Beruflich Dokumente
Kultur Dokumente
B O A T C A R P E T
CARPET/CARPET ADHESIVE
Colours
BLACK SAND ULTRA BLUE (Navy) CORONA (Burgundy MIDNIGHT (Charcoal) GUNMETAL (Grey)
BLACK
SAND
N/A
ULTRA BLUE
CORONA
MIDNIGHT
GUNMETAL
Specifications
*FIBER *DENIER *PRIMARY BACKING *SECONDARY BACKING *ROLL LENGTH *STANDARD WIDTHS *SHIPPING WEIGHTS 100% BCF Olefin 2400 Woven Polypropylene Grey Tuf Loc* 100 feet 6 feet & 8 feet 6 feet - 145 lbs. 8 feet - 176 lbs. NOTE: Cut lengths of carpet are NON-RETURNABLE Maximum of 40' x 6' can be shipped UPS Larger lengths can be shipped by truck
*Grey Tuf Loc is a special backing designed for superior tuft lock and ravel reduction. It is light weight, drains easily and is flexible to mold to odd contours.
Description Pontoon Deck Adhesive Carpet Glue 1 Gallon Pail - 3.79 Litre (Covers 65 sq.ft ) Pontoon Deck Adhesive Carpet Glue 3.5 Gallon Pail - 13.25 Litre (Covers 227 sq.ft ) 3M General Trim Adhesive (16.75 oz.) Aerosol for bonding a variety of materials including carpet. Carpet Sample Board
Use for bonding rubber backed, marine grade carpet and polyester, non-woven backed marine grade floor vinyl to marine grade plywood decking Water Base Solvent Free Low Odor Water resistant
1056
459-31400
459-31600
459-31800
H.P. to 15 to 30 3080
Capacity
85 lbs. 130 lbs. 265 lbs.
PWC DOLLY
Excellent for storage or transport. Galvanized tubular frame with four 300 lb. capacity casters. Two 4 ft. carpeted bunks tilt & adjust to 12, 16 or 20 width 1000 lb. capacity 34"W x 48"L x 19"H
ORDER NO. 336-27575
1057
TRAILER ACCESSORIES
LAUNCHING WHEEL
Boat Handling Made Easy! Wheel-a-Weigh launching wheels for small boats and cartoppers ride in tracks permanently installed on the transom. These sturdy units are made of anodized marine aluminum and stainless steel with injection molded wheels. Wheels lock in the down position for transporting over land. Wheels lock in the up position after launching. Wheels are easily removed for storage or to prevent theft. Wheel-a-Weigh launching wheels help you get to and from the water quickly and conveniently. Removal of the two lower lockpins allows the wheels to be pivoted and locked in an upright position. Removal of all four pins releases entire wheel assembly.
ORDER NO. 040-16100
FLEXSTEP
Making boating more convenient than ever! This innovative multi-angle/extendable step system attaches to your trailer frame allowing easy access to anywhere on your boat. A quick locking pin system adjusts the FlexStep to 20 positions for maximum reach. Using just four bolts, washers, and nuts, the FlexStep mounts to your trailer frame with no drilling or welding required. (2"-3" deep by up to 4" wide*) The step platform easily disconnects with a single pin for safe travel, storage, or relocating. *Larger trailer frames may be accommodated by purchasing longer bolts. Lightweight anodized aluminum (6061-T6) 5 Adjustable angles (0, 22, 45, 67, & 90) Extends and retracts from 16" to 22" Quick disconnect - Removable for safe travel and stowing 300 Ib. weight capacity Fits most trailers 14 wide step platform Easy access to tackle box, storage, and boat windshields Attaches to trailer tongue for easy entry Weighs less than 7 Ibs. Anti-corrosion & stainless steel hardware 3M anti-skid grip 3 tube doubles as storage Additional base mount kits are available separately (Special Order only) for mounting the FlexStep to multiple locations on your trailer
Wheel Dim. 16" x 4" Weight Capacity Soft Sand: 200 lbs. Hard Surface: 300 lbs.
1058
Application Fits two 8' Bunks Fits two 5-1/2' Bunks Fits two 10' Bunks Fits two 10' Bunks
BUNKENDERSTM
E-Z Slide BunkEnders are a patented bunk slide designed to curve over the end of your bunk, protecting your boat and your bunk from excessive wear at the initial point of contact. BunkEnders prevent carpet wear Stainless steel mounting screws included Can be used for 4" or 6" wide bunks Recommended for welded metal boats weighing up to 4000 lbs and fiberglass boats weighing up to 1500 lbs. Mfr. No. 013.6 / Kit, Contains 2 Pads
ORDER NO. 968-01360
Black
STICKYBOARDSTM
If you've ever cut your bait or filleted your fish out on the water, you know that boat movement is a fact of life. With the StickyBoard you no longer have to worry about the board sliding off the counter or transom when you are cutting thanks to suction cups that keep it securely anchored. Features: Suction cups securely anchor bait board Stain and odour resistant Dishwasher safe for easy cleaning Commercial grade poly surface will not dull knives Suction cups are removable Small Bait Board: 6" x 10" w/ 2 suction cups Large Bait Board: 9" x 15" w/ 4 suction cups
ORDER NO. 968-00032 968-00034
1059
TRAILER ACCESSORIES
UTILITY CARRIER
500 Ib. carrying capacity Galvanized 20" x 60" deck pan 16 gauge Solid bottom repels road grime Fits all 2" hitch receivers Dimpled floor reduces cargo shifting Installs in minutes Tie down hook slots on all sides 20" x 30" full colour display box
BUNK SLICKS
Bolts directly onto carpeted bunk boards. Fits 2" x 6" or 2" x 4" standard bunk boards. Slide on or off with less effort. Easy to install. Bunk Slicks 1-3/4" x 17"- 8 pieces. Mfr. No. 86170
ORDER NO. 404-86170
1060
TRAILER ACCESSORIES
Sierra Products, Inc., home of Dry Launch and other quality lighting products, is the leader in the design and tooling of lighting applications. Since establishment over 28 years ago, with the markets very first submersible boat trailer light, Sierra Products (Dry Launch) has committed to maintain high quality standards to meet or exceed customer expectations for quality and service through continuous improvement.
* Sidemarker, Clearance, Reflector combined! * Air Trapping * All Lexan Construction... Cant Break it! * Mounting Screws Supplied * ORDER NO. Mfr. No. Description 102-20212 202A2R-9913 Amber w/ Reflectors 102-20222 202R2R-9913 Red w/ Reflectors
1061
TRAILER ACCESSORIES
COMBINA COMBINATION ATION UNDER UNDER 80 TAIL LIGHTS LIGHTS #80 SERIES SERIES
Universal 2 on center stud mounting. Screw-on main and side e marker lens allow for easy bulb replacement. acement. This tail light is designed for a variety of under 80 light-duty uty trailers. Wiring uses the quick connect onnect and disconnect feature. These se tail lights meet FMVSS/CMVSS 108 1 requirements. 4 3/4 x 4 1/2 x 2 9/16 ORDER OR DER NO. NO. 282-23283 282-23284
Mfr. Mf r. No. o. Description
6-Function, Right/Curbside 6 7-Function, Left/Roadside 7 Replacement R l t Lens, L O 80 T Over ail il Tail L Light Lens
WA WATERPROOF ATERPROOF LED L D OVER 80 WRAPLE WRAP PAROUND AROUN DT TAIL AIL LIGHTS LIGHTS
Waterproof su Waterproof surface rface mount tail ail lights. Wrap-around design eliminates minates the need for rear side marker/reector. marker/reecto er/reector. These lights meet FMVSS/ SS/ CMVSS 108 requirements. Plug-in P 12 harness with 2-way at connecconnector and ring terminal ground d wire. Stainless steel mounting hardware rdware included. 7.53 x 3.48 x 3.13 ORDER OR DER NO. NO. 281-59400 281-59500
Mfr. Mf r. No. o. Description
2527511 T railer ler Light Kit w/25 Wire Harness Trailer 54001 54002 Lens s Red, T ail Light w/Screws Tail Lens s Red, Clearance/Side Marker w/Screws Screws
SUBMERSIBLE OVER SUBMERSIBLE OVER 80 4 4X6 X6 LOW W PROFILE TAIL LIGHTS LIGHTS
Unique, compact size and shape hape allows these lights to t where e space is limited. The lens is sonically-sealed ally-sealed to the base providing a bell jar, ja r, making this lamp fully submersible s with easily replaceable bulbs. These lights meet FMVSS/CMVSS MVSS 108 requirements for trailers s over 80 wide when properly mounted. unted. Pre-wired with 2-way molded ed plugs and ring terminal ground for r easy installation. 6 x 3 1/2 x 2 1/4 ORDER OR DER NO. NO. 114-03075 114-03025
Mfr. Mf r. No. o. Description
2523074 7-Function, unction, Right/Curbside 2523024 8-Function, unction, Left/Roadside 54003 Lens s Red, Clearance/Side Marker w/ Screws ews
1062
TRAILER ACCESSORIES
SUBMERSIBLE LED SUBMERSIBLE LED UNDER UNDER 80 COMBINATION C OMBINA ATION TAIL TAIL L LIGHTS LIGHTS
These lights are ideal for boat and PWC trailers less than 80 wide and d meet FMVSS/CMVSS 108 requirements. ments. Stud mounted using 2 O.C. indust ry standard stud conguration. on. Prewired (supply and ground) industry for easy installation. 5.12 x 4.50 x 1.85 w/.86 depth ORDER OR DER NO. NO. 112-28306 112-28356
Mfr. Mf r. No. D Description
WATERPROOF W ATERPROOF LED L D OVER LE OVER 80 3 3X8 X8 LOW L P ROFILE TAIL LIGHTS LIGHTS PROFILE
These waterproof lights meet et FMVSS/CMVSS 108 requirements ts for trailers over 80 wide when properly mounted. Includes stainless ess steel mounting hardware. Includes es 3-wire plug-in harness with 12 wire w leads and 7 ring terminal ground. ground. 8 x 2 7/8 x 2 3/4 ORDER OR DER NO NO. . 114-07530 114-07535
Mfr. Mf r. No. Description
283006 283056
407530 407535
SUBMERSIBLE LED SUBMERSIBLE LED UNDER UNDER 80 COMBINATION C OMBINA ATION TAIL TAIL L LIGHT LIGHT KIT KIT
Complete kit with two tail lights, 25 25 5 trailer wiring harness cable with molded 4-way at prong plug, 4 car ar harness cable with molded 4-way y at prong plug and license plate br bracket. racket. ORDER OR DER NO. NO. 112-28752
Mfr. Mf r. No. Description cription
287512
WATERPROOF W ATERPROOF LED L D OVER LE OVER 80 3 3X8 X8 LOW L PROFILE P ROFILE TAIL LIGHT LIGHT KIT KIT
Kit comes complete with two o low prole tail lights, 25 trailer wiring w harness cable with molded 4-way 4 y plug, p g, 4 four wire car wiring g harness cable with molded 4-way plug ug and license plate bracket. ORDER OR DER NO NO. . 114-07540
Mfr. Mf r. No. Description
407540
WATERPROOF/SEALE WATERPROOF/SEALED WA LED RECESSED RECESSED TAIL L L IGHTS #06 SERIES SERIES S LIGHTS
Oval design allows for installation i in n narrower channels. Hermetically sealed lens prevents corrosion contributed tributed by salt and rain. Structur Structurally immune to extreme heat and cold. old. Lenses meet FMVSS/CMVSS 108 requirements. Rubber grommet et and three wire pigtail can be purchased Mounting pu rchased separately or as a kit. M ounting bracket of 11 ga. steel separately. available separatel y. 6 1/2 x 2 1/4 x 2 3/8 depth, Cutout: out: 6 3/4 x 2 1/2 ORDER OR DER NO. NO. 113-30800 113-30850 113-30860
Mfr. Mf r. No. Description cription
REPLACEMENT L REPLACEMENT LENS, ENS, WRAP-AROUND WRAP-AROUN UND TAIL LI LIGHT GHT
ORDER OR DER NO NO. . 113-33720 113-33730
Mfr. Mf r. No. o. Description
Red Stop/ Stop/Tail/Turn Tail/Turn Light w/Grommet w/Standard tandard Pigtail Red Stop/ Stop/Tail/Turn Tail/Turn Light 6" Oval O Grommet
003372 2 003373 3
Lens, Wrap-Around T Tail ail Light - Left/ Roadside (Reex on T Top) op) Lens, Wrap-Around Tail Tail Light - Right/ Roadside (Reex on T Top) op)
1063
TRAILER ACCESSORIES
WATERPROOF W ATERPROOF O OVER VER 80 3X8 LOW LOW PROFILE P ROFILE TAIL LIGHTS LIGHTS
Featuring a reliable waterproof oof design, these lights have a bulb replaceable capsule that protects the he bulbs from corrosion and thermal al shock but still allows for easy access ess for bulb replacement. These lights hts meet FMVSS/CMVSS 108 requirements ments for trailers over 80 wide when hen properly mounted. 8.03 x 2.94 x 2.83 ORDER OR DER NO NO. . 103-30760 103-30260
Mfr. Mf r. No. Description
403076 7-Function, Right/Curbside, T wo Supply S Two Wires and Ring Terminal Terminal Ground 403026 8-Function, Left/Roadside, Two Two Supply Supply Wires and Ring Terminal Terminal Ground
LED LE D WORK LI LIGHTS GHTS WI WITH TH COILED COILED CORD CORD &M MAGNETIC AGNETIC BASE
LED work lights perfect perfect for exterior r use in AG, horse, livestock, R RV, V, industrial and racing applications. Environmentally E sealed design with 19 extended coiled cord. Magnetic c base, with protective lm, secures s in high vibration conditions in a vertical rtical or horizontal position. Power adapter for 12V outlet with separate e on/off switch. High powe power, r, true white 9-36 9-36V, V, 10W light emission. Rectangular R version with 10 LED diodes, ci circular rcular model has 6 LED diodes. diodes. Circular: Ci rcular: 4.5 dia. x 1.875 depth Rectangular: 4 x 4 x 1.75 ORDER OR DER NO. NO. 542-09017 542-09018
Mfr. Mf r. No. D Description
WATERPROOF W ATERPROOF O OVER VER 80 3X8 LOW LOW PROFILE P ROFILE TAIL LIGHT LIGHT KIT KIT
The kit comes complete with h two tail lights, two sealed amber surface s rface su mount clearance/side marker er lights with reex lens, 25 trailer wiring w harness cable with molded four f ring harharprong plug, 4 four wire car wiring ness cable with molded 4-way ay plug plus license plate bracket. ORDER OR DER NO NO. . 107-75090 114-33360 107-72750
Mfr. Mf r. No. Description
54209-017 54209-018
Circular C rcular LED Light, w/Cord, Mag Ci Magnetic n etic Base, 6 Diodes Rectangular LED Light, w/Cord, R M Magnetic Base, 10 Diodes
007509 Trailer Trailer Light Kit w/25 Wire Harness ss 403336 Lens Set Red, (2) Tail Tail Light and (2) 2) Clearance/Side Marker w/Screws 707275 4 Wiring Harness w/4-Way w/4-Way Flat Car C End
Environmentally sealed 16 gauge coiled wir wire e prevents tangling. Attractive e marine no fade yellow. 7-Way mates with OE E style 7-way blade connectors. 5-way mates ates with either a 4-way or a 5-way flat connector. ctor. ORDER OR DER NO NO. . 107-87194 107-87195 107-87196
Mfr. Mf r. No. Description
787194 5-Way, 4 ft. Cable (5-Way Flat Car & Trailer iler Ends) 787195 7-Way Trailer to 5-Way Flat Car End w/4 ft. Cable 787196 7-Way Trailer to (5-Way Flat Car End w/8 ft. Cable
403348 Bulb Capsule Permanently Sealed 403356 Bulb Capsule Replacable Bulb
1064
TRAILER ACCESSORIES
003337 7
EarClearance arance Light Red w/White Ea rMount unt Base arance Light Red w/White StudClearance unt Base Mount arance Light Amber w/White Ea rClearance Earunt Base Mount arance Light Amber w/White StudClearance unt Base Mount
203315
WATERPROOF/SEALE WATERPROOF/SEALED WA LED CLEARANCE/ CLEARANCE/ S IDE MARKER LIGHTS LIGHTS 2 1/2 R OUND SIDE ROUND W/ REFLEX LENS LENS W/REFLEX
Clearance/side marker light with gr grommet rommet designed for quick and easy y installation. Rugged ABS base that has the ac acrylic rylic reex lens sonic welded to the base. 2 1/2 dia. x 3/4, 3 1/4 dia. w/grommet, ommet, Cutout: 2 25/32 dia. ORDER OR DER NO. NO. 113-33860 113-33850
Mfr. Mf r. No. Description ription
203386 Clearance rance Light Module Red w/Reex 203385 Clearance rance Light Module Amber w/Reex x
003358 8 003357 7
WATERPROOF/SEALED W WA ATERPROOF/SEALE LED CLEARANCE/ CLEARANCE/ S IDE MARKER LIGHTS LIGHTS #30 SERIES SERIES SIDE
Clearance/side marker light with gr grommet rommet designed for quick and easy y installation. Rugged ABS base that has the ac acrylic rylic lens sonic welded t to o the base. 2 dia. x 3/4, 2 3/4 dia. w/grommet, met, Cutout: 2 5/16 dia ORDER OR DER NO. NO. 113-33810 113-33800
Mfr. Mf r. No. D Description
203381 203380
C Clearance Light Module #30 Red C Clearance Light Module #30 Amber
003211 1 003213 3
License Plate Bracket Plastic, Black B License Plate Bracket Plastic, White W
1065
TRAILER ACCESSORIES
1066
TRAILER ACCESSORIES
WESBAR LED 2 PLANOGRAM 543-11002
Mfr. No. 401565 401566 Description LED Waterproof Marker/Clearance Lamp, Stud Mount, Amber LED Waterproof Marker/Clearance Lamp, Stud Mount, Red Qty. 2 2 2 2 2 2 2 2 2 2 2 2 LED - ROW #1 - Left to Right
54201-001 LED Clearance Light Amber w/Chrome Bezel (47-106853 & 47-106020) 54201-002 LED Clearance Light Red w/Chrome Bezel (47-107047 & 47-106020) 54005 LED 6" Oval Courtesy Light Clear w/Grommet w/Pigtail 42-106858 LED Light Bar w/Red Lens LED - ROW #2- Left to Right 401580 401581 401576 401577 401578 401579 LED Waterproof Marker/Clearance Lamp, Amber LED Waterproof Marker/Clearance Lamp, Red LED Waterproof Marker/Clearance Lamp, 2" Round Grommet Mount, Amber LED Waterproof Marker/Clearance Lamp, 2" Round Grommet Mount, Red LED Waterproof Marker/Clearance Lamp, 2 1/2" Round Grommet Mount, Amber LED Waterproof Marker/Clearance Lamp, 2 1/2" Round Grommet Mount, Red LED Waterproof Stop, Turn and Tail lamp, Roadside LED Waterproof Stop, Turn and Tail lamp, Curbside LED - Wrap-Around 8-Function, Roadside LED - Wrap-Around 7-Function. Curbside LED 6" Oval Tail Light Red w/Grommet w/Pigtail LED 6" Oval Tail Light Red w/Chrome Trim Snap Ring LED Waterproof STL-80 Stop, Turn, and Tail Lamp, Roadside LED Waterproof STL-80 Stop, Turn, and Tail Lamp, Curbside LED Waterproof ID Light Bar LED Waterproof Low Prole Trailer Light Kit LED Waterproof STL-80 Trailer Light Kit LED Submersible Under 80" Trailer Light Kit
LED - ROW #3 - Left to Right 407535 407530 281595 281594 54006 54004 407555 407550 401567 407540 407560 287512
ELECTRICAL - ROW #2
ELECTRICAL - ROW #3
ELECTRICAL - ROW #4
ELECTRICAL - ROW #5
NOTE: Tail Lights, Clearance/Side Marker Lights and ID Light Bars approved for trailer accessory and towing application use.
1067
TRAILER ACCESSORIES
LONG LASTING MARINE LIGHTING from
Operates 9 -16 Volts DC Systems Single LED Configuration Tail Light Includes Single LED Sidemarker Rated @ 100,000 Hours of Service Life Sonically Sealed Polycarbonate Lens and Housing Energy Draw 350 Milliamps Impact Resistant Kit Includes: Two Tail Lights 25 Ft. Wiring Harness 4 Ft. Truck Harness License Plate Holder Mounting Hardware
ORDER NO. 289-44007
Operates 9-16 Volt DC Systems Rated @ 100,000 Hours of Service Life Sealed Polycarbonate Lens and Housing Shock and Vibration Proof No Corrosion Submersible Tail Lights 9 LED Configuration Left-Hand Light has LED License Plate Illumination Energy Draw 350 m Size: 7.75L X 3.75W X 2.75D
ORDER NO. 283-44827 287-44827
Description Tail Light Kit, Red, Fits under 80 Application Tail Light Kit, Red, Fits over 80 Application
Operates 9-16 Volt DC Systems Rated @ 100,000 Hours of Service Life 9 LED Configuration Sealed Polycarbonate Lens and Housing Energy Draw 350 Milliamps Shock and Vibration Proof No Corrosion Submersible 6 Function
ORDER NO. 281-44007 285-44007
Description Tail Light - RH, Fits under 80 Application Tail Light - RH, Fits over 80 Application
Only Left Hand Side with License Plate Illuminator Operates 9-16 Volt DC Systems Rated @ 100,000 Hours of Service Life Fits Over 80" Applications 7 Function, 9 LED Configuration Sealed Polycarbonate Lens And Housing Energy Draw 350 Milliamps Shock and Vibration Proof No Corrosion Submersible
ORDER NO. 282-44007 286-44007
Description Tail Light - LH, Fits under 80 Application Tail Light - LH, Fits over 80 Application
1068
TRAILER ACCESSORIES
LED MINI SIDEMARKER / CLEARANCE INCLUDES CHROME TRIM RING & GROMMET
Single LED Configuration Rated @ 100,000 Hours of Service Life Sealed Polycarbonate Lens and Housing Shock and Vibration Proof P2 P3 Rated Housing Energy Draw 50 Milliamps Standard Industry Connector Requires 2-Pin Plug Connector (Not included)
ORDER NO.
