operator Level
BSC6900
ADD OP(Optional)
Group to which the operator belongs. This parameter is GBFDused to limit 111203 the right of MRFDthe operator. 210305
Enumeration Type
Administrators(A dministrators), Operators(Opera tors), Users(Users), Guests(Guests), Administrators, Customs(Custom Operators, Users, s) Guests, Customs
None Guests
Guests
RNC
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page298of316
150682621.xls.ms_office
Security Level:
UHUMTHD
BSC6900
Upper humidity threshold for the environment alarm box to report an alarm indicating that the ambient humidity is too high. If the ambient humidity of the BTS is higher than this threshold, the environment alarm box reports the alarm. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the SET correspondin BTSEXD(Option g parameter GBFDal) in another 111202 Used to identify the uplink access message GBFDSET from the MS. 510301 GCELLGSMR(O The value 64 GBFDptional) is invalid. 510302 Unit time for STR the error E1T1TST(Option code ratio al) test None SET Upper limit ALMPORT(Optio for triggering MRFDnal) an alarm 210304 Upper limit of the alarm. This SET parameter is BTSENVALMPO valid to the MRFDRT(Optional) analog port. 210304 Minimum interval between two consecutive uplink power control commands. Current call is an AMR full-rate call, and when the uplink receive quality is greater than the threshold, Huawei III power control is performed. Current call is an AMR full-rate call, and when the uplink receive quality is lower than the threshold, Huawei III power control is performed. Current call is an AMR half-rate call, and when the uplink receive quality is greater than the threshold, Huawei III power control is performed. Current call is an AMR half-rate call, and when the uplink receive quality is lower than the threshold, Huawei III power control is performed.
O&M of BTS Public Voice Group Call Service Public Voice Broadcast Service
0~99
None None
80 BTS
None
Not involved
Not involved
The setting of this paramete r must be greater than The parameter modification "LHUMT has no impact on the HD". equipment. None
Equipme nt
UIC
UIC
BSC6900
0~64
None None
64 Cell
None
Not involved
Not involved
None
Radio
UINTTIME
Unit time[ms]
BSC6900
300~1000
ms
1000
None
Not involved
Not involved
Not involved
UL
Upper Limit
BSC6900
String Type
None
0~9 Characters
None None
None
None
None
Not involved
Not involved
The paramete r cannot be modified. Not involved None The parameter modification has no impact on the None equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
UL
Upper Limit
BSC6900
Faulty Management
String Type
None
1~8 characters
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
ULADJPRD
PwrCtrlULAdjPerio d BSC6900
GBFD117601
ms
None
3 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULAFSREXQUALHIGHT HRED" >= "ULAFSREXQUALLOWT Read & HRED". Write This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULAFSREXQUALHIGHT HRED" >= "ULAFSREXQUALLOWT Read & HRED". Write This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULAHSREXQUALHIGH THRED" >= "ULAHSREXQUALLOWT Read & HRED". Write This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULAHSREXQUALHIGH THRED" >= "ULAHSREXQUALLOWT Read & HRED". Write
Not involved
Not involved
None
Radio
GBFD117601
1~30
dB
None
16 Cell
Not involved
Not involved
None
Radio
BSC6900
GBFD117601
1~30
dB
None
12 Cell
Not involved
Not involved
None
Radio
GBFD117601
1~30
dB
None
16 Cell
Not involved
Not involved
None
Radio
BSC6900
GBFD117601
1~30
dB
None
12 Cell
Not involved
Not involved
None
Radio
BSC6900
The P/N criterion must be met for triggering a UL BQ handover. That is, the UL BQ handover can be triggered only if P measurement reports among N measurement reports meet the triggering conditions. This parameter corresponds to P in the GBFDP/N criterion. 510501 The P/N criterion must be met for triggering a UL BQ handover. That is, the UL BQ handover can be triggered only if P measurement reports among N measurement reports meet the triggering conditions. This parameter corresponds to N in the GBFDP/N criterion. 510501
HUAWEI II Handover
1~8, step:0.5
None
1 Cell
This parameter is valid only when "BETTERCELLHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "ULBQSTATTIME" >= Read & "ULBQLASTTIME". Write
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. The parameter modification If this parameter is set to a smaller value, has no impact on the unnecessary handovers may be Versions earlier than equipment. performed. BSC6900 V900R011
Radio
BSC6900
HUAWEI II Handover
1~8, step:0.5
None
1 Cell
This parameter is valid only when "BETTERCELLHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "ULBQSTATTIME" >= Read & "ULBQLASTTIME". Write
Not involved
Not involved
If the ratio of uplink flow to downlink flow is greater than or equal to the value of this parameter during the fast flux measurement , the uplink SET services BSCPSSOFTPA takes GBFDRA(Optional) priority. 119501 Duration for uplink data transmission on the original channel if the TC resources are changed SET before and GCELLTMR(Opt after the GBFDional) handover 111203 Number of downlink GRPS TBF RLC blocks sent before an SET acknowledge BSCPSSOFTPA ment is RA(Optional) required. If the UL receive level remains lower than the "Edge HO UL RX_LEV Threshold" for a period, SET the edge GCELLHOBASI handover is C(Optional) triggered.
1~255
None None
5 BSC
None
Not involved
Not involved
None If this paramete r is set to a small value, the detection of service type is sensitive and may lead to pingpong switching between different
If this parameter is set to a greater value, unnecessary handovers may be performed. The parameter modification If this parameter is set to a smaller value, has no impact on the the handover cannot be performed in time Versions earlier than equipment. and call drops may occur. BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
ULDATAFW DTMR
BSC6900
O&M of BSC
0~240
ms
None
In Abis over TDM transmission, the recommended value is 180; in Abis over IP transmission, the recommended value is 200. Cell
None
Not involved
Not involved
None
Equipme nt
ulDlAckFreq
BSC6900
GBFD119105
RLC Mode
1~64
None None
15 BSC
None
Not involved
Not involved
None
Radio
GBFD110601 GBFD510501
0~63
dB
None
10 Cell
This parameter is valid when "FRINGEHOEN" is set to YES or "RXQCKFALLHOEN" is Read & set to YES. Write
Not involved
Not involved
None
If this parameter is set to a smaller value, call drops may occur due to delayed handover; if this parameter is set to a The parameter modification greater value, unnecessary handover may has no impact on the be performed, thus affecting the voice Versions earlier than equipment. quality. BSC6900 V900R011
Radio
BSC6900
Number of downlink EGPRS TBF RLC blocks SET before the BSCPSSOFTPA RRBP is set GBFDRA(Optional) to 1. 119105
RLC Mode
1~64
None None
20 BSC
None
Not involved
Not involved
None
Radio
6/9/2013
Page299of316
150682621.xls.ms_office
Security Level:
Period of acknowledgin g the EGPRS SET TBF RLC BSCPSSOFTPA uplink data GBFDRA(Optional) block. 119105 Filter adjustment factor for uplink power control. If this parameter is set to a large value, the filtered values become smooth, thus reducing the impact of poor measurement reports on the filtered values. If this parameter is set to a small value, the filter values are close to the actual ones and thus the power control speed is increased. Current call is a full-rate call, and when the uplink receive quality is greater than the threshold, Huawei III power control is performed. Current call is a full-rate call, and when the uplink receive quality is lower than the threshold, Huawei III power control is performed. Current call is a half-rate call, and when the uplink receive quality is greater than the threshold, Huawei III power control is performed. Current call is a half-rate call, and when the uplink receive quality is lower than the threshold, Huawei III power control is performed. Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple
RLC Mode
1~64
None None
32 BSC
None
Not involved
Not involved
None
Radio
BSC6900
GBFD117601
1~10
None None
3 Cell
Not involved
Not involved
None
Radio
GBFD117601
1~30
dB
None
22 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULFSREXQUALHIGHTH RED" >= "ULFSREXQUALLOWTH Read & RED". Write This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULFSREXQUALHIGHTH RED" >= "ULFSREXQUALLOWTH Read & RED". Write This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULHSREXQUALHIGHT HRED" >= "ULHSREXQUALLOWTH Read & RED". Write This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULHSREXQUALHIGHT HRED" >= "ULHSREXQUALLOWTH Read & RED". Write
Not involved
Not involved
None
Radio
BSC6900
GBFD117601
1~30
dB
None
16 Cell
Not involved
Not involved
None
Radio
GBFD117601
1~30
dB
None
18 Cell
Not involved
Not involved
None
Radio
GBFD117601
1~30
dB
None
18 Cell
Not involved
Not involved
None
Radio
ULHYSTF1
BSC6900
GBFD115501
AMR FR
0~15
None None
2 Cell
The setting of this parameter must meet the following condition: "ULTHF1" + "ULHYSTF1" < "ULTHF2" + Read & "ULHYSTF2". Write
Not involved
Not involved
None
Radio
ULHYSTF2
BSC6900
GBFD115501
AMR FR
0~15
None None
3 Cell
The setting of this parameter must meet the following condition: "ULTHF2" + "ULHYSTF2" < "ULTHF3" + Read & "ULHYSTF3". Write
Not involved
Not involved
None
Radio
ULHYSTF3
BSC6900
GBFD115501
AMR FR
0~15
None None
3 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page300of316
150682621.xls.ms_office
Security Level:
ULHYSTH1
BSC6900
ULHYSTH2
BSC6900
ULHYSTH3
BSC6900
BSC6900
BSC6900
Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple
GBFD115502
AMR HR
0~15
None None
3 Cell
The setting of this parameter must meet the following condition: "ULTHH1" + "ULHYSTH1" < "ULTHH2" + Read & "ULHYSTH2". Write
Not involved
Not involved
None
Radio
GBFD115502
AMR HR
0~15
None None
4 Cell
The setting of this parameter must meet the following condition: "ULTHH2" + "ULHYSTH2" < "ULTHH3" + Read & "ULHYSTH3". Write
Not involved
Not involved
None
Radio
GBFD115502
AMR HR
0~15
None None
15 Cell
None
Not involved
Not involved
None
Radio
GBFD115507
WB AMR
0~15
None None
2 Cell
The setting of this parameter must meet the following condition: "ULTHWB1" + "ULHYSTWB1" < "ULTHWB2" + Read & "ULHYSTWB2". Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
GBFD115507
WB AMR
0~15
None None
2 Cell
The setting of this parameter must meet the following condition: "ULTHWB1" + "ULHYSTWB1" < "ULTHWB2" + Read & "ULHYSTWB2". Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
{1~100}
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
When the network receives measurement reports, in consideration of the accuracy of a single measurement report, the measurement values in certain measurement reports are filtered to represent the radio operating environment. This parameter specifies the number of measurement reports sampled for SET filtering the GCELLPWR2(O uplink signal GBFDptional) strength. 110703 Maximum permissible adjustment step when the BSC decreases SET the uplink GCELLPWR3(O transmit ptional) power.
