Beruflich Dokumente
Kultur Dokumente
The Extron CrossPoint 300 Series matrix switchers route RGBHV video, with or without audio (depending on the model), to any combination of outputs. The switchers can route multiple input/output configurations simultaneously.
Operations (Continued)
View ties
1. Press the View button. All of the LEDs for outputs that are not tied light. NOTE If the audio LED blinks, audio is broken away (switched separately from video). NOTE If an output LED blinks, that output is muted. To toggle mute on and off, press and hold the output button for 2 seconds. 2. Press an input button. The LEDs for all tied outputs light. If no output LEDs light, no outputs are tied. 3. Press an output button. The LEDs for the tied input and all tied outputs light. 4. Press the View button. All input and output LEDs go out.
Unbalanced Inputs
Tip Sleeve Tip Sleeve
Tip Ring Sleeve(s) Tip Ring
Balanced
L R
Save a preset
2 seconds
PRESET
Press and hold.
PRESET
Unbalanced Outputs
Tip
NO GROUND. NO GROUND.
Balanced
Tip Ring Sleeve(s) Tip Ring
1
L R
Sleeve(s) Tip
PRESET
PRESET
CAUTION Do not connect the sleeves to either the + or - terminal. Wiring errors or plugging the audio connectors incorrectly can damage the audio output circuits.
Operations
Create tie(s)
1. Press the Esc button. 2. HVA models: Press the RGBHV and/or Audio button to select video and/or audio. 3. Press the desired input button. 4. Press the desired output button(s).
= lit, = unlit, 2. Press the appropriate input button to select the desired preset INP number. Press to select preset 5. 3. Press the Enter button. All input LEDs and the Enter LED go out. 4 5 6 The current configuration is saved at the selected preset location.
= blinking
The LEDs light when video and/or audio is selected. Press the buttons.
RGBHV AUDIO
REMOTE
1 5
6 9
The LED blinks to indicate that this preset is selected to save or recall.
The Enter LED blinks to indicate the need to activate the save or recall.
NOTE If you push a wrong button, press the Esc button and start over.
Press and release the input button.
INP 6
7. Remote port connection If desired, connect a control system or computer to the front panel Configuration (RS-232) port. Use an optional 9-pin D to 2.5 mm mini jack TRS RS-232 cable, part #70-335-01. 8. Power Connect an IEC AC power cord.
Definitions
Tie An input-to-output connection Set of ties An input tied to two or more outputs Configuration One or more ties or sets of ties Current configuration The currently active configuration (also configuration 0) Global preset A configuration that has been stored. Up to 32 global memory presets can be stored in memory. Up to 20 or 32 preset locations (depending on the number of input and output buttons) can be selected from the front panel to either save or retrieve a preset. When a preset is retrieved from memory, it becomes the current configuration.
3 4 OUTPUTS
ENTER
2. Press and release the desired input button or output button. Press an input button to adjust that inputs audio level. The output LEDs display the gain or attenuation level. The more lit or blinking LEDs, the greater the level. The View ( ) and Esc ( ) LEDs show gain (+) and attenuation (). Press an output button to adjust that outputs volume. The input LEDs display the volume level. The more lit or blinking LEDs, the greater the volume. Refer to the CrossPoint 300 Switcher User's Manual, chapter 3, Operation, to read the audio displays.
Press and release an input or output button. Output LEDs display the selected input's gain or attenuation. Input LEDs display the selected outputs volume level. Esc ( ) indicates gain (+).
= lit,
= unlit,
= blinking
The LEDs blink to indicate that the selected input will be tied to these outputs.
The Enter LED blinks to indicate the need to save the tie.
1 4
The input LED lights.
VIEW
ESC
ENTER
3. Press and release the View ( ) and Esc ( ) buttons to decrease or increase the audio level for the selected input by 1 dB The LEDs for video Press the per push of the button. and audio selection
www.extron.com
135 Joo Seng Rd. #04-01 PM Industrial Bldg., Singapore 368363 +800.7339.8766 +65.6383.4400 FAX +65.6383.4664
N15779
Kyodo Building, 16 Ichibancho Chiyoda-ku, Tokyo 102-0082 Japan +81.3.3511.7655 FAX +81.3.3511.7656
4. Press and release the Audio button to save changes and exit Audio mode.
button.
both light.
33-1106-01 C 06 07
AUDIO
RGBHV
AUDIO