Beruflich Dokumente
Kultur Dokumente
0-1
∗∗
nickel plated
W/ sealant
Applicable
Electroless
Page
Applicable tube O.D.
tube (mm)
material
ø3.2 ø4 ø6 ø8 ø10 ø12 ø16
One-touch In/Out connection
Possible to use in vacuum to –100kPa
M3
Nylon
One-touch Mini M5
2.1-1
Soft nylon
Series KJ Polyurethane
18
2.1-9
Soft nylon 14
Series KQ2
General Purpose Fitting Series
Polyurethane 3 8
Applicable tube Metric size 12
Unions
Low-torque rotation M5
Nylon
Rotary One-touch Fittings M6
2.1-31
18
Series KS (Standard) Soft nylon
14
Series KX (High speed) Polyurethane 3
8
12
Applicable tube Metric size
14
One-touch In/Out connection
For compact and concentrated tubing applications Nylon 38
2.1-35
One-touch Fittings Manifold Soft nylon ø8
Series KM Polyurethane ø10
18
Possible to use in vacuum to
Possible to use in vacuum1.3
–101.3kPa 10-2 Nylon
14
2.1-39
Series KF Polyurethane 1 2
Tubing connection/disconnection
without use of tools Nylon M3
2.1-47
18
Nylon
Accepts soft copper tubing 14
2.1-53
Soft nylon
Self-align Fittings 38
2.0-1
2.0-0 to 2.1-46 2/19/99 4:43 PM Page 2.0-2
∗∗
nickel plated
Applicable
W/ sealant
Electroless
Applicable tube O.D.
Page
tube (mm)
material
General Purpose Fitting Series
Self-seal Fittings
2.1-59
14
Soft nylon
38
Series KC Polyurethane 12
Applicable tube Metric size Unions
2.1-65
Soft nylon
Series DM 12
Polyurethane tubes
Applicable tube Metric size
Rectangular 10
Nylon
Multi-connector tubes
2.1-69
Soft nylon
Series KDM 20
Polyurethane tubes
Applicable tube Metric size
2.1-72
Soft nylon
Series KB
Polyurethane
Applicable tube Metric size
nickel plated
Applicable
W/ sealant
Electroless
Applicable tube O.D.
Page
tube (inch)
Inch-size One-touch Fittings
material
ø1 8 ø 532 ø 316 ø14 ø516 ø3 8 ø1 2
One-touch Inch-size tubing/UNF, NPT thread connection
UNF
Possible to use in vacuum to –100kPa 10-32
Nylon
1 16
One-touch Mini Soft nylon 2.2-1
18
Series KJ Polyurethane
Unions
Applicable area —— U.S.A. etc.
Soft nylon 14 Hl
Applicable area —— U.S.A. etc. 38
Polyurethane
12 Dl
Unions
MS
One-touch Inch-size tubing/M5, R, Rc thread connection
Possible to use in vacuum to –100kPa M5 Tl
Nylon
One-touch Fittings 18
2.2-16
14
Series KQ2 Soft nylon
38
Polyurethane 1
Applicable area ——Australia, Japan, etc. 2
Unions
2.0-2
2.0-0 to 2.1-46 2/19/99 4:44 PM Page 2.0-3
∗∗
nickel plated
Applicable
W/ sealant
Electroless
Applicable tube O.D.
Page
tube (inch)
Inch-size One-touch Fittings
material
ø1 8 ø 532 ø 316 ø14 ø516 ø3 8 ø1 2
Low-torque rotation for fast swivel
and oscillating applications Nylon UNF
10-32
Rotary One-touch Fittings
2.2-22
18
Soft nylon
14
Series KS (Standard) Polyurethane 38
14
One-touch In/Out connection For compact and
concentrated tubing applications Nylon 38
2.2-25
One-touch Fittings Manifold Soft nylon 5 16
Series KM Polyurethane 38
12
Applicable tube Inch size
Applicable thread —— NPT
One-touch In/Out connection
Multi-tube connector
Nylon 10
Rectangular Multi-connector tubes
2.2-27
Soft nylon
Series KDM 20
Polyurethane tubes
Applicable tube Inch size
nickel plated
Applicable
W/ sealant
Electroless
Applicable tube O.D.
Page
Spatter
tube
proof
Fitting Series For Special Environments
(mm)
material
ø3.2 ø4 ø6 ø8 ø10 ø12 ø16
One-touch In/Out connection
18
For use where weld spatter is generated
Flame resistant material UL-94 V0 FR 14
Soft nylon
2.3-1
FR One-touch Fittings FR
38
One-touch Fittings
2.3-9
14
Soft nylon
38
Series KG Polyurethane 12
Applicable tube Metric size Unions
One-touch In/Out connection
For use in corrosive environments
Stainless steel (SUS316)
Nylon
Miniature Fittings
2.3-21
Soft nylon M5
Series MS
Polyurethane
Applicable tube Metric size
2.0-3
2.0-0 to 2.1-46 3/3/99 9:19 AM Page 2.0-4
∗∗
With sealant
nickel plated
For Special Environments
Applicable
Electroless
Page
Applicable tube O.D.
Spatter
tube
proof
(mm)
material
Fitting Series
2.3-25
Series KA 14
Polyurethane 3
8
12
Unions
Page
Color Metric sizes (mm) Inch sizes (inch)
ø4 ø8 ø 1 8" 3 1 3 1
General tubing (ø 5 32 ) ø6 (ø 5 16 ) ø10 ø12 ø16 (ø3.2)ø 16" ø 4" ø 8" ø 2"
1.5MPa max. at 20˚C
Black
Nylon Tubing White
Series T Red
2.4-1
Blue
Yellow
Green
Slightly
For flexible
general tubing
1.0MPa max. at 20˚C
1.5MPa{15.3kgf/cm 2}max.at20˚C
Black
White
Soft Nylon Tubing
2.4-2
Red
Series TS Blue
Yellow
Green
Flexible
0.8MPa max. at 20˚C
Black
Tubing
White
Polyurethane Tubing Red
Series TU
2.4-3
Blue
Yellow
Green
Clear
Orange
Extremely flexible
0.6MPa max. at 20˚C Black
White
Kl
Soft Polyurethane Tubing Red
Series TUS Ml
2.4-4
Blue
Yellow
Green Hl
Opaque
Yellow
brown Dl
For flexibility and moving applications
1
MS
Polyurethane Coil Tubing tube
2.4-5
2
Series TCU tubes Tl
3
tubes
Series TFU 3
tubes
2.0-4
2.0-0 to 2.1-46 2/19/99 4:45 PM Page 2.0-5
∗∗
Page
Color Metric sizes (mm) Inch sizes (inch)
ø4 ø8 ø1 8 3 1 3 1
Use in spatter generating atmosphere/ (ø 5 32 ) ø6 (ø 5 16 ) ø10 ø12 ø16 (ø3.2)ø 16 ø 4 ø 8 ø 2
Flame resistant material
Black
FR Soft Nylon Tubing White
2.4-7
Series TRS Red
Blue
Flame resistance (Equivalent to UL-94 standard V-0)
Green
Tubing
Black
White
FR Double Layer Tubing
2.4-8
Red
Series TRB Blue
Yellow
Flame resistance (Equivalent to UL-94 standard V-0) Green
Antistatic Tubing
2.4-10
Black
Series TA
Accessories / Tools
Accessories
Multi-tube Holder
2.5-1
Series TM
Multi-holder
2.5-2
Series TMA
Series TK
Series TG
S X2
Option indication
X2 With electroless nickel plated
With sealant
— Without sealant
S Sealant
Note) With gasket for all of M3, M5 and M6 threads. With sealant
2.0-5
2.0-0 to 2.1-46 2/19/99 4:45 PM Page 2.0-7
∗∗
Selection Maintenance
Caution Caution
qKeep the connection part of fitting and tubing from rotating to prevent qReplace fittings or tubing having the following problems.
cracking. Use Rotary One-touch Fittings Series KS (Standard) or KX a) Cracks, gouges, wearing, corrosion
(High speed) for these cases. b) Air leakage
wThe tube bending radius in the vicinity of the fitting should be at least c) Twists or crushing of tubing
the minimum bending radius of the tube. If bent more than the min. d) Hardening, deterioration, softening of tubing
bending radius, tubing may fail or be crushed. wDo not reuse damaged fittings/tubing.
eDo not use tubing for combustibles, explosives or poisoneous fluids
like gas, fuel gas, coolant etc. They can permeate through tubing
walls.
rApplicable for general industry water. Consult SMC if using other flu- Use of One-touch Fittings
ids. Surge pressure must be under the max. operating pressure. If
surge pressure exceeds the max. operating pressure, fitting or tub-
ing may be damaged. Caution
qTube insertion and removal from One-touch fittings
1) Installing tube
qCut the tube perpendicularly, being careful not to damage the
Installation outside surface. Use SMC tube cutter “TK-1”, “TK-2” or “TK-
3”. Do not cut the tube with pliers, nippers, scissors, etc., other-
Caution wise, the tube will be deformed and troubles may result.
qCheck whether tubing is not damaged before installing. Confirm wGrasp the tube, slowly push it into the One-touch fittings until it
model size, etc. comes to a stop.
ePull the tubing back gently to make sure it has a positive seal.
wTake the change in tubing length due to applied pressure into con-
Insufficient installation may cause air leakage or tube releasing.
sideration when piping.
2) Removing tube
eDo not apply unnecessary forces such as twisting, pulling, moment qPush in evenly on the release button.
loads, etc. on fittings or tubing. This will cause damage to fittings and wPull out the tube while keeping the release button depressed. If
will crush, burst or release tubing. the release button is not held down, the tube cannot be with-
rAvoid wear-out of tubing, twisted piping or damage to tubing to pre- drawn.
vent crushing, bursting or release of tubing. eTo reuse the tubing, cut off the previously lodged portion of the
tWhen screwing together pipes and fittings etc., be certain that cutting tube.
dust from the pipe threads and sealing material do not get inside the wTo install the fittings, screw the fitting into the hexagonal face of the
piping. Furthermore, when pipe tape is used, leave 1.5 to 2 thread body, applying the appropriate wrench as close to the thread as pos-
ridges exposed at the end. sible. Use the spanner corresponding to the size of hexagonal por-
tion, or hexagonal portion may be deformed.
eTightening the thread portion of an M3, M5 or M6 fittings
1) M3
First, tighten it by hand, then give it an additional 1/4 turn with a
wrench.
2) M5/M6
Environment First, tighten it by hand, then give it an additional 1/6 turn with a
wrench.
Warning Excessive tightening may damage the thread portion or deform
qAnti-static fittings (Series KA) and anti-static tubing (Series TA) are
the gasket and cause air leakage.
recommended for use where static electricity is a problem. Using
other fittings or tubing may cause damage to the system and prod-
ucts.
wFlame resistant fittings (Series KR/KRM) and tubing (Series
TRS/TRB) are recommended for use in spatter applications. Fire
may occur because of spattering.
eDo not use fittings and tubing where they are directly in contact with
cutting oil, lubrication or coolant. Consult SMC if using under such
applications.
2.0-7
2.0-0 to 2.1-46 2/19/99 4:45 PM Page 2.0-8
∗∗
Kl
Ml
Hl
Dl
MS
Tl
2.0-8
2.0-0 to 2.1-46 2/19/99 4:47 PM Page 2.1-9
∗∗
One-touch Fittings
Applicable Tube – Metric Size Connection Thread – M, R(PT), Rc(PT)
Series KQ2
How to Order
KQ 2 H 06 01 S
With sealant
— Without sealant
One-touch S Sealant
Fitting Note) Port size of
Applicable tube O.D. Port size/Applicable tube O.D. with sealant
Color 23 ø3.2 M5 M5 X 0.8 style: Only
ø4 M6 M6 X 1.0 R(PT) 1 8
Symbol Body Release button 04
R(PT) 1 4
Thread
2 White Light gray 06 ø6 01 R(PT)1 8, Rc(PT)1 8
R(PT) 3 8
— Black Blue 08 ø8 02 R(PT)1 4, Rc(PT) 1 4
R(PT) 1 2
10 ø10 03 R(PT)3 8, Rc(PT) 3 8
12 ø12 04 R(PT)1 2, Rc(PT) 1 2
16 ø16 00 Same dia. tube
(Reducer)
08 ø8
10 ø10
12 ø12
16 ø16
99 Same dia. rod
Model
Male connector Male branch tee
H Straight union T Union tee
Different dia. straight Different dia. tee∗
S Hexagon socket head male connector TW Cross∗
F Female connector TX Different dia. cross∗
Male elbow TY Different dia. cross∗
Union elbow Y Male run tee
L
Plug-in elbow Male delta
D
Reducer elbow Delta union
Male branch connector Branch “Y”
LU
Branch union elbow Union “Y”
U
K 45° male elbow Different dia. union “Y”
V Universal male elbow Plug-in “Y”
VS Hex. socket head universal male elbow Delta branch
UD
Accessory VF Universal female elbow Different dia. double union “Y”
— Name LF Female elbow XD Double plug-in “Y”
Nipple VD Double universal male elbow X Different dia. plug-in “Y”
KQ2N Different dia. nipple VT Triple universal male elbow R Plug-in reducer
Adapter Z Branch universal male elbow Bulkhead union
E
KQ2C Tube cap ZF Branch universal female elbow Bulkhead connector
KQ2C Color cap ZD Double branch universal male elbow LE Bulkhead male elbow
KQ2P Plug (White) ZT Triple branch universal male elbow
KQP Plug (Blue) Extended plug-in elbow
W
Extended male elbow
∗ Applicable to KQ2 (white body) only.
Note) KQT06-04, KQT08-06, KQT10-08, and
KQT12-10 are available as made to order.
2.1-9
2.0-0 to 2.1-46 2/19/99 4:47 PM Page 2.1-10
∗∗
Packing
Can be used for a wide range Tube
of pressures from a low
vacuum up to a pressure of
1.0MPa Body
The use of a special profile ensures
sealing and reduces resistance when O ring
the tube is inserted. Stud
Thread Effective when piping in a
M, R(PT), Rc(PT) confined space.
The body and threaded portion can turn
PAT. independently.
2.1-10
2.0-0 to 2.1-46 2/19/99 4:48 PM Page 2.1-11
∗∗
Series KQ2
Model
Hex. socket head male connector Universal male elbow
KQ2S P.2.1-13 KQ2V P.2.1-16
Internal hex. allows Universal male elbow
thread connection by allows thread connection
using an Allen wrench by using a socket wrench
for confined spaces. for confined spaces.
2.1-11
2.0-0 to 2.1-46 2/19/99 4:48 PM Page 2.1-12
∗∗
Hex. socket head universal male elbow Triple branch universal male elbow Union “Y”
Used for six branches at
KQ2VS P.2.1-16 Hex. on the top allows KQ2ZT P.2.1-19 KQ2U P.2.1-25
right angles from the Used to connect
thread connection by
female thread. tubes in the same
using an Allen wrench
Three individual parts direction.
for confined spaces.
rotate 360°.
Universal female elbow Used for the same Extended plug-in elbow Plug-in “Y”
KQ2VF P.2.1-17 direction or at right KQ2W When the elbow extends KQ2U P.2.1-26 Used to branch
angles from the male over a standard elbow for
ease of tubing in the same
or female thread. connection/disconnection direction from One-
Multiplex connections P.2.1-20 of tubing. touch fittings.
possible.
Branch universal male elbow Different dia. double union “Y” Adaptor
Hexagonal head allows Used for four branch
KQ2Z P.2.1-18 thread connection by KQ2UD P.2.1-25 connections in the KQ2N P.2.1-28 Used to connect the
using a box wrench. same direction fitting and R (PT)
Used for branch reducing the size of female thread.
connection. the tubes.
Branch universal female elbow Different dia. plug-in “Y” Tube cap
Used for branch line in the
KQ2ZF P.2.1-18 same direction or at right KQ2X P.2.1-26 Used for branch KQ2C P.2.1-28 Kl
angles from the male or connections from the Used to plug the
fitting reducing the size unused tube.
female thread. Multiplex
of tubes.
Ml
connection possible.
Hl
Double branch universal male elbow Double plug-in “Y” Color cap
KQ2ZD P.2.1-19
Used for four branch
KQ2XD P.2.1-26 Used for four branch KQ2C P.2.1-28
Mounted on the Dl
connections at right release button
connections from the
angles from the female corresponding to its
thread. Two individual
fitting reducing the size
applications. MS
of tube.
parts rotate 360° Distinguished by color.
Tl
Male run tee Plug
KQ2Y P.2.1-23 Used for a branch line KQ2P, KQP P.2.1-28 Used to shut unused
in the same direction One-touch fittings.
from female thread KQP (Blue)
and in 90° directions. KQ2P (White)
2.1-12
2.0-0 to 2.1-46 3/3/99 11:03 AM Page 2.1-13
∗∗
Series KQ2
Male connector: KQ2H
H (1) Effective (2)
A∗
<M5, M6> Tube O.D. Thread area (mm2) Weight <M5, M6>
Part No. (Hex.) øD L M
(mm) R(PT) (g)
Nylon Urethane
M5 X 0.8 KQ2H23-M5 7 7 16.7 13.6 12.7 3 2.5 2.1
3.2 18 KQ2H23-01S 10 22 18 9
15.5 3.4 2.9
14 KQ2H23-02S 14 19.5 13.5 16
M5 X 0.8 KQ2H04-M5 8 17 2.4
8 13.9 12.7 4 4
M6 X 1.0 KQ2H04-M6 8 18 2.5
4
18 KQ2H04-01S 10 22 18 9
16 5.6 4
14 KQ2H04-02S 14 19.5 13.5 16
M5 X 0.8 KQ2H06-M5 10 17.8 14.7 3.3
10 13.5 4 4
M6 X 1.0 KQ2H06-M6 10 19 14.9 3.4
6 18 KQ2H06-01S 12 22.5 18.5 16
<R(PT)> 14 KQ2H06-02S 14 23 17 17 13.1 10.4 14 <R(PT)>
38 KQ2H06-03S 17 22 15.5 27
18 KQ2H08-01S 28 24 21
14
14
8 KQ2H08-02S 26.5 20.5 18.5 26.1 18.0 19
38 KQ2H08-03S 17 22 15.5 26
18 KQ2H10-01S 30 26 26.1 26.1 19
14 KQ2H10-02S 17 33.5 27.5 30
10 38
21
KQ2H10-03S 29 22.5 41.5 29.5 30
12 KQ2H10-04S 22 27 19 53
14 KQ2H12-02S 34.5 28.5 42
19
12 38 KQ2H12-03S 23.5 22 58.3 46.1 34
12
30
KQ2H12-04S 22 22 51
38 KQ2H16-03S 39.5 33 81 (81) 61
16 12
24 25.7 25
KQ2H16-04S 35.5 27.5 113 (96) 47
SKQ1, #1 to #24 ∗Reference dimensions after R(PT) thread installation.
Note1) øD: max. diameter
Note2) ( ): Values for soft nylon
Hexagon socket head male connector: KQ2S
<M5, M6> Effective (2)
area (mm2) Weight
(1)
A∗
Tube O.D. Thread H øD1 øD2
(mm) Part No. L M (g)
R(PT) (Hex.) Nylon Urethane <M5, M6> <R(PT)>
M5 X 0.8 KQ2S04-M5 2.5 18.7 15.6 2.7
8 12.7 4 4
4 M6 X 1.0 KQ2S04-M6 18.2 14.1 2.8 KQ2S04 to 12 KQ2S16
18
3
KQ2S04-01S 9.8 23 19 16 4.1 3.6 8
M5 X 0.8 KQ2S06-M5 2.5 19.5 16.4 3.3
10 13.5 4 4
M6 X 1.0 KQ2S06-M6 3 19.1 15 3.4
6
18 KQ2S06-01S 11.8 24 20 10.0 9.9 9
14
4 17
<R(PT)> KQ2S06-02S 13.8 24 18 10.7 10.0 15
18 KQ2S08-01S 5 28 24 17.2 12
14
14
8 KQ2S08-02S 25.5 19.5 18.5 16.2 11
38
6 23.3
KQ2S08-03S 17 27.5 21 24
18 KQ2S10-01S 5 30 26 17.2 10.0 18
14 KQ2S10-02S 17 21.5 12
10 27.5 21
38 KQ2S10-03S 8 21 39.0 26.6 19
12 KQ2S10-04S 22 28 20 35
14 KQ2S12-02S 8 33.5 27.5 46.0 23
38
19
12 KQ2S12-03S 29 22.5 22 44.5 18
10 60.0
12 KQ2S12-04S 22 28 20 30
38 KQ2S16-03S 10 39 32.5 81 (81) 42
16 25.7 24 25
12 KQ2S16-04S 12 35 27 113 (96) 34
KQ2S04 to KQ2S12 SKQ1, #25 to #41 ∗Reference dimensions after R(PT) thread installation.
KQ2S16 SKQ21, #1 to #2 Note1) øD1: max. diameter
Note2) ( ): Values for soft nylon
Female connector: KQ2F
Tube O.D. Thread (1) Effective (2) KQ2F04 to 12
Part No. H øD1 øD2 L1 L2 M area (mm2) Weight
(mm) Rc(PT) (Hex.) (g)
Nylon Urethane
18 KQ2F04-01 14 27 11 15
4 10 16 5.6 4
14 KQ2F04-02 17 31 14 23
18 KQ2F06-01 14 27.5 11 15
6 14 KQ2F06-02 17 12 31 13 17 13.1 10.4 22
38 KQ2F06-03 19 33.5 15 25
18 KQ2F08-01 14 29 11 17
8 14 KQ2F08-02 17 14 32.5 13 18.5 KQ2F16
26.1 18.0 24
38 KQ2F08-03 19 33.5 14 24
14 KQ2F10-02 17 34.5 14 27
10 17 21 41.5 29.5
38 KQ2F10-03 19 36.5 15 30
14 KQ2F12-02 35 36
19 14
12 38 KQ2F12-03 19 37 22 58.3 46.1 31
12 KQ2F12-04 24 41 18 52
38 KQ2F16-03 38 15 81 (81) 59
16 12
24 24 25.7 25
KQ2F16-04 43 19 113 (96) 58
2.1-13 KQ2F04 to KQ2F12 SKQ1, #42 to #54 ∗Reference dimensions after R(PT) thread installation.