ms
None
5 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2 and "UPPCEN" in "SET GCELLBASICPARA" is Read & set to YES. Write
Not involved
Not involved
None
Radio
BSC6900
GBFD117601
1~30
dB
None
8 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
6/9/2013
Page301of316
150682621.xls.ms_office
Security Level:
ULMAXUPST EP ULMAXUpStep
BSC6900
Maximum permissible adjustment step when the BSC increases the SET uplink GCELLPWR3(O transmit GBFDptional) power. 117601 Threshold of uplink SET overload GCELLHOINTE congestion RRATLDB(Optio state in a 2G MRFDnal) Cell 211402 After the BSC delivers the power control command, it should wait for a certain period before affirm the effect of the power control. Therefore, the MR that power control decision is based on cannot accurately reflect the radio environment during the power adjustment, but misses the latest changes of the receive level and SET receive GCELLPWR2(O quality of the GBFDptional) MS. Thus, 110703 The MS transmit power is decreased only when the quality level of the MS transmit signal is smaller than the value of the parameter. If (the uplink receive level "MAX Up Adj. PC Value by Qual.]/PARA] ) is smaller than "UL RX_LEV Lower Threshold", the MS SET transmit GCELLPWRBAS power is not GBFDIC(Optional) adjusted. 110703 The MS transmit power is increased only when the quality level of the MS transmit signal is greater than the value of the parameter. If (the uplink receive level + "MAX Up Adj. PC Value by Qual.]/PARA] ) is greater than "UL RX_LEV Upper Threshold", the MS SET transmit GCELLPWRBAS power is not GBFDIC(Optional) adjusted. 110703 When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating environment for the sake of accuracy. This parameter specifies the number of measurement reports sampled for SET filtering the GCELLPWR2(O uplink signal GBFDptional) quality. 110703 In the case of power control, when the uplink receive quality is not smaller than "UL Qual. Bad Trig Threshold", the actual "UL RX_LEV Upper Threshold" is increased by SET "UL Qual. GCELLPWR2(O Bad GBFDptional) UpLEVDiff". 110703 In the case of power control, when the uplink receive quality is not smaller than "UL Qual. Bad Trig Threshold", the actual "UL RX_LEV Upper Threshold" is increased by SET "UL Qual. GCELLPWR2(O Bad GBFDptional) UpLEVDiff". 110703 An emergency handover due to bad quality is triggered when the uplink receive quality is not SET smaller than GCELLHOEMG( "UL Qual. Optional) Threshold".
1~30
dB
None
8 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
BSC6900
{1~100}
None None
None
BSC
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
0~3
None None
0 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2 and "UPPCEN" in "SET GCELLBASICPARA" is Read & set to YES. Write
Not involved
Not involved
None
Radio
BSC6900
0~7
None None
0 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "ULQLOWTHRED" >= Read & "ULQHIGHTHRED". Write
Not involved
Not involved
None
If this parameter is set to a smaller value, downward power control is not performed when the signal quality is good, thus causing power waste and increasing the interference. If this parameter is set to a The parameter modification greater value, downward power control is has no impact on the performed even though the signal quality Versions earlier than equipment. is bad, thus affecting the speech quality. BSC6900 V900R011
Radio
BSC6900
0~7
None None
3 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "ULQLOWTHRED" >= Read & "ULQHIGHTHRED". Write
Not involved
Not involved
None
If this parameter is set to a greater value, upward power control may not be performed when the voice quality is bad, thus affecting the voice quality. If this parameter is set to a smaller value, upward power control may be performed The parameter modification when the voice quality is good, thus has no impact on the causing the power waste and increasing Versions earlier than equipment. the interference. BSC6900 V900R011
Radio
ms
None
5 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2 and "UPPCEN" in "SET GCELLBASICPARA" is Read & set to YES. Write
Not involved
Not involved
None
Radio
BSC6900
0~7
None None
3 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
BSC6900
0~63
dB
None
5 Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Not involved
Not involved
None
Radio
GBFD110601 GBFD510501
0~70
None None
55 Cell
This parameter is valid only when "BQHOEN" in "SET GCELLHOBASIC" is set to YES and "NODLMRHOEN" in "SET GCELLHOEMG" is Read & set to YES. Write
Not involved
Not involved
BSC6900
The value of this parameter corresponds to multiplying quality level 0 to 7 by 10. An emergency handover can be triggered only when the uplink receive quality of the MS is greater than SET the value of GCELLAMRQUL this GBFD(Optional) parameter. 115501
AMR FR
0~70
None None
60 Cell
None
Not involved
Not involved
None The setting of this paramete r affects the triggering of BQ(Bad Quality) handover of AMR FR calls. If it is set to a smaller value, the uplink BQ handover is easily The parameter modification triggered has no impact on the . equipment.
If this parameter is set to a greater value, handover may not be performed when the uplink voice quality is bad, thus leading to call drops. If this parameter is set to a The parameter modification smaller value, unnecessary handovers has no impact on the may be performed, thus affecting the Versions earlier than equipment. voice quality. BSC6900 V900R011
Radio
If this parameter is set to a smaller value, the handovers due to bad uplink quality may increase, thus decreasing the handover success rate. If this parameter is set to a greater value, handovers due to bad uplink quality are less possible to Versions earlier than occur, thus increasing the call drop rate. BSC6900 V900R011
Radio
6/9/2013
Page302of316
150682621.xls.ms_office
Security Level:
BSC6900
The value of this parameter corresponds to multiplying quality level 0 to 7 by 10. An emergency handover can be triggered only when the uplink receive quality of the MS is greater than SET the value of GCELLAMRQUL this GBFD(Optional) parameter. 115502 Step adjustment ratio of the receive level SET in the uplink GCELLPWR3(O power ptional) control
AMR HR
0~70
None None
55 Cell
None
Not involved
Not involved
The setting of this paramete r affects the triggering of BQ handover of AMR HR calls. If it is set to a smaller value, the uplink BQ handover is easily The parameter modification triggered has no impact on the . equipment.
If this parameter is set to a smaller value, the handovers due to bad uplink quality may increase, thus decreasing the handover success rate. If this parameter is set to a greater value, handovers due to bad uplink quality are less possible to Versions earlier than occur, thus increasing the call drop rate. BSC6900 V900R011
Radio
GBFD117601
0~10
None None
3 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating environment for the sake of accuracy. This parameter specifies the number of measurement reports sampled for exponent SET filtering of the GCELLPWR3(O uplink signal GBFDptional) strength. 117601
ms
None
3 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULREXLEVHIGHTHRED " >= "ULREXLEVLOWTHRED Read & ". Write This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULREXLEVHIGHTHRED " >= "ULREXLEVLOWTHRED Read & ". Write
Not involved
Not involved
None
Radio
When the uplink receive level reaches the threshold, Huawei III SET power GCELLPWR3(O control is GBFDptional) performed. 117601
0~63
dB
None
30 Cell
Not involved
Not involved
None
If this parameter is set to a greater value, downward power control may not be performed when the voice quality is good, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, The parameter modification downward power control may be has no impact on the performed when the voice quality is bad, Versions earlier than equipment. thus affecting the voice quality. BSC6900 V900R011
Radio
When the uplink receive level is lower than the threshold, Huawei III SET power GCELLPWR3(O control is GBFDptional) performed. 117601 When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating environment for the sake of accuracy. This parameter specifies the number of measurement reports sampled for slide-window SET filtering of the GCELLPWR3(O uplink signal GBFDptional) strength. 117601 Step adjustment ratio of the receive SET quality in the GCELLPWR3(O uplink power ptional) control.
