Beruflich Dokumente
Kultur Dokumente
ACCESS SOLUTIONS
CANTILEVERED
SYSTEMS
ADJUSTABLE
SYSTEMS
FIXED
PLATFORMS
MOBILE
PLATFORMS
FIXED LADDERS
& STAIRCASES
MOBILE FALL
PROTECTION
SYSTEMS
JOB SPECIFIC
SYSTEMS
DBI-SALA
FlexiGuard™
CUSTOM ACCESS
SOLUTIONS
Industries Served.....................................4
Adjustable Systems..................................6
Mobile Platforms.....................................8
Docking Systems...................................12
Cantilevered Systems.............................14
Fixed Platforms.....................................16
Development Process.............................22
CUSTOM Any Industry, Anywhere
ACCESS SOLUTIONS
TRANSPORTATION
INDUSTRIES
SERVED
UTILITIES
4
TRANSPORTATION OIL AND GAS INDUSTRY UTILITIES WIND ENERGY CONSTRUCTION
INDUSTRY
CONSTRUCTION
WIND ENERGY
5
CUSTOM Adjustable Access Solutions
ACCESS SOLUTIONS
ADJUSTABLE
SYSTEMS Project Description: Mobile Utility
Access Ladder
Industry: Utilities
Application: Mobile design and
extended height adjustment range
allows servicing at multiple locations
and eliminates the need for site
specific systems.
Features:
• Hydraulic lift system
• Adjustable work platform cage
• Grip Strut® safety tread
Adjustable Custom Access Solutions provide
• Rise/run automatic adjustment
the ability to operate at a wide range of
platform heights. This type of adjustment
gives the worker access to various working
positions and allows one ladder to replace
multiple static height ladders. The adjustment
is provided by either hydraulic hand pump or
via standard shop air for ease of use.
6
Adapts To The Work Site
Project Description: Adjustable Height Truck Access Project Description: Aircraft Pylon Access Stand
Industry: Oil and Gas Industry: Transportation-Aviation
Application: Used to gain access to a coal truck for Application: Improves sensor access in the pylon area above
maintenance work. The unit adjusts in height for various aircraft engines. The curved platform with side rails cantilevers
applications using shop air to drive a pneumatic cylinder. over the engine to allow a worker to lean comfortably and
The articulating steps allow safely over the pylon.
the rise/run to remain
Features:
consistent at any height.
• Hand pump
Features: hydraulic adjustment
• Aluminum/Steel eliminates need for
hybrid construction power source
• Grip Strut® steps • Adjusts for different
• Adjusts through 40" aircraft or loading
of vertical travel situations
• Screw jacks for • Grip Strut® walking
enhanced stability on surfaces do not
irregular terrain collect rain or snow
• Rubber bumpers
protect aircraft from
accidental contact
Project Description: Mobile Assembly Platform Project Description: Portable Tanker Access Ladder System (PTALS)
Industry: Industry Industry: Transportation-Trucking
Application: Replacing optical components in laser arrays at a Application: Provides safe access and
research facility. The adjustable-height platform can be moved fall-protection for workers at elevated
easily eliminating scaffolding that had to be collapsed and re-built work areas. Customize by choosing
for each new location or working height. your system height, platform size,
wheel kit and fall arrest options.
Features:
• Two independent battery- Features:
operated lift tables • Adjustable height for
• Full guardrails and gates on site versatility
both platforms • Wheel options available for
• Automatically telescoping various terrain
ladder access • Numerous platform
• Bolt-on outriggers can be accessories available for
relocated front or back customization
7
CUSTOM Mobile Platform Access Solutions
ACCESS SOLUTIONS
MOBILE
PLATFORMS Project Description: Cantilever Tank Access Ladder
Industry: General Industry
Application: Mobile platform designed to fit inside contoured structure.
Adjustable platform is ergonomic and efficient.
