Beruflich Dokumente
Kultur Dokumente
TRAINING MANUAL
71-70-03
TRAINING MANUAL
DESCRIPTION The engine system is equipped with rigid and flexible pipelines to ensure that fluids which may leak do not remain in enclosed spaces but are collected and carried out to the aircraft outside. Engine drains can be identified as: Drains from components/areas which could leak (engine bay floor, FMM seal, oil cap scupper, starter seal, output shaft seal, combustor drain valves) Drains which carry out fluids as normal operation (fuel return to tank, oil breather) Drains used only for oil replacement (oil tank, AGB).
71-70-03
AGUSTA AB 139
TRAINING MANUAL
71-70-03
AGUSTA AB 139
ENGINE BAY FLOOR There are six holes in the engine bay floor which are connected with a rigid pipeline leading to a drain located under the main cabin rear end.
TRAINING MANUAL
71-70-03
AGUSTA AB 139
TRAINING MANUAL
71-70-03
AGUSTA AB 139
FMM SEAL Leaks are collected using a flexible hose leading to a single drain located under the main cabin rear end. OIL CAP SCUPPER AND STARTER SEAL Leaks are collected using a flexible hose leading to a single drain located under the main cabin rear end. FUEL RETURN TO TANK The fuel coming from fuel nozzles at the engine shutdown is collected using a flexible hose leading to the top side of the fuel tank. COMBUSTOR DRAIN VALVES Fuel coming from the combustor liner in case of engine false start is collected using a flexible hose leading to a single drain located under the main cabin rear end. OIL BREATHER Air coming from the air/oil separator in the engine AGB is collected using a rigid pipeline leading outside the engine fireseal.
TRAINING MANUAL
71-70-03
AGUSTA AB 139
TRAINING MANUAL
71-70-03
AGUSTA AB 139
OUTPUT SHAT CARBON SEAL Leaks are collected using a rigid pipeline located under the main cabin in front of the landing gear sponson.
TRAINING MANUAL
71-70-03
AGUSTA AB 139
TRAINING MANUAL
71-70-03
AGUSTA AB 139
TRAINING MANUAL
71-70-03
AGUSTA AB 139
OIL TANK DRAIN AND AGB DRAIN Oil tank and AGB drain are located under the engine oil tank and AGB. They are used in case of oil replacement and are not interfaced with the airframe.
TRAINING MANUAL
71-70-03
AGUSTA AB 139
TRAINING MANUAL
71-70-03
AGUSTA AB 139
TRAINING MANUAL
71-70-03
AGUSTA AB 139
TRAINING MANUAL
71-70-03
AGUSTA AB 139
TRAINING MANUAL
71-70-03
AGUSTA AB 139
TRAINING MANUAL
71-70-03
AGUSTA AB 139
TRAINING MANUAL
71-70-03
AGUSTA AB 139
TRAINING MANUAL
71-70-03