0~63
dB
None
20 Cell
Not involved
Not involved
None
If this parameter is set to a greater value, upward power control may be performed when the voice quality is good, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, upward power control The parameter modification may not be performed when the voice has no impact on the quality is bad, thus affecting the voice Versions earlier than equipment. quality. BSC6900 V900R011
Radio
ms
None
1 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
GBFD117601
0~10
None None
6 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating environment for the sake of accuracy. This parameter specifies the number of measurement reports sampled for exponent SET filtering of the GCELLPWR3(O uplink signal GBFDptional) quality. 117601 When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating environment for the sake of accuracy. This parameter specifies the number of measurement reports sampled for slide-window SET filtering of the GCELLPWR3(O uplink signal ptional) quality. Signal strength factor for the protective limitation on calculating the uplink power control adjustment step. The calculated step value cannot exceed the step value that is obtained on the basis of the signal strength protection factor and the signal SET quality GCELLPWR3(O protection ptional) factor.
ms
None
3 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
GBFD117601
ms
None
1 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Not involved
Not involved
None
Radio
BSC6900
GBFD117601
0~100
None None
6 Cell
Not involved
Not involved
None
Radio
6/9/2013
Page303of316
150682621.xls.ms_office
Security Level:
BSC6900
Signal strength factor for the protective limitation on calculating the uplink power control adjustment step. The calculated step value cannot exceed the step value that is obtained on the basis of the signal strength protection factor and the signal SET quality GCELLPWR3(O protection GBFDptional) factor. 117601 When the uplink receive level reaches the threshold, Huawei II SET power GCELLPWRBAS control is GBFDIC(Optional) performed. 110703 When the uplink receive level is below the threshold, Huawei II power control is performed. Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple
0~100
None None
75 Cell
Not involved
Not involved
None
Radio
ULSSHIGHT HRED
0~63
dB
None
30 Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "ULSSHIGHTHRED" >= Read & "ULSSLOWTHRED". Write This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "ULSSHIGHTHRED" >= Read & "ULSSLOWTHRED". Write
Not involved
Not involved
None
If this parameter is set to a greater value, downward power control may not be performed when the voice quality is good, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, The parameter modification downward power control may be has no impact on the performed when the voice quality is bad, Versions earlier than equipment. thus affecting the voice quality. BSC6900 V900R011 If this parameter is set to a greater value, upward power control may be performed when the voice quality is good, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, upward power control The parameter modification may not be performed when the voice has no impact on the quality is bad, thus affecting the voice Versions earlier than equipment. quality. BSC6900 V900R011
Radio
ULSSLOWT HRED
GBFD110703
0~63
dB
None
18 Cell
Not involved
Not involved
None
Radio
ULTHF1
BSC6900
GBFD115501
AMR FR
0~63
dB
None
15 Cell
The setting of this parameter must meet the following conditions: "ULTHF1" < "ULTHF2"; "ULTHF1" + "ULHYSTF1" < "ULTHF2" + Read & "ULHYSTF2". Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The coding rate and MOS are affected.
Radio
ULTHF2
BSC6900
GBFD115501
AMR FR
0~63
dB
None
19 Cell
The setting of this parameter must meet the following conditions: "ULTHF2" < "ULTHF3"; "ULTHF2" + "ULHYSTF2" < "ULTHF3" + Read & "ULHYSTF3". Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The coding rate and MOS are affected.
Radio
ULTHF3
BSC6900
GBFD115501
AMR FR
0~63
dB
None
28 Cell
The setting of this parameter must meet the following conditions: "ULTHF2" < "ULTHF3"; "ULTHF2" + "ULHYSTF2" < "ULTHF3" + Read & "ULHYSTF3". Write
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The coding rate and MOS are affected.
Radio
ULTHH1
BSC6900
GBFD115502
AMR HR
0~63
dB
None
23 Cell
The setting of this parameter must meet the following conditions: "ULTHH1" < "ULTHH2"; "ULTHH1" + "ULHYSTH1" < "ULTHH2" + Read & "ULHYSTH2". Write
Not involved
Not involved
None
Radio
ULTHH2
BSC6900
GBFD115502
AMR HR
0~63
dB
None
31 Cell
The setting of this parameter must meet the following conditions: "ULTHH2" < "ULTHH3"; "ULTHH2" + "ULHYSTH2" < "ULTHH3" + Read & "ULHYSTH3". Write
Not involved
Not involved
None
Radio
6/9/2013
Page304of316
150682621.xls.ms_office
Security Level:
ULTHH3
BSC6900
ULTHWB1
BSC6900
ULTHWB2
BSC6900
Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so SET forth. Since GCELLCCAMR( there are Optional) multiple Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so SET forth. Since GCELLCCAMR( there are Optional) multiple Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-tointerference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so SET forth. Since GCELLCCAMR( there are Optional) multiple
GBFD115502
AMR HR
0~63
dB
None
63 Cell
The setting of this parameter must meet the following conditions: "ULTHH2" < "ULTHH3"; "ULTHH2" + "ULHYSTH2" < "ULTHH3" + Read & "ULHYSTH3". Write
Not involved
Not involved
None
Radio
GBFD115507
WB AMR
0~63
dB
None
21 Cell
The setting of this parameter must meet the following conditions: "ULTHWB1" < "ULTHWB2"; "ULTHWB1" + "ULHYSTWB1" < "ULTHWB2" + Read & "ULHYSTWB2". Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
GBFD115507
WB AMR
0~63
dB
None
25 Cell
The setting of this parameter must meet the following conditions: "ULTHWB1" < "ULTHWB2"; "ULTHWB1" + "ULHYSTWB1" < "ULTHWB2" + Read & "ULHYSTWB2". Write This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
BSC6900 V900R011
Radio
ULTOOLHO ALLOW
UL to OL HO Allowed
BSC6900
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
Not involved
Not involved
None
Radio
ulUlAckFreq
BSC6900
Number of uplink GRPS TBF RLC blocks sent before an SET acknowledge BSCPSSOFTPA ment is GBFDRA(Optional) required. 119105 Whether the crosstalk optimization function over the Um interface is allowed. If this parameter is set to YES when call drops occur on the Um interface, this function can avoid crosstalk due to very early assignment of the channel that is not released. If this parameter is set to YES and the ongoing service is speech service, the SET BSC also GCELLSOFT(O sends the GBFDptional) Channel 111203 Timer of penalty on a neighboring cell when a handover fails due to SET faults of air GCELLHOFITPE interface N(Optional) connection.
RLC Mode
1~64
None None
32 BSC
None
Not involved
Not involved
None
Radio
O&M of BSC
Enumeration Type
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None
Equipme nt
BSC6900
GBFD110601 GBFD510501
0~255
None
10 Cell
None
Not involved
Not involved
None
If this parameter is set to a greater value, call drops may occur due to no suitable neighboring cell for handover. If this The parameter modification parameter is set to a smaller value, has no impact on the handover success rate may be Versions earlier than equipment. decreased. BSC6900 V900R011
Radio
UmVer
Um Interface Tag
BSC6900
Phase tag for GSM protocols SET that the Um BSCBASIC(Opti interface MRFDonal) supports 210301 Whether to support the balanced mode or the unbalanced mode retry times
Configuration Management
Enumeration Type
GSM_PHASE_1, GSM_PHASE_2, GSM_PHASE_1, GSM_PHASE_2 GSM_PHASE_2, GSM_PHAS Plus GSM_PHASE_2Plus None E_2
GSM_PHASE_2
Generally, the value of this parameter is equal BSC69 to "A Interface Tag" and 00 "Abis Interface Tag".
