Beruflich Dokumente
Kultur Dokumente
TM
Mechanical Seals
Maximum Operating Pressure @ 3600 rpm: 300 psi @ 20F (-5C) Maximum Operating Temperature: 400F (205C)
CARTRIDGE DESIGN
No measurement required, setting clips ensure the exact seal setting every time.
METAL-TOMETAL DRIVE
True metal-to-metal drive eliminates slippage and potential shearing of drive pins.
ISOLATED SPRINGS
Springs are completely isolated from the pumpage to prevent clogging. Aflas is standard.
FULLY-BALANCED DESIGN
Allows for higher working pressures. Hydraulically balanced faces ensure optimum fluid film at the faces during process fluctuations.
CAPTURED O-RINGS
Fully captured o-rings are unique and allow the SP1/SP2 to operate even under vacuum conditions.
Screws clamp directly to the shaft/sleeve ensuring positive lock. Drive screws will not deform the sleeve.
Description
Rotary O Ring Sleeve O Ring Sleeve Springs Rotary Face Stationary Face Stationary O Ring Gland Clamp Ring Drive Screws Clip Screws Setting Clips Anti-tamper Screws Gasket Restriction Device O Ring Restriction Device
Material
Aflas 100 Aflas 100 316L Stainless Steel Alloy 276 Carbon or SiC SiC Aflas 100 316 Stainless Steel 316L Stainless Steel Stainless Steel Stainless Steel Brass Stainless Steel AF1 / GFT EPR Carbon
Standard Bore
14 1 8 13 9 2 3 4 5 6 7 15 16
Description
Rotary O Ring Sleeve O Ring Sleeve Springs Inner Rotary Face Inner Stationary Face Stationary O Ring Stationary O Ring Outer Stationary Face Outer Rotary Face Drive Band O Ring Clamp Ring O Ring Clamp Ring Anti-tamper Screws Centering Clips Clip Screws Gland Drive Screws Springs Gasket
Material
Aflas 100 Aflas 100 316L Stainless Steel Alloy 276 Carbon or SiC SiC Aflas 100 Viton SiC Carbon Viton Viton 316L Stainless Steel 316 Stainless Steel Brass Stainless Steel 316 Stainless Steel Stainless Steel Alloy 276 AF1 / GFT
9 10 11
Enlarged Bore
15 16 20 12 13 1 14 17
11 12 13 14 15 16 17 18 19 20
19
18
9 10 11
All Tapped Connections are 1/4" NPT Viton is a registered trademarks of Dupont Dow Elastomers. AFLAS is a registered trademark of the Asahi Glass Co., Ltd.
Features:
2.64 US gallons (10 liters) or 6.60 US gallons (25 liters) compact capacity 304 stainless steel construction to ASME VIII Div 1. 1995 / BS5500 CAT III. 1997 Maximum working pressure 232 psig @ 212F (16 barg @ 100C). Tested to 348 psig (24 barg) All systems are shipped complete and fully pressure tested
LEVEL GAUGE
Allows monitoring of fluid level.
1" (25.4mm) NPT port for top entry-level gauge Current and peak temperature strips fitted as standard Minimum fluid level indicator
DRAIN VALVE
Sediment pipe on feed port prevents contamination going through the seal Integral mounting bracket High quality powder coat finish Internal cooling coil optional Push-in fittings standard with nylon hose Compression fittings and braided stainless lines available
FLOW INDICATOR
Indicates seal failure.
THREE-WAY VALVE
Allows pressure relief when setting regulator, draining of tank, and flushing of seal and chamber without returning flush water to seal pot.