KQ2F16 SKQ21, #3 to #4 Note1) øD2: max. diameter
Note2) ( ): Values for soft nylon
2.0-0 to 2.1-46 2/19/99 4:48 PM Page 2.1-14
∗∗
2.1-14
2.0-0 to 2.1-46 2/19/99 4:48 PM Page 2.1-15
∗∗
Series KQ2
2.1-15
2.0-0 to 2.1-46 2/19/99 4:48 PM Page 2.1-16
∗∗
Kl
Ml
Hl
Dl
MS
Tl
2.1-16
2.0-0 to 2.1-46 2/19/99 4:48 PM Page 2.1-17
∗∗
Series KQ2
2.1-17
2.0-0 to 2.1-46 2/19/99 4:48 PM Page 2.1-18
∗∗
4
M5 X 0.8 KQ2ZF04-M5 8
10.4
9.8 19.5 11 20 16.5
16 10.4
8 Kl
18 KQ2ZF04-01S 14 13.4 21 15.5 29.5 25.5 21
18
6 14
KQ2ZF06-01S 14
12.8
13.4 22 15.5 29.5 25.5
17 12.8
24 Ml
KQ2ZF06-02S 19 20.6 25.5 22 41 35 47
18 KQ2ZF08-01S 17 17.6 25.5 17 31 27 32
<R(PT)> 8 14 KQ2ZF08-02S 19
15.2
20.6 27 22 41 35
18.5 15.2
49
Hl
14 KQ2ZF10-02S 19 20.6 29 22 41 35 54
10 38 KQ2ZF10-03S 22
18.5
25.2 31.5 24.5 45.5 39
21 18.5
74 Dl
38 KQ2ZF12-03S 22 25.2 32.5 24.5 45.5 39 77
12 20.9 22 20.9
12 KQ2ZF12-04S 24 27 33 25 50 42 101 <R(PT)> MS
SKQ9, #13 to #22 ∗Reference dimensions after R(PT) thread installation.
Note1) øD1: max. diameter
Tl
2.1-18
2.0-0 to 2.1-46 2/19/99 4:48 PM Page 2.1-19
∗∗
Series KQ2
2.1-19
2.0-0 to 2.1-46 2/19/99 4:48 PM Page 2.1-20
∗∗
2.1-20
2.0-0 to 2.1-46 2/19/99 4:48 PM Page 2.1-21
∗∗
Series KQ2
2.1-21
2.0-0 to 2.1-46 3/3/99 11:04 AM Page 2.1-22
∗∗
Cross: KQ2TW
Tube (1) Effective
O.D. Part No. øD L Q M area (mm2) Weight
(mm) Nylon Urethane (g)
4 KQ2TW04-00 10.4 18 8.7 16 6.4 4.4 9
6 KQ2TW06-00 12.8 20 9.9 17 13.4 10.6 13
8 KQ2TW08-00 15.2 23 11.1 18.5 25.6 17.7 20
10 KQ2TW10-00 18.5 26.5 12.8 21 40 28.4 33 Kl
12 KQ2TW12-00 20.9 28.5 13.9 22 57.4 45.4 39
Note1) øD: max. diameter
Ml
Hl
Dl
Different diameter cross: KQ2TX
Tube O.D. (1) Effective MS
(mm) Part No. øD L Q M1 M2 area (mm2) Weight
(g)
a b Nylon Urethane
Tl
6 8 KQ2TX06-08 15.2 23 11.1 18.5 17 13.4 10.6 13
8 10 KQ2TX08-10 18.5 26.5 12.8 21 18.5 25.6 17.7 27
10 12 KQ2TX10-12 20.9 28.5 13.9 22 21 40 28.4 36
Note1) øD: max. diameter
2.1-22
2.0-0 to 2.1-46 3/3/99 11:04 AM Page 2.1-23
∗∗
Series KQ2
2.1-23
2.0-0 to 2.1-46 2/19/99 4:49 PM Page 2.1-24
∗∗
2.1-24
2.0-0 to 2.1-46 2/19/99 4:49 PM Page 2.1-25
∗∗
Series KQ2
2.1-25
2.0-0 to 2.1-46 3/3/99 11:05 AM Page 2.1-26
∗∗
Kl
Ml
Hl
Dl
MS
Tl
2.1-26
2.0-0 to 2.1-46 2/19/99 4:49 PM Page 2.1-27
∗∗
Series KQ2
2.1-27
2.0-0 to 2.1-46 2/19/99 4:49 PM Page 2.1-28
∗∗
Adaptor: KQ2N
Fitting
Thread H L A M ød Weight
size Part No.
øD R(PT) (Hex.) (g)
M5 X 0.8 KQ2N04-M5 7 32 29 13 2
4 2.5
18 KQ2N04-01S 10 34 30 14 6
M5 X 0.8 KQ2N06-M5 7 33 30 13 2.5 2
6 18 KQ2N06-01S 10 35 31 14 5
4.5
14 KQ2N06-02S 14 37.5 31.5 14.5 14
14 KQ2N08-02S 14 39 33 14.5 17
8 6
38 KQ2N08-03S 17 41 34.5 16 30
10 38 KQ2N10-03S 17 46 39.5 18.5 7.5 31
Nipple: KQ2N
Fitting size Part No. L M ød Weight
øD (g)
4 KQ2N04-99 37 16 2.5 1
6 KQ2N06-99 39 17 4 2
8 KQ2N08-99 43 18.5 6 2
10 KQ2N10-99 49 21 7.5 4
12 KQ2N12-99 52 22 9 20.6
16 KQ2N16-99 57 25 13 31
∗∗
Series KQ2
Made to Order
Consult SMC for detailed specifications, dimentions and delivery.
Ordeer
Mad
2.1-29
2.0-0 to 2.1-46 2/19/99 4:50 PM Page 2.1-35
∗∗
Series KM
Compact piping. Model
Many varieties (40 types) Model
Porting Number of Port B Port A size
available. Port A Port B Port A size ø4 ø6 ø8
ø8
One-touch fittings give KM11
One-touch One-touch
6, 10 ø10
fitting fitting
the most efficient ø12
operation. KM12 One-touch fitting Rc(PT)female thread 6, 10
Rc(PT) 1 4
Rc(PT) 3 8
ø6
One-touch One-touch
KM13 3 ø8
fitting fitting
ø10
ø6, R(PT) 1 8
ø6, R(PT) 1 4
KM11 ø6, R(PT) 3 8
ø8 ,R(PT) 1 8
One-touch fitting
KM14 One-touch R(PT)male thread 3 ø8, R(PT) 1 4
fitting ø8, R(PT) 3 8
ø10, R(PT) 1 4
ø10, R(PT) 3 8
KM12 ø10, R(PT) 1 4
ø6
One-touch One-touch fitting
KM15 Rod 3 ø8
fitting
KM15 ø10
ø4
KM16 One-touch fitting One-touch fitting 3
ø6
KM16
KM14
KM13
Applicable Tubing
Tube material Nylon, Soft nylon, Polyurethane
Tube O.D. ø4, ø6, ø8, ø10, ø12
Specifications
Model KM11 KM12 KM13 KM14 KM15 KM16
Fluid Air, Water (1)
Max. operating pressure 1.0MPa
Proof pressure 3.0MPa
Ambient and fluid temperature –5 to 60°C, Water: 0 to 40°C (No freezing)
Thread – JIS B0203 (Taper thread) – JIS B0203 (Taper thread) – –
Hexagon socket head
Accessories None blank plug None None None None
with sealant: 1 pc.
Note1) Applicable for general industry water. Consult SMC if using for other kinds of fluid.
Surge pressure must be under the max. operating pressure.
Component Materials
Model KM11 KM12 KM13 KM14 KM15 KM16
Body PBT
Stud – C3604BD – C3604BD C3604BD·PBT –
Chuck Stainless steel (SUS304)
Guide C3604BD, Stainless steel (SUS304)
Collet, Release button Polyacetal (POM)
Packing, O ring NBR
2.1-35
2.0-0 to 2.1-46 2/19/99 4:50 PM Page 2.1-36
Construction
KM11 KM12
KM13 KM14
KM15 KM16
2.1-36
2.0-0 to 2.1-46 2/19/99 4:50 PM Page 2.1-37
∗∗
Series KM
KM11
KM12
KM13
2.1-37
2.0-0 to 2.1-46 2/19/99 4:50 PM Page 2.1-38
∗∗
KM14
KM15
Precautions for the use with One-touch fittings
Caution
Refer to “Air Fittings & Tubing Precautions” for
the details of installation/removal of One-touch
fittings.
∗∗
Miniature Fittings
M3, M5, R(PT)1/8
Series M
Hose nipple Barb fitting
Tube
Either nylon, soft
Barb nylon and polyurethane
Easy tube insertion tubing. Barb
High retaining force Easy tube insertion Tube
High retaining force
PAT.
Electroless
Nylon
nickel plated
tube
(Silver color)
R(PT)1 8 ,
M5
Soft nylon Electroless
tube nickel plated
Polyurethane (Black color)
tube [Except stud]
2.1-47
2.1-47 to 52 3/3/99 3:34 PM Page 2.1-48
∗∗
Series/Model Style Application Note Series/Model Style Application Note Series/Model Style Application Note
Barb fitting For soft nylon ø3.18/2.18 Barb fitting Tee M5 female
ø4/2.5
tube X M3 M-5AN-4 Both sides X M5
M-3AU-3 For nylon X M3
For polyure- ø3.18/2 M-5T allows 90° female
tube
thane tube X M3 ø6/4 connection X M5
M-5AN-6
For soft nylon X M5 P.2.1-51 female
ø4/2.5 P.2.1-50
M-3AU-4 and polyure- Universal Body
X M3 Barb fitting For soft nylon ø3.18/2.18
P.2.1-49 thane tube elbow M5 female
tube X M5 rotates
Barb fitting Soft M-5AU-3 M-5UL at 360° X M5
nylon
ø3.18/2.18 For polyure- ø3.18/2
around the male
tube X M3 thane tube X M5 stud axis
M-3ALU-3 P.2.1-51
Body ø4/2.5
poly- ø3.18/2 M-5AU-4 For soft nylon Universal tee
rotates X M5 Body M5 female
urethane X M3 and polyure-
360˚ X M5
around ø6/4 rotates
M-5AU-6 thane tube M-5UT female
the stud soft P.2.1-50 X M5 at 360°
M-3ALU-4 axis. nylon and ø4/2.5 around the X M5
Barb elbow
P.2.1-49
poly- X M3 M-5ALN-4 OFor nylon tube
ø4/2.5 P.2.1-51 stud axis male
urethane X M5
OBody rotates Extention Solid piece
Universal at 360° fitting moves M5 male
ø6/4
elbow Body rotates M-5ALN-6 around stud M-5J fitting X M5
X M5
at 360° M3 female P.2.1-50 up from female
M-3UL around the X M3 male Barb elbow soft ø3.18/2.18
stud axis nylon P.2.1-51 workpiece
Body X M5
P.2.1-49 M-5ALU-3 Nipple Fitting to
M3 rotates poly- ø3.18/2
Universal tee at 360° urethane X M5 workpiece
M5 male
Body rotates around M-5N and fitting -
M3 female ø4/2.5 X M5 male
M-5ALU-4 the soft fitting
M-3UT at 360°
around the X M3 female stud nylon
and poly-
X M5
P.2.1-51 connection
stud axis X M3 male axis urethane ø6/4
M-5ALU-6 Union nipple
P.2.1-49 P.2.1-50 X M5 Body M5 male
Nipple Barb elbow (H) Body rotates X M5
Fitting to work- ø4/2.5 M-5UN at 360°
M-5ALHN-4 rotates male
piece and at 360° For nylon X M5 around the
M3 male stud axis PAT
M-3N fitting around tube P.2.1-51
X M3 male the
- fitting connec- M5 M-5ALHN-6 ø6/4 M5
stud Bulkhead
P.2.1-49 tion possible P.2.1-50 axis X M5 union Panel
M5 female
Plug Barb elbow (H) soft ø3.18/2.18 M-5E mount
nylon X M5
X M5 connection
M-5ALHU-3 Body female
To plug unused rotates poly- ø3.18/2
M-3P P.2.1-51
M3 port at 360° urethane X M5
around Bulkhead
ø4/2.5 reducer Reduction
P.2.1-49 the soft
M-5ALHU-4 stud nylon and
from Rc(PT)1/8 Rc(PT)1/8
X M5 M-5ER to M5 and
Gasket axis poly- X M5
ø6/4 includes panel
urethane mounting female
M-5ALHU-6
To seal M3 P.2.1-50 X M5 P.2.1-52
M-3G
thread Hose nipple Manifold Rc(PT)1/8 can
ø4/2.5
M-5H-4 be diverted in
P.2.1-49 For nylon, soft X M5 up to 9, M5 Rc(PT)1/8
nylon, and poly- M-5M stations, X M5
urethane tube ø6/4 includes panel female
M-5H-6 or bracket
X M5 P.2.1-52 mounting (9 stations)
Series/Model Style Application Note P.2.1-50
Barb fitting Hose elbow Reducer
ø4/2.5 X ø4/2.5
M-01AN-4
R(PT)1/8
M-5HL-4
X M5
bushing
For reducing
Rc(PT)1/8 Rc(PT)1/8
Kl
For nylon tube OFor nylon, M-5B
female to X M5
soft nylon, and
M-01AN-6
ø6/4 X
M-5HL-6 polyurethane
ø6/4 M5 female female Ml
R(PT)1/8 X M5 P.2.1-52
P.2.1-49 P.2.1-51 tube
Plug
Barb fitting ø4/2.5 X Hose elbow (H) OBody rotates ø4/2.5 To plug Hl