Not involved
Not involved
None
Radio
UNBA
Support Balance
BSC6900
SET E1T1(Optional)
None
None
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
E1/T1 port
None
Not involved
Not involved
Not involved
None
Transpor t
UNBLOCKR ETRY
Unblock Retry
BSC6900
after the peer response timer expires during NSVC GBFDunblocking. 510002
Gb Over FR
1~6
None None
3 BSC
None
Not involved
Not involved
None
Equipme nt
Abnormally alarm triggering threshold when the ANT_A tributary antenna current is too light. When the actual current is lower than the configured value, the ALD Current Abnormally Alarm is triggered with the correspondin SET g alarm BTSRXUBP(Opti tributary No. MRFDonal) of 1. 210304
Faulty Management
10~3500
mA
40
40 BTS
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page305of316
150682621.xls.ms_office
Security Level:
Abnormally alarm triggering threshold when the ANT_B tributary antenna current is too light. When the actual current is lower than the configured value, the ALD Current Abnormally Alarm is triggered with the correspondin SET g alarm BTSRXUBP(Opti tributary No. MRFDonal) of 1. 210304 Abnormally alarm triggering threshold when the RET tributary antenna current is too light. When the actual current is lower than the configured value, the ALD Current Abnormally Alarm is triggered with the correspondin SET g alarm BTSRXUBP(Opti tributary No. MRFDonal) of 1. 210304 Abnormally alarm clearance triggering threshold when the ANT_A tributary antenna current is too light. When the actual current is higher than the configured value, the ALD Current Abnormally Alarm disappears with the correspondin SET g alarm BTSRXUBP(Opti tributary No. MRFDonal) of 1. 210304 Abnormally alarm clearance triggering threshold when the ANT_B tributary antenna current is too light. When the actual current is higher than the configured value, the ALD Current Abnormally Alarm disappears with the correspondin SET g alarm BTSRXUBP(Opti tributary No. MRFDonal) of 1. 210304 Abnormally alarm clearance triggering threshold when the RET tributary antenna current is too light. When the actual current is higher than the configured value, the ALD Current Abnormally Alarm disappears with the correspondin SET g alarm BTSRXUBP(Opti tributary No. MRFDonal) of 1. 210304 Index of upper-level ADD BTS BTSAUTOPLAN( connected to GBFDMandatory) the BTS 111202
Faulty Management
10~3500
mA
40
40 BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Faulty Management
10~3500
mA
40
40 BTS
None
Not involved
Not involved
None
Equipme nt
UnderCurClr ThdA
Faulty Management
10~3500
mA
60
60 BTS
None
Not involved
Not involved
None
Equipme nt
UnderCurClr ThdB
Faulty Management
10~3500
mA
60
60 BTS
None
Not involved
Not involved
None
Equipme nt
UnderCurClr ThdRET
BSC6900
Faulty Management
10~3500
mA
60
60 BTS
None
Not involved
Not involved
None
Equipme nt
UPBTSID
Up BTS Index
BSC6900
O&M of BTS
0~2047
None None
None
BTS
None
BTS
None
Equipme nt
UPBTSID
BSC6900
O&M of BTS
0~2047
None None
None
BTS
None
BTS
This paramete r can be modified only when the BTS is The transport path should deactivat be re-established after the ed. parameter modification.
None
Radio
UPBTSIDTY PE
Index type of upper-level ADD BTS BTSAUTOPLAN( connected to GBFDMandatory) the BTS 111202
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
UPBTSIDTY PE
BSC6900
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
Not involved
Not involved
Radio
UPBTSNAM E
Up BTS Name
BSC6900
Name of the upper-level BTS connected to the BTS. The ADD BTS name is BTSAUTOPLAN( unique within GBFDMandatory) a same BSC. 111202 Name of the upper-level BTS. The name is unique in a BSC. The invalid characters (\, /, :, *, ?, ", <, >, |, and #) cannot appear in the GBFDname. 111202 Update code for a simple cell broadcast message. This parameter together with "Code" uniquely identifies a cell broadcast GBFDmessage. 113602
O&M of BTS
String Type
None
1~64 characters
None None
None
BTS
None
BTS
None
Equipme nt
UPBTSNAM E
BSC6900
O&M of BTS
String Type
None
1~64 characters
None None
None
BTS
None
BTS
This paramete r can be modified only when the BTS is The transport path should deactivat be re-established after the ed. parameter modification.
None
Radio
UPDATE
Update
BSC6900
0~15
None None
None
Cell
None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page306of316
150682621.xls.ms_office
Security Level:
BSC6900
Default coding scheme of the uplink GPRS link. If the uplink adopts the dynamic adjustment coding scheme, this parameter can be used to set the coding scheme for transmission during initial access. If the uplink uses the fixed coding scheme, the TBF uses the fixed coding GBFDscheme. 119106
None None
CS1
Cell
None
Not involved
Not involved
None
Radio
BSC6900
BSC6900
Default coding scheme of the uplink EDGE link. If the uplink adopts the dynamic adjustment coding scheme, this parameter can be used to set the coding scheme for transmission during initial access. If the uplink uses the fixed coding scheme, the SET TBF uses the GCELLEGPRSP fixed coding GBFDARA(Optional) scheme. 114201 Uplink multiplex threshold of dynamic channel conversion. When the subscriber number on the channel reaches the value (threshold/10 ), the dynamic channel SET conversion GCELLPSCHM( application is GBFDOptional) triggered. 113101 Default coding scheme used on the uplink EGPRS2-A link. If the uplink uses the dynamic coding scheme, this parameter specifies the coding scheme that is used for the transmission in initial access. If the uplink uses the fixed coding scheme, the SET TBF uses the GCELLEGPRSP fixed coding GBFDARA(Optional) scheme. 510803 Fixed coding scheme that is used on the uplink EGPRS2-A link. If the uplink uses the fixed coding scheme, this parameter can be set to any one in MCS1-6 and UAS7-11. If the uplink uses the dynamic coding scheme, this SET parameter GCELLEGPRSP can be set to ARA(Optional) UNFIXED. Inactive period of extended uplink TBF. After the network side receives the last uplink RLC data block (CountValue= 0) of the MS supporting the extended uplink TBF, the uplink TBF is released immediately. Instead, the uplink TBF is set to the inactive state. In the inactive period, if the MS needs to transmit the uplink RLC data block, SET the MS can GCELLPRIVATE use the OPTPARA(Optio inactive nal) uplink TBF
EGPRS
Enumeration Type
Not involved
Not involved
None
Radio
10~70
None None
20 Cell
None
Not involved
Not involved
None
Radio
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS5(MCS5), MCS6(MCS6), UAS7(UAS7), UAS8(UAS8), UAS9(UAS9), UAS10(UAS10), UAS11(UAS11)
MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, UAS7, UAS8, UAS9, UAS10, UAS11 None None
MCS6
Cell
This parameter is valid only when "EGPRS2A" is Read & set to YES. Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
UPE2AFIXM CS
BSC6900
GBFD510803
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS5(MCS5), MCS6(MCS6), UAS7(UAS7), UAS8(UAS8), UAS9(UAS9), UAS10(UAS10), UAS11(UAS11), UNFIXED(UNFIX ED)
MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, UAS7, UAS8, UAS9, UAS10, UAS11, UNFIXED None None
UNFIXED
Cell
This parameter is valid only when "EGPRS2A" is Read & set to YES. Write
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
GBFD119203
0~5000
ms
None
2000 Cell
None
Not involved
Not involved
None
Radio
UPFIXCS
BSC6900
Adjustment mode of the uplink GPRS link coding scheme. If the fixed coding scheme is used, this parameter is a value ranging from CS1 to CS4. If the dynamic coding scheme is used, this parameter is set to GBFDUNFIXED. 119106
CS1(CS1), CS2(CS2), CS3(CS3), CS4(CS4), UNFIXED(UNFIX CS1, CS2, CS3, ED) CS4, UNFIXED
None None
UNFIXED
Cell
None
Not involved
Not involved
None
Radio
UPFIXMCS
BSC6900
Coding scheme of the uplink EDGE link. If the uplink uses the fixed coding scheme, this parameter is set to a value ranging from MCS1 to MCS9. If the uplink uses the dynamic adjustment coding scheme, this SET parameter is GCELLEGPRSP set to GBFDARA(Optional) UNFIXED. 114201
EGPRS
Enumeration Type
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS5(MCS5), MCS6(MCS6), MCS7(MCS7), MCS8(MCS8), MCS9(MCS9), UNFIXED(UNFIX ED)
None None
UNFIXED
Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page307of316
150682621.xls.ms_office
Security Level:
BSC6900
One of the thresholds to determine whether the uplink interference exists. If the uplink level is not smaller than "Interf.of UL Level Threshold" and the uplink quality of the channel is not less than "Interf.of UL Qual. Threshold", the uplink interference exists. One of the thresholds to determine whether the uplink interference exists. If the uplink level is not smaller than "Interf.of UL Level Threshold" and the uplink quality of the channel is not less than "Interf.of UL Qual. Threshold", the uplink interference exists.
GBFD110601 GBFD510501
0~70
None None
40 Cell
None
Not involved
Not involved
None
Radio
UPINTERLE VLIMIT
BSC6900
GBFD110601 GBFD510501
0~63
dB
None
30 Cell
None
Not involved
Not involved
Maximum time in which a user uses the uplink of its VGCS call continuously when the SET BTS works in BTSFALLBACK( fallback GBFDOptional) mode 510309
10~255
None
30 BTS
Not involved
Not involved
UPPCEN
UL PC Allowed
BSC6900
Whether to GBFDSET allow power 110703 GCELLBASICPA control on the GBFDRA(Optional) MS 117601 Whether to indicate it is the upper level adjacent node when ADD "Is Root ADJNODE(Mand Node" is set atory) to No. None Upper class transport resource group No. It is valid only when " Is First Class Transport ADD Resource RSCGRP(Manda Group " is tory) set to NO. Upper ADD number of IPLOGICPORT( the logical Optional) port If the difference between uplink receive levels of calls within the same timeslot is greater than "Offset of the difference between uplink received levels" for P seconds among N seconds, the call with weak uplink receive level within the timeslot will be handed over to another timeslot. This parameter corresponds to P in the P/N criterion. After the existing uplink receive level, uplink receive level after the previous optimization, and the value of this parameter are weightaveraged, the uplink receive level after the optimization at this time is obtained and used for determing the difference between the uplink receive levels.
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
Cell
None
Not involved
Not involved
None This paramete r is supporte d only by the following types of BTSs: BTS3012 , BTS3006 C, BTS3012 AE, BTS3012 II, and BTS3002 E. In a GSM900 cell, the power control level of the MS ranges from 0 to 19. Generally , the maximum transmit power supporte d by an MS is level 5 (mapping to 33 dBm). The minimum transmit power supporte d by an MS is level 19 (mapping to 5 dBm). Other
Radio
Radio
Radio
UPPERANI
Upper Ani
BSC6900
None
0~4599
None None
None
When the value of "IsROOTNODE" in "ADD Adjace ADJNODE" is set to NO, Read & nt node this parameter is valid. Write
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
None
None
0~2047
None None
None
When "ISFIRSTCLASSE" in "ADD RSCGRP" is set to NO, this parameter is Read & valid. Write
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. Not involved
None
Transpor t
UPPERLP
BSC6900
None
None
512~1535
None None
None
None
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
GBFD110601 GBFD510501
1~16
None
4 Cell
The following condition must be met: "UPRXLEVSTATICTIME" >= Read & "UPRXLEVLASTTIME". Write
Not involved
Not involved
None
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. If this parameter is set to a smaller value, The parameter modification unnecessary handovers may be has no impact on the performed, thus affecting the voice Versions earlier than equipment. quality. BSC6900 V900R011
Radio
BSC6900
GBFD110601 GBFD510501
1~10, step:0.1
None None
6 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page308of316
150682621.xls.ms_office
Security Level:
BSC6900
If the difference between uplink receive levels of calls within the same timeslot is greater than "Offset of the difference between uplink received levels" for P seconds among N seconds, the call with weak uplink receive level within the timeslot will be handed over to another timeslot. This parameter GBFDcorresponds 110601 to N in the GBFDP/N criterion. 510501
1~16
None
5 Cell
The following condition must be met: "UPRXLEVSTATICTIME" >= Read & "UPRXLEVLASTTIME". Write
Not involved
Not involved
UPSENDSM DIS
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
This parameter specifies whether the transmission of point-topoint short messages is disabled. If necessary, the transmission of the uplink short messages in a specific cell can be disabled so that sufficient radio SET channels can GCELLCCAD(O be seized by ptional) normal calls. Delay of releasing the non-extended uplink TBF. After receiving the last uplink RLC data block (CountValue= 0), the network side sends the message Packet Uplink Ack/Nack with FAI=1 to notify the MS of releasing the uplink TBF. After this parameter is set, the network side notifies the MS of releasing this TBF after specified SET delay. In this GCELLPRIVATE way, the OPTPARA(Optio downlink TBF nal) can be Retransmissi on threshold when the coding mode of the uplink TBF is changed from CS2 to CS1. When the retransmissio n rate of the uplink TBF is greater than or equal to this threshold, the coding mode of the uplink SET TBF is GCELLPSCS(O changed ptional) from CS2 to Retransmissi on threshold when the coding mode of the uplink TBF is changed from CS3 to CS2. When the retransmissio n rate of the uplink TBF is greater than or equal to this threshold, the coding mode of the uplink SET TBF is GCELLPSCS(O changed ptional) from CS3 to Retransmissi on threshold when the coding mode of the uplink TBF is changed from CS4 to CS3. When the retransmissio n rate of the uplink TBF is greater than or equal to this threshold, the coding mode of the uplink SET TBF is GCELLPSCS(O changed ptional) from CS4 to Retransmissi on threshold when the coding mode of the uplink TBF is changed from CS1 to CS2. When the retransmissio n rate of the uplink TBF is less than or equal to this threshold, the coding mode of the uplink SET TBF is GCELLPSCS(O changed ptional) from CS1 to Retransmissi on threshold when the coding mode of the uplink TBF is changed from CS2 to CS3. When the retransmissio n rate of the uplink TBF is less than or equal to this threshold, the coding mode of the uplink SET TBF is GCELLPSCS(O changed ptional) from CS2 to
GBFD110203
NO(No), YES(Yes)
NO, YES
None None
NO
Cell
None
Not involved
Not involved
None Pay special attention to the setting of this paramete r during an upgrade. If sending short message s is allowed, this paramete r must be set to No. If this paramete r is set to Yes, radio channels cannot be used to send short message The parameter modification s has no impact on the regardles equipment. None
If this parameter is set to a greater value, unnecessary handovers may be performed, thus affecting the voice quality. The parameter modification If this parameter is set to a smaller value, has no impact on the the handover cannot be performed in time Versions earlier than equipment. and call drops may occur. BSC6900 V900R011
Radio
Radio
GBFD119203
0~300
ms
None
120 Cell
None
Not involved
Not involved
None
Radio
GBFD119106
0~64
per cent
None
10 Cell
None
Not involved
Not involved
None
Radio
GBFD118901
CS-3/CS-4
0~64
per cent
None
5 Cell
None
Not involved
Not involved
None
Radio
GBFD118901
CS-3/CS-4
0~64
per cent
None
5 Cell
None
Not involved
Not involved
None
Radio
GBFD118901
CS-3/CS-4
0~64
per cent
None
5 Cell
None
Not involved
Not involved
None
Radio
GBFD118901
CS-3/CS-4
0~64
per cent
None
2 Cell
None
Not involved
Not involved
None
Radio
6/9/2013
Page309of316
150682621.xls.ms_office
Security Level:
Uplink TBF UPTHDCSUP Threshold from GRADE3 CS3 to CS4 Cell Urgent Reselection Allowed
BSC6900
Retransmissi on threshold when the coding mode of the uplink TBF is changed from CS3 to CS4. When the retransmissio n rate of the uplink TBF is less than or equal to this threshold, the coding mode of the uplink TBF is changed GBFDfrom CS3 to 119106
0~64
per cent
None
2 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Radio
URGENTRE SELALLOW
BSC6900
Whether to SET allow the cell GCELLNC2PAR urgent GBFDA(Optional) reselection 116201 CHK INNSPCH(Mand atory) STR CALLRESLOP( Mandatory)
Enumeration Type
None None
PERMIT
Cell
None
Not involved
Not involved
None
Radio
BSC6900
GBFD111203
O&M of BSC
Enumeration Type
None
BSC69 00 None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
BSC6900
GBFD114101
GPRS
Enumeration Type
None None
SUPPORT
BSC
None
Not involved
Not involved
None
Radio
USR
DLD LICENSE(Manda tory) GBFDULD User name of 111203 LICENSE(Manda the FTP MRFDtory) server 210403 DLD BTSSW(Mandat ory) DLD RETANTCFG(M andatory) ULD BTSDEVFILE(M andatory) DLD BTSPATCH(Man datory) ULD Username of BTSLOG(Manda the FTP tory) server Start time when the TRX energy SET saving BTSDOMUBP(M function is andatory) enabled End time when the TRX energy SET saving BTSDOMUBP(M function is andatory) enabled Upper temperature threshold for the environment alarm box to report an alarm indicating that the ambient temperature is too high. If the ambient temperature of the BTS is higher than this threshold, the environment alarm box reports the alarm. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the SET correspondin BTSEXD(Option g parameter al) in another
String Type
None
1~32 characters
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
USR
FTPServer User
BSC6900
GBFD111202
O&M of BTS
String Type
None
1~32 characters
None None
None
None
None
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
BSC6900
GBFD111202
O&M of BTS
Compound Type
HOUR, MINUTE
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
GBFD111202
O&M of BTS
Compound Type
HOUR, MINUTE
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
UTEMTHD
BSC6900
GBFD111202
O&M of BTS
-99~99
50 BTS
None
Not involved
Not involved
The setting of this paramete r must be greater than The parameter modification "LTEMT has no impact on the HD". equipment. None
Equipme nt
BSC6900
When a UL subcell-OL subcel handover decision is performed to a call, the BSC determines whether the number of handover failures reaches the "MaxRetry Time after UtoO Fail". If the number reaches the threshold, the UL subcell to OL subcell handover is prohibited. Otherwise, the UL subcell to OL subcell handover is GBFDallowed. 113201 After an MS performs a OL subcell to UL subcell handover successfully, the MS cannot be handed over to the OL subcell again within the value of the GBFDparameter. 113201 One of the parameters that determine the coverage of the OL subcell and of the UL subcell. "UtoO HO Received Level Threshold", "OtoU HO Received Level Threshold", "ReceiveQual ThrshAMRFR ", "TA Threshold", and "TA Hysteresis" determine the coverage of the OL subcell and GBFDUL subcell. 113201 When this parameter is set to YES, the existing call is performed in the OL subcell, and "OL to UL HO Allowed" is set to YES, an OL subcell to UL subcell handover is triggered if the traffic volume in the UL subcell is smaller than "En Iuo Out Cell Low Load Thred". If the existing call is performed in the UL subcell, a UL subcell to OL subcell handover is triggered, and "UL to GBFDOL HO 113201
0~8
None None
3 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Not involved
Not involved
None
Radio
BSC6900
0~255
None
10 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to ENIUO.
