Beruflich Dokumente
Kultur Dokumente
1-4 Inch
Taper/Taper joint
Bondstrand 2000/2000G
and 2416/3416 Glassber
Reinforced Epoxy (GRE) pipe
systems for offshore service
for 16 bar pressure
6-40 Inch
Ballast water
Cassions
Cooling water
Disposal
Drains
Drilling muds
Fresh water
Potable water
Produced water
Fire water
Saltwater/seawater
Sanitary/sewage
Column piping
Vent lines
Approvals
Characteristics
Table of Contents
GENERAL DATA
Adhesive ............................................................................................................. 23
Conversions ....................................................................................................... 24
Engineering design & installation data ............................................................... 24
Hydrostatic testing .............................................................................................. 24
Important notice .................................................................................................. 24
Joining system and conguration ......................................................................... 3
Mechanical properties .......................................................................................... 4
Physical properties ............................................................................................... 4
Pipe series ............................................................................................................ 3
Pipe length ........................................................................................................... 4
Pipe dimensions and weights ............................................................................... 6
Pipe performance ................................................................................................. 5
Span length .......................................................................................................... 7
Surge pressure ................................................................................................... 24
FITTINGS DATA
Couplings ........................................................................................................... 21
Deluge Couplings ............................................................................................... 16
Elbows .............................................................................................................. 8-9
Flanges .......................................................................................................... 19-21
Joint dimensions Quick-Lock ............................................................................ 7
Joint dimensions Taper/Taper ............................................................................... 7
Laterals ............................................................................................................... 15
Nipples ............................................................................................................... 22
Reducers ....................................................................................................... 17-18
Saddles .............................................................................................. 14-15, 22-23
Specials .............................................................................................................. 23
Stub-ends ........................................................................................................... 20
Tees ............................................................................................................... 10-14
Pipe series
Pipe
Filament-wound Glassber Reinforced Epoxy (GRE) pipe for Bondstrand adhesivebonding systems. MDA (diaminodiphenylmethane) or IPD (isophoronediamine) cured.
Fittings
A wide range of lined lament-wound Glassber Reinforced Epoxy (GRE) ttings for
Bondstrand adhesive-bonding systems. For special ttings, not listed in this product
guide, please contact your Ameron representative.
Flanges
Filament-wound Glassber Reinforced Epoxy (GRE) heavy-duty and stub-end anges
for Quick-Lock and Taper/Taper adhesive bonding systems. Standard ange drilling
patterns as per ANSI B16.5 (150 Lb). Other ange drilling patterns, such as ANSI B16.5
(> 150 Lb), DIN, ISO and JIS are also available.
Bondstrand 2000/2000G
Glassber Reinforced Epoxy (GRE) pipe system; MDA or IPD cured;
Standard 0.5 mm internal resin-rich reinforced liner;
Maximum operating temperature: 93C (IPD) or 121C (MDA);
For higher temperatures, please contact Ameron;
Maximum pressure rating: 16 bar.
Bondstrand 2416/3416
Glassber Reinforced Epoxy (GRE) pipe system; MDA or IPD cured;
Standard 0.5 mm internal resin-rich reinforced liner;
Maximum operating temperature: 93C (IPD) or 121C (MDA);
For higher temperatures, please contact Ameron;
Maximum pressure rating: 16 bar.
Conductive
Conductive pipe systems are available to prevent accumulation of potentially dangerous
levels of static electrical charges. Pipe, ttings and anges contain high strength
conductive laments. Together with a conductive adhesive this provides an electrically
continuous system.
Description
Pipe Diameter
Joining system
Liner*
Temperature**
Cure
Pressure rating
Bondstrand
2000
1-4 inch
Quick-Lock
0.5 mm
121 C
MDA
16 bar
Bondstrand
2000G
1-4 inch
Quick-Lock
0.5 mm
93 C
IPD
16 bar
Bondstrand
2416
6-40 inch
Taper/Taper
0.5 mm
121 C
MDA
16 bar
Bondstrand
3416
6-40 inch
Taper/Taper
0.5 mm
93 C
IPD
16 bar
Pipe
25-100 mm (1-4 inch):
Quick-Lock (straight/taper) adhesive joint with integral pipe stop in bell end;
End conguration: Integral Quick-Lock bell end x shaved straight spigot.
150-1000 mm (6-40 inch):
Taper/Taper adhesive joint;
End conguration: Integral Taper bell x shaved taper spigot.
Fitting
25-100 mm (1-4 inch):
Quick-Lock (straight/ taper) adhesive joint with integral pipe stop in bell end;
End conguration: integral Quick-Lock bell ends.
150-1000 mm (6-40 inch):
Taper/Taper adhesive joint. End conguration: Integral Taper bell ends.
Flange
25-100 mm (1-4 inch):
Quick-Lock (straight/ taper) adhesive joint with integral pipe stop in bell end;
End conguration: integral Quick-Lock bell end.
150-1000 mm (6-40 inch):
Taper/Taper adhesive joint. End conguration: Integral Taper bell ends.
Note: Pipe nipples, saddles and anged ttings have different end congurations.
Ameron 2006. FP 943-16 04/06. Page 3 of 24. Printed in The Netherlands.
Nominal
Pipe Size
[mm]
25-40
50-100
150
200-600
450-1000
Joining
System
[inch]
1-1
2-4
6
8-24
18-40
Quick-Lock
Quick-Lock
Taper/Taper
Taper/Taper
Taper/Taper
Typical physical
properties
Typical mechanical
properties
Pipe property
Thermal conductivity pipe wall
Thermal expansivity (lineair)
Flow coefcient
Absolute roughness
Density
Specic gravity
Units
W(m.K)
10-6 mm/mm C
Hazen-Williams
10-6 m
kg/m3
-
Value
.33
18.0
150
5.3
1800
1.8
Method
Ameron
Ameron
ASTM D-792
Units
21C
93C
Method
N/mm2
250
ASTM D-1599
N/mm2
N/mm2
220
25200
0.65
0.81
ASTM D-2290
ASTM D-2290
Ameron
N/mm2
N/mm2
80
12500
0.40
85
65
9700
0.44
ASTM D-2105
ASTM D-2105
ASTM D-2105
Ameron
N/mm2
12500
8000
ASTM D-2925
N/mm2
124*
ASTM D-2992
(Proc. B.)
Units
21C
93C
Method
N/mm2
300
ASTM D-1599
N/mm2
N/mm2
380
23250
0.93
18100
1.04
ASTM D-2290
ASTM D-2290
Ameron
N/mm2
N/mm2
65
10000
0.40
80
50
7800
0.45
ASTM D-2105
ASTM D-2105
ASTM D-2105
Ameron
N/mm2
9200
7000
ASTM D-2925
N/mm2
148*
ASTM D-2992
(Proc. B.)
Typical pipe
performance
Bondstrand 2000/2416 (MDA cured) at 21C with integral Quick-Lock (1-4 inch) or
Taper/Taper (6-40 inch) socket ends for adhesive bonding.
Nominal
Pipe
Size
[mm]
[inch]
25
1
40
1
50
2
80
3
100
4
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
700
28
750
30
800
32
900
36
1000
40
Internal
Pressure
**Rating
[bar]
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
*Ultimate
Collapse
Pressure
[bar]
499
148
85
24.5
26.6
3.7
3.4
3.3
3.3
3.4
3.3
3.3
3.3
3.3
3.2
3.3
3.2
3.2
3.3
STIS
Stifness
Factor
Pipe
Stiffness
[N/m2]
3142383
949574
534665
157309
154414
12069
11085
10679
10743
11070
10731
10719
10547
10605
10303
10387
10240
10192
10328
[lb.in]
502
502
554
554
1281
453
941
1809
3092
4218
6105
8158
11015
19148
32924
40831
48843
69208
96228
[psi]
16187
4812
2729
796
863
94
86
83
84
86
84
83
82
83
80
81
80
79
80
Internal
Pressure
**Rating
[bar]
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
*Ultimate
Collapse
Pressure
[bar]
460
137
78
22.6
24.5
2.4
1.8
1.9
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.7
STIS
Stifness
Factor
Pipe
Stiffness
[N/m2]
2087390
620545
351965
102636
111283
7821
5991
6098
5963
5820
5816
5899
5923
5753
5891
5867
5847
5814
5787
[lb.in]
504
504
556
556
1286
292
504
1024
1700
2195
3277
4447
6130
10288
18659
22858
27644
39130
53425
[psi]
16251
4831
2740
799
866
61
47
47
46
45
45
46
46
45
46
46
46
45
45
Pipe
Inside
Diameter
[mm]
27.1
42.1
53.0
81.8
105.2
159.0
208.8
262.9
313.7
344.4
393.7
433.8
482.1
578.6
700.0
750.0
800.0
900.0
1000.0
Minimum
Structural Wall
Thickness [t]
[mm]
3.0
3.0
3.1
3.1
4.1
2.9
3.7
4.6
5.5
6.1
6.9
7.6
8.4
10.1
12.1
13.5
13.8
15.5
17.3
Average
Pipe
Weight
[kg/m]
0.7
1.3
1.3
1.8
3.1
3.0
4.9
7.5
10.6
12.8
16.4
19.8
24
35
50
58
65
82
102
Designation per
ASTM
D-2996
(RTRP-11...)
AW1-2112
AW1-2112
AW1-2112
AW1-2112
AW1-2113
AW1-2112
AW1-2112
AW1-2114
AW1-2116
AW1-2116
AW1-2116
AW1-2116
AW1-2116
AW1-2116
AW1-2116
AW1-2116
AW1-2116
AW1-2116
AW1-2116
Pipe
Inside
Diameter
[mm]
27.1
42.1
53.0
81.8
105.2
159.0
208.8
262.9
313.7
344.4
393.7
433.8
482.1
578.6
700.0
750.0
800.0
900.0
1000.0
Minimum
Structural Wall
Thickness [t]
[mm]
3.0
3.0
3.1
3.1
4.1
2.5
3.0
3.8
4.5
4.9
5.6
6.2
6.9
8.2
10.0
10.7
11.4
12.8
14.2
Average
Pipe
Weight
[kg/m]
0.7
1.3
1.3
1.8
3.1
2.6
4.0
6.2
8.7
10.4
13.4
16.3
20
28
42
48
54
68
83
Designation per
ASTM
D-2996
(RTRP-11...)
AX1-2112
AX1-2112
AX1-2112
AX1-2112
AX1-2113
AX1-2112
AX1-2112
AX1-2113
AX1-2114
AX1-2115
AX1-2116
AX1-2116
AX1-2116
AX1-2116
AX1-2116
AX1-2116
AX1-2116
AX1-2116
AX1-2116
Quick-Lock
dimensions
Taper/Taper
dimensions
Insertion
Depth
(Ds)
[mm]
27
32
46
46
46
[inch]
1
1
2
3
4
Spigot Diameter
Min.
Max.
Sd
Sd
[mm]
[mm]
32.6
32.9
47.5
47.8
59.2
59.6
87.6
88.0
112.5
112.9
Spigot Length
Min.
Max.