M-01AU-4 For soft nylon M-5HLH-4 at 360° M-5P unused
R R(PT)1/8 X M5
around the M5 port
(PT) and polyurethane
stud axis P.2.1-52 Dl
18 tube ø6/4 X ø6/4 Gasket
M-01AU-6 M-5HLH-6
R(PT)1/8 X M5 To seal M5 Material:
P.2.1-49 P.2.1-51 M-5G1 thread PVC MS
Hose nipple ø4/2.5 X Elbow
M-01H-4 P.2.1-52
For nylon, soft
nylon and poly-
R(PT)1/8
M-5L
One-sided 90° M5 female Gasket (H) M-5ALl-6
Material:
Tl
elbow X M5 M-5ALHl-6
urethane tube ø6/4 X M-5GH Nylon66
M-01H-6 female M-5HL-4, 6
R(PT)1/8
P.2.1-49 P.2.1-51 P.2.1-52 M-5HLH-4, 6 GF30%
2.1-48
2.1-47 to 52 2/19/99 5:05 PM Page 2.1-49
∗∗
Series M
Series M3
Barb fitting for soft tube: M-3AU-3 Barb fitting for soft tube: M-3AU-4
Effective area: 0.9mm2 Weight: 0.6g Effective area: 0.9mm2 Weight: 0.7g
Barb elbow for soft tube: M-3ALU-3 Barb elbow for soft tube: M-3ALU-4
Effective area: 0.6mm2 Weight: 0.8g Effective area: 0.6mm2 Weight: 0.9g
Effective area: 0.6mm2 Weight: 1.6g Effective area: 0.6mm2 Weight: 1.4g
Weight: 0.6g
Effective area: 0.9mm2 Weight: 0.005g Weight: 0.5g
SM3A, #1 to #7
Series R(PT)1/8
Barb fitting for nylon tube, soft tube: M-01Al-4, -6
Effective Weight
Tube Part No. A B øC
area (mm2) (g)
M-01AN-4 16 5 1.8 2.1 6.4
Nylon tube
M-01AN-6 18 7 2.5 4.0 6.6
M-01AU-4 16 5 1.8 2.1 6.5
Soft tube
M-01AU-6 18 7 2.5 4.0 6.7
SM3A, #8 to #11
2.1-49
2.1-47 to 52 3/3/99 3:35 PM Page 2.1-50
∗∗
Series M5
Barb fitting for nylon tube: M-5AN-4, -6
Effective Weight
Part No. A B øC area (mm2) (g)
M-5AN-4 12 5 1.8 2.1 1.6
M-5AN-6 14 8 2.5 4.0 1.7
SM5B, #1/#2
M-5ALHN-6 Kl
M-5ALHU-6
Ml
Hl
Dl
MS
Hose nipple: M-5H-4, -6
Part No. A B C øD øE H
Effective Weight Tl
area (mm2) (g)
M-5H-4 15.5 8.5 7 1.8 6.5 7 2.1 2.7
M-5H-6 16.5 9.5 8 2.5 8.5 8 4.0 3.9
SM5B, #16/#17
2.1-50
2.1-47 to 52 2/19/99 5:05 PM Page 2.1-51
∗∗
Series M
Series M5
Hose elbow: M-5HL-4, -6
Effective Weight
Part No. A B C D øE øF
area (mm2) (g)
M-5HL-4 16.5 12.5 8.5 7 1.8 6.5 1.4 4.4
M-5HL-6 17.5 13.5 9.5 8 2.5 8.5 2.4 5.2
SM5B, #18/#19
Effective area: 2.4mm2 Weight: 5.3g Effective area: 2.4mm2 Weight: 4.8g
Effective area: 4.0mm2 Weight: 3.6g Effective area: 4.0mm2 Weight: 1.5g
2.1-51
2.1-47 to 52 2/19/99 5:05 PM Page 2.1-52
∗∗
Series M5
Bulkhead reducer: M-5ER Manifold: M-5M
Precautions
Be sure to read before handling.
Refer to p.0-26 and 0-27 for Safety Instructions and common precautions on the products mentioned
in this catalog, and refer to p.2.0-7 and 2.0-8 for more detailed precautions of every series.
Tightening of M3 or M5 thread Use of tubing with hose nipple Use of tube with barb fitting Kl
Caution Caution Caution Ml
qTighten by hand, and give it an additional qCut the tube perpendicularly to the tube qCut the tube perpendicularly to the tube
1/4 rotation with wrench. (The additional axis to a little longer length than required axis with a little longer length than required
rotation should be doubled to 1/2 when length. (Use tube cutter “TK-1”, “TK-2” or length. (Use tube cutter “TK-1”, “TK-2” or Hl
using the universal elbow, universal tee, “TK-3”.) “TK-3”.)
etc. which have two gaskets.) If tightened wPass the tubing through the cap nut. wPush the tube in until it comes to the end Dl
too much, thread portion may be damaged ePush the tube until it comes to the end of of the barb portion, or it may cause air
and gasket may be deformed. This will the barb portion, or it may cause air leak- leakage or hose releasing. MS
cause air leakage. On the contrary, if tight- age or hose releasing.
ening is not sufficient, thread may loosen rTighten the cap nut firmly by hand on the
causing air leakage. fitting. Tl
2.1-52
2.1-59 to 64 3/4/99 5:54 PM Page 2.1-59
∗∗
Self-seal Fittings
Series KC
Before Insertion of Tube After Insertion of Tube
O ring Valve
Built-in self-seal mechanism
Retainer Air does not exhaust after
removal of tube.
Spring Stopper
Tube
Cushion
Release button
Guide
Collet
O ring Body Chuck
PAT.
Applicable Tubing
One-touch fitting (With built-in self- Tube material Nylon, Soft nylon, Polyurethane
Tube O.D. ø4, ø6, ø8, ø10, ø12
seal mechanism) to prevent air
exhaust when removing tube.
Specifications
Best for multiple use Operating fluid Air
Max. operating pressure 1.0MPa
areas when pressure Proof pressure 3.0MPa
cannot be shut down. Ambient and fluid temperature –5 to 60°C (No freezing)
Thread portion JIB B0203 (Taper pipe thread)
10 styles are available. Thread
Nut JIB B0211 Class 2 (Metric fine thread)
Sealant (Thread portion) With sealant (Standard)
Electroless nickel plated for Copper-free application All brass parts with electroless nickel plated
copper-free applications.
Component Materials
Body C3604BD, PBT
Stud C3604BD (Thread portion)
Chuck, Spring Stainless Steel (SUS304)
Guide SUS304, C3604BD, Polyacetal (POM)
Collet, Release button Polyacetal (POM)
Valve, Retainer Polyacetal (POM)
Stopper C3604BD, Polyacetal (POM)
Packing, O ring NBR
2.1-59
2.1-59 to 64 2/19/99 5:11 PM Page 2.1-60
∗∗
Model
Union “Y”
KCU P.2.1-62 Used to connect
tubes in the same
direction.2 branched
ports has a self-seal
function.
Check adaptor
KCJ P.2.1-63 Used to add the
self-seal mechanism
to the usual One-
touch fittings,
Series KQ.
Bulkhead union
Used for junction
KCE P.2.1-63 connection of tubes
for installation on a
panel. One of two
ports has a self-seal
function.
2.1-60
2.1-59 to 64 2/19/99 5:11 PM Page 2.1-61
Series KC
Precautions
Be sure to read before handling. Refer to p.0-26 and 0-27 for Safety Instructions
and common precautions on the products mentioned in this catalog, and refer to
p.2.0-7 and 2.0-8 for more detailed precautions of every series.
Caution Caution
PInstalling Tube qFirst, tighten it by hand, then give it an
qCut the tube perpendicularly, taking care additional 1/6 turn with a wrench.
not to damage the outside surface. (Use Excessive tightening may damage the
tube cutter TK-1, 2 or 3. Do not cut the threaded portion or deform the gasket to
tube with cutting pliers, nippers, scissors, cause air leakage. Insufficient tightening
etc.) Flat or angled cuts will make it difficult may leave the thread loosened or cause
to connect to fittings or, if connected, tube air leakage.
will release or air leakage will occur.
wGrasp the tube, then slowly push it until it Distinction of plug and
comes to a stop. applicable fitting
ePull it back gently to make sure that it has
a positive seal. Caution
Incomplete installation may cause air qThe applicable fitting should be chosen
leakage or tube release. depending on the style of plug.
PRemoving Tube O Check adaptor
qPush the release button into the fitting. How to use: Use it for addition of self-
The button should be pushed evenly. seal mechanism to a standard One-
wPull out the tube while keeping the touch fitting series KQ.
release button depressed. (If the release Self-seal fittings with check adaptor are
button is not held down, the tube cannot not available. It causes the air leakage.
be withdrawn.)
eTo reuse the tubing, cut off the previously
lodged portion of the tube.
Check adaptor One-touch fitting
If using tubing without cutting the damaged KCJl-99 series KQ
portion off, it may cause the air leakage or
O Elbow plug for frequent use, straight
make it difficult to release the tube.
plug for frequent use.
How to use: For use in the case of fre-
The Number of Insertions and quent tube installation and removing,
Removals from Self-seal Fitting tube cutting labor can be saved. These
plugs are not available for a standard
Caution One-touch fittings Series KQ.
qThe number of insertions and removals If trying to install the plug into a KQ, plug
as a rough quide is as follows. will jump out of the fitting. Note the
OTube……………300 times exclusive marking for self-seal fittings
OMetal stem……1000 times before use.
Marking exclusive to
self-seal fitting
Installation of Self-seal Fitting
Caution Elbow plug for frequent use
KCLl-99
qThe fitting should be installed (Installation Marking
of R (PT) thread portion) by screwing Self-seal fitting
Series KC
with a spanner at the hexagonal portion Built-in self-seal
Straight plug for frequent use mechanism
of the body. KCHl-99
The position of spanner should be a root
as close as possible to R (PT) thread. Tube Insertion and Removal
Use the spanner corresponding to the under a pressurized condition
size of hexagonal portion, or hexagonal
portion may be deformed. Caution
qWhen inserting/removing of the tube is
difficult under a pressurized condition, it
should be inserted or removed by lower-
ing the pressure or after fully exhausting.
