Beruflich Dokumente
Kultur Dokumente
D Low Input Bias and Offset Currents D Output Short-Circuit Protection D Low Total Harmonic
Distortion . . . 0.003% Typ
D D D D
High Input Impedance . . . JFET-Input Stage Latch-Up-Free Operation High Slew Rate . . . 13 V/s Typ Common-Mode Input Voltage Range Includes VCC+
description/ordering information
The TL08x JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset-voltage temperature coefficient. Offset adjustment and external compensation options are available within the TL08x family. The C-suffix devices are characterized for operation from 0C to 70C. The I-suffix devices are characterized for operation from 40C to 85C. The Q-suffix devices are characterized for operation from 40C to 125C. The M-suffix devices are characterized for operation over the full military temperature range of 55C to 125C. ORDERING INFORMATION
TJ VIOmax AT 255C PDIP (P) PDIP (N) PACKAGE Tube of 50 Tube of 50 Tube of 25 Tube of 75 Reel of 2500 Tube of 75 SOIC (D) 0C to 70C 15 mV SOP (PS) SOP (NS) Reel of 2500 Tube of 50 Reel of 2500 Reel of 2000 Reel of 2000 Reel of 2000 Tube of 150 Reel of 2000 TSSOP (PW) Tube of 90 Reel of 2000 ORDERABLE PART NUMBER TL081CP TL082CP TL084CN TL081CD TL081CDR TL082CD TL082CDR TL084CD TL084CDR TL081CPSR TL082CPSR TL084CNSR TL082CPW TL082CPWR TL084CPW TL084CPWR T084 T082 TL084C T081 T082 TL084 TL082C TL081C TOP-SIDE MARKING TL081CP TL082CP TL084CN
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2004, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
On products compliant to MILPRF38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
description/ordering information (continued)
ORDERING INFORMATION
TJ VIOmax AT 255C PDIP (P) PDIP (N) PACKAGE Tube of 50 Tube of 50 Tube of 25 Tube of 75 Reel of 2500 6 mV Tube of 75 SOIC (D) Reel of 2500 Tube of 50 Reel of 2500 0C to 70C SOP (PS) SOP (NS) PDIP (P) PDIP (N) Reel of 2000 Reel of 2000 Tube of 50 Tube of 50 Tube of 25 Tube of 75 3 mV SOIC (D) Reel of 2500 Tube of 75 Reel of 2500 Tube of 50 Reel of 2500 Tube of 50 PDIP (P) PDIP (N) Tube of 50 Tube of 25 Tube of 75 40C to 85C Reel of 2500 6 mV SOIC (D) Tube of 75 Reel of 2500 Tube of 50 Reel of 2500 TSSOP (PW) 40C to 125C 9 mV 9 mV 55C to 125C 6 mV SOIC (D) CDIP (J) LCCC (FK) CDIP (JG) Reel of 2000 Tube of 50 Reel of 2500 Tube of 25 Reel of 55 Tube of 50 ORDERABLE PART NUMBER TL081ACP TL082ACP TL084ACN TL081ACD TL081ACDR TL082ACD TL082ACDR TL084ACD TL084ACDR TL082ACPSR TL084ACNSR TL081BCP TL082BCP TL084BCN TL081BCD TL081BCDR TL082BCD TL082BCDR TL084BCD TL084BCDR TL081IP TL082IP TL084IN TL081ID TL081IDR TL082ID TL082IDR TL084ID TL084IDR TL082IPWR TL084QD TL084QDR TL084MJ TL084FK TL082MJG TL084QD TL084MJ TL084FK TL082MJG TL084I Z082 TL082I TL081I TL084BC TL081IP TL082IP TL081IN 082BC 081BC TL084AC T082A TL084A TL081BCP TL082BCP TL084BCN 082AC 081AC TOP-SIDE MARKING TL081ACP TL082ACP TL084ACN
LCCC (FK) Tube of 55 TL082MFK TL082MFK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
OFFSET N1 IN IN + VCC
1 2 3 4
8 7 6 5
1 2 3 4
8 7 6 5
NC No internal connection
1 2 3 4 5 6 7
14 13 12 11 10 9 8
NC 1OUT NC VCC+ NC
NC 1IN NC 1IN + NC
4 5 6 7 8
3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
NC 2OUT NC 2IN NC
4 5 6 7 8
3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
NC VCC NC 2IN + NC
NC No internal connection
symbols
OFFSET N1 IN + IN OFFSET N2
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
