Sie sind auf Seite 1von 7

Barloz Medium Freighter

Upgrades: Total Cost = 193,400 credits


Installation Procedure: Renting a basic hanger to work on upgrades and repairs in cost
normal docking fees, normally 50 to 100cr a day. Renting a dry dock slip for a small space transport
cost 200cr a day. Specialized upgrade tools cost 500cr and are readily available at most starports. A
skilled laborer to work on the upgrade cost 15cr an hour. No upgrade may be taken more than once
unless noted as such in its description.

Power Core/Hyper drive:


1. Systematic engine upgrade and tuning: 10,000cr. +1 speed in space, +200kph
atmospheric. Most CEC ships use a Nova Quad drive system or something similar for sub
light travel that comes from the factory with reliable but unimpressive performance.
Aftermarket parts and tuning can be used to greatly enhance the performance of these
drive engines. Less than one thing, this kit represents hundreds of small jobs. Requires
specialized tools and 320 person-hours to install. (Labor=4,800)(Dry dock
space=8,000)(Tools=500)(Parts=10,000) Installed

2. Enhanced Hyper drive Package: 15,000cr. Improves the hyper drive modifier from x2 to
x1. Consisting of replacements for many of the stock hyper drive parts, navcomputer
software and a new hyper drive core this package is the most popular CEC makes but is
expensive and difficult to install and calibrate. Requires specialized tools and 120 person-
hours to install. (Labor=1,800)(Dry dock=3,000)(Tools=500)(Parts=15,000) Installed

3. Aftermarket stabilizers and maneuvering system: 12,000cr. +4 dexterity. A YT-1300 is a


sluggish ship with only basic repuslorlifts and maneuvering thrusters. By adding secondary
ion thrusters to the outer hull at twelve points and installing a dedicated processor for sub
light maneuvering it is possible to considerably increase the ships capability to change
course. Requires specialized tools and 200 person-hours to install. (Labor=3,000)(Dry
dock=5,000)(Tools=500)(Parts=12,000) Installed
Shields/Sensors:
1. SoroSuub Duplex Shield Enhancement Kit: 6000cr. Adds 25 shield points to an existing
shield generator. Better computer management, military style emitters and vary high
quality superconductors allow for much greater performance, putting the normal shields of
an upgraded craft on a par with light patrol craft. Requires specialized tools and 160
person hours to install. (Labor=2,400)(Dry dock=4,000)(Tools=500)(Parts=6,000)
Installed

2. CEC Guardian shield generator/emitter array.: 5000cr. Provides 25 shield points. The YT-
1300 has built in equipment slot and attachment points for this shield generator, and most
CEC ships can accept it with little or no modification. Most captains make this upgrade
their first goal and several have been known to wonder out loud why CEC makes this an
aftermarket kit rather than a standard option. Requires basic tools and 40 person-hours to
install. (Labor=600)(Dry dock=1,000)(Parts=5,000) Installed

3. Kaut Drive Yards MV-12 Antiscan system: 40,000cr. Availability Illegal.


Unknown in most places, this complex and expensive device makes it very difficult to
locate the ship with normal sensor systems. -10 to perception checks to detect the vessel
it is mounted on. (Labor=4,800)(Dry dock=8,000)(Tools=500)(Parts=40,000) Installed

4. CEC Lifesaver damage control and auxiliary armor: 4000cr. Adds 30 hit points. A cheap
upgrade that mostly consist of installing better damage control software and following the
structural reinforcement plans in the kit using the supplied combat-grade durasteel. Time
consuming to install, but it doesn't require any special facilities. Requires basic tools and
120 person hours to install. May be taken twice. (Labor=1,800)(Dry
dock=3,000)(Parts=4,000) Installed
Communications/Computing:
1. CEC Set 4 Subspace Communicator with Integrated Comm system: 4000cr.
The communication system built into a stock YT-1300, the set 4 is a communication
system with a 1000 kilometer range combined with a subspace transceiver able to send
and receive FTL messages over a several parsec range. With basic video, audio and data
feeds and the ability to maintain 20 connections simultaneously. Installed