203-11827 203-44827
Colour Amber
BUNK LIGHT
Operates 9-16 Volt DC Systems Rated @ 50,000 Hours of Service Life Built in On/Off Rocker Switch For Interior use only ORDER NO. Rotating Head 718-40007 4 LEDs Dimensions: 6.87 L x 1.21 W x 1.20 D
718-41007 718-50007 718-51007
Colour LED Red, Black Casing LED Red, White Casing LED White , Black Casing LED White , White Casing
1069
TRAILER ACCESSORIES
OVAL 6" LED - STOP, TAIL & TURN LIGHT - GROMMET MOUNT
10 LED Configuration 100,000 Hours of Service Life Sonically Sealed Polycarbonate Light Bar Energy Draw 250 Milliamps Mounted Vertical, Horizontal, or 45 Degrees Impact Resistant Includes Grommet Rubber
ORDER NO. 260-44007
Colour Red
Colour Red
1070
TRAILER ACCESSORIES
LICENSE PLATE BRACKET
Injection Molded Nylon Replace that broken license plate bracket with a new one. Fits most standard tail lights. Fasteners needed depending on the application. ORDER NO. 427-53250 Mfr. No. 753250 A 8 B 1 C 2-11/16 D 13/16 E 5-9/16
Locks the outboard motor in forward position while trailering, greatly reducing the effects of road shock Does not "tie" engine's lower-unit to trailer, eliminating excessive pressure on hydraulic seals and unsightly scuff marks Small compact mount can be easily stored in just about any boat compartment Constructed of black powder-coated steel with stainless steel pins
017-10107
Description Fits: Mercury engines 200 - 250 HP Optimax/Optimax ProXS and the 150 - 200 HP EFI Engines* Fits: Mercury engines 135 - 175 Optimax/Optimax ProXS and the 150 - 200 HP EFI Engines. Should also fit the 75 - 115 HP 4-Engines** Fits: OMC, Bombardier 1989 to present, 100HP and up
017-10309
10108 10309
*Note that this may not fit well on some of these engines because of their 4.65" span on the bracket may be too wide, depending on the position of the mount nut. **This will not fit 1.5L Family - the lower mount bolt centerline span is 3.44" and will not fit with their 3.25" span.
1071
TRAILER ACCESSORIES
107-72750
107-71030
VEHICLE/TRAILER ADAPTERS
Adapters for a quick switch from one style plug to another when towing multiple trailers. ORDER NO. 107-76794 107-72570 107-72500
Mfr. No. Description
4-Way Flat 4 Ft. Car End, 18 Ground 4-Way Flat 18 Trailer End, Wunside Harness, 18 Ground 4-Way Flat 18 Trailer End, Wishbone Harness, 18 Ground w/4 Ft. Car End, 18 Ground 4-Way Flat 25 Ft. Trailer End, Wishbone Harness Kit w/Hardware, 3 Ft. Ground w/4 Ft. Car End, 18 Ground
7-Way Blade to 5-Way Flat 7-Way Blade to 5-Way Flat, 6 Wire 7-Way Blade to 5-Way Flat, 18 Wire 107-71030 707103
707273 707105
5-Way Flat 6 Ft. Car End, 6 Ft. Ground, 6 Ft. Auxiliary 5-Way Flat 25 Ft. Trailer End, Wishbone Harness Kit w/Hardware, 4 Ft. Ground, 5 Ft. Auxiliary w/6 Ft. Car End, 6 Ft. Ground, 6 Ft. Auxiliary
1072
TRAILER ACCESSORIES
25', 18/2 Bonded 4-Wire Ready-Wired #B1025D0 (Wires Bonded for each Trailer Side)
CARSIDE CONNECTOR
051-10040 051-10230
1073
TRAILER ACCESSORIES
ORDER NO. Description B.C. Dia. No. of Pilot Max. Load Load Range/ Holes Dia. Capacity Wt. lbs. Rim / Type
055-447041 480-12 Tire on 12" x 4" Rim 055-457151 480-12 Tire on 12" x 4" Rim 055-446841 480-12 Tire on 12" x 4" Rim 060-47027 060-47026 530-12 Tire on 12" x 4" Rim 530-12 Tire on 12" x 4" Rim
055-424281 530-12 Tire on 12" x 4" Rim 055-424271 530-12 Tire on 12" x 4" Rim 055-450311 530-12 Tire on 12" x 4" Rim 055-19158 055-19159 ST 175/80D13 Tire on Rim ST 175/80D13 Tire on Rim 055-342351 ST 175/80D13 Tire on Rim 055-448391 ST 175/80D13 Tire on Rim 055-19312 ST 205/75D14 Tire on Rim 055-341511 ST 205/75D14 Tire on Rim 055-448401 ST 205/75D14 Tire on Rim 055-19401 ST 205/75D15 Tire on Rim 055-343901 ST 225/75D15 Tire on Rim 055-342081 ST 225/75D15 Tire on Rim 055-456841 ST 225/75D15 Tire on Rim 055-19801 ST 175/80R13 Tire on Rim
WHITE
GALVANIZED
055-418181 ST 175/80R13 Tire on Rim 055-456811 ST 175/80R13 Tire on Rim 055-470791 ST 185/80R13 Tire on Rim 055-19800 ST 205/75R14 Tire on Rim 055-418191 ST 205/75R14 Tire on Rim 055-457001 ST 205/75R14 Tire on Rim 055-19802 055-19803 055-19804 ST 215/75R14 Tire on Rim ST 205/75R15 Tire on Rim ST 225/75R15 Tire on Rim
RADIAL TIRES
Description ST175/80R 13 Tire ST205/75R 14 Tire ST215/75R 14 Tire ST205/75R 15 Tire ST225/75R 15 Tire Cap (lbs.) 1360 1760 1870 1820 2150 Load Range C C C C C
ORDER NO. 065-19801 065-19800 065-19802 065-19803 065-19804
1074
TRAILER ACCESSORIES
1075
317-08893
Length
14"- 43"
317-14254 F14254
317-17632
The BoatBuckle Pro Series gunwale tie-downs feature our new Sur-Grip Kwik-Lok buckle for maximum comfort. Built -in closure stores excess web while trailering Vinyl coated S-hooks with keeper and 5,500 Ibs. polyester webbing
ORDER NO. Mfr. No. 317-17635 F17635 317-17637 F17637
Description Pro-Series Kwik-Lok Gunwale Pro-Series Kwik-Lok Gunwale Dim. 2 x 13 2 x 20 Rated Cap. 1,200 Ibs./ea 1,200 Ibs./ea
317-13116 F13116
1076
Adjusts To 24"
Description Deck Mount Rod Hold-Down PLUS Vertical Rod Hold-Down PLUS
WINCH STRAPS
WINCH STRAP WITH LATCH-LOK TECHNOLOGY
Innovative latch technology allows you to simply push on and squeeze off 5,500 Ibs. polyester webbing with loop end
ORDER NO. Mfr. No.
Description
Dim.
Rated Cap.
317-17741 F17741
Dim.
Rated Cap.
Description
Dim.
1077
TRAILER ACCESSORIES
MARINE CA CAMBUCKLE MBUCKLE TIE DOWNS
Bow Cambuckles s Vinyl coated S-hooks protect b boats oats nish s Provides super p strong g holding gp power s Some models available with stainless ainless steel housing Transom T ransom Cambuckles s Locks in place to eliminate slippage page s Protective housing prevents scratches cratches s Some models available with stainless ainless steel housing
206-01660 206-00660
Mfr. Mf r. No. N
Description D i tion
2060166 2060066
Cambuckle T C ie Down w/Hooks - (Bow) ow) 1 x 36, Stainless Steel, Black Tie Cambuckle T C ie Down w/Hooks - (Bow) ow) 1" x 36", Zinc, Black Tie
Light Standard
300 400
ORDER OR DER NO NO. . 206-02660 206-03660 206-04660 206-05660 206-06660 206-08660 206-09660 206-10660 206-11660 206-12660 206-13660 206-14660 206-15660
Mfr. Mf r. No.
Description D
Duty Rating
2060266 2060366 2060466 2060566 2060666 2060866 2060966 2061066 2061166 2061266 2061366 2061466 2061566
R Retractable T Tie ie Down - ( (Transom) Transom) 2" 2 x 43", Stainless Steel, Black R Retractable T Tie ie Down - ( (Transom) Transom) 2" 2 x 43", Zinc, Black S Surelok Cambuckle T Tie ie Down - ( (Transom) Transom) nsom) 2 x 24, Zinc, Black S Surelok Cambuckle T Tie ie Down - ( (Transom) Transom) nsom) 2 x 24, Stainless Steel, Black ack S Surelok Cambuckle T Tie ie Down - ( (Transom) Transom) nsom) 2 x 48, Stainless Steel, Black ack 10', Max Grip Ratchet - (Gunwale) 2" x 1 M 0', Stainless Steel, Black 13', Max Grip Ratchet - (Gunwale) 2" x 1 M 3', Stainless Steel, Black M Grip Ratchet - (Gunwale) 2" x 16', Max 16', Stainless Steel, Black Max M Grip Ratchet - (Gunwale) 2" x 20', 2 Stainless Steel, Black Max M Grip Ratchet - (Gunwale) 2" x 10', 10', Zinc, Black Max M Grip Ratchet - (Gunwale) 2" x 13', 13', Zinc, Black M Grip Ratchet - (Gunwale) 2" x 16', 16', Zinc, Black Max M Grip Ratchet - (Gunwale) 2" x 20', 2 Zinc, Black Max
Standard Heavy Duty Heavy Duty Light Light Light Standard Standard Standard Heavy Duty Heavy Duty Heavy Duty Heavy Duty
600 833 833 333 333 333 400 400 400 833 833 833 833
1800 18 800 2500 25 500 2500 25 500 1000 10 000 1000 10 000 1000 10 000 1200 12 200 1200 12 200 1200 200 2500 500 2500 500 500 2500 500 2500
1078
TRAILER ACCESSORIES
EXTEND-A-REACH MOTOR SUPPORT
Secures motor to trailer crossbar Includes all parts for easy installation Removes easily for quick loading and unloading Adjusts from 26" to 56" Corrosion resistant E-Coat finish ORDER NO. 178-02500 Mfr. No. 1780250
178-02260
Replacement Parts
210-00740
178-02400
178-02420
Roller Bracket
Bolt On
Mfr. No SP-4000-ADJ-RB
Length 23"-35"
Mfr. No 460-ADJ
935-52100
935-51900
REPLACEMENT V-BLOCK
ORDER NO. 935-55805
1079
TRAILER ACCESSORIES
L IA C R E SP RDE O
075-63600 206-63216KA 206-63218KA 206-63220KA 206-63250
63249
Combo Lock Set, Bent Pin/Brass Coupler, for 1-1/4" & 2" Square Receivers Combo Lock Set, Dogbone Receiver/ Coupler, for 1-1/4" & 2" Square Receivers
206-63216KA 63216KA KEYED ALIKE 1/2" Receiver Lock for Class II Receiver Hitches 206-63217KA 63217KA KEYED ALIKE 5/8" Receiver Lock for Class III & IV Receiver Hitches 206-63218KA 63218KA KEYED ALIKE Class II 1/2" Receiver Lock and 1/2" Span Style Coupler Lock 206-63220KA 63220KA KEYED ALIKE 1/2" Span Style Coupler Lock 206-63221KA 63221KA KEYED ALIKE 2" Span Style Coupler Lock with 1/4" Pin 206-63222KA 63222KA KEYED ALIKE 2-1/2" Span Style Coupler Lock with 1/4" Pin
206-63250
63250
075-00101
075-00600
075-00100
206-63227
TRAILER LOCKS
ORDER NO. 075-00101 075-00600 075-00100 206-63227 206-63228
Mfr. No. Description
Coupler Lock Brass Coupler Lock Universal Coupler Lock Coupler Lock for 2-5/16" Ball Coupler Lock for 2" Ball
206-63234
206-63234 63234* Dogbone Lock w/Sleeve for 1-1/4", 2" & 2-1/2 Square Receivers, 1/2 & 5/8 Dia. 206-63248 206-63224 206-63223 206-63252 206-63253 63248 63224 63223 63252 63253 Bent Pin Lock w/Extra Pin for 1-1/4" & 2" Square Receivers, 1/2 & 5/8 Dia. Bent Pin Lock for 1-1/4 Square Receivers, 1/2 Dia. Bent Pin Lock for 2 & 2-1/2 Square Receivers, 5/8 Dia. Dogbone Lock for 2-1/2 Square Receivers, 3-1/2" Span, Class V, 5/8 Dia. Bent Pin Lock for 2-1/2 Square Receivers, 3-1/2" Span, Class V, 5/8 Dia.