L
L
[mm]
[mm]
28.5
31.0
33.5
36.0
49.0
52.0
49.0
52.0
49.0
52.0
Dia of
Spigot
at Nose
Sd
[mm]
161.0
210.8
264.9
315.7
347.4
396.7
436.8
486.1
583.6
711.0
762.0
811.0
912.0
912.0
1016.0
1016.0
Span length
[inch]
1
1
2
3
4
6
8
10
12
14
16
18
20
24
28
30
32
36
40
Single
Span*
2000/2416
[m]
2.6
2.9
3.1
3.5
4.0
4.2
4.7
5.3
5.7
6.0
6.4
6.7
7.1
7.7
8.5
8.8
9.0
9.6
10.1
Continuous
Span*
2000/2410
[m]
3.3
3.7
4.0
4.5
5.1
5.3
6.0
6.7
7.3
7.7
8.1
8.5
9.0
9.8
10.7
11.1
11.5
12.1
12.8
Single
Span*
2000G/3410
[m]
2.4
2.7
2.9
3.3
3.7
3.3
3.5
3.9
4.2
4.4
4.7
5.0
5.2
5.7
6.3
6.5
6.7
7.1
7.5
Continuous
Span*
2000G/3410
[m]
3.0
3.4
3.7
4.2
4.7
4.2
4.7
5.3
5.8
6.0
6.4
6.8
7.1
7.8
8.6
8.9
9.2
9.7
10.2
* Span recommendations are based on pipes lled with water having a density of 1000 kg/m3 and
include no provisions for weights caused by valves, anges or other heavy objects. At 93C, span
lengths are approx. 10% lower.
Elbows 90.
Quick-Lock
Taper/Taper
[inch]
1
1
2
3
4
6
8
10
12
14
16
18
20
24
28
30
32
36
36
40
40
Laying
Length (LL)
[mm]
65
81
76
114
152
240
315
391
463
364
402
472
523
625
726
777
828
929
929
1040
1040
Overall
Length (OL)
[mm]
92
113
122
160
198
290
395
501
603
504
572
642
723
855
956
1037
1118
1279
1189
1360
1270
Average
Weight
[kg]
0.3
0.4
0.5
1.1
1.6
4,2
12
16
26
37
53
76
125
228
238
290
364
595
544
650
610
Elbows 45
Quick-Lock
Taper/Taper
[inch]
1
1
2
3
4
6
8
10
12
14
16
18
20
24
28
30
32
36
36
40
40
Laying
Length
(LL)
[mm]
22
29
35
51
64
106
137
169
196
125
142
204
225
268
310
331
352
394
394
450
450
Overall
Length
(OL)
[mm]
49
61
81
97
110
156
217
279
336
265
312
374
425
498
540
591
642
744
654
770
680
Average
Weight
[kg]
0.2
0.3
0.4
0.8
1.1
2,5
7,4
12,4
22
29
41
54
75
130
177
226
272
463
382
340
300
Elbows 22
Quick-Lock
Taper/Taper
Pipe
Size
[mm]
25
40
50
80
100
150
200
250
300
350
400
450
500
600
700
750
800
900*
900**
[inch]
1
1
2
3
4
6
8
10
12
14
16
18
20
24
28
30
32
36
36
Overall
Length
(LL)
[mm]
9
9
13
21
29
60
76
68
77
71
85
106
116
136
157
167
177
197
197
Length
(OL)
[mm]
36
41
59
67
75
110
156
178
217
211
255
276
316
366
387
427
467
547
457
Nominal
Average
Weight
[kg]
0.1
0.2
0.5
0.7
1.0
1,4
5,1
9,7
15,5
21
24
39
56
93
123
158
198
343
266
Equal Tees
Filament-wound equal Tee with integral Quick-Lock (1-4 inch) or Taper/Taper (6-40 inch)
socket ends for adhesive bonding.
Nominal
Pipe
Size
Quick-Lock
Taper/Taper
[mm]
25
40
50
80
100
150
200
250
300
350
400
450
500
600
700
750
800
900*
900**
1000*
1000**
[inch]
1
1
2
3
4
6
8
10
12
14
16
18
20
24
28
30
32
36
36
40
40
Laying
Length
total run
(LL1)
[mm]
54
60
128
172
210
306
376
452
528
544
590
678
740
868
994
1046
1118
1248
1248
1416
1416
Overall
Length
total run
(OL1)
[mm]
108
124
220
264
302
406
536
672
808
824
930
1018
1140
1328
1454
1566
1698
1948
1768
2056
1876
Laying
Length
branch
(LL2)
[mm]
27
30
64
86
105
153
188
226
264
272
295
339
370
434
497
523
559
624
624
708
708
Overall
Length
branch
(OL2)
[mm]
54
62
110
132
151
203
268
336
404
412
465
509
570
664
727
783
849
974
884
1028
938
Average
Weight
[kg]
0.2
0.4
1.0
1.8
2.5
8.7
21
31
50
55
87
103
209
351
476
591
727
1213
1080
760
700
Reducing Tees
Quick-Lock standard
Quick-Lock fabricated
Laying
Length
(LL1)
[mm]
30
64
64
86
86
86
72
89
105
105
88
88
153
153
153
88
88
88
188
188
188
Overall
Length
(OL1)
half run
[mm]
62
110
110
132
132
132
118
135
151
151
138
138
203
203
203
168
168
168
268
268
268
Laying
Length
(LL2)
half run
[mm]
30
57
57
76
76
76
194
194
89
98
221
221
124
134
140
245
246
179
159
172
178
Overall
Length
(OL2)
branch
[mm]
57
84
89
103
108
122
221
226
135
144
248
253
174
184
190
272
278
229
209
222
228
Average
Weight
[kg]
0.6
0.9
1.0
1.6
1.6
1.7
7.5
9.0
2.1
2.3
16.3
21.9
8.0
9.6
9.6
24.6
24.7
24.6
16.0
16.7
13.2
Taper/Taper standard
Taper/Taper fabricated
Laying
Length
(LL1)
