Beruflich Dokumente
Kultur Dokumente
Joe Estrada 46
Date Semi-automatic
11/19/2007
Record Actual Values Used in Qualification Variables Joint Joint Type Backing Material Type Groove Welded from:
Qualification Range
Tee
tee, Lap
A653 to A653
12 ga.
same or thicker
Galvanized
F, H
Gas Electrode
Size Group Designation
0.035" 6
VISUAL EXAMINATION RESULTS
Specimen 1 Appearance Reinforcement Test Conducted By CWI No. Laboratory Test No.
Cracks
Specimen 2 NONE
Diam of Arc Nugget Signature
NONE
Michel Valdivia
7111751
FIELD Date of Test 11/29/2007
The undersigned certify that the statements in this record are correct and that the test welds were prepared and tested in accordance with the requirements of 4.6 of ANSI/AWS D1.3-98, Structural Welding Code-Sheet Steel.
Company
Authorized By
Caltrans Witness
Leo Savoian 46
Date Semi-automatic
11/19/2007
Record Actual Values Used in Qualification Variables Joint Joint Type Backing Material Type Groove Welded from:
Qualification Range
Tee
tee, Lap
A653 to A653
12 ga.
same or thicker
Galvanized
F, H
Gas Electrode
Size Group Designation
0.035" 6
VISUAL EXAMINATION RESULTS
Specimen 1 Appearance Reinforcement Test Conducted By CWI No. Laboratory Test No.
Cracks
Specimen 2 NONE
Diam of Arc Nugget Signature
NONE
Michel Valdivia
7111751
FIELD Date of Test 11/29/2007
The undersigned certify that the statements in this record are correct and that the test welds were prepared and tested in accordance with the requirements of 4.6 of ANSI/AWS D1.3-98, Structural Welding Code-Sheet Steel.
Company
Authorized By
Caltrans Witness
Charles Prince 46
Date Semi-automatic
11/19/2007
Record Actual Values Used in Qualification Variables Joint Joint Type Backing Material Type Groove Welded from:
Qualification Range
Tee
tee, Lap
A653 to A653
12 ga.
same or thicker
Galvanized
F, H
Gas Electrode
Size Group Designation
0.035" 6
VISUAL EXAMINATION RESULTS
Specimen 1 Appearance Reinforcement Test Conducted By CWI No. Laboratory Test No.
Cracks
Specimen 2 NONE
Diam of Arc Nugget Signature
NONE
Michel Valdivia
7111751
FIELD Date of Test 11/29/2007
The undersigned certify that the statements in this record are correct and that the test welds were prepared and tested in accordance with the requirements of 4.6 of ANSI/AWS D1.3-98, Structural Welding Code-Sheet Steel.
Company
Authorized By
Caltrans Witness
Date Manual
11/19/2007
Record Actual Values Used in Qualification Variables Joint Joint Type Backing Material Type Groove Welded from:
Qualification Range
Tee
tee, Lap
A653 to A653
12 ga.
same or thicker
Galvanized
F, H
Gas Electrode
Size Group Designation
1/8" 1
VISUAL EXAMINATION RESULTS
Specimen 1 Appearance Reinforcement Test Conducted By CWI No. Laboratory Test No.
Cracks
Specimen 2 NONE
Diam of Arc Nugget Signature
NONE
Michel Valdivia
7111751
FIELD Date of Test 11/29/2007
The undersigned certify that the statements in this record are correct and that the test welds were prepared and tested in accordance with the requirements of 4.6 of ANSI/AWS D1.3-98, Structural Welding Code-Sheet Steel.
Company
Authorized By
Caltrans Witness
Date Manual
11/19/2007
Record Actual Values Used in Qualification Variables Joint Joint Type Backing Material Type Groove Welded from:
Qualification Range
Tee
tee, Lap
A653 to A653
12 ga.
same or thicker
Galvanized
F, H
Gas Electrode
Size Group Designation
1/8" 1
VISUAL EXAMINATION RESULTS
Specimen 1 Appearance Reinforcement Test Conducted By CWI No. Laboratory Test No.
Cracks
Specimen 2 NONE
Diam of Arc Nugget Signature
NONE
Michel Valdivia
7111751
FIELD Date of Test 11/29/2007
The undersigned certify that the statements in this record are correct and that the test welds were prepared and tested in accordance with the requirements of 4.6 of ANSI/AWS D1.3-98, Structural Welding Code-Sheet Steel.
Company
Authorized By
Caltrans Witness
Date Manual
11/19/2007
Record Actual Values Used in Qualification Variables Joint Joint Type Backing Material Type Groove Welded from:
Qualification Range
Tee
tee, Lap
A653 to A653
12 ga.
same or thicker
Galvanized
F, H
Gas Electrode
Size Group Designation
1/8" 1
VISUAL EXAMINATION RESULTS
Specimen 1 Appearance Reinforcement Test Conducted By CWI No. Laboratory Test No.
Cracks
Specimen 2 NONE
Diam of Arc Nugget Signature
NONE
Michel Valdivia
7111751
FIELD Date of Test 11/29/2007
The undersigned certify that the statements in this record are correct and that the test welds were prepared and tested in accordance with the requirements of 4.6 of ANSI/AWS D1.3-98, Structural Welding Code-Sheet Steel.
Company
Authorized By
Caltrans Witness
Dave Corley 46
Date Semi-automatic
11/19/2007
Record Actual Values Used in Qualification Variables Joint Joint Type Backing Material Type Groove Welded from:
Qualification Range
Tee
tee, Lap
A653 to A653
12 ga.
same or thicker
Galvanized
F, H
Gas Electrode
Size Group Designation
0.035" 6
VISUAL EXAMINATION RESULTS
Specimen 1 Appearance Reinforcement Test Conducted By CWI No. Laboratory Test No.
Cracks
Specimen 2 NONE
Diam of Arc Nugget Signature
NONE
Michel Valdivia
7111751
FIELD Date of Test 11/29/2007
The undersigned certify that the statements in this record are correct and that the test welds were prepared and tested in accordance with the requirements of 4.6 of ANSI/AWS D1.3-98, Structural Welding Code-Sheet Steel.
Company
Authorized By
Caltrans Witness
Name
Identification No.
Classification
E-7018-H4R
F no.
Appearance
Satisfactory
Undercut
None
Piping porosity
None
Guided Bend Test Results Type Side Side Test conducted by per Result Pass Pass Arrow Inspection & Testing, Inc. Victor Fonseca Fillet Test Results Appearance N/A Fracture test root penetration Test conducted by per Fillet size N/A Macroetch Laboratory test no. Test date RADIOGRAPHIC TEST RESULTS
Film ID
Type
Result
N/A N/A
Results
Remarks
Film ID
Results
Remarks
N/A N/A
N/A N/A
We, the undersigned, certify that the statements in this record are correct and that the welds were prepared and tested
in accordance with the requirements of AASHTO/AWS D1.5, 2002 Bridge Welding Code.
Date Date
Name
Identification No.
Classification
E7018
F no.
Appearance
Satisfactory
Undercut
None
Piping porosity
None
Guided Bend Test Results Type Side Side Test conducted by per Result Pass Pass Arrow Inspection & Testing, Inc. Victor Fonseca Fillet Test Results Appearance N/A Fracture test root penetration Test conducted by per Fillet size N/A Macroetch Laboratory test no. Test date RADIOGRAPHIC TEST RESULTS
Film ID
Type
Result
N/A N/A
Results
Remarks
Film ID
Results
Remarks
N/A N/A
N/A N/A
We, the undersigned, certify that the statements in this record are correct and that the welds were prepared and tested
in accordance with the requirements of AASHTO/AWS D1.5, 2002 Bridge Welding Code.
Date Date
Name
Identification No.
Classification
E7018
F no.
Appearance
Satisfactory
Undercut
None
Piping porosity
None
Guided Bend Test Results Type Side Side Test conducted by per Result Pass Pass Arrow Inspection & Testing, Inc. Victor Fonseca Fillet Test Results Appearance N/A Fracture test root penetration Test conducted by per Fillet size N/A Macroetch Laboratory test no. Test date RADIOGRAPHIC TEST RESULTS
Film ID
Type
Result
N/A N/A
Results
Remarks
Film ID
Results
Remarks
N/A N/A
N/A N/A
We, the undersigned, certify that the statements in this record are correct and that the welds were prepared and tested
in accordance with the requirements of AASHTO/AWS D1.5, 2002 Bridge Welding Code.
Date Date
Name
Identification No.
Classification
E-7018-H4R
F no.
