Beruflich Dokumente
Kultur Dokumente
05-02-07
Page 1
Page 2
Page 3
Attach hand rails and toe boards to posts with 5/16 x bin bolts.
Page 4
Page 5
Part Identification
Page 6
Page 7
4 Step Section
3 Step Section
Page 8
Page 9
Page 10
Page 11 HANDRAIL
Page 12
Page 13 HANDRAIL
Attach bolting angles to angle under walkway section with 5/16 x bin bolts. Adjust width of bolting angle so that bolting angles can be attached to roof panel ribs. Field drill holes in roof panel ribs and attach bolting angle with 5/16 x bin bolts.
On V Rib roof panels field drill holes on top of the V Rib and attach bolting angle with 5/16 x bin bolts.
Page 14
On single piece roofs (CB12 CB20), use all short bolting angles. On 2 piece roofs (CB22 CB50), use tall bolting angles on lower roof and short bolting angles on upper roof.
Page 15 HANDRAIL
Attach posts to steps with 5/16 x bin bolts. 1st post on manhole side is left off to allow access to manhole.
Page 16
Page 17 HANDRAIL
Page 18
Page 19 HANDRAIL
If walkway is going to be used with peak platform, attach stairs to platform post with brackets as shown. Holes will need field drilled into peak post to attach brackets.
Page 20
CHIEF INDUSTRIES, INC. Agri/Industrial Division Chief Industries, Inc. 4400 East 39th Kearney, NE
Page 21 HANDRAIL MANUAL ROOF WALKWAY & PEAK