2.1-61
2.1-59 to 64 2/19/99 5:11 PM Page 2.1-62
∗∗
Kl
Ml
Hl
Union “Y”: KCU
Tube O.D. (1)
Effective
Weight
Dl
Part No. øD L1 L2 P Q M1 M2 area (mm2)
(mm) (g)
Nylon Urethane MS
4 KCU04-00 10.4 43.1 27.3 10.4 10.6 18 16 3.7 3.7 8
6 KCU06-00 12.8 48 31.2 12.8 12.5 19 17 10.0 10.0 14
8 KCU08-00 15.2 57.6 38.9 15.2 14.7 21.5 18.5 21.7 15.1 22
Tl
10 KCU10-00 18.5 65.2 44.9 18.5 17.1 24 21 33.3 25.6 37
12 KCU12-00 20.9 70.1 48.8 20.9 19.1 25.5 22 48.9 38.7 49
Note1) øD: max. diameter
2.1-62
2.1-59 to 64 2/19/99 5:12 PM Page 2.1-63
∗∗
Series KC
Mounting
Effective
Tube O.D. T H
hole
Part No. L M1 M2 area (mm2) Weight
(mm) (M) (Hex.) (g)
Nylon Urethane
4 KCE04-00 M12 X 1 14 42 13 18 16 2.6 2.6 21
6 KCE06-00 M14 X 1 17 45.5 15 19 17 6.8 6.8 30
8 KCE08-00 M16 X 1 19 52.5 17 21.5 18.5 16.2 13.1 39
10 KCE10-00 M20 X 1 24 59.5 21 24 21 25.6 20.4 84
12 KCE12-00 M22 X 1 27 63.2 23 25.5 22 35.4 30.4 115
2.1-63
2.1-59 to 64 2/19/99 5:12 PM Page 2.1-64
∗∗
Kl
Ml
Hl
Dl
MS
Tl
2.1-64
2.1-65 to 68 2/19/99 5:14 PM Page 2.1-65
∗∗
Multi-connector
Series DM
The use of the multi-connector enables
panel mount connections with other
apparatus and can provide the reliability
of one-touch installation and removal of Socket
multi-tubes(nylon, polyurethane). As a Plug case
Socket case Hold surely by inserting the both
result, separate transportation of panel of tube and barb.
Plug
and machinery equipment and backup Easy insertion of tube by the
Possible to connect in the required
position by the convex and
unit exchange are made possible. floating mechanism to adjust
concave for engagement.
to the case hole.
Specifications
Operating fluid Air
Max. operating pressure 1.0MPa
DM6 Ambient and fluid temperature –5 to 60°C (No freezing)
Component Materials
Socket case, Plug case, Clamp ring ADC12 Black anodized
Plate SPCC, Chromated
Holder SPCC, Zinc chromated
Socket, Plug, Stopper C3604BD
U packing NBR
Cover CR
Cross recessed head screw, Clamp bolt SWRM Zinc chromated
Spacer SPC Zinc chromated
DM12
2.1-65
2.1-65 to 68 3/4/99 5:56 PM Page 2.1-66
∗∗
Multi-connector Series DM
How to Use
Caution
Removing Clamping of tube
Loosen clamp ring q, and separate the multi- qAfter inserting tube, tighten clamp bolt y
connector into two parts, socket side and plug clockwise with a screwdriver.
side. wBarb cassette creeps into the direction D and
the tube will be clamped at the B clamp portion
t consisting of barb e and case.
Connection
qPush together and rotate both of the
cases, and the plug side will slide into the
socket side at the proper position.
wThe ring E, male and female, of the plug
side and socket side will interlock with each
other at the proper position by pushing
together and rotating.
eFinal process of connection is to screw-in
the clamp ring.
qTurn the clamp bolt y to the left with a
screwdriver, loosen until the stopper w
touches the case e, and barb cassette r will
be pulled out in the direction A.Then clamp
portion B, consisting of barb t and case e,
will be freed. Next, insert or remove the tube.
wThe corresponding numbers are stamped
on both the socket and plug sides for each
tube connection.
eIf it is hard to insert the tube, enlarge the
tube end with the head of stopper, expander Cover mounting
C, before inserting tube. qCover is mountable on both sides, plug
rInsert tube until it clears mountain of side and socket side.
barb t completely. wEnlarge cover and mount cover onto
mounting area.
Kl
How to Order Ml
Hl
DM 6 04 N
Number of
connecting Dl
tubes
6 6 Accessories (optional) MS
12 12 C1 1 cover (One side)
C2 2 covers (Both sides) Tl
Style
— Multi-connector
Tube material
P Plug side
N Nylon
S Socket side
Soft nylon
NU
Polyurethane
Tube O.D.
04 4mm
06 6mm
2.1-66
2.1-65 to 68 2/19/99 5:14 PM Page 2.1-67
∗∗
Series DM
Dimensions/DM6,12
DM6
DM12
2.1-67
2.1-65 to 68 2/19/99 5:14 PM Page 2.1-68
Multi-connector Series DM
Precautions
Be sure to read before handling. Refer to p.0-26 and 0-27 for Safety Instructions
and common precautions on the products mentioned in this catalog, and refer
to p.2.0-7 and 2.0-8 for more detailed precautions of every series.
Insertion of tube
Caution
qBe sure to insert the tube slowly so that you will feel it move smoothly and can feel it touch
the end. Once the tube has been properly inserted, pull it back gently, to make sure that it
has a positive seal. If not inserted properly, it may cause the air leakage or tube releasing.
wIn case the number of tubes to be used is less than 6 (DM6) or 12 (DM12), the positioning
of the tube should be symmetrical to the center.
Kl
Ml
Hl
Dl
MS
Tl
2.1-68
2.1-69 to 2.3-8 2/19/99 4:12 PM Page 2.1-69
∗∗
Rectangular Multi-connector
Connecting Tube: 10, 20
Series KDM
Multi-connector is effective in saving
Screw for bracket
labor for separate transportation of Panel mounting bracket
E type snap ring
the panel and the machine and for Plate (Standard)
exchanging units due to failure. Operation on the panel front permits mount-
ing. Holes for mounting bolts are not neces-
sary. (Mountable panel thickness is 5mm
maximum.)
Substantial reduction
in mounting space Plug connector
In comparison with a model requiring many Clamp bolt
Socket connector
union joints for panels and partitions, this
model needs only a small space.
One-touch connection/
disconnection of connector
Multiple pipes can be connected/disconnect- PAT.PEND Socket case
ed in one-touch opperation without connec- Packing With One-touch fittings
Plug case
tion error. Thus man-hours for connection/dis- Usable from vacuum to Metric size: ø3.2, ø4, ø6, ø8
connection is cut down substantially. 1MPa. Applicable to non-copper style Irregular shape permits
(nickel plated) engagement in a proper
Tubes of different sizes can be position.
One-touch tube connection used simultaneously.
Two types, with 10 and 20
One-touch fittings substantially cuts down connector tubes, are available.
man-hours for piping.
Model
No. of connecting tubes Tube O.D. Part No. Weight Color of release button
ø3.2 KDM10-23
ø4 KDM10-04 300g
10
ø6 KDM10-06
ø8 KDM10-08 520g
Blue
ø3.2 KDM20-23
KDM20
ø4 KDM20-04 520g
20
ø6 KDM20-06
ø8 KDM20-08 950g
Applicable Tubing
Tube material Nylon, Soft nylon, Polyurethane
Tube O.D. ø3.2, ø4, ø6, ø8
KDM10
Specifications
Operating fluid Air
Max.operating pressure 1.0MPa
Max.operating vacuum pressure –100kPa
Proof pressure 1.5MPa
Ambient and fluid temperature –5 to 60°C (No freezing)
Caution
Be sure to read before handling.
Refer to p.0-26 and 0-27 for Safety
Instructions and common
precautions on the products
mentioned in this catalog, and refer
to p.2.0-7 and 2.0-8 for more detailed
precautions of every series.
2.1-69
2.1-69 to 2.3-8 2/19/99 4:13 PM Page 2.1-70
∗∗
Connection
Put together the irregular faces for engage-
Part Numbers ment and connect the plug case to the sock-
No.of connecting Tube Part No. Color of et. After tightening the clamp bolt by hand,
tubes O.D. Plug Socket release button tighten it further with allen wrench(nominal
ø3.2 KDM10P-23 KDM10S-23 width across flats: 4).
ø4 KDM10P-04 KDM10S-04
10
ø6 KDM10P-06 KDM10S-06
ø8 KDM10P-08 KDM10S-08
Blue
ø3.2 KDM20P-23 KDM20S-23
ø4 KDM20P-04 KDM20S-04
20
ø6 KDM20P-06 KDM20S-06
ø8 KDM20P-08 KDM20S-08
Part Numbers
Color of
Connector Tube O.D. Part No.
release button
ø3.2 KDMP-23
wShift the panel mounting bracket to the
Plug connector ø4 KDMP-04 inside (Move the screw for bracket in the
ø6 KDMP-06 longitudinal direction of the slot) and put
ø8 KDMP-08 the connector in the panel mounting hole.
Blue
ø3.2 KDMS-23 (Panel mounting hole: See Dimensions.)
Socket co nnector ø4 KDMS-04
(With packing) ø6 KDMS-06
ø8 KDMS-08
2.1-70
2.1-69 to 2.3-8 2/19/99 4:13 PM Page 2.1-71
∗∗
Series KDM
Dimensions
KDM10
( ): Dimensions for KDM10-08
KDM20
( ): Dimensions for KDM20-08
KDM10 SKDM102, #1 to #4
KDM20 SKDM202, #1 to #4
Made to Order
Contact SMC for detailed specifications,
dimensions and delivery.
2.1-71
2.1-69 to 2.3-8 2/19/99 4:16 PM Page 2.2-1
∗∗
Series KJ
Applicable Tubing — ø1/8”, ø5/32”, ø1/4” Thread — 10-32UNF, NPT1/16, NPT1/8
Packing
Can be used for a wide range of Tube
pressures from a low vacuum up
to a pressure of 1.0MPa.
Body (White)
The use of a special profile ensures O ring
sealing and reduces resistance
when the tube is inserted.
Stud
Possible to tube in narrower space.
• The body and threaded portion
can turn independently.
• Stud is electroless nickel plated.
PAT.PEND
Optimum piping in less space
with 20% reduction of the outside Applicable Tubing
Tube material Nylon, Soft nylon, Polyurethane
diameter Tube O.D. ø1 8, ø5 32 , ø1 4
Thread sealant as standard
Specifications
Possible to use in application
Operating fluid Air, Water (1)
where copper-free material is Max. operating pressure 1.0MPa
required. Max. operating vacuum pressure –100kPa
Proof pressure 3.0MPa
Possible to use in vacuum: Ambient and fluid temperature –5 to 60°C (Water: 0 to 40°C) (No freezing)
–100kPa Thread portion
ANSI/ASMEB1.20.1-1983 (NPT thread),
Thread JIS B0212 2A, Class 2B (UNF thread)
Nut JIS B0212 2A, Class 2B (UNF thread)
Sealant (Thread portion) With sealant (Standard)
Copper-free specification All brass parts electroless nickel plated
Note1) Applicable for general industry water. Consult SMC if using for other kinds of fluid.
Surge pressure must be under the max. operating pressure.
Component Materials
Body SUS303, C3604BD, PBT
Stud C3604BD (Thread portion)
Chuck, Guide 2 SUS304
Release button, Guide 1 POM
Packing, O ring NBR
Gasket SUS304, NBR
2.2-1
2.1-69 to 2.3-8 2/19/99 4:16 PM Page 2.2-2
∗∗
Model
Hex. socket head male connector Internal hex. allows Bulkhead union Extended male elbow When the elbow
Used to connect two
KJS P.2.2-3 thread connection KJE P.2.2-8 tubes through a panel. KJW P.2.2-5 extends over a standard
by using a hex. key elbow for ease of
wrench, for connection/
confined spaces. disconnection of tubing.
