0%(1)0% fanden dieses Dokument nützlich (1 Abstimmung)
283 Ansichten1 Seite
The document provides instructions for attaching lace trim to the front of a sailor dress. It describes stitching the trim to the triple layer of the dress bodice along one side and across the top, trimming the seam, turning right sides out, and attaching a piece of entredeux lace edging to the trim with a zigzag stitch. It further details folding the entredeux/lace edging and attaching it to the dress front inset with zigzags, then stitching the inset in place on the bodice front.
The document provides instructions for attaching lace trim to the front of a sailor dress. It describes stitching the trim to the triple layer of the dress bodice along one side and across the top, trimming the seam, turning right sides out, and attaching a piece of entredeux lace edging to the trim with a zigzag stitch. It further details folding the entredeux/lace edging and attaching it to the dress front inset with zigzags, then stitching the inset in place on the bodice front.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als PDF, TXT herunterladen oder online auf Scribd lesen
The document provides instructions for attaching lace trim to the front of a sailor dress. It describes stitching the trim to the triple layer of the dress bodice along one side and across the top, trimming the seam, turning right sides out, and attaching a piece of entredeux lace edging to the trim with a zigzag stitch. It further details folding the entredeux/lace edging and attaching it to the dress front inset with zigzags, then stitching the inset in place on the bodice front.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als PDF, TXT herunterladen oder online auf Scribd lesen
all the way up one side, across top edge keeping straight stitches right up next to zigzagged lace heading, and down opposite side, stopping approximately 2 inches from bottom (g. 15). 6. Trim seam allowances down to 8 inch and trim out corners
7. Turn right sides out, through
bottom opening; press well. 8. Trim batiste seam allowance completely away from one side of a 7-inch piece of entredeux. 9. Right sides up, zigzag (W=2.0; L=1.0) a 7-inch piece of 3 8 -inch lace edging to holes of entredeux (g. 16). 10. Trim other seam allowance completely away. 11. Fold entredeux/lace edging back on itself at each end and press. Entredeux strip should be same length as top edge of inset. Trim fold backs to inch each. 12. Zigzag entredeux edge (W=2.0; L=1.0) to top of lace on front inset. The fold back at each end of inset will face to right side. 13. Close opening at side of front inset with a zigzag (W=2.5; L=1.5) . 14. With pins, mark off a 58 -inch line along both sides of front inset (g. 17). 15. Position front inset to inside of bodice front with entredeux touching marked circles. Pin line marked on front inset should restalong nished collar edge, and front inset will extend beyond bottom edge of bodice front. 16. Fold collar back out of the way and topstitch inset to bodice front close to nished edge. Stop stitching at point where lace from collar, once folded into nished position, will no longer cover the stitching 17. Trim off organza from front inset so that it is even with bottom of bodice front (g. 18).
Where to find it...
Lacy sailor dress pattern, layout and yardage chart and continued instructions can be found on the pullout centerfold.