Beruflich Dokumente
Kultur Dokumente
JRM deep tines have become an industry standard over the last 13 years. All JRM deep tines are made from the finest materials available and to exacting standards. The DILLENNIUM deep tine is an excellent option in many situations and can, in specific situations, save you both time and money. A DILLENNIUM tine should be chosen for ground that is aerified on a regular basis, or greens and fairways with little or no rock. If one is likely to bend or break a large number of deep tines (greater than 30%) then the JRM premium deep tine might be the better option. However, if bending or breaking is not a concern then a DILLENNIUM tine should be the product of choice. Why? They will outlast a premium deep tine more than two to one, which means a significant savings in the total cost of tines used. Remember, JRM deep tines can be used for a variety of purposes, including race tracks (where solid and coring deep tines are a popular choice), sports fields and landscaping. For the smaller diameter tines, we have a selection of fixed shank, and shank, roll pin, and tube options. Once you order a full part, not including the fixed shanks, you can simply order a replacement tube, slip out the shank from your old tine, hammer in the roll pin, and, just like that, you have a new part. JRM carries a large selection of Soil Reliever, VERTIDRAIN, and Wiedenmann specific deep tines as well as an extensive line of solid deep tines and replacement tubes. Our Wiedenmann tines are the newest line of our deep tines, and they are made of the same highgrade steel alloy as all other JRM deep tines. The 1:10 conical mount tines feature the required screw mount unique to Wiedenmann. They also come with a detachable shank, making it available to order replacement tubes on your next purchase. The replacement tubes are located on page 32. The 12mm WT mounts have the unique dimple that is also required for Wiedenmann deep tine aerifiers. Wiedenmann OEM tines do not have a replacement tube option. This JRM feature offers the possibility of significant cost savings. All standard JRM warranties apply.
30
2WT750103
2WT500103
2WT750103
1WT100102
1WT625502 1WT375102
2DT100103
2DT750107 2DT500106
2DT312102 3DT100505
1DT750105
1DT125504
1DT112105
1DT375101
1DT625503
1DT750105
1DT812503
1DT100105
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
DEEP TINES
DEEP TINES for VERTI-DRAIN
Part No.
1DT375101 1DT375501 1DT625103 1DT625503 1DT625105 1DT625505 1DT750101 1DT750106 1DT750506 1DT750102 1DT750105 1DT750505
NEW 1DT812111 NEW 1DT812511
Fits VERTI-DRAIN Only Tines complete, includes shank, roll pin, and tube
Total Length Working Depth
6" 6.125" 8.17" 8.40" 8.17" 8.40" 9.3 11.375" 11.5" 9.77" 11.75" 12" 9.3 9.55 11.375" 11.5" 13.375" 13.5" 9.77" 10.02" 11.75" 11.75" 13.75" 14" 9.75" 11.75" 12" 11.75" 14" 14.25" 12.5" 12" 14" 14.25" 5" 5.125" 7" 7.25" 7" 7.25" 8" 10" 10.25" 8" 10" 10.25" 8" 8.25" 10" 10.25" 12" 12.25" 8" 8.25" 10" 10.25" 12" 12.25" 8" 10" 10.25" 10" 12" 12.25" 10" 10" 12" 12.25"
JRM Description
Premium 3/8" fixed shank Deep Tine DILLENNIUM 3/8" fixed shank Deep Tine Premium 5/8" Deep Tine DILLENNIUM 5/8" Deep Tine Premium 5/8" fixed shank Deep Tine DILLENNIUM 5/8" fixed shank Deep Tine Premium 3/4" Deep Tine Premium 3/4" Deep Tine DILLENNIUM 3/4" Deep Tine Premium 3/4" Deep Tine Premium 3/4" Deep Tine DILLENNIUM 3/4" Deep Tine Premium 13/16" Deep Tine DILLENNIUM 13/16 Deep Tine Premium 13/16" Deep Tine DILLENNIUM 13/16" Deep Tine Premium 13/16" Deep Tine DILLENNIUM 13/16" Deep Tine Premium 13/16" Deep Tine DILLENNIUM 13/16" Deep Tine Premium 13/16" Deep Tine DILLENNIUM 13/16" Deep Tine Premium 13/16" Deep Tine DILLENNIUM 13/16" Deep Tine Premium 1" Deep Tine Premium 1" Deep Tine DILLENNIUM 1" Deep Tine Premium 1 1/8" Deep Tine Premium 1 1/4" Deep Tine DILLENNIUM 1 1/4" Deep Tine Premium 1 1/8" Deep Tine Premium 1 1/4" Deep Tine Premium 1 1/4" Deep Tine DILLENNIUM 1 1/4" Deep Tine
Mount Diameter
5/16" 5/16" 12mm 12mm 12mm 12mm 12mm 12mm 12mm 18mm 18mm 18mm 12mm 12mm 12mm 12mm 12mm 12mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 24mm 24mm 24mm 24mm
I.D.
