Beruflich Dokumente
Kultur Dokumente
In order to see if there is network link connectivity, you can check it by using the following
commands:
SunOS:
$ ndd -get /dev/e1000g0 link_status
0
where 0 means no link and 1 link OK and e1000g0 is your network interface.
In case of older machines where the device is not associated with a port, you do first
$ ndd -set /dev/eri instance 0
in order to set the instance of eri device to 0 and then get the status of the device.
$ ndd -get /dev/eri link_status
1$
Linux:
$ ethtool eth0 | egrep Link
Link detected: no