Beruflich Dokumente
Kultur Dokumente
TECHNICAL NOTE
Page 1 of 4
Page 2 of 4
Page 3 of 4
the Class item is set to K Overlap. The items associated with overlapping joints are L2, L1 / L, and Weld Thick, Vwa, and PhiWeld and apply only to the API codes. (Note that Vwa is applicable only when the steel design code is API RP2A-WSD2000 and PhiWeld is applicable only when the steel design code is API RP2A-LRFD 97.) If the Type and Angle items are not user defined, they are automatically calculated by the program, and they are automatically updated every time a change is made to the punching load assignments. Thus, in some cases, changing a single item in the Joint Check Parameters area may cause other items to change as the program automatically recalculates the Type and Angle items.
Page 4 of 4