.240" .240" .400" .350" .400" .350" .450" .450" .440" .450" .450" .440" .510" .490 .510" .490" .510" .490" .510" .490" .510" .490" .510" .490" .625" .625" .590" .750" .812" .800" .750" .812" .812" .800
O.D.
.330" .327" .625" .625" .625" .625" .750" .750" .750" .750" .750" .750" .812" .812" .812" .812" .812" .812" .812" .812" .812" .812" .812" .812" 1" 1" 1" 1.125" 1.25" 1.25" 1.125" 1.25" 1.25" 1.25"
Wall
.060" .060" .072" .072" .072" .072" .095" .095" .095" .095" .095" .095" .105" .105" .105" .105" .105" .105" .105" .105" .105" .105" .105" .105" .120" .120" .120" .120" .135" .135" .120" .135" .135" .135"
Price
$6.40 $11.45 $11.85 $18.05 $10.40 $16.25 $18.60 $20.75 $31.15 $18.60 $20.75 $31.15 $20.55 $29.85 $22.95 $26.45 $26.45 $35.90 $20.55 $29.85 $22.95 $32.25 $26.45 $35.90 $26.20 $28.65 $39.75 $31.70 $36.60 $42.05 $31.70 $34.40 $36.60 $42.05 $10.00
1DT812102 1DT812502 1DT812108 1DT812508 1DT100101 1DT100105 1DT100505 1DT112104 1DT125104 1DT125504 1DT112106 1DT125103 1DT125105 1DT125505
Shanks are available for all Fairway Tines. Contact our customer service department for the correct shank.
Please note: As a matter of convention in the turf industry, all deep tine shanks are made to metric standards. The mounting blocks used by deep tine machine manufacturers are made to these metric sizes. This is not true of conventional aerifiers since most of these machines are made in the United States. Refer back to page 5 if you have any questions about choosing the correct mount diameter for your tines.
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
31
DEEP TINES
Deep TInes for Soil Reliever
Part No.
1DT625104 1DT625504 1DT625106 1DT625506 1DT750107 1DT750507 1DT812104 1DT812504 1DT812107 1DT812507 1DT750108 1DT750508 1DT812106 1DT812506 1DT812109 1DT812509 1DT100107 1DT100507 1DT112105 1DT125102 1DT125104 1DT125504 1DT125103
Fits Soil Reliever Only Tines complete, includes shank, roll pin, and tube
Working Depth
7" 7.25" 7" 7.25" 10" 10" 10" 10.25" 12" 12.25" 10" 10" 10" 10.25" 12" 12.25" 10" 10.25" 10" 10" 12" 12.25" 10"
JRM Description
Premium 5/8" Deep Tine DILLENNIUM 5/8" Deep Tine Premium 5/8" fixed shank Deep Tine DILLENNIUM 5/8" fixed shank Deep Tine Premium 3/4" Deep Tine DILLENNIUM 3/4" Deep Tine Premium 13/16" Deep Tine DILLENNIUM 13/16" Deep Tine Premium 13/16" Deep Tine DILLENNIUM 13/16" Deep Tine Premium 3/4" Deep Tine DILLENNIUM 3/4" Deep Tine Premium 13/16" Deep Tine DILLENNIUM 13/16" Deep Tine Premium 13/16" Deep Tine DILLENNIUM 13/16" Deep Tine Premium 1" Deep Tine DILLENNIUM 1" Deep Tine Premium 1 1/8" Deep Tine Premium 1 1/4" Deep Tine Premium 1 1/4" Deep Tine DILLENNIUM 1 1/4" Deep Tine Premium 1 1/4" Deep Tine
Total Length
9" 9.25" 9" 9.25" 12" 12.25" 12" 12.25" 14" 14.5" 12" 12.25" 12" 12.25" 14" 14.25" 12" 12.25" 12" 12" 14" 14.25" 12"
Mount Diameter
12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 24mm
I.D.
