Beruflich Dokumente
Kultur Dokumente
Siemens Industry Online Support This entry is from the Siemens Industry Online Support. The following link takes you directly to the download page of this document: http://support.automation.siemens.com/WW/view/en/61507590
Caution: The functions and solutions described in this entry are mainly limited to the implementation of the automation task. In addition, please note that suitable security measures in compliance with the applicable Industrial Security standards must be taken if your system is interconnected with other parts of the plant, the company's network or the Internet. For further information on this issue, please refer to Entry ID 50203404. http://support.automation.siemens.com/WW/view/en/50203404
For further information on this topic, you may also actively use our Technical Forum in the Siemens Industry Online Support. Add your questions, suggestions and problems and discuss them in our large forum community:
Copyright Siemens AG 2012 All rights reserved
http://www.siemens.com/forum-applications
s
Auf dieser Seite wird das "Handbuchinhaltsverzeichnis" eingefgt.
1 2 3 4 5 6
General Notes
Literature
History
Operating Manual
We do not accept any liability for the information contained in this document. Any claims against us based on whatever legal reason resulting from the use of the examples, information, programs, engineering and performance data etc., described in this Application Example shall be excluded. Such an exclusion shall not apply in the case of mandatory liability, e.g. under the German Product Liability Act (Produkthaftungsgesetz), in case of intent, gross negligence, or injury of life, body or health, guarantee for the quality of a product, fraudulent concealment of a deficiency or breach of a condition which goes to the root of the contract (wesentliche Vertragspflichten). However, claims arising from a breach of a condition which goes to the root of the contract shall be limited to the foreseeable damage which is intrinsic to the contract, unless caused by intent or gross negligence or based on mandatory liability for injury of life, body or health. The above provisions do not imply a change in the burden of proof to your disadvantage.
It is not permissible to transfer or copy these Application Examples or excerpts thereof without express authorization from Siemens Industry Sector.
Table of contents
Table of contents
Warranty and Liability ................................................................................................. 4 1 Starting up the Application............................................................................... 6 1.1 1.2 2 Preparation........................................................................................... 6 Commissioning..................................................................................... 6
Operation of the Application ............................................................................ 7 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Overview .............................................................................................. 7 Create a new project ............................................................................ 7 Procedure............................................................................................. 7 Open an existing project....................................................................... 8 Find a project on the hard disk and open it .......................................... 8 Remove a project ................................................................................. 9 Create a device .................................................................................... 9 Remove a device................................................................................ 11 Procedure........................................................................................... 11 Configuration of the label strip ........................................................... 11 Open the configuration window.......................................................... 11 Configuration of the label strip ........................................................... 12 Export the label strips......................................................................... 12
4 5 6
1
1.1
Table 1-1 No. 1 2
Action Download the file SIMATIC_HMI_Label_Creator.zip". Unzip the zip-archive into a local directory.
1.2
Table 1-2 No.
Copyright Siemens AG 2012 All rights reserved
Commissioning
Note
In order to start the SIMATIC HMI Creator, .NET-Framework version 3.5 or higher has to be installed on the computer. (It is already on the computer, if the TIA portal has been installed).
2
2.1
Start screen
2.2
Procedure
5.
2.3
4.
5.
2.4
Procedure
Remove a project
Table 2-3 No. 1. 2. 3. Steps Select a project from the Recent projects list. Click on Remove to remove the project. If you really want to remove the project, click on the Yes button. If, during the removal, the project folder cannot be found any more, you can remove the project from the Recent Projects list. Please also confirm with the "Yes" button. Note
Note
2.5
Procedure
Create a device
Table 2-4 No. 1. Action Open a project as described in the chapter Open an existing project or create a new project as described in the chapter Create a new project. Then click on the Add button. The window Add Device will open up. Note
2.
4.
Copyright Siemens AG 2012 All rights reserved
Enter a name for the device you want to create in the Name box. Click on OK to confirm the operating device.
5.
Figure 2-3
10
2.6
Procedure
Remove a device
Table 2-5 No. 1. 2. 3. Steps Select a device from the list of all devices that have been created. Click on Remove to remove the device. If you really want to remove the device, please click on the Yes button.
Note
Copyright Siemens AG 2012 All rights reserved
2.7
11
2 Operation of the Application 2.7 Configuration of the label strip When you exit the configuration window, all the changes will be saved automatically.
Note
2.
3.
The graphics preview is displayed directly on the respective operating key of the operating device.
4.
In the boxes Title and Additional text, you can enter any text and mark the label strips additionally.
2.
Note
Please make sure to export the label strip as a .png file if you wish to print the label strip on a film. Otherwise, the transparent effect of the file will get lost, and a background might be printed on the film. By default, the dialog is set in such a way that the label strips are saved as .png files.
12
3
Procedure
Table 3-1 No. 1.
Steps Open the file you have exported by means of Window Photo Viewer or Windows Image and Fax Viewer
Screenshot
2.
Copyright Siemens AG 2012 All rights reserved
Press the Print button to start the assistant for printing pictures.
3.
4.
13
4 General Notes
General Notes
Table 4-1 No. 1. 2. 3. Note For creating label strips, please use transparent films or paper with a thickness min. 0.13 mm, max. 0.16 mm. If required, punch the holes for LEDs from the paper strip after printing so that the LEDs remain visible in the function keys. Protect the marking against abrasion by means of a transparent adhesive tape (please observe max. thickness) or a special fixating spray (available in specialized IT stores).
4.
The label strips should not be too loose, since they could leave their correct position due to vibrations. Sometimes it will be necessary to secure the label strip in place with an adhesive tape.
It is easier to insert the label strips if the edges have been rounded a bit.
5.
Copyright Siemens AG 2012 All rights reserved
14
5 Literature
Literature
The following list is by no means complete and only provides a selection of appropriate sources.
Table 5-1 Topic \1\ \2\ \3\ \4\ Reference to this entry Siemens Industry Online Support SIMATIC Analyser E-mail notification with the SIMATIC HMI Comfort Panel Printing with the SIMATIC Comfort Panel Title
http://support.automation.siemens.com/WW/view/en/61507590 http://support.automation.siemens.com http://support.automation.siemens.com/WW/view/en/38645769 http://support.automation.siemens.com/WW/view/en/59556540
Internet links
\5\
http://support.automation.siemens.com/WW/view/en/58205602
History
Table 6-1 Version V2.0 Date 07/2012 First issue Change
15