Beruflich Dokumente
Kultur Dokumente
------------------------
HOW TO USE THIS DOCUMENT
------------------------
--------
CONTENTS
--------
With Internet connection sharing, the computers in your home network are
used as follows:
When a computer on your network sends a request to the Internet, its private
IP address is transmitted to the Connection Sharing computer. The Connection
Sharing computer translates that private IP address to the IP address of the
Connection Sharing computer, and then sends it on to the Internet. When the
results are returned, the Connection Sharing computer translates the IP
address back again and routes it to the correct computer on your network.
System Requirements
-------------------
Before starting the Browser Connection Setup wizard, make sure that the
following conditions are met:
To start the Browser Connection Setup wizard for the first time:
1. Insert the floppy disk you made when you installed Microsoft
Internet Connection Sharing on your Connection Sharing computer into
your floppy disk drive.
2. Click the Start button, and then click Run.
3. Type:
a:\icsclset.exe
If you want to access the Internet by using your local area network
(LAN) through the Connection Sharing computer, you must have a network
adapter installed that is bound to the Microsoft TCP/IP protocol.
NOTE: Currently, the Browser Connection Setup wizard does not automatically
install the TCP/IP protocol for network adapters.
TCP/IP Settings
---------------
NOTE: These changes require restarting your computer for changes to take
effect. When you are finished, the computer will restart.