Beruflich Dokumente
Kultur Dokumente
Project Name: Location (City, State): FALSE UNITS Prepared For: Date Prepared: Engineer: Contractor: Regional Engineer: FALSE Area Sales Representative: Surface Application:
TIP! Based on a lay length of 19'-8" (6-m). Check with local representative or plant for more precise Approx. Length lay lengths. of End Stick
Enter or Select values in the Yellow fields ONLY Unit of Measure Joint Type Design Storage Volume Average Cover Height4
Metric (mm, m)
ST
HEADER
LATERALS
TIP! Lateral Lateral TIP! TIP! 1 - Header on one side of Diameter Length Number of Not sure what diameter on the Groups indicate separate system only pipe? Click 60 (in)systems Laterals "Conversions Info" tab to viewsides a table listing the but(ft) will be included in 2 -& Headers on both approximate length of pipe need to meet strorage Design Storage Volume together of system 2 Group 1 60 114 2 requirements.
BACKFILL
Header Diameter Number of Headers Perforate Headers? Include Header(s) in Storage Volume?
60 2 No No No No
# of Sticks / Lateral 6 0 0
Group 2 Group 3
60 6060 6060
To see the approximate stone % linear length, no storage40 volume per click on "Conversions & Info" tab. *Enter "0" to not include the backfill in the storage volume
in.
TIP! Estimated by subtracting the interior volume of the pipe from the Excavation estimate
Perforate Laterals? STORAGE VOLUME COMPONENT Product Volume (CF) 4,402 0 0 4,402
No No EXCAVATION Width Length TIP! Diameter For systems with a header on one side only, the footprint is based on an (IN) (FT) and gasketed (FT) average length of belled stubs on 60the headers. 16 130 60 60 0 0 0 0 Pipe Disturbed Surface Area (SYD) 232 0 0 232 Excavation2 (CYD) 619 0 0 619 Estimated Backfill3 (CYD) 456 0 0 456 ASV
Total TIP! TIP! Stone ASV Includes Includes storage fromSystem Pipes stone storage Width
and from Headers, from if Pipes and from (CF) selected above. (CF) Headers, (CF) (FT) if selected above.
0 0 0 0
0 0 0 0
4,402 0 0
13 0 0
(CYD) 0 0 0 0
4,402.47
This Excel spreadsheet isprovided for rough estimating purposes only. This tool is intended to assist the design engineer in sizing stormwater management systems using ADS pipe and manifold components. As with any calculation aid, this tool should be used for estimating only; the engineer must verify the assumptions and methods to ensure they satisfy the project and local design criteria.
QUANTITIES
Approx Quantity of Pipe Needed for DSV ID 12-in (300-mm) 15-in (375-mm) 18-in (450-mm) 24-in (600-mm) 30-in (750-mm) 36-in (900-mm) 42-in (1050-mm) 48-in (1200-mm) 54-in (1350-mm) 60-in (1500-mm) ft (m) 5,410 1,649 3,559 1,085 2,465 751 1,387 423 887 270 616 188 466 142 352 107 274 83 226 69
PIPE PROPERTIES
TIP! Information This tablePipe provides the total length of pipe needed OD/ in order to store the Width Volume volume of water entered on the in Design Sheet. This will aide in cf/lf estimating the number of ID (mm) and length (m3/m) laterals. 12-in 14.2 0.81
BACKFILL PROPERTIES
40% cf/lf (m3/m) 0.85 (0.08) 1.06 (0.10) 1.40 (0.13) 1.91 (0.18) 3.07 (0.29) 4.20 (0.39) 5.76 (0.53) 6.73 (0.62) 7.74 (0.72) 8.49 (0.79) Stone Porosity 35% 30% cf/lf (m3/m) 0.74 (0.07) 0.93 (0.09) 1.22 (0.11) 1.67 (0.16) 2.69 (0.25) 3.68 (0.34) 5.04 (0.47) 5.89 (0.55) 6.77 (0.63) 7.42 (0.69) cf/lf (m3/m) 0.63 (0.06) 0.79 (0.07) 1.05 (0.10) 1.43 (0.13) 2.31 (0.21) 3.15 (0.29) 4.32 (0.40) 5.05 (0.47) 5.80 (0.54) 6.36 (0.59)
INSTALLATION RECOMMENDATIONS