63240 63242
Packaged Class III/IV Pin & Clip, 5/8, groove style Packaged Class III/IV Pin & Clip, 5/8, hole style
1080
PADLOCKS/COUPLER LOCKS
A 1/4" 5/16"
B 3" 3"
C 1-13/16" 2"
D 7/16" 5/8"
E 13/16" 7/8"
C 3/4"
D 9/16"
ECONOMY PADLOCKS
Brass ORDER NO. 051-49600 051-49620 Size 1" 1-3/4"
1081
COUPLER LOCKS
RECEIVER PIN AND CLIPS
Hardened steel for improved cut and shear resistance Tapered ends for easy insertion
227-03700
Description Class II Hitch Pin & Clip, 1/2" Pin Class III/IV Hitch Pin & Clip 5/8" Pin
COUPLER LOCKS
Adjusts to fit many makes and models 377DAT is chrome plated, zinc die-cast lock body K1 key blank ORDER NO. 227-03770 227-03790 Masterlock No. 377DAT 379DAT
227-03770
Description 1-7/8" & 2" Universal Coupler Lock 1-7/8", 2" & 2-5/16" Universal Coupler Lock
227-03790
103-00370
227-28470
2847DAT
Adjustable stainless steel fits 5/8", 1", and 2" wide couplers
37DAT
Armored hardened steel shackle defies cutting 4-pin tumbler cylinder helps prevent picking Shackle guard protects against bolt cutters and hacksaws Ideal for securing trailers, cables, and chains
Description 40 mm Armored Coupler Latch Lock Stainless Steel Adjustable Coupler Latch Lock
1082
TRAILER ACCESSORIES
075-21382
075-21383
075-21384
075-10200
075-20210
Length
Rise
Drop
1 1 1
3 5 7
4 6 8
TL1020 TL2021
18 ToyLok Cable Lock (Mount Not Included) ToyLok, 15 Cable Lock with padlock
075-63880
075-63884
075-63887
075-63894
CABLE LOCK
Cable locks secure items to the vehicle. Attractive point-of-purchase display packaging. ORDER NO. 206-63233
Mfr. No. Description
075-63880 63880 1-7/8 075-63884 63884 1-7/8 075-63887 63887 075-63891 63891 2 2
3/4 1 3/4 1 1
1-1/2 3/8-5/8 2,000 2-1/8 3/8-3/4 2,000 1-1/2 3/8-5/8 3,500 2-1/8 3/8-3/4 6,000 2-1/8 3/8-3/4 6,000
63233
075-21342
075-21345
Length
Rise
Drop
80425
1 1
8-12 11
3/4 2-3/4
2 4
8 8 6-3/4
1-7/8 2 2-5/16
1083
TRAILER ACCESSORIES
STRAIGHT TONGUE STAMPED FAS-LOK COUPLERS
The most popular coupler mechanism ever developed, the Fas-Lok originated as a Fulton brand and is offered in a full line of SAE Class I through IV rated straight tongue stamped couplers. The Fas-Lok latching mechanism allows quick and easy trailer hook-up, and is factory adjusted for convenience.
Mfr. No.
Ball Size
SAE Class
Description
Finish
11200 0101 11250 0101 11300 0101 22250 0101 22300 0101 CH 0701
I I I II II NA
2" Wide Channel, Clear Zinc Finish, Labeled 2 -1/2" Wide Channel, Primed Finish, No Product Label 3" Wide Channel, Clear Zinc Finish, Labeled 2-1/2" Wide Channel, Labeled 3" Wide Channel, Labeled Handi-Grip Coupler Handle
100 Hr. Z-Max 600 100 Hr. Z-Max 600 Z-Max 600 NA
FOLD-AWAY COUPLERS
Ideal for boat trailers that can be just a little too long to t inside smaller garages. Replace existing couplers on trailers with 3500 lb. & 5000 lb. weight capacities. Shortens trailer tongue by 34. Unique patented offset design. Meets SAE J684 requirements. Easy to install bolt-on application with complete instruction manual. Z-Max 600-hour zinc plating. Includes all mounting hardware. Limited 5-year warranty.
Space Saving!
ORDER NO.
Mfr. No.
Ball Size
SAE Class
Pivot Length
Description
Finish
II II III
34" Coupler Kit, 3" x 3" Trailer Tongues, Bolt On 34" Coupler Kit, 3" x 4" Trailer Tongues, Bolt On 34" Coupler Kit, 3" x 4" Trailer Tongues, Bolt On
Includes Fold-Away hinges, mounting hardware, pivot bolt, pivot pin/clip, extension tube and coupler. Chains and torques bit included with retail display box packaged items.
ORDER NO.
Mfr. No.
Ball Size
SAE Class
Pivot Length
Description
Finish
Up To 5,000 Up To 7,500
N/A N/A
N/A N/A
Up to 48" Up to 48"
Bolt-On Hinge Kit, 3" x 3" Trailer Tongues Bolt-On Hinge Kit, 3" x 4" Trailer Tongues
Includes Fold-Away hinges, mounting hardware, pivot bolt, pivot pin/clip. Torques bit included with retail display box packaged items.
1084
TRAILER ACCESSORIES
QUICK-LOCK COUPLERS
D-L couplers are die formed. They are easily and quickly unlocked by a trigger action release on the safety lever.
D-L Quick-Lock Couplers ORDER NO. Mfr. No. SAE Class 109-09600 13628 1 109-09700 13728 1 109-09800 13885 2
Ball Housing Width Size (Inside) 1-7/8" 2-1/2" 1-7/8" 3" 2" 3"
13968 13970
SAFETY CHAIN
No. 6255 - SAE Class 1 2000 lb. test 2 - 18" chains, welded link construction. Bright zinc plated finish. Accepts 3/8" mounting bolt. Heat-treated steel hook. Complies with regulation V-5. Packaged in polybag.
ORDER NO. 106-62550
A 44-1/2"
B 13/16"
1085
TRAILER ACCESSORIES
FULTON F2 MARINE AND RECREATIONAL JACKS
Fulton, the industry leader for high performance marine jacks, is proud to introduce a revolution in trailer jack engineering. The F2, designed for use with marine, recreational and utility trailers, continues the Fulton heritage of innovation rethinking every feature and challenging industry conventions. The result is a reengineered high quality product that will transform the industry. Its so strong and reliable that Fulton is backing it with an unprecedented LIMITED LIFETIME WARRANTY. s Maintenance free - designed to eliminate the need for lubrication and maintenance s Corrosion resistant coatings cover internal and external components - will hold up in harsh environments s Ergonomic design - crank, release pin and integrated wheel wedge are made of strong, engineered plastic for a comfortable touch s Stylish design - compliment your boat and customize your trailers styling s Sealed and lubricated one-piece gearbox s Twin track and wide track versions available s Available in bolt-on and weld-on versions for up to 5 tongues s Handle Hold-Up secures handle to jack tube when in stowed position s Limited Lifetime Warranty
141-30201
Lift Screw Capacity Handle Style Travel (lbs.)
141-30401
ORDER NO.
Mfr. No.
Mount Travel
10" 10"
8" 8"
9/16" 9/16"
Twin Track - Includes Handle Hold-Up & Wheel Wedge Features, & Bolt-On Mounting Hardware for 3x3 & 3x4 Frames. Wide Track - Includes Handle Hold-Up & Wheel Wedge Features, & Bolt-On Mounting Hardware for 3x3 & 3x4 Frames.
C
Travel and Clearance Diagram A= Retracted B= Extended C= Clearance Height
A/B
10"
13.0"
23.0"
11.0"
6" Wheel, Clear Zinc Finish, Bolt-on, Fits up to 3"x5" Trailer Frame
1086
TRAILER ACCESSORIES
FULTON MARINE AND RECREATIONAL JACKS
Designed for use with marine and utility trailers, Fulton brand tongue jacks are time- tested and application-proven. Include all necessary mounting hardware. The Fulton brand bolt-thru swivel mounts (U.S. PAT. 6,302,381) use 3-D formed heavy-gauge steel stampings and a proprietary bushing material for a mount with minimal deection and maximum support. All mounts t up to a 3 x 5 trailer frame. s Strong proprietary bushing materials s Stable formed heavy-gauge steel construction s Dependable design
600 hour salt spray rating per ASTM B117
A/B
610-01010
615-01010
715-01010
610-12000
625-01010
XP10 0101
1,200 Sidewind
10"
12.5"
22.5"
10.5"
6" Diameter Wheel, Bolt-On, Mounting Hardware for up to 5" Frame Included, Handle & Wheel Unassembled 8" Diameter Spoked Wheel, Bolt-On, Mounting Hardware for up to 5" Frame Included, Handle & Wheel Unassembled Dual Wheel, Additional 2" of Travel, 6" Diameter Wheels, Bolt-On, Mounting Hardware for up to 5" Frame Included, Handle & Wheel Unassembled
Z-Max 600 1/2" Clear Zinc Z-Max 600 1/2" Clear Zinc Z-Max 600 1/2" Clear Zinc
615-01010
XP15 0101
1,500 Sidewind
10"
13.0"
23.0"
12.4"
715-01010
XPD15L0101
1,500 Sidewind
12"
13.1"
25.1"
12.4"
141-50149 1410050149
400
N/A
N/A
14.5"
N/A
4.5"
Swiveling Trailer Stand, 6" Diameter Wheel, Bolt-On, Mounting Hardware for up to 5" Frame Included, Wheel Unassembled 6" Diameter Wheel, Bolt-On, Mounting Hardware for up to 5" Frame Included, Handle & Wheel Unassembled
3/8"
10"
12.7"
22.7"
11.4"
28"
7.00"
35.5"
19.25" Heavy Duty Square, Drop Leg Jack, 3.8" x 7.5" Z-Max 600 Footplate, Bolt-On, Mounting Hardware for up Clear Zinc to 5" Frame Included, Handle Unassembled, Travel Includes Drop Leg
1087
TRAILER ACCESSORIES
PARTS - MARINE AND RECREATIONAL JACKS
WHEELS
ORDER NO.