.400" .350" .400" .350" .450" .440" .510" .490" .510" .490" .450" .440" .510" .490" .510" .490" .625" .590" .750" .812" .812" .800" .812"
O.D.
.625" .625" .625" .625" .750" .750" .812" .812" .812" .812" .750" .750" .812" .812" .812" .812" 1" 1" 1.125" 1.25" 1.25" 1.25" 1.25"
Wall
.072" .072" .072" .072" .095" .095" .105" .105" .105" .105" .095" .095" .105" .105" .105" .105" .120" .120" .120" .135" .135" .135" .135"
Price
$11.85 $18.05 $10.40 $16.25 $20.75 $31.15 $22.95 $32.25 $26.45 $35.50 $20.75 $31.15 $22.95 $32.25 $26.45 $35.90 $28.65 $39.75 $31.70 $33.85 $36.60 $42.05 $34.40 $10.00
Shanks are available for all Fairway Tines. Contact our customer service department for the correct shank.
Please note: As a matter of convention in the turf industry, all deep tine shanks are made to metric standards. The mounting blocks used by deep tine machine manufacturers are made to these metric sizes. This is not true of conventional aerifiers since most of these machines are made in the United States. Refer back to page 5 if you have any questions about choosing the correct mount diameter for your tines.
For Soil Reliever-SR, VERTI-DRAIN-VD, and Wiedenmann-W Replacement tubes-tubes only, includes roll pin
Mount Diameter
12mm 12mm 12mm, 18mm 12mm, 18mm 12mm, 18mm 12mm, 18mm 12mm, 18mm 12mm, 18mm 12mm, 18mm 12mm, 18mm 12mm, 18mm 18mm 18mm 24mm 18mm 18mm, 24mm 18mm, 24mm 18mm, 24mm 18mm, 24mm
JRM Description
Premium 5/8" replacement tube DILLENNIUM 5/8" replacement tube Premium 3/4" replacement tube Premium 3/4" replacement tube DILLENNIUM 3/4" replacement tube Premium 13/16" replacement tube DILLENNIUM 13/16" replacement tube Premium 13/16" replacement tube DILLENNIUM 13/16" replacement tube Premium 13/16" replacement tube DILLENNIUM 13/16" replacement tube Premium 1" replacement tube DILLENNIUM 1" replacement tube Premium1" replacement tube Premium1 1/8" replacement tube Premium1 1/4" replacement tube DILLENNIUM 1 1/4" replacement tube Premium1 1/4" replacement tube DILLENNIUM 1 1/4" replacement tube
Tube Length
7" 7.25" 8" 10" 10.25" 8" 8.25" 10" 10.25" 12" 12.25" 10" 10.25" 8" 10" 10" 10.25" 12" 12.25"
Replacement Description
SR, VD, W SR, VD, W SR, VD, W SR, VD SR, VD SR, VD, W SR, VD, W SR, VD, W SR, VD, W SR, VD, W SR, VD, W SR, VD, W SR, VD, W SR,VD, W SR, VD SR, VD SR, VD SR, VD SR, VD
Price
$8.90 $14.75 $14.75 $16.95 $25.15 $16.20 $31.15 $18.20 $27.30 $20.20 $34.95 $22.95 $33.30 $20.75 $26.20 $28.40 $38.80 $31.50 $39.75 $10.00
Shanks are available for all Fairway Replacement Tubes. Contact our customer service department for the correct shank.
Important note: Our shanks cannot be used with OEM tubes and our tubes cannot be used with OEM shanks.