Appearance
Satisfactory
Undercut
None
Piping porosity
None
Guided Bend Test Results Type Side Side Test conducted by per Result Pass Pass Arrow Inspection & Testing, Inc. Victor Fonseca Fillet Test Results Appearance N/A Fracture test root penetration Test conducted by per Fillet size N/A Macroetch Laboratory test no. Test date RADIOGRAPHIC TEST RESULTS
Film ID
Type
Result
N/A N/A
Results
Remarks
Film ID
Results
Remarks
N/A N/A
N/A N/A
We, the undersigned, certify that the statements in this record are correct and that the welds were prepared and tested
in accordance with the requirements of AASHTO/AWS D1.5, 2002 Bridge Welding Code.
Date Date
FILLER METAL
Specification no. Filler Metal Manufacturer Classification F. No. Filler Metal Diameter
VISUAL INSPECTION
Appearance Type Undercut Result Piping Porosity Type Result
Test witnessed by Laboratory test No. Per Test Date We, the undersigned, certify that the statements in this record are correct and that the welds, were prepared and tested in accordance with the requirements of AASHTO/AWS D1.1, Structural Steel Welding Code. Test witness Results reviewed Manufacturer or contractor Authorized by Agency Date
Date
Name
E71T-8
F no.
Appearance
Satisfactory
Undercut
None
Piping porosity
None
Guided Bend Test Results Type Side Side Test conducted by per Result Pass Pass Arrow Inspection & Testing, Inc. Victor Fonseca Fillet Test Results Appearance N/A Fracture test root penetration Test conducted by per Fillet size N/A Macroetch Laboratory test no. Test date RADIOGRAPHIC TEST RESULTS
Film ID
Type
Result
N/A N/A
Results
Remarks
Film ID
Results
Remarks
N/A N/A
N/A N/A
We, the undersigned, certify that the statements in this record are correct and that the welds were prepared and tested
in accordance with the requirements of AASHTO/AWS D1.5, 2002 Bridge Welding Code.
Date Date
Name
E71T-8
F no.
Appearance
Satisfactory
Undercut
None
Piping porosity
None
Guided Bend Test Results Type Side Side Test conducted by per Result Pass Pass Arrow Inspection & Testing, Inc. Victor Fonseca Fillet Test Results Appearance N/A Fracture test root penetration Test conducted by per Fillet size N/A Macroetch Laboratory test no. Test date RADIOGRAPHIC TEST RESULTS
Film ID
Type
Result
N/A N/A
Results
Remarks
Film ID
Results
Remarks
N/A N/A
N/A N/A
We, the undersigned, certify that the statements in this record are correct and that the welds were prepared and tested
in accordance with the requirements of AASHTO/AWS D1.5, 2002 Bridge Welding Code.
Date Date
Name
E71T-8
F no.
Appearance
Satisfactory
Undercut
None
Piping porosity
None
Guided Bend Test Results Type Side Side Test conducted by per Result Pass Pass Arrow Inspection & Testing, Inc. Victor Fonseca Fillet Test Results Appearance N/A Fracture test root penetration Test conducted by per Fillet size N/A Macroetch Laboratory test no. Test date RADIOGRAPHIC TEST RESULTS
Film ID
Type
Result
N/A N/A
Results
Remarks
Film ID
Results
Remarks
N/A N/A
N/A N/A
We, the undersigned, certify that the statements in this record are correct and that the welds were prepared and tested
in accordance with the requirements of AASHTO/AWS D1.5, 2002 Bridge Welding Code.
Date Date
Josh Mejia 46
Date Semi-automatic
11/19/2007
Record Actual Values Used in Qualification Variables Joint Joint Type Backing Material Type Groove Welded from:
Qualification Range
Tee
tee, Lap
A653 to A653
12 ga.
same or thicker
Galvanized
F, H
Gas Electrode
Size Group Designation
0.035" 6
VISUAL EXAMINATION RESULTS
Specimen 1 Appearance Reinforcement Test Conducted By CWI No. Laboratory Test No.
Cracks
Specimen 2 NONE
Diam of Arc Nugget Signature
NONE
CARLOS SANTANA
97080771
FIELD Date of Test 6/25/2007
The undersigned certify that the statements in this record are correct and that the test welds were prepared and tested in accordance with the requirements of 4.6 of ANSI/AWS D1.3-98, Structural Welding Code-Sheet Steel.
Company
Authorized By
Caltrans Witness
Jesse Mejia 46
Date Semi-automatic
11/19/2007
Record Actual Values Used in Qualification Variables Joint Joint Type Backing Material Type Groove Welded from:
Qualification Range
Tee
tee, Lap
A653 to A653
12 ga.
same or thicker
Galvanized
F, H
Gas Electrode
Size Group Designation
0.035" 6
VISUAL EXAMINATION RESULTS
Specimen 1 Appearance Reinforcement Test Conducted By CWI No. Laboratory Test No.