Features:
• Protective bumper on front edge
• Diamond plate steps and desk
• Removable guardrails
• Swing gate at top of steps
8
Mobility In And Around The Work Area
Project Description: Wind Generator Motor Access Stand Project Description: Refrigerated Truck Maintenance Platform
Industry: Wind Energy Industry: Transportation-Trucking
Application: Designed to provide mobile access to wind Application: Designed to provide safe access to the refrigeration
generator motor fans during production. The top sections units on freezer trucks during maintenance and inspection.
drop into place after base platforms are positioned.
Features:
Features: • Adjustable height for use with a wide range of truck sizes
• Steel/Aluminum construction • Heavy-duty wheels for durability in the field
• Grip Strut® walking surfaces • Center guardrail includes cut away for refrigeration unit access
• Built-in lifting points on top platforms for overhead crane • Grip Strut® platform surface
• Steel base sections have a step lock mechanism
Project Description: Helicopter Access Stand Project Description: Valve Access Platform
Industry: Transportation-Aviation Industry: Utilities
Application: Designed to be positioned by one or two people to Application: Designed to access valves over large pipes inside
provide access to a helicopter airframe. The pull-up railing post treatment facilities. Easy to move from pipe to pipe with
allows rotor to fit underneath during placement. minimal setup effort.
Features: Features:
• Screw jacks at corners for enhanced stability • Galvanized
• Cutaway in center of platform to accept rotor shaft finish for wet
• 2 person or 500 lb capacity environment
• Switchback access ladder • Grip Strut®
platform does
not hold water
• Maximum
clearance under
the platform
• Spring-loaded swing
gates at access points
9
CUSTOM Mobile Fall Protection Systems
ACCESS SOLUTIONS
MOBILE FALL
PROTECTION
10
Portable, Adjustable And Safe
11
CUSTOM Docking System Access Solutions
ACCESS SOLUTIONS
DOCKING
SYSTEMS
12
Multiple Configurations, Ultimate Flexibility
Project Description: Jet Wing Docks Project Description: Helicopter Access Stand
Industry: Transportation-Aviation Industry: Transportation-Aviation
Application: Provide safety to U.S. Air Force personnel during Application: Designed for gaining access to the helicopter
sand-blasting operations on aircraft. Individual platforms airframe in hangar environments. Incorporates swinging fall
encapsulate the wing area and can be handled separately, or protection railing to guard areas of the aircraft that can be
linked together when in use. walked on, and includes relief cut-outs on the platform to
accept parts that extend from the aircraft.
Features:
• Floor locks for added stability Features:
• Removable 42" guardrails • 50° forward descent ladders for access to platform
• Diamond tread • Full bumper on contact points with aircraft
walking surfaces • Pneumatic flip doors accept engine cowling when open
• Manual height • Adjustable height railings eliminate contact
adjustment with rotor during positioning
via forklift
or multiple
people
• Protective
bumpers
along inside
of platforms
13
CUSTOM Cantilevered Access Solutions
ACCESS SOLUTIONS
CANTILEVERED
SYSTEMS Project Description: Cantilevered Engine Access Ladder
Industry: Transportation-Aviation
Application: Designed to maintain turbine engines for the aeronautical
industry. The cantilevered platform and mobile design allow access to a
variety of applications.
Features:
• Welded steel construction
• Grip Strut® safety tread
• Step Lock® safety system
• 50° safety angle ladder
• Mobile design
Cantilevered Systems allow the user to be
suspended over an area of interference.
These products can be mobile or fixed and
provide the user with a way to reach over
obstacles that standard access equipment
cannot. This is an ideal solution when
working on or near delicate structures such
as aircraft.
14
Extending Your Work Area
Project Description: Generator Access Ladder Project Description: Engine Access Ladder
Industry: Utilities Industry: Transportation-Aviation
Application: Cantilever design with floor access provides Application: Provides safe access over the top of aircraft
opening for worker accessing generator in power plant. engines on the manufacturing floor. Side cantilever design
allows the stand to fit into tight spaces.