32
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
DEEP TINES
Solid Deep Tines
Part No.
2DT200101 2DT312102 2DT312103 2DT312105 2DT375101 2DT500102 2DT500105 2DT500106 2DT500107 2DT750105 2DT750106 2DT750107 2DT750108 2DT100103
JRM Description
Premium 3/16" Solid Deep Tine Premium 5/16" Solid Deep Tine Premium 5/16" Solid Deep Tine Premium 5/16" Solid Deep Tine Premium 3/8" Solid Deep Tine Premium 1/2" Solid Deep Tine Premium 1/2" Solid Deep Tine Premium 1/2" Solid Deep Tine Premium 1/2" Solid Deep Tine Premium 3/4" Solid Deep Tine Premium 3/4" Solid Deep Tine Premium 3/4" Solid Deep Tine Premium 3/4" Solid Deep Tine Premium 1" Solid Deep Tine
Working Depth
4" 6" 8" 10" 9.9" 6" 10" 12" 14" 10" 12" 14" 16" 16"
Shank Diameter
3/16" 5/16" 5/16" 5/16" 5/16" 12mm 12mm 12mm 12mm 18mm 18mm 18mm 18mm 24mm
O.D.
.1875" .3125" .3125" .3125" .375" .472" .472" .472" .472" .708" .708" .708" .708" .945"
Price
$2.10 $2.50 $3.45 $3.55 $3.65 $3.30 $5.75 $6.30 $7.95 $8.65 $9.40 $10.85 $11.90 $15.60
JRM Description
Premium 3/8" fixed shank deep tine Premium 3/8" fixed shank deep tine Premium 1/2" fixed shank deep tine Premium 5/8" fixed shank deep tine Premium 5/8" fixed shank deep tine Premium 13/16" deep tine DILLENNIUM 13/16" deep tine
Total Length
6" 6.125" 5.615" 8.264" 8.5" 7.3" 7.3" 10" 10.25" 11.3" 11.55" 10" 10.25" 12" 12.25" 10.5 10.5 12.25" 12.5" 7.875" 9.5" 12" 14" 8.625" 10.875" 11" 13.25" 13.25" 5.5 5.5
Working Depth
4.82" 4.82" 4.315" 7" 7.25" 6" 6" 8" 8.25" 10" 10.25" 8" 8.25" 10" 10.25" 8 8" 10" 10.25" 6" 8" 10.5" 12.5" 6.5" 8.75" 8.875" 11" 11" N/A N/A
Mount Diameter
8mm dimple 12mm dimple 12mm dimple 12mm dimple 12mm dimple 12mm dimple 12mm dimple 12mm dimple 12mm dimple 12mm dimple 12mm dimple 1:10 cone mount 1:10 cone mount 1:10 cone mount 1:10 cone mount 12mm dimple 1:10 cone mount 1:10 cone mount 1:10 cone mount 8mm dimple 12mm dimple 12mm dimple 12mm dimple 1:10 cone mount 1:10 cone mount 1:10 cone mount 1:10 cone mount 1:10 cone mount 12mm dimple 12mm dimple
I.D.
.220" .220" .336" .400" .350" .510" .490" .510" .490" .510" .490" .510" .490" .510" .490" .626 .626" .626" .590" Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid
O.D.