Cracks
Specimen 2 NONE
Diam of Arc Nugget Signature
NONE
CARLOS SANTANA
97080771
FIELD Date of Test 6/25/2007
The undersigned certify that the statements in this record are correct and that the test welds were prepared and tested in accordance with the requirements of 4.6 of ANSI/AWS D1.3-98, Structural Welding Code-Sheet Steel.
Company
Authorized By
Caltrans Witness
A36
FILLER METAL
Specification no. AWS 5.1 Filler Metal Manufacturer Classification Lincoln E-7078 F. No. Filler Metal Diameter 1/8"
VISUAL INSPECTION
Appearance Acceptable Type Visual Test Conducted by: By Undercut Result Pass Arrow Inspection and Testing Steven McCall None Piping Porosity Type None Result
RT Technician
Laboratory test No. AIT-001 Per AWS D1.1 Test Date 5/24/2001 We, the undersigned, certify that the statements in this record are correct and that the welds, were prepared and tested in accordance with the requirements of AASHTO/AWS D1.1, Structural Steel Welding Code. Test witness Results reviewed Manufacturer or contractor Authorized by Agency University Mechanical Date Date
David Lee
5/25/2001
A36
FILLER METAL
Specification no. AWS 5.1 Filler Metal Manufacturer Classification Lincoln E-7078 F. No. Filler Metal Diameter 1/8"
VISUAL INSPECTION
Appearance Acceptable Type Visual Test Conducted by: By Undercut Result Pass Arrow Inspection and Testing Carlos Santana None Piping Porosity Type Face Root Laboratory Test No. Date of Test None Result Fail Pass 356-46-4944 5/22/2001
RT Technician
Laboratory test No. Per Test Date We, the undersigned, certify that the statements in this record are correct and that the welds, were prepared and tested in accordance with the requirements of AASHTO/AWS D1.1, Structural Steel Welding Code. Test witness Results reviewed Manufacturer or contractor Authorized by Agency University Mechanical Date Date
David Lee
5/25/2001
A36
FILLER METAL
Specification no. AWS 5.1 Filler Metal Manufacturer Classification Lincoln E-7078 F. No. Filler Metal Diameter 1/8"
VISUAL INSPECTION
Appearance Acceptable Type Visual Test Conducted by: By Undercut Result Pass Arrow Inspection and Testing Carlos Santana None Piping Porosity Type Face Root Laboratory Test No. Date of Test None Result Pass Pass 356-46-4944 5/22/2001
RT Technician
Laboratory test No. Per Test Date We, the undersigned, certify that the statements in this record are correct and that the welds, were prepared and tested in accordance with the requirements of AASHTO/AWS D1.1, Structural Steel Welding Code. Test witness Results reviewed Manufacturer or contractor Authorized by Agency University Mechanical Date Date
David Lee
5/25/2001
Name
Identification No.
Date
Record Actual Values Used in Qualification
SRR 6/11/2007
Qualification Range
Variables Process/Type Electrode (single or multiple) Current/Polarity Position Weld Progression Backing (YES or NO) [Table 4.11, Item (7)] Material/Spec. Base Metal Thickness: (Plate) Groove Fillet Thickness: (Pipe/tube) Groove Fillet Diameter: (Pipe) Groove Fillet Filler Metal [Table 4.11, Item (3)] Spec. No. Class F-No.
Single
N/A 1/2" N/A N/A N/A N/A ER70S-6 AWS A5.18 Argon
Gas/Flux Type
Other
Argon
VISUAL INSPECTION Acceptable YES or NO Yes Type Result Guided Bend Test Results Type Result
Fillet TestFillet Result Appearance Acceptable Size Fracture Test Root Penetration Acceptable Macro etch (Describe the location, nature, and size of any crack or tearing of the specimen.) Inspected by Test Number Rene Mora Test Number Organization Arrow Inspection and Testing Inc. Date
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested
in conformance with the requirements of Section 4 of AWS Dl .1/Di .1 M, Structural Welding CodeSteel.
Manufacturer or Contractor Authorized By
Ace Fence
Authorized By
Name
Welding Procedure Specification No.
Identification No.
Date
Record Actual Values Used in Qualification
11/8/2007
Qualification Range
Variables Process/Type Electrode (single or multiple) Current/Polarity Position Weld Progression Backing (YES or NO) [Table 4.11, Item (7)] Material/Spec. Base Metal Thickness: (Plate) Groove Fillet Thickness: (Pipe/tube) Groove Fillet Diameter: (Pipe) Groove Fillet Filler Metal [Table 4.11, Item (3)] Spec. No. Class F-No.