Features:
• Steel construction with locking wheels Features:
• Floor opening provides access to structure below • Locking wheels
• Platform is fully surrounded by guard rails for mobility
• Counterweighted for a
450 lb capacity
• Adjustable height
to fit different
engine designs
• Cantilever platform
can be interchanged
with guardrail for use
on either platform
Project Description: Helicopter “Beanie Stand” Project Description: Wind Generator Hub Access Ladder
Industry: Transportation-Aviation Industry: Wind Energy
Application: Designed to access the “beanie” area on top of Application: Provides safe access to the top of the hub to rig
the rotor on helicopters. Platform designed to hang over the overhead crane lifting point for plant floor transportation.
helicopter and adjust in height. Articulating ladder adjusts its
Features:
incline automatically with the changing platform height.
• Grip Strut® walking surfaces and
Features: heavy-duty locking wheels
• Locking wheels for mobility • Guardrails extend over top of
• Cantilever support under the helicopter eliminates the need hub for complete protection
for counterweight • Cantilevered design provides
• Height adjust with hand pump and close-up fit
hydraulic cylinders • 75° marine angle ladder to
• Articulating ladder maintains minimize footprint
code-compliant rise over
36" height adjustment
15
CUSTOM Fixed Platform Access Solutions
ACCESS SOLUTIONS
FIXED
when not in use
• Diamond tread deck
16
Permanently Integrated Into Your Work Area
Project Description: Heavy-Duty L-Shaped Crossover Project Description: Gas Truck Access Gangway
Industry: Utilities Industry: Oil and Gas
Application: Designed to provide access to a recessed concrete Application: Designed to provide access to the tops of gas
pit at a power plant. Crossover feature allowed access over a trucks in a prefabricated truck dock building.
short wall.
Features:
Features: • Hi-Vis yellow and reflective tape enhances driver visibility
• Galvanized finish for weather resistance • Gangways have pneumatic assist pistons for ergonomic use
• Grip Strut® does not collect rain, snow, or debris • Grip Strut® walking/working
• Varied ladder heights available surfaces
• Foot plates for bolting to a concrete pad • Center guardrail on platform
is cut away for refrigeration
unit access
Project Description: Oil Pipe Crossover System Project Description: Locomotive Production and
Maintenance Platform
Industry: Oil and Gas
Industry: Transportation-Rail
Application: Designed to span over existing pipes, duct work,
and walls. Crossovers designed in multiple small sections for Application: Designed for maintaining and servicing various
ease of installation. locomotive components. Modular system allows multiple
platforms to be connected together.
Features:
• All aluminum Features:
construction • Welded steel construction
• Heavy-duty • Diamond tread work surface
channel frame • Grip Strut® safety tread
• Wide grip • Powder-coat finish
strut steps
and deck
• Adjustable
feet for
leveling
purposes
17
CUSTOM Fixed Ladder And Staircase Access Solutions
ACCESS SOLUTIONS
FIXED LADDERS
AND STAIRCASES Project Description: Dual Aluminum ADA Staircase
Industry: Construction
Application: Designed to provide ADA compliant stair access to a building.
Features:
• Welded aluminum construction
• ADA compliant hand/guardrail system
• ADA compliant rise/run step constraints
18
Secure Vertical Access
Project Description: Roof Hatch Access Ladder Project Description: Fixed Steel Ladder System
Industry: General Industry Industry: Utilities
Application: Designed to provide access to a roof hatch. Application: Designed
to access a storm drain
Features:
for periodic maintenance
• Mid-way platform for easy hatch access and opening
and inspection. This system
• Perforated tread rungs and Grip Strut® platform
has both a galvanized and
• Will accept flexible cable ladder safety system
powder-coat finish to increase
the product lifespan in a
continuously wet environment.
Features:
• Galvanized and Powder-coated
finish for weather resistance
• Grip Strut® rest platforms
• Rest platforms cut to fit diameter of
existing storm drain
• 42" guardrails at each platform level
Project Description: Galvanized Access Stair and Ladder Project Description: Fixed Tank Access System
Industry: Utilities Industry: Oil and Gas
Application: Designed to provide stair access to a municipal Application: Designed to provide access to the inside of a
water treatment plant. storage tank for cleaning and preparation work.
