Beruflich Dokumente
Kultur Dokumente
7
Published in Aug.1993 Revised in Dec.2004
2.
SPECIFICATIONS
LS Series
LSStroke 050 100 150 200 250 300 350 400 450 50mm 100mm 150mm 200mm 250mm 300mm 350mm 400mm 450mm M U
C
Thread of extension rod M50.8 10-32UNF
/CEM
CE marking
Transmission cable
LWCable length(L)
005 010 015 020 025 030 035 040 045 050
055 55m 105 060 60m 110 065 65m 115 070 70m 120 075 75m 125 080 80m 130 085 85m 135 090 90m 140 095 95m 145 100 100m 150 Max. length
105m 155 155m 205 110m 160 160m 210 115m 165 165m 215 120m 170 170m 220 125m 175 175m 225 130m 180 180m 230 135m 185 185m 235 140m 190 190m 240 145m 195 195m 245 150m 200 200m 250 LW-A--0 : 300m LW-B--0 : 150m LW---1 : 15m
205m 210m 215m 220m 225m 230m 235m 240m 245m 250m
255 260 265 270 275 280 285 290 295 300
Temperature range of cable 255m A -40 to +80C 260m B -40 to +125C 265m 270m 275m 280m 285m 290m 295m 300m
Standard
39311E2.9
-2-1-
2.
SPECIFICATIONS
LS Series
SPECIFICATIONS
Stroke Output voltage Excitation Coil Impedance Linearity Operating temperature Operating humidity range Temperature drift Insulation Resistance Dielectric Strength Shock Vibration Magnetically Shielding 50, 100, 150, 200, 250, 300, 350, 400, 450mm Approx. (-0.8 to +0.8V)/full stroke to approx. (-1.3 to +1.3V)/full stroke at relay signal 5Vrms (measured with the test circuit) 3kHz, 5 to 20Vrms 600100 (3kHz) 0.2% of 100% stroke, 1.5% of 110% stroke (measured with the test circuit) -40 to +125C (-40 to +257F REF.) 95% RH or less (noncondensing, non-submerged) 0.03% of F.S./C or less More than 10M at 500VDC (between each pins and body) 1mA or less at 500VAC for one minute (between each pins and body) 490m/s (50g REF.) at 2kHz Internal magnetically shielded 3-cond.shielded cable with mating connector (5m, 0.75mm (AWG No.20)) LW-A-S-0(-40 to +80C, straight type connector, without armor) LW-A-S-1(-40 to +80C, straight type connector, with armor) LW-A-R-0(-40 to +80C, angle type connector, without armor) Standard Cable LW-A-R-1(-40 to +80C, angle type connector, with armor) LW-B-S-0(-40 to +125C, straight type connector, without armor) LW-B-S-1(-40 to +25C, straight type connector, with armor) LW-B-R-0(-40 to +125C, angle type connector, without armor) LW-B-R-1(-40 to +125C, angle type connector, with armor) Connected Monitor VM-3P, VM-11P/VM-5E, VM-5A
2 2
2.5k 2.5k
Smoothing Circuit
Output
39311E2.9
-2-2-
2.
SPECIFICATIONS
LS Series
LSStroke 050 100 150 200 250 300 350 400 450 50mm 100mm 150mm 200mm 250mm 300mm 350mm 400mm 450mm M U Thread of extension rod M50.8 10-32UNF
T
1
/DF
/CEM
CE marking
SPECIFICATIONS
Stroke Output voltage Excitation Coil Impedance Linearity Operating Temperature Operating humidity range Temperature drift Insulation Resistance Dielectric Strength Shock Vibration Screws of terminal block Applicable wire gauge Connected Monitor 50, 100, 150, 200, 250, 300, 350, 400, 450mm Approx. (-0.8 to +0.8V)/full stroke to approx. (-1.3 to +1.3V)/full stroke at relay signal 5Vrms (measured with the test circuit) 3kHz,5 to 20Vrms 600100(3kHz) 0.2% of 100% stroke, 1.5% of 110% stroke (measured with the test circuit) -40 to +150C (-40 to +302F REF.) 95% RH or less (noncondensing, non-submerged) 0.03% of F.S./C or less More than 10M at 500VDC (between each terminal and body) 1mA or less at 500VAC for one minute (Between each terminal and body) 490m/s (50g REF.) at 2kHz M4 0.75 to 2mm
2 2
2.5k 2.5k
Smoothing Circuit
Output
39312E2.9
-3-