schematic (each amplifier)
VCC +
IN + 64 OUT 128 64 C1
IN
1080
OFFSET N2
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
TL08_C TL08_AC TL08_BC Supply voltage, VCC + (see Note 1) Supply voltage VCC (see Note 1) Differential input voltage, VID (see Note 2) Input voltage, VI (see Notes 1 and 3) Duration of output short circuit (see Note 4) Continuous total power dissipation Operating free-air temperature range, TA D package (8-pin) D package (14-pin) N package (14-pin) Package thermal impedance, JA (see Notes 5 and 6) NS package (14-pin) P package (8-pin) PS package (8-pin) PW package (8-pin) PW package (14-pin) Operating virtual junction temperature Case temperature for 60 seconds, TC Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds FK package J or JG package 0 to 70 97 86 76 80 85 95 149 113 150 113 150 150 150 260 300 C C C 85 95 18 18 30 15 Unlimited TL08_I 18 18 30 15 Unlimited 40 to 85 97 86 76 C/W TL084Q 18 18 30 15 Unlimited 40 to 125 TL08_M 18 18 30 15 Unlimited 55 to 125 C UNIT V V V V
Storage temperature range, Tstg 65 to 150 65 to 150 65 to 150 65 to 150 C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC + and VCC . 2. Differential voltages are at IN+ with respect to IN . 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. 5. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. 6. The package thermal impedance is calculated in accordance with JESD 51-7. DISSIPATION RATING TABLE PACKAGE D (14 pin) FK J JG TA 25C POWER RATING 680 mW 680 mW 680 mW 680 mW DERATING FACTOR 7.6 mW/C 11.0 mW/C 11.0 mW/ C 8.4 mW/C DERATE ABOVE TA 60C 88C 88C 69C TA = 70C POWER RATING 604 mW 680 mW 680 mW 672 mW TA = 85C POWER RATING 490 mW 680 mW 680 mW 546 mW TA = 125C POWER RATING 186 mW 273 mW 273 mW 210 mW
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFET-INPUT OPERATIONAL AMPLIFIERS SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
6 TEST CONDITIONS MIN VO = 0 Full range 20 18 5 2 30 10 11 12 12 10 25 15 3 1012 70 86 75 25 3 1012 86 75 200 50 200 12 10 12 12 13.5 12 13.5 12 12 10 50 25 3 1012 86 75 12 200 12 to 15 11 11 12 to 15 12 to 15 13.5 7 400 30 200 30 200 7 11 12 12 10 50 25 3 1012 86 MHz dB 12 200 V/mV Full range 25C 25C VIC = VICRmin, RS = 50 VO = 0, 25C VCC = 15 V to 9 V, VO = 0, RS = 50 25C 70 25C VO = 0, No load 86 12 to 15 13.5 V 2 2 30 200 5 100 5 100 18 18 18 5 100 10 200 20 7.5 5 Full range 25C Full range 25C Full range 25C RL = 10 k RL 10 k RL 2 k VO = 10 V, VO = 10 V, RL 2 k RL 2 k 25C Full range 25C VO = 0 RS = 50 RS = 50 25C 3 9 15 3 6 2 3 3 6 mV TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX TA UNIT TL081C TL082C TL084C TL081AC TL082AC TL084AC TLO81BC TL082BC TL084BC TL081I TL082I TL084I V/C pA nA pA nA V VO = 0 VO = 0 80 86 80 86 80 86 dB 1.4 2.8 1.4 2.8 1.4 2.8 1.4 2.8 mA
PARAMETER
VIO
VIO
IIO
IIB
VICR
VOM
AVD
B1
Unity-gain bandwidth
ri
Input resistance
CMRR
kSVR
ICC
VO1/ VO2 Crosstalk attenuation AVD = 100 25C 120 120 120 120 dB All characteristics are measured under open-loop conditions with zero common-mode voltage, unless otherwise specified. Full range for TA is 0C to 70C for TL08_C, TL08_AC, TL08_BC and 40C to 85C for TL08_I. Input bias currents of an FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive, as shown in Figure 17. Pulse techniques must be used that maintain the junction temperature as close to the ambient temperature as possible.
