Beruflich Dokumente
Kultur Dokumente
This data sheet provides information on subminiature size, axial lead mounted rectifiers for generalpurpose lowpower applications.
Features
http://onsemi.com
Shipped in Plastic Bags, 1000 per bag Available Tape and Reeled, 5000 per reel, by adding a RL suffix to
the part number Available in FanFold Packaging, 3000 per box, by adding a FF suffix to the part number PbFree Packages are Available
Mechanical Characteristics
Case: Epoxy, Molded Weight: 0.4 gram (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Lead and Mounting Surface Temperature for Soldering Purposes:
260C Max. for 10 Seconds, 1/16 in. from case Polarity: Cathode Indicated by Polarity Band Leads are Readily Solderable
MARKING DIAGRAM
A 1N400x YYWWG G A = Assembly Location 1N400x = Device Number x = 1, 2, 3, 4, 5, 6 or 7 YY = Year WW = Work Week G = PbFree Package (Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information on page 5 of this data sheet.
*For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
60 35
120 70
240 140
720 420
1000 560
1200 700
V V A
IFSM TJ Tstg
A C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Indicates JEDEC Registered Data
THERMAL CHARACTERISTICS
Rating Maximum Thermal Resistance, JunctiontoAmbient Symbol RqJA Max Note 1 Unit C/W
ELECTRICAL CHARACTERISTICS
Rating Maximum Instantaneous Forward Voltage Drop, (iF = 1.0 Amp, TJ = 25C) Maximum FullCycle Average Forward Voltage Drop, (IO = 1.0 Amp, TL = 75C, 1 inch leads) Maximum Reverse Current (rated DC voltage) (TJ = 25C) (TJ = 100C) Maximum FullCycle Average Reverse Current, (IO = 1.0 Amp, TL = 75C, 1 inch leads) Indicates JEDEC Registered Data Symbol vF VF(AV) IR Typ 0.93 0.05 1.0 Max 1.1 0.8 10 50 30 Unit V V mA
IR(AV)
mA
http://onsemi.com
2
TC = 150C TC = 100C
TC = 100C
0.1 0.5
1.2
1.0E09 0
10
20
40
60
80
100
http://onsemi.com
3
Data shown for thermal resistance, junctiontoambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured.
TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA 3 Lead Length, L 1/8 1/4 1/2 52 65 72 67 80 87 50 Units C/W C/W C/W
MOUNTING METHOD 1
L L
MOUNTING METHOD 2
L L
http://onsemi.com
4
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently PbFree.
http://onsemi.com
5
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently PbFree.
http://onsemi.com
6
B
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO41 OUTLINE SHALL APPLY 4. POLARITY DENOTED BY CATHODE BAND. 5. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION.
K F
A
POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES)
F K
DIM A B D F K
INCHES MIN MAX 0.161 0.205 0.079 0.106 0.028 0.034 0.050 1.000
MILLIMETERS MIN MAX 4.10 5.20 2.00 2.70 0.71 0.86 1.27 25.40
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLCs product/patent coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com
7
1N4001/D