[mm]
88
88
88
100
226
226
226
88
88
88
100
264
264
264
264
88
88
88
100
113
272
272
272
272
88
88
88
100
113
295
295
295
295
295
88
88
88
100
113
339
339
339
339
339
88
88
88
100
113
370
370
370
370
370
370
Overall
Length
(OL1)
half run
[mm]
198
198
198
210
336
336
336
228
228
228
240
404
404
404
404
228
228
228
240
253
412
412
412
412
258
258
258
270
283
465
465
465
465
465
258
258
258
270
283
509
509
509
509
509
288
288
288
300
313
570
570
570
570
570
570
Laying
Length
(LL2)
half run
[mm]
272
273
206
206
194
204
213
298
298
232
232
216
229
239
251
313
313
247
247
247
254
264
277
289
338
338
272
272
272
274
283
293
305
315
358
358
292
292
292
316
329
329
330
330
382
382
316
316
316
350
355
355
356
356
365
Overall
Length
(OL2)
branch
[mm]
299
305
256
256
244
254
293
325
330
282
282
266
279
319
361
340
345
297
297
297
304
344
387
429
365
370
322
322
322
324
363
403
445
455
385
390
342
342
342
396
439
469
470
500
409
414
366
366
366
430
465
495
496
526
535
Average
Weight
[kg]
30
30
30
32
29
28
34
35
35
35
37
43
42
45
51
37
37
37
40
43
41
54
62
66
50
50
50
53
56
51
56
63
67
71
54
54
54
58
61
100
104
107
137
143
59
59
59
63
67
175
180
186
188
195
200
Taper/Taper standard
Taper/Taper fabricated
Laying
Length
(LL1)
[mm]
88
88
88
100
113
434
434
434
434
434
88
88
88
100
113
497
497
497
497
497
88
88
88
100
113
532
532
532
532
532
532
88
88
88
100
113
559
559
559
559
559
559
559
Overall
Length
(OL1)
half run
[mm]
318
318
318
330
343
664
664
664
664
664
318
318
318
330
343
727
727
727
727
727
348
348
348
360
373
783
783
783
783
783
783
378
378
378
390
403
849
849
849
849
849
849
849
Laying
Length
(LL2)
half run
[mm]
430
431
364
364
364
405
406
406
428
428
491
491
425
425
425
475
483
483
491
491
516
516
450
450
450
501
501
509
509
517
517
541
541
475
475
475
529
537
537
545
545
553
553
Overall
Length
(OL2)
branch
[mm]
457
263
414
414
414
545
546
576
598
628
518
523
475
475
475
615
655
653
691
721
543
548
500
500
500
641
671
679
709
747
747
568
573
525
525
525
669
707
707
745
775
783
813
Note: Regular numbers are lament wound tees; Italic numbers are fabricated tees.
Average
Weight
[kg]
71
71
71
75
80
211
281
220
239
279
97
97
97
102
107
413
423
428
440
458
103
103
103
109
114
506
516
522
534
555
573
124
124
124
130
136
616
628
633
647
667
689
706
Taper/Taper standard
Taper/Taper fabricated
Laying
Length
(LL1)
[mm]
88
88
88
100
113
624
624
624
624
624
624
88
88
88
100
113
624
624
624
624
624
624
Overall
Length
(OL1)
half run
[mm]
438
438
438
450
463
974
974
974
974
974
974
348
348
348
360
373
884
884
884
884
884
884
Laying
Length
(LL2)
half run
[mm]
591
591
525
525
525
603
603
611
611
618
618
591
591
525
525
525
603
603
611
611
618
618
Overall
Length
(OL2)
branch
[mm]
618
623
575
575
575
773
803
841
841
878
908
618
623
575
575
575
773
803
841
841
878
908
Average
Weight
[kg]
155
155
155
162
168
1035
1052
1082
964
986
1008
145
145
145
152
158
947
975
878
887
909
931
Fabricated Reducing
Tees with Flanged Branch
Quick-Lock
Fabricated reducing tees with integral Quick-Lock (1-4 inch) socket ends for adhesive
bonding and anged branch.
Nominal
Pipe
Size
(runxrunxbranch)
[mm]
50x50x25
80x80x25
80x80x40
80x80x50
100x100x25
100x100x40
100x100x50
100x100x80
[inch]
2x2x1
3x3x1
3x3x1
3x3x2
4x4x1
4x4x1
4x4x2
4x4x3
Laying
Length
(LL1)
half run
[mm]
72
72
89
104
72
89
104
104
Overall
Length
(OL1)
half run
[mm]
118
118
135
150
118
135
150
150
Laying
Length
(LL2)
branch
[mm]
179
193
198
212
225
230
244
245
Average
Weight
with ange
CL150
[kg]
3.2
4.1
5.0
6.6
8.0
9.7
12.0
12.8
Note: Other sizes, or multiple size branched tees available on request. Please contact Ameron.
Fabricated Reducing
Tees with Flanged
Branch (Ctnd)
Taper/Taper
Fabricated reducing tees with integral Taper/Taper (6-36 inch) socket ends and
anged branch.
