Beruflich Dokumente
Kultur Dokumente
Transformer and Secondary Current Conductors The machines are in general equipped with two welding transformers, designed for connection to the AC, mains. The secondary windings are made of high conductive copper. Effective cooling is ensured by water carrying copper tubes brazed onto the secondary windings in order to prevent from over-heating. The secondary windings as well as the secondary current conductors are amply dimensioned and compactly arranged. Thi contributes This t ib t t to a very good d power f factor. t The Th transt formers with their conductors are adequately protected against welding spatter.
Applications
Chains Rings Rails
XA00164720
Technical data
Transformer rating, 50% duty cycle, kVA Max welding input, kVA Max secondary voltage, V Number of transformer steps Max clamping force, kp Max clamping opening, mm Max upsetting force, kp Max platen stroke, mm Max weldable outer tube dia, mm Max weld area, mm: 2 - at upsetting p gp pressure 2.5 kp/mm p - at upsetting pressure 5.0 kp/mm2 - at upsetting pressure 7.0 kp/mm2 Cooling water consumption, l/min Approximate welding times for following weld areas, sec. - 1400 mm2 - 2000 mm2 - 5000 mm2 - 8000 mm2 - 10000 mm2 *) Figures based on upsetting force 5 Standard dies: - Height, mm - Width, mm - Length, mm Machine: - Height, mm - Width, mm - Length, mm Net weight, kg
5883-K
2x80 320 8 20 7000 110 7000 80 90 2800 1400 1000 25 (37)
6883 3-K
2x110 330 8 20 22000 212 10000 90 130 4000 2000 1400 35 (50 0)
7883-K
2x150 (2x250) 490 (650) 10 (12) 20 25000 140 (280) 25000 125 160 10000 5000 3500 40-88
8883-K
2x250 650 12 20 35000 240 35000 175 190 14000 7000 5000 60 (90)
9883-K
2x250 (2x350) 650 (880) 12 (14) 20 60000 440 50000 225 285 20000 10000 7100 60-95
XA00164720 / 2013-05-24 / E ESAB reserves the right to alte er specifications without prior n notice
20-25 *) 25-30 *) 75-90 *) 110-160 *) 140-160 *) kp/mm2 55 120 90 1840 1590 2380 3000 60 150 113 2265 1830 3240 5000 75 170 135 2485 1980 3530 7000 75 180 145 3000 2200 4450 11000 85 240 170 3410 2260 4440 16000
ESAB AB SE-695 81 LAX SWEDEN Phone: +46 584 81000 Fax: +46 584 411721 E-mail: info@esab.se
www.esab.com