Beruflich Dokumente
Kultur Dokumente
Over 4 years of experience in Embedded systems Design and trouble shooting of Electronic Circuits.
Windows, DOS, Red Hat Linux Pascal, C, C++, Visual Basic Dynamic C, Keil V7.06 Atmel 89C51, Rabbit 2000, Arm AT91M55800A Pads powerlogic, Orcad 9.2, CAM350, Gerbtool
Celetronix India PVT LTD (May 2001-till date) Electronics corporation of India LTD. [ECIT-ECIL] Transworks information services. BARC Trombay (trainee). NIIT Bhayender (Faculty).
Presently working as Design Engineer. Projects Handled: 1 Alarm Annunciator Monitoring of Vital process parameters where a change of state can occur. Provide visual and audio warning of fault condition. Record time and date of occurrence, acceptance and clearance of fault. Serial communication between PC and Annunciator. Storage of logged data as a text file on the pc. Hardware used: Jack Rabbit (BL 1810) board, field contacts, Buzzer, LEDs. Software used: Dynamic C V-7.26P. 2 Embedded TCP/IP Stack development. Simple TCP/IP stack development over a Linux environment. Implementation of Ethernet, ARP, IP, TCP and UDP headers for stack. Socket programming used at application layer. Implementation of software checksum.
Hardware Used: Jack Rabbit (RCM 2200) Development board, x86 based machine, Hub, Ethernet card, UTP cables. Software Used: GCC, Dynamic C V7.26SE 3 Temperature Monitoring System. Edit real time and date. Read time and date and store it on serial EEPROM. Display temperature, and date on PC and LCD. Software Interrupt based triggering for max-min temperature values. 4 Other Hardware & Software projects . Design of DDR-SDRAM Burn-in board. Design of automated Power Transformer coil winder. Design of SMPS tester (Automatic debugger) for Echostar satellite Receiver. I have worked on World Class SMPS designs (Resonant topology with boost and doubler Circuits). Also worked on SMPS with PFC topology. Working on Smart card readers (HID) Maxiprox and Proxpoint. I have worked on ClassAB, ClassD Amplifiers (Mitek). Also I have worked on Echostar Satellite receivers (DTH). I have also worked on Set Top Box. (C.A.S).
Training in BARC
I had in plant training in Instrumentation department of BARC (Bhabha Atomic Research center RSMD Cirus). In BARC I have worked on following projects. 1. Making of Pseudo Random Binary Sequence Generator 2. Design of different types of active filters (B.A.R.C).
N.I.I.T (Bhayender)
I have also worked in N.I.I.T as a Faculty member teaching MSoffice, programming software and other application software packages. References: 1.Mr. Kallol Roy (M Tech, PHD Control SYS) BARC (R .S. M. D Cirus Reactor) 2. Mr. R. K. Jain, Electronic Division, BARC. 3. Mr. Kalyanaraman (A.G.M in Celetron India). 4. Mr. Devinder Singh (G.M Design Center in Celetron India). 5. Mr. R. S. Sawant, Center Manager, ECIT Matunga.
Hobbies: