Beruflich Dokumente
Kultur Dokumente
PT-36 Torch
The PT-36 Plasmarc Torch features a robust design with high precision torch parts and unique patented features that help operators get the most from every setup.
Power Supply
The EPP-202 Precision Plasmarc power supply provides reliable, efficient output power with fast and accurate current control for the most demanding plasma applications. Features include: High-speed data bus controller allows precise control of plasma current and better diagnostics from the machine CNC. Integrated water cooler reduces installation and floor space requirements Innovative water cooled power block provides better cooling and longer component life. High Output Voltage Capacity for better bevel cutting. Rated for 100% duty cycle at 200 Amp output Fast switching between cutting and marking modes Efficient, high-power factor design
TM
Specifications
m3 200 Amp System Output Range (Cutting) Output Range (Marking) Open Circuit Voltage Dimensions 30 to 200 Amps 10 to 36 Amps 360 VDC 61 x 104 x 120 cm (24 x 41 x 47 in.)
Stainless Steel
Thickness (mm) 1 3 Speed (mm/min) 7000 3700 6000 1700 4400 4700 1100 2600 900 2200 1190 1770 750 1350 510 770 350 305 0.375 0.500 0.625 0.750 1.000 1.250 1.500 0.250 Thickness (inch) 0.040 0.125 Speed (in/min) 275 140 225 65 165 175 45 105 35 85 47 70 30 55 20 30 14 12 Current (amps) 70 60 125 100 150 200 100 200 130 200 200 200 200 200 200 200 200 200 Cut/Shield Gases N2-N2 F5-N2 N2-H20 F5-N2/CH4 Air-Air N2-H20 F5-N2/CH4 Air-Air H35-N2 Air-Air N2-N2 Air-Air H35-N2 Air-Air H35-N2 N2-N2 H35-N2 H35-N2
Aluminum
Thickness (mm) 1 3 Speed (mm/min) 6100 4300 5600 2000 6 3700 4000 10 12 16 20 25 32 38 1900 2700 2200 2200 1650 1570 1100 1000 1000 1150 630 500 0.375 0.500 0.625 0.750 1.000 1.250 1.500 0.250 Thickness inch 0.040 0.125 Speed (in/min) 240 160 210 75 140 150 75 110 85 85 65 62 45 40 40 45 25 20 Current (amps) 35 50 60 60 150 200 100 200 200 200 150 200 150 200 200 200 200 200 Cut/Shield Gases N2-N2/CH4 N2-N2 N2-N2/CH4 N2-N2/CH4 Air-Air N2-H20 N2-N2 Air-Air N2-N2/CH4 Air-Air Air-Air N2-N2 Air-Air N2-N2 Air-Air N2-N2/CH4 N2-N2/CH4 N2-N2/CH4
Plasma Marking
Material Marking Type Text Carbon Steel Line Text Stainless Steel Line Nozzle (amps) 30 - 200 Marking Speed (mm/min) 2500 (in/min) 100 200-400 100 300-400
70 - 200 7600-10000
Notes: 1. These charts are only a sampling of the numerous cutting conditions available with the m3 plasma system. For brevity, many available cutting conditions are not shown. 2. All statements and data apply to m3 plasma Generation 2 systems with a PT-36 torch and EPP Power Supply. 3. Cutting speeds are dependent on the material type and grade, gas pressure, gas combination, as well as the consumables selected. 4. Specifications are subject to change without notice. Please contact ESAB Cutting Systems for the most current specifications, numerical control, and available equipment. 5. Mark and shield gases: Ar-Air.
facebook.com/esabna
twitter.com/esabna
youtube.com/esabweb
MCUT-3082 08/2013