Nominal
Pipe
Size
(runxrunxbranch)
[mm]
150x150x25
150x150x40
200x200x25
200x200x40
200x200x50
250x250x25
250x250x40
250x250x50
250x250x80
300x300x25
300x300x40
300x300x50
300x300x80
350x350x25
350x350x40
350x350x50
350x350x80
350x350x100
400x400x25
400x400x40
400x400x50
400x400x80
400x400x100
450x450x25
450x450x40
450x450x50
450x450x80
450x450x100
500x500x25
500x500x40
500x500x50
500x500x80
500x500x100
600x600x25
600x600x40
600x600x50
600x600x80
600x600x100
700x700x25
700x700x40
700x700x50
700x700x80
700x700x100
750x750x25
750x750x40
750x750x50
750x750x80
750x750x100
800x800x25
800x800x40
800x800x50
800x800x80
800x800x100
900x900x25*
900x900x40*
900x900x50*
900x900x80*
900x900x100*
900x900x25**
900x900x40**
900x900x50**
900x900x80**
900x900x100**
[inch]
6x6x1
6x6x1
8x8x1
8x8x1
8x8x2
10x10x1
10x10x1
10x10x2
10x10x3
12x12x1
12x12x1
12x12x2
12x12x3
14x14x1
14x14x1
14x14x2
14x14x3
14x14x4
16x16x1
16x16x1
16x16x2
16x16x3
16x16x4
18x18x1
18x18x1
18x18x2
18x18x3
18x18x4
20x20x1
20x20x1
20x20x2
20x20x3
20x20x4
24x24x1
24x24x1
24x24x2
24x24x3
24x24x4
28x28x1
28x28x1
28x28x2
28x28x3
28x28x4
30x30x1
30x30x1
30x30x2
30x30x3
30x30x4
32x32x1
32x32x1
32x32x2
32x32x3
32x32x4
36x36x1
36x36x1
36x36x2
36x36x3
36x36x4
36x36x1
36x36x1
36x36x2
36x36x3
36x36x4
Laying
Length
(LL1)
half run
[mm]
88
88
88
88
88
88
88
88
100
88
88
88
100
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
Overall
Length
(OL1)
half run
[mm]
138
138
168
168
168
198
198
198
210
228
228
228
240
228
228
228
240
253
258
258
258
270
283
258
258
258
270
283
288
288
288
300
313
318
318
318
330
343
318
318
318
330
343
348
348
348
360
373
378
378
378
390
403
438
438
438
450
463
348
348
348
360
373
Laying
Length
(LL2)
branch
[mm]
251
256
275
281
316
302
308
343
343
328
333
369
369
343
348
384
384
384
368
373
409
409
409
388
393
429
429
429
412
417
453
453
453
460
466
501
501
501
521
526
562
562
562
546
551
587
587
587
571
576
612
612
612
621
626
662
662
662
621
626
662
662
662
Average
Weight
with ange
[kg]
18
23
25
26
26
30
31
31
34
35
36
36
39
38
38
39
42
46
50
51
51
55
59
55
55
56
60
64
60
61
61
65
70
71
71
72
77
82
97
98
98
101
110
104
104
105
111
117
124
125
125
132
139
155
159
156
163
170
145
149
146
153
160
Deluge Couplings
Filament-wound deluge couplings with reversed taper bushings with inch or inch
threaded outlets with integral Quick-Lock (2-4 inch) or Taper/Taper (6-12 inch) socket
ends for adhesive bonding.
Nominal
Pipe
Size
[mm]
50
80
100
150
200
250
300
Quick-Lock
Laying
Length
(LL)
[mm]
60
60
60
160
160
160
160
[inch]
2
3
4
6
8
10
12
Overall
Length
(OL)
[mm]
152
152
152
260
320
380
440
Outside
Diameter
(OD)
[mm[
95
126
147
201
251
305
356
Average
Weight
[kg]
1.0
1.3
1.7
4.0
5.4
9.0
11.0
Note:
Taper/Taper
Deluge Saddles
Bushing Saddles
Filament-wound deluge saddles with reversed taper bushings with or inch threaded
outlets
Nominal
Pipe
Size
[mm]
[inch]
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
Angle
[degree]
180
180
180
180
180
180
180
180
Saddle
Length
(B)
[mm]
152
152
152
152
152
152
152
152
Saddle
Thickn.
(ts)
[mm]
14
14
14
14
14
14
14
14
Average
Weight
[kg]
0.6
0.7
0.8
0.9
1.1
1,3
1,6
1,8
[3 Oz]
1
1
1
1
Required
Adhesive
Kits
[6 Oz]
1
1
1
1
Angle
[degree]
180
180
180
180
180
180
180
180
180
90
90
90
Saddle
Length
(B)
[mm]
100
100
100
100
100
100
100
100
100
100
100
100
Saddle
Thickn.
(ts)
[mm]
14
14
14
14
14
14
14
14
14
14
14
14
Average
Weight
[kg]
0.5
0.6
0.8
1
1,2
1,6
1,9
2,1
2,5
3,3
3,7
4,4
[3 Oz]
1
1
1
1
1
1
1
-
Required
Adhesive
Kits
[6 Oz]
1
1
1
1
1
2
1
1
2
45 Laterals
Quick-Lock
Laying
Length
(LL1)
[mm]
64
76
76
99
[inch]
2
3
4
6
Overall
Length
(OL1)
[mm]
110
122
122
149
Laying
Length
(LL2)
[mm]
203
254
305
378
Overall
Length
(OL2)
[mm]
249
300
351
428
Average
Weight
[kg]
1.6
3.0
3.9
12.3
Taper/Taper
45 Reducing
Laterals
Quick-Lock
Overall
Length
(OL1)
[mm]
136
136
136
150
150
Laying
Length
(LL2)
[mm]
264
315
315
378
378
Overall
Length
(OL2)
[mm]
314
365
365
428
428
Laying
Length
(LL3)
[mm]
264
315
315
378
378
Overall
Length
(OL3)
[mm]
314
365
365
426
428
Average
Weight
[kg]
3.2
4.3
5.2
8.2