Male connector Used to pipe in the same Plug-in elbow Used to change by Union “Y”
KJH P.2.3-3 direction from female KJL P.2.2-4 90° in a tube fetching KJU P.2.2-7 Used connect tubes in
threaded portion. direction from One- the same direction.
Most common style. touch fittings.
Female connector Reducer elbow Used to change by 90° Different dia. union “Y”
Used to pipe from male Used to connect tubes
KJF P.2.2-3 KJL P.2.2-5 in tube fetching direction KJU P.2.2-7
threaded portion such with size down
from One-touch fittings
as pressure gauge. in the same direction.
and to size down.
Different dia. straight Union tee Different dia. plug in “Y” Used branch line of
Used to connect
KJH P.2.2-4 KJT P.2.2-6 Used to connect tubes KJX P.2.2-7 size down in the same
different
in both 90° directions. direction with One-
size tubes.
touch fittings.
Male elbow Used to pipe at right Different dia. tee Branch “Y”
Used to connect tubes Used to branch line in
KJL P.2.2-4 angles to female KJT P.2.2-6 KJU P.2.2-8 the same direction
with size down in both
threaded portion. from female thread.
90° directions.
Most common style.
Union elbow Male run tee Used to branch line in Plug-in reducer
KJL P.2.2-4 Used to connect tubes KJY P.2.2-6 the same direction from KJR P.2.2-8 Used to change size of
at right angles. female thread and in 90° One-touch fittings.
directions.
Precautions Kl
Be sure to read before handling. Ml
Refer to p.0-26 and 0-27 for Safety Instructions and common precautions on the products mentioned
in this catalog, and refer to p.2.0-7 and 2.0-8 for more detailed precautions of every series. Hl
2.2-2
2.1-69 to 2.3-8 2/19/99 4:16 PM Page 2.2-3
∗∗
Series KJ
2.2-3
2.1-69 to 2.3-8 2/19/99 4:16 PM Page 2.2-4
∗∗
Kl
Tl
2.2-4
2.1-69 to 2.3-8 2/19/99 4:16 PM Page 2.2-5
∗∗
Series KJ
2.2-5
2.1-69 to 2.3-8 2/19/99 4:17 PM Page 2.2-6
∗∗
2.2-6
2.1-69 to 2.3-8 2/19/99 4:17 PM Page 2.2-7
∗∗
Series KJ
2.2-7
2.1-69 to 2.3-8 2/19/99 4:17 PM Page 2.2-8
∗∗
<NPT>
<NPT>
Kl
Bulkhead union: KJE Ml
Tube Thread Min. Weight
H Mounting
O.D. Part No. (T)
(Hex.)
L hole
hole
M
(g) Hl
(inch) UNF dia.
18 KJE01-00 3 8 -24 12.7 26 10.5 12.7 2.5
5 32 KJE03-00 3 8 -24 12.7 26 10.5 12.7 3
8.1 Dl
14 KJE07-00 1 2 -20 15.88 27.8 14 13.6 4.6 15.7
MS
Tl
2.2-8
2.1-69 to 2.3-8 2/19/99 4:17 PM Page 2.2-9
∗∗
Series KQ2
Applicable Tubing — Inch Size Thread — UNF, NPT
Packing
Can be used for a wide range Tube
of pressures from a low vacuum Inch-sizes
up to a pressure of 1.0MPa. 1 8", 5 32 ", 3 16 ", 1 4", 5 16 ", 3 8 ", 1 2"
The use of a special profile ensures
sealing and reduces resistance Body
when the tube is inserted.
O ring
Stud
Thread Effective when piping in a confined spaces.
UNF, NPT The body and threaded portion can turn independently.
PAT.
Applicable Tubing
Tube material Nylon, Soft nylon, Polyurethane
Tube O.D. (inch) ø 1 8, ø 5 32 , ø 3 16, ø 1 4 , ø5 16 , ø3 8, ø 1 2
Specifications
Operating fluid Air, Water (1)
Max. operating pressure 1.0MPa
Proof pressure 3.0MPa
Ambient and fluid temperature –5 to 60°C (Water: 0 to 40°C)
ANSI/ASMEB1.20.1-1983 (NTP thread)
Thread portion
Thread JIS B0212 2A, Class 2B (UNF thread)
Nut JIS B 0212 2A, Class 2B (UNF thread)
Sealant (Thread portion) With sealant
Color
Note1) Applicable for general industry water. Consult SMC if using for other
Series Body Release button kind of fluids. Surge pressure must be under the max. operating pressure.
KQ2 White Orange
KQ Black Red Component Materials
Body C3604BD, PBT, PP
Stud C3604BD (Thread portion)
Chuck Stainless Steel (SUS304)
Guide Stainless Steel (SUS304), C3604BD, POM
Collet POM
Release button POM
Packing, O ring NBR
Gasket PVC
2.2-9
2.1-69 to 2.3-8 3/4/99 8:24 AM Page 2.2-10
∗∗
Model
Male connector Extended male elbow For when the elbow Plug-in ”Y”
Used to pipe in the
KQ2H P.2.2-11 KQ2W P.2.2-12 extends over a standard KQ2U P.2.2-14 Used to branch tubing
same direction from
elbow for easier of in the same direction
female threaded
connection/disconnection from One-touch
portion.
of tubing. fittings.
Most common style.
How to Order
KQ 2 H 05 34 S
Sealant Kl
— Without sealant
One-touch S Sealant Ml
fitting Model Applicable
Male connector∗ tube diameter Port size Hl
H
Color Straight union 01 18 32 10-32UNF
Symbol Body Release button Male elbow∗ 03 5 32 33 NPT 1 6 Dl
2 White Orange Union elbow 05 3 16 34 NPT 1 8
L
— Black Red Plug-in elbow 07 14 35 NPT 1 4
Reducer elbow 09 5 16 36 NPT 3 8
MS
W Extended male elbow∗ 11 38 37 NPT 1 2
Male branch tee∗ 13 12 00 Same dia. tube Tl
T
Accessory Union tee 99 Same dia. rod
Y Male run tee∗ 01 1 8 Tube
Union “Y” 03 5 32 Tube
Symbol Description
KQ2P, KQP Plug (Orange) U Plug-in “Y”∗ 05 3 16 Tube
Branch “Y” 07 1 4 Tube
∗∗
Series KQ2
∗∗∗
2.2-12
2.1-69 to 2.3-8 2/19/99 4:17 PM Page 2.2-13
∗∗
Series KQ2
2.2-13
2.1-69 to 2.3-8 3/3/99 9:11 PM Page 2.2-14
∗∗
∗∗
Series KQ2
10-32UNF 10-32UNF 5 32
Hex. Triple
socket NPT 1 8 universal NPT 1 8 Different 3 16
head male KQ2S NPT 1 4 KQ2VT NPT 1 4 dia. KQ2U
1 4
male
NPT 3 8 NPT 3 8 union "Y"
5 16
connector NPT 1 2 elbow NPT 1 2 3 8
10-32UNF Double NPT 1 8 1 2
45° NPT 1 8 branch NPT 1 4
universal KQ2ZD
male KQ2K NPT 1 4 male NPT 3 8 Cross KQ2TW
elbow NPT 3 8 elbow NPT 1 2
NPT 1 2 Triple NPT 1 8 Bulkhead
10-32UNF branch NPT 1 4 male KQ2LE
Universal universal KQ2ZT elbow
NPT 1 8 male NPT 3 8
male KQ2V NPT 1 4 elbow NPT 1 2 Different 5 32
elbow NPT 3 8 NPT 1 8 dia. KQ2X
3 16
NPT 1 2 Female NPT 1 4 Plug-in 1 4
Hex. 10-32UNF connector KQ2F NPT 3 8 "Y" 5 16
socket NPT 1 8 NPT 1 2
head NPT 1 8
universal KQ2VS NPT 1 4 Nipple KQ2N
male NPT 3 8 Female NPT 1 4
elbow NPT 1 2 elbow KQ2LF NPT 3 8 5 32
Double 10-32UNF NPT 1 2 3 16
NPT 1 8 5 32 Reducer 1 4
universal
KQ2VD NPT 1 4 3 16 nipple KQ2N 5 16
male Different 1
NPT 3 8 4 3 8
elbow NPT 1 2 dia. KQ2H 5 16 1 2
10-32UNF straight 3 8 Tube
Universal NPT 1 8 1 2 KQ2C
cap
female KQ2VF NPT 1 4 5 8
elbow NPT 3 8 5 32
NPT 1 2 3 16
Different 1
Branch 10-32UNF 4
dia. KQ2T 5
universal NPT 1 8 16
tee 3
male KQ2Z NPT 1 4 8
NPT 3 8 1 2
elbow NPT 1 2
∗Refer to p.2.1-11 and 2.1-12 for more information on styles.
2.2-15
2.1-69 to 2.3-8 3/3/99 9:12 PM Page 2.2-22
∗∗
Series KS (Standard)
Applicable Tubing — Inch-size
Cassette (Red)
The half union style is equipped
Slide bearing with a “ tube rotation prevention
Smooth operation and longer life are provided mechanism.”
from an oil containing slide bearing.
Rotary seal
A special rotary seal minimizes friction while
providing an excellent seal.
Holder
Standard nickel plated allows copper-free
applications.
Ball bearing
A ball bearing ensures low-torque rotation.
Stud
Threads are coated with a TeflonTM based
sealant for quick assembly.
2.2-22
2.1-69 to 2.3-8 2/19/99 4:18 PM Page 2.2-23
Series KS
Series KS
Applicable tube O.D.(inch)
Model Connection thread
ø5 32 " ø1 4 " ø 5 16 " ø3 8 "
Male connector
10-32 UNF
KSH
NPT 18
NPT 14
NPT 38
Male elbow
10-32UNF
KSL
NPT 18
NPT 14
NPT 38
Precautions
Be sure to read before handling.
Refer to p.0-26 and 0-27 for Safety Instructions and common
precautions on the products mentioned in this catalog, and refer to
p.2.0-7 and 2.0-8 for more detailed precautions of every series.
Caution
qMinimize the load shown below to protect the ball bearing. A flexible polyurethane tube is rec-
ommended.
2.2-23
2.1-69 to 2.3-8 2/19/99 4:19 PM Page 2.2-24
∗∗
<NPT> <NPT>
5 32
10-32 UNF KSL03-32 8 20.5 22 9
10.4 12 21 16 2.5 3.5 3.5
18 KSL03-34S 12.7 22 23.5 14
18 KSL07-34S 23 25.5 17
14 14.29 13.2 14 23.5 17 4 8.6 8.6
14 KSL07-35S 26 26.5 23
18 KSL09-34S 26.5 30 23
5 16 17.46 15.2 17 26 18.5 6 21.6 14.9
14 KSL09-35S 29.5 31 29
14 KSL11-35S 34 37 56
38 22.23 17.9 22 31.5 21 7 30.5 25.0
38 KSL11-36S 35 38 64
SKSINCH, #9 to #16 ∗ Reference dimensions after NPT thread installation.
<NPT>
<NPT>
Kl
Ml
Hl
Dl
MS
Tl
2.2-24
2.0-0 to 2.1-46 2/19/99 4:49 PM Page 2.1-31
∗∗
Cassette
The male connector is equipped with a “tube
Slide bearing rotation prevention mechanism.”
Smooth operation and longer life from an oil Series KS Blue
containing slide bearing. Series KX White
Rotary seal
A special rotary seal minimizes friction while
providing an excellent seal. Series KX (High speed)
Scraper
Holder
Prevents chips from in-
Standard nickel plated allows copper-free truding into bearing parts.
applications.
