Beruflich Dokumente
Kultur Dokumente
COP 3038
Technical specification
A 30 kW hydraulic rock drill for fast tunnelling and drifting in the hole range 4364 mm. Exceptionally high penetration rate and excellent drill steel life.
Face drilling
impact ratings
COP 3038
Copyright 2009, Atlas Copco Rock Drills AB, rebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos in this brochure may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
rotation motors
COP 3038 05 (100 cc) Rotation range, rpm Torque, max, Nm Working pressure, max, bar Oil consumption, l/min 0380 400 (06 (125 cc) 0300 500 140 60 07 (160 cc) 0240 650 Flushing water pressure, max, bar Lubricating air consumption at 2 bar, l/s Flushing water consumption, l/min*
*Flushing water consumption depends strongly on hole diameter, bit type, drill rod size and rock hardness. The figures above are typical values for spherical button bits in granite, 200 MPa.
40
45
50
55
60
65
70 mm
Overhaul kit
COP 3038 Seal kit 200 impact hours kit 400 impact hours kit Overhaul kit 3115 2900 03 3115 2900 04 3115 2900 07 3115 2900 06
Shank adapters
COP 3038 T38E TC45 TC45E 7490 5157 74 7490 5161 30 7490 5156 66
9851 2657 01
09/2009