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
V/C pA nA pA nA V
VO = 0 VO = 0
VOM
Maximum peak output voltage swing Large-signal differential voltage amplification Unity-gain bandwidth Input resistance Common-mode rejection ratio Supply-voltage rejection ratio (VCC /VIO) Supply current (per amplifier)
AVD B1 ri CMRR
kSVR ICC
80
86
80
86
dB
1.4
2.8
1.4
2.8
mA
VO1/ VO2 Crosstalk attenuation AVD = 100 25C 120 120 dB All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. Input bias currents of a FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive, as shown in Figure 17. Pulse techniques must be used that maintain the junction temperatures as close to the ambient temperature as possible.
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
operating characteristics, VCC = 15 V, TA = 25C
PARAMETER SR tr Slew rate at unity gain Rise time Overshoot factor Vn In THD Equivalent input noise voltage Equivalent input noise current Total harmonic distortion VI = 20 mV, RS = 20 RS = 20 , VIrms = 6 V, f = 1 kHz VI = 10 V, TEST CONDITIONS RL = 2 k, RL = 2 k, f = 1 kHz f = 10 Hz to 10 kHz f = 1 kHz AVD = 1, RS 1 k, RL 2 k, CL = 100 pF, CL = 100 pF, See Figure 1 See Figure 1 MIN 8 TYP 13 0.05 20 18 4 0.01 0.003 MAX UNIT V/ s s % nV/Hz V pA/Hz %
OUT + VI
Figure 1
100 k C2 C1 500 pF IN
Figure 2
TL081 OUT
IN +
IN
N1 OUT
Figure 3
Figure 4
+ N1 100 k VCC
N2
1.5 k
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
VOM
Large-signal differential voltage amplification Differential voltage amplification Total power dissipation Supply current Input bias current Large-signal pulse response Output voltage Common-mode rejection ratio Equivalent input noise voltage Total harmonic distortion
12.5 10
VCC = 15 V
10
VCC = 10 V
7.5
VCC = 5 V
2.5
0 100
10 M
Figure 5
Figure 6
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
TYPICAL CHARACTERISTICS
MAXIMUM PEAK OUTPUT VOLTAGE vs FREQUENCY
15 VOM Maximum Peak Output Voltage V TA = 25C VOM Maximum Peak Output Voltage V VCC = 15 V RL = 2 k See Figure 2 15
12.5
12.5
10
RL = 10 kW RL = 2 kW
7.5
2.5
2.5
0 10 k
40 k 100 k
400 k
1M
4M
10 M
0 75 50
f Frequency Hz
TA Free-Air Temperature C
Figure 7
MAXIMUM PEAK OUTPUT VOLTAGE vs LOAD RESISTANCE
15 VOM Maximum Peak Output Voltage V VOM Maximum Peak Output Voltage V VCC = 15 V TA = 25C See Figure 2 15 RL = 10 k TA = 25C
Figure 8
MAXIMUM PEAK OUTPUT VOLTAGE vs SUPPLY VOLTAGE
12.5
12.5
10
10
7.5
7.5
2.5
2.5
0 0.1
Figure 9
Figure 10
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
10
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS
LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE
1000 700 400 AVD Large-Signal Differential Voltage Amplification V/mV 200 100 70 40 20 10 7 4 2 1 75 VCC = 15 V VO = 10 V RL = 2 k 50 25 0 25 50 75 100 125
TA Free-Air Temperature C
Figure 11
LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY
106 VCC = 5 V to 15 V RL = 10 k TA = 25C
104
103
45
90
101
135 180 10 M
Figure 12
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
Phase Shift
11
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
TYPICAL CHARACTERISTICS
DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY WITH FEED-FORWARD COMPENSATION
106 AVD Differential Voltage Amplification V/mV VCC = 15 V C2 = 3 pF TA = 25C See Figure 3 250 225 PD Total Power Dissipation mW 200 175 150 125 100 75 50 25 1 100 0 75 50 25 0 25 50 75 100 125 TL081 TL082, TL083 TL084, TL085 VCC = 15 V No Signal No Load