Rotary seal
Ball bearing X ring shape minimizes
friction while providing Ball bearing
A ball bearing ensures low torque rotation.
an excellent seal. A ball bearing ensures
Seal is fire and
Stud Series KS shock proof fluo-
low torque rotation.
SUS440C improves
Threads are coated with a TeflonTM based (Standard) rine rubber. Proves
against high friction heat
corrosion resistance.
sealant for quick assembly.
in high speed rotation ∗Other parts’ specifications are same
and longer life. as those of Series KS.
Male elbow
Component Materials
Male connector Principal element Series KS Series KX
Body PBT
Stud, Holder, Guide C3604BD (electroless nickel plated), SUS304
Chuck, Retainer Stainless steel (SUS304) (1)
Collet, Release button, Snap ring Polyacetal
O ring, Packing NBR
Rotary seal NBR FPM
Slide bearing Oil-containing polyacetal
Scraper NBR
Ball bearing Bearing steel Stainless (SUS440C)
Gasket Stainless steel (SUS304), NBR
Note1) Retainer (C) of Series KX: C3604BD (electroless nickel plated)
2.1-31
2.0-0 to 2.1-46 2/19/99 4:49 PM Page 2.1-32
Series KS/Series KX
Applicable tube O.D. (mm)
Model Connection thread
ø4 ø6 ø8 ø10 ø12
Male connector
M5 X 0.8
KSH
KXH
M6 X 1.0
R(PT) 18
R(PT) 14
R(PT) 38
R(PT) 12
Male elbow
M5 X 0.8
KSL
KXL
M6 X 1.0
R(PT) 18
R(PT) 14
R(PT) 38
R(PT) 12
Precautions
Be sure to read before handling.
Refer to p.0-26 and 0-27 for Safety Instructions and common precautions on
the products mentioned in this catalog, and refer to p.2.0-7 and 2.0-8 for
more detailed precautions of every series.
Caution
qMinimize the load shown below to protect the ball bearing. A flexible polyurethane tube is
recommended.
Kl
Ml
Hl
Dl
MS
Tl
2.1-32
2.0-0 to 2.1-46 2/19/99 4:49 PM Page 2.1-33
∗∗
Series KS/KX
2.1-33
2.0-0 to 2.1-46 2/19/99 4:50 PM Page 2.1-34
∗∗
Hl
Dl
MS
Tl
2.1-34
2.1-69 to 2.3-8 2/19/99 4:19 PM Page 2.2-25
∗∗
Series KM
Applicable Tubing — Inch-size
Applicable Tubing
Tube material Nylon, Soft nylon, Polyurethane
Tube O.D. ø 5 32, ø 1 4, ø 5 16 , ø 3 8, ø 1 2
KM11
Specifications
Model KM11 KM12
Fluid Air, Water (1)
KM12 Max. operating pressure 1.0MPa
Proof pressure 3.0MPa
Ambient and fluid temperature –5 to 60°C (Water: 0 to 40°C) (No freezing)
ANSI/ASMEB1.20.
Thread —
1-1983 (NTP thread)
Note1) Applicable for general industry water. Consult SMC if using for other kinds of fluid.
Surge pressure must be under the max. operationg pressure.
Component Materials
Model KM11 KM12
Body PBT
Stud — C3604BD
Chuck SUS304
Guide SUS304, C3604BD
Collet, Release button POM
Packing, O ring NBR
Construction
KM11 KM12
2.2-25
2.1-69 to 2.3-8 3/4/99 8:35 AM Page 2.2-26
KM11
KM12
5 32 14
KM12-03-35-6 6 87 40 65
17.46 10 18 29.5 19.5 29 10.6 12 16 6
KM12-03-35-10 10 110 61.5 72
KM12-07-35-6 6 95 48 82
14 14 17.46 10 19.5 31.5 21.5 31.25 13.2 13 17 7
KM12-07-35-10 10 121 73.5 92
KM12-09-36-6 6 102 52.8 97
5 16 38 22.22 12.7 23.7 37.7 25 37.5 15.2 15 18.5 9.5
KM12-09-36-10 10 132 83 112
Kl
Precautions for the use with One-touch fittings
Ml
Caution
Refer to “Air Fittings & Tubing Precautions” for the installation/removal of One-touch fittings and Hl
other precautions.
Dl
MS
Tl
2.2-26
2.1-69 to 2.3-8 2/19/99 4:20 PM Page 2.2-27
∗∗
Series KDM
Connecting Tubing: 10, 20
One-touch connection/
disconnection of con- Packing With One-touch fittings
Socket case
Applicable Tubing
Tube material Nylon, Soft nylon, Polyurethane
Tube O.D. ø1 8, ø 5 32, ø 1 4, ø 5 16
KDM10 Specifications
Fluid Air
Max. operating pressure 1.0MPa
Max. operating vacuum pressure –100kPa
Proof pressure 1.5MPa
Ambient and fluid temperature –5 to 60°C (No freezing)
2.2-27
2.1-69 to 2.3-8 3/4/99 9:05 AM Page 2.2-28
∗∗
Part No.
Color of
Connector Tube O.D. Part No.
release button wShift the panel mounting bracket to the inside (Move
ø1 8 KDMP-01 the screw for bracket in the longitudinal direction of
ø 5 32 KDMP-03 the slot) and put the connector in the panel mount-
Plug connector
ø1 4 KDMP-07 ing hole. (Panel mounting hole: See Dimensions.)
ø 5 16 KDMP-09
Red
ø1 8 KDMS-01
Socket connector ø 5 32 KDMS-03
(With packing) ø 14 KDMS-07
ø 5 16 KDMS-09
qLoosen the cross recessed head machine wAfter exchanging connectors in desired
screw using a Phillips screwdriver to places, fix the plate with a Phillips screw-
remove the plate from the case. driver to the case. eAfter shifting the bolt for bracket to the out
side, tighten the bolt with a Phillips screw-
driver to fix the socket case.
Kl
Ml
Hl
rLoosen the screw for bracket until the
bracket touches the stop ring and shift the Dl
bracket to the inside to remove the con-
nector from the panel. MS
Tl
2.2-28
2.1-69 to 2.3-8 2/19/99 4:20 PM Page 2.2-29
Series KS
Dimensions
KDM10
( ): Dimensions for KDM10-09
KDM20
( ): Dimensions for KDM20-09
KDM10 SKDM102, #1 to #4
KDM20 SKDM202, #1 to #4
2.2-29
2.3-21 to 24 2/25/99 4:34 PM Page 21
∗∗
Miniature Fittings/SUS316
Series MS
Possible to use in corrosive Hose nipple
applications
Stainless Steel Material
(SUS316) Tube
Compact piping space Barb Possible for
Tube has a large retaining force. Hose nipple Configuration for easy combination use of
assures easy installation and removal. nylon tube and
insertion into the tube
Line up various styles Holds the tube tightly polyurethane tube.
Possible for special tubing in a same direction.
Accepts many styles of Body
plastic tubing Cap nut
Hose nipple and hose elbow accepts nylon, Stainless steel: SUS316
soft nylon, and polyurethane tubing. Certainly hold the tube
by manual clamping
Gasket
Easy removing the
Light clamping torque
tube by loosening
Tight seal
Stainless steel: SUS316
Barb fitting
Barb
Configuration for easy Tube
insertion into the tube
Holds the tube tightly
Gasket
Body Light clamping
torque. Sure seal.
Stainless steel: SUS316
Specifications
Applicable tube material Nylon Soft nylon Polyurethane
ø4/ø2.5 ø4/ø2.5 ø3.18/ø2
Applicable tube dia. ø3.18/ø2.18
ø6/ø4 ø6/ø4 ø4/ø2.5, ø6/ø4
2.3-21
2.3-21 to 24 2/25/99 4:34 PM Page 22
∗∗∗
Model
Model Style Application Tube O.D./I.D. Model Style Application Tube O.D./I.D.
Barb fitting For soft nylon ø3.18/ø2.18 Universal Body rotates at
tube X M5 elbow 360° around the M5 female
MS-5AU-3 MS-5UL stud axis
For polyurethane X M5 male
tube ø3.18/ø2 X M5
P.2.3-23
For soft nylon and Universal Body rotates at
polyurethane tube tee 360° around the M5 female
MS-5AU-4 ø4/ø2.5 X M5 MS-5UT stud axis X M5 female
X M5 male
P.2.3-23
Bushing For reducing
Rc(PT)1 8 female to
MS-5AU-6 ø6/ø4 X M5 MS-5B Rc(PT)1 8male
M5 female
X M5 female
P.2.3-23 P.2.3-24
Barb elbow For soft nylon tube ø3.18/ø2.18 Plug To plug unused
X M5 M5 port
MS-5ALHU-3 MS-5P
For polyurethane
tube ø3.18/ø2 X M5
P.2.3-24
IFor soft nylon Extention Solid piece-
and polyurethane fitting moves fitting up M5 male
MS-5ALHU-4 tube ø4/ø2.5 X M5 MS-5J from work piece X M5 female
IBody rotates at
P.2.3-24
360° around the
stud axis Nipple Fitting to work piece
and fitting to fitting M5 male
MS-5ALHU-6 ø6/ø4 X M5 MS-5N connection X M5 male
P.2.3-23 P.2.3-24
Hose nipple For nylon, Unilversal nipple Body rotates at
soft nylon, and 360° around the M5 male
MS-5H-4 polyurethane tube ø4/ø2.5 X M5 MS-5UN stud axis X M5 male
PAT
P.2.3-24
Barb tee For soft nylon tube ø3.18/ø2.18
for soft tubing X M5
MS-5H-6 ø6/ø4 X M5 MS-5ATHU-3
For polyurethane
tube ø3.18/ø2 X M5
P.2.3-23
Hose elbow IFor nylon, IFor soft nylon
soft nylon, and and polyurethane
MS-5HLH-4 polyurethane ø4/ø2.5 X M5 MS-5ATHU-4 tube ø4/ø2.5 X M5
tube
IBody rotates at
IBody rotates at 360° around the
360° around the stud axis
stud axis
MS-5HLH-6 ø6/ø4 X M5 MS-5ATHU-6 ø6/ø4 X M5
P.2.3-23 P.2.3-24
Gasket To seal M5 thread Gasket (H) MS-5ALHU-6 Kl
MS-5HLH-4 Material:
M-5G1 Material: PVC M-5GH MS-5HLH-6 Nylon 66
MS-5ATHU-6 GF 30% Ml
P.2.3-24 P.2.3-24 only
Hl
Dl
MS
Tl
2.3-22
2.3-21 to 24 2/25/99 4:35 PM Page 23
∗∗
Series MS
MS-5ALHU-6
2.3-23
2.3-21 to 24 2/25/99 4:35 PM Page 24
∗∗∗
Tightening of M5 thread
Caution
qTighten by hand, and give it an additional 1/4 rotation with a wrench.
(The additional rotation should be doubled to 1/2 when using the
universal elbow, universal tee, etc. which have two gaskets.) If tight-
MS-5ATHU-6 ened too much, thread portion may be damaged and gasket may be
deformed. This will cause air leakage. On the contrary, if tightening
is not sufficient, thread may loosen causing air leakage.
