Beruflich Dokumente
Kultur Dokumente
A333 Grade 6 Carbon Steels Material Property Data Sheet - Product availability and request a quote
Home
a333 grade 6 carbon steels material property data sheet - product availability and request a quote
Search:
Availability
Carbon Steels A333 Grade 6 is stocked by 11 North American distributors and produced by 4 large mills. Distributors will offer small quantity buys while mills will generally only sell large quantities, with delivery times anywhere from 10 to 50 weeks depending on size and form required This material is stocked primarily in Tubular Products by 10 distributors but is also available to a lesser extent in Piping Components. For distributor (small quantity) availability click here For mill (large volume) production click here To view all click here
Specifications
The following specifications cover Carbon Steels A333 Grade 6 ASTM A106 (B) ASTM A333 Grade 6 ASTM A369 (FPB) UNS K03006 ASTM A234 (WPB) ASTM A334 Grade 6 ASTM A556 (C2)
Property Results
www.suppliersonline.com/propertypages/A3336.asp 1/3
7/12/13
A333 Grade 6 Carbon Steels Material Property Data Sheet - Product availability and request a quote
Chemistry Data :
[top]
This specification covers seamless and welded steel pipe for low temperature service. The Grade 6 alloy steel involved is similar to AISI 4032 low alloy steel.
Applications
Machinability
Forming
The product comes in piping form but may be formed readily by conventional methods.
Welding
Heat Treatment
Product is supplied in the normalized, 1500 f and air cooled, condition. It may be quenched and tempered by heating to 1475 F, quench in circulating water and then temper by re-heating to 1100 F and rapid air cooling.
Forging
Product is supplied in pipe form and not normally forged from that shape.
Hot Working
Hot working may be done qt 2000 F down to 1600 F if need be. Do not hot work below 1550 F and immediately following hot working cool in a controlled atmosphere furnace from a temperature above 1550 F.
Cold Working
Annealing
Aging
Not applicable.
Tempering
Hardening
www.suppliersonline.com/propertypages/A3336.asp
2/3
7/12/13
A333 Grade 6 Carbon Steels Material Property Data Sheet - Product availability and request a quote
Other Comments
Grade 6 is a low alloy steel similar to 4032 in properties. Tensile strength requirement for Grade 6 is 60 ksi minimum and notched-bar impact strength is 4 to 13 ft. lbs. depending upon section size.
Physical Data :
[top]
Density (lb / cu. in.) Specific Gravity Specific Heat (Btu/lb/Deg F - [32212 Deg F]) Melting Point (Deg F) Thermal Conductivity Mean Coeff Thermal Expansion Modulus of Elasticity Tension Modulus of Elasticity Torsion
Mechanical Data :
[top]
Disclaimer This information is provided "as is" and Metal Suppliers Online, Inc. makes no warranty of any kind with respect to the subject matter or accuracy of the information contained herein. Metal Suppliers Online, Inc. specifically disclaims all warranties, expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular purpose. In no event shall Metal Suppliers Online, Inc. be liable for any special, incidental, indirect or consequential damages of any kind or any damages whatsoever resulting from loss of use, data, profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out of or in connection with the use of the information contained herein. This publication may include technical inaccuracies or typographical errors. Changes may be periodically made to the information herein.
Use of this Web Site constitutes acceptance of the Metal Supplier s Online User Agr eement. Copyr ight 1995-2013 Metal Supplier s Online, LLC. All Rights Reser ved. Metal Supplier s Online Pr ivacy Policy | Contact Us
www.suppliersonline.com/propertypages/A3336.asp
3/3