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the underlaid The parameter modification subcell. has no impact on the If this parameter is set to a smaller value, Versions earlier than equipment. ping-pong handovers may occur. BSC6900 V900R011
Radio
UTOORECT H
0~63
dB
None
35 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to ENIUO.
Not involved
Not involved
None
Radio
UTOOTRAF HOALLOW
BSC6900
NO(No), YES(Yes)
NO, YES
None None
YES
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to ENIUO.
Not involved
Not involved
None
Radio
6/9/2013
Page310of316
150682621.xls.ms_office
Security Level:
BSC6900
Hierarchical handover period of the load handover from the UL subcell to the OL subcell. If the channel seizure ratio of the UL subcell is greater than the UL subcell general overload threshold, all the calls in the cell send handover requests at the same time and the load on the BSC increases in a short time. Thus, congestion may occur in the target cell and call GBFDdrops may 113201 Hierarchical level step of the load handover from the UL subcell to the GBFDOL subcell. 113201
1~255
None
5 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to ENIUO.
Not involved
Not involved
None
If this parameter is set to a greater value, congestion in the underlaid subcell is difficult to be relieved; if this parameter is The parameter modification set to a smaller value, congestion may has no impact on the occur in the overlaid subcell in a short Versions earlier than equipment. time. BSC6900 V900R011
Radio
BSC6900
1~63
dB
None
5 Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to ENIUO.
Not involved
Not involved
None
If this parameter is set to a greater value, congestion may occur in the overlaid The parameter modification subcell in a short time; if this parameter is has no impact on the set to a smaller value, congestion in the Versions earlier than equipment. underlaid subcell is difficult to be relieved. BSC6900 V900R011
Radio
BSC6900
BSC6900
Whether the 3G cell uses frequency division reuse ADD or time GEXT3GCELL( division Optional) reuse. ADD Vendor code BTSRETANT(Ma of the RET ndatory) antenna
Enumeration Type
FDD(FDD), TDD(TDD)
FDD, TDD
None None
None
Cell
None
Not involved
Not involved
None
O&M of BTS
String Type
None
2 characters
None None
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
BSC6900
VIPCELL
VIP Cell
BSC6900
This parameter specifies the usage threshold of the CPU for VIP user calls that can be admitted. When the usage of a CPU is greater than this threshold, the new service requests from VIP users are transferred to another CPU for processing. When the usage of all CPUs is greater than this threshold, all new service requests are GBFDrejected. 111705 GBFD111705
50~95
per cent
None
BSC69 95 00 None
Not involved
Not involved
None
NO, YES
None NO
NO
Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
BSC6900
This parameter specifies the eMLPP priority value correspondin g to the VIP call. When the eMLPP(Enha nced MultiLevel Precedence and Preemption service) priority value of a user is greater than or equal to the value of this parameter, the user is a GBFDVIP user. 111705
Enumeration Type
NONE(None), LEVEL4(User Level 4), LEVEL3(User Level 3), LEVEL2(User Level 2), LEVEL1(User Level 1), LEVEL0(User Level 0), LEVELB(User Level B), LEVELA(User Level A)
None None
LEVEL0
None
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
BSC6900
VLANFlAG
VLANID Flag
BSC6900
This parameter specifies the usage threshold of the CPU for VIP user calls that are transferred from other CPUs. When the usage of a CPU is greater than this threshold, the VIP service requests transferred from other SET CPUs are BSCFCPARA(O directly GBFDptional) discarded. 111705 If the parameter is set to Disable, the added IP path is not configured with the VLAN ID. If the parameter is set to Enable, the added IP ADD path is IPPATH(Optional configured ) with the None
50~95
per cent
None
BSC69 90 00 None
Not involved
Not involved
None
BSC6900 V900R011
Radio
None
Enumeration Type
None DISABLE
DISABLE
IP path None
IP path
None
Transpor t
VLANFLAG
Vlan Flag
BSC6900
None
Enumeration Type
DISABLE, ENABLE
DISABLE, ENABLE
None None
None
BSC69 00 None
Not involved
Not involved
Not involved
The paramete r cannot be modified. Not involved The paramete r cannot be modified. The paramete r determin es whether the "VLANID" in the "ADD SCTPLN K" is functional . Incorrect setting of this paramete r can lead to access failure to the target IP address.
None
Transpor t
BSC6900
None
None
Enumeration Type
None DISABLE
DISABLE
BSC69 00 None
Not involved
Not involved
Not involved
Not involved
None
Transpor t
VLANFlAG2
BSC6900
None
Enumeration Type
None DISABLE
DISABLE
SCTP link
This parameter determines whether the parameter "VLANID" in Read & "ADD SCTPLNK" is valid. Write
SCTP link
The services are interrupted until the SCTP link is working normally.
Transpor t
VLANID
VLAN ID.
BSC6900
None
2~4094
None None
None
BSC69 00 None
BSC6900
If the mode is not set back, will interrupt service until it is set back.
Transpor t
VLANID
VLAN ID
BSC6900
GBFD118630
Ethernet OAM
2~4094
None None
None
VLANID
VLAN ID
BSC6900
GBFD118601
Abis over IP
2~4094
None None
None
Ethern et port None This parameter is valid only when "VLANSWITCH" is set to BTS YES.
Not involved
Not involved
Not involved
None
Transpor t
Not involved
Not involved
None
Transpor t
VLANID
VLAN ID
BSC6900
VLAN to which the maintenance association belongs in ADD the BTSETHMA(Man maintenance datory) domain.
GBFD118630 MRFD210301
2~4094
None None
None
Not involved
Not involved
Not involved
Not involved
Transpor t
6/9/2013
Page311of316
150682621.xls.ms_office
Security Level:
VLANID1
BSC6900
None
2~4094
None None
None
BSC69 00 None
BSC6900
If the mode is not set back, will interrupt service until it is set back.
VLANID2
BSC6900
None
2~4094
None None
None
BSC69 00 None
BSC6900
If the mode is not set back, will interrupt service until it is set back.
VLANPRI
VLAN Priority
BSC6900
VLAN priority None VLAN priority level of the service type. This parameter helps to determine the packet service priority level at the data link layer on the Ethernet. If this parameter is set to 0, the service type has the highest VLAN priority level. If this parameter is set to 7, the service type has the lowest VLAN priority level. VLAN switch for the service type
None
0~7
None None
None
BSC69 00 None
Not involved
Not involved
Incorrect setting of this paramete r can lead to access failure to the target IP address. Incorrect setting of this paramete r can lead to access failure to the target IP address. The existing networkin g can be affected when the relation between the VLAN and the DSCP are reset.
