Beruflich Dokumente
Kultur Dokumente
EduShake
How to download
Address: http://www.proshake.com/ At the menu select: Download EduShake setup.exe users manual Note 1 Be sure that you have defined period (.) as the decimal point (can be changed at Regional Settings) Note 2 The file names must be up to 8-charcters long, without any symbols Note 3 For Windows 7 and Windows Vista you must install a virtual XP environment. Directions can be found at proshake.com
EduShake
Input of data
EduShake
Input of soil data
In tab Profile give the data of each soil stratum and the G/Gmax and damping relationships
EduShake
Input of soil data
Project title
Depth of water table No. of layers = total number of layers + 1 for the bedrock
EduShake
Input data for each soil layer
Name of soil layer G/Gmax & damping relationships Data for each soil layer
In tab Select output you define the parameters that will be calculated for each layer
EduShake
Input data for each soil layer
Tick if the top of the layer is on the outcrop Define the damping values for which response spectra will be calculated
EduShake
Summary of input data of soil layers
Summary Data
EduShake
Input of earthquake data
In tab Input motion give the data for the seismic motion
EduShake
Input of earthquake data
In tab File you must save your file No. of seismic motions eff/max (M-1)/10, where M = earthquake magnitude No. of iterations (810 are usually sufficient)
Parameters of seismic motion. Here you can change pga if you want
EduShake
Solution
EduShake
Solution
EduShake
Results
EduShake
Results
EduShake
Results
Tab Ground Motion for time-histories of the motion at each layer
Check soil layers for which you want plot of ground motion (1 plot for all checked layers) If you want separate plots for each layer, check only one layer and repeat the procedure for the other layers
Select Plot
EduShake
Results
EduShake
Results
Select Plot
EduShake
Results
EduShake
Results
Tab Depth Plots for distribution with depth
Select Plot
EduShake
Results