SINGLE
1G,2G,3G,1F,2F,3F Up YES
3/4"
1/8" - 1 1/2" 1/8" - 1 1/2" CJP 1/8" - 1 1/2" PJP 1/8" - UNLIMITED 1/8" to Unlimited 24" 24"
Gas/Flux Type
Other
N/A
VISUAL INSPECTION Acceptable YES or NO Yes Type Result Guided Bend Test Results Type Result
SIDE SIDE
PASS PASS
Fillet TestFillet Result Appearance Size Fracture Test Root Penetration Macroetch (Describe the location, nature, and size of any crack or tearing of the specimen.) Inspected by Test Number Test Number Frank Gasco Organization Date Arrow Inspection and Testing Inc.
11/8/2007
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested
in conformance with the requirements of Section 4 of AWS D1.1/D1 .1 M, Structural Welding CodeSteel.
Manufacturer or Contractor Authorized By
Authorized By
ELI CHOUEIRY
Name
Date
Record Actual Values Used in Qualification
4 8/27/2009
Qualification Range
Variables Process/Type Electrode (single or multiple) Current/Polarity Position Weld Progression Backing (YES or NO) [Table 4.11, Item (7)] Material/Spec. Base Metal Thickness: (Plate) Groove Fillet Thickness: (Pipe/tube) Groove Fillet Diameter: (Pipe) Groove Fillet Filler Metal [Table 4.11, Item (3)] Spec. No. Class F-No.
SINGLE
SCH 120-5/8 N/A 6"-OD N/A N/A A5.20 E71T-8 F-6 N/A N/A
VISUAL INSPECTION Acceptable YES or NO Yes
Gas/Flux Type
Other
N/A
Type
Result
Result
SIDE SIDE
PASS PASS
SIDE SIDE
PASS PASS
N/A ACCEPTABLE
Fillet TestFillet Result Appearance ACCEPTABLE Size Fracture Test Root Penetration ACCEPTABLE Macroetch (Describe the location, nature, and size of any crack or tearing of the specimen.) Inspected by Test Number Test Number CARLOS SANTANA Organization Date Arrow Inspection and Testing Inc.
8/27/2009
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested
in conformance with the requirements of Section 4 of AWS D1.1/D1 .1 M, Structural Welding CodeSteel.
Manufacturer or Contractor Authorized By
Authorized By
JESSIE MEJIA
Name
Welding Procedure Specification No.
Identification No.
Date
Record Actual Values Used in Qualification
11/8/2007
Qualification Range
Variables Process/Type Electrode (single or multiple) Current/Polarity Position Weld Progression Backing (YES or NO) [Table 4.11, Item (7)] Material/Spec. Base Metal Thickness: (Plate) Groove Fillet Thickness: (Pipe/tube) Groove Fillet Diameter: (Pipe) Groove Fillet Filler Metal [Table 4.11, Item (3)] Spec. No. Class F-No.
SINGLE
1G,2G,3G,1F,2F,3F Up YES
3/4"
1/8" - 1 1/2" 1/8" - 1 1/2" CJP 1/8" - 1 1/2" PJP 1/8" - UNLIMITED 1/8" to Unlimited 24" 24"
Gas/Flux Type
Other
N/A
VISUAL INSPECTION Acceptable YES or NO Yes Type Result Guided Bend Test Results Type Result
SIDE SIDE
PASS PASS
Fillet TestFillet Result Appearance Size Fracture Test Root Penetration Macroetch (Describe the location, nature, and size of any crack or tearing of the specimen.) Inspected by Test Number Test Number Frank Gasco Organization Date Arrow Inspection and Testing Inc.
11/8/2007
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested
in conformance with the requirements of Section 4 of AWS D1.1/D1 .1 M, Structural Welding CodeSteel.