Mfr. No. Description
HANDLE KIT
ORDER NO. 179-33301 0933301S00 Includes (1) Handle Assembly with Plastic Handle Roller, (1) Groove Pin, & (1) Flanged Bushing XP10/L/W/WC, XP100 0933305S00 Includes (1) Handle Assembly with Plastic Handle Roller, (1) Groove Pin, & (1) Flanged Bushing XP15/L/W/WC, XP15L, HD2500
179-33305
075-58192
075-58193
179-33306 0933306S00 Includes (2) Gears, (1) Groove Pin, (1) Pin, (1) Washer, (1) Spacer, & (2) Flanged Bushings TJ1222, XP15/L/W/WC, XPF15L, HD2500
179-33307 0933307S00 Includes (1) Plunger Pin, (1) Plunger Pin Cap, (1) Washer, (1) Cotter Pin, & (1) Spring XP15/L/W/WC, XPF15L XP10 (all 1,200 lb. capacity)
6811S00
SNAP RING
ORDER NO. 077-09086
Mfr. No. Description
P9086-00
All models
1088
TRAILER ACCESSORIES
HEAVY DUTY SPARE TIRE CARRIER
Strong one-piece construction Hot-dipped galvanized spare tire carrier mounts securely on frame or tongue. One-piece construction for extra strength to withstand vibration. Holds 4 or 5 lug wheels and adjusts for frames up to 3" wide by 4" high. Tire mounting hole centers 4-9/64". Made of 7 ga. steel. Side offset is 4-1/2" from frame with 5" rise for ground clearance. All mounting hardware is included. Packed in display box.
ORDER NO. 336-27310
6400
6460
6400A, 6460 can be adapted for rounded tongue mounting by welding two plates to the pipe as shown
1089
TRAILER ACCESSORIES
SIDE MOUNT TIRE CARRIER
Adjustable bolt circle fits both 4 lug and 5 lug wheels. Fits all trailer tongues up to 3" wide by 4" high. Extra heavy duty welded steel construction. ORDER NO. 404-86098 Mfr. No. 86098 Description Galvanized
HITCH CABLES
Replace your noisy chains with self-coiling hitch cables. Black Vinyl Jacketed with Safety Latch Hook Durable galvanized aircraft cable construction 36" long cables with S-hooks Exceed SAE J684 standards ORDER NO. 404-59548 Mfr. No. 59548 Description Hitch Cable, Class 4, 7000 Ib. Load Rating
WINCH CABLES
Galvanized steel 7 x 19 aircraft cable is made to handle the new heavy loads. Each cable is fitted with a heavy duty galvanized latch hook, pull proof loop and fastener end for replacement use on POWER WINCH, DL, SUPER WINCH and other quality power winches. Also great for hand crank winches. ORDER NO. 404-59378 404-59379 404-59380 404-59385 404-59390 404-59395 404-59400 Description 5/32" x 25' - 2800 # 3/16" x 20' - 4200 # 1/8" x 20' - 2000 # 3/16" x 25' - 4200 # 3/16" x 50' - 4200 # 7/32" x 25' - 5600 # 7/32" x 50' - 5600 #
WINCH HOOKS
Replace your worn out hook with a new zinc plated forged latch hook from Tie Down. 1/package. ORDER NO. 404-50640 404-50641 404-50645 Capacity 7000 lb 12000 lb 7500 lb
SAFETY CABLES
Self-coiling zinc cables reduces the chance of dragging Clear vinyl coating protects from scratching 5000 lbs. pull strength ORDER NO. 227-28290 227-28300 Mfr. No. 2829DATSC 2830DATSC Description 40" long, 5000 lbs capacity, 2 pack 40" long, 5000 lbs capacity, single
1090
TRAILER ACCESSORIES
F2 SINGLE SPEED TRAILER WINCH
Fulton continues to expand the F2 series of products with the introduction of the 1600 lb. F2 Single Speed Trailer Winch. Enclosed frame for performance and style, this 1600 lb. winch is user-friendly, sleek and reliable. Attractive design is styled to compliment the F2 jack series for a custom look. s Compact design s Enclosed frame design for a sleek, strong stylish look s Two piece corrosion resistant aluminum frame s One piece corrosion resistant aluminum handle s Dual gear drum operates smoothly s Handle is easily adjustable - 6 to 7 s Handle switches from left to right hand drive s Soft ergonomic grip s Features E.I.S. - Easy Install System s Strap and mounting hardware included in Display Box packaged product s CE Compliant s Limited Lifetime Warranty
175-20101
F2 TRAILER WINCHES
ORDER NO. 175-16101 175-20101 175-32101
Mfr. No. Capacity (lbs.) Speed(s) Handle Length Strap Finish
4.1:1 5.1:1
20'
9.25
PREMIUM FINISH
6.7 15.7
5.1:1, 4 Position 6", 20 x 2" Heavy 3.17:1 7", 8", 9" Duty w/Hook
s Environmentally friendly s Self-healing s Maximum corrosion resistance s Used in salt water environments and other demanding climate applications s 1200 hour salt spray rating per ASTM B117
1091
TRAILER ACCESSORIES
SINGLE SPEED TRAILER WINCHES
Fulton winches feature efcient gear ratios, full-length drum bearings, oil-impregnated shaft bushings, and our Comfort Grip handle for ease of cranking. All gears are high-carbon steel for superb strength and long-term durability. Stamped carbon steel frames provide rigidity for gear alignment and longer cycle life. Zinc nishes provide excellent corrosion resistance in all environments. All models are designed for use with rope or strap. XLT Series includes stylized polypropylene shell with strap and hook as standard features. The T1300 and T1500 models offer optional gear covers, gear train protection, and added styling.
Compliant
175-06000
175-09030
Mfr. No. Capacity (lbs.)
175-11000
Gear Ratio Handle Length
175-13000
176-14000
Drum Storage (Rope)
175-15000
Drum Storage (Strap)
175-18010
Replace Handle
T600 0101 T903Z 0101* T1100 0101 T1300 0101 XLT14ZB101 T1500 0101 T1801 0101
1/4" x 2-1/2" Grade 5 1/4" x 2-1/2" Grade 5 1/4 x 2-1/2 Grade 1/4" x 2-1/2" Grade 5 5/16" x 2-1/2" Grade 5 1/4" x 2-1/2" Grade 5 3/8" x 2-3/4" Grade 5
CE All Cequent Performance Products single speed trailer winches are CE compliant. * For Personal Watercraft, **Maximum Mechanical Advance - Based on rst layer of recommended line on the drum. For maximum efciency, use only the amount of line required.
Compliant
175-26050
175-26051
Replace Handle
Max.
175-26051 T2605B0101
CE All Cequent Performance Products two speed trailer winches are CE compliant. *** Brake Kit 1619-01 available as option not furnished. Only winches that are shown to accommodate steel cable should be used with steel cable. Cable keeper kits are included with the winches specifying steel cable. Winches rated for steel cable have a larger drum hub to reduce or lessen chance of kinking or fraying. Notes: 1. Winch mounting hardware sold separately. Refer to instruction sheet for recommended bolt size and grade. 2. Fulton brand two-speed winches are designed for boat trailer and other pulling applications, which require the freewheeling feature of ratchet type winches. If moving loads requiring vertical lifting, or positive load control in both directions, choose a Fulton brake winch. 3. All Fulton brand winches are rated on the rst layer of recommended rope, strap, or cable. The winch load capacity must be derated as additional layers are used. Derate the capacity 10% per additional layer of rope, strap, or cable. 4. Fulton brand winches are NOT designed to be human hoists and should never be operated when there are persons on, around, or under the load being moved.
1092
TRAILER ACCESSORIES
WINCH ACCESSORIES
ORDER NO. 175-20700
CLAMSHELL
Mfr. No.
Description
SAFETY CHAIN
1/4 x 36 chain. 1/4 chain interior dimension is sized so a 1/2bolt shank can pass through. Grade - 70. 1/4 Forged Clevis Hook. Yellow zinc nish. 12,600 lbs. capacity. Conform to J684.6.3.4 SAE standards. ORDER NO. 175-20324
Mfr. No. Description
WS20 0700
Winch Strap and Hook - Nylon web winch strap with hook, 2" x 20, 2,600 lb. maximum working load
175-20200
COUNTER DISPLAY
WS20DP0200 Winch Strap and Hook - Nylon web winch strap with hook, 2" x 20, 2,600 lb. maximum working load WSP12 0100 Personal Watercraft Winch Strap with Hook and Loop - includes loop Nylon web winch strap with hook, 2" x 12, 1,800 lb. maximum working load
120-01010
CLAM
175-20600
CLAM
WS20HD0600 Heavy Duty Winch Strap and Hook - 2" x 20, 10,000 lb. minimum breaking strength, 4,000 lb. maximum working load
175-33301 0133301S00 Service Kit, Ratchet Repair - XLT14 175-33302 0133302S00 Service Kit, Pinion Shaft - XLT14 175-33303 0133303S01 Service Kit, Pinion Shaft - T1602, T1801 175-33306 0133306S01 Service Kit, Ratchet Repair - T1100, T1300, T1500 175-01514 1514S01 Service Kit, One Way Ratchet Repair - T600, T600L, T900 - Models Pre-2007 Service Kit, Ratchet Repair, 2-Speed - T2005, T2605(B), T2625, T3205 Service Kit, Ratchet Repair - T1602, T1801, T903Z, P1200 Service Kit, Input Shaft/Bearing T2005, T2605(B), T2625, T3205 Service Kit, 2-Speed Brake Service Kit, Ratchet Repair - T2000, T2500, T3700 Service Kit, Cable Keeper - K/ KX1051, K/KX1550, KX1575, K2550 Winch Handle, 6" Offset Packaged Winch Handle, 8" Offset Packaged Winch Handle, 7" Offset Packaged Winch Handle, 10" Offset Packaged Winch Handle, 10" Dogleg Packaged
37-2125 Display Stand Marine Jacks, Includes(3) Jack Display Adapters, (1) Fold-Away Coupler
175-01562 1562S00 175-01598 1598S01 175-01609 1609S01 175-01619 1619-01 175-04197 4197S00 175-05621 5621P01 175-05868 5868P01 175-06302 6302P01 175-06312 6312P01 175-06817 6817P01 175-09235 9235P01
1093
WINCHES
MODEL
ORDER NO. RATED CAPACITY* MIN. OPERATING LOAD REQUIRED DRUM HUB DIAMETER GEAR RATIO HANDLE LENGTH MAXIMUM MECHANICAL ADVANTAGE CABLE SIZE & LENGTH
B1200B
097-12000 Mfr. No. 10752
B1500
097-15000 Mfr. No. 10768
B2500
097-25000 Mfr. No. 10784
1500 lbs. 150 lbs 1-1/8" 6:1 12-1/4" 106.9 1/4" X 52'
2500 lbs. 300 lbs 1-5/16" 12:1 12-1/4" 180.9 5/16" X 51'
BRAKE WINCHES
Special Features: Built-in self-activating friction brake that locks winch in position when handle is released. All welded and copper brazed construction for greater strength. Made in U.S.A. Hardened gears throughout on all models. Three models - B1200, B1500, and B2500 offer single, double, and triple reduction gearing. Meets ASAE safety standard S-361T. Standard finish is powder coated metallic copper bronze. B series winches are not strap adaptable. NOT FOR MOVEMENT OF HUMAN BEINGS
*Capacity based on direct line pull on third layer of line on drum. Capacity is reduced as line builds up on drum.
