Beruflich Dokumente
Kultur Dokumente
1N4001 - 1N4007
Features
Low forward voltage drop. High surge current capability.
DO-41
COLOR BAND DENOTES CATHODE
Parameter
Average Rectified Current .375 " lead length @ TA = 75C Non-repetitive Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Ambient Storage Temperature Range Operating Junction Temperature
Value
1.0 30 2.5 20 50 -55 to +175 -55 to +150
Units
A A W mW/C C/W C C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Electrical Characteristics
Symbol
VRRM VRMS VR IRM
Parameter
Peak Repetitive Reverse Voltage Maximum RMS Voltage DC Reverse Voltage (Rated VR) Maximum Instantaneous Reverse Current @ rated VR TA = 25C TA = 100C Maximum Instantaneous Forward Voltage @ 1.0 A Maximum Full Load Reverse Current, Full Cycle TA = 75C Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz 50 35 50 100 70 100
Device
4001 4002 4003 400
200 140 200 400 280 400 5.0 500 1.1 30 15
Units
400
600 420 600
4006 4007
800 560 800 1000 700 1000 V V V A A V A pF
VFM Irr C
1N4001-1N4007, Rev. A1
1N4001-1N4007
Typical Characteristics
Forward Current Derating Curve
1.6 FORWARD CURRENT (A) 1.4
Forward Characteristics
20 10 FORWARD CURRENT (A) 4 2 1 0.4 0.2 0.1 0.04 0.02 0.01 0.6
T J = 25C Pulse Width = 300S 2% Duty Cycle
20
160
180
1.4
Reverse Characteristics
TJ = 150C
TJ = 100C
T J = 25C
100
140
1N4001-1N4007, Rev. A1
White (Anode)
Red/Blue (Cathode)
T50R
TNR Options
1N4744A A2
T50A Option
406mm x 267mm x 184mm Intermediate Container (50,000 cap) for T50A option
MM
64.00 +1.69/ -0.69 52 0.69 5.08 0.40 1.2(max) 0.55(max) 0.69 3.2(min) 0 0.69
MILS
2519 +66.5/ -27.0 204727 200 15.7 47(max) 22(max) 27 126(min) 0 27
NOTES
Overall width
Inside Tape Spacing Component Pitch Component Misalignment Tape Mismatch Units in line w/ one another Lead amount between tapes Lead amount beyond tapes Delta between two leads
L2
E F G
E C D
H L1-L2
REEL DIMENSIONS
ITEM DESCRIPTION D1 Reel Diameter D2 Arbor Hole Diameter (Standard) Core Diameter Flange to Flange Outer Width D1 D2 D3 W1 10.375 1.245 3.190 10.625 1.255 3.310 3.400 SYMBOL MINIMUM MAXIMUM
W1
D3
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx Bottomless CoolFET CROSSVOLT DOME E2CMOSTM EnSignaTM FACT FACT Quiet Series FAST
DISCLAIMER
FASTr GlobalOptoisolator GTO HiSeC ISOPLANAR MICROWIRE OPTOLOGIC OPTOPLANAR PACMAN POP
PowerTrench QFET QS QT Optoelectronics Quiet Series SILENT SWITCHER SMART START SuperSOT-3 SuperSOT-6 SuperSOT-8
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. G