Beruflich Dokumente
Kultur Dokumente
Preferred Device
Small Compact Surface Mountable Package with J-Bend Leads Rectangular Package for Automated Handling High Temperature Glass Passivated Junction Low Forward Voltage Drop (1.05 Volts Max @ 1.0 A, TJ = 150C)
http://onsemi.com
Mechanical Characteristics:
Case: Epoxy, Molded Weight: 70 mg (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds Shipped in 12 mm Tape and Reel, 5000 units per reel Polarity: Polarity Band Indicates Cathode Lead ESD Protection: Human Body Model > 4000 V (Class 3) ESD Protection: Machine Model > 400 V (Class C) Marking: U4J
MARKING DIAGRAM
U4J
Preferred devices are recommended choices for future use and best overall value.
TJ
- 65 to +175
MURA160T3
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, Junction to Lead (TL = 25C) (Note 1) Thermal Resistance, Junction to Ambient (Note 1) Symbol PsiJL (Note 2) RJA Max 24 216 Unit C/W
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 3) (iF = 1.0 A, TJ = 25C) (iF = 1.0 A, TJ = 150C) Maximum Instantaneous Reverse Current (Note 3) (Rated dc Voltage, TJ = 25C) (Rated dc Voltage, TJ = 150C) Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 A/s) vF 1.25 1.05 iR 5.0 150 trr 75 ns A Volts
1. Rating applies when surface mounted on the minimum pad size recommended, PC Board FR-4. 2. In compliance with JEDEC 51, these values (historically represented by RJL) are now referenced as PsiJL. 3. Pulse Test: Pulse Width = 300 s, Duty Cycle v 2.0%.
TJ = 175C
1000
10 TJ = 100C 1
TJ = 175C 100
10
TJ = 100C
0.1
TJ = 25C
0.01 0 100 200 300 400 500 600 VR, REVERSE VOLTAGE (VOLTS)
10 TC = 175C
100C 25C
10 TC = 175C
100C 25C
0.1
0.1
0.01 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 VF, INSTANTANEOUS VOLTAGE (VOLTS)
0.01 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 VF, INSTANTANEOUS VOLTAGE (VOLTS)
http://onsemi.com
2
MURA160T3
25 NOTE: TYPICAL CAPACITANCE AT 0 V = 24 pF 30 25 C, CAPACITANCE (pF) 20 15 10 5 0 0 4 8 12 16 20 24 28 32 36 40 0 4 8 12 16 20 24 28 32 36 40 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) NOTE: MAXIMUM CAPACITANCE AT 0 V = 27 pF
C, CAPACITANCE (pF)
20
15
10
5 0
1 0.9 0.8 0.7 0.6 SQUARE WAVE 0.5 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 120 140 160 180 TA, AMBIENT TEMPERATURE (C) dc
4 dc 3 SQUARE WAVE 2
4.5 4 dc 3.5 3 SQUARE WAVE 2.5 2 1.5 1 0.5 0 0 0.5 1 1.5 2 2.5 3 3.5 IF(AV), AVERAGE FORWARD CURRENT (AMPS)
http://onsemi.com
3
MURA160T3
PACKAGE DIMENSIONS
0.157 4.0
0.0787 2.0
0.0787 2.0
inches mm
SMA FOOTPRINT
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
http://onsemi.com
4
MURA160T3/D
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.