Beruflich Dokumente
Kultur Dokumente
ACCESSORIES
COMPATIBILITY MATRIX OF PROXIMITY SWITCHES FOR AUTOMATION COMPONENTS
Component LEP-1 LEP-2 DAP(I)-1 DZA-1 DAP(I)-2 DZA-2 DAP-3 DZA-3 DT Pushbutton KUS-16-...-SD KUS-20-...-SD KUS-25-...-SD VS-30 VS-60 PS HE SHA-340 SHX-340 SHA-470 SVA-130 HE
1 OK OK OK OK b OK OK OK OK OK OK OK OK OK OK OK OK OK
2 OK OK OK OK b OK OK OK OK OK OK OK OK OK OK OK OK OK
3 OK OK OK OK OK a a a OK OK OK
4 OK
6 OK
Gripper GPP(I)-1(-ISO) GPP(I)-2(-ISO) GPP(I)-3(-ISO) GPU(I)-10 GPU(I)-14 GPU(I)-20 GPU(I)-25 GPL-30-1 GPL-40-1 GPL-45-2 GPL-60-2 GPL-75-2 GPPMI-1 GPPM-2Y GWU(I)-16 GWU(I)-20
1 OK OK OK OK OK OK OK c d e f g OK OK
2 OK OK OK OK OK OK OK c d e f g OK OK
3 OK OK OK OK OK OK OK OK OK OK OK OK OK OK
5 OK
No. 1 2 3 4 5* 6
Ref. No.
508842 508850 508843 508844 508846 508847
Description 6.5x22 PNP with cable L=2000 mm 6.5x22 NPN with cable L=2000 mm 6.5x40 PNP with plug M8x1x45 PNP with plug 3x22 PNP with cable L=2000 mm 8x8x59 PNP with plug
a b c d e f g
only cable with angled plug min. angle of rotation 15 gripping distance 830 mm gripping distance 1840 mm gripping distance 1745 mm gripping distance 3260 mm gripping distance 4775 mm
5*
304
Ref. No.
6.5 mm PNP, short-circuit and reverse polarity protected, sensing distance 2 mm, flush-mountable with LED1) L = 2000 mm 508842
22
6.5
6.5 mm NPN, short-circuit and reverse polarity protected, sensing distance 2 mm, flush-mountable, with LED1) L = 2000 mm 508850
3.5
22 L
6.5 mm PNP, pluggable, short-circuit and reverse polarity protected, sensing distance 2 mm, flush-mountable, with ring LED 508843
6.5
31 40
M8 x 1, PNP, pluggable, short-circuit and reverse polarity protected, sensing distance 2 mm, with LED
M8x1
508844
32 45
305
Ref. No.
2.6
22 L
3 mm PNP, short-circuit and reverse polarity protected, sensing distance 0.6 mm, flush-mountable with LED1) L = 2000 mm
508846
8x8 mm PNP, pluggable, short-circuit and reverse polarity protected, sensing distance 2 mm, flush-mountable, with ring LED L = 2000 mm
10
20
M
508847
3
3 LED (4x)
45
CONNECTION CABLE
for proximity switch 3-pin, highly flexible, pluggable2) 1 m, with socket straight on one side 1 m, with one-side angled socket 5 m, with socket straight on one side 5 m, with one-side angled socket 10 m, with socket straight on one side 10 m, with one-side angled socket
8x8
5
L
30.5
26.5
506403 506404
43.5
41
24
1) limited use for dynamic load, e. g. for use in cable chains. 2) specificly for dynamic load, e. g. for use in cable chains.
12
13
13
306
PNEUMATICS CONNECTIONS
1 2
1 Threaded outgoing air-throttle M5, with angled swivel connection, pluggable, 4 mm 2 Threaded outgoing air-throttle M5, angled, pluggable, 4 mm 3 Threaded outgoing air-throttle M5, angled, pluggable, 6 mm 4 Threaded outgoing air-throttle 1/8, angled, pluggable, 6 mm
505193 505197
7 Screw-connector M5, straight, pluggable, 4 mm 8 Screw-connector M5, straight, pluggable, 6 mm 9 Screw-connector 1/8, straight, pluggable, 6 mm
8 7
10 Angled screw connector M5, pluggable, 4 mm 11 Angled screw connector 1/8 , pluggable, 6 mm
10 11
506319 503659
307
PNEUMATICS CONNECTIONS
12 Threaded outgoing air-throttle M3, angled, pluggable, 3 mm 13 Angled screw connector M3, pluggable, 3 mm 14 Screw-connector M3, straight, pluggable, 3 mm
14
PNEUMATIC HOSE
504983 504745
for easy relubrication of LEPs, SHAs and SVAs via lubricating nipples.
OIL CONTAINER (filled), 100 ml
504720
filled with oil Klber Paraliq P460, suitable for all Montech automation components
504721
308
STOP VALVE
Ref. No.
Pilot-controlled double check valve made of aluminum and black anodised, to maintain the actual state of a connected consumer in the case of pressure loss caused by an emergency stop or a fractured pipe
RETAINER FOR STOP VALVE
46582 46914
COVER
for covering the hose connection in the linear unit LEP if an energy conducting chain is used. horizontal vertical
504784 504780
suitable for example for all linear units LEP, servo-horizontal axes SHA-340 and SHE/SVE-130 503693
PROTECTIVE HOSE PG-36 (per mm)
504645