Beruflich Dokumente
Kultur Dokumente
Used At: Author: Project: Notes: 1 2 3 4 5 6 7 8 9 10 Date: Rev: Time: 15:22:01 1/20/2012 x Working Draft Recommended Publication READER DATE Context
Block Model
Schedule
Topography Wireframe
A0
Node:
C1
Title:
S5DP OpenPit
Number: Pg 1
Node:
Title:
Number: Pg 2
I1
Block Model
I2
Topography Wireframe
Sequenced strings
Export to EPS
A6 S5DP Export to EPS
Schedule
O1
Number: Pg 3
Essentially a Semi-Automatic process that allows the user to create pit outlines, berms and roads from user defined parameters such as Face angle, bench height, berm width, road width. Berms may be tapered inside/outside, and colours assigned to the bench and berm. This data could be taken from a block model. Road colour, gradient and width are also defined.
A3: Create Mining Blocks (Complex Solids)
Description:
This creates the mining blocks from a combination of the grid/bench strings and the resulting pit and topography wireframes.
A4: Create Bench Centrelines and Points
Node:
Title:
Number: Pg 4
Description:
Each solid's centreline (in Z) will be computed along with the centrepoint of the string. This represents the Complex Solid Design type (walls and points).
Creation of dependencies in S5DP using both automatic and manual methods on the walls and points file. Solids are loaded for reference. The roads will have an implicit sequence if they are continuous.
Node:
Title:
Number: Pg 5
O2
A11
O1
I1
Node:
C3
Title:
Number: Pg 6
Activities in Diagram"A1: Define Design Parameters" A11: Define Pit Parameters A12: Create/Import Grid Layers
Description:
Create one or more generated grids or import string files to be used on certian benches. A single grid file could be used for the whole pit.
A13: Associate Grid to Benches
Description:
This would identify which grid would be used on which bench (top down). The output would be used together with the Pit Wireframes to create complex solids that can be sequenced.
Node:
Title:
Number: Pg 7
I2
I3
Topography Wireframe
O1
Road Wireframe
CXS Solids with Roads Create CXS Solids A34 WF Divide By String Create Final CXS Solids A35 WF Intersection and Union Mining Blocks CXS Solids
I1
O2
Number: Pg 8
Activities in Diagram"A3: Create Mining Blocks (Complex Solids)" A31: Create Pit Outline Wireframe
Description:
This creates the shell wireframe of the pit using the pit strings.
This creates a wireframe using the boolean operator Difference and preserving the enclosed wireframe shape of the pit and topography. This should be a single surface. The wireframe should be verified. Pit strings should be clipped to the wireframe outline and all strings outside the pit should be deleted.
This will create the Road solids from the pit road strings.
Node:
Title:
Number: Pg 9
Description:
Takes the Closed Pit Wireframe and Pit grid or bench strings and applies the strings over the bench and creates wireframes from the volume that is enclosed. This will save the CXS Solids to a datamine file.
This process will remove the road solids from the CXS Solids and combine the two wirerframes. The resulting wireframe will have road solids in green and pit solids in a different user-defined colour. The resulting wireframes represent the Complex Solid Design type (solids).
Node:
Title:
Number: Pg 10