.410" .410" .520" .625" .625" .812" .812" .812" .812" .812" .812" .812" .812" .812" .812" 1 1" 1" 1" .312" .472" .472" .472" .708" .708" .708" .708" 1" 1/2 1/2
Wall
.049" .049" .055" .072" .072" .105" .105" .105" .105" .105" .105" .105" .105" .105" .105" .120 .120" .120" .120" Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid
Price
$12.05 $12.05 $14.75 $14.75 $19.15 $16.95 $25.15 $22.95 $31.15 $22.95 $31.15 $22.95 $31.15 $28.40 $39.75 $24.40 $26.40 $28.40 $39.75 $3.75 $5.10 $5.95 $6.50 $8.30 $8.30 $9.30 $9.30 $10.90 $8.50 $12.55 $10.00
NEW 1WT812105 Premium 13/16" deep tine NEW 1WT812505 DILLENNIUM 13/16" deep tine
1WT812101 1WT812501
NEW 1WT812104 Premium 13/16" deep tine NEW 1WT812504 DILLENNIUM 13/16" deep tine
1WT812102 1WT812502
NEW 1WT100101 Premium 1 deep tine NEW 1WT100104 Premium 1" deep tine
1WT100102 1WT100502 2WT312102 2WT500101 2WT500102 2WT500103 2WT750103 2WT750102 2WT750104 2WT750101 2WT100101 2WX500112 2WX500512
Premium 1" deep tine DILLENNIUM 1" deep tine Solid 5/16" deep tine Solid 1/2" deep tine Solid 1/2" deep tine Solid 1/2" deep tine Solid 3/4" deep tine Solid 3/4" deep tine Solid 3/4" deep tine Solid 3/4" deep tine Solid 1" deep tine Premium CROSSTINE 1/2 rib (for Wiedenman) DILLENNIUM CROSSTINE 1/2 rib (for Wiedenman)
Shanks are available for all Fairway Tines. Contact our customer service department for the correct shank.
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
Please note: As a matter of convention in the turf industry, all deep tine shanks are made to metric standards. The mounting blocks used by deep tine machine manufacturers are made to these metric sizes. This is not true of conventional aerifiers since most of these machines are made in the United States. Refer back to page 5 if you have any questions about choosing the correct mount diameter for your tines.
33
1ES875102
JRM Description
3/8" JRM Economy Tine 3/8" JRM Economy Tine 1/2" JRM Economy Tine 1/2" JRM Economy Tine 1/2" JRM Economy Tine 5/8" JRM Economy Tine 5/8" JRM Economy Tine 5/8" JRM Economy Tine 3/4" JRM Economy Tine 3/4" JRM Economy Tine 3/4" JRM Economy Side-eject Rolled Tine 7/8" JRM Economy Side-eject Rolled Tine
Length
4.5" 5" 4.5" 5" 6" 4.5" 5" 6" 5" 6.25" 5.5" 5.5"
Mount Diameter
3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 7/8" 7/8" 3/4" 7/8" 1N750102
I.D.
.350" .350" .445" .445" .445" .545" .545" .545" .635" .635" .610" .610"
O.D.
.625" .625" .750" .750" .750" .750" .750" .750" .875" .875" .875" .875"
Wall
.055" .055" .055" .055" .055" .055" .055" .055" .070" .070" .134" .134"
Price
$2.75 $2.90 $2.55 $2.65 $2.80 $2.55 $2.65 $2.85 $3.50 $3.80 $3.55 $3.55
1N100103
JRM Description
JRM Closed Spoon 1" split, two-hole mount JRM Closed Spoon 3/4" split, one-hole mount
Total Length
8.5" 7.5"
Replacement Descritpion
Hahn-Westpoint .9" and similar {H-W3556] Ryan Renovaire-Tracaire .9" and similar
Price
$4.59 $4.59
Rotary Blades
JRM Rotary blades are made from the finest material available, 4140 high-grade alloy steel. These top-quality rotary blades will hold an edge longer and wear longer than most OEM blades. JRMs superior quality rotary blades are less likely to break or chip and provide exceptional performance when compared to the original factory blades. JRM added two mulching blades to its line in 2009, and they have quickly become great sellers, particularly the 4TR2675EM, which fits the Toro 4500D, 4700D, and the 3500D Sidewinder. The 4TR2175EM fits the Toro 4000D.
Rotary Blades
Part No.
4JR20101 4JL12101 4JR12102 4TR072101 4HR072101 4TR2675EM 4TR2175EM
4TR072101
4TR2675EM
JRM Description
Jacobsen Rotary Push Mower Blade Jacobsen Rotary Blade Jacobsen Rotary Blade Toro Rotary Blade Toro Rotary Blade Toro Rotary Blade Toro Rotary Blade
Replacement Descritpion
20" cut OEM #330719 23" Width (Left blade) for HR51-11 (3 required) OEM #391040 23" Width (Right blade) for HR51-11 (4 required) OEM #391039 72" cut for Groundsmaster OEM #29-5530 72" cut for XL Hustler OEM #754853 Mulching, 26 3/4" Blade, OEM# 107-0235-03 Mulching, 21 3/4" Blade, OEM# 107-0214-03
Price
$13.77 $19.41 $19.41 $21.31 $19.52 $19.95 $19.35
34
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
CUTTING BLADES
DILLENNIUM Graden cutting blades
Part No.
