Beruflich Dokumente
Kultur Dokumente
Career Objective:
Having 8+ yrs. of experience in Erection ,Commissioning, Operation and Maintenance in continuous running process plant with good command on INSTRUMENTATION,DCS, PLC, SCADA, Electrical and VF Drives and a part of a professionally managed company with scope of challenging career, opportunity for learning excellence and continuous improvement coupled with growth and individual development.
Academic Qualification:
2004: B.Tech (Electronics and Instrumentation Engg) with 70.5 % from Andhra University at Vishakhapatnam
Work Experience:
Presently working in SESA GOA LTD (PIEP), GOA, (450 m3 Blast furnace) under MCK KUTTY CONSULTANCY as Asst Manager Control & Instrumentation from August 2012 to till date. Working in NEELAM POWER PLANT, UTTAM GALVA STEELS LTD, 2*30 MW, Khopoli, Raighad (DT), Maharashtra as Asst Manager Control & Instrumentation from June 2011 to July 2012. Working in Bhadhrasree Steel and Power pvt ltd, 2*100 TPD, Koppal, Karnataka as Electrical and Instrumentation Manager for Erecting, Commissioning, Operation and Maintenance from March 2010 to April 2012. Working in BS Sponge pvt ltd, 3*100 TPD, Raigarh, Chhattisgarh as Electrical and Instrumentation Manager for Operation and Maintenance from May 2007 to March 2010. Working in Popuri Steels pvt ltd, Bellary, Karnataka as Electrical and Instrumentation Engineer for Erecting, Operation and Maintenance from June 2004 to April 2007.
PROGRAMMABLE LOGIC CONTROLLER (PLC): SEIMENS (S7 400 H, S7 300, S7 200), ABB, MODICON, AB and OMRAN. SCADA: WINCC 7.0, CITECT, WONDERWARE INTOUCH. AC VARIABLE FREQUENCY DRIVES (VFD): SEIMENS, AB, ABB, YASKAVA and TELEMECHANIC
Job Description:
Overall responsible for all Instrumentation activities Operation, Maintenance in Power plant (Boiler, Turbine, DM Plant etc,) and Blast furnace (pig iron plant)(HBS, BLOWER,GCS,PCI, etc,). Maintaining the IMS activities i.e.SOP, SMP, calibration procedure & report, Generation of checklists & maintenance as per checklist, history, and Spare parts management. Preparation of Instrumentation specification and plc system based on P & I Diagrams, PFD, Loop Diagrams and SAMA Diagrams. Implementation, Commissioning and preventive / predictive maintenance of all field instruments, indent and follow-up of spares, Making Commercial and Technical comparison of all types of Field Instruments, communication with vendors and suppliers. Performed Root cause analysis of defects while developing and improving the process by taking corrective action to prevent any reoccurrence and defective issues. To keep all equipments in Healthy condition by applying MTTR and MTBF.Developing and improving plant machines by performing automation projects in order to minimize breakdown of machines. Had good command on close loop control system (CLCS), open loop control system (OLCS), PID Controllers, sequence control logic diagram, protection & interlocks logic diagram, panel inter connection diagram etc. Have knowledge on Hazard identification & Risk Assessment, EHS system. Knowledge on SAP for maintenance system and procurement modules Keep Record of Maintenance and Operation parameters for Analysis
Work profile:
Good command on INSTRUMENTATION, ELECTRICAL, DCS, PLC, SCADA, VFD & HART based advanced field instruments. Experience in Logic design, Commissioning and Troubleshooting of PLC,SCADA, HMI and VFD using communication protocols including TCP/IP, PROFIBUS, DH+,DF1, MODBUS, RS-232/485 and OPC.
Personal Details:
Name Fathers name Date of birth Marital status Passport no Nationality Languages known Permanent address : SIVA PRAKASAM. PERNETI : Dhanamjayam.P : 06/06/1981 : UN married : H3563149 : Indian : Telugu, English, Hindi, : Amodhagiripatnam (vil) Jandrapet (post) Prakasam (dist), PIN: 523165
I hear by declare that the above mentioned details are true to the best of my knowledge. (SIVA PRAKASAM PERNETI)