2.3-24
2.4-1 to 2.5-6 2/25/99 5:03 PM Page 2.4-3
∗∗
Polyurethane Tubing
Series TU,TIUB
For general air pressure Series Table : 20m roll : 100m roll
tubing Tube size
Metric size (Series TU) Inch size (Series TIUB)
Orange color now becomes Model TU0425 TU0604 TU0805 TU1065 TU1208 TIUB01 TIUB05 TIUB07 TIUB11 TIUB13
standard Tube O.D. (mm) 4 6 8 10 12 3.18 4.76 6.35 9.53 12.7
100m roll available for all Tube I. D. (mm) 2.5 4 5 6.5 8 2 3.18 4.23 6.35 8.46
Precautions
Be sure to read before handling. How to Order
Refer to p.0-26 and 0-27 for Safety
Instructions and common precautions on
the products mentioned in this catalog, and
TU0425 BU 20
refer to p.2.0-7 and 2.0-8 for more detailed Indication of tube Length per roll
precautions of every series. model Symbol Roll size∗
Color indication 20 20m roll Kl
Caution Symbol Color 100 100m roll
qApplicable for general industry water. B Black Ml
Consult SMC if using for other kinds of flu- W White
ids. Surge pressure must be under the
max. operating pressure. If exceeding that
R Red Hl
BU Blue
value, fitting may damaged and tubing may Y Yellow
burst. G Green w 20m roll for Inch size Dl
wThe value of the max. operating pressure is C Clear (except black and white)
at a temperature of 20°C. Refer to the burst YR Orange MS
pressure characteristics curve for other Suffix “-X4” to the end of part number.
Ex.) TIUB01Y-20- X4
temperatures. Avoid abnormal temperature Made to Order Tl
rises which may burst the tubing.
eThe values of the min. bending radius is at q 100m roll for Metric size (black,
a temperature of 20°C. Higher tempera- white, red, blue, yellow, green) e Longer roll length (black, white,
tures allows the tubing to bend more. and Inch size (black, white, red, red, blue, yellow, green)
blue, yellow, green) Suffix “-X3” to the end of part number.
Suffix “-X3” to the end of part number. Ex.) TU0425B-500- X3
Ex.) TIUB01Y-100- X3 ∗ Available 150m for ø10, 200m for ø8, 500m for ø4
∗ Consult SMC in case of ø16. and ø6. Contact SMC for other lengths.
2.4-3
2.4-1 to 2.5-6 2/25/99 5:03 PM Page 2.4-1
∗∗
Nylon Tubing
Series T,TIA
For general air tubing Series Table : 20m roll : 100m roll
Specifications
Fluid Air, Water
Max. operating
pressure 1.5MPa at 20°C
Precautions
Be sure to read before handling. How to Order
Refer to p.0-26 and 0-27 for Safety
Instructions and common precautions on
the products mentioned in this catalog, and
T0425 B 20
refer to p.2.0-7 and 2.0-8 for more detailed Indication of tube Length per roll
precautions of every series. model Symbol Roll size∗ Kl
Color indication 20 20m roll
Caution Symbol Color 100 100m roll Ml
qApplicable for general industrial water. B Black (Black and white only)
Consult SMC if using for other kinds of W White
fluid. Surge pressure must be under the R Red
Hl
max. operating pressure. If exceeding that BU Blue
w 20m roll for Inch size Dl
value, fitting may be damaged and tubing Y Yellow
may be burst. (except black and white)
G Green
wThe value of the max. operating pressure Suffix “-X4” to the end of part number. MS
is at a temperature of 20°C. Refer to the Ex.) TIA01BU-20- X4
burst pressure characteristics curve for Made to Order
other temperatures. Avoid abnormal tem-
Tl
q 100m roll for Metric size (black,
perature rise which may burst the tubing.
white, red, blue, yellow, green) e Longer roll length (black, white,
eThe values of the min. bending radius is at
and Inch size (black, white, red, red, blue, yellow, green)
a temperature of 20°C and O.D. variable
blue, yellow, green)
rate 10% max. In case that operating tem- Suffix “-X3” to the end of part number.
perature is higher than 20°C, O.D. variable Suffix “ -X3” to the end of part number. Ex.) T0425B-500- X3
rate may be over 10% even if bending Ex.) T0425R-100- X3 ∗ Available 150m for ø10, 200m for ø8, 500m for ø4
∗ Consult SMC in case of ø16. and ø6. Contact SMC for other lengths.
radius is within the specified range.
2.4-1
2.4-1 to 2.5-6 2/25/99 5:03 PM Page 2.4-2
∗∗
Series TS,TISA
For general air pressure Series Table : 20m roll : 100m roll
Black (B)
Specifications
Fluid Air
Max. operating
pressure 1.0MPa at 20°C
Material Nylon 12
Precautions
Be sure to read before handling. How to Order
Refer to p.0-26 and 0-27 for Safety
Instructions and common precautions on
the products mentioned in this catalog, and
TS0604 W 100
refer to p.2.0-7 and 2.0-8 for more detailed Indication of tube Length per roll
precautions of every series. model Symbol Roll size∗
Color indication 20 20m roll
Caution Symbol Color
100 100m roll
qUse nylon or polyurethane tubing for gen- B Black (Black and white only)
eral industry water. If using soft-nylon tub- W White
ing, air leakage or tubing coming out R Red
caused by the contraction may occur. BU Blue
w 20m roll for Inch size
wThe value of the max. operating pressure Y Yellow
is at a temperature of 20°C. Refer to the G Green
(except black and white)
burst pressure characteristics curve for Suffix “-X4” to the end of part number.
other temperatures. Avoid abnormal tem- Ex.) TISA01BU-20- X4
perature rises which may burst the tubing. Made to Order
eThe value of the min. bending radius is at q 100m roll for Metric size (black,
a temperature of 20°C and O.D. variable white, red, blue, yellow, green) e Longer roll length (black, white,
rate 10% max. In case that operating tem-
and Inch size (black, white, red, red, blue, yellow, green)
perature is higher than 20°C, O.D. variable
blue, yellow, green)
rate may be over 10% even if bending Suffix “-X3” to the end of part number.
radius is within the specified range. Suffix “-X3” to the end of part number. Ex.) TS425B-500- X3
Ex.) TS0604BU-100- X3 ∗ Available 150m for ø10, 200m for ø8, 500m for ø4
∗ Consult SMC in case of ø16. and ø6. Contact SMC for other lengths.
2.4-2
2.4-1 to 2.5-6 2/25/99 5:04 PM Page 2.4-4
∗∗
Series TUS
Suitable for piping in Series Table : 20m roll : 100m roll
confined spaces Model TUS0425 TUS0604 TUS0805 TUS1065 TUS1208
Extremely flexible Tube O.D. (mm) 4 6 8 10 12
Soft Polyurethane Tubing Tube I.D. (mm) 2.5 4 5 6.5 8
Black (B)
TUS related accessories White (W)
lnner Sleeve Red (R)
Specifications
Fluid Air
Max. operating pressure 0.6MPa at 20°C
Burst pressure Refer to burst pressure characteristics curve.
Applicable tube fitting One-touch fitting, Insert tube fitting, Hose nipple (3)
Min. bending radius (mm) (2) 8 15 15 22 29
Model Operating temperature –20 to +60°C (No freezing)
Part No. Applicable tube model Length Material Polyurethane
TJ-0425 TUS0425 18 Tube drawing Without
inner sleeve 15 60 60 85 110
TJ-0604 TUS0604 19 strenght N
(Using One-touch fitting) With
TJ-0805 TUS0805 20.5 inner sleeve 80 230 250 300 480
TJ-1065 TUS1065 23 Note1) Not clear but opaque due to material.
TJ-1208 TUS1208 24 Note2) Min. bending radius is measured as shown in the figure below.
Specifications
Material C2700T (Nickel plated) Bend the tube into U-form at a Burst Pressure Characteristics Curve
Wall thickness 0.2mm temperature of 20°C.
Fix one end and close loop
∗∗
Accessories/Tools
Multi-tube Holder
Series TM
Easy arrangement of tubing Applicable Tubing Specifications
Nylon, Soft nylon, Ambient
Tube material temperature –20 to 60°C
Polyurethane
Easy loading and firm hold- Tube O.D. ø4, ø6, ø8, ø10, ø12 Flame resistance polypropylene
Material
ing of tube (UL-94 standard, V-0)
Color Black
For mounting
Cross recessed head counter-
Possible to separate options sunk tapping screw
depending on number of Model (Black zinc chromate treatment)
Multi-tube Holder/Dimensions
N Mounting
Tube O.D. (No. of
P L1 L2 W1 W2 W3 H1 H2 øD screw
Model holding
(mm)
parts) Nominal X Length
4 TM-04 12 6 3.25 72.5 4.5 8 17 5 7.5 2.2 2X6
6 TM-06 12 7.5 4.5 91.5 5.5 10 21 6.5 10 2.8 2.6 X 8
8 TM-08 8 9.5 5.5 77.5 6 11 23 7.5 12 2.8 2.6 X 8
10 TM-10 6 12.5 7.5 77.5 6.5 12 25 8.8 14.3 3.2 3X8 Kl
12 TM-12 6 15 9 93 6.5 12 25 9.8 16.3 3.2 3X8
Ml
How to Use
Hl
Caution wInstall the multi-tube holder to equip-ment
qCut the multi-tube holder depending on number by use of the phillips head recessed, coun-
tersunk tapping screw. Dl
of tubes to be connected.
<Cutting method>
eLay the tube across the gripper and push
on the tube. MS
Cut the groove for rFor removing the tubes, pull up the tubes
separation with side
cutters.
from the gripper. Tl
2.5-1
2.4-1 to 2.5-6 3/4/99 1:35 PM Page 2.5-2
∗∗
Accessories/Tools
Multi-holder
Series TMA
Can be used to secure the Specifications
KElseries exhaust valve Ambient temperature (°C) –20 to 60°C
Material Flame resistance polypropylene (UL-94 standard V-0)
with One-touch fitting Color Black
One-touch fitting
Model
can also be secured. Number of Applicable Applicable one touch fitting
Model
Union tee: KQT tubes exhaust valve Union tee Union elbow Straight union
KEA06
Elbow: KQL TMA-06 8
KEB06
KQT06-00 KQL06-00 KQH06-00
Tube O.D.
Model P L W H1 H2 Q
(mm)
2.5-2
2.4-1 to 2.5-6 2/25/99 5:09 PM Page 2.5-3
Accessories/Tools
Tube Cutter
Series TK
Tube Cutter: TK-1
Perpendicular cutting
Reduced operating force
Enclosure/safety lock contained
Kl
Ml
Hl
Dl
MS
Tl
Note) Never cut metals such as electric wires.
Part No. TK-2
Nylon, soft nylon, polyurethane, and other soft
Tube material
plastic tube
Tube O.D. 18mm or less
Weight 140g
2.5-3
2.4-1 to 2.5-6 2/25/99 5:11 PM Page 2.5-4
Accessories/Tools
Tube Cutter
Series TK
Tube Cutter: TK-3 (Useful type)
Safety lock contained.
2.5-4
2.4-1 to 2.5-6 3/4/99 1:36 PM Page 2.5-5
∗∗
Accessories/Tools
Tube Releasing Tool
Series TG
PFor loading and unloading of tubes for One-touch fittings
mounted in a narrow space or on manifolds.
PEasy one-hand operation
PAvailable for two sizes of applicable tubes. Easy exchange
with one hand.
How to Use
Caution
Process Size change
q Put the end of tool into the release button Push both sides at once to release. Reverse
parallel to the tube. and fix at the same position as before.
Applicable tube size is indicated on the back
side.
Kl
w After inserting, grasp the handle tightly and
insert the end of the tubing to the stroke Ml
end.
2.5-5
2.4-1 to 2.5-6 2/25/99 5:12 PM Page 2.5-6
∗∗
18 18
Male 14 Male 14
connector KQH 38 connector KQH 38
12 12
18 18
Male 14 Male 14
KQL elbow KQL
elbow 38 38
12 12
Hexagon
18 ∗ Refer to the catalog No. CAT. E505 for
socket 14 the details.
head KQS
male 38
connector 12
18
45˚ 14
Male KQK
elbow 38
12
18
Universal 14
male KQV
38
elbow
12
2.5-6