9.3
Taper/Taper
Flanged Reducing
Saddles
[inch]
2x1
3x1
3x1
3x2
4x1
1x1
4x2
6x1
6x1
6x2
8x1
8x1
8x2
10x1
10x1
10x2
12x1
12x1
12x2
14x1
14x1
14x2
16x1
16x1
16x2
18x1
18x1
18x2
20x1
20x1
20x2
24x1
24x1
24x2
Laying
Length*
(LL)
Saddle
Length
(B)
Saddle
Angle
[mm]
133
133
133
174
152
152
194
187
187
229
206
206
248
232
232
274
264
264
306
279
279
321
305
305
347
330
330
372
356
356
399
406
406
448
[mm]
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
[deg]
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
90
90
90
90
90
90
90
90
90
Average
Weight
with ange
CL150
[kg]
0.9
0.9
1.2
1.9
1.6
1.7
2.4
2.7
2.7
3.3
3.9
3.9
4.5
4.7
4.7
5.3
5.4
5.4
6.0
5.9
5.8
6.4
6.6
6.6
7.2
3.8
3.8
4.4
4.2
4.2
4.8
4.9
4.9
5.5
Concentric Reducers
Quick-Lock
Taper/Taper
[inch]
1x1
2x1
2x1
3x1
3x2
4x2
4x3
6x3
6x4
8x4
8x6
10x6
10x8
12x8
12x10
14x10
14x12
16x12
16x14
18x16
20x16
20x18
24x16
24x18
24x20
28x16
28x18
28x20
28x24
30x16
30x18
30x20
30x24
30x28
32x16
32x18
32x20
32x24
32x28
32x30
36x18
36x20
36x24
36x28
36x30
36x32
36x18
36x20
36x24
36x28
36x30
36x32
Laying
Length
(LL)
Overall
Length
(OL)
Average
Weight
[mm]
32
64
32
76
54
76
73
117
124
163
129
148
135
180
167
214
208
195
183
128
249
151
486
388
267
796
698
577
340
915
817
696
459
149
1038
940
819
582
272
153
1186
1065
828
518
399
276
1186
1065
828
518
399
276
[mm]
91
137
110
154
146
168
165
217
224
293
259
308
325
400
417
464
488
505
493
468
619
521
886
788
697
1196
1098
1007
800
1345
1247
1156
949
639
1498
1400
1309
1102
792
703
1706
1615
1408
1098
1009
916
1616
1525
1318
1008
919
826
[kg]
0.2
0.3
0.5
0.5
0.5
1.1
0.9
1.5
1.8
4.3
4.3
6.2
6.9
9.9
10.8
17.0
16.8
22
23
27
36
35
70
70
70
141
140
142
142
177
175
177
177
165
216
214
217
217
203
207
358
362
361
300
304
307
314
314
268
261
265
269
Eccentric Reducers
Quick-Lock
Taper/Taper
[inch]
1x1
2x1
2x1
3x1
3x2
4x2
4x3
6x3
6x4
8x4
8x6
10x6
10x8
12x8
12x10
14x10
14x12
16x12
16x14
18x14
18x16
20x16
20x18
24x16
24x18
24x20
28x16
28x18
28x20
28x24
30x16
30x18
30x20
30x24
30x28
32x24
32x28
32x30
36x24
36x28
36x30
36x32
36x24
36x28
36x30
36x32
Laying
Length
(LL)
[mm]
56
100
44
150
108
200
93
320
230
415
215
420
235
420
220
340
150
335
215
365
180
365
215
725
575
390
1195
1045
860
500
1380
1235
1050
690
220
875
405
220
1250
780
590
405
1250
780
590
405
Overall Eccentricity
Length
(OL)
(X)*
[mm]
[mm]
115
7
173
13
122
6
228
20
200
14
292
27
185
12
420
38
330
27
545
52
345
25
580
52
425
27
640
52
470
25
590
41
430
16
645
41
525
25
675
45
520
20
735
45
585
25
1125
93
975
73
820
48
1595
156
1445
136
1290
111
960
63
1810
181
1665
161
1510
136
1180
88
710
25
1395
113
925
50
770
25
1830
163
1360
100
1200
75
1045
50
1740
163
1270
100
1110
75
955
50
Maximum
Working
Pressure
[bar]
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
Average
Weight
[kg]
0.2
0.3
0.5
0.5
0.5
1.1
0.9
9.8
5.3
11.1
9.0
9.6
10
29
11
27
22
61
22
23
90
87
75
115
90
142
416
153
223
191
259
205
186
134
96
178
142
118
284
260
243
271
204
180
163
191
Heavy-Duty Flanges
Quick-Lock
Taper/Taper
Orice anges
[mm]
25
40
50
80
100
150
200
250
300
350
400
450
500
600
[inch]
1
1
2
3
4
6
8
10
12
14
16
18
20
24
Laying
Length
(LL)
Overall
Length
(OL)
[mm]
3
3
5
5
5
5
6
6
6
6
6
6
6
6
[mm]
29
35
51
51
51
55
86
116
116
116
146
146
176
206
ANSI
B16.5
CL.150
[kg]
0.5
1.1
1.3
1.8
2.8
3,7
8,4
14,3
21
25
38
41
58
87
Average weight
ANSI
DIN
B16.5
2633
CL.300
PN16
[kg]
[kg]
0.6
0.5
1.1
1.0
1.7
1.8
2.6
2.4
3.8
2.7
5.5
4.2
11.9
8.3
20
14.5
27
17.3
35
23
52
35
63
43
82
61
135
100
Note:
Full-face elastomeric gaskets may be used suitable for the service pressure, service
temperature and uid. Shore A durometer hardness of 60 5 is recommended (3 mm thick).
Compressed bre gaskets (3 mm thick), compatible with pressure, temperature and medium
may also be used. Mechanical properties should be in accordance with DIN 3754 (IT 400)
or equal;
A torque-wrench must be used, since excessive torque may result in ange damage.
Filament-wound orice anges, ANSI B16.5 Class 150 drilling, with integral Quick-Lock
(2-4 inch) or Taper/Taper (6-24 inch) socket ends for adhesive bonding.
