Beruflich Dokumente
Kultur Dokumente
03
Construction
Uses
Advantages
PVC and timber. Not suitable for windows and doors. low solvent content, easy applicable and environmental friendly excellent corrosion protection even in chemically aggressive atmosphere excellent adhesion directly to steel, galvanized surfaces, stainless steel, copper, Aluminium and hard PVC good corrosion protection even in case of manually de-rusted surfaces excellent Colour-shade retention and chalking resistance non- brittling due to a unique binder combination. 36 RAL- and 14 metallic colour shades as per our colour shade card or price list respectively.
lcosit 6630 high-solid, RAL- colour shades: 25 and 15 kg, 3 and 0,75 ltr net. Metallic colour shades: 15 kg net.
Technical Data
Colour Packaging Shelf life Coating system
lcosit 6630 Primer, redbrown + grey: 15 kg net Thinner B: 25, 10, 3 and 1 ltr.
In original sealed containers, in cool and dry environment: 2 years. Steel: 2-3x lcosit 6630 high-solid
in case of manual de-rusting: lx lcosit 6630 Primer and 2x lcosit 6630 high-solid. lcosit Aktivprimer can also be used as a primer. Galvanized surfaces, stainless steel. copper. aluminium. Hard PVC and timber
2x Icosit 6630 high-solid Maintenance coatings: Patch-up with lcosit 6630 Primer or lcosit Aktivprimer. 1-2x Icosit 6630 high-solid.
Sag resistance
Resistance
Brush application: wet: approx. 130 microns dry: 80 microns By spray: wet: approx. 200 microns dry: 120 microns Avoid excessive film thickness. Please note: Where filigrane constructions and profiles shall be coated (e.g. handrails, pylons, frame constructions, etc.) difficulties may occur during roller application to achieve this dry film thickness. If necessary consider additional coats. Chemical resistance: Excellent resistance to rural, town, industrial and marine atmosphere as well as against temporary exposure to neutral salts. Not resistant to continuous exposure of dilute acids and yes, fatty oils, fuels, mineral oils etc. Temporary short-term exposure does not harm. Not suitable for continuous exposure to liquids (including water). Temperature: + 80C
Application Details
Application temperature (material and substrate) Surface preparation: Minimum + 50C - avoid dew point conditions. Steel: In case of aggressive industrial atmosphere or highly polluted surfaces (e.g. through chlorides, sulphates, nitrates etc.): Blastcleaning to Sa 2 1/2 as per DIN 55 928, part 4. In case of lower exposure as e.g. in rural atmosphere or indoors, manual surface preparation (power tool cleaning) to St 2 may be sufficient. Galvanized surface. stainless steel, copper. aluminium, hard PVC: Free of dirt, oil, fat and other contamination. Maintenance of existing coating systems: In case of well adhering old coating systems, careful cleaning (e.g. by high pressure water jetting) is sufficient. Loose particles must be removed, defective areas must be dc-rusted to partially PSa 2 1/2 PMa or PSt 2 and subsequently patch-primed with lcosit 6630 Primer.
Specific Gravity Liquid Approx.% kg / ltr. by Vol. 59 by Weight 78 Solids content approx.% Theoretical layer thickness with a consumption of 2 100 g/m wet microns 70 dry microns 41 Mat.consunp. with 20%loss for medium dry film thickness of approx. 2 kg/m 0.240 0.300 0.260
Application
Material consumption
Construction
lcosit 6630 M high solid RAL colours lcosit 6630 Primer DB-colour Shades
1.4
microns 80 100 80
1.5
57
78
65
37
1.5
57
78
65
37
80
0.260
Waiting time between coats: Drying time Final drying Precautionary measures
Icosit 6630 high-solid is supplied ready for use. Stir well prior to application. Adding thinner will result in reduced sag resistance and a reduced dry film-thickness. By brush or roller. Conventional high pressure spraying: nozzle size 1,8 -2,5 mm, pressure 3-5 bar. By airless spray: minimum pressure 180 bar at spray gun. Nozzle size 0,38-0,66 mm, spray angle 4080. Minimum 1 day. Dust-free after approx. 4 - 5 hours. May be manipulated after approx. 8-10 hours. Depending on film-thickness, temperature and ventilation several days. Full mechanical and chemical resistance is only achieved after final drying. Thinning and cleaning of implements: Thinner B. Icosit 6630 high-solid falls under the dangerous goods regulations (class 3.3 inflammable). In a liquid state the product and the thinner contaminate water and should not be poured into drains, water and ground. Remnants of thinner and/or coating material must be removed according to regulations. Please observe safety hints on containers and local regulations. During application and curing in confined spaces, ditches, shafts, containers etc. adequate ventilation must be provided. Keep away from fire, igniting agents and naked light during application. Further details are contained in our instructions Health protection and prevention of accidents.
The information, and in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sikas recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Legal notes
Sika Egypt for Construction Chemicals El Abour City 1st industrial zone (A) Section # 10 Block 13035, Egypt
Tel: +202- 6100714/15/16/17/18 Fax:+202- 6100759 Mob: +2012- 3908822/55 www.sika.com.eg TTIcositPP -6630 High Solid
2/2