Sie sind auf Seite 1von 10

POROUS ELEMENTS STAINLESS STEEL PORAL

FILTRATION EFFICIENCY FOR LIQUID FILTRATION EFFICIENCY FOR GAS

SINTERTECH

PORAL GRADE 98 % particules stopped (m) 99,9% particules stopped (m)

3 5 3,2 5,9 4,5 9

7 12 16

10 15 20 30 40 16 26 40 60 90 24 37 58 90 130

PORAL GRADE 3 5 7 10 15 20 30 40 98 % particules stopped (m) 0,2 0,4 0,7 1,2 2 3,2 5 8 99,9 % particules stopped (m) 0,5 1,2 2,3 3,6 6 8,6 13 20
This table has been obtained by: Separation of dry dust in a flow of 10l/hr/sq.cm.

This table has been obtained by: Water separation test according to ISO 4572.

FLOW RATE OF LIQUID (WATER)

FLOW RATE OF GAS (AIR)


30 20 15 10 07

10 5 2 1 0,5 0,3 0,2 0,1

Grade

40

05

PORAL STAINLESS STEEL Flow rate of water at 20C (viscosity 1 centipoise)


liters/hr/sq.cm

Graphics Use : The pressure P1 is proportional to the viscosity 1 of the gas passing through the media and to the filter thickness.

03

P 1 183 e

pressure drop read on the chart (in millibar) viscosity of the gas (in micropoise) at use temperature air viscosity at 20C (in micropoise) thickness of the filter (in mm)

Nota: The calculation of the pressure drop of the flow to be used is the actual flow V1

0,5

Pressure drop (cm W.G.) per mm filter thickness

10

20 30

50

100

V gas volume at 0C (in liters) under a one bar absolute pressure t 1 gas temperature (inC) P absolute pressure of the gas (in bar)

300 200 100 50

Grade

40

30

20

15

10

07 05

Graphics Use : The pressure P 1 is proportional to the viscosity liquid passing through the media and to the filter thickness.

of the

03

20 10
P 1 e pressure drop read on the chart (in millibar) viscosity of the liquid (in centipoise) at use temperature water viscosity at 20C (in centipoise) thickness of the filter (in mm) PORAL STAINLESS STEEL Flow rate at 20C (viscosity 183 micropoises) liters/hr/sq.cm

5 3 2 1 0,5 1 2 3 5 10 20 30 50 100

Pressure drop (cm W.G.) per mm filter thickness

2009 Federal-Mogul Sintertech SAS

POROUS ELEMENTS BRONZE PORAL


FILTRATION EFFICIENCY FOR LIQUID FILTRATION EFFICIENCY FOR GAS

SINTERTECH

PORAL GRADE 98 % particules stopped (m) 99,9% particules stopped (m)

3 5 3,8 17 5 22

7 23 30

10 15 20 30 40 60 29 45 73 102 140 190 39 60 97 135 185 270

PORAL GRADE 3 5 7 10 15 20 30 40 60 98 % particules stopped (m) 0,7 2,3 3,4 4,6 6,2 7 8,5 10,5 13 3 99,9% particules stopped (m) 1 5 7,5 12 14 20 26 35
This table has been obtained by: Separation of dry dust in a flow of 18l/hr/sq.cm.

This table has been obtained by: Water separation test according to ISO 4572.

FLOW RATE OF LIQUID (WATER)

FLOW RATE OF GAS (AIR)


10 07 05

10 5 2 1 0,5 0,3 0,2 0,1 0,5

60

40

30

20

15

PORAL BRONZE Flow rate of water at 20C (viscosity 1 centipoise)


liters/hr/sq.cm

Graphics Use : The pressure P 1 is proportional to the viscosity gas passing through the media and to the filter thickness.

1 of

the

03

P 1 183 e

pressure drop read on the chart (in millibar) viscosity of the gas (in micropoise) at use temperature air viscosity at 20C (in micropoise) thickness of the filter (in mm)

Nota: The calculation of the pressure drop of the flow to be used is the actual flow V1

Pressure drop (cm W.G.) per mm filter thickness

10

20 30

50

100

V gas volume at 0C (in liters) under a one bar absolute pressure t 1 gas temperature (inC) P absolute pressure of the gas (in bar)

300 200 100 50 20


PORAL

Grade

60

40

30

20

15

10

07

05

Graphics Use : The pressure P 1 is proportional to the viscosity liquid passing through the media and to the filter thickness.

of the

03

P 1 e

pressure drop read on the chart (in millibar) viscosity of the liquid (in centipoise) at use temperature water viscosity at 20C (in centipoise) thickness of the filter (in mm)

BRONZE Flow rate at 20C (viscosity 183 micropoises)


liters/hr/sq.cm

10 5 3 2 1 0,5 1 2 3 5 10 20 30 50 100

Pressure drop (cm W.G.) per mm filter thickness

2009 Federal-Mogul Sintertech SAS

PRODUITS BRONZE / BRONZE PRODUCTS PORAL


TUBES SANS SOUDURE / SEAMLESS TUBES ITEM (mm) L (mm) S (cm) Classe/Grade BLR 26 261 48 39 05/15/40 BLR 32 321 250 200 e = 3 mm