105
104
103
102
10
1k
10 k
100 k
1M
10 M
TA Free-Air Temperature C
Figure 13
SUPPLY CURRENT PER AMPLIFIER vs FREE-AIR TEMPERATURE
2.0 1.8 I CC Supply Current mA 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 75 VCC = 15 V No Signal No Load I CC Supply Current mA 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 50 25 0 25 50 75 100 125 0 0 2 4 TA = 25C No Signal No Load
Figure 14
SUPPLY CURRENT vs SUPPLY VOLTAGE
10
12
14
16
TA Free-Air Temperature C
Figure 15
Figure 16
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
12
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS
INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE
100 V CC = 15 V Input and Output Voltages V 4 Output 2 6
10
2 Input 4
0.1
0.01 50
Figure 17
OUTPUT VOLTAGE vs ELAPSED TIME
28 24 VO Output Voltage mV 20 16 12 8 4 0 4 0 0.2 0.4 0.6 0.8 1.0 1.2 t Elapsed Time s VCC = 15 V RL = 2 k CL = 100 pF TA = 25C See Figure 1 CMRR Common-Mode Rejection Ratio dB 89
Figure 18
COMMON-MODE REJECTION RATIO vs FREE-AIR TEMPERATURE
VCC = 15 V RL = 10 k
88
87
86
85
84
83 75
50
25
25
50
75
100
125
TA Free-Air Temperature C
Figure 19
Figure 20
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
13
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
TYPICAL CHARACTERISTICS
EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY
50 Vn Equilvalent Input Noise Voltage nV/ Hz VCC = 15 V AVD = 10 RS = 20 TA = 25C 1 0.4 THD Total Harmonic Distortion % VCC = 15 V AVD = 1 VI(RMS) = 6 V TA = 25C
40
0.1 0.04
30
20
0.01 0.004
10
0.001
10
400
1k
4k
10 k
40 k 100 k
f Frequency Hz
Figure 21
Figure 22
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
APPLICATION INFORMATION
RF = 100 k VCC + 15 V TL081 + CF = 3.3 F 1 k 15 V R3 3.3 k f= 1 2 RF CF 9.1 k C1 C2 3.3 k Output Input R1 C3 R2 TL081 + VCC R1 = R2 = 2(R3) = 1.5 M C1 = C2 = C3 = 110 pF 2 1 fo = = 1 kHz 2 R1 C1 Output
Figure 23
Figure 24
14
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
APPLICATION INFORMATION
1 M VCC + 1 F Input 100 k + VCC + TL084 + VCC + TL084 VCC + VCC + TL084 + Output C + Output B 1N4148 15 V 18 pF 18 pF VCC + 1/2 TL082 88.4 k 18 pF + VCC 88.4 k VCC+ 1/2 TL082 + VCC 1 k 15 V 88.4 k 1N4148 18 k (see Note A) 6 cos t 1 k 18 k (see Note A) Output A
100 F
100 k
15
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
APPLICATION INFORMATION
16 k 220 pF 43 k 43 k Input VCC +
1/4 TL084
30 k
220 pF
VCC + 43 k 43 k
1/4 TL084
220 pF
1.5 k
VCC
1.5 k VCC
VCC
16
1/4 TL084
43 k
Output B
VCC
www.ti.com
11-Apr-2013
PACKAGING INFORMATION
Orderable Device 5962-9851501Q2A Status
(1)
Eco Plan
(2)
Top-Side Markings
(4)
Samples
ACTIVE
TBD
Call TI
59629851501Q2A TL082MFKB 9851501QPA TL082M 59629851503Q2A TL084 MFKB 5962-9851503QC A TL084MJB 081AC 081AC 081AC 081AC 081AC 081AC
5962-9851501QPA 5962-9851503Q2A
ACTIVE ACTIVE
CDIP LCCC
JG FK
8 20
1 1
TBD TBD
A42 Call TI
5962-9851503QCA
ACTIVE
CDIP
14
TBD
Call TI
Call TI
-55 to 125
TL081ACD TL081ACDE4 TL081ACDG4 TL081ACDR TL081ACDRE4 TL081ACDRG4 TL081ACJG TL081ACP TL081ACPE4 TL081BCD TL081BCDE4 TL081BCDG4
ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE
SOIC SOIC SOIC SOIC SOIC SOIC CDIP PDIP PDIP SOIC SOIC SOIC
D D D D D D JG P P D D D
8 8 8 8 8 8 8 8 8 8 8 8
Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD Pb-Free (RoHS) Pb-Free (RoHS) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU
Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Call TI N / A for Pkg Type N / A for Pkg Type Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM
0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70
50 50 75 75 75
Addendum-Page 1
www.ti.com
11-Apr-2013
Orderable Device TL081BCDR TL081BCDRE4 TL081BCDRG4 TL081BCP TL081BCPE4 TL081CD TL081CDE4 TL081CDG4 TL081CDR TL081CDRE4 TL081CDRG4 TL081CP TL081CPE4 TL081CPSR TL081CPSRE4 TL081CPSRG4 TL081CPWLE TL081ID
Status
(1)
Package Type Package Pins Package Drawing Qty SOIC SOIC SOIC PDIP PDIP SOIC SOIC SOIC SOIC SOIC SOIC PDIP PDIP SO SO SO TSSOP SOIC D D D P P D D D D D D P P PS PS PS PW D 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 75 2500 2500 2500 50 50 75 75 75 2500 2500 2500 50 50 2000 2000 2000
Eco Plan
(2)
Lead/Ball Finish CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU
Top-Side Markings
(4)
Samples
ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE
Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Pb-Free (RoHS) Pb-Free (RoHS) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Pb-Free (RoHS) Pb-Free (RoHS) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD Green (RoHS & no Sb/Br)
Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM N / A for Pkg Type N / A for Pkg Type Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM N / A for Pkg Type N / A for Pkg Type Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Call TI Level-1-260C-UNLIM
081BC 081BC 081BC TL081BCP TL081BCP TL081C TL081C TL081C TL081C TL081C TL081C TL081CP TL081CP T081 T081 T081
TL081I
Addendum-Page 2
www.ti.com
11-Apr-2013
Orderable Device TL081IDE4 TL081IDG4 TL081IDR TL081IDRE4 TL081IDRG4 TL081IP TL081IPE4 TL081MFKB TL081MJG TL081MJGB TL082ACD TL082ACDE4 TL082ACDG4 TL082ACDR TL082ACDRE4 TL082ACDRG4 TL082ACP TL082ACPE4 TL082ACPSR
Status
(1)
Package Type Package Pins Package Drawing Qty SOIC SOIC SOIC SOIC SOIC PDIP PDIP LCCC CDIP CDIP SOIC SOIC SOIC SOIC SOIC SOIC PDIP PDIP SO D D D D D P P FK JG JG D D D D D D P P PS 8 8 8 8 8 8 8 20 8 8 8 8 8 8 8 8 8 8 8 75 75 75 2500 2500 2500 50 50 2000 75 75 2500 2500 2500 50 50
Eco Plan
(2)
Lead/Ball Finish CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI Call TI Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU
Op Temp (C) -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -55 to 125 -55 to 125 -55 to 125 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70
Top-Side Markings
(4)
Samples
ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE OBSOLETE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE
Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Pb-Free (RoHS) Pb-Free (RoHS) TBD TBD TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Pb-Free (RoHS) Pb-Free (RoHS) Green (RoHS & no Sb/Br)
Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM N / A for Pkg Type N / A for Pkg Type Call TI Call TI Call TI Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM N / A for Pkg Type N / A for Pkg Type Level-1-260C-UNLIM
Addendum-Page 3
www.ti.com
11-Apr-2013
Orderable Device TL082ACPSRE4 TL082ACPSRG4 TL082BCD TL082BCDE4 TL082BCDG4 TL082BCDR TL082BCDRE4 TL082BCDRG4 TL082BCP TL082BCPE4 TL082CD TL082CDE4 TL082CDG4 TL082CDR TL082CDRE4 TL082CDRG4 TL082CJG TL082CP
Status
(1)
Package Type Package Pins Package Drawing Qty SO SO SOIC SOIC SOIC SOIC SOIC SOIC PDIP PDIP SOIC SOIC SOIC SOIC SOIC SOIC CDIP PDIP PS PS D D D D D D P P D D D D D D JG P 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 50 2000 2000 75 75 75 2500 2500 2500 50 50 75 75 75 2500 2500 2500