Pipe Diameter ID 12-in (300-mm) 15-in (375-mm) 18-in (450-mm) 24-in (600-mm) 30-in (750-mm) 36-in (900-mm) 42-in (1050-mm) 48-in (1200-mm) 54-in (1350-mm) 60-in (1500-mm) Bedding Depth in (mm) 4 (102) 4 (102) 4 (102) 4 (102) 4 (102) 4 (102) 6 (152) 6 (152) 6 (152) 6 (152) Dist. From Pipe OD to Trench Wall in (mm) 12 (305) 12 (305) 12 (305) 12 (305) 18 (457) 18 (457) 18 (457) 18 (457) 18 (457) 18 (457)
(300-mm) 15-in (375-mm) 18-in (450-mm) 24-in (600-mm) 30-in (750-mm) 36-in (900-mm) 42-in (1050-mm) 48-in (1200-mm) 54-in (1350-mm) 60-in (1500-mm)
(361) 17.7 (450) 21.5 (546) 28.4 (721) 35.5 (902) 41.4 (1052) 48.0 (1219) 54.0 (1372) 61.0 (1549) 67.3 (1709)
(0.07) 1.22 (0.11) 1.78 (0.17) 3.16 (0.29) 4.91 (0.46) 7.07 (0.66) 9.35 (0.87) 12.36 (1.15) 15.90 (1.48) 19.31 (1.79)
CONVERSIONS
Only enter values in the YELLOW fields
0.1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Acre-feet Cubic- Feet Cubic- Feet Gallons Gallons per Day Gallons per Minute Cubic-Feet per Second Cubic-Feet per Second Feet of Water Cubic Feet Cubic Yards Sqaure Feet Square Yard Square Inches Square Feet
equals equals equals equals equals equals equals equals equals equals equals equals equals equals equals
4356 Cubic Feet 2.30E-005 Acre-Feet 7.481 Gallons 0.133672 Cubic-Feet 1.55E-006 Cubic-Feet per Second 0.0022279 Cubic-Feet per Second 448.86 Gallons per Minute 646358.4 Gallons per Day 0.4335 PSI 0.037037 Cubic Yards 27 Cubic Feet 0.1111111 Square Yard 9 Sqaure Feet 0.0069444 Square Feet 144 Square Inches
Error: When trying to select values from the drop-down boxes or trying to click a bottom, nothing happens (e.g. the drop-down list is not shown or the box/button is highlighted). Solution: Security settings in Excel may be set too high. Follow the steps below to check your settings. 1. In Excel, go to the Tools menu, then Options.
2. Click on the Security tab and click on Macro Security at the bottom of the page.
3. This window will Macro security levels; if not already set at Medium, change the settings to Medium and select OK to exit all windows. If already set at Medium (or Low), the error you are encountering while using the spreadsheet is not related to the security settings.
QUOTATION
TO PLACE ORDERS: PH: 800-733-9987 FAX: 800-733-1974 JOB NAME:, GROUP 1 LOCATION: CUSTOMER: 0 COUNTY: Page 1 of 1 ____________________ ____________________ Ph: _________________ Fax:_________________ October 8, 2013
BID DATE:
PRICES QUOTES ARE BASE ON THE TOTAL PROJECT. ADS RESERVES THE RIGHT TO RE-QUOTE WHEN THE QUANTITIES CHANGE MORE THAN 10%. SPECIFIC PRODUCTS SUCH AS NYLOPLAST DRAIN AND CATCH BASINS, FABRICATED FITTINGS, AND SPECIALTY FABRICATIONS WILL BE OFFERED ONLY AS AN ENGINEERED SYSTEM WITH ADS PIPE. THE QUANTITIES LISTED ARE ESTIMATES BASE ON OUR INTERPRETATIONS OF THE PROJECT QUANTITIES. PRICES GUARANTEED FOR ACCEPTANCE WITHIN THIRTY DAYS FROM ABOVE QUOTATION DATE. AFTER THIRTY DAYS ADS RESERVES THE RIGHT TO ADJUST PRODUCT PRICING. ORDERS RECEIVED FROM VALID QUOTES MUST BE SHIPPED WITHIN THIRTY DAYS, OR ADS RESERVES THE RIGHT TO ADJUST PRICING. ALL RETURNS SUBJECT TO A 25% RESTOCKING FEE. FITTINGS AND SPECIAL ORDER ITEMS CANNOT BE RETURNED. PRICES QUOTED DO NOT INCLUDE STATE, LOCAL, OR USE TAXES. TECHNICAL CERTIFICATION IS AVAILABLE BY REQUEST. QUANTITIES LISTED ARE ESTIMATED. THE BIDDER IS RESPONSIBLE FOR CONFIRMING QUANTITIES. PRODUCTS LISTED ARE FOR QUOTING PURPOSES. ADS DOES NOT IMPLY THAT THE MATERIAL WILL BE ACCEPTED ON ANY SPECIFIC PROJECT FOR JOBSITE UNLESS STATED OTHERWISE.