PULLING WINCHES
D-L winches are engineered to offer many distinct advantages. Zinc Plated Tuff Plate Finish Reinforced arc-welded reels. Embossed, reinforced bases, high carbon steel gears throughout. Load matched gear ratios for easier cranking. Hunting tooth gear system for more even wear and longer life. Permanently lubricated bearings on all drive shafts. DL1100A DL1300A Meets SAE Standard J1853 Mfr. No. 15103 Mfr. No. 14362 DL900A Made in U.S.A. Mfr. No. 15002
D-L brake winches are built for multipurpose hauling and lifting operations. They are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people could be present.
DL1402A
Mfr. No. 15303
DL1602A
Mfr. No. 14527
DL1802A
Mfr. No. 14627
DL2500A
Mfr. No. 14825
DL2500B
Mfr. No. 14830
MODEL
DL 900A DL 1100A DL 1300A DL 1402A
Rated Capacity (2) 900 lb./408kg 1100 lb./499kg 1300 lb./590kg 1400 lb./635kg 1600 lb./726kg 1800 lb./817kg 2500 lb./1134kg
Drum Hub Dia. 5/8" 7/8" 7/8" 7/8" 1-1/8" 1-1/8" 1-1/8" 1-5/16"
Gear Ratio 3.2:1 3.7:1 4.4:1 4.4:1 5.4:1 5.4:1 17.3:1/5.4:1 12:1 / 6:1
Handle Length 7" 7" 7" 9-1/2" 9-1/2" 9-1/2" 9-1/2" 9-1/2"
Reversible Ratchet
2-Speed Operation
Maximum Drum Capacity Cable (3) Strap 3/16" x 40' 3/16" x 79' 7/32" x 56' 1/4" x 40' 1/4" x 58' 9/32" x 58' 5/16" x 47' 16' 29' 31' 31' 45' 38' 38'
ORDER NO. 220-09000 220-11000 220-13000 220-14020 220-16020 220-18020 220-25000 220-25001
Standard Duty
Medium Duty
Heavy Duty
3/8" x 37'
220-35001
(1) Hand brake standard equipment. (2) Capacity based on direct line pull on the third layer of line on the drum. Capacity is reduced as the line builds up on the drum. (3) Drum capacity based on cable size listed. (Cable not included) The Winches in this Catalogue are not for movement of humans.
D-L pulling winches are not recommended for lifting applications. For lifting, use a D-L brake or worm gear winch. D-L winches are not to be used as hoists for lifting, supporting or transporting or transporting people, or for loads over areas where people could be present,
1094
No. 6322 Quick attach 9-1/2" steel handle. Easy to remove and attach. Fits hand winches with 5/8'' drive shaft, Model Nos. DL 1700 - All dates; DL1800 -1990 to present; DL2000 & DL2500 - late 1980 to present; DL3500 - late 1992 to present.
ORDER NO. 106-63220
No. 6318 Standard 9-1/2" steel handle. Fits hand winches with 1/2" drive shaft, Model Nos. DL 1400 - 1970 thru 1981, late 1982 to present; DL1402 - All dates; DL1602 & DL1802 - 1973 thru late 1980.
ORDER NO. 106-63180*
CABLE CLAMP
For Dutton Lainson Pulling and Brake Winches. Mfr. No. 24350
ORDER NO. 106-62850
No. 6319 Standard 9-1/2" steel handle. Fits hand winches with 5/8" drive shaft, Model Nos. DL 1400 - 1982; DL1602 & DL1802 - 1980 to present.
ORDER NO. 106-63190
106-63070 & 106-63180 Handles are interchangeable. The only difference being the length.
106-63070 106-63190
106-63180 106-63220
1095
TRAILER ACCESSORIES
SKYWINCH ROPE WINCH
The revolutionary SKYWinch is the OPPOSITE of traditional ratchet winches and eliminates the hassles and dangers of trailering. Simply leave a bow-line attached to your boat and walk it to your trailer without wading in. Then just place the rope into SKYWinch, pull tight, and start cranking. The patented wheel grips the rope and easily pulls most lighter-weight boats under 18 feet. The crank arm will not spin backwards until released with trigger for control led payout. Accepts ropes to 1/2" diameter and fits most standard trailers with included mounting bracket and hardware. Needs no spools, straps, cables, or ratchets For most boats under 18' Includes mounting bracket & hardware to fit standard trailers Recommendations: For best results, use only "High Capacity" Double-Braided Nylon (non-core) line Make sure rope break-strength exceeds boat weight Always keep tension on rope when loading Warnings: Not for transport of Humans. Always use Safety Chains and/or Tie Downs for towing. Use only as directed. Manufacturer not responsible for user results.
ORDER NO. 937-01000 Mfr. No. SKYWINCH
Model 315
17' Suggested max. Boat Length, up to a maximum of 4000 lbs. Power-in/Free-wheel out Switch and lanyard cord 20' x 7/32" cable
Model 712A
23' Suggested max. Boat Length, up to a maximum of 6000 lbs. Power-in/Free-wheel out Switch and lanyard cord 40' x 7/32" cable Manual Hand Crank ORDER NO. 409-77712 Mfr. No. P77712 Pulley Block 60 Amp Standard wiring harness 14' per minute 12 V 29 lbs.
Model 912
30' Suggested max. Boat Length, up to a maximum of 11,500 lbs. Power-in/Free-wheel out Switch and lanyard cord 40' x 7/32" cable Manual Hand Crank Pulley Block 60 Amp Standard wiring harness 8' per minute 12 V 36 lbs.
1096
TRAILER ACCESSORIES
W
RC 30
eve made loading your boat onto the trailer easier than ever! The RC 30 and RC 23 are remote operated. Say goodbye to sore muscles from cranking and pulling your boat onto the trailer. With Powerwinchs new RC 30 and RC 23, stand back and simply push the REMOTE and watch the boat glide on to the trailer! Yes! Get the latest in technology and strength with Powerwinch RC 30 and RC 23 state-of-the-art trailer winches. All Powerwinch 12V trailer winches have smooth running gear systems for long-life wear and tear. They feature a corrosion-resistant zinc-plated frame, an aircraft quality cable, a level wind system to prevent cable snarls, and UV resistant ABS plastic housing.
The RC 30 & RC 23 feature a built-in light enclosed in the trailer winch casing so you can use your boat at night!
Wireless remote operated trailer winch for boats up to 11,500 Lbs. Added convenience of a light enclosed in the trailer winch casing to assist you Vertical lift capacity (single line) 4000 lbs, or double pull/line capacity 7500 lbs. (Not to be considered or used as a hoist) Emergency crank conveniently stores in casing Remote power-in / freewheel-out operation Re-designed, stronger housing Pulley block provides for double line applications 60 amp standard wiring harness One year limited warranty Max. boat length: 30' / Max. Boat weight: 11,500 lbs Mfr. No. P55950 ORDER NO. 409-55950
RC 30
RC 23
Wireless remote operated trailer winch for boats up to 7,500 Lbs. Added convenience of a light enclosed in the trailer winch casing to assist you Vertical lift capacity (single line) 2400 lbs, or double pull/line capacity 4300 lbs. (Not to be considered or used as a hoist) Emergency crank conveniently stores in casing Remote power-in / freewheel-out operation Re-designed, stronger housing Pulley block provides for double line applications 60 amp standard wiring harness One year limited warranty Max. boat length: 23' / Max. Boat weight: 7,500 lbs Mfr. No. P55750 ORDER NO. 409-55750
RC 23
Model
RC 30 RC 23
*When calculating boat weight, be sure to include boat, motor, fuel, gear and supplies. If in doubt, select the next larger size.
1097
TRAILER ACCESSORIES
SA SERIES ELECTRIC WINCHES
Features Power-in, Power-out, controlled Freewheeling clutch and automatic brake. Available in 120 volt AC and 12 volt DC models. SA model equipped with flexible high strength 7 x 19 galvanized aircraft cable. SA9000 and SA12000 also accept 2" wide strap. Emergency crank handle is standard equipment.
AC MODELS
120 volt AC operation complete with 10 foot, 3 wire ground power cord and built-in 3 position rocker switch. Available with CSA NRTL/C approval, signifying the winch has been evaluated to applicable ANSI/UL and CSA standards for use in the U.S. & Canada. NRTL (Nationally Recognized Testing Laboratory) is designation granted by OSHA to laboratories which have been recognized to perform certification to U.S. standards.
069-09000
069-12001
DC MODELS
High-torque 12 volt DC motor has circuit-breaker overload protection. StrongArm DC electric winches have a dynamic motor break as well as a mechanical friction brake to securely hold the load. DC models include wiring harness, 25 foot positive battery wire, and 8 foot ground wire.
Electric Winches
ORDER NO. 069-09000 069-09001 069-12000 069-12001 VOLTS 12V DC 120V AC 12V DC 120V AC RATED LOAD CAPACITY 3000 lbs. 2700 lbs. 4500 lbs.(1) 4000 lbs.(1) GEAR RATIO 570:1 570:1 570:1 570:1 CABLE SIZE LENGTH 7/32" x 25' 7/32" x 25' 7/32" x 50' 7/32" x 50' PULLEY MODEL NO. BLOCK & HOOK SA9000 SA9000AC
SA12000 SA12000AC
he electric switch and clutch controls are both located on the same side for easy operation. The electric switch powers the load in and out - when released, it automatically returns to the off position. The clutch control provides for smooth load control from a locked to a freewheeling position. It automatically returns to a locked position when released. The clutch can be used for a controlled load release without electric power, if desired. The clutch can also be locked in the free-wheeling position for easy cable removal.