Eco Plan
(2)
Lead/Ball Finish CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU
Op Temp (C) 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70
Top-Side Markings
(4)
Samples
ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE
Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Pb-Free (RoHS) Pb-Free (RoHS) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD Pb-Free (RoHS)
Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM N / A for Pkg Type N / A for Pkg Type Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Call TI N / A for Pkg Type
T082A T082A 082BC 082BC 082BC 082BC 082BC 082BC TL082BCP TL082BCP TL082C TL082C TL082C TL082C TL082C TL082C
TL082CP
Addendum-Page 4
www.ti.com
11-Apr-2013
Orderable Device TL082CPE4 TL082CPSR TL082CPSRG4 TL082CPW TL082CPWE4 TL082CPWG4 TL082CPWLE TL082CPWR TL082CPWRE4 TL082CPWRG4 TL082ID TL082IDE4 TL082IDG4 TL082IDR TL082IDRE4 TL082IDRG4 TL082IJG TL082IP TL082IPE4
Status
(1)
Package Type Package Pins Package Drawing Qty PDIP SO SO TSSOP TSSOP TSSOP TSSOP TSSOP TSSOP TSSOP SOIC SOIC SOIC SOIC SOIC SOIC CDIP PDIP PDIP P PS PS PW PW PW PW PW PW PW D D D D D D JG P P 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 50 50 2000 2000 2000 75 75 75 2500 2500 2500 50 2000 2000 150 150 150
Eco Plan
(2)
Lead/Ball Finish CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU
Op Temp (C) 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85
Top-Side Markings
(4)
Samples
ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE
Pb-Free (RoHS) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD Pb-Free (RoHS) Pb-Free (RoHS)
N / A for Pkg Type Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Call TI Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Call TI N / A for Pkg Type N / A for Pkg Type
TL082IP TL082IP
Addendum-Page 5
www.ti.com
11-Apr-2013
Status
(1)
Package Type Package Pins Package Drawing Qty TSSOP TSSOP TSSOP LCCC LCCC PW PW PW FK FK 8 8 8 20 20 1 2000 2000 2000
Eco Plan
(2)
Top-Side Markings
(4)
Samples
Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD TBD
59629851501Q2A TL082MFKB TL082MJG 9851501QPA TL082M TL084AC TL084AC TL084AC TL084AC TL084AC TL084AC TL084ACN TL084ACN TL084A TL084A TL084A
TL082MJG TL082MJGB TL084ACD TL084ACDE4 TL084ACDG4 TL084ACDR TL084ACDRE4 TL084ACDRG4 TL084ACN TL084ACNE4 TL084ACNSR TL084ACNSRE4 TL084ACNSRG4
ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE
CDIP CDIP SOIC SOIC SOIC SOIC SOIC SOIC PDIP PDIP SO SO SO
JG JG D D D D D D N N NS NS NS
8 8 14 14 14 14 14 14 14 14 14 14 14
TBD TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Pb-Free (RoHS) Pb-Free (RoHS) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
A42 A42 CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU
N / A for Pkg Type N / A for Pkg Type Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM N / A for Pkg Type N / A for Pkg Type Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM
Addendum-Page 6
www.ti.com
11-Apr-2013
Orderable Device TL084BCD TL084BCDE4 TL084BCDG4 TL084BCDR TL084BCDRE4 TL084BCDRG4 TL084BCN TL084BCNE4 TL084CD TL084CDE4 TL084CDG4 TL084CDR TL084CDRE4 TL084CDRG4 TL084CJ TL084CN TL084CNE4 TL084CNSLE TL084CNSR
Status
(1)
Package Type Package Pins Package Drawing Qty SOIC SOIC SOIC SOIC SOIC SOIC PDIP PDIP SOIC SOIC SOIC SOIC SOIC SOIC CDIP PDIP PDIP SO SO D D D D D D N N D D D D D D J N N NS NS 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 2000 25 25 50 50 50 2500 2500 2500 25 25 50 50 50 2500 2500 2500