THIS QUOTE MUST BE ACCEPTED AND DELIVERED WITHIN 30 DAYS OF ABOVE QUOTATION DATE OR ADS RESERVES THE RIGHT TO ADJUST PRICING.
ITEM # 1 2 3 4 5 6 7 8 9 10 11 12 13
UNIT LF
TOTAL $$$$$$$$$$$$$$$-
EACH 60" 90 Bend Manifold (Group 1) EACH 60" Triple Manifold (Group 1) EACH 60" Double Manifold (Group 1) EACH 60" Single Manifold (Group 1) EACH 60" Couplers ST (Group 1) EACH 60" End Caps (Group 1) SY Filter Fabric (Group 1)
13-ft
16-ft
Schmatic is for system dimension information only. Laterals (4) are depicted for illustration only - actual number of laterals is indicated above. Clean-outs, risers, and other add-ons maybe recommended but are not shown in this schematic
QUOTATION
TO PLACE ORDERS: PH: 800-733-9987 FAX: 800-733-1974 JOB NAME:, GROUP 2 LOCATION: CUSTOMER: 0 COUNTY: Page 1 of 1 ____________________ ____________________ Ph: _________________ Fax:_________________ October 8, 2013
BID DATE:
PRICES QUOTES ARE BASE ON THE TOTAL PROJECT. ADS RESERVES THE RIGHT TO RE-QUOTE WHEN THE QUANTITIES CHANGE MORE THAN 10%. SPECIFIC PRODUCTS SUCH AS NYLOPLAST DRAIN AND CATCH BASINS, FABRICATED FITTINGS, AND SPECIALTY FABRICATIONS WILL BE OFFERED ONLY AS
THIS QUOTE MUST BE ACCEPTED AND DELIVERED WITHIN 30 DAYS OF ABOVE QUOTATION DATE OR ADS RESERVES THE RIGHT TO ADJUST PRICING.
ITEM # 1 2 3 4 5 6 7 8 9 10 11 12 13
QTY. -
UNIT LF
TOTAL $$$$$$$$$$$$$$$-
EACH 60" 90 Bend Manifold (Group 2) EACH 60" Triple Manifold (Group 2) EACH 60" Double Manifold (Group 2) EACH 60" Single Manifold (Group 2) EACH 60" Couplers ST (Group 2) EACH 60" End Caps (Group 2) SY Filter Fabric (Group 2)
QUOTATION
TO PLACE ORDERS: PH: 800-733-9987 FAX: 800-733-1974 JOB NAME:, GROUP 3 LOCATION: CUSTOMER: 0 COUNTY: Page 1 of 1 ____________________ ____________________ Ph: _________________ Fax:_________________ October 8, 2013
BID DATE:
PRICES QUOTES ARE BASE ON THE TOTAL PROJECT. ADS RESERVES THE RIGHT TO RE-QUOTE WHEN THE QUANTITIES CHANGE MORE THAN 10%. SPECIFIC PRODUCTS SUCH AS NYLOPLAST DRAIN AND CATCH BASINS, FABRICATED FITTINGS, AND SPECIALTY FABRICATIONS WILL BE OFFERED ONLY AS
THIS QUOTE MUST BE ACCEPTED AND DELIVERED WITHIN 30 DAYS OF ABOVE QUOTATION DATE OR ADS RESERVES THE RIGHT TO ADJUST PRICING.
ITEM # 1 2 3 4 5 6 7 8 9 10 11 12 13
QTY. -
UNIT LF
TOTAL $$$$$$$$$$$$$$$-
EACH 60" 90 Bend Manifold (Group 3) EACH 60" Triple Manifold (Group 3) EACH 60" Double Manifold (Group 3) EACH 60" Single Manifold (Group 3) EACH 60" Couplers ST (Group 3) EACH 60" End Caps (Group 3) SY Filter Fabric (Group 3)