Nominal
Pipe
Size
[mm]
50
80
100
150
200
250
300
350
400
450
500
600
[inch]
2
3
4
6
8
10
12
14
16
18
20
24
Laying
Length
(LL)
[mm]
40
39
39
54
55
55
55
55
55
55
55
55
Overall
Length
(OL)
[kg]
86
85
85
104
135
165
165
165
195
195
225
255
Average
Weight
Flange (CL150)
[kg]
2.2
3.0
4.7
8.5
14.7
23
40
44
50
57
75
118
Note:
Flanges with 1/2 NPT female thread, 316 SS nipple and bushing;
Stub-ends
Quick-Lock
Taper/Taper
Laying
Length
(LL)
[mm]
10
10
10
10
10
15
15
15
15
15
20
20
20
20
20
20
20
20
20
20
20
Overall
Length
(OL)
[mm]
37
42
56
56
56
65
95
125
155
155
190
190
220
250
250
280
310
370
280
250
340
Face
Diameter
(RF)
[mm]
51
73
92
127
157
216
270
324
378
413
470
532
580
674
800
850
900
1000
1000
1100
1100
Ring
to Face
(H)
[mm]
10
10
10
10
16
13
20
23
26
27
32
35
39
47
51
46
48
53
53
69
69
Average
Weight
Stub-end
[kg]
0.1
0.2
0.2
0.4
0.6
1.3
2.6
4.0
5.9
5.8
9.6
16.1
19.8
22
26
29
34
41
36
44
37
Note:
Flat faced stub-ends can be sealed using reinforced elastomeric, compressed ber or steel
reinforced rubber gaskets, depending on size;
Make sure that when using O-ring sealed stub-end, its counter ange is compatible, e.g. use a
at faced stub-end (without O-ring groove) or another at surface ange as counter ange.
Nominal
ANSI
Pipe
B16.5
Size
CLASS.150
(D)
[mm] [inch] [mm]
25
1
14.3
40
1
17.5
50
2
19.0
80
3
23.8
100
4
23.8
150
6
25,5
200
8
28,8
250 10
35,6
300 12
40
350 14
41,6
400 16
47,9
450 18
50,2
500 20
52
600 24
63,7
700 28
69
750 30
71,6
800 32
76,9
900 36
85,4
1000 40
94
Average
Weight
[kg]
0.8
1.2
1.8
3.2
4.2
5,2
8,5
13,5
23
32
42
40
51
86
100
117
154
197
303
ANSI
B16.5
CLASS.300
(D)
[mm]
17.5
20.6
22.2
28.6
28.6
36.5
41.3
47.6
50.8
54
58.2
63.6
66.5
78.4
95
99.9
106
117.7
103
Average
Weight
[kg]
1.3
2.3
2.5
4.8
7.0
12.2
18.3
26
39
56
70
87
104
183
213
229
289
424
439
Note:
Ring anges will standard be made from galvanised steel. Other materials are available on
request;
Blind anges
Flange
Thickness
(D)
[mm]
25
25
30
30
35
40
45
50
60
65
70
70
70
85
85
90
100
85
ANSI B16.5
CLASS 150
[kg]
0.4
0.5
0.7
1.1
1.7
2,2
4,2
5,9
10,5
14,1
20
36
44
65
91
110
135
175
Average Weight
ANSI B16.5
7005.2
CLASS 300
PN 16
[kg]
[kg]
0.5
0.5
0.9
0.8
1.2
1.2
1.9
1.7
3.6
2.7
2.9
2.3
5.7
4.1
7.8
5.7
13.3
9.5
16.9
13.4
23.6
18.8
45.0
36.7
54.1
46.0
82.3
69.4
118.0
87.7
135.3
106.7
158.0
126.1
206.5
162.8
Couplings
Quick-Lock
Taper/Taper
[inch]
1
1
2
3
4
6
8
10
12
14
16
18
20
24
28
30
32
36
36
40
40
Laying
Length
(LL)
[mm]
10
10
10
10
10
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
Overall
Length
(OL)
[mm]
64
74
102
102
102
170
230
290
350
350
410
410
470
530
530
590
650
770
590
710
530
Outside
Diameter
(OD)
[mm]
42
58
72
100
129
180
230
286
350
381
430
460
524
619
745
795
840
951
945
1065
1055
Average
Weight
[kg]
0.1
0.1
0.3
0.4
0.6
1.5
2.5
4.0
9.8
10.5
13.2
9.0
21
24
31
34
32
50
41
86
52
Nipples
Quick-Lock
Taper/Taper
[inch]
1
1
2
3
4
6
8
10
12
14
16
18
20
24
28
30
32
36
36
40
40
Laying
Length
(LL)
[mm]
57
67
95
95
95
125
190
250
320
320
380
400
460
520
520
580
640
760
580
700
520
Gap
*
Average
Weight
[mm]
3
3
3
3
3
25
30
30
40
40
40
60
60
60
60
60
60
60
60
60
60
[kg]
0.1
0.1
0.1
0.1
0.2
0.3
0.7
1.3
2.4
3.0
4.6
5.6
8.3
13.3
19.7
26
30
39
31
54
35
*
Remaining gap after bonding (is distance between the edges of the socket ends);
** For Bondstrand 2416 only;
*** For Bondstrand3416 only.
Transition Nipples
Support Saddles
ts B=100mm
Kits
B=150mm
[mm] [inch] [degree] [mm]
[kg]
[3 and 6 Oz]
[kg]
25
1
180
14
0.2
0.3
40
1
180
14
0.3
0.5
50
2
180
14
0.4
0.6
80
3
180
14
0.5
0.8
100
4
180
14
0.7
1.1
150
6
180
14
0.9
1
1.4
200
8
180
14
1.1
1
1.7
250
10
180
14
1.5
1
2.3
300
12
180
14
1.8
1
2.7
350
14
180
14
2
1
3.0
400
16
180
14
2.4
1
1
3.6
450
18
180
16
3.2
500
20
180
16
3.6
600
24
180
16
4.3
700
28
180
16
5.1
750
30
180
16
5.5
800
32
180
16
5.8
900
36
180
16
6.5
1000
40
180
16
7.1
Required
Adhesive
Kits
[3 and 6 Oz]
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
2
3
4
5
Note:
Filament-wound support saddles are intended for protection of pipe at supports and clamps,
as well as for anchoring purposes;
Wear saddles are standard 90. 90 saddle weights are 50% of value shown.