Eco Plan
(2)
Lead/Ball Finish CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU Call TI CU NIPDAU
Op Temp (C) 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70
Top-Side Markings
(4)
Samples
ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE OBSOLETE ACTIVE
Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Pb-Free (RoHS) Pb-Free (RoHS) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD Pb-Free (RoHS) Pb-Free (RoHS) TBD Green (RoHS & no Sb/Br)
Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM N / A for Pkg Type N / A for Pkg Type Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Call TI N / A for Pkg Type N / A for Pkg Type Call TI Level-1-260C-UNLIM
TL084BC TL084BC TL084BC TL084BC TL084BC TL084BC TL084BCN TL084BCN TL084C TL084C TL084C TL084C TL084C TL084C
TL084CN TL084CN
TL084
Addendum-Page 7
www.ti.com
11-Apr-2013
Orderable Device TL084CNSRG4 TL084CPW TL084CPWE4 TL084CPWG4 TL084CPWLE TL084CPWR TL084CPWRE4 TL084CPWRG4 TL084ID TL084IDE4 TL084IDG4 TL084IDR TL084IDRE4 TL084IDRG4 TL084IJ TL084IN TL084INE4 TL084MFK TL084MFKB
Status
(1)
Package Type Package Pins Package Drawing Qty SO TSSOP TSSOP TSSOP TSSOP TSSOP TSSOP TSSOP SOIC SOIC SOIC SOIC SOIC SOIC CDIP PDIP PDIP LCCC LCCC NS PW PW PW PW PW PW PW D D D D D D J N N FK FK 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 20 20 25 25 1 1 2000 2000 2000 50 50 50 2500 2500 2500 2000 90 90 90
Eco Plan
(2)
Lead/Ball Finish CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU POST-PLATE POST-PLATE
Op Temp (C) 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -55 to 125 -55 to 125
Top-Side Markings
(4)
Samples
ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE
Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD Pb-Free (RoHS) Pb-Free (RoHS) TBD TBD
Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Call TI Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Call TI N / A for Pkg Type N / A for Pkg Type N / A for Pkg Type N / A for Pkg Type
Addendum-Page 8
www.ti.com
11-Apr-2013
Orderable Device
Status
(1)
Eco Plan
(2)
Lead/Ball Finish
Op Temp (C)
Top-Side Markings
(4)
Samples
TL084 MFKB TL084MJ TL084MJB ACTIVE ACTIVE CDIP CDIP J J 14 14 1 1 TBD TBD A42 A42 N / A for Pkg Type N / A for Pkg Type -55 to 125 -55 to 125 TL084MJ 5962-9851503QC A TL084MJB TL084Q TL084Q TL084Q TL084Q
D D D D
14 14 14 14
50 50 2500 2500
Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
(1)
The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Addendum-Page 9
www.ti.com
11-Apr-2013
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TL082, TL082M, TL084, TL084M :
Catalog - TI's standard catalog product Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Military - QML certified for Military and Defense Applications
Addendum-Page 10
Device
Package Package Pins Type Drawing SOIC SOIC SOIC SO SOIC SOIC SOIC SO SOIC SOIC TSSOP SOIC SOIC TSSOP SOIC SOIC SO SOIC D D D PS D D D PS D D PW D D PW D D NS D 8 8 8 8 8 8 8 8 8 8 8 8 8 8 14 14 14 14
SPQ
Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 12.4 12.4 12.4 16.4 12.4 12.4 12.4 16.4 12.4 12.4 12.4 12.4 12.4 12.4 16.4 16.4 16.4 16.4 6.4 6.4 6.4 8.2 6.4 6.4 6.4 8.2 6.4 6.4 7.0 6.4 6.4 7.0 6.5 6.5 8.2 6.5
B0 (mm) 5.2 5.2 5.2 6.6 5.2 5.2 5.2 6.6 5.2 5.2 3.6 5.2 5.2 3.6 9.0 9.0 10.5 9.0