SINTERTECH

Designation : Item longueur/length - classe/grade. Ex.: BLR 26.48.15

TUBES SOUDES / WELDED TUBES ITEM (mm) L (mm) S (cm) Classe/Grade BT 20.5 501 300 450 BT 10.5 501 600 900 03 /to 15 20 /to 60 BT 16.8 801,5 250 625 BT 8.8 801,5 500 1250 BT 10.10 1002 300 875 e = 2 mm e = 3 mm BT 5.10 1002 600 1750

Designation : Item - paisseur/thickness (x10) - classe/grade. Ex.: BT 8.8.20.10 Soudure tain standard./Standard tin welding. Temprature max. dutilisation/Maxi.temperature of use: 100C Soudure lectrique sur demande./Electrical welding on request. Temprature max.dutilisation/Maxi.temperature of use: 150C

CARTOUCHES / CARTRIDGES CRB 3.25 CRB 3.50 CRB 5.30 ITEM 32 32 50 D (mm) 250 500 300 L (mm) 200 400 450 S (cm) e = 3 mm Classe/Grade 05/15/40 48 48 70 C (mm) 8 8 H (mm) 8 CRB 5.60 50 600 900 03 /to15 70 8 CRB 5.90 50 900 1350 e = 2 mm 70 8 CRB 8.50 80 500 1250 CRB 8.100 CRB 10.60 CRB 10.120 80 100 100 1000 600 1200 2500 1750 3500 20 /to 60 e = 3 mm 100 10 120 12 120 12

100 10

Designation : Item - classe/grade. Ex.: CRB 5.90.15 Matire/Material : Poral Bronze : collerettes/flange fond/base : laiton/brass soudure/welding: tain/tin Temprature max. dutilisation/Maxi. Temperature of use : 100C. Soudure lectrique sur demande./Electrical welding on request. Nota : Soudure transversale pour/Transverse weld for L = 900,1000, 1200 mm
2009 Federal-Mogul Sintertech SAS

PRODUITS BRONZE / BRONZE PRODUCTS PORAL


PLAQUES / PLATES ITEM L (mm)* I (mm)* S (cm)* Classe/Grade BK 4 500 500 2500 BK 5 600 300 1800 03 /to 15 10 /to 60 30 /to 60 BK 8 500 250 1250 BK 10 300 300 900 e = 2 mm e = 3 mm e = 5 mm BK 16 250 250 625

SINTERTECH

Designation : Item - paisseur/ thick. (x10) - classe/grade. Ex.: BK 10.30.15 Mini dim. 300 mm x 300 mm *mini dim Dimensions suprieures possibles par composition de plaques BK. Soudure tain. Higher dimension are possible by composition of BK plates. Tin welding. Soudure lectrique sur demande./Electrical welding on request.

DISQUES / DISCS ITEM D (mm) S (cm) Classe/Grade BC 6 6 0,3 BC 13 BC 21 13 21 1,3 3,5 03 /to 15 20 /to 60 BC 30 30 7 BC 42 42 14 BC 60 60 28 e = 2 mm e = 3 mm BC 90 90 63,5 BC 114 114 102 BC 250 250 450

Designation : Item - paisseur/thickness (x10) - classe/grade. Ex.: BC 114.20.05


Tolerances js 15 (sauf classe/except grade: 40 & 60 : k15)

CONIQUES / CONES ITEM D (mm) H (mm) S (cm) Classe/Grade F (mm) e (mm) c (mm) b (mm) BCN 8 13 20 3 05/10 8 1,5 2,5 4 BCN 12 17 40 10 05/10/20 12 2 2,5 6 BCN 15 21 60 20 05/10/20 15 2,5 3 8 BCN 21 27 80 40 05/10/20 21 3 3 10

Designation : Item - classe/grade. Ex.: BCN 15.05

SILENCIEUX / SILENCERS ITEM D (mm) A (mm) E (mm) H (mm) SMH 1 1/8 10 13 5,5 22,5 SMH 2 1/4 13 19 8,5 36,5 SMH 3 3/8 17 22 8,5 46,5 SMH 4 1/2 21 30 11 59 SMH 5 3/4 27 30 11,5 66,5 SMH 6 1 34 36 14 74

Designation : Item - CO (pas du gaz conique NPT/conic gas thread NPT) ou/or CY (pas du gaz cylindrique/cylindric gas thread).Ex.: SMH 3 CO
2009 Federal-Mogul Sintertech SAS