2. Improved Communications System: 1200cr.


The Set 4+ system is a set of add on systems for the CEC Set 4. Boosting the range of the
basic commutation to 4000km and more then redoubling the range of the subspace
communication unit. Additionally it can maintain 15 more connections and handle
holographic data. +5 to all Computer Use checks involving communications.
(Labor=600)(Dry dock=1,000)(Parts=1,200) Installed

3. SoroSuub Ei-C64 Integrated computing system: 7000cr. +4 intelligence. The baseline


computers for the YT-1300 were chosen for reliability, low power requirements and to be
up to the task of a simple cargo hauler. Many ships require more advanced data
preprocessing systems for task ranging from business administration to target motion
prediction programs, a need SoroSuub addresses with its business class Ei-C64. Requires
160 person hours to install. Note; Requires a DC 20 Computer Use check rather than a
Mechanics check to finish installation. (Labor=2,400)(Dry dock=4,000)(Parts=7,000)
Installed

4. SoroSuub ER-Hypercom: 10,000cr.


This hypertranceiver is uncommon among civilian ships due to the high cost and little
utility of such a powerful communications tool. Many consider such a device on a freighter
to be proof that a spy is about. (Labor=2,400)(Dry dock=4,000)(Parts=10,000)
Installed
Aesthetics/Miscellaneous:
1. Improves Accommodation's: 2500cr. This upgrade consist of dozens of things like
aesthetics upgrades, more conformable bed and couches, a view screen in the lounge able
to play any data in the ship's memory or read from a datacard, a more advanced Auto
Chef, as well as a tiny galley where fresh food may be prepared. Freshers are more
conformable and include a small clothes washer/dryer. As part of the cost of this upgrade
package the ship may be painted any color the owner desires, inside and out. Requires
basic tools and 120 person-hours to install. (Labor=1,800)(Dry
dock=3,000)(Parts=2,500) Installed

2. Install Bulkhead Door system on all three levels – Installed

3. Install Fighter Docking Cradle – Installed

4. Install Smuggling 4 Compartments – Installed

5. Convert mid-level storage rooms into passenger areas - Installed


Weapons:
1. Replace existing Turret: Taim & Bak DX9 Quad Laser Cannon: 8500cr. Availability Military.
6d10x2. Range as laser cannon. Auto fire. Four 2cm laser cannons set to fire in alternating
pairs or sequentially, this heavy mount is used as a flack battery on some warships and on
some freighters in areas with heavy piracy. (Labor=2,400)(Dry
dock=4,000)(Tools=500)(Parts=8,500) Installed

2. Comar F-4 Medium Ion Cannon 3000cr. Availability Military.


5d10x2 ion damage. Range as Ion Cannon. This Comar ion weapon allows a YT-1300 to
mount a powerful weapon that can debilitate other ships without destroying them. The
Comar F-4 draws a dangerous amount of attention however, as it's considered a pirate's
gun. (Labor=2,400)(Dry dock=4,000)(Tools=500)(Parts=3,000) Installed

3. Arakyd Flex Tube Proton Torpedo Launcher: 2500cr. Availability Military. Rare.
9d10x2, 4 square splash. Range as Missile. This heavy launcher has a deep, sixteen space
magazine and is intended for light warships. When not illegal for civilian ownership Arakyd
only sells them wholesale to shipbuilders. Does not include torpedoes. (Labor=2,400)(Dry
dock=4,000)(Tools=500)(Parts=2,500) Installed
Compartments:
1. Medical Bay - Install Med bay between bathrooms (Mid-level) - A passenger cabin may be
switched out for a medical bay with a surgical table/bed, medical scanners and sterilizer
fields, as well as a sink, cold storage compartment and cabinets to store medical supplies.
There is enough space in the medical bay to store a medical droid and bacta tank but
neither are included in the cost. Provides a +5 bonus to Treat Injury checks. and requires
specialized tools and 120 person-hours to install. Installed

2. Add Bacta Tank (Installed)

3. Engineering Bay - Install Engineering Bay to Portside Cargo Bay(Mid-level) – Installed

4. Administrative Office - Install Business Office between Bathrooms (Mid-level) – Installed

5. Crew Lounge and Dejarik table – Install buttressing Office and Medbay (Mid-level) –
Installed
External:

1. Cargo lift doors to allow for air speeder/fighter load and launch - Installed

2. Take out Portside Airlock and make into customizable hardpoint - Installed

Das könnte Ihnen auch gefallen