Manufacturer or Contractor Authorized By
Authorized By
ELI CHOUEIRY
6" / 3/8"
FILLER METAL
Specification no. A5.5 Classification Filler Metal Manufacturer Lincoln FILLER METAL QUALIFICATION RANGE: E 7018-H4R F. No. Filler Metal Diameter 4 1/8"
VISUAL INSPECTION
Appearance UNACCEPTABLE Type SIDE SIDE Test Conducted by: By Undercut Result FAIL PASS ARROW INSPECTION & TESTING FRANK GASCO NONE Piping Porosity Type SIDE SIDE Laboratory Test No. Date of Test 10/22/2007 NONE Result FAIL FAIL
RT Technician
Laboratory test No. Per Test Date We, the undersigned, certify that the statements in this record are correct and that the welds, were prepared and tested in accordance with the requirements of AWS D1.1, Structural Steel Welding Code. Test witness CARLOS SANTANA Manufacturer or contractor Authorized by RALPH AYALA III Agency AIT AYALA BORING Date Date 10/22/2007
10/18/2007
FILLER METAL
Specification no. A5.5 Classification E 7018-H4R F. No. Filler Metal Manufacturer Lincoln Filler Metal Diameter FILLER METAL QUALIFICATION RANGE: F-4 and LESS 4 1/8"
VISUAL INSPECTION
Appearance ACCEPTABLE Type SIDE SIDE Test Conducted by: FRANK GASCO By Undercut Result PASS PASS ARROW INSPECTION & TESTING NONE Piping Porosity Type SIDE SIDE Laboratory Test No. 10/22/2007 Date of Test NONE Result PASS PASS
Signature
RT Technician
Laboratory test No. Per Test Date We, the undersigned, certify that the statements in this record are correct and that the welds, were prepared and tested in accordance with the requirements of AWS D1.1, Structural Steel Welding Code. Test witness CARLOS SANTANA Manufacturer or contractor Authorized by RALPH AYALA III Agency AIT AYALA BORING, INC. Date Date 10/22/2007
10/18/2007
DATE
DATE
FILLER METAL
Specification no. A5.5 Classification E 7018-H4R F. No. Filler Metal Manufacturer Lincoln Filler Metal Diameter FILLER METAL QUALIFICATION RANGE: F-4 and LESS 4 1/8"
VISUAL INSPECTION
Appearance ACCEPTABLE Type SIDE SIDE Test Conducted by: FRANK GASCO By Undercut Result PASS PASS ARROW INSPECTION & TESTING NONE Piping Porosity Type SIDE SIDE Laboratory Test No. 10/22/2007 Date of Test NONE Result PASS PASS
Signature
RT Technician
Laboratory test No. Per Test Date We, the undersigned, certify that the statements in this record are correct and that the welds, were prepared and tested in accordance with the requirements of AWS D1.1, Structural Steel Welding Code. Test witness CARLOS SANTANA Manufacturer or contractor Authorized by RALPH AYALA III Agency AIT AYALA BORING, INC. Date Date 10/22/2007
10/18/2007
DATE
DATE
Date
Qualification Range
Gas Electrode
Size Group Designation VISUAL EXAMINATION RESULTS
Specimen 2 Cracks
Diam of Arc Nugget Per Date of Test
Undercut
The undersigned certify that the statements in this record are correct and that the test welds were prepared and tested in accordance with the requirements of 4.6 of ANSI/AWS D1.3-98, Structural Welding Code-Sheet Steel.
Company
Authorized By
Welder
Identification No. Rev Record Actual Values Used in Qualification
Name
Welding Procedure Specification No.
Date
Qualification Range
Variables Process/Type Electrode (single or multiple) Current/Polarity Position Weld Progression Backing (YES or NO) [Table 4.11, Item (7)] Material/Spec. Base Metal Thickness: (Plate) Groove Fillet Thickness: (Pipe/tube) Groove Fillet Diameter: (Pipe) Groove Fillet Filler Metal [Table 4.11, Item (3)] Spec. No. Class F-No.
Gas/Flux Type
Other VISUAL INSPECTION Acceptable YES or NO Type Result Guided Bend Test Results Type Result
Fillet TestFillet Result Appearance Size Fracture Test Root Penetration Macro etch (Describe the location, nature, and size of any crack or tearing of the specimen.) Inspected by Test Number Test Number Organization Date
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested
in conformance with the requirements of Section 4 of AWS D1 .1/D1 .1 M, Structural Welding CodeSteel.