Transpor t
Transpor t
Transpor t
VLANPRI
VLAN Priority
BSC6900
BSC6900
GBFD118601 GBFD118601
Abis over IP
0~7
None None
None
BTS
This parameter is valid only when "VLANSWITCH" is set to Read & YES. Write Read & Write
Not involved
Not involved
None
Abis over IP
NO, YES
None None
None
BTS
None
Not involved
Not involved
VOICEDL
BSC6900
None
None
0~100
per cent
70
BSC69 70 00 None
Not involved
Not involved
VOICEPRIP ATH
AMR voice ADD service TRMMAP(Option bearer al) primary path None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
None None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF. When the interface type is Iu-CS, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR or IUCS, Read & 00 this parameter is valid. Write
Not involved
Not involved
BSC6900
None
None
Enumeration Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-CS, transmission type is ATM or IP, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set BSC69 to IUB or IUR, this Read & 00 parameter is valid. Write
Not involved
Not involved
VOICEUL
BSC6900
WCDMA ADD AMR voice TRMFACTOR(O service uplink ptional) factor None
None
Interval Type 0~100 FULL_RATE_VE R1, FULL_RATE_VE R2, FULL_RATE_VE R3, HALF_RATE_VE R1, HALF_RATE_VE R2, HALF_RATE_VE R3, FULL_RATE_VE R5 CLOSE(Close), OPEN(Open)
0~100
per cent
70
BSC69 70 00 None
Not involved
Not involved
None The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node configure d with the TRMMA P. After the successf ul modificati on, it is valid in the case of the new access of a subscribe r and the bandwidt h modificati on of an existing subscribe r. The modificati on of the paramete r affects the adjacent node that is configure d with the factor table. After the successf ul modificati on, the paramete r takes effect in the following two cases: 1. New access subscribe r. 2. Bandwidt h modificati on of the
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Transpor t
Transpor t
Transpor t
Transpor t
Transpor t
VOICEVER
BSC6900
Speech SET version GCELLCCACCE supported by MRFDSS(Optional) a cell 210301 ADD EMU(Optional) 24V voltage MRFDalarm switch 210304
None None
None
Cell
None
Not involved
Not involved
None
BSC6900
CLOSE, OPEN
None OPEN
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipme nt
6/9/2013
Page312of316
150682621.xls.ms_office
Security Level:
Upper Limit of VOL24_THD Alarm for 24V _HIGH Power Lower Limit of VOL24_THD Alarm for 24V _LOW Power Enable Alarm VOL48_MAS Reporting for 48V K Power Upper Limit of VOL48_THD Alarm for 48V _HIGH Power Lower Limit of VOL48_THD Alarm for 48V _LOW Power
BSC6900
ADD EMU(Optional)
Upper limit for triggering a 24 V voltage MRFDsensor limit alarm 210304 Lower for triggering a 24 V voltage MRFDsensor alarm 210304 48V voltage MRFDalarm switch 210304 Upper limit for triggering a 48V voltage MRFDsensorlimit alarm 210304 Upper for triggering a 48V voltage MRFDsensor alarm 210304 Whether to
Faulty Management
String Type
None
1~9 characters
28 None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
BSC6900
1~9 characters
20 None
None
None
Not involved
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
BSC6900
CLOSE, OPEN
None OPEN
None
None
None
Not involved
Not involved
None
BSC6900
ADD EMU(Optional)
Faulty Management
String Type
None
1~9 characters
57 None
None
None
Not involved
Not involved
None
Equipme nt
BSC6900
ADD EMU(Optional)
Faulty Management
String Type
None
1~9 characters
42 None
None
None
Not involved
Not involved
None
Equipme nt
BSC6900
enable the standing wave alarm SET parameters BTSDFCUBP(Op to be tional) configured
MRFD210304
Faulty Management
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
This parameter specifies a condition for generating a BTS alarm. This parameter together with "VSWR TRX error threshold" is used to detect whether the antenna system SET connected to GCELLOTHEXT( the TRX is GBFDOptional) faulty. 111202 SET BTSDFCUBP(Op tional) SET BTSDDPUBP(O ptional) Filtering times of serious standing wave alarms
O&M of BTS
0~12
None None
2 Cell
None
Not involved
Not involved
If this paramete r is set to a smaller value, the The parameter modification error is has no impact on the smaller. equipment. None
Equipme nt
BSC6900
MRFD210304
Faulty Management
1~30 14, 15, 16, 18, 20, 22, 24, 26, 28, 30, 33, 36, 88
None None
3 BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
Standing wave alarm threshold. When the VSWR is greater than the value of SET this BTSDFCUBP(Op parameter, tional) the TRX SET reports a BTSDDPUBP(O standing ptional) wave alarm. Serious standing wave alarm threshold. When the VSWR is greater than the value of this SET parameter, BTSDFCUBP(Op the TRX tional) reports a SET serious BTSDDPUBP(O standing ptional) wave alarm.
MRFD210304
Faulty Management
Enumeration Type
None None
20 BTS
This parameter must be at least 0.2 smaller than "Serious VSW Alarm TH".
Not involved
Not involved
None
Equipme nt
BSC6900
MRFD210304
Faulty Management
Enumeration Type
18, 20, 22, 24, 26, 28, 30, 32, 35, 38, 41, 45, 88
None None
30 BTS
This parameter must be at least 0.2 greater than "Standing Wave Radio Alarm Threshold".
Not involved
Not involved
None
Equipme nt
VSWRUNJU STTHRES
BSC6900
VVer
V-Version No.
BSC6900
This parameter specifies a condition for generating a BTS alarm. This parameter together with "VSWR TRX unadjusted threshold" are used to check whether the antenna system connecting to the TRX is faulty. If the value of this parameter is SET smaller, the GCELLOTHEXT( error is GBFDOptional) smaller. 111202 SET V-version BTSAUTODLDA number of CTINFO(Mandat the BTS GBFDory) software 111202 This timer is used to set the time of waiting for a ReleaseIndic ation message after a ChannelRele ase message is sent. If the SET timer expires, GCELLTMR(Opt the channel is GBFDional) deactivated. 111004 When the BSC sends a ChannelRele ase message and the current call uses the AMRFR encoding mode, the timer T3109 (AMRFR) is started. If the BSC receives the ReleaseIndic ation message before the T3109 (AMRFR) timer expires, the timer T3109 (AMRFR) is stopped. If the timer T3109 (AMRFR) expires, the SET BSC GCELLTMR(Opt deactivates GBFDional) the channel. 115501 When the BSC sends a ChannelRele ase message and the current call uses the AMRHR encoding mode, the timer T3109 (AMRHR) is started. If the BSC receives the ReleaseIndic ation message before the T3109 (AMRHR) timer expires, the timer T3109 (AMRHR) is stopped. If the timer T3109 (AMRHR) expires, the SET BSC GCELLTMR(Opt deactivates GBFDional) the channel. 115502
O&M of BTS
0~12
None None
2 Cell
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
O&M of BTS
0~999
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
BSC6900
4000~33000
ms
None
27000 Cell
None
Not involved
Not involved
None
The parameter modification If this parameter is set to a greater value, has no impact on the channel resources may be wasted, thus Versions earlier than equipment. causing congestion. BSC6900 V900R011
Radio
AMR FR
3000~34000
ms
None
34000 Cell
None
Not involved
Not involved
None
The parameter modification If this parameter is set to a greater value, has no impact on the channel resources may be wasted, thus Versions earlier than equipment. causing congestion. BSC6900 V900R011
Radio
AMR HR
3000~34000
ms
None
26000 Cell
None
Not involved
Not involved
None
The parameter modification If this parameter is set to a greater value, has no impact on the channel resources may be wasted, thus Versions earlier than equipment. causing congestion. BSC6900 V900R011
Radio
6/9/2013
Page313of316
150682621.xls.ms_office
Security Level:
The TCHs reserved for the emergency call are assigned to the user during the service assignment. If the TCHs are not assigned to the emergency call within a period, the TCHs are released SET from the GCELLTMR(Opt reservation ional) queue.
GBFD110202
1~30
None
15 Cell
None
Not involved
Not involved
If the timer is set to a greater value, the time of reserving channel resource s for an emergen cy call is long. In this case, the channel usage for ordinary calls is affected. If the timer is set to a smaller value, reserved channel resource s may not be assigned to an The parameter modification emergen has no impact on the cy call. In equipment. None
Radio
When the dynamic PDCH needs to use MAIO of the SDCCH, the SDCCH is not allowed to be assigned to new calls within the value of the parameter. After the timer expires, check whether the SDCCH is idle. If the SDCCH is idle, MAIO of the SDCCH is allowed to be preempted. If the channel is not idle, the MAIO is not allowed to be GBFDpreempted. 117002
0~60
None
4 Cell
None
Not involved
Not involved
None
Radio
WARMSET
Whether to start the heating equipment of the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSOUTPUT(Op in another GBFDtional) mode. 111202 ADD EMU(Optional) Water sensor MRFDalarm switch 210304
None None
None
BTS
None
Not involved
Not involved
None
BSC6900
CLOSE, OPEN
None OPEN
None
None
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipme nt Equipme nt
When the TFO establishmen t fails, the broadband SET AMR can be BSCBASIC(Opti switched to GBFDonal) the FAMR. 115507 Whether to limit the operation weekday of the operator. If the weekday needs to be limited, see the description of "Week".
WB AMR
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None None
OFF
Cell
None
Not involved
Not involved
None
BSC6900 V900R011
Radio
WEEK
Week Limit
BSC6900
ADD OP(Optional)
GBFD111203 MRFD210305
Enumeration Type
NOLIMIT, LIMIT
None NOLIMIT
No Limit
RNC
None
Not involved
Not involved
None
Equipme nt
WELONGI
WE Longitude
BSC6900
This parameter is used to select the location of a SET cell, east or GCELLLCS(Opti west onal) longitude.