PRODUITS INOX / STAINLESS STEEL PRODUCTS PORAL


TUBES ISOSTATIQUES / ISOSTATIC TUBES

SINTERTECH

ITEM IS 17.600 IS 23.600 IS 30.600 IS 35.600 IS 40.600 IS 50.600 IS 60.600 IS 80.600 IS 100.600 ext. nomi.(mm) 1002,5 171 231 301,3 351,3 401,3 511,5 601,5 801,5 L(mm) 600 600 600 600 600 600 600 600 600 e moy./mean.(mm) 2,70,4 2,10,3 3,50,3 3,20,3 2,20,3 2,20,3 2,40,3 2,40,3 2,70,4 1840 S moy./mean.(cm) 280 360 510 620 725 910 1090 1460 Classe/Grade 03-05-10-15-20-30-40 ITEM IS 23.1000 IS 50.1000 IS 60.750 IS 80.1000 IS 100.1000 ext. nomi.(mm) 801,5 1002,5 231 511,5 601,5 L(mm) 1000 1000 1000 1000 750 e moy./mean.(mm) 30,4 30,4 2,40,3 2,40,3 2,40,3 2400 3000 S moy./mean.(cm) 650 1525 1360 Classe/Grade 03-05-10-15-20-30-40
Designation : Item - classe/grade. Ex.: IS 30.600.03

CARTOUCHES / CARTRIDGES CRI CRI 3.25 CRI 3.50 CRI 4.25 CRI 4.50 CRI 5.30 CRI 5.60 CRI 5.90 CRI 6.30 CRI 6.60 ITEM 30 30 40 40 50 50 50 60 60 D (mm) 250 500 250 500 300 600 900 300 600 L (mm) 400 300 600 450 900 1350 550 1100 S moy./mean. (cm) 200 03-05-10-15-20-30-40 Classe/Grade e : Voir paisseur du tube isostatique correspondant. See thickness of isostatic cast tubes. C (mm) H (mm) 48 8 48 8 60 8 60 8 70 8 70 8 70 8 80 8 80 8 CRI 6.90 60 900 1650

80 8

Designation : Item - classe/grade. Ex.: CRI 5.90.15

CARTOUCHES / CARTRIDGES CFI ITEM D (mm) L (mm) S (cm) TUBE IS Nbr TUBE IS C (mm) H (mm) Classe / Grade CFI 860 800,5 600 1800 35 3 100 10 CFI 890 CFI 1060 800,5 1002,5 900 600 2700 3500 35 30 3 7 100 120 10 10 03-05-10-15-20-30-40 CFI 1090 1002,5 900 5300 30 7 120 10

Nota : Pour dautres longueurs et diamtres de tubes composant le faisceau, merci de nous consulter.
Please consult us for any other tube length or diameter constituting the cartridge. Designation : Item - classe/grade. Ex.: CFI 890.40 2009 Federal-Mogul Sintertech SAS

PRODUITS INOX / STAINLESS STEEL PRODUCTS PORAL


BOUGIES / CANDLES ITEM (mm) L (mm) S (cm) Classe / Grade BI 4.12 401 125 150 BI 4.25 BI 5.30 401 501,5 250 300 300 450 03-05-10-15-20-30-40 BI 5.60 501,5 600 900

SINTERTECH
BAIONNETTES/ELLIPTICAL CANDLES

Designation : Item - classe/grade. Ex.: BI 5.30.05 Filetage/Thread : M 20/150 16 e : Voir paisseur du tube isostatique correspondant / See thickness of isostatic cast tubes Nota : Pour dautres classes, diamtres, longueurs, matires, merci de nous consulter. Other materials of construction, grades, diameters, length available upon request.

Veuillez nous contacter pour plus dinformation. Please contact us for more information.

PLAQUES / PLATES ITEM L (mm)* I (mm)* S (cm)* Classe / Grade IK 5 600 300 1800 03 /to 40 IK 8 500 250 1250 -0,5 e = 3 mm +0,3 IK 10 300 300 900 -0,5 e = 5 mm +0,3 IK 16 250 250 625

Designation : Item - paisseur/thick. (x10)- classe/grade. Ex.: IK 10.30.15 Mini dim. 300 mm x 300 mm *mini dim. Dimensions suprieures possibles par composition de plaques IK soudes. Higher dimensions are possible by basic IK plates welding.

DISQUES / DISCS ITEM D (mm) S (cm) Classe / Grade IC 10 10 0,78 03 /to 20 20 /to 40 IC 21 21 3,5 IC 30 30 7 e = 2 mm e = 3 mm IC 42 42 14 IC 60 60 28 03 /to 40 IC 90 90 63,5 IC 114 114 102 IC 250 250 450

IC 250 paisseur/thick.: 3 mm 0/-0,5 mm

Classe/Grade 05 & 20 Tolerances js 15

Designation : Item - paisseur/ thickness (x10) - classe/grade. Ex.: IC 114.20.05

CONIQUES / CONES ITEM F (mm) H (mm) D (mm) e (mm) c (mm) b (mm) S (cm) ICN 8 8 20 13 1,5 2,5 1 1 ICN 12 12 32 17 2 2,5 2 5 ICN 15 15 41 21 2 3 2 10
Classe/Grade 05 & 20

ICN 21 21 59 27 2,5 3 2,8 20


2009 Federal-Mogul Sintertech SAS

Designation : Item - classe/grade. Ex.: ICN 8.20

2009 Federal-Mogul Sintertech SAS

Das könnte Ihnen auch gefallen