Manufacturer or Contractor Authorized By
Authorized By
BASE MATERIAL
Specification Alloy and Temper Group # II Coating Cleaning Method Decking Gage A572 Grade 50 Steel N/A Surface Condition HR CR N/A Wire Brush/Grinder N/A
SHAPE
Flat X Thickness Round Tube 0.72 Angle
MACHINE DATA
Power Supply Make TRW/Nelson Welder Model 6500 Stud Gun Model TRW Series Welding Time Secs. 0.65 Cycles 36 5 % OCV Curret 1200 Polarity DCEN Lift Plunge (protrusion) Weld Cable Size Length 500' Max. Number of grounds (work piece leads) 2 (Two) Stud No. 1 2 Visual Acceptance Steven McCall Steven McCall Option #1 Bend Test Accepted 11-06-01 Accepted 11-06-01 POSITION Overhead Down hand 70 Angular Angle Iron - Inside Radius SHIELDING GAS Shielding Gas(es) Composition Flow Rate Option #2 Tension Test Side Hand X Degrees from normal Heel of Angle
* Note: Torque test optional for threaded fasteners only. Mechanical Test Conducted by Arrow Inspection & Testing Inc.
Company
Date
11/6/2001
We, the undersigned certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in accordance with the requirements of section 7 of ANSI/AWS D1.1, 2000 Structural Welding Cose-Steel.
Signed By
(Contractor / Applicator)
Title
Date
BASE MATERIAL
Specification Alloy and Temper Group # II Coating Cleaning Method Decking Gage A572 Grade 50 Steel N/A Surface Condition HR CR N/A Wire Brush/Grinder N/A
SHAPE
Flat X Thickness Round Tube 0.72 Angle
MACHINE DATA
Power Supply Make TRW/Nelson Welder Model 6500 Stud Gun Model TRW Series Welding Time Secs. 0.65 Cycles 36 5 % OCV Curret 1200 Polarity DCEN Lift Plunge (protrusion) Weld Cable Size Length 500' Max. Number of grounds (work piece leads) 2 (Two) Stud No. 1 2 Visual Acceptance Steven McCall Steven McCall Option #1 Bend Test Accepted 11-06-01 Accepted 11-06-01 POSITION Overhead Down hand 70 Angular Angle Iron - Inside Radius SHIELDING GAS Shielding Gas(es) Composition Flow Rate Option #2 Tension Test Side Hand X Degrees from normal Heel of Angle
* Note: Torque test optional for threaded fasteners only. Mechanical Test Conducted by Arrow Inspection & Testing Inc.
Company
Date
11/6/2001
We, the undersigned certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in accordance with the requirements of section 7 of ANSI/AWS D1.1, 2000 Structural Welding Cose-Steel.
Signed By
(Contractor / Applicator)
Title
Date
BASE MATERIAL
Specification Alloy and Temper Group # II Coating Cleaning Method Decking Gage A572 Grade 50 Steel N/A Surface Condition HR CR N/A Wire Brush/Grinder N/A
SHAPE
Flat X Thickness Round Tube 0.72 Angle
MACHINE DATA
Power Supply Make TRW/Nelson Welder Model 6500 Stud Gun Model TRW Series Welding Time Secs. 0.65 Cycles 36 5 % OCV Curret 1200 Polarity DCEN Lift Plunge (protrusion) Weld Cable Size Length 500' Max. Number of grounds (work piece leads) 2 (Two) Stud No. 1 2 Visual Acceptance Steven McCall Steven McCall Option #1 Bend Test Accepted 11-06-01 Accepted 11-06-01 POSITION Overhead Down hand 70 Angular Angle Iron - Inside Radius SHIELDING GAS Shielding Gas(es) Composition Flow Rate Option #2 Tension Test Side Hand X Degrees from normal Heel of Angle
* Note: Torque test optional for threaded fasteners only. Mechanical Test Conducted by Arrow Inspection & Testing Inc.
Company
Date
11/6/2001
We, the undersigned certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in accordance with the requirements of section 7 of ANSI/AWS D1.1, 2000 Structural Welding Cose-Steel.
Signed By
(Contractor / Applicator)
Title
Date
BASE MATERIAL
Specification Alloy and Temper Group # II Coating Cleaning Method Decking Gage A572 Grade 50 Steel N/A Surface Condition HR CR N/A Wire Brush/Grinder N/A
SHAPE
Flat X Thickness Round Tube 0.72 Angle
MACHINE DATA
Power Supply Make TRW/Nelson Welder Model 6500 Stud Gun Model TRW Series Welding Time Secs. 0.65 Cycles 36 5 % OCV Curret 1200 Polarity DCEN Lift Plunge (protrusion) Weld Cable Size Length 500' Max. Number of grounds (work piece leads) 2 (Two) Stud No. 1 2 Visual Acceptance Steven McCall Steven McCall Option #1 Bend Test Accepted 11-06-01 Accepted 11-06-01 POSITION Overhead Down hand 70 Angular Angle Iron - Inside Radius SHIELDING GAS Shielding Gas(es) Composition Flow Rate Option #2 Tension Test Side Hand X Degrees from normal Heel of Angle
* Note: Torque test optional for threaded fasteners only. Mechanical Test Conducted by Arrow Inspection & Testing Inc.