4G031501 4G060501 4G072501 4G125501
JRM Description
1/32" DILLENNIUM Graden blade 1/16" DILLENNIUM Graden blade 1/10" DILLENNIUM Graden blade 1/8" DILLENNIUM Graden blade
Replacement Descritpion
Graden Verti-cut machine, 1mm blade Graden Verti-cut machine Graden Verti-cut machine, 2mm blade Graden Verti-cut machine, 3mm blade
Width
.045" .075" .100" .125"
Price
$27.64 $27.64 $27.64 $27.64
A Graden walk-behind machine requires 15 blades. Also fits Mataway machines and most stick edgers.
4G072501 4R105101 4T041101
JRM Description
1/32" Mataway Blade 1/16" Mataway Blade 1/8" Mataway Blade Star Verti-cut blade
Replacement Descritpion
1/32" Ryan Mataway Machine 1/16" Ryan Mataway Machine 1/8" Ryan Mataway Machine 1/32" Toro Reel Verti-cut blade OEM# 17-1590; 111 required
Price
$2.16 $2.32 $2.90 $3.06
JRM now offers Thatch Master 7 pt. carbide-tip blades that will fit the Thatch Master TM-360, TM-480, TM-600, and TM-720. The TM-360 and TM-480 machines are ideal for golf course greens. The thin 2mm blades with their forward rotation slice through the grass with a clean cut that heals fast. We also have spacers available for the Thatch Master blades. Recommended spacing is inch (144 spacers) for the TM-360, and 1 inch (192 spacers) for the TM-480. The TM-600 and TM-720 are ideal for large turf areas like sports fields and golf course fairways. The 3mm blades give more hours of use and faster travel speeds. Recommended spacing is 1 inches (240 spacers) for the TM-600, and 2 inches (288 spacers) for the TM-720.
JRM Description
2mm Carbide-Tip Cutting Blade for TM-360, TM-480 3mm Carbide-Tip Cutting Blade for TM-600, TM-720
Replacement Descritpion
Spacers for Thatch Master 7 pt. Carbide-Tip Blades for TM-360, TM-480, TM-600, TM-720
JRM Description
DILLENNIUM Vortex Verti blade DILLENNIUM Vortex Verti blade DILLENNIUM Vortex Verti blade DILLENNIUM Vortex Verti blade DILLENNIUM Vortex Verti blade DILLENNIUM Vortex Verti blade Vortex Verticut 1/4" Spacer for Jacobsen Mowers
Replacement Descritpion
Hexagonal mount, 2mm for John Deere Hexagonal mount, 1.2mm for John Deere Square mount, 2mm for Jacobsen/Ransome Square mount, 1.2mm for Jacobsen/Ransome Hexagonal mount, 2mm for Toro Hexagonal mount, 1.2mm for Toro Spacers attachable for spacing of 1/2", 3/4", 1"
Price
$11.39 $11.71 $11.39 $11.71 $11.39 $11.71 $.75
Part No.
John Deere
Spacer Size
1/2 3/4 1
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
35
Mounting Blocks
JRM Description
3/8 Quad Block for Toro Walking Greens Aerier 3/8 Quad Block for John Deere 1500 (also fits 2000) 9 long, 7 holes 1/2 SuperQuad Block for Toro Walking Greens Aerier 1/2 SuperQuad Block for John Deere 1500 (also fits 2000) 9 long, 7 holes 5/8 MagQuad Block for Toro, accepts 5/8 mounts only, 6 holes 5/8 MagQuad Block for John Deere 1500 (also fits 2000) 9 long, 7 holes
Price
$87.40 $120.20 $120.20 $120.20 $163.80 $163.80
01
03
01
02
02
51
51
01
01
51
1B 37
1B 37
1B 50
1B 50
1B 62
Please note that Tine Holders are specific to certain manufacturers and are very unlikely to work on alternative brands as tines might. Tine Holders are usually purchased in sets of four or more (typically one for each arm on the aerification machine). All JRM Tine Holders are made of high-grade steel and will offer many years of excellent service.