Approximate Amperage Drain (Full Load) AC Models 6 Amps DC Models 70 Amps For intermittent use only. Ratings are based on 10' lift. For longer lifts at full capacity occasional motor cooling periods should be allowed.
All D-L StrongArm electric winches are built for multi-purpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting, or transporting people; or for handling loads over areas where people could be present.
PERCENT INCLINE
MODEL NO. SA9000 SA9000AC SA12000 SA12000AC 5% (3) 20,000 18,000 30,000 26,600 10% (6) 15,000 13,500 22,500 20,000 20% (11) 10,200 9,100 15,300 13,600 30% (17) 7,800 7,000 11,700 10,400 50% (26) 5,500 5,000 8,300 7,400
GUIDE TO ROLLING LOAD CAPACITY (3) Maximum weight in rolling load pounds.
LOAD CAPACITY
3,000 lbs. 2,700 lbs.
Double Line 4,500 Double Line 4,000
NO LOAD
Full Reel 11 18 5 9
LOAD CAPACITY
Empty Reel 2.5 3.5 1.5 2
lbs. lbs.
All capacities shown are with 15' of cable on the reel and a 10% rolling friction factor. For a full reel of cable adjust capacities according to graph above. Note 5% incline is one half foot rise in ten feet.
1098
1099
For 12-volt DC StrongArm winch models. This attachment permits the user to operate the StrongArm winch from a location up to 10 feet away. It features a solenoid-control box which mounts next to the winch and plugs directly into the winch switch pocket without rewiring. It has a durable hand-held pendant switch at the end of the cord which can be unplugged for safe storage. Individually cartoned. ORDER NO. 106-63710
For 12-volt DC StrongArm winch models. This kit includes a heavyduty three-position rotary switch, 80 amp circuit breaker, 15 feet (+) and 5 feet () battery wires and two 10-foot switch-to-winch wires. The switch can be conveniently mounted in the vehicle dashboard for easy access. It plugs directly into the winch switch pocket without rewiring. Individually packaged. ORDER NO. 106-63831
1100
TRAILER ACCESSORIES
TRAILER SEALS
ORDER NO. 018-11750 018-11760 018-11770 018-11780
018-11050
018-11770
1101
TRAILER ACCESSORIES
HULL SAVR BOAT GUIDES Hull Savr Boat Guides are designed to absorb impact of the hull and protect the trailers finish. Poly vinyl protector pads eliminate metal to metal contact and prevent rust. Universal Anti-Shock mounting brackets included.
1102
TRAILER ACCESSORIES
FIXED ANGLE ROLLER GUIDE
Mount these 13" rubber rollers on top or beneath the frame for added adjustment. The hot dip galvanized mounts adjust for widths up to 13" on each side and fit frames up to 4". Sold in pairs with hardware included. Fixed Angle Roller Mfr. No. 86102
ORDER NO. 404-86102
Side Guide Light Bracket Kit (Not shown) Mfr. No. 86107
ORDER NO. 404-86107
BOAT GUIDES
Adapts to all tube and channel trailer frames. Hot dip galvanized for lasting protection. Heavy duty steel component parts. Heavy duty 4' x 2-3/8" PVC guide tubes, 16" of adjustment. All hardware included. Mfr. No. 86105
ORDER NO. 404-86105
1103
TRAILER ACCESSORIES
ROLLER STYLE BOAT GUIDE-ON
Rollers already pre-assembled to posts Makes boat loading easier. Galvanized posts are preassembled with 9" roller and end caps. Height 21" with adjustment out to 13" each side. Can be mounted on top of frame for extra height. Complete for trailer frames up to 3" wide x 4-1/2" height. Display box. Use kit #336-11416 longer u-bolts for frames up to 3" x 5-1/4" Use kit #27630A for raised mounting of tail lights, (special order). Mfr. No. 27610 ORDER NO. 336-27610
1104
Makes it easy to see the end of trailer while on the road or when loading or unloading. Galvanized post extends more than half-way into each non-marring heavy-duty 2" PVC tube for extra stability. Can be mounted on top of frame for extra height. Complete for trailer frames up to 3" wide x 4-1/4" height. Display box. #27620 Post inserted 18" into PVC tube. Can be extended out to 13" from each side of trailer frame. #27640 Post inserted 36" into PVC tube. Can be extended out to 19" from each side of trailer frame. Use kit #336-11416 longer u-bolts for frames up to 3" x 5-1/4" Use kit #27650A for raised mounting of tail lights, (special order).
ORDER NO. 336-27620 336-27640
336-27620 336-27640
Carpeted bunkboards provide proper center loading even in wind or side current conditions. Marine grade 2" x 4" x 5 Ft. boards tilt and are covered with high grade marine carpet. Distance between galvanized upright posts can be adjusted to fit trailer. Height of 21" with adjustment out to 13" each side. Can be mounted on top of frame for extra height. Complete to fit frame up to 3" wide x 4-1/4" height. Display box. Use kit #336-11416 longer u-bolts for frames up to 3" x 5-1/4". Use kit #27630A for raised mounting of tail lights, (special order).
Same solid construction as our larger model. Bunk is 24" long, covered with deluxe marine carpet, and mounted with an extra strong adjustable bracket. Height of 21" with adjustment out to 13" each side. Can be mounted on top of frame for extra height. Complete for frames up to 3" wide x 4-1/4" height. Display box. Use kit #336-11416 longer u-bolts for frames up to 3" x 5-1/4". Use kit #27630A for raised mounting of tail lights, (special order).
336-27600
336-27660
GALVANIZED U-BOLTS
ORDER NO. 336-15283 336-15286 336-15287 Mfr. No. 15283GA 15286GA 15287GA Dia/Thread 1/2"-13 1/2"-13 1/2"-13 Width 3-1/16" 2-3/8" 3-1/16" Length 3-13/16" 5-3/8" 6-11/16" Form Square Round Round
336-11416
336-15283
1105
TRAILER ACCESSORIES
POST GUIDE-ONS WITH LED LIGHTED POSTS
40" tall or 60" tall
Red (faces backwards) and Amber (faces forward) LED lights Improve visibility on the road and on the ramp Tough and shockproof Clear colourless when off Galvanized arms and non-marking PVC posts (notched to prevent twisting) Fits frames up to 3" wide x 4-1/4" high Mounting hardware and wiring included Sold in pairs ORDER NO. 336-27740 ORDER NO. 336-27760
Model 27740
Height 40" Adjusts out to 13" each side Fits frames up to 3"W x 4-1/4"H 1-1/2" sq. 16 ga pre-galvanized steel post extends 18" into 2" PVC tube for strength
Model 27760
Height 60" Adjusts out to 19" each side Fits frames up to 3"W x 4-1/4"H 1-1/2" sq. 16 ga pre-galvanized steel post extends 36" into 2" PVC tube for strength
Includes:
(2) formed galvanized brackets (2) pieces of color coded 3- conductor bonded wire, 8 ft. length each (4) terminals and 4 butt connectors plus hardware for mounting to PVC posts ORDER NO. Mfr. No. 336-27650 27650A
Kit Includes:
(4) Galvanized steel clamps (2) 1-1/2" Hex Head Screws, Zinc (2) 2-3/4" Hex Head Screws, Zinc (4) Washers, Zinc ORDER NO. Mfr. No. 336-27682 27682A
Size 11" x 12' 11" x 150' (bulk) 18" x 18' 11" x 12'
1106
TRAILER ACCESSORIES
ROLLER BUNKS
Change bunk trailers to roller-type Made of heavy gauge galvanized steel for long lasting rust protection. Can be mounted on existing flat bunkboards, or use special mounting brackets (sold separately) for height and angle adjustment. Note: Mounting hardware not included Easier loading and unloading on short or un-improved ramps Replaces bunk boards or may be added on top of existing bunks Channel-style bunks pre-assembled Channel 2-1/8"W x 2-1/2"H Pair supports up to 1,500 lbs. ORDER NO. Mfr. No. 336-27700 27700
336-27710
27710
Description 4 ft. Roller Bunk, Galvanized, Pair, boxed 5 ft. Roller Bunk, Galvanized, Pair, boxed
ROUND FENDERS
5-1/4"H x 6"W for mounting a 7" wide fender used on 8"-12" tire & wheels 8-1/4"H x 6-1/2"W for mounting a 8" or 9" wide fender used on 13", 14" and 15" tire & wheels
Description For 7"W Fender used on 8"-12" tires For 8" or 9"W Fender used on 13",14" or 15" tires
1107
TRAILER ACCESSORIES
PLASTIC FENDERS
High density polyethylene (HDPE) fenders. Injection molded. Corrosion proof. Impact resistant, 300 lb. capacity. Molded-in color is scratch proof. Built-in fender skirt. Optional integral step pad. Handles temperature extremes. Mounting slots.
Dimensional Information
Mfr. No.
Tire Size
M (1)
M (2)
M (3)
M (4)
8.75
22.70 4.00 1.50 3.00 28.00 4.00 2.12 3.75 30.00 4.00 2.12 3.75
M4 4
BEARING PROTECTORS
Protects wheel bearings from the elements during all trailer operations. Automatically maintains the correct internal pressure cannot damage seals. Chrome-plated steel construction. Sold in pairs and are available in bulk or full color display packages. Some models include vinyl cover. ORDER OR DER NO. NO. Mfr. No.
Description Hub Dia.
178-06040 BPC1780604* Bearing protector/clam pack, with covers 198-06040 BPC1980604* Bearing protector/clam pack, with covers 178-10112 BB17810112* 198-00112 BB19800112*
*Bulk versions also available.
1.780 1.980
CR8008 CR8012
Bunk carpeting, Black, 8" x 144" Bunk carpeting, Black, 12" x 144"
BOA AT GUIDES
Boat guides help you visually guide your boat onto your trailer. Highstrength super gripper mounting brackets attach rmly above and below the trailer frame. Easy bolt-on mounting ts trailer frames up to 3 x 5 high. Adjustable to provide optimum t to any hull design. ORDER OR DER NO. NO. Mfr. No. 075-44010 GB44 0101 075-15001 GB150 0100 075-20101 BGR20 0101
Description Hub Dia.
Mfr. No.
Description
OML 0127
Non-marring, marine grade PVC tubing Non-marring, marine grade PVC tubing Galva-Tec nish, steel construction with nonmarring, cushioned rollers
TK100 0100 Heavy-duty, hardened steel construction. Adjustable to t most trailer wheels up to 15. Includes brass lock and key set.
1108
TRAILER ACCESSORIES
STAINLESS STEEL WHEEL BEARING PROTECTOR
The only sure way to prevent trailer wheel bearing failure from ruining your trip is with the Stainless Steel Wheel Bearing Protector. Stainless steel barrel and components will outlast your boat. Keeps water and dirt out of hubs and bearings. Makes boat trailer hubs safely submersible, even in saltwater. Eliminates both the need and the mess of bearing re-packing. Automatic grease pressure control feature prevents overfilling and seal damage.
ORDER NO.
Chrome Plated
ORDER NO.
ORDER NO.
ORDER NO.
