Beruflich Dokumente
Kultur Dokumente
Typical Applications
+ + + + +
In office and residence areas to detect CO level In undergroung parking lots and garages In BAS to detect the CO and the data transmittance For greenhouse and plant bin For ventilation control system
Specifications
Gas Sensor Sensor lifetime Warm up time Response Time Signal Update CO Measuring Range Accuracy Stability Electrochemical carbon monoxide sensor Normally more than 3 years, replaceable 1hour (first time) Within 60 seconds Is 0-500ppm(default)/O-100ppm10-1000ppm < I ppm+5%reading selectable
Temperature & Humidity Sensor (optional) Sensing element: Measuring range Accuracy Display resolution Stability
Relative Humidity Capacitive humidity sensor 0 -100%RH k4.O%RH (25"C, 15%-85%RH) O.I%RH kl%RH per year
Outputs
LCD Display (optional) Analog Output Analog Output Resolution Relay dry contact Output Modbus Interface Display CO measurement or CO+ temperature& humidity measurements 1x0-IOVDC or 4-20mA linear output 16Bit Up to two dry-contact outputs Max, switching current 3A (230VACl30VDC), resistance Load Modbus RS-485 with 19200bps(default),other rates selectable in the order. 15KV antistatic protection
Wiring Diagram
Models Guide
TKG- CO- 1 X Y Z C - R-TH
1: wall mounted with the external sensor in an adown probe
X: analog output
0: no analog output 1: 1x0-1 OVDC linear output(default) 2: 1x4-20mA linear output (default)
3: 1x0-IOVDC output and can be switch to 4-20mA (just for only one analog output)
Z: Communication interface
0: no communication 1: Modbus RS485 interface
-NL(option) No LCD display for the transmitter with the analog linear output or with the Modbus interface.
For example: TKG-CO-1101-001-TH indicates the CO detector with 1x0-IOVDC linear output and Modbus interface. CO range:O-100ppm. It has temperature and humidity detection and display.