Rake Prongs
Part No.
9T375100
NEW 9T375150
9T375100
9T375200
JRM Description
JRM Rake Prong 3.15 long (27 per set) JRM Rake Prong 2.65 long (27 per set) JRM Rake Prong Fluff 3.50 long (27 per set) JRM Rake Prong Fluff 3 long (27 per set)
O.D.
3/8 3/8 N/A N/A
I.D.
Solid Solid Solid Solid
Replacement Description
For Toro Sand Pro For Toro Sand Pro For Toro Sand Pro For Toro Sand Pro
1B 62
51
03
Price
$2.05 $2.00 $2.85 $2.80
9T375200
NEW 9T375250
Adapter Rings
Part No.
9R375106 9R375107 9R375108 9R625102
9R375106
JRM Description
Adapter Ring for 5 Rhino and 1/4, 1/2 Solid Tine Adapter Ring for 5 Rhino and 1/4, 1/2 Solid Tine Adapter Ring Adapter Ring
O.D.
5/8 3/4 3/4 3/4
I.D.
.500 .500 .375 .625
Replacement Description
For John Deere & Toro 5/8 Mounting Block For John Deere & Toro 3/4 Mounting Block
Price
$6.55 $6.55 $6.55 $6.55
Adapter Rings are used to up size a tine so that it will work in a mounting block that is larger. Adapter Rings will not work with any top eject coring tine.
JRM Description
Universal depth gauge for groomers, 5 height guides set at 1/16 apart
Price
$31.75
4GHG750375
36
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
JRM PRODUCTS
Ordering JRM Products
You have a variety of convenient options for ordering JRM products.
ORDERING
Authorized Dealer
In most locations you will have an authorized JRM Dealer who is responsible for your area. You should look to your JRM Dealer as your first line of help in ordering or when you have a question about an existing order. If you need help finding your local dealer, please contact us at our toll free Customer Support Line (888-576-7007) or you may go to the JRM website at www.jrmonline.com for a complete listing of our dealers.
Direct
Order directly from us by telephone or fax. You may call our toll free telephone number (888-576-7007) from within the United States or our toll line (336-354-1243) from anywhere during regular business hours (8:30 a.m.-5:30.p.m. Eastern Standard Time). You may also send us a facsimile on our fax order line at 336-354-1255. Please be careful to include all necessary information: ship-to; bill-to; number of items by part number; credit information (if a first time customer); and specific shipping information. All orders are subject to credit consideration.
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
37
WARRANTY
INFORMATION
JRM products are made of the very finest materials available and are warranted against any defect in manufacturing
or materials. JRM DILLENNIUM top-eject coring tines used on conventional aerification machines having uniform wear on golf course greens have a use warranty of a minimum of 18 greens or 130,000 Square Feet, whichever comes first. This revolutionary use warranty is only applicable for use on golf greens. The JRM warranty does not cover chipping which may occur if a large rock or cart-path is hit. This use warranty does not extend to any solid or side-eject tine due to the weaker wall structure, the DILLENNIUM Quad, DILLENNIUM Lite, or SuperQuad tines due to their thinner wall construction, or any Deep Tine. In most cases you can expect to get six to ten times the life of any other conventional aerification tine with our DILLENNIUM tines. The JRM use warranty only covers conventional top-eject coring tines used on golf course greens (tees and fairways are specifically excluded). Uniform wear means that the wear pattern is uniform on all sides of the tine indicating proper machine timing. If you have any questions concerning a warranty issue on any JRM product, you should immediately contact your Authorized JRM Dealer or call JRM directly at 1-888-JRM-7007. You will be given a Return Authorization Number [RA] that should be prominently displayed on the outside of the shipping container. All warranty returns must be accompanied by a Return Authorization Number. No credit will be issued for any items returned to JRM without a proper RA number. Requests for returned goods must be made within three months of purchase. JRM reserves the right to refuse credit if the tines have excessive wear on one side and therefore do not have a uniform wear pattern. A 15% Restocking Charge will be applied to any return other than authorized Warranty Returns with a JRM RA number clearly shown within three months of invoice. JRM reserves the right to refuse credit for any returned item (other than a warranty return) that is not in like new condition available for immediate sale. All decisions by JRM are final. If there are parts