202-27170
Outer Bearing Cone LM67048, hub not counter-bored LM67048, hub counter-bored, 15123 & others 14124,14125A
Bra Model
19 B 17 B 23 B
SELECTION CHART
ORDER NO. 004-00010 004-00020 004-00030 004-00040 004-00050 004-00070 004-00080 004-00090 004-00100 004-00110
Model 1 2 3 4 5 7 8 9 10 11
Use With Bearing Buddy 1.980 1.980,1.968, 2.562 1.980 1.938, 1.980T 1.980 1.781 2.328 1.938, 1.980T 1.810 2.441
If Inner Bearing Cone Number is L44643 LM48548, L68149 LM29749 15123 L44649 LM67048 LM67048 15123 L68149 25580
And Seal Diameter is 1.98" 2.56" 2.56" 2.63" 1.98" 2.33" 2.33" 2.50" 2.36" 3.38"
1109
TRAILER ACCESSORIES
HUB KITS
Ready to Roll Pre-Greased Hub Kits. All kits include: bearings, seals, dust cap, cotter key, and lug nuts. Bearings and hub cavity 100% pregreased. Triple Lip Grease Seal and Bearings are preassembled.
ORDER NO. 404-81060 404-81065 404-81080 404-81085 404-81090 Mfr.No 81060 81065 81080 81085 81085 Description 4 Stud Hub Kit (1250#) 4 Stud Hub Kit (1350#) 5 Stud Hub Kit (1250#) 5 Stud Hub Kit (1350#) 5 Stud Hub Kit (1750#) Contains 1" Inner & Outer Bearings 1-1/16" Inner & Outer Bearings 1" Inner & Outer Bearings 1-1/16" Inner & Outer Bearings 1-3/8" Inner & 1-1/16", Outer Bearings For Tapered Spindles
Description 3/4" Bearings w/ Dust Cap 1" Bearings w/ Dust Cap 1-1/16" Bearings w/ Dust Cap 1-1/16" x 3/4" Tapered Bearings w/ Dust Cap 1-1/4" Bearings w/ Dust Cap 1-1/4" x 3/4" Tapered Bearings w/ Dust Cap 1-3/8 Bearings w/ Dust Cap 1-3/8 X 1-1/16" Tapered Bearings w/ Dust Cap
ORDER NO. 404-81106 404-81111 404-81116 404-81121 404-81126 404-81131 404-81136 404-81141
CUP ORDER NO. 404-81301 404-81305 404-81305 404-81307 404-81309 SEALS ORDER NO. 404-81311 404-81310 404-81312
FITS
3/4" 1"& 1-1/16" 1-1/4"
No. of Studs 4 5 5
Bearing I.D. Inner Outer 1" 1" 1" 1" 1.38" 1.06"
Taper 60 60 60
Description
Grease Cap Grease Seal Grease Seal for Hub # 060-47340 Wheel Bolt Wheel Nut & Pin
Hub Group
A&B A&B C A, B, & C A, B, & C
1. 2. 3. 4.
1110
TRAILER ACCESSORIES
WHEEL CHOCKS
Prevents trailer from rolling Extra safety for tire changing and trailer storage Fold flat for easy storage Protection against slippage anytime a trailer needs to stay put. Strong heavy gauge metal chocks fold flat for transport and set up in seconds. Convenient package of two takes up very little room. Each folded: 5" x 6" x 1-1/4". Each set up: 5" x 6" x 4". Display pack.
Order No. 336-32600
13110 13210
1" 1"
Capacity
15"
1.98"
BEARING KITS
Replacement wheel bearing sets for trailer hubs include bearings, cups, seal, cotter pin.
Outer Bearing
L44643 L44649
1111
Length 8"
RIBBED ROLLER
This popular style is used on many all roller and self-loading trailers. It features a large 5'' outer diameter for maximum support and a 1-1/2'' wide nylon bearing surface for easy turning on the roller axle. Made of black molded rubber. Nylon bushing insert.
ORDER NO. 336-29530 103-13936 103-13931 103-13933 103-13935 103-13934
Length 12"
WOBBLE ROLLER
1/4'' thick plated steel washer chemically bonded to rubber. Wont tear out!
ORDER NO. 103-31166
Length 4-1/4''
O.D. 4-1/4"
ORDER NO.
END CAPS
Rubber end caps are a direct replacement for the original equipment on many trailers. Fits standard brackets and shaft sizes.
ORDER NO. 336-29590
Diameter 2"
Length 1-3/4"
Kit includes:
(2) 8" Keel Roller, 5/8" ID (4) 5" Spool Roller, 5/8" ID (2) 4" Spool Roller, 1/2" ID (2) 3" Bow Roller, 1/2" ID (2) 4" Bow Roller, 1/2" ID (2) Y-Stop, 4x4, 1/2" ID (2) Y-Stop, 3x3, 1/2" ID (2) Y-Stop, 2x2, 3/8" ID (2) 2" End Caps, 1-3/4"L, 1/2" ID
ORDER NO.336-29599 Mfr. No. 29599A
1112
TRAILER ACCESSORIES
AMBER
Description Keel Pad 15x3.5 (clear gold - 3" beams) 4 Roller, bow 4 End Bell 3 Roller, bow 3 End Bell End Caps (5/8x3-1/2)
No. ORDER NO. Shaft Size A B C D E F G H I J K L M N O P 404-48650 404-48651 404-48652 404-48653 404-48654 404-86198 404-86142 404-86143 404-86144 404-86284 404-86158 404-86283 404-86159 404-86169 404-86199 404-86285 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 1/2" 1/2"
4 Roller Assembly w/end bells 3 Roller Assembly w/end bells Wobble Roller Kit (5 ribbed)* 4 Keel Roller - spool type
5 Keel Roller (center guided) 5 Keel Roller - spool type 8 Keel Roller 10 Keel Roller 12 Keel Roller V Bow Stop - 3
*Includes 4 rollers, 7/8" and 1.15" bushings, hog ring and washers.
BLACK
M N O P
ORDER NO. 404-86402 404-86400
No. Description
A
Shaft Size 1/2" 1/2" 5/8" 5/8" 5/8" 5/8" 3/8" 1/2" 1/2"
3" Roller, Bow 4" Roller, Bow 4" Keel Roller - spool type 5" Keel Roller (center guided) 5" Keel Roller - spool type 8" Keel Roller V Bow Stop - 2" V Bow Stop - 3" V Bow Stop - 4"
B C D E F G
H
F
404-86420 404-86413 404-86421
BLACK KIT
ORDER NO. 404-86435 Mfr. No. 86435
(3) each (3) each (2) each (2) each (2) each (2) each (2) each (2) each (2) each
4 V Bow Stop 5 Keel Spool Roller 8 Keel Roller 5 Keel Roller 4 Keel Spool Roller 4 Bow Roller 3 Bow Roller 2 V Bow Stop 3 V Bow Stop
AMBER KIT
Product selection may vary. ORDER NO. 404-86436 Mfr. No. 86436
1113
TRAILER ACCESSORIES
BOLSTER & SWIVEL BRACKETS
Bolster brackets are designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity. (Sold 2 per pack). Slot size 1-1/16". Bracket Length 8 Inch 10 Inch 12 Inch Slot Length 2-3/4" 3-3/4" 4-3/4"
ORDER NO. 404-81210 404-81215 404-81220
SWIVEL BRACKETS
Use with adjustable bolster brackets for proper angle of bunk or bolster boards. Packed in pairs with 1/2" x 1" bolts and 1/2" nyloc nuts or purchase in bulk. 2 per pack
ORDER NO. 404-86160
ROLLER SHAFTS
Colorful packaged pal nuts and roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
BUNK BRACKETS
Heavy duty hot dip galvanized 11 gauge steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls. Packed in pairs. Bracket Length 9-1/2" 12-5/8" Slot Length 6" 9-1/8"
ORDER NO. 404-81225 (2-Pack) 404-81230 (2-Pack)
SIZE Zinc Plated 1/2" x 4-1/4" 1/2" x 5-1/4" 1/2" x 6-1/4" 5/8" x 5-1/4" 5/8" x 6-1/4" 5/8" x 9-1/4" 5/8" x 11-1/4" 5/8" x 13-1/4" 5/8" x 15-1/4" *Limited Quantity
ORDER NO.
ORDER NO.
Bulk* N/A
404-12525
N/A
404-86037 404-86038 005-58925 005-58115 005-58135
N/A
PANEL BRACKETS
Brackets are one piece, heavy duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical roller adjustment. Roller SIZE 5" 8" 12" Width Between Slots 3" 6" 10" Bracket Width 5-3/8" 8-3/8" 12-3/8"
ORDER NO. 404-86151 404-86152 404-86153
U-BOLTS
Used for mounting brackets to trailer frame. Zinc coating to help prevent rusting. Includes flat washers and nyloc nuts. A 7/16"-14 1/2"-13 1/2"-13 1/2"-13 3/8"-16 B 2-1/16" 3-1/8" 3-1/8" 4-1/8" 2-1/8" C 2-5/16" 3" 4" 3" 4" D 1" 1-1/2" 2" 2" 1-3/4" Shape Square Square Square Square Square
ORDER NO. 404-86228 (Each) 404-86205 (Pair) 404-86206 (Pair) 404-86207 (Pair) 404-86208 (Pair)
A = Rod Width - Threads Per Inch B = Between Leg Length (Inside thread) C = Leg Length D = Thread Length
1114
TRAILER ACCESSORIES
FRAME STRAPS
GALVANIZED 1/4" thickness
ORDER NO. Mfr. No. 336-20016 20016GA 336-20017 20017GA 336-20028 20028GA
Standard lamp mounting holes 3/8" carriage bolt hole for frame mounting
ORDER NO. Mfr. No. 336-26057 26057 Matl 11 ga.
3-1/8" 4-1/2" 1-1/2"
1115
TRAILER ACCESSORIES
HYDRAULIC DRUM BRAKES
Absolutely, Positively the MOST Corrosion Resistant Drum Brake PERIOD! The GalvX system is composed of inorganic polymers which bond metallic zinc flakes to the metal surface. Aluminum wheel cylinder Stainless steel springs Brake pads are bonded and riveted with bronze rivets to backing plate Superior saltwater performance over standard drum brakes
ORDER NO. Mfr. No. Description 404-81097 81097 10" GalvX Drum Brake Assembly L & R 12" GalvX Drum Brake Assembly L & R 404-81098 81098
BRAKE ACTUATORS
Cast steel latch handle Stronger, lays flatter, better looking Quick Lock 2" coupler Coupler in closed position will auto lock on the hitch ball Aluminum master cylinder Corrosion resistant Cast steel ball clamp Stronger than stamped steel Safety pin locks the coupler to the ball Coupler stays locked to the hitch ball even if latch is damaged Grease fittings on roller pins Grease rollers with ease, longer life, better operation Dampener built-in and pre-loaded No need to load dampener before bleeding the brakes For disc brake only models Solenoid built into master cylinder Solenoid can be cleaned or exchanged without removing the brake line or removing the actuator from the trailer
ORDER NO. 404-82401 404-82400 404-82402
1116
TRAILER ACCESSORIES
404-82091
1117