GBFD115402
Enumeration Type
None None
East_Longitude
Cell
None
Not involved
Not involved
None
Equipme nt
WETSET
Humidification Equipment
BSC6900
Whether to start the humidification equipment of the BTS. In multi-mode scenario, the value of this parameter in this mode must be the same as the value of the correspondin SET g parameter BTSOUTPUT(Op in another GBFDtional) mode. 111202 This parameter is used to check the primary port. If it is set to YES, the system switches the primary port when detecting STR failure in the GBFDIPCHK(Optional) key test. 118609 Whether to start the dynamic adjustment of the LAPD window. If this parameter is set to ALLOW, the LAPD transmit and receive window is enlarged when the delay is increased, which improves the transmission efficiency of LAPD but consuming more buffer SET resources in OTHSOFTPARA the memory GBFD(Optional) of the LAPD. 118601
O&M of BTS
Enumeration Type
None None
None
BTS
None
Not involved
Not involved
None
Equipme nt
WHETHERA FFECTSWA P
Enumeration Type
NO(NO), YES(YES)
NO, YES
None None
None
None
None
Not involved
Not involved
Not involved
None
Transpor t
BSC6900
Abis over IP
Enumeration Type
DENY(Deny), ALLOW(Allow)
DENY, ALLOW
None None
None
BSC69 00 None
Not involved
Not involved
None
Transpor t
WK
Week
BSC6900
WKMODE
Work mode
BSC6900
You can select multiple weekdays. Work mode of the M3UA link set, including M3UA_ASP and M3UA_IPSP. For the description of the ASP and ADD IPSP, see M3LKS(Optional the ) RFC4666. ADD OP(Mandatory)
GBFD111203 MRFD210305
Enumeration Type
SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesda y), THU(Thursday), SUN, MON, TUE, FRI(Friday), WED, THU, FRI, SAT(Saturday) SAT
None None
None
RNC
None
Not involved
Not involved
None
Equipme nt
None
None
Enumeration Type
None M3UA_ASP
M3UA_ASP
BSC69 00 None
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page314of316
150682621.xls.ms_office
Security Level:
WLAETIME
BSC6900
WLAFLAG
BSC6900
Time when the BTS stops checking for a radio link alarm. If this time is up, the BTS stops checking for or reporting a radio link alarm until the next alarm SET detection GTRXRLALM(O start time is ptional) up. Whether to enable the BTS to report a major radio link alarm. If this parameter is set to YES, the BTS reports a major radio link alarm when a radio link warning is not cleared within "WLARP". If this parameter is set to NO, the BTS does not SET report any GTRXRLALM(O major radio ptional) link alarm. Period for clearing a radio link warning. If a radio link warning is cleared within this period, the BTS reports the recovery alarm for the warning. If a radio link warning is not cleared within this period, the BTS determines whether to report a major radio SET link alarm GTRXRLALM(O according to ptional) "WLAFLAG". Time when the BTS starts to check for a radio link alarm. If this time is up, the BTS starts to check for and SET report a GTRXRLALM(O radio link ptional) alarm.
GBFD111202
O&M of BTS
0~24
None
22 TRX
This parameter is valid only when "WLNKALMFLAG" is set Read & to YES. Write
Not involved
Not involved
None
Equipme nt
GBFD111202
O&M of BTS
Enumeration Type
NO(No), YES(Yes)
NO, YES
None None
None
TRX
This parameter is valid only when "WLNKALMFLAG" is set Read & to YES. Write
Not involved
Not involved
None
Equipme nt
WLARP
BSC6900
GBFD111202
O&M of BTS
1~255, step:5
min
None
None
TRX
This parameter is valid only when "WLNKALMFLAG" is set Read & to YES. Write
Not involved
Not involved
None
Equipme nt
WLASTIME
BSC6900
GBFD111202
O&M of BTS
0~24
None
8 TRX
This parameter is valid only when "WLNKALMFLAG" is set Read & to YES. Write
Not involved
Not involved
None
Equipme nt
WLNKALMF LAG
BSC6900
Whether to enable the BSC to deliver radio link alarm parameters to the BTS. If this parameter is set to YES, the BSC delivers the radio link alarm parameters to the BTS. If this parameter is set to NO, the BSC does not deliver the radio link SET alarm GTRXRLALM(M parameters GBFDandatory) to the BTS. 111202 flag of the work area to be formatted. None
O&M of BTS
Enumeration Type
BSC6900
FMT DATA(Optional)
None
Enumeration Type
NO, YES
None None
None
TRX
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
Active, Standby
None Active
Active
BSC69 00 None
Not involved
Not involved
Not involved
None
Equipme nt
WORKINGS TANDARD
Working Standard
BSC6900
SET Working BTSRXUBP(Opti mode of the onal) RXU board ADD SUBRACK(Mand Work mode atory) of subrack
GBFD111202
O&M of BTS
Enumeration Type
WORKMOD E
Work Mode
BSC6900
MRFD210301
Configuration Management
Enumeration Type
GSM_AND_UMT S(GSM AND UMTS), UMTS(UMTS), GSM_AND_UMTS, GSM(GSM) UMTS, GSM GO(GSM Only), UO(UMTS Only), GU(support GSM and UMTS) GO, UO, GU
None GSM
None
BTS
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Equipme nt
None None
None
None
None
Not involved
Not involved
Not involved
None
BSC6900 V900R011
Equipme nt
WORKMOD E
Work Mode
BSC6900
SET E1T1(Optional)
Working mode Bts port working mode.This parameter must be consistent with that of the peer. Optical interface type
None
None
Enumeration Type
None None
E1_UNBA
E1/T1 port
None
BSC6900
The conversio n from E1 to T1 or from T1 to E1 takes effect after the The parameter modification board is has no impact on the reset. equipment. None
Transpor t
WORKMOD E
Work Mode
BSC6900
ADD BTS(Optional) SET OPT(Optional) ADD ATERSL(Option al) ADD ATERCONSL(O ptional)
None
None
None E1
None
BTS
None
Not involved
Not involved
None
BSC6900
None
None
UNI, NNI
UNI, NNI
None None
None
Board
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transpor t Equipme nt
WS
Window Size
BSC6900
WTBS
BSC6900
Window size of the Ater signaling link. Time for which the BTS waits to swap the OML after the OML is interrupted. With this parameter, the BTS does not swap the OML when SET the OML is BTSOMLBACKU interrupted P(Optional) transiently.
GBFD111203
O&M of BSC
1~127
None None
ATER CONS 16 L
None
Not involved
Not involved
None
Transpor t
GBFD113728
OML Backup
30~300
None
90 BTS
Not involved
Not involved
None
Equipme nt
WTBS
BSC6900
Waiting time before establishing a link in the reverse direction after the SET transmission BTSRINGATTR( of a BTS is GBFDOptional) disrupted 117801
Ring Topology
60~300
None
None
BTS
This parameter must meet the following requirements: "FallBack Start Time" > "Ring I Wait Time Before Switch" + "Ring I Try Rotating Duration Time".
Not involved
Not involved
None
Radio
WTRT
WTR Time[Sec]
BSC6900
SET MSP(Optional)
Board Switchover
30~60000
None
Not involved
Not involved
Not involved
None
Transpor t
6/9/2013
Page315of316
150682621.xls.ms_office
Security Level:
ZONET
TimeZone
BSC6900
SET TZ(Optional)
Time zone
MRFD210301
Configuration Management
Enumeration Type
GMT-1200(GMT12:00), GMT1100(GMT11:00), GMT1000(GMT10:00), GMT0930(GMT09:30), GMT0900(GMT09:00), GMT0800(GMT08:00), GMT0700(GMT07:00), GMT0600(GMT06:00), GMT0500(GMT05:00), GMT0430(GMT04:30), GMT0400(GMT04:00), GMT0330(GMT03:30), GMT0300(GMT03:00), GMT0200(GMT02:00), GMT0100(GMT01:00), GMT(GMT), GMT+0100(GMT +01:00), GMT+0200(GMT
GMT-1200(GMT12:00), GMT1100(GMT-11:00), GMT-1000(GMT10:00), GMT0930(GMT-09:30), GMT-0900(GMT09:00), GMT0800(GMT-08:00), GMT-0700(GMT07:00), GMT0600(GMT-06:00), GMT-0500(GMT05:00), GMT0430(GMT-04:30), GMT-0400(GMT04:00), GMT0330(GMT-03:30), GMT-0300(GMT03:00), GMT0200(GMT-02:00), GMT-0100(GMT01:00), GMT(GMT), GMT+0100(GMT+0 1:00), GMT+0200(GMT+0 2:00), GMT+0300(GMT+0 3:00), GMT+0330(GMT+0 3:30), GMT+0400(GMT+0 4:00), GMT+0430(GMT+0 None None
None
BSC69 00 None
Not involved
Not involved
None
Equipme nt
6/9/2013
Page316of316