missing from any shipment that are listed on the packing slip it is very important that the shipping box NOT be discarded. For JRM to be reimbursed by the carrier, an inspection of the box is required. If parts are missing, please contact the JRM Customer Support department immediately to make arrangements to obtain replacement parts. At JRM we are very proud of our products and intend for them to be the very finest available in the turf industry. For this reason we ask that you contact us immediately if you have any warranty problem(s). With your cooperation we will be able to continue to improve our products and protect you, our valued customer. Timing Problems If an aerification machine is out of timing it will greatly reduce the use-life of your tines. A clear and inescapable indicator of both good and bad timing is the wear pattern on a used set of tines. Indeed, the age of a machine is no guarantee against timing problems since new machines are often delivered out of timing. A well set up machine, in good timing, will produce a wear pattern that is even all the way around the bottom of the tine. This is absolute and inescapable objective evidence that is true of all aerification machines and all tines. It is not required that a machine be in perfect timing for it to provide good and acceptable service. However, a machine that is badly out of timing will wear out any tine significantly faster and increase the total cost of aerification. With the advent of the JRM DILLENNIUM tines, this wear pattern has become much more evident since the tines will last significantly longer. Problems with machine timing have not been noticed previously since the available tines were so soft that they would wear away at such an extremely fast rate. Return To: JRM, Inc. Return Goods Dept. 8491 N. NC Hwy. 150 Clemmons, NC 27012
38
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
USAGE
Timing Problems
FIG. #1 is a clear exception to the JRM Warranty. This tine was used on an aeri cation machine with a severe timing problem. No credit would be given for this tine.
FIG. #1
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
SHIPPING &
CONTACTING JRM
Shipping & Contact Information
Domestic Shipping
All JRM shipments will be by Standard Ground unless otherwise requested in advance. All shipments are F.O.B. Clemmons, North Carolina. In most cases, if an order is received at our Sales & Marketing office in Clemmons, North Carolina before 4:00 p.m. EST, we will be able to ship the same day. In addition to the standard ground shipping, we can ship Overnight, 2nd Day, or 3 Day upon special request. We recommend that customers west of the Mississippi consider shipping by 3 day if the products are needed in less than ten days to two weeks. Larger orders may require special packaging and shipment by common carrier.
International Orders
nternational shipments will be shipped as requested and in a wooden box suitable for weights in excess I of 50 Kg. (110 lb). Electronic wire transfer payments are accepted. Credit arrangements must be made in advance of shipment or charged to a credit card.
Internet Orders
arranty returns from online orders and warranty issues will be processed under the same guidelines as W any other JRM order.
JRM Dealers
JRM has many dealers domestically and internationally who are authorized to sell JRM products in designated areas defined by the ship to zip code and country codes. If you are not certain who your Authorized JRM Dealer is, please call us at 888-JRM-7007 (888-576-7007) or go to our website at www. jrmonline.com. About 85% of North America is covered by an Authorized JRM Dealer. Areas not covered by an Authorized JRM Dealer are serviced from our Clemmons, N.C. office. All of our international dealers can be located on our website as well.
Contacting JRM
At JRM we take your opinions very, very seriously. Indeed, it is as a result of customer requests and opinions that we have developed some of our finest products. We want to have your opinions even if they are not complimentary. Naturally, we love to hear positive comments, but it is through constructive criticism that we have often received our most valuable information. If you like JRM products, we very definitely want to hear from you. If you have a problem with one of our products, we want to hear from you even more. Please forward any experiences or requests to:
By mail
By telephone
By E-mail
sales@jrmonline.com
40
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255