Features: Features:
• Galvanized finish for weather resistance • Powder-coated steel construction
• Bar grating steps on the staircase • Grip Strut® walking surfaces for
• Heavy-duty channel and pipe constructed staircase maximum traction
• Non-slip rebar rungs on the fixed ladder • Swinging cantilever platform
can be locked in place
• Sliding aluminum ladder does
not contact inside of tank
19
CUSTOM Job Specific Access Solutions
ACCESS SOLUTIONS
JOB SPECIFIC
SYSTEMS
Project Description: Ladder for Off-Loading Trucks
Industry: Transportation-Trucking
Application: Improves worker
ergonomics and efficiency
when unloading trucks. Light
enough to hand-carry and
easy to set up.
Features:
Job Specific access solutions are designed • Self-adjusting feet for
for very unique circumstances in specialized uneven ground
applications or environments. Many times • Guardrail hooks over
these systems incorporate multiple custom truck bed
access solutions. If you have a difficult • Deep top step for
application, we can tailor a solution to standing room
• Grip Strut® steps are
address your needs.
self-cleaning
20
Unique Designs, Complete Safety
Project Description: Cooling Tower Access System Project Description: Under-floor Access Solution
Industry: Utilities Industry: General Industry
Application: Modular access system fits over cooling tower Application: Work basket extends below floor providing a
mouth providing a safe work surface during maintenance. comfortable position to reach pipes for maintenance and repair.
Features: Features:
• Grip Strut® platforms • Lift rings for movement by crane
• Platforms pin into position during use • Platform extension folds out increasing floor space
• Frame has adjustable mounts for flexible install • Guard rails around opening prevent fall hazard
• Perimeter guardrail and kick plate
21
CUSTOM Development Process
ACCESS SOLUTIONS
DESIGN
• Qualifies the application considering
safety, code compliance,
ergonomics and productivity
• Outlines the manufacturing process
Designers
• Develop concept and create 3D
renderings of the solution
• Customer evaluates design
• Revisions are made and final
design is approved
STEP 1
Engineered Design
drawings to your exact specifications.
DEVELOPMENT
Engineers
• Validate the design solution
• Perform a structural analysis
• Select materials
PROCESS
• Approve third-party components
• Detailed CAD drawings are
generated for customer approval
• Full production drawing package is
created for fabrication upon
customer approval
STEP 4
Fabrication
FA B R I C AT I O N
STEP 7
22
Taking Your Idea From Start To Finish
STEP 2 STEP 3
STEP 5 STEP 6
STEP 8 STEP 9
23
For Absolute Confidence At Height,
DBI-SALA Offers A Full-Line Of Fall Protection And Rescue Gear
Full Body Harnesses Shock Absorbing Anchorage Devices
• Distributes forces Lanyards • Superior 5,000 lb. strength
throughout body during • Limits fall arrest forces • Lightweight designs for
a fall to under 900 lbs. ease of use
• Maximum comfort, • High strength construction • Styles vary widely
freedom of movement and • Many configurations and to attach to almost
ease of use hook styles available for any structure
• Exhaustive designs and any application
configurations available to
suit any need
CUSTOM
ACCESS SOLUTIONS
Contact Us Today
Capital Safety – USA
3833 SALA Way, Red Wing, MN 55066-5005
Phone: 651-388-8282 • Toll Free: 800-328-6146 • Fax: 651-388-5065
Web Site: www.capitalsafety.com • Email: information@capitalsafety.com
Latin America: +1 651 385 4301 • Canada: 800 387 7484 • Asia: +65 6558 7758 • Australia: 1800 245 002
Germany: +49 2634 8052 • New Zealand: 0800 212 505 • Europe, Middle East, Africa: +33 (0)4 97 10 00 10
Northern Europe: +44 (0) 1928 571324