Company
Date
11/6/2001
We, the undersigned certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in accordance with the requirements of section 7 of ANSI/AWS D1.1, 2000 Structural Welding Cose-Steel.
Signed By
(Contractor / Applicator)
Title
Date
Name
Identification No.
Date
Record Actual Values Used in Qualification
10/24/2007
Qualification Range
Variables Process/Type Electrode (single or multiple) Current/Polarity Position Weld Progression Backing (YES or NO) [Table 4.11, Item (7)] Material/Spec. Base Metal Thickness: (Plate) Groove Fillet Thickness: (Pipe/tube) Groove Fillet Diameter: (Pipe) Groove Fillet Filler Metal [Table 4.11, Item (3)] Spec. No. Class F-No.
SINGLE
1G,2G,3G,1F,2F,3F Up YES
1"
1/8" - UNLIMITED 1/8" - UNLIMITED PJP 1/8" - UNLIMITED 1/8" to Unlimited 24" 24"
Gas/Flux Type
Other
N/A
VISUAL INSPECTION Acceptable YES or NO Yes Type Result Guided Bend Test Results Type Result
SIDE SIDE
PASS PASS
Fillet TestFillet Result Appearance Size Fracture Test Root Penetration Macroetch (Describe the location, nature, and size of any crack or tearing of the specimen.) Inspected by Test Number Frank Gasco Test Number Organization Arrow Inspection and Testing Inc. Date
10/30/2007
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested
in conformance with the requirements of Section 4 of AWS D1.1/D1 .1 M, Structural Welding CodeSteel.
Manufacturer or Contractor Authorized By
Name
Identification No.
Date
Record Actual Values Used in Qualification
10/24/2007
Qualification Range
Variables Process/Type Electrode (single or multiple) Current/Polarity Position Weld Progression Backing (YES or NO) [Table 4.11, Item (7)] Material/Spec. Base Metal Thickness: (Plate) Groove Fillet Thickness: (Pipe/tube) Groove Fillet Diameter: (Pipe) Groove Fillet Filler Metal [Table 4.11, Item (3)] Spec. No. Class F-No.
SINGLE
1G,2G,3G,1F,2F,3F Up YES
1"
1/8" - UNLIMITED 1/8" - UNLIMITED PJP 1/8" - UNLIMITED 1/8" to Unlimited 24" 24"
Gas/Flux Type
Other
N/A
VISUAL INSPECTION Acceptable YES or NO Yes Type Result Guided Bend Test Results Type Result
SIDE SIDE
PASS PASS
Fillet TestFillet Result Appearance Size Fracture Test Root Penetration Macroetch (Describe the location, nature, and size of any crack or tearing of the specimen.) Inspected by Test Number Frank Gasco Test Number Organization Arrow Inspection and Testing Inc. Date
10/30/2007
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested
in conformance with the requirements of Section 4 of AWS D1.1/D1 .1 M, Structural Welding CodeSteel.
Manufacturer or Contractor Authorized By
Name
Identification No.
Date
Record Actual Values Used in Qualification
SRR 6/11/2007
Qualification Range
Variables Process/Type Electrode (single or multiple) Current/Polarity Position Weld Progression Backing (YES or NO) [Table 4.11, Item (7)] Material/Spec. Base Metal Thickness: (Plate) Groove Fillet Thickness: (Pipe/tube) Groove Fillet Diameter: (Pipe) Groove Fillet Filler Metal [Table 4.11, Item (3)] Spec. No. Class F-No.
Single
N/A 1/2" N/A N/A N/A N/A ER70S-6 AWS A5.18 Argon
Gas/Flux Type
Other
Argon
VISUAL INSPECTION Acceptable YES or NO Yes Type Result Guided Bend Test Results Type Result
Fillet TestFillet Result Appearance Acceptable Size Fracture Test Root Penetration Acceptable Macro etch (Describe the location, nature, and size of any crack or tearing of the specimen.) Inspected by Test Number Rene Mora Test Number Organization Arrow Inspection and Testing Inc. Date
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested
in conformance with the requirements of Section 4 of AWS Dl .1/Di .1 M, Structural Welding CodeSteel.
Manufacturer or Contractor Authorized By
Ace Fence
Authorized By