Grounding saddles
[inch]
1
1
2
3
4
6
8
10
12
14
16
18
20
24
28
30
32
36
40
Saddle
Angle
[degree]
90
90
90
90
90
90
45
45
45
45
45
22,5
22,5
22,5
22,5
22,5
22,5
22,5
22,5
Saddle
Length
B
[mm]
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
Saddle
Thickness
ts
[mm]
14
14
14
14
14
14
14
14
14
14
14
16
16
16
16
16
16
16
16
Average
Saddle
Weight
[kg]
0.1
0.1
0.1
0.1
0.2
0,3
0,2
0,2
0,2
0,3
0,3
0,2
0,2
0,3
0,3
0,4
0,4
0,4
0,5
Required
Adhesive
Kits
[3Oz]
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Note:
Saddles are supplied with integrated stainless steel cable with a length of 610 mm.
Adhesive
Number of Adhesive Kits per joint with integral Quick-Lock (1-4 inch) or
Taper/Taper (6-40 inch) socket ends for adhesive bonding.
Nominal
Pipe
Size
[mm]
25
40
50
80
100
150
200
250
300
350
400
450
500
600
700
750
800
900*
900**
1000*
1000**
*
**
[inch]
1
1
2
3
4
6
8
10
12
14
16
18
20
24
28
30
32
36
36
40
40
[cm3]
89
89
89
89
89
89
89
177
177
177
177
177
177
177
177
177
177
177
177
177
177
Required
Adhesive Kit
Size
[Oz]
3
3
3
3
3
3
3
6
6
6
6
6
6
6
6
6
6
6
6
6
6
Minimum number
of Adhesive Kits
required per joint
nr.
/3
/3
1
1
1
2
2
2
3
3
4
5
6
7
6
7
5
Note:
Adhesive Kits should never be split. If remainder is not used for other joints made at the
same time, the surplus must be discarded;
Required adhesive for saddles is shown in the dimension table of the respective saddles;
For type of adhesive to be used, please refer to the Bondstrand Corrosion Guide;
Quick-Lock and Taper/Taper adhesive bonded joints require different types of adhesive.
Ameron 2006. FP 943-16 04/06. Page 23 of 24. Printed in The Netherlands.
Consult de following literature for recommendations about design, installation and use of
Bondstrand pipe, ttings and anges:
Assembly Instructions for Quick-Lock adhesive-bonded joints
Assembly Instructions for Taper/Taper adhesive-bonded joints
Assembly Instructions for Bondstrand berglass anges
Bondstrand Corrosion Guide for berglass pipe and tubing
Bondstrand Pipe Shaver Overview
Bondstrand Marine Design Manual
FP 170
FP 564
FP 196
FP 132
FP 599
FP 707
Please consult Ameron for the latest version of the above mentioned literature.
Field testing
Bondstrand pipe systems are designed for hydrostatic testing with water at 150% of
rated pressure.
Surge pressure
Conversions
1 psi
1 bar
1 MPa
1 inch
1 Btu.in/ft2hF
C
Important notice
This product literature and the recommendations for usage it contains are based on
test data reasonably believed to be reliable. It is intended that this literature be used by
personnel having specialised training in accordance with currently acceptable industry
practice and normal operating conditions. Variation in environment, changes in operating
procedures, or extrapolation of data may cause unsatisfactory results. We recommend
that your engineers verify the suitability of this product for your intended application.
Since we have no control over the conditions of service, we expressly disclaim
responsibility for the results obtained or for any consequential or incidental damages of
any kind incurred.
= 6895 Pa
= 105Pa
= 1 N/mm2
= 0.07031 kg/cm2
= 14.5 psi
= 1.02 kg/cm2
= 145 psi
= 10.2 kg/cm2
= 25.4 mm
= 0.1442 W/mK
= 5/9 (F-32)
Group Headquarters
Ameron International - Fiberglass-Composite Pipe Division
9720 Cypresswood Drive, Suite 325 - Houston, Texas 77070 - U.S.A.
Phone: +1 832 912 8282 - Fax: +1 832 912 9393
E-mail: marcom@ameronfpd.com - Website: http://www.ameron.com
U.S.A.
Ameron International
1004 Ameron Road
P.O. Box 878
Burkburnett, Texas 76364
U.S.A.
Phone: +1 940 569 1471
Fax: +1 940 569 2764
U.S.A.
Centron International, Inc.
P.O. Box 490
600 FM 1195 South
Mineral Wells - Texas 76068
U.S.A.
Phone: +1 940 325 1341
Fax: +1 940 325 9681
E-mail: info@centrongre.com
Website: http://www.centrongre.com
Europe
Ameron B.V.
Fiberglass-Composite Pipe
P.O. Box 6
4190 CA Geldermalsen
The Netherlands
Phone: +31 345 587 587
Fax: +31 345 587 561
E-mail: info@ameron-fpg.nl
Website: http://www.ameron-fpg.nl
Asia
Ameron (Pte) Ltd
No. 7A, Tuas Avenue 3
Jurong
Singapore 639407
Phone: +65 6861 6118
Fax: +65 6862 1302/6861 7834
E-mail: info@ameron.com.sg
Website: http://www.ameron.com.sg