K0 (mm) 2.1 2.1 2.1 2.5 2.1 2.1 2.1 2.5 2.1 2.1 1.6 2.1 2.1 1.6 2.1 2.1 2.5 2.1
P1 (mm) 8.0 8.0 8.0 12.0 8.0 8.0 8.0 12.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 12.0 8.0
W Pin1 (mm) Quadrant 12.0 12.0 12.0 16.0 12.0 12.0 12.0 16.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1
TL081ACDR TL081BCDR TL081CDR TL081CPSR TL081IDR TL082ACDR TL082ACDR TL082ACPSR TL082BCDR TL082CDR TL082CPWR TL082IDR TL082IDR TL082IPWR TL084ACDR TL084ACDR TL084ACNSR TL084BCDR
2500 2500 2500 2000 2500 2500 2500 2000 2500 2500 2000 2500 2500 2000 2500 2500 2000 2500
Pack Materials-Page 1
Device
Package Package Pins Type Drawing SOIC SOIC TSSOP SOIC SOIC SOIC D D PW D D D 14 14 14 14 14 14
SPQ
Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 330.0 330.0 330.0 330.0 330.0 330.0 16.4 16.4 12.4 16.4 16.4 16.4 6.5 6.5 6.9 6.5 6.5 6.5
Device TL081ACDR TL081BCDR TL081CDR TL081CPSR TL081IDR TL082ACDR TL082ACDR TL082ACPSR TL082BCDR TL082CDR TL082CPWR
Package Type SOIC SOIC SOIC SO SOIC SOIC SOIC SO SOIC SOIC TSSOP
Package Drawing D D D PS D D D PS D D PW
Pins 8 8 8 8 8 8 8 8 8 8 8
SPQ 2500 2500 2500 2000 2500 2500 2500 2000 2500 2500 2000
Length (mm) 340.5 340.5 340.5 367.0 340.5 340.5 367.0 367.0 340.5 367.0 367.0
Width (mm) 338.1 338.1 338.1 367.0 338.1 338.1 367.0 367.0 338.1 367.0 367.0
Height (mm) 20.6 20.6 20.6 38.0 20.6 20.6 35.0 38.0 20.6 35.0 35.0
Pack Materials-Page 2
Device TL082IDR TL082IDR TL082IPWR TL084ACDR TL084ACDR TL084ACNSR TL084BCDR TL084CDR TL084CDRG4 TL084CPWR TL084IDR TL084QDR TL084QDRG4
Package Type SOIC SOIC TSSOP SOIC SOIC SO SOIC SOIC SOIC TSSOP SOIC SOIC SOIC
Package Drawing D D PW D D NS D D D PW D D D
Pins 8 8 8 14 14 14 14 14 14 14 14 14 14
SPQ 2500 2500 2000 2500 2500 2000 2500 2500 2500 2000 2500 2500 2500
Length (mm) 340.5 367.0 367.0 367.0 333.2 367.0 333.2 333.2 333.2 367.0 333.2 367.0 367.0
Width (mm) 338.1 367.0 367.0 367.0 345.9 367.0 345.9 345.9 345.9 367.0 345.9 367.0 367.0
Height (mm) 20.6 35.0 35.0 38.0 28.6 38.0 28.6 28.6 28.6 35.0 28.6 38.0 38.0
Pack Materials-Page 3
MECHANICAL DATA
MCER001A JANUARY 1995 REVISED JANUARY 1997
JG (R-GDIP-T8)
0.400 (10,16) 0.355 (9,00) 8 5
CERAMIC DUAL-IN-LINE
0.023 (0,58) 0.015 (0,38) 0.100 (2,54) 0.014 (0,36) 0.008 (0,20)
015
4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as components) are sold subject to TIs terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TIs terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TIs goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or enhanced plastic are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Audio Amplifiers Data Converters DLP Products DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID OMAP Applications Processors Wireless Connectivity www.ti.com/audio amplifier.ti.com dataconverter.ti.com www.dlp.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/omap TI E2E Community e2e.ti.com www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright 2013, Texas Instruments Incorporated Applications Automotive and Transportation Communications and Telecom Computers and Peripherals Consumer Electronics Energy and Lighting Industrial Medical Security Space, Avionics and Defense Video and Imaging www.ti.com/automotive www.ti.com/communications www.ti.com/computers www.ti.com/consumer-apps www.ti.com/energy www.ti.com/industrial www.ti.com/medical www.ti.com/security www.ti.com/space-avionics-defense www.ti.com/video