Beruflich Dokumente
Kultur Dokumente
1) List of required Hardware and Software 2) Installation 3) Running the Software 4) Software Overview 4.1) "Device" Tab 4.2) "Phones" Tab 5) How to unlock BB5 phones 6) In case of Errors and Problems
2) Installation
This chapter is a manual on how to install the JAF Driver and BB5 V2.01 software. 2.1) Please make sure, that the respective box interface has been installed correctly with the latest drivers. For further information please read the box's manual. 2.2) Download and Unpack the following files
JAF_Driver_setup_English
JAF_Nokia_BB5_and_BB5Plus_201_FREE_by_Zulea BB5 unlocker user manual Download Links: BB5 & BB5 plus V2.01 unlocker
2.3) Please follow the directions below in the correct order to be able to install your box correctly! 2.3.1) You will have to install the PKey driver FIRST. The PKEY is a small USB device with an integrated card. This card represents a valid licence for the JAF software. Since we're using a cracked software version in this case, you won't have to buy this device. The PKey-driver.rar file contains the installer. Double-click it!
Hit Next and the driver will be succesfully installed only seconds later!
2.3.2) BB5 unlocker Software Installation Run the JAF_Nokia_BB5_and_BB5Plus_201_FREE_by_Zulea from its folder or copy it on to your desktop. ( If you have a P_KEY, please disconnect to your computer !!!)
This window will immediately appear: You should now have connect the jaf to your PC and the software detect the JAF box. Connect the RJ45 cable to your phone. There are 2 unlock option. 1) BB5 Old (SL1) 2) BB5Plus (SL2 )
depend on your phone model, please check the phone models support list.
RAPIDO: (SL1) * N95 (RM-159) * N95 (RM-245) * N95 (RM-160) * E90 (RA-6) RAP3GV2 models: (SL1) * 6630 (RM-1) * 6680 (RM-36) * 6681 (RM-57) * 6682 (RM-58) * N70 (RM-84) * N70-5 (RM-99) * N71 (RM-67) * N90 (RM-42) * N91-1 (RM-43) * N91-8GB (RM-43) * N91-5 (RM-158) * N93 (RM-55) Rap3Gv3 phones: (SL1) * 3109c (RM-274) * 3110c (RM-237) * 3250 (RM-38) * 3500c (RM-272) * 3500cb (RM-273) * 5200 (RM-174) * 5200b (RM-181) * 5300 (RM-146) * 5300b (RM-147) * 5500 (RM-86) * 5700 (RM-230) * 5700 (RM-302) * 6085 (RM-198) * 6086 (RM-188) * 6086b (RM-260) * 6125 (RM-178) * 6126/6133 (RM-126) * 6131 (RM-115) * 6131 NFC (RM-216) * 6136 (RM-199) * 6151 (RM-200) * 6233 (RM-145) * 6234 (RM-123) -(V57.20 & ABOVE NOT SUPPORTED) * 6280/6288 (RM-78) * 6290 (RM-176) * 6300 (RM-217) * 6300b (RM-222) * 7370 (RM-70) * 7373 (RM-209) * 7390 (RM-140) * 8600 (RM-164) * E50 (RM-170)
* * * * * * * * * * * * * * *
E50 (RM-171) E50 (RM-172) E61 (RM-89) E61i (RM-227) E62 (RM-88) E65 (RM-208) N73-1 (RM-133) N73-5 (RM-132) N75 (RM-128) N76 (RM-135) N76 (RM-149) N77 (RM-194) N80-1 (RM-92) N80-3 (RM-91) N92 (RM-100)
BB5+ (SL2) * * * * * * * * * * * * * * * * 3120C 3555 3555b 5310 - (V58.58; V59.59 & ABOVE NOT SUPPORTED) 5310b 5610 5610d 6263 6300i -(V57.20 & ABOVE NOT SUPPORTED) 6301 6500S - (V59.60 & ABOVE NOT SUPPORTED) 6500C - (V59.45 & ABOVE NOT SUPPORTED) 6555 7500 7900 8800
Rapido SL2 * * * * * * * * * * * * * * * * * * * * 5220 (NOT SUPPORTED) 5320 (NOT SUPPORTED) 5800 (NOT SUPPORTED) 6110 6120c 6121c 6124c 6210 6220c 6290 6600s/f (NOT SUPPORTED) 6650 E51 E66 v210.21.007 SUPPORTED E71 N78 (NOT SUPPORTED) N81 (NOT SUPPORTED) N81 8gb (NOT SUPPORTED) N79 N82 (NOT SUPPORTED)
* N85 (NOT SUPPORTED) * N95 8gb * N96 (NOT SUPPORTED) RAPIDO SL30 (SL3) Unsupported by all boxes * * * * * 7310 (NOT SUPPORTED) 5310 - (V58.58; V59.59 & ABOVE NOT SUPPORTED) 6300i -(V57.20 & ABOVE NOT SUPPORTED) 6500S - (V59.60 & ABOVE NOT SUPPORTED) 6500C - (V59.45 & ABOVE NOT SUPPORTED)
b) Hit the Chk Connection button to verify your setup. In case everything is ok, the flashchips's ID will be displayed.
c) Change to the Phones tab. Change Select phone model to "Automatic". You will now be able to get all of the phone's information by clicking Phone Info.
d) It is strongly recommended to create a backup of the PM 308 sector before starting the unlocking procedure. In case you want to lock the phone again or in case something goes wrong while unlocking, you will always be on the safe side. Hit the Make Backup button in order to create such a backup. After selecting a directory to save it in, it will be created only moments later!
e) Now hit the Unlock button. The unlocking procedure will now be executed. Everything will run fully automatic and may take up to three minutes. A message will be displayed after the procedure was succesful.
b)
Repair SL zone
In case this doesn't work, you can also repair the whole SIMLOCK-Zone. Click Repair SK zone to do this and wait until the operation has finished!
Tips 1) After connect the cable to the phone, the phone should turn on in LOCAL Mode or blank screen. If the phone dont turn on, keep your finger on the power switch while the phone try to dectect the phone. 2) Some SL_2 phone will need to use the Make unlocked PM function.